Potential Source Of Microplastics Research Articles

Microplastic pollution in tropical coral reef ecosystems from the coastal South China Sea and their impacts on corals in situ

Coral reefs possess extremely high ecological value in tropical and subtropical waters worldwide. Microplastics as emerging and pervasive pollutants pose a great threat to the health of coral ecosystems. However, in situ studies on microplastics pollution and its impacts in coral ecosystems globally are limited. The occurrence characteristics of microplastics in the environment mediums and reef-dwelling organisms were investigated in coral reef areas from the southern Hainan Island, and the impacts of microplastics on corals in situ were evaluated in this study. Average microplastics abundance was 9.48 items L-1 in seawater, 190.00 items kg-1 in sediment, 0.36 items g-1 in coral, 1.50 items g-1 in shellfish, 0.48 items g-1 in fish gill, and 1.71 items g-1 in fish gastrointestinal tract. The prevalent microplastics in the above samples were characterized as being less than 1000 µm in size, fibrous, and transparent, with predominant polymer types as polyethylene terephthalate, polypropylene, polyethylene, and rayon. The microplastic enrichment capacity of different corals varied (Pocillopora >Acropora >Sinularia). Notably, microplastics were more abundant on the surface of corals compared to their interiors, with distinct characteristics observed, including larger-sized (>500 µm) and fiber-shaped polyethylene terephthalate microplastics on the surface and smaller-sized (20–200 µm) fragmented polyethylene microplastics within coral interiors. Furthermore, the investigation showed species-specific impacts of microplastics on corals in situ, including photosynthetic activity of photosymbionts and antioxidant and immune activities of corals. Furthermore, the ecological risks of microplastics were minor across most environmental media in the studied areas, with exceptions in the bottom seawater and surface sediment of YLW, which exhibited extreme and medium risk levels, respectively. Coral risk levels were generally medium, except for dangerous levels in DDH and high levels in LHT. The potential sources of microplastics in the marginal reefs of southern Hainan Island were primarily tourism, residential, and fishing activities.

Response of terrestrial crustacean Porcellio scaber and mealworm Tenebrio molitor to non-degradable and biodegradable fossil-based mulching film microplastics

Agricultural mulching films are potential sources of microplastics (MPs) in soil. As an alternative to conventional non-degradable mulching films, a variety of different biodegradable mulching films are used. However, it is not yet known whether MPs from biodegradable mulching films pose a lower risk to terrestrial invertebrates compared to MPs from conventional mulching films. In this study, the effects of MPs produced from two conventional polyethylene (PE-1 and PE-2) and two biodegradable (starch-based poly(butylene adipate co-terephthalate); PBAT-BD-1, and PBAT-BD-2) fossil-based mulching films on terrestrial crustacean woodlice Porcellio scaber and mealworm Tenebrio molitor were compared. A key finding was that no clear differences in induced responses between biodegradable and conventional MPs were detected. No adverse effects on P. scaber after two weeks and on T. molitor after four weeks of exposure were observed up to 5 % (w/w dry soil) of either MP type. However, some sublethal physiological changes in metabolic rate and immune parameters were found in P. scaber after two weeks of exposure indicating a response of organisms to the presence of MP exposure in soil. In addition, it was demonstrated that both types of MPs might affect the soil water holding capacity and pH. In conclusion, we confirmed that biodegradable MPs can induce responses in organisms hence further studies testing the environmental hazard of biodegradable MPs are justified.

Coated and un-coated urea incorporated with organic fertilizer improves rice nitrogen uptake and mitigates gaseous active nitrogen loss and microplastic pollution

Coated urea can improve nitrogen use efficiency (NUE) for crops, while it is also identified as a potential source of microplastics (MPs). Organic fertilizer (OF) shows potential to promote MPs degradation. However, little is known about the influence of OF incorporated with coated urea on MPs accumulation, NUE, and gaseous N loss (NH3 and N2O) in paddies. Therefore, a field experiment was conducted to address this gap, with five fertilization treatments, viz., urea (un-coated) with full rates (U), coated urea with full rates (CU), coated urea with reduced rates (RCU), 70 % coated urea blending 30 % urea with reduced rates (RBU), and RBU blending OF (ORBU). The results showed that, compared with U, the CU increased the number of MPs by 62.2–117.4 %. The ORBU significantly reduced the weight of MPs by 53.2 % through decreasing large-particle size. Additionally, the ORBU enhanced the effect of CU on increasing grain yield and NUE, mainly due to the improvement in the yield components and N uptake. The distribution of NH4+ in water and soil was a major factor driving NH3 and N2O emissions. The ORBU elevated activities of N-assimilation enzymes, decreased water NH4+ and NH3 emissions, and increased soil NH4+ and ammonium-oxidation bacteria and (nirK+nirS)/nosZ, ultimately increased soil N2O emissions compared with RBU. However, the reduction in NH3 much outweighed the increase in N2O emissions. In conclusion, this study highlighted coated urea as a source of MPs pollution, emphasized OF amendment as a strategy to diminish MPs accumulation, and found that OF incorporated with coated urea could increase grain yield and N uptake of rice while mitigating gaseous N loss in paddies.

Environmental fate of microplastics in high-altitude basins: the insights into the Yarlung Tsangpo River Basin

Microplastics (MPs) have been found in remote high-altitude areas, but the main source and migration process remained unclear. This work explored the characteristics and potential sources of MPs in the Yarlung Tsangpo River Basin. The average abundances of MPs in water, sediment, and soil samples were 728.26 ± 100.53 items/m3, 43.16 ± 5.82 items/kg, and 61.92 ± 4.29 items/kg, respectively, with polypropylene and polyethylene as the main polymers. The conditional fragmentation model revealed that the major source of MPs lower than 4000 m was human activities, while that of higher than 4500 m was atmospheric deposition. Community analysis was further conducted to explore the migration process and key points of MPs among different compartments in the basin. It was found that Lhasa (3600 m) and Shigatse (4100 m) were vital sources of MPs inputs in the midstream and downstream, respectively. This work would provide new insights into the fate of MPs in high-altitude areas.

Prevalence of Microplastics in Coastal Area of Samae San, Thailand and Its Possible Source

This research explored the abundance, morphology, and polymer composition of microplastics (MPs) in various environmental samples within the Samae San subdistrict involving surface soil nearby the dumping site, road dust soil, beach sand and sediment in the area with distinct land- based activities. Dumping site soil exhibited the highest concentration in items per kg of dry weight at 93,734.3, followed by road dust soil (573.0 ± 583.7), beach sand (99.8 ± 75.3), and sediment (83.1 ± 50.4). Morphological traits revealed similarities between transparent fiber-shaped particles in beach sands and sediment, and those in nearby road dust soil, while green sheet-shaped particles dominated in dumping site soil. Predominant polymer types included PE, PET, and PP, associated with daily plastics, fishing gear, and fishing nets. In beach sand and sediment samples, transparent polyamide (nylon) fibers shaped like microplastics (MPs) were notably observed, as it is a common material used in fishing nets. Cluster analysis indicated a resemblance between MPs in beach sand, sediment, and nearby road dust soil, implying that plastic debris, comprising single-use plastics and fishing equipment, could be a potential source of MPs in coastal areas.

Microplastic Contamination of Non-Mulched Agricultural Soils in Bangladesh: Detection, Characterization, Source Apportionment and Probabilistic Health Risk Assessment.

Microplastic contamination in agricultural soil is an emerging problem worldwide as it contaminates the food chain. Therefore, this research investigated the distribution of microplastics (MPs) in agricultural soils without mulch at various depths (0-5, 5-10, and 10-15 cm) across different zones: rural, local market, industrial, coastal, and research areas. The detection of MP types and morphology was conducted using FTIR and fluorescence microscopy, respectively. Eight types of MPs were identified, including high-density polyethylene (HDPE), low-density polyethylene (LDPE), polypropylene (PP), polyethylene terephthalate (PET), polyvinyl chloride (PVC), polyvinyl fluoride (PVF), polyvinyl alcohol (PVA), and polytetrafluoroethylene (PTFE), with concentrations ranging from 0.6 ± 0.21 to 3.71 ± 2.36 MPs/g of soil. The study found no significant trends in MP concentration, with ranges of 0-2.1 ± 0.38, 0-2.87 ± 0.55, and 0-2.0 ± 0.34 MPs/g of soil at depths of 0-5 cm, 5-10 cm, and 10-15 cm, respectively. The highest MP quantity was recorded at 8.67 in coastal area, while the lowest was 6.44 in the local market area. Various MP shapes, e.g., fiber, film, pellet, fragment, and irregular, were observed across all layers. PCA suggested irrigation and organic manure as potential sources of MPs. The estimated concentrations of MPs possessed low non-carcinogenic and carcinogenic risks to the farming community of Bangladesh.

Toy building bricks as a potential source of microplastics and nanoplastics

Microplastics and nanoplastics have become noteworthy contaminants, affecting not only outdoor ecosystems but also making a notable impact within indoor environments. The release of microplastics and nanoplastics from commonly used plastic items remains a concern, and the characterisation of these contaminants is still challenging. This study focused on evaluating the microplastics and nanoplastics produced from plastic building bricks. Using Raman spectroscopy and correlation analysis, the plastic material used to manufacture building blocks was determined to be either acrylonitrile butadiene styrene (correlation value of 0.77) or polycarbonate (correlation value of 0.96). A principal component analysis (PCA) algorithm was optimised for improved detection of the debris particles released. Some challenges in microplastic analysis, such as the interference from the colourants in the building block materials, was explored and discussed. Combining Raman results with scanning electron microscopy - energy-dispersive X-ray spectroscopy, we found the scratches on the building blocks to be a significant source of contamination, estimated several thousand microplastics and several hundred thousand nanoplastics were generated per mm2 following simulated play activities. The potential exposure to microplastics and nanoplastics during play poses risks associated with the ingestion and inhalation of these minute plastic particles.

Are native microalgae consortia able to remove microplastics from wastewater effluents?

Wastewater Treatment Plants (WWTPs) are potential sources of microplastics (MPs) in the aquatic environment. This study aimed to investigate the potential of wastewater-native microalgae consortia to remove MPs from the effluent of two different types of WWTPs as a dual-purpose solution for MPs mitigation and biomass production. For that purpose, the occurrence of MPs from two types of WWTP effluents was analysed over one year. MPs were characterized in terms of morphology (microbead, foam, granule, irregular, filament and film), colour and size. The wastewater characterisation was followed by the removal of MP loads, using native microalgae consortia, pre-adapted to the wastewater effluent. Microalgae consortia evolved naturally through four mitigation assays, adapted to seasonal conditions, such as temperature, photoperiod, and wastewater composition. MPs were present in all the effluent samples, ranging from 52 to 233 MP L−1. The characterisation of MPs indicated a predominance of white and transparent particles, with irregular and filament shapes, mainly under 500 μm in size. The μFTIR analysis revealed that 43% of the selected particles were plastic, with a prevalence of polypropylene (PP) (34%) and polyethylene terephthalate (PET) (30 %). In the mitigation experiments, substantial biomass production was achieved (maximum of 2.6 g L−1 (d.w.)), with successful removal of MPs, ranging from 31 ± 25% to 82 ± 13%. These results show that microalgae growth in wastewater effluents efficiently promotes the removal of MPs, reducing this source of contamination in the aquatic environment, while generating valuable biomass. Additionally, the strategy employed, requires minimal control of culture conditions, simplifying the integration of these systems in real-world WWTP facilities for improved wastewater management.

Detection and characterisation of microplastics in tap water from Gauteng, South Africa

This study reports the presence, concentration, and characteristics of microplastics (MPs) in tap water in three suburbs in Gauteng Province in South Africa. Physical characterisation was conducted using stereomicroscopy and scanning electron microscopy following staining of MPs with the Rose Bengal dye. The concentrations of MPs in all samples ranged from 4.7 to 31 particles/L, with a mean of 14 ± 5.6 particles/L. Small-sized (<1 mm) and fibrous-shaped MPs were most abundant in all samples. Fibers accounted for 83.1% of MPs in samples from all the three areas, followed by fragments (12.4%), pellets/beads (3.1%), and films (1.5%), with a minor variation in the distribution of shapes and sizes in samples from each area. Raman microspectroscopy was used for chemical analysis, and five polymers were identified, namely: high-density polyethylene, polyurethane, polyethylene terephthalate, poly(hexamethylene terephtalamide), and poly(acrylamide-co-acrylic acid). C.I Pigment Red 1, C.I. Solvent Yellow 4, Potassium indigotetrasulphonate, and C.I Pigment Black 7 were the colourants detected. These colourants are carcinogenic and mutagenic and are potentially toxic to humans. The prevalence of MPs in tap water implies their inadequate removal during water treatment. For instance, the presence of poly(AM-co-AA) suggests that drinking water treatment plants may be a potential source of MPs in tap water. Other polymers, e.g., high-density polyethylene may be released from pipes during the transportation of drinking water. The estimated daily consumption of MPs from tap water was 1.2, 0.71, and 0.50 particles/kg.day for children, men, and women, respectively. The findings of this study provide evidence of the presence of MPs in drinking water in South Africa, thus giving some insights into the performance of treatment plants in removing these contaminants and a benchmark for the formulation of standard limits for the amount of MPs in drinking water.

Occurrence, distribution and sources of microplastics in typical marine recirculating aquaculture system (RAS) in China: The critical role of RAS operating time and microfilter

Industrial mariculture, a vital means of providing high quality protein to humans, is a potential source of microplastics (MPs) which have recently received increasing attention. This study investigated the occurrence and distribution of microplastics in feed, source water and recirculating aquaculture system (RAS) with long & short operating times as well as in fish from typical industrial mariculture farms in China. Results showed that microplastics occurred in all samples with the average concentration of 3.53 ± 1.39 particles/g, 0.70 ± 0.17 particles/L, 1.53 ± 0.21 particles/L and 2.21 ± 0.62 particles/individual for feed, source water, RAS and fish, respectively. Microplastics were mainly fiber in shape, blue in color and 20–500 μm in size. Compared with short operated RAS, long operating time led to higher microplastic concentration in RAS, especially that of microplastic in 20–500 μm, granular and blue. Regardless of short or long operating time, microplastics in RAS mainly gathered in culture tank, tank before microfilter and fixed-bed biological filter, and the microfilter removed efficiently the microplastic with the shape of film, granule, fragment as well as those with size > 1000 μm. As for the polymer types, polyamide (PA, 71.9 %) and polyethylene terephthalate (PET, 65.7 %) dominated in feed and source water, respectively, which may be the reason for the high proportion of PA (38.8 % and 26.4 %) and PET (31.8 % and 30.2 %) in RAS and fish. In addition, polypropylene (PP) was also detected in RAS (18.7 %) and fish (22.6 %), indicating that other plastic facilities such as PP brush carrier also made a contribution. Positive matrix factorization (PMF) model revealed three sources of MP in RAS, namely plastic facilities, industrial sewage and plastic packaging products. Our results provided a theoretical basis for the management of MP in RAS.

The significant impacts of laundry wastewater on microplastics: a case study in a residential area

Microplastics (MPs) in urban drainage are a significant source of river pollution. Laundry waste, which can contain high levels of microfibers, is a potential source of MPs in urban drainage. This study investigated the abundance and characteristics of MPs in urban drainage channels in Ketawanggede Village, Malang City, Indonesia. The research involved stages such as inorganic and organic separation using Fe2SO4.7H2O and H2O2, density-based MPs separation, and analysis of abundance, size, color, and polymer through microscopy and FTIR. Statistical testing was performed using the Kruskal-Wallis Test in RStudio. The results showed that the abundance of MPs increased with distance from the river, with the highest abundance found at location 4 (267.44 particles/L). The MPs were dominated by small particles (<1 mm), fibers (58%), and transparent (74.3%) in color. The type of polymer was mostly polypropylene (PP) and nylon. The study also found that the abundance of microfibers was significantly higher at locations 2 and 3 (where laundries were located) compared to location 1. This suggests that laundry waste is a significant source of microfibers in urban drainage.

Occurrence characteristics and risk assessment of microplastics in agricultural soils in the loess hilly gully area of Yan' an, China

Large amounts of microplastics accumulated in the soil of agricultural fields with the rapid development of mulch agriculture. The enrichment of microplastics endangered the growth of crops and food security, and it also posed ecological risks. In this study, we investigated microplastics in a typical agriculture area of Yan' an City, in the loess hilly gully area of China. The characteristics of microplastics including their abundances, sizes, and types were measured through laser direct infrared spectrometer. The potential sources of microplastics were analyzed and the risk of soil microplastic pollution was evaluated. It was elaborated that the average abundances of microplastics in soil, water, and fertilizer were 4505 ± 435 n·kg−1, 91 ± 27 n·L−1, and 39,629 ± 10,114 n·kg−1, respectively. Microplastics with particle sizes < 100 μm accounted for >90 %. The smaller the particle size, the higher the content of microplastics. The top three polymers were polyethylene (PE, 37.4 %), polyethylene terephthalate (PET, 15.0 %), and ethylene vinyl acetate (EVA, 8.9 %), respectively. Agricultural mulch, plastic film, domestic waste, surface water irrigation, and organic compost were probably the potential sources of soil microplastics. The ecological risk evaluation showed that overall sampling sites had a minor ecological risk of microplastic pollution based on their abundance, while the polymer type showed a relatively high ecological risk for the investigated agricultural soils. Polyvinylchloride (PVC) and polymethylmethacrylate (PMMA) contribute considerably to the ecological risk, and their inputs to the farmland environment should be strictly limited. There was no significant carcinogenic risk to humans. This study would provide the basic reference for the current situation and risk assessment of farmland soil microplastics pollution in the loess hilly gully area of China.

Uptake and toxicity of micro-/nanoplastics derived from naturally weathered disposable face masks in developing zebrafish: Impact of COVID-19 pandemic on aquatic life

The unprecedented proliferation of disposable face masks during the COVID-19 pandemic, coupled with their improper disposal, threatens to exacerbate the already concerning issue of plastic pollution. This study evaluates the role of environmentally weathered masks as potential sources of microplastics (MPs) and nanoplastics (NPs) and assesses their adverse impact on the early life stages of zebrafish. Experimental findings revealed that a single disposable mask could release approximately 1.79 × 109 particles, with nearly 70% measuring less than 1 μm, following 60 days of sunlight exposure and subsequent sand-induced physical abrasion. Remarkably, the MPs/NPs (MNPs) emanating from face masks have the potential to permeate the outer layer (chorion) of zebrafish embryos. Furthermore, due to their minute size, these particles can be consumed by the larvae's digestive system and subsequently circulated to other tissues, including the brain. Exposure to mask-derived MNPs at concentrations of 1 and 10 μg/L led to significant cases of developmental toxicity, incited oxidative stress, and prompted cell apoptosis. A subsequent metabolomics analysis indicated that the accumulation of these plastic particles perturbed metabolic functions in zebrafish larvae, primarily disrupting amino acid and lipid metabolism. The outcomes of this research underscore the accelerating possibility of environmental aging processes and physical abrasion in the release of MNPs from disposable face masks. Most importantly, these results shed light on the possible ecotoxicological risk posed by improperly disposed of face masks.

Stormwater outlets: A source of microplastics in coastal zones of Cape Town, South Africa

The runoff from stormwater outlets are potential sources of microplastics (MPs) in coastal zones. The characteristics and concentrations of MPs in coastal water, sediment and biota (mussels, whelks and sea urchins) were measured in summer (2020/2021) (dry season) and winter (2021) (wet season) from three sites (Camps Bay, Mouille Point and Three Anchor Bay) in Cape Town. MPs were characterised visually using a stereo microscope and chemically using spectroscopy. MP concentrations were higher in water and sediment during winter, and higher in biota in summer. Compared to control sites, MPs were higher at all impact sites sampled. MPs extracted were mainly black polyester (PEST) fibres, 1000 to 2000 μm in length averaging 0.15 MPs/L in water, 52.11 MPs/kg dry weight in sediment and 1.35 MPs/g soft tissue wet weight in biota. The results indicate that coastal stormwater systems are potential sources of MPs in the coastal environment of Cape Town.

Microplastics in groundwater: An overview of source, distribution, mobility constraints and potential health impacts during the anthropocene

Microplastics (MPs) have already been detected in various environmental matrices like soil, sediment, and surface water, and recently in groundwater also. The occurrence of MPs in groundwater depends up on the transportation through recharge and may controlled by source and local hydrogeology, and partly on the process of surface water-groundwater interaction (SW-GW). Based on the available studies, we intended to establish a hypothetical overview on the source and process-dependent occurrence of MPs in groundwater across terrestrial and coastal aquifers. Groundwater recharge from agricultural stagnant water, losing streams near dumping sites and agricultural fields, effluents from wastewater treatment plants, septic system failure etc. are the potential sources of MPs in groundwater. The factors like sea level rise and tidal pumping are among the major factors which may control the migration of MPs in coastal aquifer along with the physical and chemical properties of the aquifer media. These MPs have another ecological concern as they can adsorb persistent organic pollutants as well as heavy metals and transfer them to animal tissues through food chain. Studies are being conducted mainly focusing the MP contamination in surface water, marine environment and soil, and very limited studies are available to address the source of MPs in groundwater. However, no such study has been done on the existence, profusion, or environmental factors that contribute to MP pollution in the groundwater in relation to the present climate change scenario. Understanding the extent of MP contamination in groundwater systems is necessary for developing effective management strategies and minimizing their impact on the environment and human health. This study focusses on the source along with the controlling factors of the migration of MPs towards groundwater including the effect of climate change.

Microplastics in environment: a comprehension on sources, analytical detection, health concerns, and remediation.

Contamination of ecosystems by microplastics (MPs) has been reported intensively worldwide in the recent decade. A trend of reports indicated their presence in the atmosphere; food items and soil ecosystems are rising continuously. Literature evidenced that MPs are abundant in seawater, beach sand, drinking water, agricultural soils, wastewater treatment plant (WWTP) effluent, and the atmosphere. The greater abundance of MPs in the environment has led to their invasion of seafood, human-consumed food items such as table salts, beverages, takeout food containers, and disposable cups, marine biological lives, and creating serious health hazards in humans. Moreover, the absence of guidelines and specifications for controlling MPs in the environment makes the situation alarming, and the human toxicity data of MPs is scarce. Thereby, the toxicity assessment of MPs in humans is of greater concern. This review compiles the updated information on the potential sources of MPs in different components of the environment (viz.soil, water, and air), their analysis methods, effects on human health, and remediation methods.

Plastic rain—Atmospheric microplastics deposition in urban and peri-urban areas of Patna City, Bihar, India: Distribution, characteristics, transport, and source analysis

Evidence of atmospheric microplastics (MPs) deposition in India is scarce though reports of MPs pollution in other environmental media exist. Henceforth, this study for the first time examines and compares the abundance, characteristics, transport, and source analysis of atmospheric MPs in the urban and peri-urban areas of Patna city, Bihar, India. Wet atmospheric fallout samples were collected and analyzed for MPs deposition rate. The results showed that the mean MPs concentrations at each site were 1959.6 ± 205 (urban) and 1320.4 ± 126 (peri-urban) MPs/m2/day. The deposited MPs were mainly transparent fibers and fragments with a mean size of 347.9 ± 189.2 µm. Polyethylene terephthalate and polypropylene were the most abundant polymer found at both sites. Morphological characteristics revealed surface degradation and deposition of metal contaminants on the identified MPs. Meteorological parameters (wind direction and rainfall intensity) were significantly associated with the distribution of atmospheric MPs in the study area. The cluster mean backward trajectory suggested vehicular emissions, construction activities, and waste mismanagement as the potential sources of MPs. Findings of the present work necessitates future studies in gaining a deeper understanding of the fate, movement, and potential health hazards associated with atmospheric MPs.

Identification of microplastic fibres released from COVID-19 test swabs with Raman imaging

BackgroundCOVID-19 pandemic is not yet over, and it has been generating lots of plastic wastes that become a big concern. To catch the virus, for example, no matter via antigen or PCR test, swab is generally used for sampling. Unfortunately, the swab tip is commonly made of plastics, and thus it can be a potential source of microplastics. This study aims to propose and optimise several Raman imaging to identify the microplastic fibres released from different COVID-19 test swabs.ResultsThe results show that Raman imaging can effectively identify and visualise the microplastic fibres released from the swabs. In the meantime, on the surface of the fibres, additives such as titanium oxide particles are also captured for some brands of swabs. To increase the result certainty, scanning electron microscope (SEM) is first employed to get the morphology of the released microplastic fibres, along with Energy-dispersive X-ray spectroscopy (EDS) to confirm the presence of titanium element. Then, Raman imaging is advanced to identify and visualise the microplastics and titanium oxide particles, from different characteristic peaks in the scanning spectrum matrix. To further increase the imaging certainty, these images can be merged and cross-checked using algorithms, or the raw data from the scanning spectrum matrix can be analysed and decoded via chemometrics, such as principal component analysis (PCA). Beyond the advantages, the disadvantages of the confocal Raman imaging (affected by focal height) and algorithms (non-supervised calculation) are also discussed and intentionally corrected. In brief, the imaging analysis (particularly the combined SEM with Raman) is recommended to avoid the possible result bias that might be generated from the single spectrum analysis at a selective but random position.ConclusionsOverall, the results indicate that Raman imaging can be a useful tool to detect microplastics. The results also send us a strong warning that, if we worry about the potential microplastics contamination, we should be cautious to select the suitable COVID-19 testing kits.

Cryosphere as a temporal sink and source of microplastics in the Arctic region

Microplastics (MPs) pollution has become a serious environmental issue of growing global concern due to the increasing plastic production and usage. Under climate warming, the cryosphere, defined as the part of Earth’s layer characterized by the low temperatures and the presence of frozen water, has been experiencing significant changes. The Arctic cryosphere (e.g., sea ice, snow cover, Greenland ice sheet, permafrost) can store and release pollutants into environments, making Arctic an important temporal sink and source of MPs. Here, we summarized the distributions of MPs in Arctic snow, sea ice, seawater, rivers, and sediments, to illustrate their potential sources, transport pathways, storage and release, and possible effects in this sentinel region. Items concentrations of MPs in snow and ice varied about 1–6 orders of magnitude in different regions, which were mostly attributed to the different sampling and measurement methods, and potential sources of MPs. MPs concentrations from Arctic seawater, river/lake water, and sediments also fluctuated largely, ranging from several items of per unit to >40,000 items m−3, 100 items m−3, and 10,000 items kg−1 dw, respectively. Arctic land snow cover can be a temporal storage of MPs, with MPs deposition flux of about (4.9–14.26) × 108 items km−2 yr−1. MPs transported by rivers to Arctic ocean was estimated to be approximately 8–48 ton/yr, with discharge flux of MPs at about (1.65–9.35) × 108 items/s. Average storage of MPs in sea ice was estimated to be about 6.1×1018 items, with annual release of about 5.1×1018 items. Atmospheric transport of MPs from long-distance terrestrial sources contributed significantly to MPs deposition in Arctic land snow cover, sea ice and oceanic surface waters. Arctic Great Rivers can flow MPs into the Arctic Ocean. Sea ice can temporally store, transport and then release MPs in the surrounded environment. Ocean currents from the Atlantic brought high concentrations of MPs into the Arctic. However, there existed large uncertainties of estimation on the storage and release of MPs in Arctic cryosphere owing to the hypothesis of average MPs concentrations. Meanwhile, representatives of MPs data across the large Arctic region should be mutually verified with in situ observations and modeling. Therefore, we suggested that systematic monitoring MPs in the Arctic cryosphere, potential threats on Arctic ecosystems, and the carbon cycle under increasing Arctic warming, are urgently needed to be studied in future.

Release of microplastics from disposable face mask in tropical climate

Outbreak of COVID 19 has caused an abrupt surge in the consumption of disposable face masks around the world. WHO has stated that wearing a face mask in public reduces the chances of being exposed to COVID 19 virus. With unchecked disposal of these used masks, a new kind of pollutant has emerged in the environment. Since these masks are generally made of polypropylene and polyurethane material, they can be considered as a potential source of microplastics (MPs) in the environment. In this study, we have evaluated the release of MPs particles from these face masks (namely from N95 and surgical masks) in deionized (DI) water and tap water over the span of 1 to 180 days. More specifically, a systematic study has been carried out to see the effect of temperature on release of MPs in water. MPs particles released in tap water (837 ± 113 particles/piece in 30 days) were significantly higher than that in DI water (564 ± 37 particles/piece in 30 days). When these masks were kept at a constant temperature of 45 °C for 30 Days, highest amount of MPs release (N95 899 ± 65 particles, Surgical 1038 ± 65 particles/piece) was observed as compared to other conditions. Most of the MPs particles released were polypropylene which were transparent and white in case of N95 while for surgical mask they were found to be of blue and white colour. With the aging of masks in water, quantity of MPs release was increased with simultaneous reduction in their size. Our study indicates that these disposable face masks are emerging to be a prominent source of MPs release in the environment and more hazardous for the tropical climate.