Production Potential Research Articles

Surface application of diatomaceous earth, SilicoSec® are effective on Sitophilus granarius and Rhyzopertha dominica, but less against Tribolium confusum

Diatomaceous earth (DE) has a promising potential in the control of stored-product pests. Most of the studies on the insecticidal potential of DE products are based on their persistent effects or the mortality they lead to via mixing with the grain. However, the knowledge on the performance of DEs on a particular surface is limited. In the current study, the insecticidal efficacy of a DE product, SilicoSec® was investigated against adults of Sitophilus granarius, Rhyzopertha dominica, and Tribolium confusum by surface application at 2.5, 5.0, 10.0, and 20.0 g/m2 on a concrete surface that is commonly used in storage structures. In S. granarius experiment, the highest immediate mortalities (89.2-99.2%) were obtained by the 5-day exposure even at the lowest rate (2.5 g/m2), while the highest delayed mortalities were 92.5% and 85% at rates of 2.5 and 20 g/m2, respectively by the 3-day exposure. In R. dominica experiment, the highest immediate mortalities (92.5-98.3%) were obtained by the 3-day exposure even at the lowest rate, while the highest delayed mortalities were 90.1 and 98.3% at rates of 10 and 20 g/m2, respectively, by the 1-day exposure. In T. confusum experiment, the highest immediate mortalities (83.3-91.0%) were obtained by the 7-day exposure at 10 or 20 g/m2, while the highest delayed mortalities were obtained by the 7-day exposure, and were 90.0 and 95.9% at rates of 10 and 20 g/m2, respectively. In conclusion, the insecticidal effect of surface application of SilicoSec® was high, moderate, and low against S. granarius, R. dominica, and T. confusum, respectively at concrete surfaces. A rate of 2.5 g/m2 of SilicoSec® provided an efficient control for S. granarius and R. dominica by 3- and 5-day exposures, respectively, while comparable mortality was obtained at a higher rate (10 or 20 g/m2) and exposure time (7-day) for T. confusum.

Alternative Use of Black and Navy Beans as Green Shell Beans

Although there is increasing consumer interest in newer foods such as green seeds, green shell bean production in Virginia is nonexistent. We conducted replicated field studies during 2022–23 to characterize production potential of green shell beans and green seeds from black and navy beans. Average green pod and green seed yields were 10,121 and 5186 kg·ha−1, respectively, whereas average seed number per pod was 3.6. As a group, black beans had a higher shelling percent than navy beans, with an average shelling percent of 54%. Green seeds from black and navy bean contained 26% protein, 82 mg·kg−1 Fe, and 38 mg·kg−1 Zn in addition to appreciable concentrations of other nutrients. Our results indicated that black and navy beans have potential as alternative crops to supply green seeds.

Genotype by environment interaction and stability study in bread wheat (Triticum aestivum L.) genotypes in Guji Zone, Southern Ethiopia

Genotype by environment interaction and stability study in bread wheat (Triticum aestivum L.) genotypes in Guji Zone, Southern Ethiopia

Assessment of biogas production potentials of palm oil mill effluent and cow dung substrates in anaerobic digester

The biogas production potentials of palm oil mill effluent (POME) and cow manure (CM) substrates were evaluated using anaerobic digester. The first two digesters (D1 and D2) were charged with POME and CM for mono-digestion respectively. However, co-substrates digestion was done in digesters D3 (60/40 % POME-CM), D4 (70/30 % POME-CM), and D5 (80/20 % POME-CM) and all the digestion lasted for 21 days. The biogas yield of the digesters and performance of the digestions were measured by the analysis of moisture content, pH, total suspended solids (TSS), total solids (TS), volatile solid (VS), chemical oxygen demand (COD), biochemical oxygen demand (BOD) and total organic carbon (TOC) using standard analytical methods. The results showed that D4 (70/30 % POME-CM) has the highest biogas yield (1875±0.11 mL) while D2 (100 % CM) gave the lowest biogas yield (443±0.15 mL). The BOD of D3, D4 and D5 were not detected. The concentrations of COD, TS, TSS and TOC showed a significant (p<0.05) decrease in D1, D3, D4 and D5 compared to D2. While D2, D3, D4 and D5 showed a significant (p<0.05) decrease in moisture content compared to D1. However, D1, D3, D4 and D5 showed increasing level of alkalinity compared to acidic level of D2. Therefore, this study suggests that co-substrates anaerobic digestion of palm oil mill effluent and CM are suitable for biogas production.

A Novel GE-Mackinsey Market Approach: Investment Opportunity for the Biopolymer Packaging Materials

Sustainable development in agriculture seeks to implement a robust bioeconomy strategy by valorizing agricultural resources into value-added products. Compared to primary biomass use, using agriculture residues and wastes can achieve higher reductions in GHG emissions and lower feedstock costs. Bioeconomy has substantial potential for high-value products such as biopolymers, pharmaceuticals, and food and feed additives. Low-value applications like bioenergy, biofuels, and bulk chemicals have a weak potential for bioeconomy development. However, high value-added products, including biopolymers, require an equal focus as other products in the bioeconomy value pyramid that can lift the market to elevate sustainable bioeconomy development. A successful transition through radical innovations must be justifiable, with economic, environmental, and social benefits primarily promoted by stakeholders, businesses, or government organizations. One of the core options would be to know the market potential of the biopolymer products. Here, a methodology for decision-making to evaluate four existing biopolymer packaging materials (Cellulose, PHA, PLA, and starch) in the EU market has been developed using the GE-McKinsey Nine-Box Matrix, considering market attractiveness and product competitive advantage. Market innovations can be fostered by integrating the resource availability and technology advancement indicators to the methodology steps. The methodology considers sustainability advantages for the agriculture sector and promotes the strategic commercialization of biopolymer packaging materials. Product-specific indicators are used to evaluate the market attractiveness and product competitive advantage. The research findings show that PLA biopolymer packaging material has the highest potential for commercialization. The application of this methodology and its results provide a justifiable way of determining the investments in value-added products and allow investors to make the right decision-making choice for bioplastic packaging materials, ensuring their sustainability and profitability in the market.

Exploring the Potential of Renewable Energy to Enable Green Hydrogen Production for a Sustainable Future

Abstract – Amidst intensifying concerns about greenhouse gas emissions, the imperative to transition towards sustainable energy solutions is paramount. Renewable energy sources (RES) provide a promising avenue, especially in hydrogen production. In this context, the emergence of “green hydrogen” is pivotal. Green hydrogen is a concept produced using RES like solar and wind energy to power the hydrogen production process. Unlike conventional methods emitting carbon dioxide, green hydrogen is generated through water electrolysis using clean energy. India relies on coal for around 70% of its energy needs, leading to a 29% rise in carbon emissions from 2015 to 2022. Green hydrogen is a potential alternative solution to address the increasing energy demand and the depletion of fossil fuels. Using wind energy for water electrolysis emerges as a suitable method for green hydrogen production. Therefore, in the present study, assessed the potential of hydrogen production using the wind energy resources in five selected locations in India using ERA5 hourly wind data. The investigation further explored the characteristics of wind speeds at these locations using average wind speed, Weibull parameters and wind rose analysis. Using the SUZLON S95 wind turbine, power output and annual energy generation at each location were estimated. Further, estimated the annual hydrogen production and required storage capacity at each location. The results showed a power generation of 891 kW in location Una and 895 kW in Mandvi. Finally, the amount of carbon emissions mitigated due to the use of wind energy sources instead of conventional sources for H2 production is calculated.

Occurrence and Potential for Coalbed Methane Extraction in the Depocenter Area of the Upper Silesian Coal Basin (Poland) in the Context of Selected Geological Factors

Coalbed methane (CBM) is the only unconventional gas in Poland with estimated recoverable resources. The prospects for developing deep CBM have been explored in recent years by drilling deep exploration wells within the depocenter of the Upper Silesian Coal Basin. The purpose of this study is to analyze the occurrence and potential for CBM extraction in this area of the basin, which can be considered prospective due to the confirmed presence of significant amounts of gas and thick coal seams at depths > 1500 m. The study examined the vertical and horizontal variability of the gas content in the studied area, the coal rank in the seams, thermal conditions, and coal reservoir parameters. The gas content in the seams, reaching more than 18 m3/t coaldaf at a depth of 2840 m, and indicative estimated gas resources of 9 billion m3 were found. The high gas content is accompanied by positive thermal and coal rank anomalies. The permeability and methane saturation of the coal seams are low, and therefore, potential methane production may prove problematic. However, the development of CBM extraction technologies involving directional drilling with artificial fracturing may encourage gas production testing in the study area.

Genotype by environment interaction and performance stability of common bean (Phaseolus vulgaris L.) cultivars grown in Dawuro zone, Southwestern Ethiopia

Abstract The performance of most crop genotypes varies significantly depending on their genotype–environment interactions. Providing information on high-yielding and well-adapted common bean genotypes in a given environment is crucial for small-holder farmers to boost their productivity. A field trial was conducted at the Gendo and Wara locations over two consecutive seasons to understand genotype–environment interactions on grain yield and to identify and select common bean genotypes that were better adapted and had high yield potential for production. Ten genotypes were evaluated for their performance using a randomized complete block design with three replications. The AMMI and GGE models were used to identify superior genotypes regarding their mean grain yield performance. The AMMI analysis of variance results showed that grain yield was significantly (p ≤ 0.05) influenced by genotype–environment interactions. This shows that genotypes varied in grain yield mean performance across environments, indicating the possibility of selecting suitable genotypes with specific and broad adaptability. The sum of squares factor indicated that grain yield variation was contributed by the genotype (61.0%), followed by the environment (29.80%) and the genotype–environment interaction effect (9.20%) of the total variation. The AMMI and GGE biplot analysis results showed that SER-119 and SER-125 were identified as the best genotypes regarding their mean grain yield performance. Additionally, the genotype selection index analysis result indicated that SER-119 and SER-125 were stable and consistently exhibited high mean performance in all evaluated settings. Therefore, SER-119 and SER-125 are prime candidates for production in various agroecologies suitable for common bean cultivation in Dawuro zones. The use of tools like GGE biplots and AMMI analysis helped visualize the genotype–environment interactions, aiding in the selection of appropriate genotypes for both specific and wide adaptability.

Assessing the Influence of Planting Dates on Sustainable Maize Production under Drought Stress Conditions

Water is one of the most precious resources and is essential to agricultural output; the biggest user of water is the agricultural sector. Several societal sectors are impacted by the problem of climate change, including agriculture, water resources, and irrigation water demand. A key element in determining sustainable crop production potential is choosing the right cultivars at the right time of year to plant. The dates on which maize is sown are greatly impacted by high summer temperatures and low spring temperatures. Water stress and the timing of sowing can have a significant impact on maize crop yield and water use efficiency. As a result, figuring out the ideal irrigation volume and sowing dates depending on local conditions is essential. A split plot layout was used to create a randomized complete block design for an experiment with five sowing dates (A, B, C, D, and E) and six hybrids (KWS3376, Xinyu 65, KWS9384, Huamei No. 1, Xinyu 102, and Heyu 187). All sowing dates and hybrids had a significant impact on the yield and yield-contributing features (leaf length, ear diameter, grain number per spike, grain breadth, hundred-grain weight, etc.) of maize crops according to the data analysis. A higher grain yield with yield features, such as ear length, number of grains per ear, and hundred-grain weight, was obtained with early-season sowing. Delayed seeding resulted in a lower crop yield. The seasonally delayed seeding of maize reduces yield and yield characteristics. Xinyu 65 produced the highest yield and yield component values of any hybrid. For improved yield and yield traits in the examined area, the study recommended planting maize hybrid Xinyu 65 early in the growing season.

Utilization of Magnesium Chloride (Mg-Cl) cycle for Hydrogen Production of SOMBRERO Fusion Reactor

The aim of this study is to investigate the hydrogen production potential of the Mg-Cl (magnesium chloride) cycle in the SOMBRERO fusion reactor. Three different percentages of UO2 nuclear fuel, namely 2%, 6% and 10%, have been used while keeping the fuel zone thickness constant. The performance of the SOMBRERO fusion reactor has been considered statically. The neutronic calculations have performed with Monte Carlo neutron transport code. Firstly, it has been determined that the tritium breeding ratio (TBR) and energy multiplication factor (M) values depends on neutronically. Secondly, the amount of hydrogen production with by using energy multiplication factor (M) have been performed. The highest hydrogen production has been obtained as 8,12687 kg/s for 10% UO2 fuel ratio.

Site index curves using the generalized algebraic difference approach – Gada in planted forests of Pinus taeda L. in the midwest of Santa Catarina, Brazil

One of the most widely used tools for assessing the productive potential of planted Pinus taeda L. forests is to generate site index curves. Site index is a measure of the productive potential of forests and is influenced by various factors such as soil, water, light, among others, representing the relationship between the dominant height of trees and age at a specific location. This relationship produces a curve and can be used for site classification, consequently estimating the productivity of the forest stand. The objective of this study was to evaluate the performance of dynamic equations, the Algebraic Difference Approach (ADA), and its generalization (GADA). The data were obtained from permanent plots of Continuous Forest Inventory (CFI), collected in forest stands, through a sequence of annual remeasurements from 5 to 17 years of age. Dominant height was estimated as a function of age using nonlinear equations, and subsequently, the ADA and GADA methods were applied using the Chapman-Richards basic equation. The results of the GADA method provided a substantial reduction in the root mean square error (RMSE), less than half when compared to the traditional guide curve method, and an increase from 0.95 to 0.99 in R2adj. Therefore, the GADA methodology proved to be suitable and efficient for site index classification, with noticeable flexibility and reliability on its estimates.

Performance of Blackgram as Influenced by Water Soluble Fertilizers and PGPR under Rainfed Situation

Lower production potential of blackgram grown under rainfed situation due to lack of proper nutrition during critical crop growth stages. So, investigation was carried out with an objective to study the effect of water-soluble fertilizers and PGPR on performance of blackgram during Kharif-2019, a field study was carried out at University of Agricultural and Horticultural Sciences, Shivamogga which comes under Southern Transition Zone of Karnataka. Experimental design was laid out in randomized complete block design with thirteen treatments and replicated thrice. Treatments include combination of 19:19:19, monopotassium phosphate @ different dosage foliar spray with and without PGPR treatment along with package of practices. Water soluble fertilizers viz., 19:19:19 (N: P: K) and mono potassium phosphate (0:52:34) were used in treatment combinations along with PGPR. The Results revealed that, foliar application of 19:19:19 and mono potassium phosphate @ 1 per cent each at 30 and 45 days after sowing + PGPR along with a package of practice recorded significantly higher plant height, number of branches per plant, leaf and stem dry weight, crude protein (26.54 %), seed yield (1167 kg ha-1) and haulm yield (2019 kg ha-1) over package of practice treatment and also positive correlation was found between growth and yield parameters with seed yield and haulm yield.

D-Arabitol production by a high arabitol-producing yeast, Zygosaccharomyces sp. Gz-5 isolated from miso.

d-Arabitol, an alternative sweetener to sugar, has low calorie content, high sweetness, low glycemic index, and insulin resistance-improving ability. In this study, d-arabitol-producing yeast strains were isolated from various commercial types of miso, and strain Gz-5 was selected among these strains. Phylogenetic tree analysis of the internal transcribed spacer sequence revealed that strain Gz-5 was distinct from Zygosaccharomyces rouxii, a major fermenting yeast of miso. The strain, identified as Zygosaccharomyces sp. Gz-5, grew better than other Z. rouxii in 15 g/L NaCl and produced 114 g/L d-arabitol from 295 g/L glucose in a batch culture for 8 days (0.386 g/g-consumed glucose). In a fed-batch culture, the yeast produced 133 g/L d-arabitol for 14 days, and the total d-arabitol amount increased by 1.75-fold. These results indicated that Zygosaccharomyces sp. Gz-5, a non-genetically modified strain, has excellent potential for the industrial production of d-arabitol.

Stability, Characterization, and Antibacterial Activity of Cinnamon (Cinnamomum burmanii) Extract Mask Preparations as Potential Skin Care Products

Stability, Characterization, and Antibacterial Activity of Cinnamon (Cinnamomum burmanii) Extract Mask Preparations as Potential Skin Care Products

Natural-inspired hierarchic double-Janus solar evaporator for stable clean water production from high-salinity emulsions

Interfacial solar evaporation shows great potential in clean water production, emulsions separation, and high-salinity brine treatment. However, it remains challenging for the evaporators to maintain a high evaporation rate in the high-salinity emulsions due to the co-pollution of salt and oil. Herein, we first proposed a hierarchic double-Janus solar evaporator (HDJE) with a hydrophobic salt-rejecting top layer and oil-rejecting bottom layer. Compared to the traditional one, HDJE could treat industrial high-salinity oil-in-water emulsions stably for over 70 h, with a stable average evaporation rate of 1.73 kg m−2 h−1 and a high purification efficiency of up to 99.8 % for oil and ions. It was also verified that HDJE could be used for high-efficiency purification of oily concentrated seawater outdoor. An average water production rate of 3.59 kg m−2 d−1 and a TOC removal ratio of over 98 % was obtained. In conclusion, this study provides a novel way to effectively dispose of high-salinity oily wastewater.

The Emerging Role of Natural Products in Cancer Treatment.

The exploration of natural products as potential agents for cancer treatment has garnered significant attention in recent years. In this comprehensive review, we delve into the diverse array of natural compounds, including alkaloids, carbohydrates, flavonoids, lignans, polyketides, saponins, tannins, and terpenoids, highlighting their emerging roles in cancer therapy. These compounds, derived from various botanical sources, exhibit a wide range of mechanisms of action, targeting critical pathways involved in cancer progression such as cell proliferation, apoptosis, angiogenesis, and metastasis. Through a meticulous examination of preclinical and clinical studies, we provide insights into the therapeutic potential of these natural products across different cancer types. Furthermore, we discuss the advantages and challenges associated with their use in cancer treatment, emphasizing the need for further research to optimize their efficacy, pharmacokinetics, and delivery methods. Overall, this review underscores the importance of natural products in advancing cancer therapeutics and paves the way for future investigations into their clinical applications.

A comprehensive review on anaerobic digestion with focus on potential feedstocks, limitations associated and recent advances for biogas production.

With the escalating energy demand to accommodate the growing population and its needs along with the responsibility to mitigate climate change and its consequences, anaerobic digestion (AD) has become the potential approach to sustainably fulfil our demands and tackle environmental issues. Notably, a lot of attention has been drawn in recent years towards the production of biogas around the world in waste-to-energy perspective. Nevertheless, the progress of AD is hindered by several factors such as operating parameters, designing and the performance of AD reactors. Furthermore, the full potential of this approach is not fully realised yet due the dependence on people's acceptance and government policies. This article focuses on the different types of feedstocks and their biogas production potential. The feedstock selection is the basic and most important step for accessing the biogas yield. Furthermore, different stages of the AD process, design and the configuration of the biogas digester/reactors have been discussed to get better insight into process. The important aspect to talk about this process is its limitations associated which have been focused upon in detail. Biogas is considered to attain the sustainable development goals (SDG) proposed by United Nations. Therefore, the huge focus should be drawn towards its improvements to counter the limitation and makes it available to all the rural communities in developing countries and set-up the pilot scale AD plants in both developing and developed countries. In this regard, this article talks about the improvements and futures perspective related to the AD process and biogas enhancement.

Screening for alkaliphilic microalgae for carbon capture from ambient air and food production

SummaryThe production of alkaliphilic microalgae can contribute to address the challenging cost of using pure carbon dioxide in large reactors. At high pH values, carbon dioxide is rapidly scavenged and the supply rates of dissolved inorganic carbon from the atmosphere to alkaline media are high. The present study aimed to identify microalgal strains that can cope with high alkalinity and aeration rates. Eight strains were studied and the microalgae Chlorella vulgaris, Scenedesmus almeriensis and Nannochloropsis gaditana were the only ones that were able to grow under these conditions. Their biomass productivities using laboratory‐scale bubble columns with no pH control and high aeration flow were 0.20 ± 0.03, 0.24 ± 0.03 and 0.08 ± 0.01 g·L−1·day−1, respectively. The production of the two former was scaled up to pilot‐scale bubble columns. Overall, the amount of atmospheric carbon dioxide that was transformed into biomass was in the range of 10%–30%, depending on the strain used and the photobioreactor setup. The biomass was rich in proteins and β‐carotene, both valuable products, highlighting the potential production of food ingredients while capturing carbon dioxide from the atmosphere.

Exploring Nature's Pharmacy: A Comprehensive Review of Natural Products as Potential Sources of Therapeutic Agents

Natural products have been integral to discovering numerous drugs with diverse pharmacological activities. This review provides a comprehensive analysis of the chemical diversity of natural products, their role in drug discovery, and their potential applications in modern medicine. Through critically evaluating recent research findings and case studies, we highlight the significance of natural products as sources of new drugs and discuss emerging trends and challenges in the field. Furthermore, we delve into the intricate interplay between natural products and drug discovery processes, elucidating their indispensable role in shaping therapeutic landscapes. We unveil the transformative potential of natural products as catalysts for novel drug development through a meticulous analysis of recent advancements and case studies. Additionally, we navigate the evolving trends and challenges confronting the integration of natural products into modern pharmacotherapy, offering insights into strategies for overcoming barriers and maximizing their therapeutic impact. In essence, this review serves as a comprehensive roadmap for understanding the multifaceted role of natural products in drug discovery and their profound implications for advancing modern medicine. Through a synthesis of empirical evidence and critical analysis, we aim to inspire further exploration and innovation in harnessing the untapped potential of natural products for addressing unmet medical needs and improving patient outcomes.

A new concept in assessing adaptability index for superior potential cropping intensity in early-maturing rice

Implementing a cropping intensity program with rice cultivation four times a year (CI 400) can be achieved using early maturing varieties of rice. However, this development needs to pay attention to the adaptability of the varieties planted to ensure successful implementation. The adaptability approach is a combination of assessing stability and productivity potential. This concept has been developed and applied in several studies, including research on rice. However, this approach is considered less comprehensive because it is non-parametric and only focuses on one stability analysis. Therefore, a systematic integration of various stability analyses, including index methods, is needed to comprehensively assess adaptability, particularly for early-maturing rice in South Sulawesi. This region is characterized by a dynamic climate zone and is one of the top four highest rice producers in Indonesia. Meanwhile, this study aims to develop a comprehensive adaptability index and select the best early-maturing rice varieties, especially in South Sulawesi. The investigation was conducted in Bone, Soppeng, and Gowa over two seasons using a nested randomized complete block design, with organized replications in each environment (location-season). Additionally, there was a significant focus on the application of five early-maturing and two check rice varieties, with each factor repeated three times at each location, totaling 126 experimental units. The results showed that the adaptability index, by combining stability rank accumulation with yield min max standardization, was effective at assessing the yield potential and stability of early-maturing rice varieties in supporting CI 400. Inpari 13 had the best index value at 0.55, followed by Cakrabuana at 0.31; hence both were recommended as adaptive early-maturing rice varieties, especially in South Sulawesi.