Potency Assay Research Articles

Synthesis and Structure-Activity Relationship of Covalent Inhibitors of SARS-CoV-2 Papain-Like Protease with Antiviral Potency

The papain-like protease (PLpro) is a highly conserved domain encoded by the coronavirus (CoV) genome and it plays an essential role in the replication and maturation of the virus in addition to weakening host immune response. Due to the virus’s reliance on PLpro for survival and propagation, small-molecule inhibitors of PLpro serve as an attractive model for direct-acting antiviral therapeutic agents against SARS-CoV-2. Building upon existing work aimed at designing covalent inhibitors against PLpro, we report the synthesis and structure–activity relationship of analogs based on the known covalent inhibitor 1 (Sanders, et al.2023). To evaluate the efficacy of synthesized derivatives, we conducted enzymatic inhibition assays, SARS-CoV-2/HeLa-ACE2 cellular potency and toxicity assays, and profiled the most promising analogs via in vitro ADME and in vivo pharmacokinetic studies. Additionally, we describe computational docking of profiled compounds bound to PLpro to elucidate the structure–activity relationship of compounds based on 1 and offer suggestions for optimizing the potency and selectivity of the electrophilic warhead and improving ADME and PK properties for this chemotype. Relative to the parent compound, new designs demonstrate comparable potency and target selectivity for PLpro. The accomplished SAR campaign provides novel insight for future development of antivirals against SARS-CoV-2.

A collaborative study to establish the second national standard for antithrombin concentrate in Korea

This study aimed to establish a second national standard for antithrombin (AT) concentrate that can be used for potency assays of AT products. A collaborative study was conducted involving four laboratories, including national control laboratories and manufacturers in Korea, and the suitability of a candidate material to serve as the second national standard for AT concentrate was evaluated. The candidate material was manufactured using a process approved for Good Manufacturing Practices. The potency of the candidate was determined using the heparin cofactor chromogenic method. The candidate was calibrated against the third International Standard for AT concentrate (code 06/166). Participants provided data from 58 independent assays. Combined potency estimates were calculated by determining the geometric means of the results obtained from all assays performed at individual laboratories. The overall potency assessments were subsequently established as the geometric means of all results collected from all laboratories. According to the collaborative study results, the intra- and inter-laboratory variability showed acceptable geometric coefficient of variation of 1.2 %–3.4 % and 2.4 % respectively, and it deemed to serve as the Korean national standard for AT concentrate with the assigned potency as follows: 32.1 IU/vial (95 % confidence interval; 31.7–32.5 IU/vial).

Immunogenicity Assessment of a 14-Valent Human Papillomavirus Vaccine Candidate in Mice.

Cervical cancer ranks as the fourth most common cancer affecting women globally, with HPV as the primary etiology agent. Prophylactic HPV vaccines have substantially reduced the incidence of cervical cancer. This study assessed the immunogenicity of SCT1000, a 14-valent recombinant virus-like particle (VLP) vaccine developed by Sinocelltech, Ltd. using pseudovirion-based neutralization assays (PBNAs) and total IgG Luminex immunoassays (LIAs). Currently in phase III clinical trials in China, SCT1000 targets the same HPV types as Gardasil 9®, plus five additional high-risk types, thereby covering twelve high-risk HPV types implicated in 96.4% of cervical cancer cases. In murine models, a dose of 1.85 μg per mouse was identified as optimal for evaluating SCT1000's immunogenicity in a three-dose regimen, as measured by PBNA and total IgG LIA across all 14 HPV types. SCT1000 induced high levels of protective antibodies, which were sustained for at least four months following the third dose. The vaccine also demonstrated stable and consistent immunogenicity in mouse potency assays under both long-term and accelerated conditions. Additionally, our studies revealed a strong correlation between the two serological tests used. SCT1000 elicited robust, durable, and consistent humoral immune responses across all 14 HPV types, indicating its potential as a broad-spectrum vaccine candidate against HPV types 6/11/16/18/31/33/35/39/45/51/52/56/58/59. The significant correlations observed between PBNA and total IgG LIA support the use of the Luminex-based total IgG method as a reliable and effective alternative for immunogenicity assessment in preclinical and future clinical vaccine development.

Development and validation of a VP7-specific EIA for determining the potency and stability of inactivated rotavirus vaccine

To determine the potency of the inactivated rotavirus vaccine (IRV), we developed an enzyme immunoassay (EIA) using a biotin-conjugated RV VP7-specific monoclonal antibody. RV VP7, a pivotal structural protein in the outer capsid layer, governs RV G genotypes and prompts host immune responses, including neutralizing antibodies. This EIA showed high specificity, good linearity, high precision, and high accuracy, with a low limit of detection (LOD) and a limit of quantitation (LOQ) of 0.037µg/ml RV antigen. The EIA was evaluated and proved suitable for establishing the long-term stability of IRV drug substance (DS) and aluminum-formulated drug product (DP) when stored at -70±10°C and 5±3 °C, respectively. Our results support the use of this EIA to examine the stability and determine the potency, antigen dose, lot-to-lot consistency, and lot release of IRV products. This RV potency assay may serve as an alternative to in vivo potency tests, making it suitable for quality control tests of cGMP IRV lots in clinical trials.

A Rapid Virus-Free Method for Producing Influenza HA Immunogen Needed for Preparation of Influenza Vaccine Potency Antisera Reagents.

The potency of inactivated and recombinant influenza vaccines is measured using the single-radial immunodiffusion (SRID) assay. The strain-specific antigen and antibody potency reagents required for the assay are prepared and distributed by regulatory agencies to ensure vaccine standardization, but timely reagent production is always challenging. This poses unique concerns for rapid pandemic responses. Alternative methods have been described for generating strain-specific potency antibody reagents without the need for live influenza virus, but such methods are infrequently used, suggesting the need for additional antigen expression approaches. We describe a rapid process using a mammalian expression system to produce recombinant influenza hemagglutinin (rHA). This platform was used to generate rHA from two H5 clade 2.3.4.4 influenza viruses, in both soluble ectodomain or full-length HA forms, and a soluble ectodomain rHA from an influenza H2 virus. The purified rHAs were used as immunogens to produce HA antibody reagents that were tested for suitability in the SRID assay to accurately measure the potency of inactivated pandemic influenza vaccines. Antibody reagents generated to either ectodomain or full-length rHA worked well in the SRID assay and resulted in vaccine potency values equivalent to those generated with standard reference antibodies. The results demonstrate that rHA produced from a simple mammalian cell transfection method can be used to generate HA antibody suitable for use in the influenza vaccine SRID potency assay and suggest a practical means by which an extensive library of pandemic reagents can easily be prepared in advance of and during an influenza emergency.

Design and validation of cell-based potency assays for frataxin supplementation treatments

Friedreich's ataxia (FRDA) is a multisystem, autosomal recessive disorder caused by mutations in the frataxin (FXN) gene. As FRDA is considered a FXN deficiency disorder, numerous therapeutic approaches in development or clinical trials aim to supplement FXN or restore endogenous FXN expression. These include gene therapy, protein supplementation, genome editing or upregulation of FXN transcription. To evaluate efficacy of these therapies, potency assays capable of quantitative determination of FXN biological activity are needed. Herein, we evaluate the suitability of mouse embryonic fibroblasts derived from Fxn G127V knock-in mice (MUT MEFs) as a candidate for cell-based potency assays. We demonstrate that these cells, when immortalized, continue to express minute amounts of Fxn and exhibit a broad range of phenotypes that result from severe Fxn deficiency. Exogenous FXN supplementation reverses these phenotypes. Thus, immortalized MUT MEFs are an excellent tool for developing potency assays to validate novel FRDA therapies. Care needs to be exercised while utilizing these cell lines, as extended passaging results in molecular changes that spontaneously reverse FRDA-like phenotypes without increasing Fxn expression. Based on transcriptome analyses, we identified the Warburg effect as the mechanism allowing cells expressing a minimal level of Fxn to thrive under standard cell culture conditions.

Scalable Biomanufacturing Workflow to Produce and Isolate Natural Killer Cell-derived Extracellular Vesicle-based Cancer Biotherapeutics.

Natural killer cell-derived extracellular vesicles (NK-EVs) are being investigated as cancer biotherapeutics. They possess unique properties as cytotoxic nanovesicles targeting cancer cells and as immunomodulatory communicators. A scalable biomanufacturing workflow enables the production of large quantities of high-purity NK-EVs to meet the pre-clinical and clinical demands. The workflow employs a closed-loop hollow-fiber bioreactor, enabling continuous production of NK-EVs from the NK92-MI cell line under serum-free, xeno-free, feeder-free, and antibiotic-free conditions in compliance with Good Manufacturing Practices standards. This protocol-driven study outlines the biomanufacturing workflow for isolating NK-EVs using size-exclusion chromatography, ultrafiltration, and filter-based sterilization. Essential NK-EV product characterization is performed via nanoparticle tracking analysis, and their functionality is assessed through a validated cell viability-based potency assay against cancer cells. This scalable biomanufacturing process holds significant potential to advance the clinical translation of NK-EV-based cancer biotherapeutics by adhering to best practices and ensuring reproducibility.

Development of a Cell-Based Reporter Potency Assay for Live Virus Vaccines.

The rapid development of potency assays is critical in the development of life-saving vaccines. The traditional plaque assay or fifty percent tissue culture infectious dose (TCID50) assay used to measure the potency of live virus vaccines is time consuming, labor intensive, low throughput and with high variability. Described here is the development and qualification of a cell-based reporter potency assay for two vaccines for respiratory viral infection, one based on the recombinant vesicular stomatitis virus (rVSV) backbone, termed Vaccine 1 in this paper, and the other based on the measles virus vector, termed Vaccine 2. The reporter potency assay used a Vero E6 cell line engineered to constitutively express NanuLuc® luciferase, termed the VeroE6-NLuc or JM-1 cell line. Infection of JM-1 cells by a live virus, such as rVSV or measles virus, causes a cytopathic effect (CPE) and release of NanuLuc® from the cytoplasm into the supernatant, the amount of which reflects the intensity of the viral infection. The relative potency was calculated by comparison to a reference standard using parallel line analysis (PLA) in a log-log linear model. The reporter assay demonstrated good linearity, accuracy, and precision, and is therefore suitable for a vaccine potency assay. Further evaluation of the Vaccine 1 reporter assay demonstrated the robustness to a range of deliberate variation of the selected assay parameters and correlation with the plaque assay. In conclusion, we have demonstrated that the reporter assay using the JM-1 cell line could be used as a potency assay to support the manufacturing and release of multiple live virus vaccines.

In vitro CAR-T cell killing: validation of the potency assay

For advanced therapy medicinal products, the development and validation of potency assays are required, in accordance with international guidelines, to characterise the product and obtain reliable and consistent data. Our purpose was to validate the killing assay for the evaluation of autologous anti-CD19 chimeric antigen receptor (CAR) T potency. We used CD4 + and CD8 + lymphocytes or anti-CD19 CAR-T cells as effector cells and REH (CD19 +) or MOLM-13 (CD19 −) cell lines as target cells. After co-culturing target and effector cells (1:1 ratio) for 24 h, samples were labelled with 7-AAD, anti-CD3 and anti-CD19 antibodies and the frequency of CD19 + dead cells was evaluated by flow cytometry. In order to verify the CAR-T specificity for the CD19 + target, the co-culture between CAR-T and REH or MOLM-13 at different effector-to-target ratios was scheduled. Moreover, not transduced CD4 + and CD8 + lymphocytes were tested in comparison with CAR-T from the same donor to demonstrate the assay specificity. Linearity and accuracy were evaluated, and established acceptance criteria were compiled for both parameters (r2 ≥ 0.97 for linearity and average relative error ≤ 10% for accuracy). Furthermore, the method was considered robust when performed between 23 and 25 h of co-culture, and the intra-assay, inter-assay and inter-day precision was obtained. Finally, in order to verify the inter-analyst precision, the test was executed by three different operators and the intra-class correlation coefficient was > 0.4 in both cases. In conclusion, we consider this CAR-T potency assay as validated and usable in all steps of product development and quality control.

Evaluation of resazurin phenoxazine dye as a highly sensitive cell viability potency assay for natural killer cell-derived extracellular vesicle-based cancer biotherapeutics.

Natural killer cell-derived extracellular vesicles (NK-EVs) are candidate biotherapeutics against various cancers. However, standardised potency assays are necessary for a reliable assessment of NK-EVs' cytotoxicity. This study aims to thoroughly evaluate a highly sensitive resazurin phenoxazine-based cell viability potency assay (measurement of the cellular redox metabolism) for quantifying the cytotoxicity of NK-EVs against leukaemia K562 cells (suspension model) and breast cancer MDA-MB-231 cells (adherent model) in vitro. The assay was evaluated based on common analytical parameters setforth by regulatory guidelines, including specificity, selectivity,accuracy, precision, linearity, range and stability. Our results revealed that this resazurin-based cell viability potency assay reliably and reproducibly measured a dose-response of NK-EVs' cytotoxic activity against both cancer models. The assay showed precision with 5% and 20% variation for intra-run and inter-run variability. The assay signal showed specificity and selectivity of NK-EVs against cancer target cells, as evidenced by the diminished viability of cancer cells following a 5-hour treatment with NK-EVs, without any detectable interference or background. The linearity analysis of target cancer cells revealed strong linearity for densities of 5000 K562 and 1000 MDA-MB-231 cells per test with a consistent range. Importantly, NK-EVs' dose-response for cytotoxicity showed a strong correlation (|ρ| ∼ 0.8) with the levels of known cytotoxic factors associated with the NK-EVs' corona (FasL, GNLY, GzmB, PFN and IFN-γ), thereby validating the accuracy of the assay. The assay also distinguished cytotoxicity changes in degraded NK-EVs, indicating the ability of the assay to detect the potential loss of sample integrity. Compared to other commonly reported bioassays (i.e., flow cytometry, cell counting, lactate dehydrogenase release assay, DNA-binding reporter assay and confluence assay), our results support this highly sensitive resazurin-based viability potency assay as a high-throughput and quantitative method for assessing NK-EVs' cytotoxicity against both suspension and adherent cancer models for evaluating NK-EVs' biotherapeutics.

EBV T-cell immunotherapy generated by peptide selection has enhanced effector functionality compared to LCL stimulation.

Adoptive immunotherapy with Epstein-Barr virus (EBV)-specific T cells is an effective treatment for relapsed or refractory EBV-induced post-transplant lymphoproliferative disorders (PTLD) with overall survival rates of up to 69%. EBV-specific T cells have been conventionally made by repeated stimulation with EBV-transformed lymphoblastoid cell lines (LCL), which act as antigen-presenting cells. However, this process is expensive, takes many months, and has practical risks associated with live virus. We have developed a peptide-based, virus-free, serum-free closed system to manufacture a bank of virus-specific T cells (VST) for clinical use. We compared these with standard LCL-derived VST using comprehensive characterization and potency assays to determine differences that might influence clinical benefits. Multi-parameter flow cytometry revealed that peptide-derived VST had an expanded central memory population and less exhaustion marker expression than LCL-derived VST. A quantitative HLA-matched allogeneic cytotoxicity assay demonstrated similar specific killing of EBV-infected targets, though peptide-derived EBV T cells had a significantly higher expression of antiviral cytokines and degranulation markers after antigen recall. High-throughput T cell receptor-beta (TCRβ) sequencing demonstrated oligoclonal repertoires, with more matches to known EBV-binding complementary determining region 3 (CDR3) sequences in peptide-derived EBV T cells. Peptide-derived products showed broader and enhanced specificities to EBV nuclear antigens (EBNAs) in both CD8 and CD4 compartments, which may improve the targeting of highly expressed latency antigens in PTLD. Importantly, peptide-based isolation and expansion allows rapid manufacture and significantly increased product yield over conventional LCL-based approaches.

A Validation of the Equivalence of the Cell-Based Potency Assay Method with a Mouse LD50 Bioassay for the Potency Testing of OnabotulinumtoxinA.

(1) Background: At present, the only potency assay approved in China for the in-country testing of botulinum toxin type A for injection products is the mouse bioassay (MBA). The Chinese market for neurotoxin products is rapidly expanding, but MBAs are subject to high variability due to individual variations in mice, as well as variations in injection sites, in addition to the limited number of batches tested for one MBA. Compared with the mLD50 method, the cell-based potency assay (CBPA) developed for the potency testing of onabotulinumtoxinA (BOTOX) by AbbVie not only does not use any experimental animals but also allows for significant time and cost savings. Due to the significant benefits conferred by the replacement of the mLD50 assay with CBPA in China, the CBPA method has been transferred, validated, and cross-validated to demonstrate the equivalence of the two potency methods. (2) Methods: The differentiated SiMa cells were treated with both BOTOX samples and the reference standard, and the cleaved SNAP25197 in the cell lysates was quantified using Chemi-ECL ELISA. A 4-PL model was used for the data fit and sample relative potency calculation. The method accuracy, linearity, repeatability, and intermediate precision were determined within the range of 50% to 200% of the labeled claim. A statistical equivalence of the two potency methods (CBPA and mLD50) was initially demonstrated by comparing the AbbVie CBPA data with NIFDC mLD50 data on a total of 167 commercial BOTOX lots (85 50U lots and 82 100U lots). In addition, six lots of onabotulinumtoxinA (three 50U and three 100U) were re-tested as cross-validation by these two methods for equivalence. (3) Results: The overall assay's accuracy and intermediate precision were determined as 104% and 9.2%, and the slope, R-square, and Y-intercept for linearity were determined as 1.071, 0.998, and 0.036, respectively. The repeatability was determined as 6.9%. The range with the acceptable criteria of accuracy, linearity, and precision was demonstrated as 50% to 200% of the labeled claim. The 95% equivalence statistic test using margins [80%, 125%] indicates that CBPA and mLD50 methods are equivalent for both BOTOX strengths (i.e., 50U and 100U). The relative potency data from cross-validation were within the range of ≥80% to ≤120%. (4) Conclusions: The CBPA meets all acceptance criteria and is equivalent to mLD50. The replacement of mLD50 with CBPA is well justified in terms of ensuring safety and efficacy, as well as for animal benefits.

Novel envelope protein time-resolved fluoroimmunoassay as an alternative in vitro potency assay for quality control of inactivated Japanese encephalitis virus vaccine

Japanese encephalitis (JE) vaccination is the most effective way to prevent JE. Plaque reduction neutralization test (PRNT) as the standard method for potency testing for inactivated JE vaccine could not provide the exact potency value. Envelope (E) protein of JE virus induces the body to create neutralizing antibodies. There is a potential for using the determination of E protein to assess the immunogenicity and efficacy of JE vaccine. In this study, an automatic time-resolved fluoroimmunoassay for detection of E protein in JE vaccine was established as a simple and rapid in vitro potency assay to complement PRNT, including the expression and paired screening of monoclonal antibodies, the establishment of assay method and performance verification. A pair of anti-E protein neutralizing antibodies (L022 and L034) were screened to construct the sandwich detection pattern. After pre-treating the vaccine sample, the entire analysis was performed using a fully automated machine, which had a little detection time and eliminated manual error. The results of the validation experiment met the requirements for quality control. The linear range was from 0.78125 U/mL to 25 U/mL, the sensitivity was 0.01 U/mL, the intra-assay coefficient of variation was less than 5 %, and the inter-assay coefficient of variation was less than 10 %. The recovery from the dilution was between 90 % and 110 %. This present TRFIA shown good stability and effectiveness in quality control for samples related to JE vaccine production. The outcomes demonstrated that the present TRFIA could be an alternative in vitro potency assay in quality control for inactivated JE vaccine.

Impact of cardiac health status on bone marrow cell secretome and myocardial repair

Abstract Funding Acknowledgements Type of funding sources: Public Institution(s). Main funding source(s): University of Fribourg Graduate assistant Background Restoring the damaged myocardium remains a significant clinical challenge. Administration of bioactive factors, exosomes, or cell secretomes has shown promising results in promoting angiogenesis, tissue repair, immunomodulation, and extracellular matrix remodelling, particularly for cardiovascular disease treatments. Bone marrow (BM) cells are an essential source of secretome-based therapies for myocardial infarction (MI). Harnessing the potential of the cellular secretome for therapeutic applications requires a comprehensive understanding of its composition, functions, and mechanisms of action. MI affects the entire hematopoietic hierarchy, from stem cells to myeloid progenitors in BM. The study investigates how the cardiac status healthy versus infarcted affects the BM cell compositions and the properties of their secretomes. Methods Bone marrow cells (BMC) were isolated from healthy male Lewis rats (hBMC) and infarcted one (iBMC) obtained 2 weeks post MI induced by coronary artery ligation and cultured for 2 weeks. Cells composition, particularly macrophages, was characterised using multiplex flow cytometry Cytek Aurora. (CD90, CD29, CD45. CD68, CD206, CD163, Arg1, CD80, CCR7, iNOS). Cell proliferation (Real-time cell analyser and EdU incorporation), metabolic assays (seahorse assays), PCR, MS proteomic, and potency assays for immunomodulatory properties were performed. Results Multiplex flow cytometry showed distinctions in the percentage of cells: CD34+ stem cells and hematopoietic CD45+ cells were significantly upregulated in hBMCs, while CD68+ cells were higher in iBMCs. Cell proliferation assay demonstrated that iBMCs had significantly lower proliferation rates compared to hBMCs. Cell Metabolism was also impacted, iBMCs showed increased basal respiration, ATP production, and maximal respiration compared to hBMCs. An increase in respiratory spare capacity in iBMCs suggests an increased potential for ATP production under increased energy demands. Relative to hBMC, iBMC significantly regulated the expression of genes involved in immune response, inflammation, angiogenesis, and ECM remodelling gm-csf, il-17, vcam1, stat6, mmp9, cam, arg1, mhcII, arg2 were downregulated and tlr2, cxcl10, il-6, timp1, rantes, mcp-1, vegf, il-1ra, il-1beta, mip-1alpha, tlr4, b2m, and mmp3 upregulated. Secreted proteins also varied. Finally, the secretome of iBMC showed an enhanced capacity to induce a phenotype switch of macrophages toward an anti-inflammatory profile. Conclusion Our study shows that MI significantly alters the properties of bone marrow cells, impacting their composition, proliferation, metabolism, gene expression and the immunomodulatory potential of the secretome. These findings highlight the importance of considering donor health status in developing restoring secretome-based therapies for cardiac repair and emphasise the need to incorporate potency assay of the biologics for a standardised therapy and quality control.

Fit for function: developing potency assays reflective of the in vivo environment

Fit for function: developing potency assays reflective of the in vivo environment

Vaccine process technology-Adecade of progress.

In the past decade, new approaches to the discovery and development of vaccines have transformed the field. Advances during the COVID-19 pandemic allowed the production of billions of vaccine doses per year using novel platforms such as messenger RNA and viral vectors. Improvements in the analytical toolbox, equipment, and bioprocess technology have made it possible to achieve both unprecedented speed in vaccine development and scale of vaccine manufacturing. Macromolecular structure-function characterization technologies, combined with improved modeling and data analysis, enable quantitative evaluation of vaccine formulations at single-particle resolution and guided design of vaccine drug substances and drug products. These advances play a major role in precise assessment of critical quality attributes of vaccines delivered by newer platforms. Innovations in label-free and immunoassay technologies aid in the characterization of antigenic sites and the development of robust in vitro potency assays. These methods, along with molecular techniques such as next-generation sequencing, will accelerate characterization and release of vaccines delivered by all platforms. Process analytical technologies for real-time monitoring and optimization of process steps enable the implementation of quality-by-design principles and faster release of vaccine products. In the next decade, the field of vaccine discovery and development will continue to advance, bringing together new technologies, methods, and platforms to improve human health.

Lead compound profiling for small molecule inhibitors of the REV1-CT/RIR Translesion synthesis Protein-Protein interaction

Translesion synthesis (TLS) is a cellular mechanism through which actively replicating cells recruit specialized, low-fidelity DNA polymerases to damaged DNA to allow for replication past these lesions. REV1 is one of these TLS DNA polymerases that functions primarily as a scaffolding protein to organize the TLS heteroprotein complex and ensure replication occurs in the presence of DNA lesions. The C-Terminal domain of REV1 (REV1-CT) forms many protein–protein interactions (PPIs) with other TLS polymerases, making it essential for TLS function and a promising drug target for anti-cancer drug development. We utilized several lead identification strategies to identify various small molecules capable of disrupting the PPI between REV1-CT and the REV1 Interacting Regions (RIR) present in several other TLS polymerases. These lead compounds were profiled in several in vitro potency and PK assays to identify two scaffolds (1 and 6) as the most promising for further development. Both 1 and 6 synergized with cisplatin in a REV1-dependent fashion and demonstrated promising in vivo PK and toxicity profiles.

Human platelet concentrates treated with microbicidal 405 nm light retain hemostasis activity

Chemical and UV light-based pathogen reduction technologies are currently in use for human platelet concentrates (PCs) to enhance safety from transfusion-transmitted infections. Relative to UV light, 405 nm violet-blue light in the visible spectrum is known to be less harmful. Hence, in this report for the first time, we have assessed the global hemostasis activity of PCs stored in plasma and the activities of six plasma coagulation factors (CFs) as a measure of in vitro hemostatic activity following exposure to the microbicidal 405 nm light. Apheresis PC samples collected from each screened human donor (n = 22) were used for testing of PCs and platelet poor plasma (PPP). Both PCs and PPPs were treated for 5 h with 405 nm light to achieve a previously established microbicidal light dose of 270 J/cm2. Activated partial thromboplastin time and prothrombin time-based potency assays using a coagulation analyzer and hemostatic capacity via Thromboelastography were analyzed. Thromboelastography analysis of the light-treated PCs and plasma present in the PCs showed little difference between the treated and untreated samples. Further, plasma present in the PCs during the light treatment demonstrated a better stability in potency assays for several coagulation factors compared to the plasma alone prepared from PCs first and subjected to the light treatment separately. Overall, PCs stored in plasma treated with 405 nm violet-blue light retain activity for hemostasis.

Brain-Permeable Immunoproteasome-Targeting Macrocyclic Peptide Epoxyketones for Alzheimer's Disease.

Previously, we demonstrated that linear peptide epoxyketones targeting the immunoproteasome (iP) could ameliorate cognitive deficits in mouse models of Alzheimer's disease (AD) independently of amyloid deposition. We also reported the first iP-targeting macrocyclic peptide epoxyketones, which exhibit improved metabolic stability compared with their linear counterparts. Here, we prepared additional macrocyclic peptide epoxyketones and compared them with existing macrocyclic iP inhibitors by assessing Caco2 cell-based permeability and microsomal stability, providing the four best macrocyclic iP inhibitors. We then evaluated the four compounds using the Ames test and the potency assays in BV2 cells, selecting compound 5 as our AD drug lead. When 5 was administered intravenously (40 mg/kg) or orally (150 mg/kg) into healthy BALB/c mice, we observed considerable iP inhibition in the mouse brain, indicating good blood-brain barrier permeability and target engagement. Combined results suggest that 5 is a promising AD drug lead that may need further investigation.

Automated ELISA for potency measurements of therapeutic antibodies and antibody fragments

Potency assays are essential for the development and quality control of biopharmaceutical drugs, but they are often a time limiting factor due to manual handling steps and consequently low analytical throughput. On the other hand, automation of potency assays can be challenging due to their complexity and the use of biological materials. ELISA (enzyme-linked immunosorbent assay) is widely used for potency determination and is a good candidate for automation as all ELISA types depend on the same basic steps: coating, blocking, sample incubation, detection, and signal measurement. Nevertheless, ELISA for relative potency measurements still require drug-specific development and assay validation thereby complicating automation efforts. To simplify potency testing by ELISA, we first developed a manual protocol generally applicable to different drugs and then adapted this protocol for automated measurements. We identified unexpected critical parameters which had to be adapted to transfer the manual ELISA to an automated liquid handling system and we demonstrated that gravimetric sample dilution is unnecessary with the automated protocol. Both manual and automated protocols were validated and compared using multiple biotherapeutics. The automated protocol showed similar or higher precision and accuracy when compared to the manual method.