Posterior Wall Acetabular Fractures Research Articles

Surgical treatment outcomes of acetabular posterior wall and posterior column fractures using 3D printing technology and individualized custom-made metal plates: a retrospective study

BackgroundFractures involving the posterior acetabulum with its rich vascular and neural supply present challenges in trauma orthopedics. This study evaluates the effectiveness of 3D printing technology with the use of custom-made metal plates in the treatment of posterior wall and column acetabular fractures.MethodsA retrospective analysis included 31 patients undergoing surgical fixation for posterior wall and column fractures of the acetabulum (16 in the 3D printing group, utilizing 3D printing for a 1:1 pelvic model and custom-made plates based on preoperative simulation; 15 in the traditional group, using conventional methods). Surgical and instrument operation times, intraoperative fluoroscopy frequency, intraoperative blood loss, fracture reduction quality, fracture healing time, preoperative and 12-month postoperative pain scores (Numeric Rating Scale, NRS), hip joint function at 6 and 12 months (Harris scores), and complications were compared.ResultsThe surgical and instrument operation times were significantly shorter in the 3D printing group (p < 0.001). The 3D printing group exhibited significantly lower intraoperative fluoroscopy frequency and blood loss (p = 0.001 and p < 0.001, respectively). No significant differences were observed between the two groups in terms of fracture reduction quality, fracture healing time, preoperative pain scores (NRS scores), and 6-month hip joint function (Harris scores) (p > 0.05). However, at 12 months, hip joint function and pain scores were significantly better in the 3D printing group (p < 0.05). Although the incidence of complications was lower in the 3D printing group (18.8% vs. 33.3%), the difference did not reach statistical significance (p = 0.433).ConclusionCombining 3D printing with individualized custom-made metal plates for acetabular posterior wall and column fractures reduces surgery and instrument time, minimizes intraoperative procedures and blood loss, enhancing long-term hip joint function recovery.Clinical Trial Registration12/04/2023;Trial Registration No. ChiCTR2300070438; http://www.chictr.org.cn.

Functional Outcomes and Their Influencing Factors for the Surgical Management of T-type Acetabulum Fractures: A Prospective Single-Centre Study of 73 Patients.

Introduction T-type fractures of the acetabulum are uncommon injuries, typically resulting in poorer long-term outcomes compared to other patterns of acetabular fractures. Our main purpose is to analyse the epidemiology, functional outcomes, and factors affecting the functional outcomes of patients with T-type acetabular fractures. Methods This prospective, single-centre study included 73 patients with T-type and T with posterior wall acetabular fractures. They underwent treatment with open reduction internal fixation using plating through the modified Stoppa, Kocher-Langenbeck (KL), or dual approach. The post-operative reduction was assessed according to Matta's criteria, and functional outcomes were evaluated using the modified Harris hip score. Results Between September 2017 and January 2023, 53 patients underwent surgery for T-type fractures (72.6%),and 20 patients were treated for T with posterior wall acetabular fractures (27.4%). The minimum follow-up period was one year, with a mean follow-up of 3.5 years. Anatomical reduction emerged as the major contributing factor towards good functional outcomes compared to satisfactory reduction according to Matta's criteria (P value: 0.006). Overall, 65 patients (89%) achieved excellent to good modified Harris hip scores, while eight patients (11%) obtained fair to poor scores. Patients with T-type fractures demonstrated better functional outcomes compared to T with posterior wall fractures (P value: 0.031). Conclusion Anatomical reduction, as assessed by Matta's reduction criteria, serves as a predictor of favourable functional outcomes. T with posterior wall fractures exhibit poor outcomes in comparison to T-type fractures. The surgical approach employed does not influence the reduction or the final functional outcome of the patient.

Using calcaneal plates in fixation of comminuted posterior wall acetabular fractures with cranial or posterior extension: a prospective case series and novel technique.

This study aims to evaluate the outcomes of using calcaneal plate in fixation of comminuted posterior wall (PW) acetabular fractures especially that have cranial (dome) or posterior extension (posterior column edge), and to evaluate its safety. To our knowledge, this is the first study that utilizes this off label implant technique in fixation of such fracture. Twenty-two patients enrolled in the study with a minimum follow up of one year. After reducing the PW fragments sequentially, calcaneal plate was applied, fixing its distal part at ischial tuberosity upper ends using 3 screws in a triangular fashion, while its proximal part and radial wings were firmly fixed along the acetabular rim together with the classic longitudinal anchorage. Any fixation failure or head subluxation was recorded. Radiological outcome showed 18 cases scored as excellent, 2 were good, and 2 were poor. The functional outcome revealed 2 patients were excellent, 6 were very good and 14 were good. There was no loss of reduction or fixation failures throughout the follow up period. Calcaneal plate may offer an alternative method of fixation of comminuted PW fractures with acceptable radiological and functional results. Our study result may encourage the comprehensibility and replicability of this practice, however randomized multicentered studies should be conducted to validate this assumption. This method provides valuable trick strategy, stable and soft-tissue-friendly fracture fixation where modern implantations may be unavailable or of high cost. Calcaneal plates show some fascinating features that allow using them outside their field being flexible with large footprint area for fracture buttressing beside numerous hole choices with diverse paths providing suitable fixation, articular stability and wide zone of coverage in PW comminuted fracture patterns with cranial or posterior extensions. The plate proximal triangular configuration together with distal triangular screw fixation gives a stiff rigid anchorage and buttressing similar to a metal mesh covering and fixing any fragment numbers up to dome level.

Novel implant design for comminuted posterior wall acetabular fractures.

In recent years, the medical community has witnessed a notable increase in high-energy traumatic injuries, leading to a surge in complex fracture patterns that challenge existing treatment methodologies. Among these, the posterior approach to acetabular fractures stands out for offering direct visualization of the retro-acetabular surface, with current fixation methods relying on 3.5mm low-profile reconstruction plates and various other implants. Despite the effectiveness of these methods, there is a burgeoning demand for a singular, adaptable implant that not only streamlines the surgical process but also optimizes patient outcomes. In an innovative approach to address this need, three-dimensional (3D) models of the posterior acetabular wall were meticulously crafted using AutoCAD® software. The chosen material for the implant was 316L surgical steel for its durability and strength. The design of the implant featured a low-profile mesh structure, which was instrumental in facilitating osteosynthesis. This design allowed for the placement of screws of varying lengths in multiple directions, ensuring the initial reconstruction of the joint in an anatomical position without hindering the placement of the definitive implant. The primary objective was to secure the fixation and stabilization of the fracture by specifically targeting the smaller bone fragments. A comparative analysis was then conducted between this novel plate and a conventional 316L surgical steel, seven-hole, 3.5mm reconstruction plate through finite element analysis. The comparative analysis unveiled that both plates demonstrated comparable deformation capacities, with no significant differences in load-bearing capabilities observed. This finding suggests that the innovative plate can match the performance of traditional plates used in such surgeries. The finite element analysis revealed that the newly developed anatomical plate for posterior wall acetabular fractures meets the necessary physical and mechanical criteria for permanent implementation in patients with these fractures. This breakthrough represents a promising advancement that could simplify surgical procedures and potentially elevate patient outcomes. This study is classified as a Level II, diagnostic study.

A New Computed Tomography-Based Measure that Provides Insight Into Hip Stability in Patients With Posterior Wall Acetabular Fractures.

To describe the technique and results of a new sagittal plane computed tomography (CT)-based angular measure for predicting stability after posterior wall acetabular fractures (PWF). Retrospective review. Academic Level II trauma center. Fifty-eight consecutive patients with PWF (AO/OTA class 62A.1), 98% were high-energy injuries. A new sagittal CT measure of PWF based on the angle subtending the joint center, cranial and caudal fracture exits. Hip incongruity or dislocation demonstrated using gold standard test, examination under anesthesia (EUA), or instability on static images. Prediction of hip instability using a sagittal CT angular measure based on cranial and caudal fracture exits was compared with previous axial CT measures suggestive of increased risk for instability including posterior wall size >50%, and those with cranial exit within 5.0 mm of the acetabular dome. There were 32 operative and 26 nonoperatively treated fractures. Thirty fractures were determined to be unstable, and 28 were stable after EUA. Measurements of >70 degrees using the sagittal CT angular measure predicted instability in 28 of 28 patients, and ≤70 degrees predicted stability in 30 of 30 patients (sensitivity 100% and specificity 100%). Prevalence of EUA confirmed instability for subgroups with PWF based on prior axial CT measures were as follows: ≥50% wall involvement (11/16; sensitivity 67% and specificity 60%; 95% CI, 45%-89%/45%-75%), fracture within 5.0 mm of dome (5/18; sensitivity 86% and specificity 73%; 95% CI, 71%-100%/59%-87%), fracture within 5.0 mm of dome and ≥50% involvement (1/9; sensitivity 89% and specificity 56%; 95% CI, 69%-100%/24%-88%). In a sample of 58 mostly high energy posterior wall fractures all having had an EUA, a new sagittal angular CT measurement of ≤70 degrees predicted hip stability and >70 degrees predicted instability with 100% sensitivity and specificity. Diagnostic Level III. See Instructions for Authors for a complete description of levels of evidence.

Dislocation Does Not Seem To Be an Absolute Factor Effecting the Short- to Medium-Term Poor Prognosis of Patients with Acetabular Posterior Wall Fracture.

Dislocation is a complication of acetabular fractures involving the posterior wall, but whether dislocation is an absolute factor impacting the short- to medium-term prognosis of the hip joint remains controversial. This study aimed to compare the short- to medium-term clinical and radiological results among patients diagnosed with an acetabular fracture involving the posterior wall, with or without dislocation.Seventy-nine patients diagnosed with an acetabular fracture involving the posterior wall were retrospectively divided into posterior dislocation and non-dislocation groups. All fractures were open reduction + internal fixation with a plate screw combination through the single Kocher-Langenbeck approach. The short- to medium-term radiographic outcomes of follow-up were evaluated using the Matta radiologic grading system, while the clinical outcomes were evaluated using the modified Merle d'Aubigné-Postel evaluation system.The mean follow-up duration for all patients was 43.90 (range 24-75) months. Both groups achieved similar short- to medium-term clinical and radiographic results. There seems to be no significant differences between the two groups regarding the short- to medium-term assessment of clinical and radiographic results and the occurrence of postoperative complications (p>0.05).In patients with acetabular fractures involving the posterior wall, hip dislocation is probably not an absolute determinant of a poor outcome. Even with early reduction, the short- to medium-term prognosis results appear similar to those of patients without dislocation.

Virtual preoperative planning and 3D-printed templates for pre-contoured plates in treatment of acetabular posterior wall fractures

To evaluate the feasibility and accuracy of virtual preoperative planning and 3D-printed templates for pre-contoured plates for the treatment of posterior wall fractures of the acetabulum. A retrospective analysis of 29 patients with posterior acetabular wall fractures treated between August 2017 and March 2021 were divided into 2 groups based on whether to use preoperative virtual planning and 3D printed template. In 3D-printing group, there were 14 patients, including 10 males and 4 females； aged from 21 to 53 years old；CT-based virtual surgical planning was done using Mimics and 3-Matic software and 3D-printed templates for pre-contoured plates were adopted. In conventional group, there were 15 patients, including 10 males and 5 females；aged from 19 to 55 years old；conventional method of intra-operative contouring to adapt the plate to the fracture region was adopted. Blood loss, surgical time, radiographic quality of reduction, and hip function were compared between groups. The difference in operation time and intraoperative blood loss was significant（P<0.05）. Twenty-three patients were followed up from 12 to 30 months, and the fractures in both groups healed with a healing time of 3 to 6 months. At the last follow-up, the Merle d'Aubign-Postel score of the 3D printed group was lower than that of the conventional group（P<0.05）, with no significant differences in walking ability, hip mobility and total score（P>0.05）. In 3D printing group, 6 cases were excellent, 5 cases were good, 3 cases were fair；in conventional group, 5 cases were excellent, 5 cases were good, 4 cases were fair, 1 case was worse；no significant difference between two groups（P>0.05）. Virtual preoperative planning and 3D-printed templates for pre-contoured plates can reduce operative time and the blood loss of surgery, improve the quality of reduction. This method is efficient, accurate and reliable to treat acetabular posterior wall fractures.

Opportunistic Use of Computed Tomography to Determine Muscle-Adipose Ratio Reliably Predicts Wound Complications after Kocher-Langenbeck Surgical Exposure of the Acetabulum.

To determine whether muscle-to-adipose ratio (MAR) along the course of a Kocher-Langenbeck (KL) incision is more accurate at predicting post-operative wound complications following acetabuluar fixation than waist-hip ratio (WHR) or body mass index (BMI). Retrospective case series. Level-1 Trauma Center.Patients/Participants: Patients who sustained an acetabular fracture and had fixation through a KL approach. The calculation of the MAR. Presence of a surgical site infection or a wound healing complication. 193 patients were included in the study and mean follow-up was 17.4 months. Thirty (15.5%) patients developed a wound complication. Seventeen (8.8%) patients developed a superficial infection and thirteen (6.7%) developed a deep infection. Mean BMI for those who developed a wound complication was 35.9. The mean MAR was 0.67 for patients who developed a wound complication versus 0.75 for those who did not. ROC analysis showed an area under curve (AUC) for BMI to be .717 (95% CI, .577-.857, p = .006) and for MAR to be .680 (inverted, 95% CI .507-.854, p = .022). The AUC for WHR was not statistically significant. MAR is a significant predictor of post-operative wound complication in obese patients undergoing treatment of posterior wall acetabular fractures. The higher rate of wound complications in patients with a low MAR should be considered in the treatment of these patients and may be used to guide discussion regarding the risks of surgery, as well as the potential use of adjuncts to reduce wound healing complications. Prognostic Level III. See Instructions for Authors for a complete description of levels of evidence.

3D printing-assisted total hip arthroplasty and internal fixation for the treatment of fresh acetabular fracture and femoral head necrosis: A case report

Rationale: Posterior wall comminuted fractures of the acetabulum are typically caused by high-energy trauma, and the complex anatomical structure of the acetabulum makes their treatment challenging. However, reports of the treatment of fresh acetabular fractures combined with femoral head necrosis are extremely rare. Patient concerns: A 57-year-old male, injured in a car accident, presented with right hip pain and limited mobility. At the age of 50, the patient was diagnosed with avascular necrosis of the right femoral head, experiencing right hip pain and a limp while walking, for which conservative treatment was initiated. Diagnosis: The patient was clinically diagnosed with fresh comminuted posterior wall acetabular fracture and late-stage femoral head necrosis. Interventions: We applied 3D printing technology and computer-assisted virtual surgical techniques for preoperative planning, simulated fracture reduction, and designed personalized bone plates and screws for fixation of the posterior wall of the acetabulum. A single-stage total hip arthroplasty was performed to treat femoral head necrosis. Outcomes: He began walking with the assistance of a walker 1 month after surgery, and at 6 months post-surgery, the acetabular posterior wall fracture had effectively healed, allowing the patient to return to work. Lessons: The application of 3D printing technology in acetabular internal fixation and total hip arthroplasty is helpful for fracture assessment, facilitates smooth surgery, promotes fracture reduction and healing, restores hip joint function, and ensures a high level of safety.

A single shot arthroscopic reduction and screw fixation of posterior wall acetabular fracture

A single shot arthroscopic reduction and screw fixation of posterior wall acetabular fracture

Outcomes of spring-locking plate fixation method using locking mesh plate/box plate for posterior wall fractures of the acetabulum: a retrospective single-centre study

IntroductionThis retrospective study evaluated the outcomes of variable-angle locking compression plate, mesh plate, or footplate box fixation for posterior acetabular wall fractures. Patients and methodsThe study included nine patients with unstable posterior acetabular wall fractures who underwent internal fixation with the "spring-locking plate fixation method" between January 2015 and December 2019. Patient demographics, fracture classifications, surgical details, radiological and clinical evaluations, and complications were collected from electronic medical records. Statistical analyses were performed to assess the relationship between preoperative and postoperative dislocations. ResultsThe mean age of the patients was 46 years, and the majority were men (88.9%). Fracture types included posterior wall fractures and posterior column plus posterior wall fractures. The mean operative time was 246 min and the mean blood loss was 663 mL. The surgical approaches included the Kocher–Langenbeck, Ganz trochanteric flip, and transtrochanteric approaches. Variable-angle locking compression plate mesh plates and footplate box type implants were used for fixation. The mean preoperative dislocation was 23 mm, which was significantly reduced to 1 mm immediately post-operation and at the final observation. The bone fusion rate was 100% and radiological and clinical evaluations revealed favourable outcomes. Complications were minimal, with mild heterotopic ossification observed in four patients. ConclusionThe spring-locking plate fixation method demonstrated satisfactory outcomes for the treatment of posterior acetabular wall fractures. This technique provides rigid fixation. Furthermore, the use of variable-angle locking screws minimizes the risk of intra-articular perforations. Despite limitations such as a small sample size and the absence of a control group, the results suggest that the spring-locking plate fixation method may be valuable in managing these fractures.

Predictors for post-traumatic hip osteoarthritis in patients with transverse acetabular fractures following open reduction internal fixation: a minimum of 2 years’ follow-up multicenter study

BackgroundThe predictors of post-traumatic osteoarthritis (PTOA) in patients with transverse acetabular fractures (TAFs) following open reduction internal fixation (ORIF) remain unclear. This study aimed to investigate the risk factors for PTOA in TAFs after ORIF.MethodsData of TAF patients receiving ORIF were collected from January 2012 and February 2021. Patients suffered PTOA were classified as the osteoarthritis group (OG), while those without PTOA were classified as the non- osteoarthritis group (NG) with a minimum follow-up of 2 years. PTOA was diagnosed according to Tönnis OA classification during the period of follow-up. Univariate analysis, logistic regression analysis, and receiver operating characteristic (ROC) curve analyses were used to evaluate demographics, injury-related characteristics, perioperative and post-discharge information.ResultsThree hundred and eleven TAF patients were analyzed in this study, including 261 males and 50 females, with a mean age of 40.4 years (range 18 to 64 years). The incidence of PTOA was 29.6% (92 of 311) during the mean follow-up of 36.8 months (range 24 to 70 months). Several factors of PTOA were found using univariate analysis, including transverse fracture associated with posterior wall acetabular fracture (TPW-AF, p = 0.002), acetabular roof fracture (ARF, p = 0.001), femoral head lesion (FHL, p = 0.016), longer time from injury to surgery (TIS, p＜0.001) and physical work after surgery (PWAS, p＜0.001). Logistic regression analysis showed that TPW-AF (p = 0.007, OR = 2.610, 95%CI: 1.302–5.232), ARF (p = 0.001, OR = 2.887, 95%CI: 1.512–5.512), FHL (p = 0.005, OR = 2.302, 95%CI: 1.283–4.131), TIS (p<0.0001, OR = 1.294, 95%CI: 1.192–1.405) and PWAS (p<0.0001, 3.198, 95%CI: 1.765–5.797) were independent risk factors of PTOA. Furthermore, ROC curve analysis indicated 11.5 days as the cut-off values to predict PTOA.ConclusionsOur findings identified that TPW-AF, ARF, FHL, TIS and PWAS were independent risk factors for PTOA in patients with TAFs following ORIF. It can help orthopedic surgeons to take early individualized interventions to reduce its incidence.

The Association between Hip Joint Morphology and Posterior Wall Fracture: Analysis of Radiologic Parameters in Computed Tomography.

Although numerous radiologic parameters of abnormal hip joint morphology are utilized in practice, studies on the relation of these parameters to acetabular fractures are limited. This study hypothesized that certain morphological features of hip joints are associated with acetabular posterior wall (PW) fracture patterns and aimed to identify morphological characteristics predictive of acetabular PW fracture. The records of 107 consecutive patients, who were diagnosed with acetabular fractures in a level I trauma center from August 2017 to April 2021, were initially reviewed. After excluding patients who lacked proper radiographic evaluation and had previous surgery or concomitant injury on the ipsilateral lower limb, a total of 99 patients were analyzed to investigate the morphological characteristics of the hip joint, measured in computed tomography, associated with acetabular posterior wall fracture. We included patient demographics, acetabular index (AI), sharp angle, acetabular depth-to-width ratio (AD/WR), center-edge angle (CEA), head-neck offset ratio (HNOR), acetabular head index (AHI), anterior acetabular sector angle (AASA), posterior acetabular sector angle (PASA), and acetabular version angle (AVA) in the univariate and multivariate analyses. The injury mechanism (p = 0.001) and AD/WR (p = 0.021) were predictors of PW fracture in the univariate analysis. In the multivariable analysis, injury mechanism (p = 0.011), AI (coefficient B = 0.320; Exp (B) = 1.377; p = 0.017), and AD/WR (coefficient B = 33.047; Exp (B) = 2.250 × 1014; p = 0.028) were significant predictors of PW fracture. This study highlights the importance of morphological factors, such as a larger AI and AD/WR, that may influence joint stress distribution, resulting in acetabular PW fracture. Understanding these pathomechanisms may protect the hip joint and prevent future injuries through the early identification and treatment of pathological conditions.

Three-Dimensional Printed Plate Template Versus Hemipelvis Model in Patient-Specific Plate Preparation for Posterior Wall Acetabular Fractures.

The application of three-dimensional (3D) printing technology in the management of posterior wall acetabular fractures can greatly reduce surgical invasiveness and operative time and simplify the procedure of reconstruction plate contouring, but the cost and time of patient-specific plate preparation on the basis of traditional 3D-printed pelvis model should not be neglected. We described a new method for patient-specific plate preparation by using 3D-printed plate template. The study aimed to assess the effectiveness and feasibility of the 3D-printed plate template in patient-specific plate preparation for posterior wall acetabular fractures. A total of 65 cases of posterior wall acetabular fractures with surgical treatment from December 2012 to December 2020 were chosen. According to the different plate contouring methods, the 65 cases were divided into three groups, which were group A (21 cases), group B (20 cases), and group C (24 cases). In group A, the 3D-printed plate template was used to contour the patient-specific reconstruction plate before surgery, whereas the 3D-printed hemipelvis model was adopted for group B. In group C, the reconstruction plate was contoured intraoperatively. Among the three groups, the instrumentation time, surgical time, blood loss, patient-specific plate preparation time, complications, reduction quality, and hip function were compared. The Kruskal-Wallis test was used to analyze the reduction quality and hip function among three groups. In comparison with group C, patients in groups A and B were featured by obviously shorter instrumentation time (-22, -23 min), shorter surgical time (-46, -44 min), and less intraoperative blood loss (-110, -122 mL). Compared to the hemipelvis model in group B (2.29 ± 0.56 vs. 12.70 ± 3.79 days), the 3D printing time for plate templates in group A was significantly shorter. The reduction quality and hip function had no obvious statistical difference among the three groups. The complication rate within group A (3/21) and group B (3/20) were both slightly lower than group C (5/24), with no obvious difference. Both the patient-specific pre-contoured plate fixation methods based on the 3D-printed hemipelvis model and plate template can achieve satisfactory clinical efficacy, with the advantage of shorter instrumentation and surgical time, and less intraoperative blood loss. However, 3D printing of plate template is easier and less time-consuming, considering the shorter time and less cost for 3D printing of physical model.

Surgeon Accuracy in Prediction of Stability of Posterior Wall Acetabular Fractures.

This study aims to investigate surgeon accuracy in prediction of the stability of posterior wall acetabular fractures by comparing "examination under anesthesia" (EUA) findings to submitted estimations on the basis of radiograph and computed tomography (CT) imaging across a range of experience in Orthopaedic surgeons and trainees. Records of patients who underwent EUA after presenting with posterior wall acetabular fractures at 2 different institutions were pooled for data collection, totaling 50 cases. Radiographs, CT images, and information regarding the presence of a hip dislocation requiring procedural reduction were provided to participants for review. A survey was generated for submission of impressions of stability for each individual case and disseminated amongst Orthopaedic trainees and surgeons in practice. The submissions of 11 respondents were analyzed. Mean accuracy was calculated to be 0.70 (SD 0.07). Sensitivity and specificity of respondents were 0.68 (SD 0.11) and 0.71 (SD 0.12) respectively. Positive predictive value and negative predictive value for respondents were 0.56 (SD 0.09) and 0.82 (SD 0.04) respectively. There was poor correlation of accuracy with years of experience with R2 calculated to be .0004 and poor agreement between observers with Kappa measurement of interobserver reliability of 0.46. In conclusion, our study suggests that surgeons are unable to consistently differentiate between stable and unstable patterns on the basis of X-Ray and CT based assessments. Years of experience in training/practice was not found to be associated with improved accuracy of stability prediction.

Transverse posterior wall acetabular fracture pattern is associated with increased risk of periprosthetic joint infection after conversion total hip arthroplasty

IntroductionAcetabular fracture subtypes are associated with varying rates of subsequent conversion total hip arthroplasty (THA) after open reduction internal fixation (ORIF) with transverse posterior wall (TPW) patterns having a higher risk for early conversion. Conversion THA is fraught with complications including increased rates of revision and periprosthetic joint infections (PJI). We aimed to determine if TPW pattern is associated with higher rates of readmissions and complications including PJI after conversion compared to other subtypes. MethodsWe retrospectively reviewed 1,938 acetabular fractures treated with ORIF at our institution from 2005 to 2019, of which 170 underwent conversion that met inclusion criteria, including 80 TPW fracture pattern. Conversion THA outcomes were compared by initial fracture pattern. There was no difference between the TPW and other fracture patterns in age, BMI, comorbidities, surgical variables, length of stay, ICU stay, discharge disposition, or hospital acquired complications related to their initial ORIF procedure. Multivariable analysis was performed to identify independent risk factors for PJI at both 90-days and 1-year after conversion. ResultsTPW fracture had higher risk of PJI after conversion THA at 1-year (16.3% vs 5.6%, p = 0.027). Multivariable analysis revealed TPW independently carried increased risk of 90-day (OR 4.89; 95% CI 1.16–20.52; p = 0.03) and 1-year PJI (OR 6.51; 95% CI 1.56–27.16; p = 0.01) compared to the other acetabular fracture patterns. There was no difference between the fracture cohorts in 90-day or 1-year mechanical complications including dislocation, periprosthetic fracture and revision THA for aseptic etiologies, or 90-day all-cause readmission after the conversion procedure. ConclusionAlthough conversion THA after acetabular ORIF carry high rates of PJI overall, TPW fractures are associated with increased risk for PJI after conversion compared to other fracture patterns at 1-year follow-up. Novel management/treatment of these patients either at the time of ORIF and/or conversion THA procedure are needed to reduce PJI rates. Level of evidenceTherapeutic Level III (retrospective study of consecutive patients undergoing an intervention with analyses of outcomes).

Finite element analysis of posterior acetabular column plate and posterior acetabular wall prostheses in treating posterior acetabular fractures

BackgroundThe purpose of this study was to investigate the mechanical stability of the posterior acetabular column plate and different posterior acetabular wall prostheses used in treating posterior acetabular fractures with or without comminution.MethodsThe unilateral normal ilium was reconstructed, and a model of posterior acetabular wall fracture was established on this basis. The fracture fragment accounted for approximately 40% of the posterior acetabular wall. The posterior acetabular column plate and different posterior acetabular wall prostheses were also designed. Using static and dynamic analysis methods, we observed and compared the changes in the stress and displacement values of different models at different hip joint flexion angles under external forces.ResultsAt different hip flexion angles, the stress of each model mainly fluctuated between 37.98 MPa and 1129.00 MPa, and the displacement mainly fluctuated between 0.076 and 6.955 mm. In the dynamic analysis, the nodal stress‒time curves of the models were nonlinear, and the stress changed sharply during the action time. Most of the nodal displacement‒time curves of the models were relatively smooth, with no dramatic changes in displacement during the action time; additionally, most of the curves were relatively consistent in shape.ConclusionsFor simple posterior acetabular wall fractures, we recommend using a posterior acetabular column plate. In the case of comminuted posterior acetabular fractures, we recommend the use of a nonflanked posterior acetabular prosthesis or a biflanked posterior acetabular prosthesis. Regarding the method of acetabular prosthesis design, we propose the concept of “Break up to Make up” as a guide.

Spring Plates as a Valid Additional Fixation in Comminuted Posterior Wall Acetabular Fractures: A Retrospective Multicenter Study.

The posterior wall fracture is the most frequent pattern of acetabular fractures. Many techniques of fixation have been described in the literature and involve plates, screws, or a combination of both. This study aims to investigate the clinical and radiological outcomes of spring plates in the treatment of comminuted posterior wall acetabular fractures. (2) Methods: A retrospective multicenter (four level I trauma centers) observational study was performed. Patients with a comminuted posterior wall acetabular fracture treated with a spring plate (DePuy Synthes, West Chester, PA) were included. Diagnosis was made according to the Judet and Letournel classification. Diagnosis was confirmed with plain radiographs in an antero-posterior view and Judet views, iliac and obturator oblique views, and thin-slice CT with multiplanar reconstructions. (3) Results: Forty-six patients (34 males and 12 females) with a mean age of 51.7 years (range 19-73) were included. The most common mechanism of injury was motor vehicle accident (34 cases). In all cases, spring plates were placed under an overlapping reconstruction plate. The mean follow-up was 33.4 months (range 24-48). The mean period without weight-bearing was 4.9 weeks (range 4-7), and full weight-bearing was allowed at an average of 8.2 weeks (range 7-11) after surgery. (4) Conclusions: According to the present data, spring plates can be considered a viable additional fixation of the posterior wall acetabular fractures.

Posterior Wall Acetabular Fracture After Low-Energy Trauma Masquerading as Infection: A Case Report.

A 12-year-old adolescent boy presented after a low-energy fall with groin pain, inability to bear weight, painful passive range of motion, fever, elevated inflammatory markers, and upper respiratory symptoms. Initial radiographs did not demonstrate any abnormality, and magnetic resonance imaging suggested infection. Posterior wall acetabular fracture was not diagnosed until a computed tomography-guided biopsy was performed. Pediatric acetabular fractures are exceedingly rare. They can be difficult to diagnose after low-energy trauma as symptoms mimic infectious hip pathologies. Children presenting with infectious hip symptomology and a history of trauma may benefit from more extensive trauma imaging before costly and invasive infectious diagnostic procedures.

Heterotopic Ossification Remodeling After Acetabular Surgery: A Natural History Case Report.

A 30-year-old woman presented with a transverse plus posterior wall acetabular fracture and underwent operative fixation through a Kocher-Langenbeck approach. Shared decision was made for no heterotopic ossification (HO) prophylaxis. The patient developed symptomatic HO and was scheduled for resection, which was delayed because of the pandemic. She returned with interval remodeling of HO and symptom resolution. No surgery was required. HO is a common complication after acetabular injury. Resection is the treatment of choice for symptomatic HO. We are not aware of other reports of spontaneous remodeling of symptomatic HO such that it no longer required surgery.