Posterior Teeth Region Research Articles

Clinical study of immediate implant placement in posterior maxillary region assisted by dynamic real-time navigation: A randomized controlled trial

ObjectiveTo evaluate the accuracy of the implant accuracy and clinical effect of navigation-assisted immediate implant placement (IIP) in the posterior maxillary tooth region. MethodsThis study included 60 patients with 96 implants undergoing IIP in the posterior maxillary region from January 2021 to December 2022, stratified into dynamic navigation and freehand implant groups. All clinical indicators, including initial stability, implant deviation (entry point deviation, end point deviation, depth deviation and angle deviation), marginal bone resorption and implant success rate, were systematically recorded. ResultsAll implants were successfully placed with an average torque of (24.38 ± 1.84)N.cm. The mean entry point deviation, apex point deviation and angular deviation in the navigation group were significantly smaller than that of the freehand group (P < 0.05). Marginal bone resorption was significantly less in the navigated group than in the freehand group (P < 0.05). All dental implants were considered an operational success and the mean follow-up time was (27.8 ± 8.4) months. ConclusionThe application of dynamic navigation-assisted immediate implant placement in the maxillary posterior region can achieve good implant accuracy and satisfactory clinical results.

A novel algorithmic approach for automatic virtual articulation to avoid dynamic interferences in dental restoration designs.

There is an ongoing debate about the benefits of the facebow and individual articulator settings in prosthodontics when compared with simpler methods. The present study aims to determine whether the implementation of novel algorithmic articulator concepts may be an alternative to avoid dynamic interference contacts during the design process of fixed posterior restorations, and to what extent the occlusal morphology of the restoration is affected. From a chairside CAD database, a total of 50 clinical patient cases documenting 61 planned fixed restorations in the posterior tooth region were selected. A common CAD software program was used for the automated knowledge-based design process. When designing the restorations, functional concepts were applied, including the pure static occlusion, the average articulation, three different articulator settings as a control, and a combination of a broad range of articulation parameters (the full range dynamic articulation). The resulting dynamic contact points were compared both visually and metrically with a monitoring software program. There is a highly significant difference in avoiding dynamic interference contacts when applying the full range dynamic articulation compared with the pure static occlusion (P < 0.001) and the average articulation (P < 0.001). Furthermore, the superimposition revealed that the surface of the restorations showed nearly no visual morphologic changes after virtually grinding-in the interpenetrating contact points. The full range dynamic articulation can be used for the design of small fixed posterior restorations to avoid most dynamic interference contacts without the need for determining individual parameters for each patient.

Evaluation of Stresses Generated with Two Different Self-Ligating Orthodontic Bracket Systems - A Finite Element Analysis.

To determine stresses generated in the posterior teeth region by two different self-ligating systems, 3M Unitek SmartClip and Damon Q Self-ligating brackets, using the finite element method (FEM). Computed tomography (CT) scan of maxilla was taken using Mimics software, and the Dicom data were imported into Hypermesh 13.0 software to convert it into a geometric model and then into FEM. Physical models of both the brackets were constructed and positioned on the teeth. Post archwire modeling, contact is defined between the bracket slot and 0.014" NiTi arch wire. The final assembled model was exported to ANSYS 12.1 for analysis, and 60 grams of load was applied at the ends of the arch wire. On using 0.014" CuNiTi in both the bracket systems, stresses generated on the root surface were found to be maximum on the first molar region, followed by the first premolar, second molar, canine, and second premolar regions. Comparison between the two bracket systems showed differences in the stresses generated, where higher stresses were generated at all regions in the Damon Q bracket system, except the inter-second premolar region. Maximum stresses were observed with the 3M Unitek SmartClip bracket system at the second premolar cervical region when compared to the Damon Q system. In both the cortical bone and cancellous bone, maximum stresses were observed at the second premolar cervical in the Damon Q bracket system region.

Assessment of CBCT gray value in different regions-of-interest and fields-of-view compared to Hounsfield unit.

Different factors can affect the discrepancy between the gray value (GV) measurements obtained from CBCT and the Hounsfield unit (HU) derived from multidetector CT (MDCT), which is considered the gold-standard density scale. This study aimed to explore the impact of region of interest (ROI) location and field of view (FOV) size on the difference between these two scales as a potential source of error. Three phantoms, each consisting of a water-filled plastic bin containing a dry dentate human skull, were prepared. CBCT scans were conducted using the NewTom VGi evo system, while MDCT scans were performed using Philips system. Three different FOV sizes (8 × 8 cm, 8 × 12 cm, and 12 × 15 cm) were used, and the GVs obtained from eight distinct ROIs were compared with the HUs from the MDCT scans. The ROIs included dental and bony regions within the anterior and posterior areas of both jaws. Statistical analyses were performed using SPSS v. 26. The GVs derived from CBCT images were significantly influenced by both ROI location and FOV size (p < 0.05 for both factors). Following the comparison between GVs and HUs, the anterior mandibular bone ROI represented the minimum error, while the posterior mandibular teeth exhibited the maximum error. Moreover, the 8 × 8 cm and 12 × 15 cm FOVs resulted in the lowest and highest degrees of GV error, respectively. The ROI location and the FOV size can significantly affect the GVs obtained from CBCT images. It is not recommended to use the GV scale within the posterior mandibular teeth region due to the potential for error. Additionally, selecting smaller FOV sizes, such as 8 × 8 cm, can provide GVs closer to the gold-standard numbers.

Evaluation of Cortical Thicknesses and Bone Density Values of Mandibular Canal Borders and Coronal Site of Alveolar Crest.

The objectives of this retrospective study are to measure the amount of the alveolar crest cortication and cortication around the mandibular canal, and to evaluate bone density values of alveolar crest, cortication around mandibular canal, and possible implant placement area for edentulous sites. Six hundred forty-two cone-beam computed tomography scans from 642 subjects were evaluated in four centers. Cortical thicknesses of alveolar crest and mandibular canal cortical borders (buccal, lingual, apical, and coronal) in each mandibular posterior teeth region were measured. Bone density of alveolar crest and mandibular canal cortical borders (buccal, lingual, apical, and coronal) in each mandibular posterior teeth region were recorded. The correlations between numeric variables were investigated using Pearson's correlation test. The largest cortical border of the canal was measured 1.1 (SD 0.71) mm at the left second molar area and in coronal side of the mandibular canal (MC). Left and right first premolar regions showed higher bone density values compared to the other sites in all bone density values evaluations. The buccal side of the canal at the right first premolar region showed the highest bone density values (832.32 [SD 350.01]) while the coronal side of the canal at the left second molar region showed the lowest (508.75 [SD 225.47]). The bone density of possible implant placement area at the both left (692.25 [SD 238.25]) and right (604.43 [SD 240.92]) edentulous first premolar showed the highest values. Positive correlations between the bone density values of alveolar crest and the coronal side of MC were found in molar and left second premolar regions (P < 0.05). Results may provide information about the amount of cortication and bone densities tooth by tooth for posterior mandible to surgeons for planning the treatment precisely.

Effect of bonded and removable retainers on occlusal settling after orthodontic treatment: A systematic review and meta-analysis.

This systematic review and meta-analysis aimed to summarize the effectiveness of bonded and removable retainers (the Hawley and Essix retainers) in terms of improving occlusal settling (occlusal contact points/areas) after orthodontic treatment. We searched the Cochrane Library, PubMed, CINAHL Plus, and Dental & Oral Sciences Source (DOSS), as well as SIGLE, Google Scholar and ClinicalTrials.gov for eligible studies. We included randomized and non-randomized controlled trials along with cohort studies. Studies that reported occlusal contacts/areas during retention with fixed bonded and removable retainers were included. To assess the quality of the randomized controlled trials (RCTs), the Cochrane Collaboration risk-of-bias (RoB) tool was utilized, whereas the Newcastle-Ottawa Scale (NOS) was used to assess the quality of cohort studies.We included 6 articles in our systematic review after scrutinizing 219 articles and eliminating the illegible ones based on duplication, titles, abstracts, and objectives. Bonded retainers (BRs) allowed faster and better posterior occlusal settling as compared to the Hawley retainer (HR). However, HR showed good occlusal settling in the anterior dental arch. The Essix retainer (ER) showed a decrease in occlusal contact during the retention phase. Meta-analysis showed no statistically significant difference between BRs and removable retainers. In conclusion, HR allowed better overall occlusal settling as compared to other retainers. However, BRs allowed faster settling in the posterior tooth region. The Essix retainer showed poor settling of occlusion. Overall, there is an insufficient number of high-quality RCTs to provide additional evidence, and further high-quality RCTs are needed.

Effects of Crest Morphology on Lingual Concavity in Mandibular Molar Region: an Observational Study.

The aim of this radiological study is to evaluate the lingual concavity dimensions and possible implant length in each posterior tooth region according to posterior crest type classification by using cone-beam computed tomography. According to inclusion criteria, 836 molar teeth regions from 209 cone-beam computed tomography images were evaluated. Posterior crest type (concave, parallel, or convex), possible implant length, lingual concavity angle, width, and depth were recorded. In each posterior tooth region, concave (U-type) crest was detected most frequently while convex (C-type) was the lowest. Possible implant length values were higher in second molar regions than first molars. Lingual concavity width and depth were decreasing from second molars to first molars for both sides. Additionally, lingual concavity angle showed higher values in second molar sites than first molars. In all molar teeth regions, lingual concavity width values were the highest in concave (U-type) crest type while they were the lowest in convex (C-type) crest type (P < 0.05). Lingual concavity angle values were recorded as the highest in concave (U-type) and the lowest in convex (C-type) crest type at the left first molar and right molars (P < 0.05). The lingual concavity dimensions and possible implant length may vary according to crest type and edentulous tooth region. Due to this effect, the surgeons should examine crest type clinically and radiologically. All parameters in the present study are decreasing while moving from anterior to posterior as well as from concave (U-type) to convex (C-type) morphologies.

Occlusal contact and clearance of posterior implant-supported single crowns designed by two different methods: a self-controlled study

BackgroundPrecise occlusal design of implant-supported fixed prostheses is difficult to achieve by the conventional wax-up method, often requiring chairside adjustments. The computer-aided design (CAD) method is promising. This study aims to compare the occlusal contacts and clearance of posterior implant-supported single crowns designed by the CAD and conventional methods.MethodsSample size calculation indicated fourteen samples per group. Two sets of type-IV plaster casts with a single implant analog inserted in the posterior teeth region were mounted as master casts in a mechanical articulator in maximal intercuspal position (MIP). Seven working cast sets were obtained from each master cast by a closed tray technique, and mounted in MIP. Two implant-supported single crowns were designed with an occlusal clearance to achieve light occlusal contact in each working cast set by CAD and conventional method, separately. For the CAD group, the crown was designed in digital models obtained by scanning the working casts. For the conventional group, wax-up of the crown was prepared on the working casts and scanned to generate a STL file. In the working and master casts, mean and minimum occlusal clearances in the designed occlusal contact area of the both finished prostheses were calculated using the occlusal clearance (OC) and occlusal record (OR) method. The prostheses’ occlusion was evaluated in master casts.ResultsFor the evaluation in the working casts, both design methods had similar mean occlusal clearances by the OC method (195.4 ± 43.8 vs. 179.8 ± 41.8 μm; P = 0.300), while CAD group resulted in a significantly larger minimum occlusal clearance in the designed occlusal contact area (139.5 ± 52.3 vs. 99.8 ± 43.8 μm; P = 0.043). Both design methods had similar mean and minimum occlusal clearances by the OR method (P > 0.05). For the evaluation in the master casts, both design techniques had similar mean and minimum occlusal clearances, number and distribution of occlusal contacts, and lateral interference ratios (P > 0.05).ConclusionOcclusal contact and clearance of posterior implant-supported single crowns designed by the CAD method can be at least as good as those designed by the conventional wax-up method.

Lateral approach sinus (LAS) and crestal approach sinus (CAS): The unravelled paraphernalia for maxillary sinus membrane advancement

The permanent replacement of missing teeth in the maxillary posterior tooth region becomes a tedious task when it is confounded with bone atrophies. To overcome this problem and achieve successful rehabilitation, maxillary sinus membrane elevation procedures have been advocated as the most reliable means. The lateral window technique and the crestal approach are two of the most common approaches. These technologically developed procedures have reported high success rates in cases of deficient residual bone. Over time, there have been many advancements in these techniques that led to the development of user-friendly kits like the Lateral approach Sinus (LAS) kit and the Crestal approach Sinus (CAS) kit. In this case series, we have reported two cases, treated with either of these approaches and have compared the same. We aim at highlighting their ease of application in the clinical field and the promising results obtained with their use. Our clinical experience disclosed that maxillary sinus membrane advancement using both the kits have proven to be a reliable technique for implant placement in sites where insufficient bone is available.

Management of an Oral Fibroma by Scalpel Excision in a Patient on Anticoagulant Therapy: A Case Report

A traumatic or irritational fibroma is the most prevalent submucosal reactive lesion in the oral cavity. It forms as a result of irritation or trauma and is composed of fibrous or connective tissue. Although electrical or laser surgery is beneficial for the excision of oral fibroma in patients taking anticoagulant, but these devices may not be available in all clinical settings. This case report aims to demonstrate scalpel excision as an effective and convenient surgical treatment for the management of the fibroma in patient having anticoagulant drug instead of using electrical, laser, or cryosurgery. A female patient, 70 years old, reported to the department with a chief complaint of painless swelling in the right lower posterior tooth region for the past 2 years. On examination, the lesion was found to be a well circumscribed, smooth, tender, firm, and lobulated pink swelling 1x0.8x0.5 cm in diameter positioned on the buccal mucosa of the right molar region. Surgical therapy was carried out by scalpel excision, followed by medication for the management. In compared to electrical, laser, and cryosurgery, scalpel excision was a simple and effective approach to successfully remove the fibroma, and complete healing of the surgical site was observed after 2 months.

Resolution of chronic secondary rhinosinusitis of odontogenic origin after endodontic treatment: A case report

Introduction: A case of successful resolution of odontogenic rhinosinusitis after endodontic treatment is presented. Case Report: The patient previously diagnosed with rhinosinusitis presented with an active parulid between the 25 and 26 teeth. The sinus tract-tracing indicated 26 tooth as the source and periapical radiography showed a chronic apical periodontitis lesion. A cone beam computed tomography (CBCT) demonstrated hyperdense imaging on the floor of the left maxillary sinus of posterior teeth region, and rupture of the cortical bone of sinus floor and thickening of its membrane. The odontogenic localized secondary rhinosinusitis was diagnosed. Conventional endodontic treatment was performed with intracanal medication. Nine months later, the patient returned without symptoms and the new CBCT showed no periradicular lesion, corticalization of the maxillary sinus floor, and no sinus disease. Conclusion: The dental resolution of presented case showed that patients with unsuccessful previous treatment for rhinosinusitis may suffer from endodontic diseases, which may fail without the dentist’s approach. The presented case showed that the implemented treatment protocol was effective to improve the patient’s health, as well shows the necessity of proper approach to achieve success.

Comparative analysis of various temporary computer-aided design/computer-aided manufacturing polymethyl methacrylate crown materials based on color stability, flexural strength, and surface roughness: An in vitro study.

With recent advancements in digital dentistry, computer-aided design/computer-aided manufacturing (CAD/CAM) processed prostheses have been in very much use recently. This study aims to assess and compare the properties of these materials to better enable the practitioners to select the type of materials for use in a normal clinical practice. This research study was commenced after the approval by our Institutional Review Board (IHEC/SDC/PROSTHO/21/119). Twelve specimens of each group (group 1: CAD/CAM milled prostheses and group 2: three-dimensional (3D) printed prostheses using rapid prototyping) were prepared using the ISO standardization 10477:2004. The flexural strength of the samples that were prepared was tested using a universal testing machine and the values obtained were evaluated. Other samples (ISO standardized) were collected for evaluation of color changes postaging and surface roughness of both groups. Unpaired t-test to analyze flexural strength and surface roughness and Paired t-test was used to statistically analyze the values obtained for color stability. Group 1 showed significantly higher flexural strength and significantly better color stability when the samples were subjected to thermocycling. The mean strength obtained for 3D printed polymethyl methacrylate (PMMA) was 80.06MPa, whereas the mean flexural strength recorded for milled PMMA was 128.32 MPa. There was not much difference observed in the surface roughness of both groups. CAD/CAM milled specimens presented with better color stability and strength when compared to 3D printed specimens. Practitioners should be cautious while using three-dimensionally printed temporary prostheses in the posterior tooth region.

Evaluation of the posterior superior alveolar artery location and diameter with a newly defined stable plane

The aim of this study was to analyse the vertical location of the posterior superior alveolar artery (PSAA) using a reliable new reference plane regardless of tooth and alveolar bone, and to measure the diameter in each posterior tooth region, which is of relevance to lateral sinus floor elevation surgery. A total of 270 sinuses in 139 patients were examined in this study. The A-plane was defined by A-point and the bilateral jugal points on reconstructed three-dimensional images. The distance from the PSAA to the defined plane was measured in four regions: first premolar (P1), second premolar (P2), first molar (M1), and second molar (M2). The average distance of the PSAA above the plane in the P1, P2, M1, and M2 regions was determined to be 10.24mm, 7.35mm, 5.47mm, and 7.23mm, respectively. The PSAA was found to run above the plane in 97.4% of sinuses, below the plane in 1.1%, and on the plane in 1.5%. In conclusion, the new plane is useful for intraoperative location of the PSAA. According to the study findings, the area below the reference plane can be considered safe for lateral approach sinus surgery in terms of preserving the integrity of the PSAA.

Management of A Case of Fibro-epithelial Hyperplasia of Gingiva

ABSTRACT:&#x0D; Fibroepithelial hyperplasia/fibroma is an exophytic growth which occurs due to any reactive or chronic inflammatory condition of the gingiva by plaque, calculus, overhanging margins, trauma and dental appliances. These can cause discomfort to the patient and often causes difficulty in oral hygiene maintenance. This case report presents a case of a fibro-epithelial hyperplasia in a 37 years old female, who presented with a localized diffuse type of gingival enlargement in the left maxillary posterior teeth region. Based on clinical and histopathological evaluation the diagnosis of fibro-epithelial hyperplasia was made. The patient was then kept on regular follow-up and no recurrence of the lesion could be appreciated till date.

Inferior alveolar nerve topography and its bifurcation features: a cone beam computed tomography evaluation.

Mandibular canal (MC) is the most important vital structure in mandible to prevent from complications such as bleeding and paresthesia. The aims of the present study were to inform the features (diameter, distances to the mandibular borders, and distance to tooth apex) of the MC for each posterior tooth region, and to present the bifurcation features of the MC. Four-hundreds-eighteen MC images of 209 patients were evaluated. The parameters were recorded from right and left hemi-mandibles for each posterior teeth region: 1) MC diameter; 2) MC and mandibular basis distance; 3) MC and crest distance; 4) MC and tooth apex distance; 5) MC and buccal plate distance; 6) MC and lingual plate distance; and 7) possible implant length (the distance between 2 mm coronal of the MC and 1 mm apical of the crest). Additionally, MC bifurcation type and bifid mandibular canal length were noted for right and left sides. While higher MC diameter values were recorded at molars, MC diameter in first premolars bilaterally were the lowest. In premolars, MC and mandibular basis distance showed higher values than molars. There was a trend of decrease in MC and crest distance from molars to premolars. The highest MC and tooth apex distance was measured in second molar; however, the lowest was in the first premolar. Additionally, MC and buccal plate distances were higher in molars, while MC and lingual plate distances were higher in premolars. Possible implant length in first premolar was the lowest, when it was the highest in second molars. For simulating overall MC topography, it extended bucco-coronally from molars to premolars. Due to this topography, possible implant length increased from premolars to molars.

Dental caries: Impact of tobacco product among tobacco chewers and tobacco smokers

ObjectiveTobacco is the most significant social burden and the leading cause of death. Tobacco is derived from “Nicotiana tabacum” which has nicotine as the main component. There are various disadvantages from tobacco on health which are reported in the medical literature. But the risk of caries among these tobacco users, such as chewers and smokers, is still debatable. Hence, the present study aims to determine the prevalence of dental caries among tobacco chewers and smokers. Materials and methodsIn this study, 389 individuals were included. Out of 389 individuals, 304 were men and 85 were women aged between 18 and 60 years. They were classified into two groups. Group A had 207 individuals with habitual tobacco chewing, and Group B had 182 individuals with habitual tobacco smoking and provided a 6 months history. The DMFT index (Decayed, Missing, and filled teeth index-WHO modification 1997) was used to assess caries. ResultsThe study revealed a higher prevalence of dental caries among tobacco chewers compared to tobacco smokers. The DMFT scores were higher among gutka chewers compared to other types of tobacco use. The lower posterior tooth region showed higher dental caries in tobacco chewers compared to smokers. ConclusionThe higher presence of caries in the tobacco chewing group is due to the presence of sweeteners, which act as cariogenic agents. Similarly, smokers have a thiocyanate component that acts as an anticariogenic agent; therefore, the prevalence of caries was lower in tobacco smokers.

PATIENT’S PERCEPTION OF PAIN AND DISCOMFORT DURING MAXILLARY ARCH EXPANSION USING TWO DIFFERENT APPLIANCES - A PILOT QUESTIONNAIRE SURVEY

Aim: &#x0D; To evaluate and compare perceived pain and discomfort levels experienced by subjects treated with tooth-borne (Hyrax) and bone-borne (MARPE) Maxillary expansion appliances.&#x0D; Materials and Methods:&#x0D; Ten subjects (7 boys and 3 girls) with a mean age of 15.8(+/- 2.8) years were randomized into two groups. Group A received a MARPE appliance anchored using mini-implants in the anterior palate and group B received a conventional Hyrax appliance. A self-assessment questionnaire on pain intensity, discomfort and analgesic consumption was given to subjects on the review visit and responses were collected. Descriptive statistics and Mann-Whitney U test was done to compare the mean of pain and discomfort levels between the two groups.&#x0D; Results: &#x0D; All 10 subjects answered the questionnaire. More pain was experienced in the posterior teeth region by subjects treated with MARPE (p&amp;lt;0.05). No significant intergroup difference in pain levels experienced in the anterior region, palatal vault and the head region and analgesic consumption was noted. (p&amp;gt;0.05)&#x0D; Conclusions:&#x0D; Although both Hyrax and MARPE were generally well tolerated there was a significantly higher pain experience in posterior teeth region for subjects treated with MARPE.

Tooth Loss Patterns in Patients with Periodontitis and Diabetes Mellitus

Aim: Periodontitis is an inflammatory, multifactorial disease which results in destruction of supporting tissue and bone thereby resulting in loosening of the tooth. Tooth loss is one of the major oral issues faced by elderly patients. Thus the present study aimed to investigate the prevalence of tooth loss among periodontitis patients.&#x0D; Methodology: Data collection was conducted from June 2020 to March 2021 among 200 periodontitis patients with diabetes mellitus based on the record management system software to analyse the most frequent missing tooth at the time of first visit. Frequency of maxillary anterior, maxillary posterior, mandibular anterior and mandibular posterior tooth loss was assessed in the study.&#x0D; Results: Among the frequency distribution the mandibular posterior tooth loss was the most common among periodontitis with diabetes patients. In case of anterior tooth loss the results were almost similar with 16% of maxillary anterior tooth loss and 17% in case of mandibular anterior tooth loss. Male subjects presented with more missing teeth in mandibular posterior tooth region when compared to females but not statistically significant (p&gt;0.05).&#x0D; Conclusion: The present study results showed that there is no significant association between sex and maxillary anterior, mandibular anterior, maxillary posterior and mandibular posterior tooth loss (p&gt;0.05). The present study showed that mandibular posterior tooth loss was most frequent among periodontitis with diabetes mellitus patients.

Marfan Syndrome With Recurrent Lower Left Posterior Toothache as the First Symptom: A Report on a Rare Case

Marfan syndrome (MFS) is a life-threatening connective tissue disorder that affects multiple organs and systems. We report a case of MFS with recurrent lower left posterior toothache as the first symptom. A 23-year-old Asian man walked into the dental emergency room with a chief complaint of recurrent spontaneous and intermittent toothache in his lower left posterior tooth region, mimicking acute symptomatic pulpitis. He self-reported a relatively healthy medical status without any hereditary disease. However, his disproportionately elongated body structure, high myopia, and positive wrist sign were immediately recognizable. Although there were no remarkable findings on the dental examination, pectus carinatum deformity and abnormal blood pressure were later detected. He was immediately referred to a cardiologist in a medical hospital. The timely diagnosis of MFS and early surgical intervention helped to avoid severe lethal consequences. The symptoms of toothache completely resolved after surgery.

Relationship between class 1 dental caries and sextant involving caries among patients visiting the outpatient department of Saveetha Dental College, Chennai, India

Depending upon the site of the tooth, accessibility of oral hygiene products like toothbrush, tooth floss etc. different teeth have varying susceptibility to getting infected by cariogenic bacteria. Plaque accumulation, occlusal morphology, oral hygiene practices etc. play an important role in determining the susceptibility of teeth towards caries. A retrospective cross-sectional study was conducted using patient records from the Dental College, Chennai after reviewing and analysing the data of 86000 patients between June 2019 and March 2020. The variables involved were age, gender and site of carious teeth. Data were then exported to the Statistical Package for Social Sciences (SPSS) for Windows (Version 19, 2010) for further analysis. The total sample size was 19014. The sample had a gender distribution of 55.56% males and 44.44% females. Class 1 dental caries was found to be most prevalent in sextant 6 that is the lower right posterior teeth region. Least incidence of class 1 DC was noted in sextant 5, which is the lower anterior teeth. Young adults (18-35 years) had the highest incidence of class 1 dental caries (p&lt;0.05). Among males and females, respectively, class 1 caries was most prevalent in sextant 6 (p&lt;0.05). Within the limits of the study, it can be concluded that caries experience is highest in mandibular posteriors. There was a slight male predilection in the prevalence of class 1 dental caries. Young adults in the age group, 18-35 years, have the highest incidence of class 1 DC.