Posterior Hemitransverse Fractures Research Articles

Endopelvic zones and constant fragment mapping in acetabular fractures

ObjectiveThis study aims to characterize the constant fragment (CF) in acetabular fractures and to provide a novel nomenclature of anatomic zones from the vantage point of the endopelvic approach. DesignRetrospective clinical study SettingUrban Level I trauma center, Patients/participants: One hundred and eleven consecutive acetabular fractures eligible for an AIP approach and treated surgically. Intervention: 3D mapping of the CF line of fractures using a novel endopelvic anatomical zoning system. Main outcome measurement: Correlation of Letournel's fracture types to the size of the CF and its location based on precise anatomical nomenclature. ResultsThe average age of patients was 47 years (range, 12 to 88 years), predominantly comprising male patients (78 %, n = 87) and female patients (22 %, n = 24). Fractures were grouped into 3 categories based on the size of the CF and its location from anterior to posterior. Group 1 included AC fractures which demonstrated the largest CF. The CF nearly always spared Zone 4. Group 2 included transverse fractures, T-Type fractures, and T-Type with posterior wall fractures. The CF was of intermediate size, and it often spared Zone 4. Group 3 included anterior column posterior hemitransverse fractures and associated both column fractures. The CF was the smallest of all categories and rarely spared Zone 4. ConclusionOur analysis suggests consistent and repeatable patterns and sizes of constant fragments. These findings can serve as an endopelvic roadmap for the AIP approach based on fracture types, guiding placement of reduction clamps, vectors of reduction and hardware position.

Acetabular fractures in geriatric patients: epidemiology, pathomechanism, classification and treatment options.

The incidence of geriatric acetabular fractures has shown a sharp increase in the last decades. The majority of patients are male, which is different to other osteoporotic fractures. The typical pathomechanism generally differs from acetabular fractures in young patients regarding both the direction and the amount of force transmission to the acetabulum via the femoral head. Geriatric fractures very frequently involve anterior structures of the acetabulum, while the posterior wall is less frequently involved. The anterior column and posterior hemitransverse (ACPHT) fracture is the most common fracture type. Superomedial dome impactions (gull sign) are a frequent feature in geriatric acetabular fractures as well. Treatment options include nonoperative treatment, internal fixation and arthoplasty. Nonoperative treatment includes rapid mobilisation and full weighbearing under analgesia and is advisable in non- or minimally displaced fractures without subluxation of the hip joint and without positive gull sign. Open reduction and internal fixation of geriatric acetabular fractures leads to good or excellent results, if anatomic reduction is achieved intraoperatively and loss of reduction does not occur postoperatively. Primary arthroplasty of geriatric acetabular fractures is a treatment option, which does not require anatomic reduction, allows for immediate postoperative full weightbearing and obviates several complications, which are associated with internal fixation. The major issue is the fixation of the acetabular cup in the fractured bone. Primary cups, reinforcement rings or a combination of arthroplasty and internal fixation may be applied depending on the acetabular fracture type.

The infraacetabular screw versus the antegrade posterior column screw in acetabulum fractures with posterior column involvement: a biomechanical comparison

IntroductionTraditionally, plate osteosynthesis of the anterior column combined with an antegrade posterior column screw is used for fixation of anterior column plus posterior hemitransverse (ACPHT) acetabulum fractures. Replacing the posterior column screw with an infraacetabular screw could improve the straightforwardness of acetabulum surgery, as it can be inserted using less invasive approaches, such as the AIP/Stoppa approach, which is a well-established standard approach. However, the biomechanical stability of a plate osteosynthesis combined with an infraacetabular screw instead of an antegrade posterior column screw is unknown.Material and methodsTwo osteosynthesis constructs were compared in a synthetic hemipelvis model with an ACPHT fracture: Suprapectineal plate + antegrade posterior column screw (APCS group) vs. suprapectineal plate + infraacetabular screw (IAS group). A single-leg stance test protocol with an additional passive muscle force and a cyclic loading of 32,000 cycles with a maximum effective load of 2400 N was applied. Interfragmentary motion and rotation of the three main fracture lines were measured.ResultsAt the posterior hemitransverse fracture line, interfragmentary motion perpendicular to the fracture line (p < 0.001) and shear motion (p < 0.001) and at the high anterior column fracture line, interfragmentary motion longitudinal to the fracture line (p = 0.017) were significantly higher in the IAS group than in the APCS group. On the other hand, interfragmentary motion perpendicular (p = 0.004), longitudinal (p < 0.001) and horizontal to the fracture line (p = 0.004) and shear motion (p < 0.001) were significantly increased at the low anterior column fracture line in the APCS group compared to the IAS group.ConclusionsReplacing the antegrade posterior column screw with an infraacetabular screw is not recommendable as it results in an increased interfragmentary motion, especially at the posterior hemitransverse component of an ACPHT fracture.

Percutaneous osteosynthesis of acetabular fractures with quadrilateral plate involvement using an infra-pectineal plate through a new paramedial approach: Description of the technique using cadaveric specimens

Percutaneous osteosynthesis of acetabular fractures with quadrilateral plate involvement using an infra-pectineal plate through a new paramedial approach using cadaveric specimens. BackgroundIntrapelvic approaches and infrapectineal plates have been used since the mid-nineties to solve Quadrilateral Plate osteosynthesis, with some problems in applying screws in the correct direction and difficulty in fracture reduction. We describe a minimally invasive paramedial approach and new ways to fix infrapectineal plates using one-step osteosynthesis (reduction and fixation). MethodsFour transverse and four posterior hemitransverse acetabular fractures were reproduced using four fresh frozen cadavers. Acetabular osteosynthesis was performed using the paramedial approach. Sequential lasting time and reduction/stability quality were measured using analysis of variance (ANOVA) with Bonferroni Correction as the statistical method, registering iatrogenic injuries. ResultsOsteosynthesis was performed on seven acetabulae using infrapectineal horizontal plates for transverse fractures and vertical plates for posterior hemitransverse fractures. The duration of incision was 3:08 min and osteosynthesis was 55:12 min, with a total of 58:29 min. Median fracture displacement of 13.25 mm turned to a median of 0.01 mm once fracture osteosynthesis was performed with a p = 0.017. The peritoneum was injured twice and good osteosynthesis stability was observed. ConclusionThe paramedial approach is safe with direct access to key anatomical structures for acetabular osteosynthesis. Infrapectineal with reverse fixation plate osteosynthesis provides an excellent reduction rate and good stability once the implants act against displacement forces, making it possible to direct them freely. Further clinical and biomechanical trials are required to confirm our findings. We believe that there was an improvement of up to 60% in the result quality for some cases; however, this technique must be compared with other techniques. Evidence Level IV (Experimental Trial)

Combined pelvic and acetabular injuries: clinical features and treatment strategies of a unique injury pattern

BackgroundTo explore the clinical characteristics of patients with unstable pelvic fractures combined with acetabular fractures and to discuss the treatment strategies for such patients to help guide treatment.MethodsWe retrospectively assessed 24 patients admitted to our hospital from June 2018 to June 2022 with unstable pelvic fractures combined with acetabular fractures, including 15 male patients and 9 female patients with a mean age of 44.8 years. According to the Tile pelvic fracture classification, 15 cases were type B, and 9 cases were type C. The acetabular fractures were classified using the Letournel–Judet classification. There were 8 transverse fractures, 4 transverse and posterior wall fractures, 3 anterior and posterior hemitransverse fractures, 6 both-column fractures, 2 T-shaped fractures and 1 anterior column fracture. We recorded the cause of the patient's injury and vital signs on admission and assessed the patient's treatment strategy and prognosis.ResultsAll patients completed the surgery successfully, and the follow-up ranged from 6 to 42 months, with a mean of 23 months. The healing time for pelvic fractures ranged from 11 to 21 weeks, with a mean of 14.8 weeks, and the postoperative displacement of the posterior pelvic ring ranged from 1.2 to 9.0 mm, with a mean of 3.5 mm. The final clinical outcome at follow-up was evaluated using the Majeed scale: excellent in 11 cases, good in 10 cases and fair in 3 cases; the excellent rate was 87.5%. The time to healing of the acetabular fracture ranged from 13 to 25 weeks, with a mean of 15.9 weeks, and the postoperative displacement of the acetabular fracture ranged from 0.6 to 5.2 mm, with a mean of 1.9 mm. Hip function was assessed at the final follow-up using a modified Merle D’ Aubigné and Postel scale: there were 9 excellent, 11 good and 4 acceptable scores; an excellent rate of 83.3% was achieved.ConclusionPatients with unstable pelvic fractures combined with acetabular fractures suffer severe trauma and complex mechanisms of injury. Treatment needs to be individualized, taking into account the patient's physiological status, fracture classification and degree of displacement.

Preoperative Blood Loss of Isolated Acetabular Fractures.

To quantify preoperative blood loss in isolated acetabular fractures and identify any fracture or patient characteristics associated with increased blood loss or blood transfusion. Retrospective cohort study. Two level 1 trauma centers.Patients/Participants: All patients with operative, isolated acetabular fractures from January 2010 to December 2018. Operative management of an acetabular fracture. Volume of preoperative blood loss and transfusion rates associated with isolated acetabular fracture patterns. A total of 598 patients were included. The mean preoperative blood loss of all fractures was 1,172.6mL. The three fracture patterns with the greatest average preoperative blood loss were associated both column (1,454.9mL), T-type (1,374.8mL), and anterior column posterior hemitransverse fractures (1,317.7mL). Acetabular fracture pattern had a significant association with preoperative blood loss and preoperative transfusion. The timing from injury to surgery and BMI were significantly associated with preoperative blood loss. In conclusion, operatively treated isolated acetabular fractures surprisingly lose an average of greater than one liter of blood in the preoperative setting. Surgeons must carefully assess patient's physiology, ensuring they are adequately resuscitated prior to surgery and remain aware that increasing BMI is associated with increased preoperative blood loss. However, as patients await surgery, unreduced acetabular fractures continue to contribute to ongoing blood loss beyond the first 24 hours from injury. We believe the best hemostasis after initial resuscitation is provided by surgical reduction and fixation, and we recommend continued early surgical intervention to prevent continued bleeding from fracture surfaces. Prognostic Level III. See Instructions for Authors for a complete description of levels of evidence.

Short-term effectiveness of reconstruction plate internal fixation via improved Stoppa approach combined with iliac fossa approach and Kocher-Langenbeck approach for complex acetabular fractures

To investigate the short-term effectiveness of reconstruction plate internal fixation via improved Stoppa approach combined with iliac fossa approach and Kocher-Langenbeck approach for complex acetabular fractures. Between January 2015 and January 2020, 30 patients with complex acetabular fractures were treated with reconstruction plate internal fixation via improved Stoppa approach combined with iliac fossa approach and Kocher-Langenbeck approach. There were 20 males and 10 females with an average age of 52.1 years (range, 25-71 years). The cause of injury included traffic accident in 17 cases and falling from height in 13 cases. Among them, 14 cases were left acetabular fractures and 16 cases were right acetabular fractures. According to Letournel classification, there were 16 cases of double column fractures, 2 cases of transverse fracture with posterior wall fracture, 4 cases of anterior column and posterior hemi-transverse fractures, 8 cases of T-shaped fracture. The displacement distance of fracture ranged from 6 to 30 mm (mean, 11.6 mm). The time from injury to operation was 6-14 days (mean, 8.7 days). The operation time was 2.0-4.5 hours (mean, 3.0 hours). The intraoperative blood loss was 200-800 mL (mean, 450.0 mL). All patients were treated with autologous blood transfusion during operation. All incisions healed by first intention after operation, and no infection occurred. All patients were followed up 12-15 months (mean, 13.4 months). The drainage tube was removed at 2-3 days after operation. After extubation, X-ray film and three-dimensional CT were performed to recheck the fracture reduction. According to Matta score system, 20 cases were excellent, 5 were good, and 5 were poor, the excellent and good rate was 83.3%. All fractures healed with the healing time of 16-25 weeks (mean, 17.7 weeks). According to Merle d'Aubigne-Postel score system, the hip function at 1 year after operation was rated as excellent in 18 cases, good in 6 cases, and fair in 6 cases, and the excellent and good rate was 80.0%. Two cases suffered from sciatic nerve injury due to traction during operation, 7 cases had heterotopic ossification, 2 cases had traumatic hip arthritis, and no other complications occurred. For complex acetabular fractures, the reconstruction plate internal fixation via improved Stoppa approach combined with iliac fossa approach and Kocher-Langenbeck approach can obtain good short-term effectiveness with good reduction and hip joint function, and less complications.

Simultaneous reduction and fixation using an anatomical suprapectineal quadrilateral surface plate through modified Stoppa approach in superomedially displaced acetabular fractures

Treatment of superomedially displaced acetabular fractures including a quadrilateral surface (QLS) is challenging. We present a surgical technique using an anatomical suprapectineal QLS plate through the modified Stoppa approach and report the availability of this plate to treat this fracture type along with the surgical outcomes. Sixteen consecutive patients (14 men and 2 women) who underwent surgical treatment using an anatomical suprapectineal QLS plate through a modified Stoppa approach for superomedially displaced acetabular fractures between June 2018 and June 2020, were enrolled retrospectively. These fractures included 11 both-column fractures and 5 anterior-column and posterior hemitransverse fractures, which were confirmed on preoperative 3-dimensional computed tomography. Surgical outcomes were clinically assessed using the Postel Merle d’Aubigné (PMA) score and visual analog scale (VAS) score at the final follow-up, and radiological evaluations were performed immediately after the operation and at the final follow-up. For comparative analysis, 23 patients who underwent internal fixation with the conventional reconstruction plate through modified ilioinguinal approach between February 2010 and May 2018, were selected. This control group was composed of 18 both-column fractures and 5 anterior-column and posterior hemitransverse fractures. The follow-up period was at least 1 year in all patients. The mean operation time and blood loss was 109 min, and 853 ml, respectively, whereas 236 min, and 1843 ml in control group. Anatomical reduction was achieved in 14 (87.5%) patients, while imperfect reduction was achieved in the remaining 2 patients. At the final follow-up, radiographic grades were excellent, fair, and poor in 14 patients (87.5%), one, and one, respectively. The mean PMA score was 16.1 (range 13–18) and the mean VAS score was 1.0 (range 0–3). No secondary reduction loss or implant loosening was observed. However, 2 patients underwent conversion to total hip arthroplasty (THA) due to post-traumatic arthritis and subsequent joint pain. No other complications were observed. In the comparative analysis, radiological outcome showed a significant relationship with the conversion to THA (p = 0.013). Shorter operation time and less blood loss were significantly observed in the QLS plate fixation group through the modified Stoppa approach compared with the conventional reconstruction plate fixation group through modified ilioinguinal approach (p < 0.001, respectively). Simultaneous reduction and fixation using an anatomical suprapectineal QLS plate through the modified Stoppa approach may be a viable technique in superomedially displaced acetabular fractures along with shorter operation time and less blood loss.

Primary stability of multi-hole cups compared to plate osteosynthesis in osteoporotic anterior column and posterior hemi-transverse acetabular fractures-A biomechanical comparison.

IntroductionAcetabular fractures pose high demands on the surgeon and in the case of osteosynthetic treatment, anatomical reconstruction has the highest priority to achieve a good outcome. However, especially in older patients with poor bone quality, even anatomical reconstruction is no guarantee for a good clinical outcome and may nevertheless end in early osteoarthritis. Primary arthroplasty therefore has an increasing importance in the treatment of these patients. The aim of this study was to biomechanically compare fracture gap displacement and failure load as an assessment measure of the primary stability of conventional plate osteosynthesis with the treatment using a sole multi-hole cup for acetabular fractures.MethodsSix hemi-pelvises each with anterior column and posterior hemi-transverse (ACPHT) fracture were treated with either plate osteosynthesis or a multi-hole cup. The tests were carried out in a standardised test set-up with cyclic loading in various stages between 150 N and 2500 N. The fracture gap displacement was recorded with optical 3D measuring and the failure load was determined after the cyclic measurement.ResultsWith increasing force, the fracture gap displacement increased in both procedures. In each group there was one treatment which failed at the cyclic loading test and a bone fragment was broken out. The primary stability in arthroplasty was comparable to that of the standard osteosynthesis.ConclusionsThe results found seem promising that the primary arthroplasty with a sole multi-hole cup and corresponding screw fixation achieves an initial stability comparable to osteosynthesis for typical ACPHT fractures. However, further clinical studies are needed to prove that the cups heal solidly into the bone.

Clinical Outcomes of the Modified Stoppa Combined with Iliac Fossa Approach for Complex Acetabular Fractures: A Medium- and Long-term Retrospective Study.

ObjectiveThe modified Stoppa combined with iliac fossa approach has gained increasing popularity. Although early clinical outcomes have been satisfactory, extensive long‐term clinical outcomes are relatively scarce. The purpose of this study was to evaluate the medium‐ and long‐term outcomes of this approach for complex acetabular fractures.MethodsThis was a retrospective study involving 57 patients with complex acetabular fractures from January 2009 to January 2016. All fractures were treated with the modified Stoppa combined with iliac fossa approach. Follow‐up was at least 5 years. Primary outcome measures, including quality of reduction and clinical outcomes, were recorded by an independent observer. Secondary outcome measures included time to surgery, surgical time, intraoperative blood loss, and perioperative complications.ResultsFifty‐seven patients (range, 18–80 years) included 46 males and 11 females. There were 32 cases on the left side and 25 cases on the right side. The most common associated injury was pulmonary contusion. According to the Judet–Letournel classification, there were 27 both‐column fractures, 16 anterior column with posterior hemitransverse fractures and 14 T‐type fractures. The average time from injury to surgery was 7.3 days. The average intraoperative blood loss and transfusion were 750.9 ml and 564.3 ml, respectively. All fractures healed within 6 months after surgery. The average follow‐up time was 7.7 years, and there was no loss of follow‐up. The quality of reduction was graded as anatomical in 23 cases (40.4%), imperfect in 22 cases (38.6%), and poor in 12 cases (21.0%). According to grading system of Merle d’ Aubigne and Postel, clinical outcomes at 1 year follow‐up were excellent in 17 cases (29.8%), good in 25 cases (43.9%), fair in four cases (7.0%), and poor in 11 cases (19.3%). The excellent and good rate was 73.7% and the difference was not statistically significant compared with the clinical outcomes at the last follow‐up. Intraoperative complications included four cases of obturator nerve injury and two cases of vascular injury. Postoperative complications included one case of wound delayed healing, two cases of deep vein thrombosis, two cases of avascular necrosis of femoral head, three cases of heterotopic ossification and five cases of post‐traumatic arthritis. Only one of these patients underwent reoperation for femoral head necrosis.ConclusionsThe modified Stoppa combined with iliac fossa approach can achieve satisfactory reduction quality and hip function. It might be a valuable alternative to the ilioinguinal approach for the surgical management of acetabular fractures.

Finite element analysis of the Union Plate in treating elderly acetabular fracture patients

BackgroundElderly acetabular fractures are one of the more difficult types of fractures to resolve. For patients at this age, the more common type of fracture is comminuted. How to better fix this type of fracture has always been an issue of concern. This study was performed to observe the mechanical properties of different internal fixation methods used in treating elderly acetabular fracture patients.MethodsA model of a comminuted acetabular fracture in osteoporosis was established, consisting of an anterior column–posterior hemitransverse fracture with disruption of the quadrilateral surface. Fixation of the acetabular fracture model using a reconstruction plate and Union Plates was simulated. For the different internal fixation methods, static and transient modal analyses were performed under different loads, with an action time of 0.21 s and an analysis time of 0.7 s. The stress of the model was observed in the static analysis, and the displacement of the nodes and the entire model in the U1 direction was observed in the transient modal analysis.ResultsIn the static analysis, the stress of the osteoporosis model, the suprapectineal pelvic reconstruction plate model, the infrapectineal quadrilateral surface buttress plate model, and the suprapectineal quadrilateral surface buttress plate model were 42.62 MPa, 37.49 MPa, 44.39 MPa, and 46.15 MPa, respectively. The stress was mainly distributed near the suprapubic branch. The corresponding displacement in the U1 direction was 0.1500 mm, 0.1020 mm, 0.0836 mm, and 0.0990 mm, respectively. In the transient modal analysis, there was a significant difference in displacement between the different models (P < 0.05). When different loads were applied with the same fixation method, there was no significant difference in model displacement (P > 0.05).ConclusionStatic and transient modal analyses show that the infrapectineal quadrilateral surface buttress plate or the suprapectineal quadrilateral surface buttress plate has an advantage in maintaining the stability of fracture fragments when fixing comminuted acetabular fractures in elderly individuals. The infrapectineal quadrilateral surface buttress plate also presents better biomechanical results.

Role of combined brim and spring plates in the treatment of acetabular fractures involving quadrilateral plates: a retrospective study of early results

Background: Quadrilateral plate (QP) fractures constitute an intrapelvic component of acetabular fractures and are challenging for surgical fixation. Inability to reduce and buttress QP leads to poor functional outcome. The hypothesis was that use of combined brim and spring plates for fixation of fractures that involved QP would maintain reduction and improve functional outcomes of those patients. Methods: This was a retrospective case series study of 44 patients with acetabular fractures that involved QPs that were fixed by combined brim and spring plates between March 2015 and January 2020 in the orthopaedic surgery department in Suez Canal University Hospitals. All patients were operated by the same surgical team. A minimum of 12 mo of postoperative follow-up was planned for each. Statistical analysis was done using SPSS software (version 17 for Windows, Chicago, Illinois). Results: The mean patient age was about 40.4 yr. The associated dislocations were present in ten patients (22.7%). Anterior column and posterior hemitransverse fractures were in about 50% of patients. Average operative time was about 146 min. Average intraoperative blood loss was about 583 mL. No patients developed avascular necrosis of the femoral head, heterotopic ossification, or implant failure. Two patients had postoperative obturator nerve injury. Quadrilateral component reduction was anatomical in 28 hips (63.6%). At 1-year follow-up, final clinical scores were excellent in 15 hips (34.1%) and good in 18 hips (40.9%). Conclusions: Combined brim and spring plates can maintain anatomical reduction of QP fractures and give good clinical results with less operative time and fewer complications than other methods mentioned in the literature. Level of Evidence: Level IV.

The effect of an infra-acetabular screw for anatomically shaped three-dimensional plate or standard plate designs in acetabulum fractures: a biomechanical analysis

BackgroundVarious plate shapes and implant configurations are used for stabilization of acetabulum fractures via anterior approaches. Little is known about the biomechanical stability of a two-dimensionally shaped “conventional” plate (“J-Plate”—JP) in comparison to three-dimensionally shaped plate configurations (3DP). In addition, the augmentary effect of an infra-acetabular lag-screw (IACS) fixation for anterior column and posterior hemi-transverse acetabulum fractures has not been clarified in comparison of JP and 3DP constructs. This study analyzed the difference between the biomechanical stability of JP compared to 3DP and the role of an IACS in a standardized acetabular fracture model in a single-leg stance loading configuration.MethodsIn an artificial bone substitute pelvis model (Synbone© Malans, Switzerland), a typical and standardized fracture pattern (anterior column and posterior hemi-transverse) was created with osteotomy jigs. After anatomic reduction the stabilization was performed using JP or 3DP. Eight pelvises per group were axially loaded in a single-leg stance model up to 400 N. After the load cycle, an additional infra-acetabular screw was placed and the measurement repeated. Fragment displacement was recorded by an optical tracking system (Optitrack Prime 13®, Corvallis, USA).ResultsIn the pure placement, 3DP provided significantly superior stability when compared to JP. Augmentation of JP by IACS increased the stability significantly, up to the level of 3DP alone, whereas augmentation of the 3DP did not result in further increase of overall stability.ConclusionThe anatomically shaped plate alone provides a superior biomechanical stability in fixation of an anterior column and posterior hemi-transverse fracture model. In a JP fixation the augmentation by IACS provides similar strength as the anatomically shaped 3DP. By use of the anatomically shaped 3DP the need of a clinically risky application of IACS might be avoidable.Level of evidenceIV, Experimental study.

Internal fixation of anterior acetabular fractures with a limited pararectus approach and the anatomical plates: preliminary results

BackgroundThe surgical treatment of acetabular fracture has adverse outcomes and high risk, and minimally invasive method is a good way to reduce complications and improve hip joint function. This study is to investigate the treatment of certain acetabular fractures primarily involving the anterior column and quadrilateral plate using a limited pararectus approach and the anatomical plates.MethodsA consecutive cohort of 17 patients with anterior displaced acetabular fractures were managed operatively with a limited approach and the anatomical plates. Ten patients had anterior column fractures, 1 patient had anterior wall fracture, 4 patients had transverse fractures and 2 patients had anterior column with posterior hemi-transverse fractures. The inferior half of the pararectus approach was adopted to open the medial window and to access the anterior column and the quadrilateral plate. The anatomical plates were used for internal fixation. Residual displacements were assessed on the postoperative CT scans using a standardized digital method. The surgical details, hip functional outcomes, and complications were noted.ResultsAll of the patients were operated using the limited pararectus approach and the anatomical plates successfully. The mean operative time and blood loss were 90.9 min and 334.1 ml, respectively. The average postoperative residual gap and step displacement on CT were 2.9 mm and 0.7 mm, respectively. The radiological outcome was estimated according to the Matta score, ten of the cases were graded anatomical, six were graded imperfect, and one was graded poor. Follow up averaged 15 months. Functional outcomes were excellent for nine, good for six, and fair for two. It was noted that one case of peritoneal injury was repaired intraoperatively.ConclusionsThe limited pararectus approach with the advantages of less trauma, direct exposure to the anterior column and quadrilateral plate. The anatomical plates can fit with the surface of the acetabulum, which saves the time of remodeling plates during operation and facilitate fracture reduction. The combination approach can be a good choice for limited surgery of displaced anterior acetabular fractures especially involving the quadrilateral plate.

Single column plate plus other column lag screw fixation vs. both column plate fixation for anterior column with posterior hemitransverse acetabular fractures - a biomechanical analysis using different loading protocols.

Open reduction and internal fixation of both columns is considered the treatment of choice for displaced anterior column with posterior hemitransverse (ACPHT) fractures in non-geriatric patients. Plate fixation of one column combined with lag screw fixation of the other column allows to decrease operative time and approach-related morbidity compared to conventional both column plating. The aim of this biomechanical study was to evaluate whether single column plate plus other column lag screw fixation confers similar stability to both column plate fixation. Physiological loads were simulated using both the single-leg stance (SLS) as well as the sit-to-stand (STS) loading protocols. A clinically relevant ACPHT fracture model was created using fourth-generation composite hemipelves. Fractures were stabilized with three different fixation constructs: (1) anterior column plate plus posterior column screw fixation (AP+PCS), posterior column plate plus anterior column screw fixation (PP+ACS) and anterior column plate plus posterior column plate fixation (AP+PP). Specimens were loaded from 50 to 750N with a ramp of 100N/s. Fracture gap motion (FGM) and relative interfragmentary rotation (RIFR) between the three main fracture fragments were assessed under loads of 750N using an optical 3D measurement system. STS loading generally resulted in higher mean FGM and RIFR than STS loading in the AP+PCS and AP+PP groups, while no significant differences were found in the PP+ACS group. Compared to conventional both column plate fixation (AP+PP), PP+ACS displayed significantly higher FGM and RIFR between the iliac wing and the posterior column during SLS loading. No significant differences in FGM and RIFR were identified between the AP+PCS and the AP+PP group. Overall, single column plate plus other column lag screw fixation conferred similar stability to conventional both column plate fixation. From a clinical point of view, AP+PCS appears to be the most attractive alternative to conventional AP+PP for internal fixation of ACPHT fractures.

The Quadrilateral Plate in Acetabular Fracture Surgery: What Is It and When Should It Be Addressed?

The quadrilateral plate (QP) is the relatively flat surface of bone in the true pelvis lying directly medial to the acetabulum. This surface is frequently involved in acetabular fractures. Elderly individuals, in particular, commonly sustain anterior column fractures with incomplete or complete posterior hemitransverse fracture lines with associated QP comminution. If QP fracture lines propagate through the superior weight-bearing surface of the acetabulum, the femoral head may displace medially, leading to poor outcomes if not addressed. Fortunately, the collective work of many orthopaedic surgeons has resulted in numerous effective methods for approaching, reducing, and stabilizing the QP and the diverse family of fractures which affect it. A thorough understanding of the QP, its anatomy, radiology, and techniques for fixation, is required to optimize patient outcomes.

Treatment of anterior column posterior hemitransverse fracture with supra-ilioinguinal approach.

ObjectiveTo report the feasibility and effect of the supra-ilioinguinal approach for treatment of anterior posterior hemitransverse fracture of the acetabulum.MethodsNineteen consecutive patients who underwent treatment for an anterior column posterior hemitransverse fracture of the acetabulum from January 2013 to June 2018 were retrospectively analyzed. All patients underwent treatment by the single supra-ilioinguinal approach with at least 1 year of follow-up.ResultsThe mean time to surgery, operative time, incision length, and blood loss were 10.2 ± 3.8 days, 157 ± 125 minutes, 10.2 ± 0.6 cm, and 876 ± 234 mL, respectively. According to the Matta scoring system, the reduction quality was excellent in 13 patients, good in 6, and poor in 0. According to the Merle d'Aubigné scoring system, the outcome at the last follow-up was excellent in 12 patients, good in 5, fair in 1, and poor in 1. Postoperative complications occurred in three patients (deep vein thrombosis in one, lateral femoral cutaneous nerve injury in one, and both complications in one).ConclusionsUse of the supra-ilioinguinal approach for treatment of anterior column posterior hemitransverse fracture of the acetabulum produced excellent clinical results because of the direct visualization of the anterior column and quadrilateral plate.

Acetabular fractures: epidemiological, lesional, therapeutic and evolutionary aspects

&lt;p class="abstract"&gt;&lt;strong&gt;Background:&lt;/strong&gt; Fractures of the acetabulum are serious because they affect a deep, load-bearing joint that is difficult to repair surgically at first. They occur in a context of polytrauma. The aim of our work is to study the epidemiological, lesional, therapeutic and evolutionary aspects of acetabulum fractures.&lt;/p&gt;&lt;p class="abstract"&gt;&lt;strong&gt;Methods: &lt;/strong&gt;This is a 5-year retrospective study from January 2012 to December 2016 including 45 patients treated for acetabulum fracture.&lt;/p&gt;&lt;p class="abstract"&gt;&lt;strong&gt;Results: &lt;/strong&gt;45 patients including 38 men and 7 women with a mean age of 36 years (extremes 18 and 74). The circumstances of occurrence were dominated by road traffic accidents with 42 cases (93.3%).&lt;/p&gt;&lt;p class="abstract"&gt;According to the Judet-Letournel classification, we observed 28 elementary fractures (16 posterior wall fractures, 11 posterior column fractures, 1 anterior column fracture) and 17 complex fractures (7 posterior column and posterior wall fractures, 6 transverse and posterior wall fractures, 3 posterior and anterior column fractures, 1 anterior column and posterior hemi-transverse fracture). The association of a dislocation with an acetabulum fracture was found in 32 cases. Associated lesions (fractures) were observed in 23 patients. One case of associated TCE was noted. Treatment was orthopedic in 18 patients, surgical in 18 patients and functional in 9 patients. According to the Matta criteria we obtained after treatment 46.7% good reduction, 51.1% satisfactory and 2.2% unsatisfactory reduction. According to the Postel-Merle D'Aubigné rating, 16 patients obtained excellent results with overall 93.3% satisfactory results. The complications found were coxarthrosis (15 cases), para-articular ossification (2 cases) and vicious callus (1 case).&lt;/p&gt;&lt;p class="abstract"&gt;&lt;strong&gt;Conclusions:&lt;/strong&gt; The treatment of acetabulum fractures depends on the type of fracture, the age and activities of the patients. Orthopedic, surgical as well as functional treatment can give good acetabular reconstructions and functional results.&lt;/p&gt;

Acetabulum fractures in elderly: A systematic review of fracture pattern and treatment

PurposeAcetabulum fractures are being increasingly seen with low impact injuries in elderly patients. This article aimed to study systematically literature on geriatric acetabulum fractures. Objectives of this systematic review were to study (1) demography of patients, common mechanisms of injury and types of fracture patterns commonly seen in elderly patients, (2) treatment used for these fractures in literature and (3) mortality rates in elderly with these fractures. MethodsSystematic search was carried out in May 2020 using predefined search strategy for all studies published in the English language in last 20 years. Literature search and data abstraction was done by two independent reviewers. ResultsAfter screening of all abstracts, a total of 48 studies were included in the systematic review. In total there were 7876 geriatric patients with acetabulum fractures. Mean age of the patients was 72.47 years. There were 4841 males (61.5%). Fall from low heights was the most common mechanism of injury, present in 47.12% patients followed by motor vehicular accidents in 28.73%. Most common fracture pattern was both column fracture, seen in 19.03% patients, followed by anterior column and posterior hemitransverse fracture in 17.23%, anterior column fractures in 17.13%, and posterior wall fractures in 13.46% patients. Out of total 5160 patients for whom details of treatment were available, 2199 (42.62%) were given non-operative treatment, 2285 (44.28%) were treated with ORIF of acetabulum fracture, 161 (3.12%) were treated with percutaneous fixation and 515 (9.98%) were treated with primary THA. Gull sign, femoral head injury and posterior wall comminution were associated with poorer prognosis after ORIF and may form an indication for a primary THA. ConclusionLiterature on treatment of geriatric acetabulum fractures is not enough to draw any definite conclusions. There is limited evidence from current literature that surgery could be considered a safe treatment option for displaced acetabulum fractures in elderly. Primary THA can provide early mobility and reduce chances of resurgery in fracture patterns where restoration of joint surface may not be possible.

Clinico-radiological Outcomes of Using Modified Stoppa Approach for Treating Acetabular Fractures: An Institutional Review.

IntroductionAcetabular fractures are complex intra-articular fractures. The extra-pelvic ilioinguinal (IL) has been the workhorse for the anterior approach and remains the gold standard. The major difference between the IL and the Stoppa approaches is that Stoppa allows for the avoidance of the middle window of the IL approach. Hence, the modified Stoppa approach (MSA) can be adopted by a comparatively less experienced surgeon with minimal complications. The purpose of this study is to evaluate the radiological and functional outcomes of patients operated on using the MSA.Materials and methodsPatients operated on by the MSA for acetabular fractures with a minimum of one year of clinical and radiographic follow-ups were reviewed. CT scans and radiographs were evaluated for the fracture pattern, time to surgery, operative time, blood loss, quality of reduction (Matta criterion), FO [Harris hip score (HHS) and Nach Merle d'Aubigné and Postel score (NMAPS)] and complications (perioperative and follow-up). Twenty-three of 26 patients with 45 acetabular fractures operated between January 2016 and November 2018 were included. Descriptive statistics were used for demographic data, and Pearson’s chi-squared statistic was calculated for the association between radiological and functional outcomes.Results Among the 23 patients, the mean age was 38.5 years (range: 15-65) with a male-to-female ratio of 18:5. The average time to surgery was 11.5 days (range: 2-32), operating time was 155 minutes (range: 90-243), and average blood loss was 650 ml (range: 500-1,250). A supplemental lateral window was used in 20 patients (87%), and three underwent the combined anterior and posterior [Kocher Langenbacks (KL)] approach. All cases were unilateral. The transverse fracture was the most common pattern (eight patients) followed by the associated both-column fracture in six and T-type, isolated anterior column fracture, and anterior column and posterior hemi-transverse fractures seen in three patients each. Iliac blade (high anterior column) fracture was seen in 14 cases and one patient had associated sacral type II fracture. Road traffic accidents accounted for 61% of the injuries and injury severity score (ISS) of >15 (polytrauma) was seen in more than 50% of the cases (associated with other organ injuries). The radiological outcome was anatomical in 52% of the cases, imperfect in 39%, and poor in 9%. The functional outcomes were good to excellent in 74% (HHS) and 79% (NMAPS) of the cases. The association and correlation between them were nonsignificant (p-value: >0.5). Two patients developed a superficial infection and three had iatrogenic obturator nerve palsy. One patient had a direct inguinal hernia, one had grade 3 bedsores, and two patients developed grade 2 arthritic changes during the follow-up. No case of vessel injury was encountered.ConclusionAdoption of the MSA for the treatment of acetabular fractures leads to a good-to-excellent anatomical reduction in most cases while providing direct visualization of the quadrilateral plate and posterior column. The learning curve is smaller for less-experienced surgeons in terms of complications and results. We recommend this technique as a viable alternative to the IL approach for anterior acetabular fixation.