Posterior Facial Height Research Articles

Condylar Remodeling and Skeletal Changes Following Occlusal Splint and Manual Therapy: A Cone Beam Computed Tomography Study in Temporomandibular Disorders.

Background: Temporomandibular disorders (TMD) may be associated with degenerative disease of temporomandibular joint (TMJ), such as condyle erosion and subchondral cysts. Occlusal splint and cranio-mandibular manual therapy, or combined therapy, is recommended as a conservative treatment to alleviate pain-related signs and symptoms in TMD. This study aimed to assess osseous condylar changes and skeletal changes following occlusal splint and cranio-mandibular manual therapy in TMD using cone beam computed tomography (CBCT). Methods: A retrospective cohort study included 24 patients diagnosed with TMD. Combined therapy was performed until pain-related signs and symptoms disappeared. CBCT scans were performed before and after therapy. Osseous structure of condyles and their subsequent modifications were analyzed on CBCT images: flattening, erosion, and subchondral cyst. Sella-Nasion-A point (SNA), Sella-Nasion-B point (SNB), A point-Nasion-B point (ANB), Sella-Articulare-Gonion (Condylar angle), and anterior and posterior facial height (AFH, PFH) were measured on CBCT-generated lateral cephalograms. A paired t-test, Wilcoxon rank-sum test, McNemar test, and Stuart-Maxwell test were used for the statistical analyses. Results: The treatment period with combined therapy was 7.42 ± 3.27 months, and 21 out of 33 TMJ presenting degenerative disease (63.6%) had significant complete remodeling (p < 0.05). Following therapy, SNB significantly decreased from 75.61 ±3.47° to 74.82 ± 3.41° (p = 0.02), ANB significantly increased from 4.05° (3.35-4.9°) to 4.8° (3.3-6.12°) (p < 0.001), AFH significantly increased from 112.85 mm (109.28-118.72) to 115.3 mm (112.58-118.88) (p < 0.001), PFH/AFH significantly decreased from 64.17 (61.39-66.1) to 63 (59.68-64.51) (p = 0.012), and condylar angle significantly increased from 140.84 ± 8.18° to 144.42 ± 8.87° (p = 0.007). Conclusion: Combined therapy promoted significant condylar remodeling in TMJ degenerative disease, along with skeletal changes (mandibular retrusion and increase in facial height). Therapeutic strategies should consider condylar remodeling in TMD. Skeletal and dental parameters should be evaluated prior to occlusal splint therapy.

Prediction on the chin advancement of the twin block functional appliance in growing Chinese patients using the cephalometric markers: a retrospective study.

In spite of the widespread use of functional appliances, broad variations were applied the treatment response. The aim of this study is to investigate the pre-treatment cephalometric predictors on the chin advancement of twin-block in growing Chinese patients with class II malocclusion. After screening, 90 patients treated by twin-block were included in the study. The treatment outcome was assessed by the alterations in the distance of skeletal pogonion (Pog) to the vertical reference plane perpendicular to the Frankfurt plane (ΔPog-VRP). Moreover, ΔPog-VRP was divided by the cranial growth indicated by the Nasion to Basion changes (ΔN-Ba) to minimize the growth discrepancy among individuals (adjΔPog-VRP). Patients with ΔPog-VRP/adjΔPog-VRP above the median value were categorized into good response group (GRG/adjGRG, N = 45), while the rest were poor response group (PRG/adjPRG, N = 45). Independent t-test was used to compare the pre-treatment cephalometric measurements between GRG/adjGRG and PRG/adjPRG. Stepwise multivariate regression models were used to determine the pre-treatment cephalometric predictors for the chin advancement. Generally, there were not any significant differences between GRG/adjGRG and PRG/adjPRG regarding age, gender and cervical stage before twin-block treatment. Patients from GRG had significantly reduced cephalometric measurements in the vertical dimensions, including ∠N-Go-Me, ∠Mandibular plane-Occlusal plane (∠MP-OP) and the sum of angles (p < 0.05) in comparison to PRG. When the individual growth was taken account, similar findings were observed. The patients from adjGRG had a significantly lower ∠Sella Nasion line-MP (∠SN-MP), ∠Ar-Go-Me and ∠N-Go-Me, as well as an increased Posterior facial height (PFH)/Anterior facial height (AFH) (p < 0.05) compared with their counterparts. ∠N-Go-Me variable was the independent predictor on Pog advancement with (β = -0.26, 95% CI: -0.06 to -0.01, p = 0.01) and without (β = -0.29, 95% CI: -0.06 to -0.01, p < 0.01) adjustments on individual growth. The results of this study showed that patients with a reduced N-Go-Me angle are more likely to experience a greater chin advancement following twin-block treatment.

Cephalometric differences in grades II and IV adenoid hypertrophy: A cross-sectional study.

This study aims to determine whether there were cephalometric changes between grades II and IV adenoid hypertrophy. A cross-sectional study was conducted on 120 6-12-year-old patients selected from the ear, nose, and throat department at Imam Al-Hussein Medical City in Karbala. Patients were classified into three groups (each = 40) based on endoscopic findings: control, grade II, and grade IV. The findings were confirmed with cephalometric radiographs. Specific cephalometric points were identified to measure sella-nasion-point A (SNA), sella-nasion-point B (SNB), point A-nasion-point B (ANB), sella-nasion-pogonion (SNPog), sella nasion plane-palatal plane (SNPP), palatal plane-mandibular plane (PPMP), sella nasion plane-mandibular plane (SNMP), saddle, articular, gonial angles, and the y-axis. Additionally, superior-posterior airway space (SPAS), posterior air way space (PAS), mandibular plane-hyoid bone (MP-H), third cervical vertebra-hyoid bone (C3-H), total anterior facial height (TAFH), total posterior facial height (TPFH), upper anterior facial height (UAFH), lower anterior facial height (LAFH), and the Jarabak ratio were measured. Analysis of variance (ANOVA) and Welch tests indicated statistically significant differences (P < 0.05) among the three groups in SNA, SNB, SNPog, PPMP, SNMP, gonial angle, y-axis, SPAS, PAS, MP-H, and the Jarabak ratio. Tukey's honestly significant difference (HSD) and Games-Howell tests indicated a statistically significant difference between grade II and grade IV in SNA, SNMP, y-axis, SPAS, PAS, MP-H, and Jarabak ratio. The present study demonstrated that craniofacial changes start to occur at the moderate adenoid enlargement throughout the downward backward mandibular rotation. More changes would become evident at the severe stage; therefore, an urgent medical intervention and the establishment of nasal breathing by orthodontic treatment with breathing activity would be needed.

Upper airway dimensions and craniofacial morphology: A correlation study using cone beam computed tomography.

To determine the correlation between dentoskeletal parameters related to craniofacial morphology and the upper airway (UA) volume. Cone-beam computed tomography images of 106 randomly selected orthodontic patients were analyzed using NemoFab Ortho software. The dentoskeletal variables assessed were anterior facial height (AFH), posterior facial height (PFH), PFH/AFH ratio, hyoid position, maxillary width (MW), and palatal depth. The UA volume (evaluation in anatomical regions and as a whole) was also assessed using the same software. We also evaluated potential differences in UA variables between age and sex groups. The correlation between the dentoskeletal parameters and UA volume was calculated using the Pearson correlation coefficient (R). Analysis of variance and Student's t test were performed to assess differences between age and sex for UA variables. Statistical analyses were performed using SPSS software (version 26 for Windows). This study found that PFH, AFH, and MW were the dentoskeletal parameters most strongly correlated with UA volume. However, the ANB angle did not show any significant correlation with UA volume. Additionally, differences in UA volumes were observed between age groups. Sex differences were found in both the "8-12" and "≥ 16" age groups for oropharyngeal and pharyngeal volumes. In conclusion, our findings indicate a significant correlation between UA volume and dentoskeletal parameters, particularly those related to facial height and MW.

Three-dimensional analysis of palatal morphology and PAS in patients with cleft lip and palate prior to orthodontic treatment

BackgroundSince many different conclusions of craniofacial anomalies and their relation to the posterior airway space coexist, this comparative clinical study investigated the palatal morphology concerning volumetric size, posterior airway space dimension and the adenoids of patients with and without a cleft before orthodontic treatment.MethodsThree-dimensional intraoral scans and cephalometric radiographs of n = 38 patients were used for data acquisition. The patients were divided into three groups: unilateral cleft lip and palate (n = 15, 4 female, 11 male; mean age 8.57 ± 1.79 years), bilateral cleft lip and palate (n = 8, 0 female, 8 male; mean age 8.46 ± 1.37 years) and non-cleft control (n = 15, 7 female, 8 male; mean age 9.03 ± 1.02 years). The evaluation included established procedures for measurements of the palatal morphology and posterior airway space. Statistics included Shapiro-Wilk-Test and simple ANOVA (Bonferroni) for the three-dimensional intraoral scans and cephalometric radiographs. The level of significance was set at p < 0.05.ResultsThe palatal volume and cephalometric analysis showed differences between the three groups. The palatal volume, the superior posterior face height and the depth of the bony nasopharynx of patients with cleft lip and palate were significantly smaller than for non-cleft control patients. The superior posterior face height of bilateral cleft lip and palate patients was significantly smaller than in unilateral cleft lip and palate patients (BCLP: 35.50 ± 2.08 mm; UCLP: 36.04 ± 2.95 mm; p < 0.001). The percentage of the adenoids in relation to the entire nasopharynx and the angle NL/SN were significantly bigger in patients with cleft lip and palate than in the non-cleft control. In particular, the palatal volume was 32.43% smaller in patients with unilateral cleft lip and palate and 48.69% smaller in patients with bilateral cleft lip and palate compared to the non-cleft control.ConclusionsSkeletal anomalies relate to the dimension of the posterior airway space. There were differences among the subjects with cleft lip and palate and these without a cleft. This study showed that the morphology of the palate and especially transverse deficiency of the maxilla resulting in smaller palatal volume relates to the posterior airway space. Even the adenoids seem to be affected, especially for cleft lip and palate patients.

Effects of rapid maxillary expansion on upper airway parameters in OSA children with maxillary restriction: A CBCT study.

Rapid maxillary expansion (RME) has been proposed as an effective treatment for pediatric obstructive sleep apnea (OSA) and maxillary restriction in children. This study aimed to evaluate the effect of RME appliances on the nasomaxillary complex dimensions in children with OSA and maxillary constriction. This prospective longitudinal study included 34 children aged 8-12 years with maxillary restriction and OSA confirmed by polysomnography who had completed RME therapy. The nasomaxillary complex is segmented into the nasal cavity, maxillary sinuses, and nasopharynx. The effect of RME on nasomaxillary complex dimensions was assessed pre and posttreatment using cone-beam computed tomography, analysis, while a second standard overnight polysomnography (PSG) was performed to assess changes in respiratory parameters. Significant improvements were observed, including inferior maxillary dislocation (S-S1 distance and N-ANS), increased anterior and posterior facial height, and a 5.43 events/h reduction in Apnea-Hypopnea Index (p < .001). The nasal cavity volume increased by 2439 (±584) mm3 (p < .001), nasopharynx size increased by 883 (±479) mm3 (p = .008), mid cross-sectional area increased by 31.74 (±14.50) mm2 (p < .001), and the distance between the right and left maxillary sinuses increased by 8.37 (±3.67) mm (p < .001) all exhibited positive changes, with some insignificant variations in volume change (p = .254). RME treatment was found to be effective in improving nasal cavity and nasopharyngeal dimensions, leading to improved respiratory parameters in children with OSA and maxillary constriction. While these results are promising, considerations about the potential long-term benefits of RME on future growth are important. The study provides valuable insights into the efficacy of RME as a treatment option for this pediatric population.

Assessment of cephalometric parameters and correlation with the severity of the obstructive sleep apnea syndrome.

In individuals diagnosed with obstructive sleep apnea syndrome (OSAS), variations in craniofacial structure have been inconsistently documented, showing differing degrees of alteration between obese and nonobese patients. In addition, sleep disturbance has also been shown to induce disequilibrium in this population of patients. This pilot observational study aimed to assess craniofacial values in obese and nonobese subpopulations of patients with OSAS and their correlation and association with the severity of OSAS. We also assessed whether OSAS patients are characterized by an impaired equilibrium in relation to and associated with the severity of OSAS. We included all consecutive adult patients with OSAS. Through cephalometry, we assessed the upper (UPa-UPp) and lower (LPa-LPp) pharynx diameters, superior anterior facial height (Sor-ANS), anterior facial height (ANS-Me), anterior vertical dimension (Sor-Me), posterior facial height (S-Go) and craniovertebral angle (CVA). Furthermore, we analyzed postural equilibrium through a stabilometric examination. Forty consecutive OSAS patients (45% female with a mean age of 56 ± 8.2years) were included. The subgroup of nonobese patients had a reduced UPa-UPp (p = 0.02). Cephalometric measurements were correlated with the severity of OSAS in nonobese patients, whereas only Sor-ANS was correlated with the severity of OSAS in the obese subpopulation. In the overall population, altered craniofacial values are associated with severe OSAS. Although there are differences in equilibrium between obese and nonobese OSAS patients, the stabilometric measurements were not correlated or associated with OSAS severity. Altered craniofacial values and compromised equilibrium in OSAS patients are linked to OSAS severity. Therefore, the management of OSAS should be tailored not only to weight management but also to craniofacial and postural rehabilitation to enhance patient outcomes.

Comparison of PAS and adenoids in patients with and without maxillary micrognathia before orthodontic treatment

ObjectiveCraniofacial anomalies are widely discussed as predisposing factors of breathing disorders. Since many more cofactors exist, this study investigated the association between maxillary micrognathia and morphological changes of posterior airway space and adenoids in these patients.Material and methodsCephalometric radiographs of n = 73 patients were used for data acquisition. The patients were divided into two groups according to certain skeletal characteristics: maxillary micrognathia (n = 34, 16 female, 18 male; mean age 10.55 ± 3.03 years; defined by a SNA angle < 79°) and maxillary eugnathia (n = 39, 19 female, 20 male; mean age 10.93 ± 3.26 years; defined by a SNA angle > 79°). The evaluation included established procedures for measurements of the maxilla, posterior airway space and adenoids. Statistics included Kolmogorov–Smirnov-, T- and Mann–Whitney-U-Tests for the radiographs. The level of significance was set at p < 0.05.ResultsThe cephalometric analysis showed differences in the superior posterior face height and the depth of the posterior airway space at palatal level among the two groups. The depth of the posterior airway space at mandibular level was the same for both groups, just as the size of the area taken by adenoids in the nasopharynx.ConclusionsSkeletal anomalies affect the dimension of the posterior airway space. There were differences among the subjects with maxillary micrognathia and these with a normal maxilla. However, the maxilla was only assessed in the sagittal direction, not in the transverse. This study showed that the morphology of the maxilla relates to the posterior airway space whereas the adenoids seem not to be affected.Clinical relevanceMaxillary micrognathia is significantly associated with a smaller depth of the posterior airway space at the palatal level compared to patients with maxillary eugnathia.

Evaluation of the skeletal and dental effects of a hybrid aesthetic functional appliance (HAF) in skeletal class II division 1 malocclusion: A prospective uncontrolled clinical trial.

The present study investigated the skeletal and dental effect in class II division I growing patients due to mandibular deficiency treated with the hybrid aesthetic functional (HAF) appliance. A sample of 16 growing patients (5 boys and 11 girls; mean age: 9.50 years, standard deviation: 1.15) with class II division I malocclusion were treated using the HAF appliance for an average period of 10±3 months. For each patient, a cephalometric radiograph was taken before and after treatment, and digital analysis was applied using the WebCeph program. The statistical analysis was performed to evaluate dental and skeletal changes associated with the HAF appliance and determine if there were any statistically significant variations in anatomical measurements between the start and completion of the treatment. The data showed a significant increase in SNB angle (P=0.002), leading to a significant decrease in ANB angle (P=0.001). The mandibular length significantly increased (P=0.008), the lower incisors were flared significantly (P=0.028), and the lower molars were extruded significantly (P≤0.001). Also, this study revealed a significant decrease in Wits appraisal (P≤0.001), overjet (P≤0.001), and overbite (P=0.041). Additionally, a significant increase in lower anterior facial height (P≤0.001), total facial height (P=0.001), and posterior facial height (P=0.037) were observed. The HAF appliance showed that it could be used to correct class II division 1 skeletal discrepancy by mandibular advancement. The HAF appliance increased all facial heights significantly.

Comparison of Twin Block appliance and Herbst appliance in the treatment of Class II malocclusion among children: a meta-analysis

BackgroundOur meta-analysis aimed to evaluate the efficacy of applying Herbst and Twin Block appliances in the treatment of Class II malocclusion among children.MethodsDatabases, including PubMed, Embase, Cochrane Library, Web of Science, China National Knowledge Infrastructure (CNKI), China VIP Database (VIP), and Wanfang were thoroughly searched from inception to August 9, 2023. The outcomes included skeletal, dental, and soft tissue changes. The weighted mean difference (WMD) was used as the effect indicator, and the effect size was expressed with a 95% confidence interval (CI). The heterogeneity of each outcome effect size was tested, and the heterogeneity statistic I2 ≥ 50% was analyzed by the random-effect model, otherwise, the fixed-effect model was conducted. Sensitivity analysis was performed.ResultsA total of 12 studies involving 574 patients were included in this meta-analysis. Herbst appliance had a statistically significant increase in mandibular body length (WMD: 1.44, 95% CI: 0.93 to 1.96, P < 0.001) compared with the Twin Block appliance. More increases in angle and distance of L1 to mandibular plane (MP) were found in the Herbst appliance compared with the Twin Block appliance. Significant and greater improvements in molar relationship (WMD: 0.79, 95% CI: 0.28 to 1.29, P = 0.002), posterior facial height (WMD: -1.23, 95% CI: -2.08 to -0.38, P = 0.005), convexity angle (WMD: -1.89, 95% CI: -3.12 to -0.66, P = 0.003), and Sella-Nasion plane angle (U1 to SN) (WMD: 3.34, 95% CI: 2.25 to 4.43, P < 0.001) were achieved in the Twin Block appliance. Herbst and Twin Block appliances produced similar effects in the skeletal and dentoalveolar changes including Sella-Nasion-point A (SNA), Sella-Nasion-point B, point A-Nasion-point B (ANB), overjet, and overbite.ConclusionAs the findings revealed both Herbst and Twin Block appliances contributed successfully to the correction of Class II malocclusion. Compared with the Twin Block appliance, the Herbst appliance may have more advantages in mandibular bone movement. Twin Block therapy resulted in more improvement in the aesthetics of the face.

Relation Between Masticatory Performance and Skeletal Properties in Patients With Skeletal Class III Malocclusion.

This study aimed to measure masticatory performance (MP) using β-carotene gummy jelly to investigate its relationship with skeletal properties in decompensated patients diagnosed with skeletal class III malocclusion. The study included 78 patients (38 men and 40 women) diagnosed with skeletal class III malocclusion without temporomandibular joint disorder and periodontal disease. MP was measured using a new masticatory measuring device and β-carotene in the gummy jelly. Lateral and posteroanterior cephalograms were obtained, and skeletal properties (Me deviation, ANB, SNB, APDI, Wits, ODI, facial axis, body length, ramus length, SN-GoGn, anterior facial height, posterior facial height, saddle angle, articular angle, and gonial angle) were evaluated. MP differences according to age and sex and the effect of skeletal properties on MP were analyzed using multiple linear regression analysis. The MP of all patients was 3690.55±1428.77mm², MP of the male group was 4043.05±1498.09mm², and MP of the female group was 3355.68±1272.19mm². Among the items investigated, the variable that affected MP was posterior facial height. Posterior facial height showed a positive correlation (P=0.022). There was no significant difference between MP and other skeletal properties (P>0.05). The severity of the hypodivergency in skeletal class III could affect MP. The relationship between facial asymmetry or skeletal relation and MP could not be explained in this study.

An evaluation of cephalometric predictors of anterior open bite; An assessment of dental and skeletal parameters in an orthodontic population.

Anterior open bite (AOB) malocclusion is one of the highly challenging malocclusions. Cephalometric radiographs have been used for the diagnosis of occlusal anomalies in the vertical and anteroposterior directions. This study aims to compare skeletal and dental features in open and non-open bite subjects to identify factors that help predict and categorize open bites in a Nigerian population. Pretreatment cephalometric radiographs of 82 patients were recruited into this study. This study comprised 41 AOB patients and 41 (Class 1 malocclusion) patients (control group). The radiographs were obtained from the orthodontic unit, Department of Child Dental Health of the Lagos University Teaching Hospital, Idi-Araba Lagos. Cephalometric tracing and analysis of the obtained radiographs were used to identify and compare the skeletal and dental differences between the two groups. The mean age of the participants was 20.47 ± 8.05 years. The patients consisted of 26 (31.7%) males and 56 (68.3%) females. There was a significant difference in the open bite depth indicator (ODI) of the open bite (P value < 0.001). There was a statistically significant increase in the vertical skeletal parameters - lower facial height (LFH), total facial height (TFH), posterior facial height (PFH), Frankfort-mandibular plane angle (FMA), mandibular-maxillary angle (MMA), and gonial angle in the AOB group compared to the control group. The vertical height of the dentoalveolar segments measured was all significantly increased in the open bite group compared to the control group. The results suggest that the skeletal and dental vertical parameters, including ODI of the open bite subjects, varied compared with the non-open bite subjects in the Nigerian population studied and could be used to predict AOB tendency.

Sex differences in craniofacial parameters of children and adolescents: a comparative study with the maturation of cervical vertebrae using a cephalometric method.

This study aimed to investigate sex differences in craniomaxillofacial parameters in children and adolescents. Lateral cephalograms were obtained from 340 subjects (141 male, 199 female) aged 6 to 18 years, and their craniofacial characteristics and cervical vertebral maturity were assessed using the quantitative cervical vertebral maturity (QCVM) method. Age-based stratified analyses on craniofacial parameters and further comparison in QCVM Ⅲ subjects were performed. Among all analyses, male subjects had significantly greater value than females in sex-different parameters except for facial convexity. The overall group had 17 sex-different parameters (ramus height, anterior facial height (AFH), posterior facial height (PFH), upper anterior facial height (UAFH), lower anterior facial height (LAFH), anterior cranial base length, posterior cranial base length, facial convexity, upper lip length, upper lip thickness, lower lip thickness, soft tissue chin thickness, nasion of soft tissue-subnasale (N'-Sn), subnasale-menton of soft tissue (Sn-Me'), subnasale-stomion inferius (Sn-Sto)). The <12 years old group showed 6 significant sex differences (AFH, LAFH, lower lip protrusion, lower lip thickness, N'-Sn, Sn-Me'). While the ≥12 years old group occurred two more parameters (mandibular body length, AFH/PFH) than the overall group. 12 cephalometric parameters had significant sex differences among QCMV III patients. After age adjustment, the number of sex-different parameters only increased in soft tissue. Craniofacial characteristics and cervical vertebrae maturation of the youngsters exhibited significant sex differences. Though females reached an earlier cervical vertebral maturation, they still had smaller craniofacial linear features. Sex differences should be taken into account in developing reference standards for cephalometric measurements and treatment planning in the clinic.

Outcome differences after orthodontic camouflage treatment in hypo- and hyperdivergent patients – A retrospective cephalometric investigation

ObjectivesTo compare differences in outcome in skeletal and dental parameters in hypo- and hyperdivergent Class II patients after extraction of upper first premolars and comprehensive orthodontic treatment.Materials and methods37 Class-II-patients with dental camouflage treatment were divided into a hypo- (n = 18) or a hyperdivergent (n = 19) group depending on the mandibular plane angle (hypo: < 34° or hyper: ≥ 34°). Lateral cephalograms were available before (T1) and after (T2) treatment and were analyzed with customized measurements. Data from a growth survey served as a control and were used to calculate the actual treatment effect. Data were analyzed by one-sample Student’s t-tests and independent Student’s t-tests. Statistical significance was set at p < 0.05.ResultsThe measurements showed similar changes in both groups. The effects were mainly dentoalveolar. Hypodivergent patients showed an almost equal increase in anterior and posterior facial height, while hyperdivergent patients only showed an increase in anterior facial height.ConclusionsIn hyperdivergent patients, the anterior facial height increases despite camouflage treatment. This indicates a tendency towards bite opening and backward rotation of the mandible. Hypodivergent patients do not experience deepening of the bite.Clinical relevanceIn hyperdivergent patients with upper first premolars extraction the anterior facial height increased differently than in hypodivergent patients. This should be considered if a bite opening is a possible contraindication to treatment.

Correlation Between Horizontal and Vertical Skeletal Components in Dental Malocclusions Among the Jazan Population.

The dentoskeletal morphology of various malocclusions has been analyzed in cephalometric studies. It is important to understand the vertical and horizontal components of orthodontic treatment. To provide accurate treatment, an orthodontist needs to understand the facial types of an individual. This study aims to evaluate a correlation between vertical and horizontal components of skeletal and dental malocclusion by assessing cephalometric radiographs of the population of Jazan province. The cephalometric radiographs of 267 eligible participants were assessed digitally. Fourteen skeletal and dental parameters were used to evaluate the association. Reliability was checked with the intra-class coefficient. Statistical analyses included descriptive statistics and Spearman's rho test. Statistical significance was set at P ≤ 0.05. Correlations were found between anterior facial height (AFH), posterior facial height (PFH), FH ratio (Jarabak ratio), upper incisor to NA (U1-NA), lower incisor to NB (L1-NB), and upper incisor to the palatal plane (U1/PP). In dental class I, AFH (N-Me) had a strong positive correlation with L1-NB (0.300), U1/PP (0.164), and L1/MP (0.215). In dental class II, AFH negatively correlated with U1-NA (-0.735) and positively correlated with L1-NB (0.292), L1/MP (0.085), and U1-NA. PFH (S-Go) positively correlated with L1-NB (0.525) in class I but negatively correlated in class II. However, a negative relationwas observed between all the vertical and horizontal components in class III. This study suggests potential associations between vertical and horizontal components in developing skeletal and dental discrepancies.

Vertical effects of cervical headgear in growing patients with Class II malocclusion: a systematic review and meta-analysis.

Cervical headgear (cHG) has been shown to be effective in Class II correction both with dental and orthopaedic effects but has traditionally been associated with vertical adverse effects in terms of posterior mandibular rotation. To assess the treatment effects of cHG treatment in the vertical dimension. Unrestricted literature search of five databases up to May 2023. Randomized/non-randomized clinical studies comparing cHG to untreated controls, high-pull headgear (hp-HG), cHG adjuncts, or other Class II treatment alternatives (functional appliances or distalisers). After duplicate study selection, data extraction, and risk-of-bias assessment according to Cochrane, random-effects meta-analyses of mean differences (MD)/standardized mean diffences (SMD) and their 95% confidence intervals (CIs) were performed, followed by meta-regressions, sensitivity analyses, and assessment of certainty on existed evidence. Two randomized/16 non-randomized studies (12 retrospective/4 prospective) involving 1094 patients (mean age 10.9 years and 46% male) were included. Compared to natural growth, cHG treatment was not associated on average with increases in mandibular (eight studies; SMD 0.22; 95% CI -0.06, 0.49; P = 0.11) or maxillary plane angle (seven studies; SMD 0.81; 95% CI -0.34, 1.95; P=0.14). Observed changes translate to MDs of 0.48° (95% CI -0.13, 1.07°) and 1.22° (95% CI -0.51, 2.94°) in the SN-ML and SN-NL angles, respectively. No significant differences were seen in y-axis, facial axis angle, or posterior face height (P > 0.05). Similarly, no significant differences were found between cHG treatment and (i) addition of a lower utility arch, (ii) hp-HG treatment, and (iii) removable functional appliance treatment (P > 0.05 for all). Meta-regressions of patient age, sex, or duration and sensitivity analyses showed relative robustness, while our confidence in these estimates was low to very low due to the risk of bias, inconsistency, and imprecision. cHG on average is not consistently associated with posterior rotation of the jaws or a consistent increase in vertical facial dimensions among Class II patients. PROSPERO registration (CRD42022374603).

Short- and Long-Term Prediction of the Post-Pubertal Mandibular Length and Y-Axis in Females Utilizing Machine Learning.

The aim of this study was to create a novel machine learning (ML) algorithm for predicting the post-pubertal mandibular length and Y-axis in females. Cephalometric data from 176 females with Angle Class I occlusion were used to train and test seven ML algorithms. For all ML methods tested, the mean absolute errors (MAEs) for the 2-year prediction ranged from 2.78 to 5.40 mm and 0.88 to 1.48 degrees, respectively. For the 4-year prediction, MAEs of mandibular length and Y-axis ranged from 3.21 to 4.00 mm and 1.19 to 5.12 degrees, respectively. The most predictive factors for post-pubertal mandibular length were mandibular length at previous timepoints, age, sagittal positions of the maxillary and mandibular skeletal bases, mandibular plane angle, and anterior and posterior face heights. The most predictive factors for post-pubertal Y-axis were Y-axis at previous timepoints, mandibular plane angle, and sagittal positions of the maxillary and mandibular skeletal bases. ML methods were identified as capable of predicting mandibular length within 3 mm and Y-axis within 1 degree. Compared to each other, all of the ML algorithms were similarly accurate, with the exception of multilayer perceptron regressor.

Anthropometric and Cephalometric Facial Characteristics of Adult Saudi Patients with Skeletal Class III Malocclusions

Abstract Objectives: We aimed to assess adult Saudi patients’ facial anthropometry and cephalometric characteristics with skeletal Class III malocclusions compared to Class I malocclusion patients. Materials and Methods: Our cross-sectional study included a review of the orthodontic records of 108 patients: 54 patients with skeletal Class III malocclusions and 54 patients with skeletal Class I malocclusions, equally distributed between males and females. Using anthropometric landmarks, seven angular and eight linear measurements were recorded and compared between Class III and Class I patients. In addition, we compared three horizontal facial proportions and three horizontal neoclassical canons between the two groups. Finally, we used Student’s t-tests to compare continuous variables and Chi-square tests for categorical variables. Results: Class III patients had significantly larger mandibular length, mandibular plane angle, mid- and lower-anterior face height, and posterior face height (P &lt; 0.05) compared to Class I patients. Class III patients had significantly proclined upper incisors, retroclined lower incisors, and an obtuse interincisal angle (P &lt; 0.05). The mouth: nose ratio differed significantly between skeletal Class III and I patients (P = 0.008). The orbital canon was valid in 14.8% of Class I and 9.3% of Class III patients, respectively. The orbitonasal proportion applied only to 31.5% and 20.4% of Class I and III patients, respectively. The naso-oral canon occurred in 18.5% and 1.9% of Class I and III patients, respectively. Conclusion: Saudis with Class III skeletal profiles have some distinctive Class III characteristics not observed in most other ethnic groups. The established horizontal facial proportions, neoclassical facial canons, and Class III skeletal profile did not apply to Saudis with skeletal Class I malocclusions, indicating that these proportions and characteristics may not be suitable as references when planning the surgical treatment for these patients.

Enlarged occipital spur and craniofacial morphology: a cephalometric analysis.

This cross-sectional study aimed to investigate the association between the occipital spur length and craniofacial morphology in individuals with occipital spur (OS). The study included cephalometric images from 451 individuals (196 females, 255 males, age range was 9-84years). The spur length and craniofacial characteristics were evaluated using cephalograms. Based on spur length, subjects were divided into two groups: the OS group (N = 209) and the enlarged occipital spur (EOS) group (N = 242). Descriptive statistics, Independent T-test, Mann-Whitney U test, chi-square test, Kruskal-Wallis test, and age- and sex-based stratified analyses were performed. The level of significance was set at p < 0.05. Males had significantly larger spur length than females. Spur length was shorter in individuals under 18 than the groups over 18. After adjusting for gender and age, ramus height, mandibular body length, effective length of maxilla, effective length of mandible, anterior cranial base length, posterior cranial base length, anterior facial height, posterior facial height, facial height index, and lower anterior facial height had statistically significant differences between OS group and EOS group. Males exhibit greater spur length than females. Patients under 18 had a shorter spur length than adults. Linear craniofacial measurements were found to be greater in subjects with EOS than the individuals with OS. The craniofacial growth and development of an individual might be associated with EOS. The causal relationship between EOS and craniofacial development requires further longitudinal studies.

Imaging study on the relationship between anterior and posterior occlusal planes and temporomandibular osteoarthrosis.

The aim of this study was to compare the anterior and posterior occlusal plane characteristics of patients with different temporomandibular joint osseous statuses. A total of 306 patients with initial cone beam CT (CBCT) and cephalograms were included. They were divided into three groups on the basis of their temporomandibular joint osseous status: bilateral normal (BN) group, indeterminate for osteoarthrosis (I) group, and osteoarthrosis (OA) group. The anterior and posterior occlusal planes (AOP and POP) of the different groups were compared. Then, the regression equation was established after adjusting for confounding factors, and a correlation analysis between the occlusion planes and other parameters was performed. SNA, SNB, FMA, SN-MP, Ar-Go, and S-Go were correlated with the occlusal planes. Relative to the BN and I groups, the FH-OP of the OA group increased by 1.67° on the average, FH-POP increased by 1.42° on the average, and FH-AOP increased by 2.05° on the average. The occlusal planes were steeper in the patients with temporomandibular osteoarthrosis than in the patients without it, and the mandible rotated downward and backward. The height of the mandibular ramus, the mandibular body length, and the posterior face height were small. In clinical practice, attention should be given to the potential risk of temporomandibular joint osteoarthrosis in such patients. In addition, SNB, FMA, SN-MP, Ar-Go, S-Go, and occlusal planes had moderate correlations.