Portable Pressure Research Articles

A new portable negative pressure wound therapy device: a prospective study investigating clinical outcomes.

Closed surgical incision sites at high risk of complications, and with exudate or leakage, are increasingly being managed with closed incision negative pressure wound therapy (ciNPWT) to reduce tissue stress and increase the force necessary to disrupt the incision. This study was undertaken to investigate the performance and safety of a canister-based, single-use NPWT (suNPWT) system when used on closed surgical incision sites. The investigation was designed as a prospective, open, non-comparative, multicentre study aimed at confirming the safety and performance attributes of the suNPWT system when applied to low-to-moderately exuding closed surgical incisions. The primary performance measure was the wound remaining closed from baseline to the last follow-up visit on day 14. Secondary performance measures included: wound and periwound condition; wear time of the system; product consumption; adherence to therapy; and patients' pain progress. Details of adverse events were also collected. Some 35 patients were recruited. The closed surgical incisions responded well to treatment with the tested suNPWT system. All wounds remained closed throughout the investigation. Consistent with other studies of ciNPWT reporting low infection rates, the current study observed either no or low exudation in 90.4% of wounds at the final visit, together with absence of surgical site infection. Pain severity levels were low, both at dressing change and during delivery of negative pressure. No serious adverse device events were reported. In this study, the suNPWT system supported the healing of closed surgical incisions with no safety concerns relating to its use.

Dyspnea, respiratory muscle strength, cough capacity, and sleep quality in individuals with substance use disorder

There is evidence that substance use and smoking cause some adverse effects on the respiratory system. The aim of this study was to assess dyspnea severity, respiratory muscle strength, cough capacity, and sleep quality in people with substance use disorder (SUD). Forty eight individuals with SUD and 28 active cigarette smokers participated in the study. Participants’ dyspnea severity was assessed using the Modified Medical Research Council Scale, respiratory muscle strength was measured with a portable electronic mouth pressure device, peak cough flow was assessed with a Peak Flow Meter, and sleep quality was determined using the Pittsburgh Sleep Quality Index (PSQI). The amount of daily cigarette smoking and dyspnea severity were significantly higher in individuals with SUD (p < .001). Peak cough flow values, maximum inspiratory pressure (MIP), maximum expiratory pressure (MEP), MIP (%predicted), and MEP (%predicted) were not significantly different between the SUD patients and the active cigarette smokers (p > .05). However, PSQI sub-parameters such as subjective sleep quality, sleep latency, habitual sleep efficiency, use of sleeping medication, and total scores showed significant differences between the SUD patients and the active cigarette smokers (p < .05, p < .001, p = .03, p < .001, p < .001, respectively). Individuals with SUD were found to have higher dyspnea and poorer sleep quality than active smokers. However, respiratory muscle strength and cough capacities were similar.

Evaluation of Proximal Contact Tightness and Contact Area of Posterior Composite Resin Restorations

The purpose of this study is to evaluate the influence of the matrix system on proximal contact tightness (PCT) of posterior composite resin restorations. Standardized class II cavities on 180 first lower molar dentiform model teeth (Frasaco GmbH, Tettnang, Germany) were prepared. Three groups were formed considering the matrix system: Group-IM: Ivory matrix (Hahnenkratt GmbH, Königsbach-Stein, Germany), Group-OM: Omni matrix (Ultradent, South Jordan, UT, USA), and Group-PM: Palodent V3 sectional matrix (Dentsply, Charlotte, NC, USA). Teeth were restored with resin composite mounted in a manikin head to simulate the clinical environment. Proximal contact tightness (PCT) was measured using a custom-made portable dental pressure meter (PDPM), and the validation of the PCT results was performed with a histogram analysis acquired from bite-wing radiography. All data were statistically analyzed by ANOVA and t-test in SPSS software (v.27.0) (p &lt; 0.05). PM group showed statistically tighter contacts on both mesial (PCTm: 228.28 ± 59.17 N) and distal surfaces (PCTd: 254.91 ± 65.69 N) (p &gt; 0.05). Mesial contacts were found to be significantly tighter than distal contacts among all (p &lt; 0.05). According to the histogram results, only in the PM group, the difference between the mesial and distal areas is significant (p &lt; 0.05). Histogram results confirmed that the tightest contact values were achieved in the PM group, followed by the OM and IM groups, respectively (p &lt; 0.05). The use of sectional matrix systems and separation rings is more effective in creating tighter contact than conventional matrix systems. The use of anatomical wedges will help to create a more natural approximal contour and narrow contact area.

Bottle-in-bottle reaction device: Portable gas pressure meter for rapid and on-site analysis of oxalate in spinach and tea beverages

A gas pressure meter-based portable/miniaturized analytical kit was established for rapid and on-site detection of oxalate. Potassium permanganate (KMnO4) and oxalate solution were mixed together in bottle-in-bottle reaction device, a simple oxidation reaction process occurred within 6 min and carbon dioxide (CO2) was generated, inducing the pressure of the sealed bottle changed, which was measured by a portable gas pressure meter. A detectable range of 0.1–6 μmol mL−1 and a detection limit of 0.064 μmol mL−1 were achieved. The proposed analytical method was further used for the analysis of several real samples (spinach, beverages and water samples), with the recoveries of 89–111%. Considering the interferences from the complicated matrix, calcium chloride (CaCl2) was served as a precipitant, oxalate (C2O42−) was precipitated with Ca2+ to form precipitation (CaC2O4), CaC2O4 was then separated from the matrix by centrifuge/filter, eliminating the interferences. It is a rapid, easy-used and interference-free analytical system/device for oxalate on-site and real time analysis.

Implications of plantar static pressure distribution among bilateral flatfoot patients: An analytical case-control research

BackgroundAdult pes planus is a highly prevalent condition characterized by the gradual or sudden appearance of fallen arches in adulthood, which is a recognized cause of difficulty with balance and stability, discomfort, pain, swelling, tired and achy feet and impairment. Accordingly, the main purpose of this analytical, case-control study was to evaluate the characteristics in foot morphology related to static plantar pressure distribution in adults with and without a bilateral condition. MethodsSixty-eight subjects were recruited by a laboratory in this analytical case-control study, involving thirty-four adults with a bilateral condition and thirty-four healthy controls. Static plantar pressure was measured in all participants using a specific portable pressure platform with multiple resistive sensors which was placed on the floor. ResultsStatic plantar pressure distribution in the cases group showed significant increases in the right and left surface areas, in the right heel surface area and also in the left foot mean peak pressure (p < 0.001), as well as in the left heel surface area (p = 0.003). ConclusionsAdults with bilateral flatfoot showed changes in the surface areas in both feet and recorded higher levels in static plantar pressures with respect to the control group, a feature which can be associated with this common bilateral condition.

Reliability of Spatiotemporal Characteristics During Single-Legged Hop and Bilateral Drop Jump Tasks Using an Instrumented Pressure Walkway.

Single-legged hop tests have been widely used to assess performance-based outcomes after anterior cruciate ligament (ACL) reconstruction. Traditional single, triple, or 6-meter (6m) timed hop tests only measure distance or time as the principal variables, neglecting other variables, such as individual hop distances within a series of hops, flight time, and stance time. The development of portable instrumented pressure walkways has made it possible to collect parameters such as hop velocity, flight time, stance time, distance, and pressure outside of a laboratory setting. However, the reliability of instrumented pressure walkways in measuring spatial and temporal variables during single-legged hop tests is unknown. This study aimed to determine if the Zeno walkway can reliably measure spatiotemporal (ST) characteristics of hop tests. Cross-Sectional Study. Individuals (n=38) in this cross-sectional study performed single, triple, and 6m hop tests on a pressure-sensitive Zeno walkway. Twenty-one participants completed follow-up testing between one and 14 days later. Intraclass correlation coefficients (ICC(3,k)) were used to assess test-retest reliability of ST variables. The accuracy of vertical jump height and 6m hop timing were also measured. All ST variables demonstrated excellent test-retest reliability (ICC > 0.86) with small minimal detectable change (MDC) values during single-legged hop tests. Six-meter hop time and jump height during a bilateral drop jump were also accurately measured by the walkway. An instrumented pressure walkway is a novel tool to reliably assess non-traditional parameters of clinically relevant hop and jump tests such as flight time, stance time, and jump height after lower extremity injury, surgery, and rehabilitation. 3b.

Upper extremity contact pressure measurement in robot-assisted pelvic surgery

Upper extremity complications are often a problem in robot-assisted pelvic surgery (RAPS) with the lithotomy-Trendelenburg position (LT-position). This study focused on upper extremity contact pressure (UEP) and examined the relationship between UEP and upper extremity complications. From May 2020 to April 2022 at the University of Tokyo Hospital, UEP was measured in 155 patients undergoing RARP and 20 patients undergoing RARC. A total of 350 sets of UEP were investigated in this study. UEP was measured using a portable interface pressure sensor (Palm Q, Cape CO., Kanagawa, Japan) in the preoperative lithotripsy position (L-position), preoperative LT-position, and postoperative L-position. UEP was increased in the preoperative LT-position than in the preoperative L-position (right side 5.2 mmHg vs. 17.1 mmHg, left side 5.3 mmHg vs. 17.1 mmHg, P < 0.001, respectively), and was decreased in the postoperative L-position than in preoperative LT-position (right side 17.1 mmHg vs. 10.8 mmHg, left side 17.1 mmHg vs. 10.6 mmHg, P < 0.001, respectively). Eleven upper extremities developed shoulder pain. UEP of the preoperative LT-position tended to be higher in the upper extremity exhibiting shoulder pain (25.6 mmHg (15.4–30.3) vs. 17.1 mmHg (12.0–24.4) P = 0.0901). UEP measurements may help prevent postoperative shoulder pain.

On-site monitoring of nandrolone in cattle farming samples by portable atmospheric pressure chemical ionization mass spectrometry with ambient sampling

Nandrolone (NT) is a type of androgen anabolic steroid that is often illegally used in cattle farming, leading to unpredictable harm to human health via the food chain. In this study, a rapid detection method for NT in the samples of cattle farming was established using a portable mass spectrometer. The instrument parameters were optimized, including a thermal desorption temperature of 220 °C, a pump speed of 30 %, an APCI ionization voltage of 3900 v, and an injection volume of 6 μL. The samples of bovine urine, feed, sewage, and tissue were selected, and extracted using a solution of methanol:acetonitrile (1:1, v/v), followed by spiking a NT standard solution (1000 ng·mL−1) and ionization through the APCI ion source for detection. The results showed that NT could not be detected in beef and feed due to the complexity of the matrix, while clear signals of NT ions were observed in bovine urine and sewage samples, with LODs of 1000 and 100 ng·mL−1, respectively. Furthermore, quantitative analysis was attempted, and a good linear relationship (R2 = 0.9952) was observed for NT in sewage within the range of 100 to 1000 ng·mL−1. At spiked levels of 100, 500, 1000 and 2000 ng mL−1, the recovery rates ranged from 74.3 % to 92.8 %, with a relative standard deviation (n = 6) of less than 15 %. In conclusion, this detection method offers the advantages of simplicity, rapidity, strong timeliness, and specificity, making it suitable for on-site detection. It can be used for qualitative screening of nandrolone in bovine urine and quantitative analysis of nandrolone in sewage.

Study on the distribution characteristics of clearance in clothing and influence on pressure

PurposeThe purpose of this paper is to investigate the distribution characteristics of airflow in mine ventilation suits with different pipeline structures when the human body is bent at various angles. On this basis, the stress points are extracted to investigate the pressure variation of a ventilation suit under different ventilation rates and pipeline structures.Design/methodology/approachBased on the three-dimensional human body scanner, portable pressure test and other instruments, a human experiment was conducted in an artificial cabin. The study analyzed and compared the distribution characteristics of clearance under three different pipeline structures, as well as the pressure variation of the ventilation suit.FindingsThe study found that the clearance in front of two pipeline structures gradually increased in size as the degree of bending increased, and there was minimal clearance in the chest and back. The longitudinal structure exhibits a significant decrease in clearance compared to the spiral structure. The pressure value of the spiral pipeline structure with the same ventilation volume is low, followed by the transverse structure, while the longitudinal structure has the highest pressure value. The increase in clothing pressure value of a spiral pipeline structured ventilation suit with varying ventilation volumes is minimal.Originality/valueThe ventilation suit has a promising future as a type of personal protective equipment for mitigating heat damage in mines. It is of great value to study the pipeline structure of the ventilation suit for human comfort.

ExoventQ: A Novel Low-Cost Portable Negative Pressure Ventilator Design and Implementation

ExoventQ: A Novel Low-Cost Portable Negative Pressure Ventilator Design and Implementation

Ab. No. 62 Spatiotemporal Parameters of Gait Symmetry and Asymmetry in Normal Healthy Individuals

Introduction: Human gait, or the way people walk, is a complicated motor activity involving coordinated movements of different parts of the body. It is crucial in everyday activities and is influenced by a variety of factors such as age, health status, and musculoskeletal and neurological disorders. Understanding the many characteristics of gait, especially symmetry and asymmetry, is critical for getting insights into normal locomotion patterns and recognizing potential deviations associated with certain conditions. The objective of the current study is to determine the of spatiotemporal parameters of gait symmetry and asymmetry in individuals aged 20 to 79. Methods: A Cross-sectional observational study was done on 72 healthy adults (20 to 79 years) using convenience sampling. Subjects were divided into six groups according to the decade having 12 subjects in each group. Gait analysis was done using a portable single layer pressure sensitive walkway (Gait Rite). Subjects were asked to walk three times on the walkway at their preferred speed and data was collected. Result: A total of 9 spatiotemporal parameters were studied for evaluating asymmetry of these 7 spatiotemporal parameters were consistently asymmetry across the age groups and two parameters were consistently symmetrical across the age groups. Conclusion: The study establishes spatiotemporal parameters of gait symmetry and asymmetry across the age groups in normal ambulatory individuals. Implications: The identification of consistent asymmetry and symmetry in spatiotemporal gait parameters across age groups provides valuable insights for understanding the nuances of normal locomotion, aiding in the characterization of age-related variations, and serving as a foundation for detecting potential deviations associated with various conditions.

Is a portable pressure plate an alternative to force plates for measuring postural stability and interlimb coordination of quiet standing balance control?

Center-of-pressure (COP) synchronization and symmetry can inform adaptations in balance control following one-sided sensorimotor impairments (e.g., stroke). As established force plates are impossible to transport, we aimed to criterion validate a portable pressure plate for obtaining reliable COP synchronization and symmetry measures, next to conventional postural stability measures. Twenty healthy adults participated. In a single session, three 40-s eyes-open and eyes-closed quiet stance trials were performed per plate-type, randomly ordered. Individual-limb COPs were measured to calculate between-limb synchronization (BLS) and dynamic control asymmetry (DCA). Net COP (i.e., limbs combined) area, amplitude, and velocity were used to describe anteroposterior (AP) and mediolateral (ML) postural stability. Criterion validity was evaluated using Spearman correlations (r) and Bland-Altman plots. Test-retest reliability was tested using intraclass correlation coefficients (ICC). Strong correlations (r > 0.75) and acceptable reliability (ICC > 0.80) were found regarding individual-limb COP velocity and DCA, net COP ML amplitude and AP and ML velocities. Bland-Altman plots yielded possible proportional bias; the pressure plate systematically underestimated COP scores by force plates and a larger error associated with a larger measurement. Despite correlations between instruments and sufficient reliability for measuring postural stability and DCA, this technical note strongly suggests, due to a systematic deviation, using the same plate-type to accurately assess performance change within subjects longitudinally over time.

Transient Test-Based Techniques for Checking the Sealing of In-Line Shut-Off Valves and Capturing the Effect of Series Junctions—Field Tests in a Real Pipe System

In-line valves are devices typically used for isolation or flow regulation in pipe systems, playing a key role in the operational management of transmission mains (TM). However, there is no fast and expeditious procedure available for checking the efficacy of the sealing mechanism, and its ability to prevent leakage, unwanted flow or partial blockages, which is a crucial action for any maintenance operation. Due to the different values of the conveyed discharge, the diameter changes along the TM at a series junctions which therefore makes diameter changes a very common singularity. This paper has two aims. The first one is to evaluate the feasibility of Inverse Transient Analysis (ITA) for checking the sealing of in-line valves. In particular, the primary objective of the numerical model is to identify the distinctive features of the measured pressure signals that correspond to the status of an in-line valve, discerning whether it is fully sealed or partially closed. The second objective is to use Direct Analysis (DA) of the pressure signals to appropriately capture the transient response of the series junctions. To address these issues, safe transients have been generated in a real TM by means of a Portable Pressure Wave Maker (PPWM) device, refined at the Water Engineering Laboratory (WEL) of the University of Perugia, Italy. The results of the field tests and numerical model point out that the positive pressure wave reflected by the in-line valve is smaller than the one expected if it were perfectly sealed. Moreover, the transient response of the series junction has been properly captured by the DA of the pressure signal. Accordingly, the proposed procedures have been demonstrated to be suitable tools for the management of long transmission pipelines.

Enhanced Pain Relief and Muscle Growth in Individuals with Low Back Instability: The Impact of Blood Flow Restriction Exercise during Sit to Stand Movements.

BACKGROUND Blood flow restriction exercise (BFRE) improves muscle strength at a relatively low intensity by temporarily restricting blood flow. This study compared pain and quadriceps muscle mass (QMM) in 40 patients with lower back pain (LBP) undertaking sit-to-stand (STS) exercise with and without blood flow restriction. MATERIAL AND METHODS Forty adults were divided into 2 groups, and the experimental group (n=20) performed an STS exercise with BFRE, and the control group (n=20) performed an STS exercise without BFRE. Blood pressure, including systolic blood pressure (SBP) and diastolic blood pressure (DBP), was measured using a portable blood pressure monitor. Saturation of percutaneous oxygen (SpO2) was measured using oxygen saturation. Pain was measured using the visual analog scale (VAS) and the Oswestry disability index (ODI). QMM was assessed using ultrasonography. RESULTS Data were analyzed using paired and independent t tests. SBP (P=.000), DBP (P=.004), and SpO2 (P=.001) were significantly different in the experimental group, both before and during the intervention. The VAS scores showed a statistically significant difference in the post-test (P=.003) and rate of change (P=.009) between the groups. The ODI scores showed statistically significant differences in the post-test (P=.000) and rate of change (P=.001) comparison between the groups. The rate of change in QMM, including the rectus femoris (P=.000), vastus intermedius (P=.004), vastus medialis (P=.001), and vastus lateralis (P=.014), increased significantly in the experimental group compared to that in the control group. CONCLUSIONS This study demonstrates that the additive effect of BFRE on pain relief and QMM increase, thus contributing to existing knowledge about therapeutic exercise for the effective management of LBP.

Rapid and selective detection of nitrite in ham sausage and water samples by a portable gas pressure meter

A facile and portable method was established for the detection of nitrite (NO2-) by a portable gas pressure meter. NO2- and sodium cyclamate were reacted specifically under acidic condition, cyclohexene and nitrogen were thus generated, the pressures of reaction bottles were measured by a portable gas pressure meter. The pressures in bottles were increased gradually and proportional to the increase of NO2- concentration, the detection of NO2- was thus achieved. This method ensured good selectivity for the detection of NO2- and avoided interferences from other coexisting ions. In the range of 2–100 mg L−1 (43–2174 μmol L−1), the gas pressure was linearly correlated with the NO2- concentration, and a limit of detection of 0.65 mg L−1 (14 μmol L−1) was obtained. The developed method was further used for NO2- detection in water and ham sausage samples, recoveries of 94–106 % were obtained. It is a potential simple, rapid, portable analytical system/method for on-site detection of NO2-.

Use of a portable negative pressure wound therapy device on a hard-to-heal wound with exposed bone: a case study.

This case study examines the effectiveness of using negative pressure wound therapy (NPWT) in the management of a hard-to-heal (chronic) wound with exposed ankle bone to reduce associated wound exudate and promote production of granulation tissue. A 60-year-old male patient who was able to attend wound follow-up diligently twice weekly for eight weeks, and weekly thereafter, was selected from a private hospital to take part. During each dressing change, the wound was cleansed with superoxidised cleansing solution, and minimal sharp debridement was performed. In the authors' opinion, the NPWT device used in this study is light and convenient for use in the community or home care setting. The NPWT wound dressing was connected to the NPWT machine via a connecting tube and the device then switched on using the default setting of a negative pressure of 125mmHg. Following the application of the NPWT device, the exposed ankle bone was successfully covered with healthy granulation tissue and healed within 20 weeks with minimal exudate formation in the wound. In the authors' opinion, NPWT is able to promote progress to wound healing; to minimise unnecessary dressing changes and, based on feedback from the patient, is comfortable to wear and when in use.

Design of Portable Noninvasive Positive Pressure Ventilator System Based on Threshold Trigger of Flow Rate Change

In order to effectively treat respiratory diseases, a non-invasive positive pressure ventilator system is designed, the overall structure design of the system is proposed, and the hardware construction is completed. The breathing state of the patient is identified by the threshold triggering method of the flow rate of change, and the calculation of the flow rate of change is realized by the least squares method. At the same time, the breathing parameters are calculated in real time according to the flow-time and pressure-time characteristic curves. In addition, CMV, CPAP, BiPAP and PSV ventilation modes are also implemented. Finally, the parameter measurement accuracy and ventilation mode setting tests are carried out. The results show that the calculation of key breathing parameters provided by the system meets the relevant standards, and supports the stable output of 4 ventilation modes at the same time, provides breathing treatment for patients, and meets the basic functional requirements of the ventilator.

Portable non-battery pressure monitoring gloves for basketball sport analysis

Portable non-battery pressure monitoring gloves for basketball sport analysis

Portable Negative Pressure Wound Dressing in Oncoplastic Conservative Surgery for Breast Cancer: A Valid Ally.

Background and Objectives: The use of oncoplastic techniques has spread widely in the last decade, with an expansion of the indications and demonstration of excellent oncological safety profiles. A potential downside may be the increased complication rates, which could influence the timing of adjuvant therapy. To date, there is increasing evidence that negative pressure therapy on closed wounds can reduce complication rates after surgery. From this perspective, we tested the use of portable negative pressure wound dressings (NPWDs) in oncoplastic surgery to minimize early post-operative admissions to the outpatient clinic and prevent surgical complications. Materials and Methods: An observational prospective cohort study was conducted on a population of patients who underwent quadrantectomy and wise-pattern reduction mammoplasty for breast cancer. The primary objective of the study is represented by the evaluation of the impact of NPWD on post-operative outcomes in an oncoplastic surgery setting. Patients enrolled between January 2021 and January 2023 were divided into two groups, the conventional dressing (CD) group and the NPWD group, by a simple randomization list. Results: A total of 100 patients were enrolled, with 52 in the CD group and 48 in the NPWD group. The use of NPWD significantly reduced the wound dehiscence rate (2.0% vs. 7.7% p = 0.002) and the number of one-month postoperative admissions to our clinic (3.8 ± 1.1 vs. 5.7 ± 1.3 p = 0.0009). Although not significant, it is possible to note a trend of reduction of clinically relevant postoperative total complications in patients treated with NPWDs. Conclusions: NPWDs may represent a useful tool in the post-surgical management of complex oncoplastic procedures, ensuring less wound dehiscence. Furthermore, the use of these dressings led to a significant reduction in admissions to the clinic, promoting a lower use of resources by hospitals and effective prevention of possible complications.

Hybrid Regenerative Therapy for Successful Reconstruction of an Infected Traumatized Diabetic Foot Wound.

Diabetic foot ulcers are a significant complication of diabetes, affecting millions globally, and require appropriate antibiotics, surgical debridement, wound care, and metabolic optimization for management. This article presents an innovative hybrid regenerative therapy for reconstructing an infected, traumatized foot wound of a 62-year-old man with diabetes mellitus who presented with a week-old injury after a car accident. At presentation, he had a 14 × 10 cm dorsal foot wound with skin necrosis, pus discharge, and bony instability owing to partial fractures and joint dislocations. Antibiotics were administered to treat multidrug-resistant bacteria and followed by surgical debridement and the application of a portable Velnext negative pressure wound therapy device. Once the wound condition stabilized, hybrid regenerative therapy was performed weekly. Six milliliters platelet-rich plasma and 6 mL platelet-poor plasma were prepared from 27 mL of venous blood mixed with 3 mL sodium citrate and injected into the tendons, soft-tissues, and muscles. Next, the exposed bones and tendons were covered with platelet-rich fibrin and semi-occlusive membranes, and a Velnext negative pressure wound therapy device was applied over them. The wound improved progressively during the subsequent 6 weeks and was finally covered with a split-skin graft. The patient had a successful 18-month postoperative period until now with stable grafts, anatomical restoration, and excellent foot functionality. Thus, hybrid regenerative therapy, encompassing several prevalent methods for healing wounds, has excellent benefits for treating complex diabetic foot ulcers.