Porous Metal-organic Frameworks Research Articles

Unlocking Direct Lithium Extraction in Harsh Conditions through Thiol-Functionalized Metal-Organic Framework Subnanofluidic Membranes.

Metal-organic framework (MOF) membranes with high ion selectivity are highly desirable for direct lithium-ion (Li+) separation from industrial brines. However, very few MOF membranes can efficiently separate Li+ from brines of high Mg2+/Li+ concentration ratios and keep stable in ultrahigh Mg2+-concentrated brines. This work reports a type of MOF-channel membranes (MOFCMs) by growing UiO-66-(SH)2 into the nanochannels of polymer substrates to improve the efficiency of MOF membranes for challenging Li+ extraction. The resulting membranes demonstrate excellent monovalent metal ion selectivity over divalent metal ions, with Li+/Mg2+ selectivity up to 103 since Mg2+ should overcome a higher energy barrier than Li+ when transported through the MOF pores, as confirmed by molecular dynamics simulations. Under dual-ion diffusion, as the Mg2+/Li+ mole ratio of the feed solution increases from 0.2 to 30, the membrane Li+/Mg2+ selectivity decreases from 1516 to 19, corresponding to the purity of lithium products between 99.9 and 95.0%. Further research on multi-ion diffusion that involves Mg2+ and three monovalent metal ions (K+, Na+, and Li+, referred to as M+) in the feed solutions shows a significant improvement in Li+/Mg2+ separation efficiency. The Li+/Mg2+ selectivity can go up to 1114 when the Mg2+/M+ molar concentration ratio is 1:1, and it remains at 19 when the ratio is 30:1. The membrane selectivity is also stable for 30 days in a highly concentrated solution with a high Mg2+/Li+ concentration ratio. These results indicate the feasibility of the MOFCMs for direct lithium extraction from brines with Mg2+ concentrations up to 3.5 M. This study provides an alternative strategy for designing efficient MOF membranes in extracting valuable minerals in the future.

CO2-Based Stable Porous Metal-Organic Frameworks for CO2 Utilization.

The transformation of carbon dioxide (CO2) into functional materials has garnered considerable worldwide interest. Metal-organic frameworks (MOFs), as a distinctive class of materials, have made great contributions to CO2 capture and conversion. However, facile conversion of CO2 to stable porous MOFs for CO2 utilization remains unexplored. Herein, we present a facile methodology of using CO2 to synthesize stable zirconium-based MOFs. Two zirconium-based MOFs CO2-Zr-DEP and CO2-Zr-DEDP with face-centered cubic topology were obtained via a sequential desilylation-carboxylation-coordination reaction. The MOFs exhibit excellent crystallinity, as verified through powder X-ray diffraction and high-resolution transmission electron microscopy analyses. They also have notable porosity with high surface area (SBET up to 3688 m2 g-1) and good CO2 adsorption capacity (up to 12.5 wt %). The resulting MOFs have abundant alkyne functional moieties, confirmed through 13C cross-polarization/magic angle spinning nuclear magnetic resonance and Fourier transform infrared spectra. Leveraging the catalytic prowess of Ag(I) in diverse CO2-involved reactions, we incorporated Ag(I) into zirconium-based MOFs, capitalizing on their interactions with carbon-carbon π-bonds of alkynes, thereby forming a heterogeneous catalyst. This catalyst demonstrates outstanding efficiency in catalyzing the conversion of CO2 and propargylic alcohols into cyclic carbonates, achieving >99% yield at room temperature and atmospheric pressure conditions. Thus, this work provides a dual CO2 utilization strategy, encompassing the synthesis of CO2-based MOFs (20-24 wt % from CO2) and their subsequent application in CO2 capture and conversion processes. This approach significantly enhances overall CO2 utilization.

Molecular-caged metal-organic frameworks for energy management.

Metal-organic frameworks (MOFs) hold great promise for diverse applications when combined with polymers. However, a persistent challenge lies in the susceptibility of exposed MOF pores to molecule and polymer penetration, compromising the porosity and overall performance. Here, we design a molecular-caged MOF (MC-MOF) to achieve contracted window without sacrificing the MOF porosity by torsional conjugated ligands. These molecular cages effectively shield against the undesired molecule penetration during polymerization, thereby preserving the pristine porosity of MC-MOF and providing outstanding light and thermal management to the composites. The polymer containing 0.5 wt % MC-MOF achieves an 83% transmittance and an exceptional haze of 93% at 550 nanometers, coupled with remarkable thermal insulation. These MC-MOF/polymer composites offer the potential for more uniform daylighting and reduced energy consumption in sustainable buildings when compared to traditional glass materials. This work delivers a general method to uphold MOF porosity in polymers through molecular cage design, advancing MOF-polymer applications in energy and sustainability.

The Surface of Colloidal Metal-Organic Framework Nanoparticles Revealed by Vibrational Sum Frequency Scattering Spectroscopy.

Solvation shells strongly influence the interfacial chemistry of colloidal systems, from the activity of proteins to the colloidal stability and catalysis of nanoparticles. Despite their fundamental and practical importance, solvation shells have remained largely undetected by spectroscopy. Furthermore, their ability to assemble at complex but realistic interfaces with heterogeneous and rough surfaces remains an open question. Here, we apply vibrational sum frequency scattering spectroscopy (VSFSS), an interface-specific technique, to colloidal nanocrystals with porous metal-organic frameworks (MOFs) as a case study. Due to the porous nature of the solvent-particle boundary, MOF particles challenge conventional models of colloidal and interfacial chemistry. Their multiweek colloidal stability in the absence of conventional surface ligands suggests that stability may arise in part from solvation forces. Spectra of colloidally stable Zn(2-methylimidazolate)2 (ZIF-8) in polar solvents indicate the presence of ordered solvation shells, solvent-metal binding, and spontaneous ordering of organic bridging linkers within the MOF. These findings help explain the unexpected colloidal stability of MOF colloids, while providing a roadmap for applying VSFSS to wide-ranging colloidal nanocrystals in general.

Three-dimensional porous bimetallic metal-organic framework/gelatin aerogels: A readily recyclable peroxymonosulfate activator for efficient and continuous organic dye removal

As promising catalysts for the degradation of organic pollutants, metal-organic frameworks (MOFs) often face limitations due to the particle agglomeration and challenging recovery in liquid-catalysis application, stemming from their powdery nature. Engineering macroscopic structures from pulverous MOF is thus of great importance for broadening their practical applications. In this study, three-dimensional porous MOF aerogel catalysts were successfully fabricated for degrading organic dyes by activating peroxymonosulfate (PMS). MOF/gelatin aerogel (MOF/GA) catalysts were prepared by directly integrating bimetallic FeCo-BDC with gelatin solutions, followed by freeze-drying and low-temperature calcination. The FeCo-BDC-0.15/GA/PMS system exhibited remarkable performance in degrading various organic dyes, eliminating 99.2% of rhodamine B within a mere 5 minutes. Compared to the GA/PMS system, there was over a 300-fold increase in the reaction rate constant. Remarkably, high removal efficiency was maintained across varying conditions, including different solution pH, co-existing inorganic anions, and natural water matrices. Radical trapping experiments and electron paramagnetic resonance analysis revealed that the degradation involved radical (SO4•−) and non-radical routes (1O2), of which 1O2 was dominant. Furthermore, even after a continuous 400-minute reaction in a fixed bed reactor at a liquid hourly space velocity of 27 h−1, the FeCo-BDC/GA composite sustained a degradation efficiency exceeding 98.7%. This work presents highly active MOF-gelatin aerogels for dye degradation and expands the potential for their large-scale, continuous treatment application in organic dye wastewater management.

Plasma-Driven Efficient Conversion of CO2 and H2O into Pure Syngas with Controllable Wide H2/CO Ratios over Metal-Organic Frameworks Featuring In SituEvolved Ligand Defects.

While the mild production of syngas (a mixture of H2 and CO) from CO2 and H2O is a promising alternative to the coal-based chemical engineering technologies, the inert nature of CO2 molecules, unfavorable splitting pathways of H2O and unsatisfactory catalysts lead to the challenge in the difficult integration of high CO2 conversion efficiency with produced syngas with controllable H2/CO ratios in a wide range. Herein, we report an efficient plasma-driven catalytic system for mild production of pure syngas over porous metal-organic framework (MOF) catalysts with rich confined H2O molecules, where their syngas production capacity is regulated by the in situ evolved ligand defects and the plasma-activated intermediate species of CO2 molecules. Specially, the Cu-based catalyst system achieves 61.9 % of CO2 conversion and the production of pure syngas with wide H2/CO ratios of 0.05:1-4.3:1. As revealed by the experimental and theoretical calculation results, the in situ dynamic structure evolution of Cu-containing MOF catalysts favors the generation of coordinatively unsaturated metal active sites with optimized geometric and electronic characteristics, the adsorption of reactants, and the reduced energy barriers of syngas-production potential-determining steps of the hydrogenation of CO2 to *COOH and the protonation of H2O to *H.

A Bioinspired Copper-Pair Catalyst in Metal-Organic Frameworks for Molecular Dioxygen Activation and Aerobic Oxidative C-N Coupling.

Open Cu sites were loaded to the UiO-67 metal-organic framework (MOF) skeleton by introduction of flexible Cu-binding pyridylmethylamine (pyma) side chains to the biphenyldicarboxylate linkers. Distance between Cu centers in the MOF pores was tuned by controlling the density of metal-binding side chains. "Interacted" Cu-pair or "isolated" monomeric Cu sites were achieved with high and low (pyma)Cu side chain loading, respectively. Spectroscopic and theoretical studies indicate that "interacted" Cu pairs can effectively bind and activate molecular dioxygen to form Cu2O2 clusters, which showed high catalytic activity for aerobic oxidative C-N coupling. On the contrary, MOF catalyst bearing isolated monomeric Cu sites only showed modest catalytic activity. Enhancement in catalytic performance for the Cu-pair catalyst is attributed to the remote synergistic effect of the paired Cu site, which binds molecular dioxygen and cleaves the O═O bond in a collaborative manner. This work demonstrates that noncovalently interacted metal-pair sites can effectively activate inert small molecules and promote heterogeneous catalytic processes.

Hierarchically Ordered Pore Engineering of Metal-Organic Framework-Based Materials for Electrocatalysis.

Ordered pore engineering that embeds uniform pores with periodic alignment in electrocatalysts opens up a new avenue for achieving further performance promotion. Hierarchically ordered porous metal-organic frameworks (HOP-MOFs) possessing multilevel pores with ordered distribution are the promising precursors for the exploration of ordered porous electrocatalysts, while the scalable acquisition of HOP-MOFs with editable components and adjustable pore size regimes is critical. This review presents recent progress on hierarchically ordered pore engineering of MOF-based materials for enhanced electrocatalysis. The synthetic strategies of HOP-MOFs with different pore size regimes, including the self-assembly guided by reticular chemistry, surfactant, nanoemulsion, and nanocasting, are first introduced. Then the applications of HOP-MOFs as the precursors for exploring hierarchically ordered porous electrocatalysts are summarized, selecting representatives to highlight the boosted performance. Especially, the intensification of molecule and ion transport integrated with optimized electron transfer and site exposure over the hierarchically ordered porous derivatives are emphasized to clarify the directional transfer and integration effect endowed by ordered pore engineering. Finally, the remaining scientific challenges and an outlook of this field are proposed. It is hoped that this review will guide the hierarchically ordered pore engineering of nanocatalysts for boosting the catalytic performance and promoting the practical applications.

Understanding the effect of density functional choice and van der Waals treatment on predicting the binding configuration, loading, and stability of amine-grafted metal organic frameworks.

Metal organic frameworks (MOFs) are crystalline, three-dimensional structures with high surface areas and tunable porosities. Made from metal nodes connected by organic linkers, the exact properties of a given MOF are determined by node and linker choice. MOFs hold promise for numerous applications, including gas capture and storage. M2(4,4'-dioxidobiphenyl-3,3'-dicarboxylate)-henceforth simply M2(dobpdc), with M = Mg, Mn, Fe, Co, Ni, Cu, or Zn-is regarded as one of the most promising structures for CO2 capture applications. Further modification of the MOF with diamines or tetramines can significantly boost gas species selectivity, a necessity for the ultra-dilute CO2 concentrations in the direct-air capture of CO2. There are countless potential diamines and tetramines, paving the way for a vast number of potential sorbents to be probed for CO2 adsorption properties. The number of amines and their configuration in the MOF pore are key drivers of CO2 adsorption capacity and kinetics, and so a validation of computational prediction of these quantities is required to suitably use computational methods in the discovery and screening of amine-functionalized sorbents. In this work, we study the predictive accuracy of density functional theory and related calculations on amine loading and configuration for one diamine and two tetramines. In particular, we explore the Perdew-Burke-Ernzerhof (PBE) functional and its formulation for solids (PBEsol) with and without the Grimme-D2 and Grimme-D3 pairwise corrections (PBE+D2/3 and PBEsol+D2/3), two revised PBE functionals with the Grimme-D2 and Grimme-D3 pairwise corrections (RPBE+D2/3 and revPBE+D2/3), and the nonlocal van der Waals correlation (vdW-DF2) functional. We also investigate a universal graph deep learning interatomic potential's (M3GNet) predictive accuracy for loading and configuration. These results allow us to identify a useful screening procedure for configuration prediction that has a coarse component for quick evaluation and a higher accuracy component for detailed analysis. Our general observation is that the neural network-based potential can be used as a high-level and rapid screening tool, whereas PBEsol+D3 gives a completely qualitatively predictive picture across all systems studied, and can thus be used for high accuracy motif predictions. We close by briefly exploring the predictions of relative thermal stability for the different functionals and dispersion corrections.

Enhancing antimicrobial efficacy: 8-Hydroxyquinoline incorporation into metal-organic frameworks with iron ion coupling

The antimicrobial properties of 8-Hydroxyquinoline (8-Hq), a small organic compound known for its metal-chelating capabilities, hold significant promise. However, its limited solubility in water poses a challenge for practical applications. In this study, we address this limitation by augmenting the antimicrobial efficacy of 8-Hq through its integration into the metal-organic framework UiO-66 (named 8-Hq@UiO-66) and coupling it with iron ions (designated as Fe/8-Hq@UiO-66) via an adsorption process. The sorption isotherm and adsorption kinetics were meticulously examined using Langmuir's adsorption model and the pseudo-second-order kinetic model. Material characterization techniques including powder X-ray powder diffraction, Fourier transform infrared spectroscopy, thermogravimetric analysis, nitrogen adsorption isotherms, ultraviolet–visible spectroscopy, and photoluminescence spectroscopy revealed the coordination of zirconium clusters and iron with the nitrogen and hydroxyl groups of 8-Hq, respectively. Furthermore, our investigation into metal ion adsorption demonstrated that the 8-Hq@UiO-66 composite displayed a notable selectivity for iron ions over other metal ions in aqueous media. Under optimized conditions, the adsorption capacity for iron ions ranged from approximately 34–46 mg g−1. Importantly, the Fe/8-Hq@UiO-66 composite exhibited potent antimicrobial activity against Bacillus subtilis, Staphylococcus aureus, and Escherichia coli. These findings underscore the potential of incorporating 8-Hq into porous metal-organic frameworks and coupling it with iron ions to enhance its antimicrobial efficacy.

Cross-Polarization Solid-State NMR Quantification of Species within Pores of Metal-Organic Frameworks: A Case Study of α-Mg3(HCOO)6.

The quantitative measurement of adsorbed guest species within Metal-organic framework (MOF) pores is of fundamental importance for evaluating the adsorption performance of MOFs. However, routine analytic techniques such as thermogravimetric analysis cannot distinguish the contribution from species adsorbed within pores, species adsorbed on the surface, and gas phase or liquid phase encapsulated in the inter-crystalline space. Herein, we developed a new quantification method based on the cross-polarization (CP) solid-state nuclear magnetic resonance (SSNMR) technique, in which only the species within MOF pores are selectively probed due to the dramatically reduced mobility. Using the commercialized MOF α-Mg3(HCOO)6 as an example, a good linear correlation between Areaguest/Areaframework (i.e., the integrated area of guest and framework 13C NMR signals, respectively) and guest loading can be observed for several representative molecules such as benzene, tetrahydrofuran (THF), and 1,4-dioxane, clearly revealing the feasibility of CP quantification approach. The effects of guest molecule and corresponding residual mobility on the CP quantification are further discussed by varying the geometry and size of guest molecules. This methodology thus provides an effective and irreplaceable route to evaluate the adsorption performance of porous materials in-depth, especially for liquid-phase adsorption and gas-phase adsorption in which the capillary condensation is not negligible.

Facile Construction of Stable Hierarchical Porous Metal–Organic Frameworks for In Situ Immobilization of β-Glucosidase Based on Competitive Coordination and Selective Etching Strategies

Facile Construction of Stable Hierarchical Porous Metal–Organic Frameworks for In Situ Immobilization of β-Glucosidase Based on Competitive Coordination and Selective Etching Strategies

Cobalt(III) Halide Metal-Organic Frameworks Drive Catalytic Halogen Exchange.

The selective halogenation of complex (hetero)aromatic systems is a critical yet challenging transformation that is relevant to medicinal chemistry, agriculture, and biomedical imaging. However, current methods are limited by toxic reagents, expensive homogeneous second- and third-row transition metal catalysts, or poor substrate tolerance. Herein, we demonstrate that porous metal-organic frameworks (MOFs) containing terminal Co(III) halide sites represent a rare and general class of heterogeneous catalysts for the controlled installation of chlorine and fluorine centers into electron-deficient (hetero)aryl bromides using simple metal halide salts. Mechanistic studies support that these halogen exchange (halex) reactions proceed via redox-neutral nucleophilic aromatic substitution (SNAr) at the Co(III) sites. The MOF-based halex catalysts are recyclable, enable green halogenation with minimal waste generation, and facilitate halex in a continuous flow. Our findings represent the first example of SNAr catalysis using MOFs, expanding the lexicon of synthetic transformations enabled by these materials.

Modular Synthesis of Templated Bimetallic Sites in Metal–Organic Framework Pores

Modular Synthesis of Templated Bimetallic Sites in Metal–Organic Framework Pores

Eye-Readable and Wearable Colorimetric Sensor Arrays for In Situ Monitoring of Volatile Organic Compounds.

Wearable sensors utilize changes in color as a response to physiological stimuli, making them easily recognizable by the naked eye. These colorimetric wearable sensors offer benefits such as easy readability, rapid responsiveness, cost-effectiveness, and straightforward manufacturing techniques. However, their applications in detecting volatile organic compounds (VOCs) in situ have been limited due to the low concentration of complex VOCs and complicated external interferences. Aiming to address these challenges, we introduced readable and wearable colorimetric sensing arrays with a microchannel structure and highly gas-sensitive materials for in situ detection of complex VOCs. The highly gas-sensitive materials were designed by loading gas-sensitive dyes into the porous metal-organic frameworks and further depositing the composites on the electrospun nanofiber membrane. The colorimetric sensor arrays were fabricated using various gas-sensitive composites, including eight dye/MOF composites that respond to various VOCs and two Pd2+/dye/MOF composites that respond to ethylene. This enables the specific recognition of multiple characteristic VOCs. A microfluidic channel made of polydimethylsiloxane (PDMS) was integrated with different colorimetric elements to create a wearable sensor array. It was attached to the surface of fruits to collect and monitor VOCs using the DenseNet classification method. As a proof of concept, we demonstrated the feasibility of the wearable sensing system in monitoring the ripening process of fruits by continuously measuring the VOC emissions from the skin of the fruit.

Germ must be found: The HNT@RhB@MOF-Tb polychromatic fluorescent nanoprobe is applied for the visual detection of 2,6-dipicolinic acid

A polychromatic fluorescent nanoprobe based on natural halloysite nanotubes with fluorescent dyes and porous metal–organic frameworks co-loaded on the surface and inner wall of the nanotubes was constructed for the highly sensitive visual identification of the Bacillus anthracis biomarker 2,6-dichlorophenolic acid (DPA). The limit of detection for DPA was 11.27 nM, which is significantly lower than the spore-borne dose for anthrax infection (60 uM). The multi-color fluorescent probe showed potential for rapid, accurate, and highly selective detection of Bacillus anthracis markers in actual samples. Besides, a portable fluorescence detection platform was developed in combination with a smartphone color scanning APP to simplify the detection process and realize real-time semi-quantitative analysis.

An amino acid-functionalized coordination polymer of Cd(II) as a fluorescent probe detecting Cu(II) ion

Cd(II) complex 1, namely {[Cd(HL)]·CH3OH}n was design as a new fluorescence probe for measuring concentration of Cu2+ ion in aqueous solution. Complex 1 is a 3,6-connected double-layered porous metal–organic framework, which was synthesized by optimizing the ratio of Cd(OH)2 and a new ligand 4'-(((1-carboxyethyl)amino)methyl)-[1,1′-biphenyl]-3,5-dicarboxylic acid (H3L) under solvothermal conditions. It not only had good thermal and solvent stabilities, but also displayed a strong solid-state fluorescence centered at 375 nm with a moderate quantum yield of 37.12% under excitation at 275 nm. More importantly, its fluorescence could be obviously quenched by the addition of Cu2+ ion. The fluorescence quenching may be caused by the weak coordination interaction between Cu2+ and the uncoordinated imino N in ligand (HL)2–, as well as the slightly competitive absorption of excitation light by Cu2+. In the low concentration range of Cu2+ ion, the fluorescence quenching efficiency of complex 1 is closely related to the concentration of Cu2+ ion, and the relationship between fluorescence quenching efficiency and the concentration of added Cu2+ ion could be well fitted by Stern-Volmer equation with KSV being 1.589 × 104 M−1 and the detection limit for Cu2+ ion being 5.7 μM. Our case may provide potential applications for the detection of Cu2+ ion in daily domestic water.

A novel magnetic Fe, N co-doped Ce-MOFs derived carbon as a peroxymonosulfate activator for the degradation of tetracycline hydrochloride: Performance and activation mechanism

The activation of peroxymonosulfate (PMS) using metal-organic frameworks (MOFs) has garnered significant interest in the field of wastewater treatment. However, the environmental challenges associated with traditional methods for synthesizing MOFs precursors, such as the requirement for high temperatures and pressures, remain. Furthermore, the catalytic performance and stability of mono-metallic materials are areas needing enhancement. This work successfully synthesized a novel magnetic Fe-Ce bimetallic N-doped porous MOF material (Fe/Ce@5MNC). The optimized Fe/Ce@5MNC exhibited a higher specific surface area and a more extensive pore structure, as verified by various characterization techniques. Moreover, the synthesis process of the precursor is simpler, energy-saving, and relatively environmentally friendly. Notably, the synergistic effect between Fe and Ce, coupled with the presence of multiple active sites such as FeNx and graphite N, enabled Fe/Ce@5MNC to decompose 86.4 % of TCH within 30 min, marking a 31.4 % increase over Ce@NC. After four cycles, the catalyst maintained good surface stability, with the degradation efficiency remaining at 67.7 %. Quenching and electron paramagnetic resonance (EPR) experiments confirmed that the main degradation mechanisms are singlet oxygen (1O2) generation and electron transfer. This study presents a new method for synthesizing efficient Fe, N co-doped magnetic bimetallic PMS activators and designing carbon catalysts for deep oxidation.

Layer by Layer Spraying Fabrication of Aggregation-Induced Emission Metal-Organic Frameworks Thin Film.

The development of new metal-organic frameworks (MOFs) thin films is important for expanding their functions and applications. Herein, we first report a new kind of MOF thin film by using aggregation-induced emission (AIE) dicarboxyl ligand through a liquid-phase epitaxial (LPE) layer-by-layer (LBL) spraying method (named AIE surface-coordinated metal-organic frameworks thin film, AIE-SURMOF). The obtained AIE-SURMOF Zn4 O(TPE)3 (ZnTPE) has highly growth orientation and homogeneous thin film, showing strong fluorescent property. Furthermore, by loading chiral guest in the MOF pore, the formed chiral encapsulated AIE-SURMOF can clearly indicate obvious circularly polarized luminescence performance with glum of 0.01. This study provides new MOF thin film and new strategy for expanding function and application of MOF materials.

Renewal of electrical energy by green hydrogen using a metal organic framework with Fe3O4 cluster

Recently, metal-–organic frameworks (MOFs) with high porosity have drawn extensive attention in water splitting. The present study reports the synthesis of a porous Fe-based MOF by a modified precursor made of magnetite (Fe3O4). Subsequently, a series of undoped and lanthanide -doped (MOFs) are prepared using the solvothermal method. The synthesis provided a high surface area with a high specific surface and pore volume. The synthesized electrocatalyst with a high surface area is demonstrated as an excellent electrocatalyst for the hydrogen evolution reaction(HER) investigated in acidic media. The electrochemical results demonstrated low Tafel slopes (81 and 166 mV dec–−1), high exchange current, high ssurface area (Cdl) (148.29 and 150.57 mV), and high stability for Au/MIL-53 (Fe)/Gd-Fe3O4 and glassy carbon electrode GCE/MIL-53 (Fe)/La-Fe3O4. The high activity is attributed to the large surface area of the synthesized Fe/ Fe3O4-based MOF, which is porous and magnetic. The effect of base metal on catalyst performance was discussed. Through the unification of two catalytically active metals as lanthanide, a new opportunity opens up for the development of synergistic systems in multiple applications.