Pores In Lipid Bilayers Research Articles

The overexpression of human amylin in pancreatic β cells facilitate the appearance of amylin aggregates in the kidney contributing to diabetic nephropathy.

Diabetic nephropathy is one of the most frequent complications of diabetic patients and is the leading cause of end-stage renal disease worldwide. The complex physiopathology of this complication raises a challenge in the development of effective medical treatments. Therefore, a better understanding of this disease is necessary for producing more targeted therapies. In this work we propose human amylin as a possible mediator in the development of diabetic nephropathy. Islet amyloid polypeptide or amylin is a hormone co-secreted with insulin. The human isoform has the ability to fold and form amyloid aggregates in the pancreas of patients with type 2 diabetes mellitus, disrupting cellular homeostasis due to its ability to form pores in lipid bilayers. It has been described that hIAPP can be secreted and exported in extracellular vesicles outside the pancreas, being a plausible connecting mechanism between the β-cell and other peripheral tissues such as the kidney. Here, we demonstrate that tubular, podocytes and mesangial cells can incorporate hIAPP coming from β-cells. Then, this hIAPP can form aggregates inside these kidney cells, contributing to its failure. In order to study the consequences in vivo, we found amylin aggregates in the kidney of mice overexpressing hIAPP after feeding a high fat diet. In addition, we observed an increase in glomerulosclerosis index and inflammation. Specifically, there were significant changes in signalling pathways directly involved in the diabetic nephropathy such as an increased in mTORC1 signaling pathway, an alteration in mitochondrial dynamics and an increased in endoplasmic reticulum stress. All these results demonstrate the importance of hIAPP in the kidney and its possible contribution in the development of diabetic nephropathy.

Membrane-selective nanoscale pores in liposomes by a synthetically evolved peptide: implications for triggered release

Peptides that form nanoscale pores in lipid bilayers have potential applications in triggered release, but only if their selectivity for target synthetic membranes over bystander biomembranes can be optimized. Previously, we identified a novel family of α-helical pore-forming peptides called “macrolittins,” which release macromolecular cargoes from phosphatidylcholine (PC) liposomes at concentrations as low as 1 peptide per 1000 lipids. In this work, we show that macrolittins have no measurable cytolytic activity against multiple human cell types even at high peptide concentration.

PH-triggered pore-forming peptides with strong composition-dependent membrane selectivity

Peptides that self-assemble into nanometer-sized pores in lipid bilayers could have utility in a variety of biotechnological and clinical applications if we can understand their physical chemical properties and learn to control their membrane selectivity. To empower such control, we have used synthetic molecular evolution to identify the pH-dependent delivery peptides, a family of peptides that assemble into macromolecule-sized pores in membranes at low peptide concentration but only at pH < ∼6. Further advancements will also require better selectivity for specific membranes. Here, we determine the effect of anionic headgroups and bilayer thickness on the mechanism of action of the pH-dependent delivery peptides by measuring binding, secondary structure, and macromolecular poration. The peptide pHD15 partitions and folds equally well into zwitterionic and anionic membranes but is less potent at pore formation in phosphatidylserine-containing membranes. The peptide also binds and folds similarly in membranes of various thicknesses, but its ability to release macromolecules changes dramatically. It causes potent macromolecular poration in vesicles made from phosphatidylcholine with 14 carbon acyl chains, but macromolecular poration decreases sharply with increasing bilayer thickness and does not occur at any peptide concentration in fluid bilayers made from phosphatidylcholine lipids with 20-carbon acyl chains. The effects of headgroup and bilayer thickness on macromolecular poration cannot be accounted for by the amount of peptide bound but instead reflect an inherent selectivity of the peptide for inserting into the membrane-spanning pore state. Molecular dynamics simulations suggest that the effect of thickness is due to hydrophobic match/mismatch between the membrane-spanning peptide and the bilayer hydrocarbon. This remarkable degree of selectivity based on headgroup and especially bilayer thickness is unusual and suggests ways that pore-forming peptides with exquisite selectivity for specific membranes can be designed or evolved.

Membrane-selective nanoscale pores in liposomes by a synthetically evolved peptide: implications for triggered release.

Peptides that form nanoscale pores in lipid bilayers have potential applications in triggered release, but only if their selectivity for target synthetic membranes over bystander biomembranes can be optimized. Previously, we identified a novel family of α-helical pore-forming peptides called "macrolittins", which release macromolecular cargoes from phosphatidylcholine (PC) liposomes at concentrations as low as 1 peptide per 1000 lipids. In this work, we show that macrolittins have no measurable cytolytic activity against multiple human cell types even at high peptide concentration. This unprecedented selectivity for PC liposomes over cell plasma membranes is explained, in part, by the sensitivity of macrolittin activity to physical chemical properties of the bilayer hydrocarbon core. In the presence of cells, macrolittins release all vesicle-entrapped cargoes (proteins and small molecule drugs) which are then readily uptaken by cells. Triggered release occurs without any direct effect of the peptide on the cells, and without vesicle-vesicle or vesicle-cell interactions.

Free energy of hydrophilic and hydrophobic pores in lipid bilayers by free energy perturbation of a restraint.

The free energy of pore formation in lipid bilayers has been previously calculated using a variety of reaction coordinates. Here, we use free energy perturbation of a cylindrical lipid exclusion restraint to compute the free energy profile as a function of pore radius in dimyristoylphosphatidylcholine (DMPC) and dioleoylphosphatidylcholine (DOPC) bilayers. Additionally restraining the headgroups to lie on the membrane surface allows us to also calculate the free energy profile of hydrophobic pores, i.e., cylindrical pores lined by acyl chains. For certain pore radii, the free energy of wetting of hydrophobic pores is calculated using the density bias method. It is found that wetting of hydrophobic pores becomes thermodynamically favorable at 5.0 Å for DMPC and 6.5 Å for DOPC, although significant barriers prevent spontaneous wetting of the latter on a nanosecond time scale. The free energy of transformation of hydrophilic pores to hydrophobic ones is also calculated using free energy perturbation of headgroup restraints along the bilayer normal. This quantity, along with wetting and pore growth free energies, provides complete free energy profiles as a function of radius. Pore line tension values for the hydrophilic pores obtained from the slope of the free energy profiles are 37.6 pN for DMPC and 53.7 pN for DOPC. The free energy profiles for the hydrophobic pores are analyzed in terms of elementary interfacial tensions. It is found that a positive three-phase line tension is required to explain the results. The estimated value for this three-phase line tension (51.2 pN) lies within the expected range.

Experimental and Computational Characterization of Oxidized and Reduced Protegrin Pores in Lipid Bilayers.

Protegrin-1 (PG-1), an 18-residue β-hairpin stabilized by two disulfide bonds, is a member of a family of powerful antimicrobial peptides which are believed to act through membrane permeabilization. Here we used a combination of experimental and computational approaches to characterize possible structural arrangements of PG-1 in lipid bilayers mimicking bacterial membranes. We have measured the dose-response function of the PG-1-induced leakage of markers of various sizes from vesicles and found it to be consistent with the formation of pores of two different sizes. The first one allows the release of small dyes and occurs at peptide:lipid ratios < 0.006. Above this ratio, larger pores are observed through which the smallest of dextrans FD4 can be released. In parallel with pore formation, we observe a general large-scale destabilization of vesicles which is probably related to complete rupture of some vesicles. The population of vesicles that are completely ruptured depends linearly on PG-1:lipid ratio. Neither pore size, nor vesicle rupture are influenced by the formation of disulfide bonds. Previous computational work on oxidized protegrin is complemented here by all-atom MD simulations of PG-1 with reduced disulfide bonds both in solution (monomer) and in a bilayer (dimer and octamer). The simulations provide molecular insights into the influence of disulfide bonds on peptide conformation, aggregation, and oligomeric structure.

Revisiting an old antibiotic: bacitracin neutralizes binary bacterial toxins and protects cells from intoxication.

The antibiotic bacitracin (Bac) inhibits cell wall synthesis of gram-positive bacteria. Here, we discovered a totally different activity of Bac: the neutralization of bacterial exotoxins. Bac prevented intoxication of mammalian cells with the binary enterotoxins Clostridium botulinum C2, C. perfringens ι, C. difficile transferase (CDT), and Bacillus anthracis lethal toxin. The transport (B) subunits of these toxins deliver their respective enzyme (A) subunits into cells. Following endocytosis, the B subunits form pores in membranes of endosomes, which mediate translocation of the A subunits into the cytosol. Bac inhibited formation of such B pores in lipid bilayers in vitro and in living cells, thereby preventing translocation of the A subunit into the cytosol. Bac preserved the epithelial integrity of toxin-treated CaCo-2 monolayers, a model for the human gut epithelium. In conclusion, Bac should be discussed as a therapeutic option against infections with medically relevant toxin-producing bacteria, including C. difficile and B. anthracis, because it inhibits bacterial growth and neutralizes the secreted toxins.-Schnell, L., Felix, I., Müller, B., Sadi, M., von Bank, F., Papatheodorou, P., Popoff, M. R., Aktories, K., Waltenberger, E., Benz, R., Weichbrodt, C., Fauler, M., Frick, M., Barth, H. Revisiting an old antibiotic: bacitracin neutralizes binary bacterial toxins and protects cells from intoxication.

Rab-Effector-Kinase Interplay Modulates Intralumenal Fragment Formation during Vacuole Fusion

Upon vacuolar lysosome (or vacuole) fusion in S.cerevisiae, a portion of membrane is internalized and catabolized. Formation of this intralumenal fragment (ILF) is important for organelle protein and lipid homeostasis and remodeling. But how ILF formation is optimized for membrane turnover is not understood. Here, we show that fewer ILFs form when the interaction between the Rab-GTPase Ypt7 and its effector Vps41 (a subunit of the tethering complex HOPS) is interrupted by a point mutation (Ypt7-D44N). Subsequent phosphorylation of Vps41 by the casein kinase Yck3 prevents stabilization of trans-SNARE complexes needed for lipid bilayer pore formation. Impairing ILF formation prevents clearance of misfolded proteins from vacuole membranes and promotes organelle permeability and cell death. We propose that HOPS coordinates Rab, kinase, and SNARE cycles to modulate ILF size during vacuole fusion, regulating lipid and protein turnover important for quality control and membrane integrity.

Conformations and Dynamic Transitions of a Melittin Derivative That Forms Macromolecule-Sized Pores in Lipid Bilayers.

Systematically evolved from the primary active component of bee venom, MelP5 is a lipophilic peptide with important physical properties that differ from wild-type melittin, including the ability to create large equilibrium pores in lipid bilayers at low peptide to lipid ratios. Self-assembly into stable membrane spanning pores makes MelP5 a promising candidate for future applications in the pharmaceutical arena. Despite significant interest, little is known about the mechanism by which MelP5 remodels the lipid bilayer upon binding. We demonstrate by direct atomic force microscope imaging of supported lipid bilayers in solution that MelP5 remodels 1-palmitoyl-2-oleoyl- sn-glycero-3-phosphocholine (POPC) in one of two ways. It creates either highly localized voids in the bilayer or diffuse nonlocalized thinning. Thinning of the bilayer was measured to be 3.0 ± 1.4 Å (mean ± standard deviation) below the surface of the upper leaflet of the bilayer. Pores, defined as highly localized voids in the bilayer, exhibited several sizes. Approximately 20% of pores exhibited large footprint areas (47 ± 20 nm2) which appear capable of passing bulky macromolecules. The peptide-effected bilayer was observed to reversibly exchange between membrane-thinned and pore states in an apparent dynamic equilibrium. Analysis of time-lapsed images suggested upper and lower bounds (0.2 < τ < 180 s) on the characteristic time scale of transitions between the membrane-thinned and pore states. Moreover, pores were found to colocalize with membrane-thinned regions, a novel observation that is consistent with the notion of cooperativity among membrane-bound peptides when forming pores.

Metastable Prepores in Tension-Free Lipid Bilayers.

The formation and closure of aqueous pores in lipid bilayers is a key step in various biophysical processes. Large pores are well described by classical nucleation theory, but the free-energy landscape of small, biologically relevant pores has remained largely unexplored. The existence of small and metastable "prepores" was hypothesized decades ago from electroporation experiments, but resolving metastable prepores from theoretical models remained challenging. Using two complementary methods-atomistic simulations and self-consistent field theory of a minimal lipid model-we determine the parameters for which metastable prepores occur in lipid membranes. Both methods consistently suggest that pore metastability depends on the relative volume ratio between the lipid head group and lipid tails: lipids with a larger head-group volume fraction (or shorter saturated tails) form metastable prepores, whereas lipids with a smaller head-group volume fraction (or longer unsaturated tails) form unstable prepores.

Mechanism of Initial Stage of Pore Formation Induced by Antimicrobial Peptide Magainin 2.

Antimicrobial peptide magainin 2 forms pores in lipid bilayers, a property that is considered the main cause of its bactericidal activity. Recent data suggest that tension or stretching of the inner monolayer plays an important role in magainin 2-induced pore formation in lipid bilayers. Here, to elucidate the mechanism of magainin 2-induced pore formation, we investigated the effect on pore formation of asymmetric lipid distribution in two monolayers. First, we developed a method to prepare giant unilamellar vesicles (GUVs) composed of dioleoylphosphatidylglycerol (DOPG), dioleoylphosphatidylcholine (DOPC), and lyso-PC (LPC) in the inner monolayer and of DOPG/DOPC in the outer monolayer. We consider that in these GUVs, the lipid packing in the inner monolayer was larger than that in the outer monolayer. Next, we investigated the interaction of magainin 2 with these GUVs with an asymmetric distribution of LPC using the single GUV method, and found that the rate constant of magainin 2-induced pore formation, kp, decreased with increasing LPC concentration in the inner monolayer. We constructed a quantitative model of magainin 2-induced pore formation, whereby the binding of magainin 2 to the outer monolayer of a GUV induces stretching of the inner monolayer, causing pore formation. A theoretical equation defining kp as a function of magainin 2 surface concentration, X, reasonably explains the experimental relationship between kp and X. This model quantitatively explains the effect on kp of the LPC concentration in the inner monolayer. On the basis of these results, we discuss the mechanism of the initial stage of magainin 2-induced pore formation.

Pore-forming activity of new conjugate antibiotics based on amphotericin B.

A series of amides of the antifungal antibiotic amphotericin B (AmB) and its conjugates with benzoxaboroles was tested to determine whether they form pores in lipid bilayers and to compare their channel characteristics. The tested derivatives produced pores of larger amplitude and shorter lifetime than those of the parent antibiotic. The pore conductance was related to changes in the partial charge of the hydrogens of the hydroxyl groups in the lactone ring that determined the anion coordination in the channel. Neutralization of one of the polar group charges in the AmB head during chemical modification produced a pronounced effect by diminishing the dwell time of the polyene channel compared to modification of both groups. In this study, compounds that had a modification of one carboxyl or amino group were less effective in initializing phase separation in POPC-membranes compared to derivatives that had modifications of both polar groups as well as the parent antibiotic. The effects were attributed to the restriction of the aggregation process by electrical repulsion between charged derivatives in contrast to neutral compounds. The significant correlation between the ability of derivatives to increase the permeability of model membranes—causing the appearance of single channels in lipid bilayers or inducing calcein leakage from unilamellar vesicles—and the minimal inhibitory concentration indicated that the antifungal effect of the conjugates was due to pore formation in the membranes of target cells.

Proton Gradients as a Key Physical Factor in the Evolution of the Forced Transport Mechanism Across the Lipid Membrane.

A critical phase in the transition from prebiotic chemistry to biological evolution was apparently an asymmetric ion flow across the lipid membrane. Due to imbalance in the ion flow, the early lipid vesicles could selectively take the necessary molecules from the environment, and release the side-products from the vesicle. Natural proton gradients played a definitively crucial role in this process, since they remain the basis of energy transfer in the present-day cells. On the basis of this supposition, and the premise of the early vesicle membrane's impermeability to protons, we have shown that the emergence of the proton gradient in the lipid vesicle could be a key physical factor in the evolution of the forced transport mechanism (pore formation and active transport) across the lipid bilayer. This driven flow of protons across the membrane is the result of the electrochemical proton gradient and osmotic pressures on the integrity of the lipid vesicle. At a critical number of new lipid molecules incorporated into the vesicle, the energies associated with the creation of the proton gradient exceed the bending stiffness of the lipid membrane, and overlap the free energy of the lipid bilayer pore formation.

Structural basis of complement membrane attack complex formation.

In response to complement activation, the membrane attack complex (MAC) assembles from fluid-phase proteins to form pores in lipid bilayers. MAC directly lyses pathogens by a ‘multi-hit' mechanism; however, sublytic MAC pores on host cells activate signalling pathways. Previous studies have described the structures of individual MAC components and subcomplexes; however, the molecular details of its assembly and mechanism of action remain unresolved. Here we report the electron cryo-microscopy structure of human MAC at subnanometre resolution. Structural analyses define the stoichiometry of the complete pore and identify a network of interaction interfaces that determine its assembly mechanism. MAC adopts a ‘split-washer' configuration, in contrast to the predicted closed ring observed for perforin and cholesterol-dependent cytolysins. Assembly precursors partially penetrate the lipid bilayer, resulting in an irregular β-barrel pore. Our results demonstrate how differences in symmetric and asymmetric components of the MAC underpin a molecular basis for pore formation and suggest a mechanism of action that extends beyond membrane penetration.

Carbon Nanotube Porins: Biomimetic Membrane Pore Channels for Nanofluidic Studies

Living systems control transport of ions or small molecules across biological membranes using ion channels that form pores in lipid bilayers. Although bottom-up synthesis and top-down fabrication could produce pores of comparable size, an unresolved challenge remains to build a simplified nanopore scaffolds that fully replicate transport properties of membrane channels. Membrane pores formed by ultra-short carbon nanotubes (CNTs) of sub-2 nm diameter assembled in the lipid membranes have transport properties that come remarkably close to that goal. The defining features of these nanostructures are their inner pores that have atomically smooth hydrophobic walls, which can confine water on a molecular level, and, in some cases, down to a single-file configuration. We present experimental results that explore the physical origins of efficient transport in CNT porins, and focus on the role that molecular confinement plays in determining the transport characteristics and selectivity for water, protons, and ions. Overall, CNT porins represent a simplified biomimetic system that is ideal for studying fundamentals of nanofluidic transport and transport in biological channels, and for building complex engineered mesoscale structures.

Nucleobase Recognition by Truncated α-Hemolysin Pores.

The α-hemolysin (αHL) protein nanopore has been investigated previously as a base detector for the strand sequencing of DNA and RNA. Recent findings have suggested that shorter pores might provide improved base discrimination. New work has also shown that truncated-barrel mutants (TBM) of αHL form functional pores in lipid bilayers. Therefore, we tested TBM pores for the ability to recognize bases in DNA strands immobilized within them. In the case of TBMΔ6, in which the barrel is shortened by ∼16 Å, one of the three recognition sites found in the wild-type pore, R1, was almost eliminated. With further mutagenesis (Met113 → Gly), R1 was completely removed, demonstrating that TBM pores can mediate sharpened recognition. Remarkably, a second mutant of TBMΔ6 (Met113 → Phe) was able to bind the positively charged β-cyclodextrin, am7βCD, unusually tightly, permitting the continuous recognition of individual nucleoside monophosphates, which would be required for exonuclease sequencing mediated by nanopore base identification.

Testing the limits of rational design by engineering pH sensitivity into membrane-active peptides

In this work, we sought to rationally design membrane-active peptides that are triggered by low pH to form macromolecular-sized pores in lipid bilayers. Such peptides could have broad utility in biotechnology and in nanomedicine as cancer therapeutics or drug delivery vehicles that promote release of macromolecules from endosomes. Our approach to rational design was to combine the properties of a pH-independent peptide, MelP5, which forms large pores allowing passage of macromolecules, with the properties of two pH-dependent membrane-active peptides, pHlip and GALA. We created two hybrid sequences, MelP5_Δ4 and MelP5_Δ6, by using the distribution of acidic residues on pHlip and GALA as a guide to insert acidic amino acids into the amphipathic helix of MelP5. We show that the new peptides bind to lipid bilayers and acquire secondary structure in a pH-dependent manner. The peptides also destabilize bilayers in a pH-dependent manner, such that lipid vesicles release the small molecules ANTS/DPX at low pH only. Thus, we were successful in designing pH-triggered pore-forming peptides. However, no macromolecular release was observed under any conditions. Therefore, we abolished the unique macromolecular poration properties of MelP5 by introducing pH sensitivity into its sequence. We conclude that the properties of pHlip, GALA, and MelP5 are additive, but only partially so. We propose that this lack of additivity is a limitation in the rational design of novel membrane-active peptides, and that high-throughput approaches to discovery will be critical for continued progress in the field.

Mimicking Biology with Nanomaterials: Carbon Nanotube Porins in Lipid Membranes

Living systems control transport of ions or small molecules across biological membranes using ion channels that form highly efficient and selective pores in lipid bilayers. Although bottom-up synthesis and top-down fabrication could produce pores of comparable size, an unresolved challenge remains to build nanopore scaffolds that fully replicate transport properties of membrane channels. We will show that pores formed by ultra-short carbon nanotubes (CNTs) assembled in the lipid membranes have transport properties that come remarkably close to that goal. These CNT porins can transport water, protons, small ions, and DNA and their ion-rejection properties can be controlled by the charge at the pore mouth. Interestingly, these pores also display the stochastic “gating” behavior common for biological ion channels. Overall, CNT porins represent a simplified biomimetic system that is ideal for studying fundamentals of transport in biological channels, and for building engineered mesoscale structures, such as artificial cells.

Nanopore sequencing: from imagination to reality.

DNA sequencing and hence genomics have been transformed over the last decade by the commercialization of inexpensive, massively parallel, short-read sequencing technology. Nonetheless, a new generation of single-molecule DNA sequencers, which uses nanopore technology, is initiating a further upheaval in genomics. These instruments are portable, capable of reads of >100 kb, cheap, and fast. Nanopore sequencing, a huge technical challenge, took >25 years to develop. Today's availability of a commercial nanopore sequencing device can be traced to the 1990s, when nucleic acid translocation through nanopores was first observed, stochastic sensing was developed, and the high-resolution structure of a protein nanopore was solved. The nanopore platform that has been developed is also capable of the single-molecule detection of a wide variety of additional analytes of medical interest, ranging from small molecules to posttranslationally modified proteins. When my group began work on the α-hemolysin (αHL)2 pore in the 1980s (1), the possibility of nanopore sequencing was not on our agenda. Following the molecular characterization of the pore by pioneers including Sidney Harshman and Sucharit Bhakdi, we sought to investigate its mechanism of assembly. αHL is secreted by Staphylococcus aureus as a monomeric water-soluble 293–amino acid protein that forms an oligomeric pore in lipid bilayers. To us, this appeared to be a relatively simple system from which basic principles in membrane protein assembly might be learned. Over the years, this has indeed proved to be the case. In particular, the prepore concept, in which an oligomer forms on a membrane surface before penetrating the bilayer, has proved to be generally applicable to pore-forming proteins (2). Nonetheless, in the late 1980s, we began to think about applications of protein pores in biotechnology. Our ideas included the incorporation of nanopores into filters for rapid purifications and separations, the permeabilization of cells both to …

Line tension and structure of through pore edge in lipid bilayer

Theoretical model of structure of through pore in lipid bilayer is developed. We assumed that hydrophobic void can appear between monolayers of the membrane. The void is supposed to be filled by organic solvent or low-polarity impurities, which are usually present in artificial and cell membranes. The pore edge was divided to three regions: two monolayer and one bilayer, which surfaces were assumed continuously conjugated. The line tension of the edge was calculated in the framework of theory of elasticity of liquid crystals adapted to lipid membranes. The energy of boundary of hydrocarbon lipid chains with the void was also taken into account. We calculated the pore edge line tension for different volumes of the void. It appeared that at low surface tension at the void’s boundary the line tension decreases for increasing void volume. For zero volume the obtained line tension value is 6.8 pN, which is in accordance with available experimental data.