Polyvinyl Caprolactam-polyvinyl Acetate-polyethylene Glycol Graft Research Articles

Berberine-Loaded PVCL-PVA-PEG Self-Assembled Micelles for the Treatment of Liver Fibrosis.

Liver fibrosis is a necessary pathological process in many chronic liver diseases. Studies have shown that the progression of chronic liver disease can be slowed by rational intervention in hepatic fibrosis. Berberine (BBR), a natural extract of Phellodendron amurense, inhibits the development of liver fibrosis through several mechanisms. However, the clinical application of BBR is limited due to its low solubility. Drug delivery systems have been developed to improve the solubility of hydrophobic drugs and increase their efficacy in treating the liver fibrosis. In this study, a biocompatible nanomicelle was constructed by thin-film dispersion method using polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer (PVCL-PVA-PEG) as a carrier to encapsulate BBR (PVCL-PVA-PEG/BBR-MCs) to improve the solubility of BBR and reduce the systemic side effects. The ability to inhibit HSC-T6 cell activation of PVCL-PVA-PEG/BBR-MCs was evaluated in vitro. The anti-hepatic fibrosis effects of PVCL-PVA-PEG/BBR-MCs were investigated in vivo. PVCL-PVA-PEG/BBR-MCs have a uniform spherical shape with a mean particle size of 60.04 ± 0.027 nm and a potential of 1.49 ± 0.32 mV. It had an encapsulation efficiency of 98.52% ± 0.70 and drug loading content of 6.16% ± 0.04. Compared to free BBR, PVCL-PVA-PEG/BBR-MCs significantly inhibited HSC-T6 cell activation and TGF-β1-induced HSC-T6 cell migration in vitro. In vivo biodistribution experiments showed significantly improved hepatic distribution of PVCL-PVA-PEG/DiD-MCs compared to free DiD, suggesting that PVCL-PVA-PEG micelles enhance the ability of BBR to enter the liver and improve therapeutic efficacy. After treatment, PVCL-PVA-PEG/BBR-MCs significantly improved fibrotic liver structure and reduced collagen deposition in comparison to the CCl4-treated group; the treatment outcome was more effective than that of the free BBR group. Our results demonstrate the advantages of encapsulating BBR in PVCL-PVA-PEG micelles and highlight the potential of PVCL-PVA-PEG/BBR-MCs as a therapeutic strategy for the treatment of liver fibrosis.

Characterization, stability, and skin application of astaxanthin particulates

PurposeAstaxanthin (AX), commonly used for dermal applications, exhibits anti-inflammatory and antioxidant activities; however, it has poor water solubility. In this study, we investigated the physicochemical properties of AX-containing particulates formulated using the amphiphilic graft copolymer Soluplus (polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer: Sol) and polyethylene glycol-2000 (PEG 2000); in addition, the stability and skin applications of AX particulates were investigated.MethodsAX, Sol, and PEG were mixed by weight to prepare AX particles using the hydration method. The prepared particles were subjected to stability evaluations including particle size distribution, zeta potential estimation, and fluorescence spectroscopy as well as physical evaluations including 1H-1H NOESY NMR spectral measurement, powder X-ray diffraction, and differential scanning calorimetry. Functional evaluations included singlet oxygen scavenging, skin permeation test, and fluorescence microscopy.ResultsRelatively stable particles of Sol/AX and Sol/PEG 2000/AX, approximately 100 nm and 125 nm in size, respectively, were formed at a mixed weight ratio (9/1) of 0.1 M Ascorbic Acid solution (0.1 M ASC) and a mixed weight ratio (8/1/1) of 0.1 M ASC, respectively, at 25 °C after storage for 14 days under light-shielded condition. Stability evaluations revealed a decrease in fluorescence intensity and color fading for Sol/AX = 9/1 and Sol/PEG 2000/AX = 8/1/1 (dispersion medium: distilled water); however, no change in fluorescence intensity of AX was observed immediately after preparation in Sol/AX = 9/1 and Sol/PEG 2000/AX = 8/1/1 (dispersion medium: 0.1 M ASC). The fluorescence intensity of AX did not fluctuate significantly immediately after adjustment, and the particles remained stable, showing a bright orange color with time. NMR spectra of Sol/AX = 9/1 and Sol/PEG 2000/AX (dispersion medium: 0.1 M ASC) showed the interactions between the CH3 group e from Sol (1.8 ~ 2.0 ppm) and the CH groups H-15,11 from AX (6.7 ~ 6.8 ppm), 8’,12’ (6.4 ~ 6.5 ppm), H-10,14 (6.4 ~ 6.5 ppm), and 7,7’ (6.2 ~ 6.3 ppm), indicating the disappearance of cross peaks. Furthermore, new cross peaks were identified for the CH3 group e of Sol (1.8 ~ 2.0 ppm), the 7-membered ring z of Sol (1.5 ~ 1.8 ppm), the 5-membered ring S of ASC (3.5 ~ 3.6 ppm), the CH group T (3.8 ~ 3.9 ppm), and the CH group U (4.7 ppm). Fluorescence microscopy observations of microparticles formulated with Sol/PEG 2000/AX showed a slight improvement in skin penetration.ConclusionNew AX particulates were formed using Sol/PEG 2000/AX = 8/1/1, suggesting that Sol/PEG 2000/AX maintained the stability and improved the skin penetration of AX.

Antimicrobial, Probiotic, and Immunomodulatory Potential of Cannabis sativa Extract and Delivery Systems.

The compounds present in hemp show multidirectional biological activity. It is related to the presence of secondary metabolites, mainly cannabinoids, terpenes, and flavonoids, and the synergy of their biological activity. The aim of this study was to assess the activity of the Henola Cannabis sativae extract and its combinations with selected carriers (polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer, magnesium aluminometasilicate, and hydroxypropyl-β-cyclodextrin) in terms of antimicrobial, probiotic, and immunobiological effects. As a result of the conducted research, the antimicrobial activity of the extract was confirmed in relation to the following microorganisms: Clostridium difficile, Listeria monocytogenes, Enterococcus faecalis, Staphylococcus aureus, Staphylococcus pyrogenes, Escherichia coli, Klebsiella pneumoniae, Salmonella typhimurium, Pseudomonas aereuginosa, and Candida albicans (microorganism count was reduced from ~102 CFU mL-1 to <10 CFU mL-1 in most cases). Additionally, for the system with hydroxypropyl-β-cyclodextrin, a significant probiotic potential against bacterial strains was established for strains Lactobacillus acidophilus, Lactobacillus casei, Lactobacillus plantarum, Lactobacillus brevis, Lactobacillus rhamnosus, Lactobacillus reuteri, Pediococcus pentosaceus, Lactococcus lactis, Lactobacillus fermentum, and Streptococcus thermophilus (microorganism count was increased from ~102 to 104-107). In terms of immunomodulatory properties, it was determined that the tested extract and the systems caused changes in IL-6, IL-8, and TNF-α levels.

Purging myeloma cell contaminants and simultaneous expansion of peripheral blood-mobilized stem cells

Human hematopoietic stem cells (HSCs) are widely used as a cellular source for hematopoietic stem cell transplantation (HSCT) in the clinical treatment of hematological malignancies. After transplantation therapy, delays in hematopoietic recovery due to insufficient donor-derived HSCs can lead to increased risks of life-threatening infections and bleeding. Our previous studies developed an efficient ex vivo expansion culture medium (3a medium) for umbilical cord blood-derived HSCs (CBSCs), offering a potential solution to this problem. Nevertheless, the broader applicability of our culture method to alternative cell sources and, of greater significance, its efficacy in eliminating potentially disease-associated contaminated tumor cells, especially in autologous transplantation, raise critical clinical questions. In this study, we modified the 3a medium by incorporating UM729 to replace UM171, adding FMS-like tyrosine kinase 3 (Flt3) ligand, and adjusting the concentrations of butyzamide, 740Y-P, polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer (PCL-PVAc-PEG, Soluplus) to create the modified-3a medium. This sophistication allowed the efficient expansion of not only CBSCs but also peripheral blood-mobilized HSCs (PBSCs). Additionally, we successfully removed contaminated myeloma cells by adding bortezomib and tumor necrosis factor (TNF)-related apoptosis-inducing ligand (TRAIL) at appropriate concentrations, although we maintained HSCs through the addition of lenalidomide. Our research findings present the potential for widespread clinical application of the modified-3a medium and suggest a safe ex vivo culture technique for expanding human HSCs within peripheral blood-derived donor grafts used for autologous HSCT.

TPGS/soluplus® blended micelles: an effective strategy for improving loading capacity of ferroptosis inducer erastin

Erastin is the most classical small molecular ferroptosis inducer but its clinical application is hindered due to its poor solubility. Nanotechnology has been used to improve ferroptosis inducer erastin’s solubility. The recently reported erastin-incorporated nanosystems (e.g., nanoparticulate ferritin, poly(ethylene glycol) methyl ether-blockpoly(lactide-co-glycolide) (mPEG-PLGA) nanoparticle, exosome, and liposome) could to some degree elevate its solubility, but were still poor in loading capacity. To be specific, the maximum entrapment efficiency and drug loading in previous studies were approximately 36% and 3.7%, respectively. In order to improve drug loading capacity, we constructed a novel carrier based on Vitamin E d-α-Tocopherol polyethylene glycol 1000 succinate (TPGS) and polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer (Soluplus®) blended micelles. The erastin@TPGS/Soluplus® micelles were prepared by thin film hydration method, and formulation details including dosage of Soluplus®, the weight ratio of TPGS to Soluplus®, the weight ratio of erastin to TPGS/Soluplus® were optimized. The physicochemical properties of the erastin micelles were measured by DLS, TEM, FTIR, and TG-DSC analysis. The products exhibited a nanoscale and uniform particle size (78.11 ± 0.54 nm) and neutral surface charge (-0.43 ± 0.32 mV). Significantly improved entrapment efficiency (89.63 ± 1.81%) and drug loading rate (10.03 ± 0.14%) were obtained, which was over 2-fold of current reports. The in vitro release study demonstrated that erastin could release in a sustained yet complete manner, and the drug release might be governed by multiple mechanisms including anomalous diffusion of non-Fickian diffusion, matrix erosion and sustained release. In summary, this proposed erastin nanosystem provides a new strategy for improving loading capacity, and may probably augment ferroptosis-inducing therapy for cancer treatment.

Loratadine oral bioavailability enhancement via solid dispersion loaded oro-dispersible films: Formulation, characterization and pharmacokinetics.

Loratadine (LRD) belongs to second-generation tricyclic H1 antihistamine class, known for its non-sedating properties in allergic reactions. H1 antihistamines avoid and block the responses to allergens or histamine in nose and conjunctivae, thereby abolishing itching, congestion and sneezing. LRD is a Biopharmaceutical Class System (BCS) class II drug with dissolution or solubility limited absorption which limited the oral bioavailability and therapeutic efficacy of LRD. To improve the oral bioavailability of LRD for allergic disease (urticaria) treatment, LRD solid dispersions (LRD-SDs) were integrating into oro-dispersible films (ODFs). LRD-SDs were prepared through hot-melt extrusion method (HME) using d-alpha-tocopherol polyethylene glycol 1000 succinate (TPGS-1000), and polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer (SP). Subsequently, LRD-SDs were incorporated in ODFs by solvent casting method. The physicochemical and mechanical properties of LRD solid dispersions-loaded oro-dispersible films (LRD-SDs-ODFs), were evaluated. The in-vitro dissolution, ex-vivo permeation, oral bioavailability, and pharmacodynamics studies were conducted to evaluate LRD-SDs-ODFs efficiency. LRD-SDs-ODFs showed superior solubility and in-vitro dissolution results compared to that of pure LRD (p<0.05). The solubility of the LRD-SD coded as LTS-4 was 190 times higher than the pure drug in aqueous media. The average hydrodynamic particle size (PS), polydispersity index (PDI), and zeta potential (ZP) of SD particles were 76±2.1nm, 0.20±0.08 and -19.16±1.4mV, respectively. Moreover, differential scanning calorimetry (DSC) and X-ray diffraction (XRD) results confirmed the amorphousness of LRD in LRD-SDs-ODFs. The permeability flux of LRD was 44.6±3.1μg/cm2/h from DPF-5 formulation. Likewise, in vivo oral bioavailability of DPF-5 in Sprague-Dawley rats was significantly increased (p<0.05) compared to free LRD. Further, wheal area was reduced 20 % higher than LRD in 8h (p<0.05). Overall, LRD-SDs-ODFs considerably enhanced LRD solubility, dissolution rate, bioavailability, and antihistaminic efficacy. Our findings show that SDs-ODFs is an effective carrier system for delivering poorly soluble LRD.

Characterization and Evaluation of Rapamycin-Loaded Nano-Micelle Ophthalmic Solution.

Rapamycin-loaded nano-micelle ophthalmic solution (RAPA-NM) offers a promising application for preventing corneal allograft rejection; however, RAPA-NM has not yet been fully characterized. This study aimed to evaluate the physicochemical properties, biocompatibility, and underlying mechanism of RAPA-NM in inhibiting corneal allograft rejection. An optimized RAPA-NM was successfully prepared using a polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol (PVCL-PVA-PEG) graft copolymer as the excipient at a PVCL-PVA-PEG/RAPA weight ratio of 18:1. This formulation exhibited high encapsulation efficiency (99.25 ± 0.55%), small micelle size (64.42 ± 1.18 nm), uniform size distribution (polydispersity index = 0.076 ± 0.016), and a zeta potential of 1.67 ± 0.93 mV. The storage stability test showed that RAPA-NM could be stored steadily for 12 weeks. RAPA-NM also displayed satisfactory cytocompatibility and high membrane permeability. Moreover, topical administration of RAPA-NM could effectively prevent corneal allograft rejection. Mechanistically, a transcriptomic analysis revealed that several immune- and inflammation-related Kyoto Encyclopedia of Genes and Genomes (KEGG) pathways were significantly enriched in the downregulated genes in the RAPA-NM-treated allografts compared with the rejected allogenic corneal grafts. Taken together, these findings highlight the potential of RAPA-NM in treating corneal allograft rejection and other ocular inflammatory diseases.

Formulation and characterization of orodispersible tablet of glimepiride.

The present study is regarding, Glimepiride is one derivatives of sulfonyl urea used in the treatment of Type II DM which classified as class-II (BCS) of high permeability and low degree of solubility. The endeavor is to improve its solubility by solvent vaporization method to enhance the rate of dissolution of glimepiride. Soluplus (Polyvinyl caprolactampolyvinyl acetate-polyethylene glycol graft co-polymer), PVP k40 (Polyvinylpyrrolidone) and PEG k5 are blended with the drug in various proportions (1:1,1:3) and prepared Soluplus1, Soluplus2, PEG1, PEG2, PVP1 and PVP2 as solid dispersion. The optimized formula of solid dispersion PVP1 is added to sodium starch glycolate and cross-carmellose. The disintegration profile will appear diminished in the drug release from the dosage form at a determined period of time. Differential scanning calorimetry appeared to a reduction in its crystallinity in solid dispersions. Scanning electron microscope and particle size analysis show a reduction in the drug particle size as solid dispersions. Fourier transform infrared spectroscopy does not show an interaction between them. Hence, that PVP1 batch will be considered from nine oral dissolving tablets dosage form. Finally, orally disintegrating tablets are estimated for various parameters; for instance, disintegration time, the content of the drug, wetting time, and in vitro release profile show a conventional result. The selected formula F6 shows a good result in disintegration time during 13-second and in-vitro drug release profile achieves 96% at the end of 40 minutes.

Preparation of a camptothecin analog FLQY2 self-micelle solid dispersion with improved solubility and bioavailability

Background7-p-trifluoromethylphenyl-FL118 (FLQY2) is a camptothecin analog with excellent antitumor efficacy against various solid tumors. However, its poor solubility and low bioavailability limited the development of the drug. Polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer (Soluplus®), an emerging carrier for preparing solid dispersion (SD), encapsulated FLQY2 to circumvent the above limitations.ResultsIn this project, FLQY2-SD was prepared by solvent evaporation method and self-assembled into micelles in aqueous solutions owing to the amphiphilic nature of Soluplus®. The physicochemical characterizations demonstrated that FLQY2 existed in a homogeneous amorphous form in SD and was rapidly dissolved. The micelles did not affect cytotoxicity or cellular uptake of FLQY2 in vitro, and the oral bioavailability was increased by 12.3-fold compared to the FLQY2 cyclodextrin suspension. The pharmacokinetics of FLQY2-SD showed rapid absorption, accumulation in the intestine, and slow elimination via fecal. Metabolite identification studies showed 14 novel metabolites were identified, including 12 phase I metabolites (M1–M12) and 2 phase II metabolites (M13–M14), of which M2 (oxidation after decarboxylation) and M7 (dioxolane ring cleavage) were the primary metabolites in the positive mode and negative mode, respectively. The tumor growth inhibition rate (TGI, 81.1%) of FLQY2-SD (1.5 mpk, p.o./QW) in tumor-bearing mice after oral administration was higher than that of albumin-bound Paclitaxel (15 mpk, i.v./Q4D) and Irinotecan hydrochloride (100 mpk, i.p./QW).ConclusionsThe successful preparation, pharmacokinetics, and pharmacodynamics studies of FLQY2-SD showed that the solubility and bioavailability of FLQY2 were improved, which facilitated the further druggability development of FLQY2.Graphical

Soluplus® polymeric nanomicelles improve solubility of BCS-class II drugs

The issue of poor aqueous solubility is often a great hitch in the development of liquid dosage forms for those drugs that the Biopharmaceutics Classification System (BCS) includes in classes II and IV. Among the possible technological solutions, inclusion of the drug molecule within polymeric micelles, and particularly nanomicelles, has been proposed in the last years as a valid strategy. Our attention has been recently attracted by Soluplus®, an amphiphilic polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer able to form small and stable nanomicelles. The aim of this study was to characterize Soluplus® nanomicelles to enhance the apparent solubility of three model APIs, categorized in BCS class II: ibuprofen (IBU), idebenone (IDE), and miconazole (MIC). Drug-loaded Soluplus® micelles with a mean size around 60–70 nm were prepared by two methods (direct dissolution or film hydration method). The prepared nanosystems were characterized in terms of mean particle size and Zeta potential, physical stability, drug solubility, and in vitro drug release. The solubility of the tested APIs was shown to increase linearly with the concentration of graft copolymer. Soluplus® can be easily submitted to membrane filtration (0.2 µm PES or PTFE membranes), showing the potential to be sterilized by this method. Freeze-drying enabled to obtain powder materials that, upon reconstitution with water, maintained the initial micelle size. Finally, viscosity studies indicated that these nanomicelles have potential applications where a bioadhesive material is advantageous, such as in topical ocular administration.Graphical abstract

Revealing the roles of polymers in supersaturation stabilization from the perspective of crystallization behaviors: A case of nimodipine

Formulating drugs into amorphous solid dispersions (ASDs) represents an attractive means to enhance the aqueous solubility of drugs. Furthermore, water-soluble polymers have proven highly advantageous for stabilizing supersaturated solutions of ASDs. However, the performance and mechanism of various polymers in stabilizing supersaturated drug solutions have not been well-studied. The aim of this study was to investigate the effects of different commercial polymers on the dissolution behaviors and supersaturation stabilization of the ASDs and to further explore the mechanism of polymer mediated supersaturation maintenance by studying the crystallization behaviors of the ASDs. In this study, nimodipine (NMD) was used as a model drug because of its poor water-solubility and fast crystallization rate in aqueous solution, and three polymers polyvinylpyrrolidone (PVP), vinylpyrrolidone-vinyl acetate copolymer (PVP VA), and polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft co-polymer (Soluplus) was selected as the drug carriers to form the ASDs with NMD. Solid-state characterizations of the ASDs confirmed the amorphous state of the ASD systems. ASDPVP VA demonstrated superior supersaturation maintenance in dissolution experiments compared to the other two ASD systems. Among the polymers tested, PVP VA most efficiently maintained dissolution of NMD and prevented its crystallization from the supersaturated solution. The ability of PVP VA to most-effectively maintain supersaturation of the drug was manifested by inhibition of crystal nucleation rather than inhibition of crystal growth following nucleation. These results suggest that nucleation inhibition was instrumental in enabling the polymer-mediated supersaturation maintenance, at least with NMD.

Development of quercetin-loaded PVCL–PVA–PEG micelles and application in inhibiting tumor angiogenesis through the PI3K/Akt/VEGF pathway

Quercetin (Que) exhibits excellent biological activity; however, its clinical development is hindered owing to the poor water solubility. In this study, Que. was loaded on polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer (PVCL–PVA–PEG, Soluplus) micelles through a thin-film hydration process, and their tumor angiogenesis inhibition ability was investigated. The particle size of Soluplus-Que micelles was 55.3 ± 1.8 nm, and the micelles stayed stability within 9 months. Soluplus-Que micelles can enhance the cell uptake of Que. and transport the micelles to intracellular lysosomes and mitochondria. The MTT assay results revealed that Soluplus-Que micelles enhanced the cytotoxicity of Que. on HUVEC cells. Furthermore, Soluplus-Que micelles inhibited migration and invasion of HUVEC cells, as well as inhibited the neovascularization of chick embryo allantoic membrane (CAM). The in vivo study revealed that Soluplus-Que micelles significantly inhibit the growth of H22 solid tumors, with low toxic side effects. Soluplus-Que inhibited the expression of CD31 (a marker of angiogenesis) and the PI3K/Akt/VEGF pathway in tumor tissues, indicating its potential to hold back tumor growth via the inhibition of angiogenesis. Our findings indicated that as a delivery system, Soluplus micelles demonstrate potential for the delivery of poorly soluble drugs for tumor treatment.

Polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft co-polymer based controlled release tablets of aceclofenac to simultaneously enhance the solubility and bioavailability

The aim of this study was to enhance the solubility of Aceclofenac with a new polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft co-polymer (Soloplus®) and formulate it in controlled release (CR) tablet dosage form by direct compression method with HPMC K-15. Solid dispersions were prepared in different ratio of Aceclofenac and Soloplus® as F1, F2 and F3 with different polymer ratios i.e. 30%, 50%, and 70% respectively. All the quality control tests were performed for the prepared controlled release tablets. Drug polymer interaction studies of Aceclofenac and Soloplus® were carried using FTIR and XRD. Dissolution study was carried out against Alkaris® as a standard reference. The formulation F3 showed optimum results and followed zero order kinetics. The Soloplus® improved the solubility of the drug and the CR formulation enhanced the delivery in a sustained manner. Hence, the CR formulation enhanced the delivery of aceclofenac in a sustained manner, thereby an efficient drug delivery may lead to an effective anti-inflammatory activity.

Enhancement of oral bioavailability and anti-hyperuricemic activity of aloe emodin via novel Soluplus®-glycyrrhizic acid mixed micelle system.

The objective of this study was to fabricate a novel drug delivery system using Soluplus® (polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer) and glycyrrhizic acid to improve solubility, bioavailability, and anti-hyperuricemic activity of aloe emodin (AE). The AE-loaded mixed micelles (AE-M) were prepared by thin-film hydration method. The optimal AE-M contained small-sized (30.13 ± 1.34nm) particles with high encapsulation efficiency (m/m, %) of 90.3 ± 1.08%. The release rate of AE increased in the micellar formulation than that of free AE in the four media (DDW, pH 7.0; phosphate buffer solution, pH 7.4; phosphate buffer solution, pH 6.8; and hydrochloric acid aqueous solution, pH 1.2). In comparison to free AE, the pharmacokinetic study of AE-M showed that its relative oral bioavailability increased by 3.09 times, indicating that mixed micelles may promote gastrointestinal absorption. More importantly, AE-M effectively reduced uric acid level by inhibiting xanthine oxidase (XOD) activity in model rats. The degree of ankle swelling, serum levels of interleukin (IL)-1, and IL-6-related inflammatory factors levels all decreased in the gouty arthritis model established via monosodium urate (MSU) crystals. Taken together, the AE-M demonstrated the potential to improve the bioavailability, anti-hyperuricemic activity, and anti-inflammation of AE.

Ciprofloxacin self-dissolvable Soluplus based polymeric films: a novel proposal to improve the management of eye infections.

Infections of the eye are among the leading causes of vision impairment and vision loss worldwide. The ability of a drug to access the anterior parts of the eye is negligible after systemic administration. Effective drug delivery to the eye is a major challenge due to the presence of protective mechanisms and physiological barriers that result in low ocular availability after topical application. The main purpose of this work was the improvement of the corneal and conjunctival permeation of the antibiotic Ciprofloxacin, a wide spectrum antibiotic used for the most common eye infection, using a self-dissolving polymeric film. Films were prepared by the solvent casting technique, using polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft co-polymer (Soluplus), polyvynyl alcohol, and propylene glycol. Films were homogeneous in drug content and thickness, as demonstrated by adapting the Swiss Roll technique followed by microscopy observation. These films proved in vitro to control the release of the Ciprofloxacin. Ex vivo permeability studies using Franz diffusion cells and porcine cornea and sclera showed an effective permeability of the drug without inducing irritation of the tissues. Films swelled in contact with artificial tears forming an in situ gel over 20 min, which will improve drug contact and reduce the need of multiple dosing. The antibiotic activity was also tested in vitro in five types of bacterial cultures, assuring the pharmacological efficacy of the films. The developed films are a promising drug delivery system to topically treat or prevent ocular infections.Graphical abstract

Characterizing Drug-Polymer Interactions in Aqueous Solution with Analytical Ultracentrifugation.

We present a new approach for characterizing drug-polymer interactions in aqueous media, using sedimentation velocity analytical ultracentrifugation (AUC). We investigated the potential interaction of ketoconazole (KTZ), a poorly water-soluble drug, with polyacrylic acid (PAA) and a polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer (Soluplus) in aqueous buffers. The effect of the polymer on the sedimentation coefficient of the drug was the observable metric. The drug alone, when subjected to AUC, exhibited a very narrow sedimentation peak at 0.2 Svedberg (S), in agreement with the expectation for a monomeric drug with a molar mass < 1000 Dalton. Conversely, the neat polymers showed broad profiles with higher sedimentation coefficients, reflecting their larger more heterogeneous size distributions. The sedimentation profiles of the drug-polymer mixtures were expectedly different from the profile of the neat drug. With KTZ-Soluplus, a complete shift to faster sedimentation times (indicative of an interaction) was observed, while with KTZ-PAA, a split peak indicated the existence of the drug in both free and interacting states. The sedimentation profile of carbamazepine, a second model drug, in the presence of hydroxypropyl methyl cellulose acetate succinate (HPMCAS, another polymer) revealed multiple "populations" of drug-polymer species, very similar to the sedimentation profile of neat HPMCAS. The interactions probed by AUC were compared with the results from isothermal titration calorimetry. In vitro dissolution tests performed on amorphous solid dispersions prepared with the same drug-polymer pairs suggested that the interactions may play a role in prolonging drug supersaturation. The results show the possibility of characterizing drug-polymer interactions in aqueous solution with high hydrodynamic resolution, addressing a major challenge frequently encountered in the mechanistic investigations of the dissolution behavior of amorphous solid dispersions.

Development and in vitro evaluation of mucoadhesive gelatin films for the vaginal delivery of econazole.

Several strategies have been explored to obtain effective econazole nitrate (ECN) concentrations at the site of application for a prolonged time. In this paper, different gelatin-based film formulations for vaginal application were investigated, containing ECN (10% w/w with respect to gelatin) as pure drug or as drug-solid dispersions (SD). For the production of SD, different polymers were evaluated: polyvinylpyrrolidone (PVP), Soluplus® (polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer) and Gelucire® 50/13 (mixture of mono-, di- and triglycerides of fatty acids, esters of PEG 1500 and free PEG). Gelucire®-SD showed the best solubility enhancement, increasing 9.2 times the ECN solubility in pH 4.5 solution respect to pure drug; DSC and XRD analysis confirmed the crystalline form of the drug. XRD results evidenced that all gelatin-based films, containing either the drug or the SD, underwent the topotactic transformation of ECN into crystalline econazole (EC), owing to a strong interaction between the drug and the gelatin. Films containing Gelucire®-based SD displayed lower brittleness and rigidity with respect to the other samples; moreover they demonstrated good structural integrity after 24h of incubation in the acidic solution (swelling degree of about 350%). Then, Gelucire®-SD based films were compared with the corresponding formulations cross-linked by genipin (2% w/w). The addition of genipin did not interfere with the drug-gelatin interaction. Gelucire®-SD based films showed similar release profiles to neat gelatin films, enhancing the drug release in the first 5h and controlling the EC release over time, avoiding the use of a crosslinking additive. Finally, gelatin films containing Gelucire® solid dispersion displayed good adhesiveness and anti-Candida activity. Overall, results support the potential use of this film formulation as noncytotoxic EC delivery system for the treatment of vaginal candidiasis.

Binary polymeric amorphous carvedilol solid dispersions: In vitro and in vivo characterization

Binary polymeric amorphous carvedilol solid dispersions were prepared using solvent method by varying solvent type, polymer type and carvedilol to polymer ratio in order to assess the influence of these factors and maximize carvedilol dissolution rate. Low and high molecular weight polyvinylpyrrolidone, polyvinylpyrrolidone-vinyl acetate copolymer and polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer were used as polymeric carriers in carvedilol to polymer ratios 1:1, 1:2 or 1:4, while absolute ethanol or acetone were used as solvents. Hard gelatin capsules were prepared with carvedilol solid dispersion and lactose monohydrate, mannitol or microcrystalline cellulose. FTIR and PXRD were used to detect carvedilol crystallinity and identify carvedilol-polymer interactions and carvedilol polymorphs. These techniques confirmed carvedilol transition to amorphous state and suggested that hydrogen bonds were formed between carvedilol and polymer molecules. Carvedilol dissolution rate was significantly higher from solid dispersions with higher carvedilol to polymer ratio and solid dispersions prepared using the solvent in which the polymer was more soluble. Solid dispersion with polyvinylpyrrolidone-vinyl acetate copolymer in 1:4 ratio in absolute ethanol displayed the highest carvedilol dissolution rate with 91.78% carvedilol dissolved in the first 30 min. Capsules prepared with the selected solid dispersion and microcrystalline cellulose as diluent displayed the highest carvedilol dissolution rate, with 93.43% carvedilol dissolved within the first 30 min. Carvedilol bioavailability was significantly increased by formulating solid dispersions, while the analysis of serum biochemical parameters excluded damage on liver and kidney function and the lipid profile of animals exposed to investigated drug delivery system.

Direct Measurement of Lateral Molecular Diffusivity on the Surface of Supersaturated Amorphous Solid Dispersions by Atomic Force Microscopy.

Quantifying molecular surface diffusivity is of broad interest in many different fields of science and technology. In this study, the method of surface grating decay is utilized to investigate the surface diffusion of practical relevant amorphous solid dispersions of indomethacin and the polymeric excipient Soluplus (a polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer) at various polymer concentrations (1-20% w/w). The study confirms that measuring surface diffusivity below the system's glass transition temperature is possible with a simplified atomic force microscopy setup. Results highlight a striking polymer influence on the surface diffusivity of drug molecules at low polymer concentrations and a turnover point to a polymer dominated diffusion at around three percent (w/w) polymer concentration. The surface diffusion measurements further correlate well with the observed increase in physical stability of the system as measured by X-ray powder diffraction. These findings are of vital interest in both the applied use and fundamental understanding of amorphous solid dispersions.

Improving solubility and oral bioavailability of a novel antimalarial prodrug: comparing spray-dried dispersions with self-emulsifying drug delivery systems

To improve the solubility and oral bioavailability of a novel antimalarial agent ELQ-331(a prodrug of ELQ-300), spray-dried dispersions (SDD) and a self-emulsifying drug delivery system (SEDDS) were developed. SDD were prepared with polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer (Soluplus®) polymer carrier and Aeroperl® 300 Pharma and characterized by differential scanning calorimetry, powder X-ray diffraction. For SEDDS, solubility in oils, surfactants, and co-surfactants was determined and ternary phase diagram was constructed to show self-emulsifying area. SEDDS were characterized for spontaneous emulsification and droplet size distribution. The amorphous ELQ-331 SDD improved the solubility to 10× in fast-state simulated intestinal fluid and addition of sodium lauryl sulphate externally to SDDs further improved the solubility to ∼28.5× versus non-formulated drug. SEDDS had good self-emulsifying characteristics with small emulsion droplet sizes and narrow particle distribution. Oral pharmacokinetic studies for SDD and SEDDS formulations were performed in rats. The ELQ-331 rapidly converted to ELQ-300 soon after oral administration in rats. Exposure levels of ELQ-300 were about 1.4-fold higher (based on AUC) in SEDDS than SDD formulations. Poorly soluble drugs like ELQ-331 can be formulated using SDD or SEDDS to improve solubility and oral bioavailability.