Polyvinyl Alcohol-polyethylene Glycol Graft Copolymer Research Articles

Pharmaceutical polymer-based hydrogel formulations as prospective bioinks for 3D bioprinting applications: A step towards clean bioprinting

BackgroundThree-dimensional (3D) bioprinting has emerged as a game-changer technology in tissue engineering. Bioink is a crucial component in the 3D bioprinting process and is consists of biomaterials, cells, and growth factors. Current research on bioink formulations primarily uses animal-derived biomaterials for 3D bioprinting operations and soft tissue engineering, which possess challenges of batch-to-batch variability, immunogenicity, and microbial growth with aging. ObjectiveIn this study we aimed to investigate pharmaceutical polymers as biomaterials for hydrogel formulations and examine them for prospective bioink qualities. MethodsHydrogel formulations containing partially pregelatinized starch, sodium alginate along with either of hydroxypropyl methylcellulose or polyvinyl alcohol-polyethylene glycol graft co-polymer or sodium carboxymethyl cellulose were assessed for tensile strength of thin films; the viscosity of hydrogels, the structural integrity of crosslinked scaffolds, and effects of moist heat sterilization on physical properties, chemical properties and microbial contaminations. ResultsWe found that thin films made out of hydrogels found to have tensile strength suitable for soft tissue engineering. Viscosity results meet workable ranges for extrusion-based bioprinting. Structural integrity revealed crosslinked scaffolds were able to withstand in culture medias for few days and then started to disintegrate demonstrated biodegradation patterns of diffrent formulations. The moist heat sterilization process eliminated microbial contaminations effectively without altering the physicochemical properties of the hydrogels. ConclusionWe proved pharmaceutical polymers as biomaterials in hydrogel formulations that could be used as bioinks in future. These hydrogels has appropriate qualities for 3D bioprinting and soft tissue engineering. This study paves the way for clean bioprinting, with the possibility of formulating bioinks free from animal derived biomaterials.

Investigation of polyvinyl alcohol-polyethylene glycol graft copolymer as an advanced functional polymer in the development of perampanel orodispersible film

Investigation of polyvinyl alcohol-polyethylene glycol graft copolymer as an advanced functional polymer in the development of perampanel orodispersible film

On-demand manufacturing of immediate release levetiracetam tablets using pressure-assisted microsyringe printing

Fast and accurate manufacturing of individually tailored solid dosage forms is one of the main challenges for personalized medicine. The use of 3D printers has recently been studied to determine their suitability for personalized drug manufacturing.In the current work, formulations free of organic solvents were developed for a pressure-assisted microsyringe printing method (PAM). The water soluble polymer polyvinyl alcohol-polyethylene glycol graft copolymer (PVA-PEG) was used as matrix, while levetiracetam (LEV) was used as model drug. Furthermore, the influence of a second polymer, polyvinylpyrrolidone-vinyl acetate copolymer (PVP-PVAc) on the properties of the printed tablets was investigated. Tablets were printed using a 3D-Bioplotter. The printed formulations were analyzed regarding mass variation, friability and thickness. Furthermore, the disintegration behavior and dissolution profile were analyzed. Investigations of the dissolution profiles of printed tablets show that an immediate release of the API could be achieved. For tablets with PVA-PEG the drug is released completely within 10 min while the additional use of PVP-PVAc leads to a slightly delay with a complete release within 20 min. The same trend is observed regarding the disintegration time of printed tablets. Tablets with PVA-PEG disintegrated within 95 ± 10 s while tablets with additional PVP-PVAc disintegrated within 130 ± 20 s.Friability of <0.5% indicate that the used PAM printing method provides tablets without loss of structural integrity during handling. Furthermore, it could be shown that the production of tablets with a good content uniformity using a 3D Bioplotter is suitable.

PET/CT imaging of 3D printed devices in the gastrointestinal tract of rodents

Fused deposition modelling (FDM) 3D printing (3DP) is a revolutionary technology with the potential to transform drug product design in both the pre-clinical and clinical arena. The objective of this pilot study was to explore the intestinal behaviour of four different polymer-based devices fabricated using FDM 3DP technology in rats. Small capsular devices of 8.6 mm in length and 2.65 mm in diameter were printed from polyvinyl alcohol-polyethylene glycol graft-copolymer (PVA-PEG copolymer, Kollicoat IR), hydroxypropylcellulose (HPC, Klucel), ethylcellulose (EC, Aqualon N7) and hypromellose acetate succinate (HPMCAS, Aquasolve-LG). A smaller sized device, 3.2 mm in length and 2.65 mm in diameter, was also prepared with HPMCAS to evaluate the cut off size of gastric emptying of solid formulations in rats. The devices were radiolabelled with Fluorodeoxyglucose (18F-FDG) and small animal positron emission tomography/computed tomography (microPET/CT) was used to track the movement and disintegration of the fabricated devices in the rats. The PVA-PEG copolymer and HPC devices disintegrated after 60min following oral administration. The EC structures did not disintegrate in the gastrointestinal tracts of the rats, whereas the HPMCAS-based systems disintegrated after 420 min. Interestingly, it was noted that the devices which remained intact over the course of the study had not emptied from the stomach of the rats. This was also the case with the smaller sized device. In summary, we report for the first time, the use of a microPET/CT imaging technique to evaluate the in vivo behaviour of 3D printed formulations. The manipulation of the 3D printed device design could be used to fabricate dosage forms of varying sizes and geometries with better gastric emptying characteristics suitable for rodent administration. The increased understanding of the capabilities of 3DP in dosage form design could, henceforth, accelerate pre-clinical testing of new drug candidates in animal models.

Enhanced Dissolution of a Porous Carrier–Containing Ternary Amorphous Solid Dispersion System Prepared by a Hot Melt Method

The focus of our study was to employ a solvent-free, thermal process to evaluate the use of a porous carrier in a drug-polymer-porous carrier ternary formulation containing a high drug load (e.g., ≥50% w/w). The purpose of the study was to improve the dissolution properties of the biopharmaceutical classification system class II drug, indomethacin, in the ternary formulation. The effect that the selected polymer has on properties of the formulation was studied, and the formulation characteristics of hypromellose (AF15), copovidone (VA64), and polyvinyl alcohol-polyethylene glycol graft copolymer was evaluated to understand differences in dissolution rates and drug adsorption onto the porous carrier. The ternary formulations were manufactured using a thermal technique that relied on heating and mixing, without the necessity of mechanical shear. All thermally processed granules that employed the porous carrier exhibited immediate release compared with crystalline indomethacin and physical mixtures. In addition, the ternary formulations maintained supersaturation compared with the binary formulations without polymer. The results of this study indicated that the thermally processed ternary formulations containing a porous carrier demonstrated a much improved dissolution profile in nonsink conditions.

Solid state properties and drug release behavior of co-amorphous indomethacin-arginine tablets coated with Kollicoat® Protect.

A promising approach to improve the solubility of poorly water-soluble drugs and to overcome the stability issues related to the plain amorphous form of the drugs, is the formulation of drugs as co-amorphous systems. Although polymer coatings have been proven very useful with regard to tablet stability and modifying drug release, there is little known on coating co-amorphous formulations. Hence, the aim of the present study was to investigate whether polymer coating of co-amorphous formulations is possible without inducing recrystallization. Tablets containing either a physical mixture of crystalline indomethacin and arginine or co-amorphous indomethacin-arginine were coated with a water soluble polyvinyl alcohol-polyethylene glycol graft copolymer (Kollicoat® Protect) and stored at 23°C/0% RH and 23°C/75% RH. The solid state properties of the coated tablets were analyzed by XRPD and FTIR and the drug release behavior was tested for up to 4h in phosphate buffer pH 4.5. The results showed that the co-amorphous formulation did not recrystallize during the coating process or during storage at both storage conditions for up to three months, which confirmed the high physical stability of this co-amorphous system. Furthermore, the applied coating could partially inhibit recrystallization of indomethacin during drug release testing, as coated tablets reached a higher level of supersaturation compared to the respective uncoated formulations and showed a lower decrease of the dissolved indomethacin concentration upon precipitation. Thus, the applied coating enhanced the AUC of the dissolution curve of the co-amorphous tablets by about 30%. In conclusion, coatings might improve the bioavailability of co-amorphous formulations.

Formulation, Solid State Characterization and Enhancement of Dissolution Rate of Olmesartan Medoxomil by Polyvinyl Alcohol-Polyethylene Glycol Graft Copolymer Based Nanoparticles

Formulation, Solid State Characterization and Enhancement of Dissolution Rate of Olmesartan Medoxomil by Polyvinyl Alcohol-Polyethylene Glycol Graft Copolymer Based Nanoparticles

Rapid Assessment of Tablet Film Coating Quality by Multispectral UV Imaging.

Chemical imaging techniques are beneficial for control of tablet coating layer quality as they provide spectral and spatial information and allow characterization of various types of coating defects. The purpose of this study was to assess the applicability of multispectral UV imaging for assessment of the coating layer quality of tablets. UV images were used to detect, characterize, and localize coating layer defects such as chipped parts, inhomogeneities, and cracks, as well as to evaluate the coating surface texture. Acetylsalicylic acid tablets were prepared on a rotary tablet press and coated with a polyvinyl alcohol-polyethylene glycol graft copolymer using a pan coater. It was demonstrated that the coating intactness can be assessed accurately and fast by UV imaging. The different types of coating defects could be differentiated and localized based on multivariate image analysis and Soft Independent Modeling by Class Analogy applied to the UV images. Tablets with inhomogeneous texture of the coating could be identified and distinguished from those with a homogeneous surface texture. Consequently, UV imaging was shown to be well-suited for monitoring of the tablet coating layer quality. UV imaging is a promising technique for fast quality control of the tablet coating because of the high data acquisition speed and its nondestructive analytical nature.

Evaluation of Hot-Melt Extrusion and Injection Molding for Continuous Manufacturing of Immediate-Release Tablets

The exploitation of hot-melt extrusion and injection molding for the manufacturing of immediate-release (IR) tablets was preliminarily investigated in view of their special suitability for continuous manufacturing, which represents a current goal of pharmaceutical production because of its possible advantages in terms of improved sustainability. Tablet-forming agents were initially screened based on processability by single-screw extruder and micromolding machine as well as disintegration/dissolution behavior of extruded/molded prototypes. Various polymers, such as low-viscosity hydroxypropylcellulose, polyvinyl alcohol, polyvinyl alcohol-polyethylene glycol graft copolymer, various sodium starch glycolate grades (e.g., Explotab(®) CLV) that could be processed with no need for technological aids, except for a plasticizer, were identified. Furthermore, the feasibility of both extruded and molded IR tablets from low-viscosity hydroxypropylcellulose or Explotab(®) CLV was assessed. Explotab(®) CLV, in particular, showed thermoplastic properties and a very good aptitude as a tablet-forming agent, starting from which disintegrating tablets were successfully obtained by either techniques. Prototypes containing a poorly soluble model drug (furosemide), based on both a simple formulation (Explotab(®) CLV and water/glycerol as plasticizers) and formulations including dissolution/disintegration adjuvants (soluble and effervescent excipients) were shown to fulfill the USP 37 dissolution requirements for furosemide tablets.

Preparation of pellets containing Pothomorphe umbellata extracts by extrusion-spheronization: improvement of 4-nerolidylcatechol photostability

Pothomorphe umbellata (L.) Miq., Piperaceae, has been extensively used in Brazilian folk medicine and it is well known for its strong antioxidant properties. However, its main active constituent, 4-nerolydilcatechol (4-NC), is sensitive to ultraviolet and visible light, which can limit the use of intermediate and final herbal preparations of this species. In the present work, coated multiparticulate solid dosage forms of P. umbellata were obtained with the purpose of increasing the stability of 4-NC. P. umbellata extract was used as a wetting liquid for the preparation of pellets by extrusion-spheronization. Pellets were coated in a fluidized bed by three different polymers (hydroxypropylmethylcellulose (HPMC), polyvynilpirrolidone K-30 (PVP-K30), and polyvinyl alcohol-polyethylene glycol graft-copolymer (PVA-PEG)). 4-NC photostability was evaluated by an accelerated photostability protocol. Pellets showed a narrow size distribution and low friability. 4-NC photodegradation followed a second order degradation kinetics with similar k values for the percolate, uncoated pellets and HPMC coated pellets. Photoprotection was higher in pellets coated with PVP-K30 and PVA-PEG. PVA-PEG coated pellets with 6 and 9% weight gain resulted in a final concentration of 4-NC approximately cinco times higher than uncoated pellets or liquid extracts, suggesting the potential of this formulation as a multiparticulate solid dosage form for P. umbellata extracts.

Effect of water-soluble polymers on the physical stability of aqueous polymeric dispersions and their implications on the drug release from coated pellets

Purpose: To investigate the physical stability and drug release-related properties of the aqueous polymer dispersions Kollicoat® SR 30 D and Aquacoat® ECD (an ethylcellulose-based dispersion) in the presence water-soluble polymers (pore formers) with special attention to the potential flocculation of the polymer dispersions. Methods: A precise characterization of the flocculation phenomena in undiluted samples was monitored with turbidimetric measurements using the Turbiscan Lab-Expert. Theophylline or propranolol HCl drug-layered pellets were coated with Kollicoat® SR 30 D and Aquacoat® ECD by the addition of water-soluble polymers polyvinyl pyrrolidone (Kollidon® 30 and 90 F), polyvinyl alcohol–polyethylene glycol graft copolymer (Kollicoat® IR), and hydroxypropyl methylcellulose (Pharmacoat® 603 or 606) in a fluidized bed coater Glatt GPCG-1 and drug release was performed according to UPS paddle method. Results: Stable dispersions were obtained with both Kollicoat® SR 30 D (a polyvinyl acetate-based dispersion) and Aquacoat® ECD with up to 50% hydrophilic pore formers polyvinyl alcohol-polyethylene glycol graft copolymer (Kollicoat® IR) and polyvinyl pyrrolidone (Kollidon® 30). In general, Kollicoat® SR 30 D was more stable against flocculation than Aquacoat® ECD. Stable dispersions were also obtained with higher amounts of water-soluble polymer or by reducing the concentration of the polymer dispersion. Flocculated dispersions resulted in porous films and, thus, in a sharp increase in drug release. Conclusions: Kollicoat® SR 30 D was more resistant to flocculation upon addition of water-soluble polymers than Aquacoat® ECD. The continuous adjustment of drug release from Kollicoat® SR 30-coated pellets was possible with Kollicoat® IR amounts over a broad range.

New insight into modified release pellets – Internal structure and drug release mechanism

The aim of the study was to explore the drug release mechanism from pellets, coated with blends of poly(vinyl acetate) (PVAc) and polyvinyl alcohol–polyethylene glycol graft copolymer (PVA-PEG). Water influx and drug solubilization inside the pellets were investigated in correlation to drug release. The highly soluble drug Chlorpheniramine maleate (CPM) was used as a model compound. Modified release pellets were manufactured by fluid bed drug layering and film coating of starter beads. The pellets were characterized using cross section EDX mapping, confirming location and homogeneity of the different layers. A film coat of 23%, containing PVAc/PVA-PEG in 9:1 ratio, resulted in a sigmoid shaped release curve with 2 h lag-time, followed by 3 h of continuous drug release. Using NMR analysis, water influx and drug solubilization inside the pellets were detected within 20 min. Additionally, dissolution of PVA-PEG after several minutes and drug release after the lag-time were measurable. A fast water influx into PVAc/PVA-PEG film coated pellets did not result in a fast drug release. Despite a fast drug solubilization within the pellets, drug release was initiated after 2 h, suggesting a one way stream of water during the observed lag-time.

Mechanistic analysis of drug release from tablets with membrane controlled drug delivery

The objective of this study was to receive detailed information on the mechanism of drug release from polyvinyl acetate (PVAc)/polyvinyl alcohol-polyethylene glycol graft copolymer (PVA-PEG) coated Propranolol HCl and Theophylline tablets. For this purpose the coating composition (PVAc/PVA-PEG: 90/10 and 80/20) and the amount of the coating layer have been varied. Due to its better solubility Propranolol HCl showed higher release rates than Theophylline. As expected, a higher percentage of the water soluble polymer accelerated drug release. Increased coating thickness led to amplified lag times of drug release. The water uptake of the tablets was quantified by gravimetric analysis. Furthermore, the microenvironment of the tablet core was monitored by EPR spectroscopy. For this purpose a hydrophilic EPR spin probe was incorporated into tablets. Surprisingly, despite a lag phase at the beginning and a controlled drug release over 24 h, the results of the EPR studies indicated an immediate water penetration through the coating layer into the tablet core. The water is able to solubilise the majority of water soluble compounds within minutes. The results obtained in this study demonstrate, that EPR is a powerful method to monitor the first steps of diffusion processes and the physicochemical state of coated dosage forms.