Polyurethane Foam Disk Samplers Research Articles

Atmospheric emissions estimation of polycyclic aromatic compounds from an oil sands tailings pond using passive air samplers

A mapping study targeting emissions of polycyclic aromatic compounds (PACs) from an oil sands tailings pond was undertaken in the Athabasca Oil sands Region (AOSR). Ten passive air samplers comprising polyurethane foam (PUF) disks were deployed around the perimeter of Suncor Tailings Pond 2/3 for a five-week period to generate time-integrated concentrations in air for PACs, which included ∑unsubstituted polycyclic aromatic hydrocarbons (PAHs), ∑alkylated PAHs (alk-PAHs), and ∑dibenzothiophenes (DBTs) (both unsubstituted and alkylated). Concentrations in air ranged from 13 to 70, 220–970, and 30–210 ng/m3, respectively, and were elevated in samplers downwind of the tailings pond. PAC emissions to air from the pond were estimated using only the air-side concentration information by applying a simplified Gaussian dispersion model and found to be 896 μg/m2/day. ∑alk-PAHs and ∑DBTs had the highest contribution to the total PAC fluxes (79% and 16%, respectively). This flux estimate for PACs is equivalent to 460 kg on an annual basis and 35 000 kg/year when scaled to represent all tailings ponds in the region. The results generally agree with fluxes estimated from coupled high volume air sampling data and tailings pond water concentrations from the same field study but which are complicated due to uncertainties associated with the use of pure water Henry's Law values for tailings pond water as well as the potential for surface oily films on the tailings ponds to impact water-air exchange of PACs. Overall, these findings support the use of relatively simple and electricity-free PUF disk samplers for mapping and estimating emissions from area sources such as tailings ponds, using only air-side concentration information.

Direct measurements of polyurethane foam (PUF) ‒ air partitioning coefficients for chemicals of emerging concern capable of equilibrating in PUF disk samplers

Organophosphate esters (OPEs), novel flame retardants (NFRs) and organochlorine pesticides (OCPs) are volatile to semi-volatile chemicals and therefore susceptible to approach equilibrium during typical deployments of polyurethane foam (PUF) disk passive air samplers. A generator column approach was used to measure the PUF-air partitioning coefficient (KPUF-air) for these targeted chemicals. KPUF-air values are required for these chemicals to estimate sampled equivalent air volumes, which vary substantially with temperature. Log KPUF-air measurements were made at temperatures ranging from+6 to+35°C and resulting values ranged from 5.14 to 7.77. Enthalpies of phase change for PUF to air (ΔHPUF-air, kJ/mol) ranged from 51.3 to 98.9. Two relationships of log KPUF-air versus log Koctanol-air (KOA) were derived, grouping OPEs and NFRs separately. The relationship for NFRs was in fair agreement (within about 0.6 log units) to a long-standing relationship by Shoeib and Harner (since 2002) for polychlorinated biphenyls (PCBs). However, the estimated values using Shoeib-Harner relationship substantially underestimates KPUF-air for the OPEs than directly measured values (by about an order of magnitude). These findings highlight the importance of the direct measurements of KPUF-air for emerging classes of chemicals whose concentrations are at risk of equilibrating in PUF disk samplers.

Calibration and application of PUF disk passive air samplers for tracking polycyclic aromatic compounds (PACs)

Results are reported from a field calibration of the polyurethane foam (PUF) disk passive air sampler for measuring polycyclic aromatic compounds (PACs) in the atmosphere of the Alberta oil sands region of Canada. Passive samplers were co-deployed alongside conventional high volume samplers at three sites. The results demonstrate the ability of the PUF disk sampler to capture PACs, including polycyclic aromatic hydrocarbons (PAHs), alkylated PAHs and parent and alkylated dibenzothiophenes. Both gas- and particle-phase PACs were captured with an average sampling rate of approximately 5 m3 day−1, similar to what has been previously observed for other semivolatile compounds. This is the first application of the PUF disk sampler for alkylated PAHs and dibenzothiophenes in air. The derived sampling rates are combined with estimates of the equilibrium partitioning of the PACs in the PUF disk samplers to estimate effective sample air volumes for all targeted PACs. This information is then applied to the passive sampling results from two deployments across 17 sites in the region to generate spatial maps of PACs. The successful calibration of the sampler and development of the methodology for deriving air concentrations lends support to the application of this cost-effective and simple sampler in longer term studies of PACs in the oil sands region.

Sorbent impregnated polyurethane foam disk passive air samplers for investigating current-use pesticides at the global scale

A pilot study conducted at a subset of 20 sites operated under the GAPS (Global Atmospheric Passive Sampling) Network compared the performance of two types of passive samplers for measuring air concentrations of currently–used pesticides, during 3–month deployment periods. The conventional polyurethane foam (PUF) disk sampler was able to capture a range of targeted current–use pesticides CUPs (dacthal, trifluralin, chlorothalonil, chlorpyrifos, and pendimethalin) but experienced equilibrium for some compounds (dacthal, trifluralin, and chlorothalonil) during the deployment period. The second sampler type used was a modified PUF disk sampler impregnated with XAD powder [i.e. the SIP (sorbent–impregnated PUF) disk] to increase sorptive capacity. The SIP disk sampler accumulated greater amounts of most targeted CUPs when compared to the PUF disk sampler. Results of the study showed that chlorothalonil was the most abundant CUP reflecting its widespread use, globally; whereas dacthal exhibited greater global distribution, including presence at remote sites, reflecting its high potential for long–range atmospheric transport. A thorough calibration of both the PUF disk and the SIP disk samplers is required to further define uptake profiles and to determine their range of applicability for various CUPs.

Application of Sorbent Impregnated Polyurethane Foam (SIP) Disk Passive Air Samplers for Investigating Organochlorine Pesticides and Polybrominated Diphenyl Ethers at the Global Scale

As part of continued efforts under the Global Atmospheric Passive Sampling (GAPS) Network to develop passive air samplers applicable to a wide-range of compounds, sorbent-impregnated polyurethane foam (SIP) disk samplers were codeployed and tested against conventional polyurethane foam (PUF) disk samplers. The SIP disk sampler has a higher sorptive capacity compared to the PUF disk sampler, due to its impregnation with ground XAD resin. The two sampler types were codeployed at 20 sites during the 2009, 3-month long spring sampling period of the GAPS Network. Air concentrations for chlordanes (trans-chlordane, cis-chlordane, and trans-nonachlor) and endosulfans (endosulfan I, endosulfan II, and endosulfan sulfate) derived from PUF disk and SIP disk samplers showed near 1:1 agreement and confirmed previous results for polychlorinated biphenyls (PCBs). Discrepancies observed for α-HCH and γ-HCH in PUF disk versus SIP disk are attributed to lack of "comparability" of the PUF and SIP data sets, due to differences in effective air sampled by the two devices caused by saturation of these higher volatility compounds in the lower capacity PUF disk samplers. Analysis of PBDEs in PUF and SIP disks showed relatively good agreement but highlighted challenges associated with high blanks levels for PBDEs. The higher capacity SIP disk samplers allowed for the analysis of pentachlorobenzene (PeCBz) and hexachlorobenzene (HCBz) and revealed a relatively uniform global distribution of these compounds. The results of this study further validate the SIP disk sampler as a complement to the PUF disk sampler, with capabilities for a broad range of POPs targeted under international POPs treaties such as the Stockholm Convention on POPs and its Global Monitoring Plan.

Assessing seasonal and spatial trends of persistent organic pollutants (POPs) in Indian agricultural regions using PUF disk passive air samplers

The first survey of persistent organic pollutant (POP) concentrations in air across several Indian agricultural regions was conducted in 2006–2007. Passive samplers comprising polyurethane foam (PUF) disks were deployed on a quarterly basis at seven stations in agricultural regions, one urban site and one background site. The project was conducted as a sub-project of the Global Atmospheric Passive Sampling (GAPS) Network. In addition to revealing new information on air concentrations of several organochlorine pesticides (OCPs) and polychlorinated biphenyls (PCBs), the study has demonstrated the feasibility of conducting regional-scale monitoring for POPs in India using PUF disk samplers. The following analytes were detected with relatively high concentrations in air (mean for 2006 and 2007, pg/m3): α- and γ-hexachlorocyclohexane (HCH) (292 and 812, respectively); endosulfan I and II (2770 and 902, respectively); p,p′-DDE and p,p′-DDT (247 and 931, respectively); and for the sum of 48 PCBs, 12,100 (including a site with extremely high air concentrations in 2007) and 972 (when excluding data for this site).

Global Pilot Study of Legacy and Emerging Persistent Organic Pollutants using Sorbent-Impregnated Polyurethane Foam Disk Passive Air Samplers

Sorbent-impregnated polyurethane foam (SIP) disk passive air samplers were deployed alongside polyurethane foam (PUF) disk samplers at 20 sites during the 2009 spring sampling period of the Global Atmospheric Passive Sampling (GAPS) Network. The SIP disk samplers consisted of PUF disks impregnated with finely ground XAD-4 resin. The addition of XAD-4 greatly improves the sorptive capacity of the PUF disk samplers for more volatile and polar chemicals, and allows for linear-phase sampling over several weeks for these compounds. The SIP and PUF disks were analyzed for polychlorinated biphenyls (PCBs), neutral polyfluoroalkyl compounds (PFCs), and ionic PFCs. Correlations between sampler-derived air concentrations for PCBs in the PUF and SIP disks samplers were significant (p < 0.05). The SIP disks effectively captured 4-50% more of the low molecular weight PCBs than the PUF disks samplers, and the PUF disks also had limitations for time-weighted passive sampling of neutral PFCs in air. Theoretical uptake curves for PUF disks showed rapid equilibration occurring in just hours for 8:2 FTOH and in a few days for MeFOSE, while theoretical curves for SIP disks showed superior sampling profiles for the neutral PFCs. PFCs were measured on SIP disks at all sites with 8:2 FTOH being the dominant compound detected and urban centers (n = 3) having the highest total neutral PFC concentrations ranging from 51.7 to 248 pg/m(3). A positive correlation was found between the FTOHs and FOSAs/FOSEs (p < 0.001, Pearson correlation) indicating similar contamination sources. The SIP disk appears to be a promising passive air sampler for measuring both emerging and legacy POPs on a global scale. They can also be used as a complement to the PUF disk sampler for capturing broader classes of compounds, or as a replacement for PUF disks entirely, especially when longer than quarterly deployment periods are desired.

Sorbent-Impregnated Polyurethane Foam Disk for Passive Air Sampling of Volatile Fluorinated Chemicals

A passive air sampler comprising a polyurethane foam (PUF) disk impregnated with XAD-4 powder has been developed. This sorbent-impregnated PUF (SIP) disk builds on previous work using PUF disk passive air samplers that have been effective in spatial air mapping studies of nonpolar hydrophobic chemicals, without the need of electricity or expensive air sampling equipment. In this study, PUF disks and SIP disks are calibrated for sampling volatile polyfluorinated chemicals--specifically, the fluorotelomer alcohols (FTOHs) and perfluoroalkyl sulfonamides (PFASs). Results demonstrate the low sorptive capacity of the PUF disk samplers, particularly for the FTOHs, with PUF disks reaching equilibrium within 1 day, after collecting approximately 0.4 and 1.2 m3 of air for 8:2 FTOH and 10:2 FTOH, respectively. This limits their use for these target compounds when time-weighted, linear-phase sampling is desired. The presence of just 0.4 g of XAD powder in the SIP disks greatly increases the sorptive capacity (by approximately 2 orders of magnitude for the FTOHs) and provides linear-phase sampling for a period of several weeks. PUF-air partition coefficients, KPUF-A, calculated for the FTOHs and PFASs are considerably lower than values predicted using previously established correlations against the octanol-air partition coefficient, KOA, demonstrating the unique partitioning behavior of the polyfluorinated chemicals. Using results from these calibration tests, air concentrations of FTOHs were derived from PUF disk samples that were deployed in 52 homes in Ottawa, Canada, during 2002/2003. These represent the first comprehensive measurements of FTOHs in indoor air in North America. Range and (geometric mean) air concentrations (pg m-3) were 261-28 900 (2070) for 8:2 FTOH and 104-9210 (890) for 10:2 FTOH. These air concentrations are orders of magnitude higher than observed for outdoor air, establishing indoor environments as important for human exposure and also as potential sources to the larger environment.

Calibration of polyurethane foam (PUF) disk passive air samplers for quantitative measurement of polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs): Factors influencing sampling rates

PUF disk passive air samplers are increasingly employed for monitoring of POPs in ambient air. In order to utilize them as quantitative sampling devices, a calibration experiment was conducted. Time integrated indoor air concentrations of PCBs and PBDEs were obtained from a low volume air sampler operated over a 50 d period alongside the PUF disk samplers in the same office microenvironment. Passive sampling rates for the fully-sheltered sampler design employed in our research were determined for the 51 PCB and 7 PBDE congeners detected in all calibration samples. These values varied from 0.57 to 1.55 m3 d(-1) for individual PCBs and from 1.1 to 1.9 m3 d(-1) for PBDEs. These values are appreciably lower than those reported elsewhere for different PUF disk sampler designs (e.g. partially sheltered) employed under different conditions (e.g. in outdoor air), and derived using different calibration experiment configurations. This suggests that sampling rates derived for a specific sampler configuration deployed under specific environmental conditions, should not be extrapolated to different sampler configurations. Furthermore, our observation of variable congener-specific sampling rates (consistent with other studies), implies that more research is required in order to understand fully the factors that influence sampling rates. Analysis of wipe samples taken from the inside of the sampler housing, revealed evidence that the housing surface scavenges particle bound PBDEs.

Toward a Global Network for Persistent Organic Pollutants in Air: Results from the GAPS Study

The Global Atmospheric Passive Sampling (GAPS) study aims to demonstrate the feasibility of using passive samplers to assess the spatial distribution of persistent organic pollutants on a worldwide basis. The GAPS network includes more than 40 sites on 7 continents, mainly in background locations, with some representation of urban and agricultural areas. Here we present concentrations of organochlorine pesticides (OCPs), polychlorinated biphenyls (PCBs), and polybrominated diphenyl ethers (PBDEs) in polyurethane foam disk samplers, deployed from December 2004 to March 2005. Legacy OCPs such as alpha-HCH (hexachlorocyclohexane), Chlordanes (trans- and cis-Chlordane and trans-Nonachlor), Dieldrin, and dichlorodiphenyltrichloroethane isomers were detected at most sites with some high values that may be related to possible continued use and/or re-emissions related to historic use. Geometric mean (GM) air concentrations (pg/m3) were: 8.5 for sigmaHCH (sum of alpha- and gamma-isomers), 2.6 for sigmaChlordanes, 0.8 for Dieldrin, and 0.8 for p,p'-DDE. Current-use pesticides such as gamma-HCH (lindane) and especially Endosulfan I exhibited more variable and higher concentrations with GMs of 5 and 58, respectively. PCBs and PBDEs were elevated at urban/suburban sites consistent with their historical use pattern. GM concentrations (pg/m3) were 17 for PCBs and 4 for PBDEs. Sampling under GAPS will continue and will eventually allow seasonality effects and longer-term temporal and spatial trends to be evaluated.