Polysaccharide-based Hydrogels Research Articles

Green construction of self-floating polysaccharide-based hydrogels with catalytic activity for efficient organic pollutants reduction

This study employed an anionic heteropolysaccharide extracted from overgrown Enteromorpha and homopolysaccharide pullulan to fabricate a self-floating hydrogel by introducing bubble templates. Subsequently, green in-situ reduction and immobilization of silver nanoparticles (Ag NPs) in the hydrogel were successfully achieved without additional reducing agents. The heteropolysaccharide from Enteromorpha provides carboxyl and sulfate groups for Ag+ ions complexation, which is beneficial for the in-situ reduction of Ag NPs and inhibits their aggregation. The incorporation of bubble templates facilitates the creation of a hierarchical pore structure in the hydrogel, giving it self-floating properties for easy recycling, while the hierarchical network with rich anchor sites ensuring adequate traction for Ag NPs dispersion and stabilization. By adjusting polysaccharide content and using bubble templates, Ag NPs smaller than 10 nm can be obtained. The composite hydrogel exhibits tunable catalytic activity and excellent degradation towards Rhodamine B, Methyl Orange, and 4-Nitrophenol, with the normalized rate constant (knor) of 78.89, 59.08, and 30.42 min−1 g−1, respectively. Notably, the reduction efficiency remained above 98 % after 6 recycles with little leaching of Ag NPs, benefiting from its self-floating ability for easy recovery in practical applications.

Thermosensitive injectable polysaccharide-based hydrogels: Gelation mechanisms, synthetic strategies, biomedical applications, and challenges

In recent years, thermosensitive polysaccharide-based injectable hydrogels have gained increasing attention in biomedical applications, including wound healing, drug delivery, and cartilage repair. These hydrogels have favorable biocompatibility, biodegradability, and tunable physical and chemical properties. Thermosensitive polysaccharide-based injectable hydrogels are a class of intelligent soft matter material. They can undergo a reversible liquid-solid transition when exposed to temperature stimuli. Therefore, their precursor solutions can be accurately inserted into target sites with irregular geometries in a minimally invasive way and then transformed into gels in situ by the organism’s temperature stimulation to deliver biologically active molecules. This review summarizes the recent developments of thermosensitive injectable polysaccharide-based hydrogels. The focus is on the mechanism of sol-gel phase transition, as well as the design and preparation of thermosensitive polysaccharides and their applications in biomedical fields. In addition, the outlook of the challenges in biomedical applications is provided at the end of the paper.

Nanofiber-reinforced self-healing polysaccharide-based hydrogel dressings for pH discoloration monitoring and treatment of infected wounds

The escalating global health concern arises from chronic wounds induced by bacterial infections, posing a significant threat to individuals. Consequently, an imperative exist for the development of hydrogel dressings to facilitate prompt wound monitoring and efficacious wound management. To this end, pH-sensitive bromothymol blue (BTB) and pH-responsive drug tetracycline hydrochloride (TH) were introduced into the polysaccharide-based hydrogel to realize the integration of wound monitoring and controlled treatment. Polysaccharide-based hydrogels were formed via a Schiff base reaction by cross-linking carboxymethyl chitosan (CMCS) on an oxidized sodium alginate (OSA) skeleton. BTB was used as a pH indicator to monitor wound infection through visual color changes visually. TH could be dynamically released through the pH response of the Schiff base bond to provide effective treatment and long-term antibacterial activity for chronically infected wounds. In addition, introducing polylactic acid nanofibers (PLA) enhanced the mechanical properties of hydrogels. The multifunctional hydrogel has excellent mechanical, self-healing, injectable, antibacterial properties and biocompatibility. Furthermore, the multifaceted hydrogel dressing under consideration exhibits noteworthy capabilities in fostering the healing process of chronically infected wounds. Consequently, the research contributes novel perspectives towards the advancement of intelligent and expeditious bacterial infection monitoring and dynamic treatment platforms.

Characterization of Three Polysaccharide-Based Hydrogels Derived from Laminaria japonica and Their Hemostatic Properties

Characterization of Three Polysaccharide-Based Hydrogels Derived from Laminaria japonica and Their Hemostatic Properties

Synthesis and real-time characterization of self-healing, injectable, fast-gelling hydrogels based on alginate multi-reducing end polysaccharides (MREPs)

Polysaccharide-based hydrogels are promising for many biomedical applications including drug delivery, wound healing, and tissue engineering. We illustrate herein self-healing, injectable, fast-gelling hydrogels prepared from multi-reducing end polysaccharides, recently introduced by the Edgar group. Simple condensation of reducing ends from multi-reducing end alginate (M-Alg) with amines from polyethylene imine (PEI) in water affords a dynamic, hydrophilic polysaccharide network. Trace amounts of acetic acid can accelerate the gelation time from hours to seconds. The fast-gelation behavior is driven by rapid Schiff base formation and strong ionic interactions induced by acetic acid. A cantilever rheometer enables real-time monitoring of changes in viscoelastic properties during hydrogel formation. The reversible nature of these crosslinks (imine bonds, ionic interactions) provides a hydrogel with low toxicity in cell studies as well as self-healing and injectable properties. Therefore, the self-healing, injectable, and fast-gelling M-Alg/PEI hydrogel holds substantial promise for biomedical, agricultural, controlled release, and other applications.

Recoverable and degradable carboxymethyl chitosan polyelectrolyte hydrogel film for ultra stable encapsulation of curcumin

Hydrogels have shown great potential for application in food science due to their diverse functionalities. However, most hydrogels inevitably contain toxic chemical cross-linking agent residues, posing serious food safety concerns. In this paper, a curcumin/sodium alginate/carboxymethyl chitosan hydrogels (CSCH) were prepared by self-assembly of two oppositely charged polysaccharides, carboxymethyl chitosan and sodium alginate, to form a three-dimensional network encapsulating curcumin for extending food shelf life. The network structure of the CSCH film confirmed by FTIR, XRD, and XPS was mainly formed by electrostatic interactions. The chemical stability of CSCH network encapsulated curcumin was 4.2 times greater than that of free curcumin, with excellent gas barrier, antimicrobial, antioxidant, and biosafety properties. It was found that CSCH films reduced dehydration, prevented nutrient loss, inhibited microbial growth, and lowered the respiration rate, which effectively maintained the quality of mango and prolonged its shelf-life up to 11 days. Notably, CSCH films possessed the properties of rapid recycling (10 mins) and biodegradability (53 days). This polysaccharide-based hydrogel film provides a viable strategy for the development of green and sustainable food packaging.

Evaluation of Osteogenic Potential of a Polysaccharide-Based Hydrogel Coating on Titanium.

Reducing the healing period after surgical placement of dental implants can facilitate the loading of dental prostheses. The aim is to compare the osteogenic potential of unmodified titanium disks with titanium disks that were surface-modified or hydrogel-coated. One hundred eight titanium disks (Ø6 × 2-mm) were divided into three groups: (1) unmodified titanium as control (Ti-C); (2) sandblasted and acid-etched (Ti-SLA), and (3) coated with tamarind kernel polysaccharide hydrogel grafted with acrylic acid (Ti-TKP-AA). The osteogenic potential and cytotoxic effect of various groups of titanium were compared using human osteoblasts Saos-2. The surface topography of the titanium disks and morphology of osteoblasts grown on disks were investigated by scanning electron microscopy (n = 3). Cell attachment to the disks and actin expression intensity were investigated by confocal imaging (n = 3).Cytotoxicity was quantified by cell viability assay (n = 9). Osteoblast maturation was determined by alkaline phosphatase assay (n = 9). Cell mineralization was quantified by Alizarin red staining (n = 9). One-way analysis of variance followed by Tukey's multiple comparisons test was used for intergroup comparisons (α= 0.05). The surface modifications on Ti-SLA and Ti-TKP-AA support better morphology and proliferation of osteoblasts than Ti-C (P< 0.001) and significantly higher levels of actin cytoskeleton accumulation (P< 0.0001). Ti-TKP-AA showed a significantly higher maturation rate than Ti-C (P< 0.001). Ti-TKP-AA showed > twofold increased mineralization than Ti-C and Ti-SLA (P< 0.001). TKP-AA hydrogel-coated titanium promotes faster osteoblast proliferation, maturation, and mineralization than SLA-treated or untreated titanium. These advantages can be explored for achieving early osseointegration and prosthetic loading of titanium dental implants.

Space-Efficient 3D Microalgae Farming with Optimized Resource Utilization for Regenerative Food.

Photosynthetic microalgae produce valuable metabolites and are a source of sustainable food that supports life without compromising arable land. However, the light self-shading, excessive water supply, and insufficient space utilization in microalgae farming have limited its potential in the inland areas most in need of regenerative food solutions. Herein, this work develops a 3D polysaccharide-based hydrogel scaffold for vertically farming microalgae without needing liquid media. This liquid-free strategy is compatible with diverse microalgal species and enables the design of living microalgal frameworks with customizable architectures that enhance light and water utilization. This approach significantly increases microalgae yield per unit water consumption, with an 8.8-fold increase compared to traditional methods. Furthermore, the dehydrated hydrogels demonstrate a reduced size and weight (≈70% reduction), but readily recover their vitality upon rehydration. Importantly, valuable natural products can be produced in this system including proteins, carbohydrates, lipids, and carotenoids. This study streamlines microalgae regenerative farming for low-carbon biomanufacturing by minimizing light self-shading, relieving water supply, and reducing physical footprints, and democratizing access to efficient aquatic food production.

Decoupling stiffness and toughness of self-healing hydrogels for complex tissue regeneration via 3D bioprinting

Although polysaccharides are attractive biocompatible materials compared with synthetic polymers, most polysaccharide-based hydrogels exhibit suboptimal mechanical properties. In this study, we fabricated a hyaluronate (HA)-based self-healing hydrogel with enhanced toughness that can be used as a 3D bioink for complex tissue regeneration. We hypothesized that the incorporation of oxidation, aimed at minimizing the reduction in the molecular weight of HA, along with the introduction of a double network to the hydrogel, could facilitate the construction of 3D structures with decoupled stiffness and toughness. Various physicochemical properties of hydrogels comprising oxidized and hydrazide-modified HAs for potential use as bioinks were assessed. Bilayered constructs containing primary chondrocytes and osteoblasts were designed and fabricated using 3D printing to mimic the growth plate structure. Transplantation of the 3D-printed construct into a mouse model revealed the controlled differentiation stages of chondrocytes. This strategy for tailoring 3D scaffolds and addressing the limitations of polysaccharide-based hydrogels may hold promise for applications in the biomedical field, including the regeneration of complex tissues and organs.

Self-Healing, Freeze-Resistant, and Sustainable Aloe Polysaccharide-Based Hydrogels for Multifunctional Sensing

Self-Healing, Freeze-Resistant, and Sustainable Aloe Polysaccharide-Based Hydrogels for Multifunctional Sensing

Cation Effect in Polysaccharide-Based Hydrogel Beads Produced for Europium Adsorption from Aqueous Solutions

AbstractIn recent decades, renewable and biodegradable polysaccharide-based hydrogels have enjoyed wide applicability among them also as adsorbents for heavy metal removal from wastewaters. Herein we prepared hydrogel beads from iota and kappa carrageenans using a variety of salts as crosslinkers, that were tested for the first time in europium ion (Eu3+) sorption from an aqueous solution as representative lanthanide. The type of the salt, and especially the valance and the hydrated radius of the cation, were found to dictate hydrogel bead formation and structure and, therefore, the Eu3+ sorption yield. The results of ATR-FTIR, SEM and TGA analyses to characterize the iota carrageenan hydrogel beads that were prepared with alkali cations, before and after interaction with Eu3+, indicate that the adsorbent prepared with LiCl was much stiffer and more stable than those prepared with NaCl or KCl. The iota carrageenan beads that were prepared with LiCl were also reused 5 times while exhibiting high adsorption capacities.

Polysaccharide-based hydrogels for microencapsulation of bioactive compounds: A review

Natural polymer hydrogels are gaining a lot of interest because of their high biocompatibility, nontoxicity, easy gelation, and functionalization. Polysaccharide-hydrogels, which are employed in a variety of sectors, may alter volume, phase, and structure in response to external stimuli. The delivery technique based on polysaccharides and the release of bioactive substances may have an effect on the gastrointestinal system. The regulated release of bioactive substances encapsulated in core materials is critical in delivering compounds to the target. The releasing property is largely influenced by the polymer's encapsulation efficiency and affinity for bioactive compounds. The most basic method of trapping bioactive compounds inside the polysaccharide hydrogel matrix results in a perfect situation of prolonged and smooth release. The polysaccharide material is readily accessible, and its biocompatibility makes it an excellent active component encapsulation medium. The biochemical phase shift and surface flexibility of the hydrogels in response to external stimuli cause the material to release bioactive components. This study highlights the encapsulation efficiency of diverse polysaccharide hydrogels incorporating different bioactive compounds obtained through various extraction methods, and explores their applicability in various fields.

A review: polysaccharide-based hydrogels and their biomedical applications

A review: polysaccharide-based hydrogels and their biomedical applications

Chia (Salvia hispanica L.) seed mucilage (a heteropolysaccharide) based antimicrobial hydrogel scaffold for wound healing: In vitro-in-vivo characterization

Wound healing is an intricate process necessitating the utilization of innovative bioactive materials to enhance and expedite recovery. Polysaccharide-based hydrogels for wound dressing have garnered significant attention due to their commendable biocompatibility, biodegradability, and non-toxic properties. Consequently, this study will design zinc oxide nanoparticles (ZnONP) and allantoin (AT) incorporated chia seed mucilage (CSM) based antimicrobial hydrogel scaffold via solvent casting method to accelerate the wound healing process. The confirmation of an ideal CSM/20 %ZnONP/AT hydrogel scaffold is achieved through spectral analysis and assessment of mechanical properties. The scaffold exhibits notable characteristics, including 36.99 % of porosity, 20.34 degrees of swelling, 63.38 % of water retention capacity, and 11.16 % of moisture content. Importantly, the hydrogel demonstrates no cytotoxicity towards normal cell lines (log p > 0.05), high drug loading efficiency (98.75 %), and 34.16 % release of AT within 8 h, following a first-order release (R2 = 0.9892). Additionally, it manifests good antibacterial and antifungal activity attributed to the presence of ZnONP within the scaffold. In vivo studies conducted using a Wistar rat model displayed a substantial reduction in wound size (90.70 %) within 14 days compared to the control group. Histopathological analysis indicates the dynamic progression of the healing process facilitated by the application of AT in conjunction with CSM and ZnONP. The enhanced performance of the CSM/20 %ZnONP/AT hydrogel scaffold is attributed to the distinctive characteristics of CSM, ZnONP, and AT. This study anticipates that CSM-based hydrogel scaffolds will pave the way for novel and promising applications in the field of wound healing.

Immobilization of Thermomyces lanuginosus lipase in a novel polysaccharide-based hydrogel by a two-step crosslinking method and its use in the lauroylation of α-arbutin

The Thermomyces lanuginosus lipase (TLLs) was successfully immobilized within a novel hydrogel matrix through a two-step crosslinking method. TLLs were initially crosslinked through the Schiff base reaction by oxidized carboxymethyl cellulose (OCMC). The water-soluble OCMC@TLLs complex was subsequently crosslinked by carboxymethyl chitosan (CMCSH) in a microfluidic apparatus to form the CMCHS/OCMC@TLLs microspheres. The CD (Circular Dichroism, CD) and FT-IR (Fourier Transform infrared spectroscopy, FT-IR) spectra demonstrated that the crosslinking of TLLs with OCMC resulted in a less significant impact on their structure compared to that with glutaraldehyde. CMCHS/OCMC@TLLs showed decreased catalytic performance due to the mass transfer resistance, while its thermal stability was greatly improved. The CMCHS/OCMC@TLLs were used to catalyze the lauroylation of arbutin in tetrahydrofuran. After 12 h of reaction under optimal conditions, the yield of 6′-O-lauryl arbutin reached an impressive 92.12%. The prepared 6′-O-lauryl arbutin has high lipophilicity and exhibits similar tyrosinase inhibitory activity and higher antioxidant activity compared to its parent compound.Graphical

Constructing robust and recyclable self-powered polysaccharide-based hydrogels by adjusting Zn2+/Li+ bimetallic networks

Self-powered polysaccharide-based hydrogels function as recyclable electrolytes and flexible sensing materials.

Near-infrared light-actuated on-demand botanicals release and hyperthermia by an antibiotic-free polysaccharide-based hydrogel dressing for the synergistic treatment of wound infections.

Bacterial infection is a key factor affecting wound healing. Conventional treatments might lead to the widespread emergence of drug-resistant bacteria due to the long-term and excessive use of antibiotics. It is necessary to develop an antibiotic-free method for effective treatment of bacterial wound infections. In this work, we constructed an antibiotic-free polysaccharide-based hydrogel dressing (ATB) with near-infrared light-actuated on-demand botanicals release and hyperthermia for the synergistic treatment of wound infections. The ATB hydrogel dressing was made up of agarose as a support matrix, berberine hydrochloride as the active botanicals and TA-Fe(III) nanoparticles as NIR laser-activated photothermal reagents. The ATB hydrogel dressing showed spatiotemporal botanicals release and excellent photothermal properties with NIR irradiation. With the results of in vitro and in vivo antibacterial experiments, the antibiotic-free ATB hydrogel could synergistically eliminate bacteria and accelerate wound healing. Overall, the near-infrared light-responsive ATB hydrogel could provide a promising antibiotic-free strategy for the treatment of bacterial wound infections.

Tough, high conductivity pectin polysaccharide-based hydrogel for strain sensing and real-time information transmission

Hydrogels from natural polymers are eco-friendly, biocompatible and adjustable for manufacturing wearable sensors. However, it is still challenging to prepare natural polymer hydrogel sensors with excellent properties (e.g., high conductivity). Here, we developed a physically cross-linked, highly conductive and multifunctional hydrogel (named PPTP) to address this challenge. The natural renewable pectin-based PPTP hydrogel is synthesized by introducing tannic acid (TA), calcium chloride (CaCl2), and sodium chloride (NaCl) into the pectin/polyvinyl alcohol (PVA) dual network structure. The hydrogel exhibits excellent characteristics, including unique tensile strength (2.6155 MPa), high electrical conductivity (7 S m−1), and high sensitivity (GF = 3.75). It is also recyclable, further enhancing its eco-friendly nature. The PPTP hydrogel can be used for monitoring human joint activities, as flexible electrodes for monitoring electrocardiogram (ECG) signals, and touchable screen pen for electronic skin. Moreover, when combined with Morse code and wireless Bluetooth technology, PPTP hydrogels can be used for underwater and land information encryption, and decryption. Our unique PPTP hydrogel offers promising opportunities for medical monitoring, information transfer, and human-computer interaction.

A multifunctional cellulose- and starch-based composite hydrogel with iron-modified biochar particles for enhancing microalgae growth

A multifunctional polysaccharide-based hydrogel was studied as an additive for enhancing microalgae growth. The hydrogel was fabricated by physically and chemically crosslinking renewable ingredients of carboxymethyl cellulose (CMC), arrowroot starch, and activated biochar modified with iron using a bio-crosslinker of oxidized sucrose and a plasticizer of glycerol. The optimum formula for the hydrogel with a high swelling ratio, BET surface area, and electrical conductivity was found to include 1 g starch, 3 g CMC, 1.5 g biochar, 15 mL oxidized sucrose, and 1.5 mL glycerol in 200 mL deionized water. The algal yield and cell concentration after 14 days of growth in a Bold basal medium with an optimum concentration of 2.5 g hydrogel/L increased by 65.7 % and 92.2 %, respectively, compared to those of the control without the hydrogel. However, if the hydrogel concentration in the culture increased to 12.5 g/L, the algal yield was decreased by 67.8 % compared to the control due to oxidative injury. The hydrogel additive could significantly increase the nitrogen but decrease the carbon, hydrogen, and sulfur contents of the microalgae. The algal yield with 2.5 g/L hydrogel additive improved by 13.9 % compared to the algal yield with the same amounts of individual non–crosslinked hydrogel ingredients.

Polysaccharide-based hydrogel enriched by epidermal growth factor peptide fragment for improving the wound healing process

Wounds represent a "silent epidemic" in the global population that impact significantly people's quality of life and the economy of societies. Owing to the numerous therapies, the pursuit of a perfect wound dressing with superior performance for treating all sorts of wounds is still underway. Several studies have shown the potential of integrating restorative peptides into the scaffolds as potential therapeutic candidates for wound healing. So far, there is little information about the wound-healing effect of S-acetamidomethyl Cys 20-31-EGF peptide, a main fragment of epidermal growth factor. In this regard, the effectiveness of this peptide in the alginate-gum arabic polysaccharide hydrogel was evaluated as a wound dressing (AG-P). Physicochemical evaluation of the hydrogels demonstrated that the incorporation of the peptide compressed the hydrogel network due to the presence of hydrogen and electrostatic bonds without significant effect on the mechanical, viscoelastic properties, swelling and degradation rate of the hydrogel. The hydrogel could continuously release the peptide and prevent rapid attenuation of its concentration. Cellular assessment of AG-P by scratch test and CFSE cytoplasmic dye/flow cytometry technique encouraged the migration and proliferation of human fibroblast cells, respectively. The effect of the AG-P on the expression of IL-6, TNF-α, NF-kB1 and VEGF genes indicated that this hydrogel reduced inflammation, and significantly increased angiogenesis compared to the control group based on the Real-time PCR results. In vitro assessment indicated that this structure can promote efficient and faster wound regeneration by altering the microenvironment of the wound. The hydrogel showed interesting features to be more equipped with other therapeutic agents making it as suitable dressing for various type of the wounds.