Physical Properties Of Polymers Research Articles

Changing the Linking Functionality in a Triblock Co-Polymer for Electrolyzer or Fuel Cell Membrane or Ionomer for Chemical Stability Improvements and Potentially Other Consequences.

We have developed a versatile scalable triblock polymer system for anion exchange membrane (AEM) based electrochemical energy conversion devices. This system is uniquely suited to solving both the membrane and ionomer challenges for the commercialization of AEM water electrolysis or fuel cells. Using our advanced fundamental understanding of AEMs based on our work which began in 2010, we can design systems from first principles to match the needs of the device. A triblock ABA polymer is readily fabricated that has both chemical and mechanical stability. The synthesis of these systems is robust, high yield and amenable to high volume production. It utilizes a novel dual chain transfer agent to mediate the chain-transfer ring-opening metathesis polymerization (ROMP) of cyclooctene (COE) or the polymerization of isoprene (IP) to give the hydrophobic B block of the polymer. This is followed by the reversible addition-fragmentation chain transfer radial polymerization of chloromethylstyrene (CMS). The polyCMS (pCMS) blocks are then quaternized with an amine to give the cationic hydrophilic A block. Before quaternization the B block is hydrogenated to give either semi-crystalline polyethylene (pE) or amorphous polymethylbutylene (pMB) from pCOE and pIP respectively. The obvious achilles heal in this system from a chemical durability standpoint is the linking ether functionality between the hydrophobic and hydrophilic blocks. The material we have synthesized to date have exceptional chemical and mechanical stability. It performs very well in ex-situ testing with KOH solutions and in device testing we have demonstrated >500 h at 50°C in water electrolysis in 5 cm2 cells in 1M carbonate electrolyte at 0.5 A cm-2. We attribute the chemical stability to the fact that we post quaternize the membrane to give methylpipiridinium cations and we assume that this reaction does not fully penetrate down the hydrophilic chain. This leaves a hydrophobic un-quaternized region close to the hydrophobic block that does not allow access to the ether linkage by the hydrated hydroxide anion. Recently a new approach to the telehelic mid block pCOE has been reported that has no ether linkages and allows the hydrophobic outer blocks to be linked by a methylene linker. This gives use an opportunity to directly contrast the chemical stability of two identical triblock co-polymers one with an ether linkage and one with a methylene linkage between blocks. In this presentation we will show the results from ex-situ chemical stability test one at low temperatures and higher hydroxide concentration and one at higher temperature and lower hydroxide concentration. There are many examples in polymer electrolyte chemistry where a simple change leads to unintended consequences. The geometry of the ether linkage versus the methylene linkage will change the way that the polymer chains will organize and entangle in ways that are not currently predictable. To probe the mechanical, chemical and morphological difference between these two polymers we will fully characterize and contrast both polymers physical chemical properties including water uptake, ionic conductivity, DSC, TGA, tensile strength and morphology through SAXS, WAXS and HRTEM. Data for the two polymer membranes will also be contrasted and compared in small laboratory 5 cm2 single cells for both electrolysis in dilute carbonate and H2/O2 fuel cells using conventional catalysts.

Beyond Traditional Stimuli: Exploring Salt-Responsive Bottlebrush Polymers-Trends, Applications, and Perspectives.

Bottlebrush polymers represent an important class of high-density side-chain-grafted polymers traditionally with high molecular weights, in which one or more polymeric side chains are tethered to each repeating unit of a linear polymer backbone, such that these macromolecules look like "bottlebrushes". The arrangement of molecular brushes is determined by side chains located at a distance considerably smaller than their unperturbed dimensions, leading to substantial monomer congestion and entropically unfavorable extension of both the backbone and the side chains. Traditionally, the conformation and physical properties of polymers are influenced by external stimuli such as solvent, temperature, pH, and light. However, a unique stimulus, salt, has recently gained attention as a means to induce shape changes in these molecular brushes. While the stimulus has been less researched to date, we see that these systems, when stimulated with salts, have the potential to be used in various engineering applications. This potential stems from the unique properties and behaviors these systems show when exposed to different salts, which could lead to new solutions and improvements in engineering processes, thus serving as the primary motivation for this narrative, as we aim to explore and highlight the various ways these systems can be utilized and the benefits they could bring to the field of engineering. This Review aims to introduce the concept of stimuli-responsive bottlebrush polymers, explore the evolutionary trajectory, delve into current trends in salt-responsive bottlebrush polymers, and elucidate how these polymers are addressing a variety of engineering challenges.

Oxidation of Supported Amines for CO2 Direct Air Capture: Assessing Impact on Physical Properties and Mobility via NMR Relaxometry

AbstractAminopolymer‐based adsorbents are commonly investigated for CO2 direct air capture (DAC). In the presence of high temperature and oxygen, which can occur during adsorption‐regeneration cycles, oxidative degradation can significantly reduce adsorbent lifetime. Degradation is typically measured using adsorption performance metrics or chemical characterization. This work demonstrates that the polymer's physical properties, as measured via nuclear magnetic resonance (NMR) relaxometry and differential scanning calorimetry, can be used to quantitatively track degradation. The extent of oxidation of an alumina‐poly(ethylenimine) sample, measured by reductions in amine efficiency (A.E.), is correlated with proton T2 relaxation times. This work hypothesizes that T2 relaxation accurately tracks oxidative degradation in aminopolymers due to the reduction in polymer mobility occurring during the oxidation process. The ability to use NMR relaxometry as a noninvasive technique to probe degradation is demonstrated on a 1‐inch square‐channel monolith adsorbent exposed to actual DAC service conditions. This highlights the potential for relaxometry to evaluate the state of the adsorbent accurately and rapidly compared to typical analytical methods.

Experimental Validation of the Microplastic Index—Two Approaches to Understanding Microplastic Formation

The Microplastic Index (MPI) was presented in a previous paper as a method to assess the formation of microplastics during the application of impact and wear stresses, based on selected mechanical and physical properties of polymers. In this paper, the experimental validation of the MPI model is presented. A series of ten polymers was characterized to obtain the relevant parameters for the calculation of the MPI, i.e., the minimum particle size and volume of microplastics formed. The milling (addressing impact stress) and sanding experiments (addressing wear stress) resulted in particle sizes between 3 and 200 μm and 0.3 and 25 μm, respectively. These values were very well predicted by the MPI model, showing smaller particles for brittle polymers and larger ones for ductile polymers. In addition, the experimental-specific wear rates of impact and wear correlated well with the predicted ones, being 0.01–30 mm3/Nm for impact and 0.0002–0.012 mm3/Nm for wear. These results indicate that the MPI can be very well used to predict the tendency of a material to form microplastics. In the search for understanding and mitigating microplastic formation, the MPI can be used by both producers and end users to choose plastic grades that form fewer microplastics.

A Review of Natural Fiber-Reinforced Polymer Composite Chemical, Physical, and Thermo-Mechanical Properties

The current study reviews provide a brief overview on the properties of natural fiber and natural fiber reinforced composites like chemical, physical, mechanical properties and thermal behavior which is an emerging area in polymer science. The unique properties of these composites are based on the attributes of the individual components, as well as the relative numbers and arrangements of those components within the material system. The widespread acceptance of composites reinforced with natural fibers has attracted many researchers due to its cost, sustainability, low environmental impact and great availability in nature. The processing of natural fibers is not difficult as compared to the production of conventional fibers. In the construction, aerospace, military, building, packaging, consumer products, and transportation industries for ceiling, paneling, partition boards, etc., natural fibers have shown to be a successful substitute for synthetic fiber. Because of these factors, natural fibers are preferred to conventional fibers. However, natural fiber reinforced composites also have some negative aspects such as increased susceptibility to water damage, less durability in the event of a fire, and diminished strength when they are subjected to mechanical stress. In this paper, the overview related to the natural fiber-reinforced composites and their properties is provided.

State-of-the-Art Review of Aliphatic Polyesters and Polyolefins Biodeterioration by Microorganisms: From Mechanism to Characterization

As a result of the exponential growth in the production of plastics and their extended degradation period, strong environmental concerns in association with the disposal of plastic waste have emerged. Pursuing sustainable solutions for managing plastic waste has led to significant interest in plastic biodegradation research, with a specific focus on biodeterioration facilitated by microorganisms. The biodeterioration of plastic by microorganisms is a complex phenomenon that can be influenced by a variety of environmental factors such as humidity, temperature, and pH, as well as polymer properties such as molecular structure, molecular weight, and crystallinity. Toward a better understanding of this phenomenon for resolving the issue of plastic waste, this review article focuses on the biodeterioration of synthetic polymers, in particular aliphatic polyesters and polyolefins, through the enzymatic activities of microorganisms. First, the mechanism of polymer biodegradation via enzymatic activity is discussed, followed by the physical properties of polymers and environmental conditions that influence their biodegradability rates. Then, an overview of experimental approaches and standardized protocols used to assess the biodegradability of polymers by these degrading agents is provided. Finally, current developments in employing biodeterioration for the degradation of aliphatic polyesters and polyolefins are reviewed. The review concludes with a discussion on the complexity of biodegradation by microorganisms, the necessity of proper engineering of polymer properties during production to enhance their biodegradability, and the need for further research to discover sustainable and environmentally acceptable alternatives.

Strategy for Constructing Phosphorus-Based Flame-Retarded Polyurethane Elastomers for Advanced Performance in Long-Term.

Polyurethane elastomer (PUE), which is widely used in coatings for construction, transportation, electronics, aerospace, and other fields, has excellent physical properties. However, polyurethane elastomers are flammable, which limits their daily use, so the flame retardancy of polyurethane elastomers is very important. Reactive flame retardants have the advantages of little influence on the physical properties of polymers and low tendency to migrate out. Due to the remarkable needs of non-halogenated flame retardants, phosphorus flame retardant has gradually stood out as the main alternative. In this review, we focus on the fire safety of PUE and provide a detailed overview of the current molecular design and mechanisms of reactive phosphorus-containing, as well as P-N synergistic, flame retardants in PUE. From the structural characteristics, several basic aspects of PUE are overviewed, including thermal performance, combustion performance, and mechanical properties. In addition, the perspectives on the future advancement of phosphorus-containing flame-retarded polyurethane elastomers (PUE) are also discussed. Based on the past research, this study provides prospects for the application of flame-retarded PUE in the fields of self-healing materials, bio-based materials, wearable electronic devices, and solid-state electrolytes.

Transfer Learning of Full Molecular Weight Distributions via High-Throughput Computer-Controlled Polymerization.

The skew and shape of the molecular weight distribution (MWD) of polymers have a significant impact on polymer physical properties. Standard summary metrics statistically derived from the MWD only provide an incomplete picture of the polymer MWD. Machine learning (ML) methods coupled with high-throughput experimentation (HTE) could potentially allow for the prediction of the entire polymer MWD without information loss. In our work, we demonstrate a computer-controlled HTE platform that is able to run up to 8 unique variable conditions in parallel for the free radical polymerization of styrene. The segmented-flow HTE system was equipped with an inline Raman spectrometer and offline size exclusion chromatography (SEC) to obtain time-dependent conversion and MWD, respectively. Using ML forward models, we first predict monomer conversion, intrinsically learning varying polymerization kinetics that change for each experimental condition. In addition, we predict entire MWDs including the skew and shape as well as SHAP analysis to interpret the dependence on reagent concentrations and reaction time. We then used a transfer learning approach to use the data from our high-throughput flow reactor to predict batch polymerization MWDs with only three additional data points. Overall, we demonstrate that the combination of HTE and ML provides a high level of predictive accuracy in determining polymerization outcomes. Transfer learning can allow exploration outside existing parameter spaces efficiently, providing polymer chemists with the ability to target the synthesis of polymers with desired properties.

Polymer materials for solving actual problems of membrane gas

Membrane gas separation using polymeric membranes is one of rapidly developing energy-conserving technologies. This review describes the scope of membrane gas separation problems and demonstrates the relevance of membrane methods for their solution. The basic concepts and regularities of diffusion gas transfer and principles and characteristics of membrane gas separation are considered. The main physicochemical approaches to the selection of membrane materials considering both the properties of the gas–polymer system and the structure and physical properties of polymers are discussed. The considered issues are combined within a common approach to substantiate the choice of both existing commercial polymers and advanced polymeric materials to address important gas separation problems such as separation of air components; carbon dioxide, hydrogen and helium recovery from natural and industrial gas mixtures; and separation of a nitrogen and methane mixture. The avenues of development of the membrane materials science to solve each of the mentioned problems of membrane gas separation are demonstrated. The review is intended for specialists in the synthesis and physics of polymers for planning the research and assessing the applicability of polymeric materials for various practical gas separation problems and for specialists in the membrane materials science and membrane technology. <br> The bibliography includes 165 references.

Recovery of (Z)-13-Docosenamide from Industrial Wastewater and Its Application in the Production of Virgin Polypropylene to Improve the Coefficient of Friction in Film Type Applications

Additives play an important role in the production of plastic materials through their application, in which the mechanical, thermal, and physical properties of polymers are improved, making them last longer and be more resistant. During the synthesis of polypropylene resins, the remains of additives that are not absorbed by the resin are removed in the purification stage and end up in the wastewater. In this article, the recovery of (Z)-13-docosenamide from the wastewater from the process, its purification, and its application in the process was carried out. For the extraction of the additive, solid phase extraction (SPE) was used, and to guarantee the purity of (Z)-13-docosenamide, techniques such as high performance liquid chromatography (HPLC), Fourier transform infrared (FTIR), gas chromatography-mass spectrometry (GC/MS), thermogravimetric (TG) coupled with a gas chromatography-mass spectrometry (GC/MS), and differential scanning calorimetry (DSC) were used. The recovered erucamide was added to the PP between 0.05 and 0.3% w/w. The effects of the properties of the virgin polypropylene with the recovered additive were also evaluated to determine its effectiveness in improving the properties of the material by measuring the coefficient of friction (CoF) as well as the mechanical properties and wettability through atomic force microscopy (AFM) and the contact angle, respectively. It was discovered that using these techniques, it is possible to recover approximately 95% of the additive present in the water while keeping the material’s properties within the desired limits.

Relaxation and Amorphous Structure of Polymers Containing Rigid Fumarate Segments.

The physical properties of polymers are significantly affected by relaxation processes. Recently, we reported that poly(diethyl fumarate) (PDEF) shows two thermal anomalies on DSC measurement, despite the fact that it is a homopolymer. We attribute these two relaxations α relaxation and β relaxation, respectively. In this study, we investigate the two relaxations of fumarate-containing polymers by DSC, solid-state NMR, and X-ray scattering. The two relaxations are present even in a copolymer of diethyl fumarate and ethyl acrylate with fumarate segments of 30%. We used poly(methyl methacrylate) (PMMA) as a model polymer for comparison, since there are detailed investigations of its dynamics and physical properties. Solid-state NMR indicates that the very local relaxation of poly(fumarate)s is not significantly different from that of PMMA. The tensile test showed that PDEF is still brittle at above β relaxation temperature and below α relaxation temperature. It was revealed that a structural anisotropy appeared when PDEF was extended at around α relaxation temperature. We discuss the effect of the glassy packing of the rigid polymer chain including the DEF segments on the strong β relaxation behavior. Our data provide insight into the microscopic mechanism of β relaxation of vinyl polymers.

Synthetic Thermo-Responsive Terpolymers as Tunable Scaffolds for Cell Culture Applications.

The use of tailored synthetic hydrogels for in vitro tissue culture and biomanufacturing provides the advantage of mimicking the cell microenvironment without issues of batch-to-batch variability. To that end, this work focused on the design, characterization, and preliminary evaluation of thermo-responsive, transparent synthetic terpolymers based on N-isopropylacrylamide, vinylphenylboronic acid, and polyethylene glycol for cell manufacturing and in vitro culture applications. Polymer physical properties were characterized by FT-IR, 1H-NMR, DLS, rheology, and thermal-gravimetric analysis. Tested combinations provided polymers with a lower critical solution temperature (LCST) between 30 and 45 °C. Terpolymer elastic/shear modulus varied between 0.3 and 19.1 kPa at 37 °C. Cellular characterization indicated low cell cytotoxicity on NIH-3T3. Experiments with the ovarian cancer model SKOV-3 and Jurkat T cells showed the terpolymers’ capacity for cell encapsulation without interfering with staining or imaging protocols. In addition, cell growth and high levels of pluripotency demonstrated the capability of terpolymer to culture iPSCs. Characterization results confirmed a promising use of terpolymers as a tunable scaffold for cell culture applications.

Proanthocyanidins from Vaccinium vitis-idaea L. Leaves: Perspectives in Wound Healing and Designing for Topical Delivery.

The compositions and health-beneficial properties of lingonberry leaves (Vaccinium vitis-idaea L.) are well established; however, their proanthocyanidins are still heavily underutilized. Optimizing their delivery systems is key to enabling their wider applications. The present study investigates the phytochemical and ‘wound-healing’ properties of proanthocyanidin-rich fraction(s) (PRF) from lingonberry leaves as well as the development of optimal dermal film as a proanthocyanidin delivery system. The obtained PRF was subjected to HPLC-PDA and DMAC analyses to confirm the qualitative and quantitative profiles of different polymerization-degree proanthocyanidins. A ‘wound healing’ in vitro assay was performed to assess the ability of PRF to modulate the wound environment for better healing. Low concentrations of lingonberry proanthocyanidins were found to accelerate ‘wound‘ closures, while high levels inhibited human fibroblast migration. Fifteen dermal films containing PRF were prepared and evaluated based on their polymer (MC, HEC, PEG 400) compositions, and physical, mechanical, and biopharmaceutical properties using an experimental design. The composition containing 0.30 g of MC, 0.05 g of HEC, and 3.0 g of PEG 400 was selected as a promising formulation for PRF delivery and a potentially effective functional wound dressing material, supporting the need for further investigations.

Shear and cooling induced regulation of mechanical properties and glass transition temperature of isotactic polypropylene

In different experimental studies, it has been observed that polymer properties such as structural, mechanical and thermo-mechanical properties vary with processing conditions. Therefore, molecular dynamic simulation techniques are used to investigate the variation in mechanical and physical properties of isotactic polypropylene polymer under various processing conditions. Non-equilibrium molecular dynamics simulation was used to look into the effect of shear rate on properties. Further different cooling rates were used to cool down the melt structures. For different shear and cooling rates, we calculated selected structural, mechanical and physical properties of polymer which include density of polypropylene in solid state, Young’s modulus and glass transition temperature respectively. Young’s modulus and glass transition temperature show dependency on shear and cooling rate. Results showed that high shear and slow cooling significantly enhance the Young’s modulus and glass transition temperature of the processed polymer.

Polymer type effect on PLGA-based microparticles preparation by solvent evaporation method with single emulsion system using focussed beam reflectance measurement

Aim This study aimed to investigate the effect of polymer type on solidification rate of PLGA polymeric microparticles and particle size/distribution of the emulsion droplets/hardened PLGA polymeric microparticles during solvent evaporation process using FBRM (Focussed Beam Reflectance Measurement). Methods PLGA polymeric microparticles were prepared by an O/W solvent evaporation method using various PLGA polymers, including PLGA Resomer® RG503H, RG502H and RG752H. The particle size mean, chord length distribution (CLD), and chord count of the emulsion droplets/hardened microparticles were monitored by FBRM. The morphology of polymeric microparticles were characterised by optical microscopy and scanning electron microscopy (SEM). Results The transformation of the emulsion droplets into solid microparticles occurred within the first 30 (± 1.04), 34 (± 1.15) and 37 (± 0.82) min and square weighted mean chord lengths are 64.08 (± 3.18), 52.36 (± 5.27) and 42.18 (± 4.61) µm when PLGA Resomer® RG503H, RG502H and RG752H were used respectively. Larger square weighted mean chord length of PLGA polymeric microparticles gave lower chord counts. PLGA RG752H microparticles gave smallest square weighted mean chord length and the chord counts was the highest. The CLDs measured by FBRM showed that a larger particle size mean gave longer CLD and a lower peak of particle number. SEM data revealed that the morphology of microparticles was influenced by type and physical properties of polymer. Conclusions FBRM can be employed for online monitoring of the shift in the microparticle CLD and detect transformation of the emulsion droplets into solid microparticles during the solvent evaporation process. The microparticle CLD and transformation process were strongly influenced by polymer type.

Surface modification to enhance photo-stability of polymers

Photo-degradation is an irreversible alteration in the chemical, mechanical and physical properties of polymers, these alterations are a result of photon absorption from sunlight. UV-light is considered to be the main factor for initiating photo-degradation process of polymers. To extend the lifetime of polymers, their durability, overall minimization of the rate of photo degradation and protection of polymers against environmental factors, stabilizers are introduced to polymers. In addition, since the interaction of the polymer with its environment occurs mainly at the surface of the polymer, therefore surface modification of polymers is used to enhance the UV photo-stabilization. This method can also provide a more durable, weather resistant and photo-stable polymers.

Sustainability and Polyesters: Beyond Metals and Monomers to Function and Fate.

ConspectusPoor waste management and unchecked consumption underpin our current paradigm of plastics use, which is demonstrably unsustainable in the long term. Nonetheless, the utility and versatility of plastics suggest that the notion of a plastic-free society is also unsustainable. Responses to this conundrum are increasing, and among these are research efforts focused on the development of more sustainable plastics. This Account, written by trained chemists, reflects an academic research journey culminating in an appreciation of the importance of improving and enabling the overarching systems that plastics exist within. Our primary initial focus was on catalyst development because catalysts are key drivers of sustainability by improving the efficiency and ease of polymerization. Metal catalysts ranging in ligand structure and the incorporated metal(s) were developed for the preparation of traditional polyesters such as poly(lactic acid) and polycaprolactone. The central themes in these works were stereocontrol (tacticity), efficiency (polymerization rate), and versatility (monomer scope). Alongside insights gained by systematically varying catalyst structure came impressive results gained through collaboration, including the remarkably high activity of novel heterometallic zinc catalysts toward various cyclic esters.This catalysis work was complemented by and slowly transitioned to a focus on polymer functionality and monomer design. Several fundamental studies focus on polymer topology, specifically star-shaped polyesters, tuned arm number, length, and tacticity. These reports feature emphases on the end of life (solvolysis) and physical properties of polymers, which were increasingly important themes as work shifted toward new methods of incorporating functionality in polymers produced by ring-opening polymerization. Three key highlights demonstrate this shift: the first two rely upon the exploitation of olefin metathesis (cross- and ring-closing) to functionalize polyesters or polyethers, and the third involves the manipulation of ring-opening polymerization equilibrium to enable selective monomer recovery from a polyester. Our foundational work on 1,3-dioxolan-4-one (DOX) monomers is then discussed because this emerging class of molecules offers a distinct synthetic pathway toward functional polyesters, both conventional and novel. With this DOX framework, polyesters that are usually challenging to synthesize (e.g., poly(mandelic acid)) are accessible because polymerization is driven by the concomitant, controlled extrusion of small molecules (acetone or formaldehyde).After these polyester-focused highlights, the foundation of our ongoing work is presented, namely, that polymer sustainability must be viewed from a systems-level perspective, including economic and social components alongside the environmental considerations. Material design must be driven by practice, and we have to involve key players in academia, industry, and government in a concerted effort to enable positive and robust change. The key goal is to develop sustainable systems that retain plastics in their highest value state for as long as possible by designing materials and products for a particular (and assured) end-of-life fate, whether that be reuse, recycling, (bio)degradation, or energy recovery.

Investigation on metal coordination crosslinking nitrile butadiene rubber induced by the synergistic effect between tetramethylthiuram disulfide and cupric sulfate

ABSTRACT In this work, we described a simple method to manufacture a novel nitrile butadiene rubber (NBR) filled with cupric sulfate (CuSO4) and tetramethylthiuram disulfide (TMTD) via simple mixing and heat pressing. Cure characteristics analysis, the motion capability of polymer segments, physical properties, micromorphology, swelling properties and dynamic characteristics were explored comprehensively. The results demonstrated that the three-dimensional network was cross-linked by the metal coordination interactions between the nitrile group and copper ion. The cure curve, tensile strength and crosslinking density exhibited a considerable increasing with the addition of TMTD in NBR/CuSO4 compounds, which was due to the synergistic effect between Cu2+ and Me2NCSn• (n = 1–2) radicals generated by the pyrolysis of TMTD, resulting in the formation of the hyperactive compounds [Cu(SnCNMe2)]•2+ and promoting the coordination crosslinking between -CN and Cu2+ significantly. The NBR/CuSO4/TMTD vulcanizates induced by the synergistic effect would play a crucial role in practical application for the excellent physical properties.

Possibilities of Combining Water Permeability with Various Physical Properties of Polymers

Possibilities of Combining Water Permeability with Various Physical Properties of Polymers

Growth of complex crystal on biopolymer surface: Synthesis and characterization

Although the physical properties of polymers already have been modified by changing different synthetic parameters, the effect of the crystallization by the doping is still rarely explored. In this work, a facile synthesis of composite chitosan film with copper L-valinate crystal (CHLVCu) was investigate. Composite films were prepared by the addition of copper II L‐valine crystals (LVCu) in concentrations of 0.05, and 0.1 in 0.2% chitosan solution. The composite film of LVCu crystal dispersed in CH solution has been successfully obtained by the technique of solvent slow evaporation at low temperature. CHLVCu composite films are crystalline stabilizing the trans-LVCu phase. Homogeneity and low thermal stability have been proven by thermal measurements. The crystal growth takes place in the polymer surface. In addition, it is noteworthy that to the best of our knowledge, crystals complex of the LVCu has not been used as incorporate chitosan film and study has reported changes in physical properties composite film. The future this film can be application in area biomedical and technological.