Poly Methyl Methacrylate Polymer Research Articles

Synthesis and characterization of nano-biocomposite (PMMA-hydroxyapatite - CaZrO3) for bone tissue engineering

ABSTRACT In a common scenario, bone fractures have a self-healing function with free-surgical intervention. However, some fractures in bone tissue are complex and leave behind remnant deformation that requires biomaterials for replacement. The aim of this study is to develop a new composite 3D scaffold for bone regeneration and replacement composed of calcium zirconate (CaZrO3), hydroxyapatite (HA) and polymethylmethacrylate (PMMA) polymer. Different 3D scaffolds were fabricated by mixing 90, 80, 70, and 60 wt. % PMMA with HA and CaZrO3 nanoparticles in different concentrations. X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM) and atomic force microscopy (AFM) techniques were applied to characterize the 3D composite scaffold properties. Furthermore, the mechanical properties of the fabricated scaffolds were investigated using Brazilian diametral fracture test. It was found that incorporating a uniform distribution of HA nanoparticles significantly increased the surface roughness of the composite scaffold. Furthermore, the fracture strength of the fabricated 3D scaffolds showed a remarkable improvement of 86% in the sample containing 90% PMMA, 7% HA, and 3% CaZrO3 compared to the sample devoid of CaZrO3. Our findings strongly indicate that integrating hybrid CaZrO3-HA nanoparticles into PMMA polymer for the production of 3D composite scaffolds holds significant promise for bone tissue applications, potentially enhancing their efficacy and performance.

Evaluating the antifungal effectiveness, leaching characteristics, flexural strength, and impact strength of polymethyl methacrylate added with small-scale silver nanoparticles - An in vitro study.

(1) To assess the release of stable silver nanoparticles (AgNPs) of small scale dimension added to heat polymerized polymethyl methacrylate (PMMA) in 6 months. (2) Assessing the influence of incorporating minimal concentrations of stable AgNPs with nanoscale dimensions into heat polymerized PMMA over a 6 month period on its antifungal efficacy (AF), flexural strength (FS), and impact strength (IS). Incorporating nanoparticles with a very small scale may have minimal impact on mechanical properties due to their diminutive size. However, the influence of these small scaled nanoparticles on antimicrobial efficacy and potential escalation in toxicity to host cells through leaching remains unexplored. AgNPs were prepared using an Ultrasonic Probe sonicator and the addition of ammonia to obtain stabilized AgNPs (< 0.01 nm) of small scale dimension. The characterization of these AgNPs involved ultraviolet visible spectroscopy, X ray diffraction, Zetasizer, and transmission electron microscopy with energy dispersive spectroscopy (TEM). The prepared AgNPs were then added in various percentages by weight (0%-0.5%) to fabricate 252 modified PMMA samples of sizes 10 mm × 3 mm (AF, n = 108), 65 mm × 10 mm × 3 mm (FS, n = 72), and 65 mm × 10 mm × 2.5 mm (IS, n = 72) as per ADA specification no. 12. These samples underwent testing for leaching out of AgNPs and efficacy against Candida albicans for 6 months. The effect on FS and IS was evaluated using the three point bending test and Charpy's Impact Tester, respectively. Intergroup comparison of CFU between various concentrations of AgNP was done using the Kruskal-Wallis ANOVA test succeeded by Mann-Whitney test for pair wise comparisons. Difference in CFU of various concentrations over 6 months was seen using one way ANOVA test. Intergroup comparison of FS and IS was performed using a one way ANOVA test, followed by a post hoc Tukey's test for pair wise comparisons. Repeated tests showed no leaching out of AgNPs from the denture base resin into the storage medium. All concentrations of AgNPs incorporated in resin showed inhibition of Candida growth. Intergroup comparison of FS and IS revealed highly statistically significant differences (F = 15.076, P < 0.01 and F = 28.266, P < 0.01) between the groups showing a reduction in strength. The AgNPs of small scale dimension incorporated into the denture base resin imparted a strong antifungal effectiveness against C. albicans, which did not decline during the study period and did not cause any release of nanoparticles. 0.5% showed the best antifungal efficacy. This may prove to be a viable and highly effective treatment for the prevention of Candida associated denture stomatitis. However, the inclusion of these particles resulted in a decrease in both FS and IS, and this reduction was directly proportional to the percentage of added AgNPs, with 0.5% demonstrating the least IS and FS.

Design optimization for microstrip antennas based on polymethyl methacrylate (PMMA) substrate and carbon nanotube (CNT) conductive material in sub-6 Ghz band

Abstract Background The rapid expansion of modern smart applications, demanding faster data transfer and extensive bandwidth, has prompted the development of new-generation networks like 5G and 6G. These networks encompass additional frequency bands such as sub-6 GHz, millimeter waves, and terahertz bands to meet the growing bandwidth requirements. However, despite the substantial bandwidth available in these bands, several challenges must be addressed to overcome unfavorable propagation characteristics. Moreover, numerous applications necessitate wireless devices with antennas that exhibit high flexibility and exceptional radiation responses, particularly when subjected to bending effects. This requirement highlights the importance of polymers-based antennas that can adapt to changing conditions while maintaining optimal performance. The present comprehensive study delves into the performance evaluation of rectangular and circular microstrip antennas utilizing PMMA (polymethyl methacrylate) polymer substrate with varying thicknesses. Results Notably, CNTs (Carbon Nanotubes) are employed as an alternative to traditional copper for the conductive part and ground plane. Both PMMA-based antennas, integrated with CNTs, exhibit a compact footprint of 27.8 × 47.8 × 1.5 mm3 for the circular antenna and 22.8 × 39.5 × 1.5 mm3 for the rectangular antenna. Impressively, the realized gain of both antennas surpasses 5 dBi, demonstrating robust performance in both flat and bending scenarios across different substrate thicknesses. Conclusions The rectangular antenna achieves a bandwidth of approximately 200 MHz, while the circular microstrip antenna showcase annotable bandwidth of 500 MHz. These exceptional outcomes position the two microstrip antennas as highly suitable for a diverse range of emerging applications within the sub-6 GHz band (the frequency range below 6 GHz in the radio spectrum). Thus, the combination of PMMA substrate, CNTs and the compact form factor of the antennas presents a compelling solution for meeting the demands of modern applications requiring efficient wireless communication with enhanced performance and bandwidth.

Microplastic profile in the sediment of Jakarta Bay estuary, Indonesia: Characterization based on size fraction and the potential risk to the ecosystem

Jakarta Metropolitan is known as the most populated and busiest city in Indonesia and among the top urban areas in the world with a common problem of solid and liquid waste. The present study aimed to assess the occurrence of microplastic (MP) pollution in sediment from the downstream rivers and coastal water of Jakarta Bay and estimate the potential risk to the ecosystem. Two composite sediment samples (river and coastal) were collected from the Jakarta Bay estuary. Distribution of sediment size showed that the medium size (100–500 µm) was the most dominant in river and coastal samples. Our finding demonstrated the highest MP concentration reported from the estuary ecosystem, i.e., 1184–1337 particles/100 g of river sediment and 804–1055 particles/100 g of coastal sediment. Classification based on size category revealed that the medium size (100–500 µm) was the most dominant MP in river sediment, while the smaller one (50–100 µm) was the most dominant MP in the coastal sediment. The present study indicates that terrestrial origin contributes to the MP pollution of Jakarta Bay. Polypropylene (PP), polyethylene (PE), and polyethylene terephthalate (PET) were the most dominant polymers in the river and coastal sediments. The risk assessment of MP pollution in Jakarta Bay estuary potentially exhibits a very high risk to the ecosystem, primarily related to polymethyl methacrylate (PMMA), polyvinyl chloride (PVC), and polyurethane (PU) polymers and the MP sizes.

A Comparative Analysis of Bacterial Adhesion on Different Long-Term Provisional Fixed Prostheses Fabricated by CAD/CAM Milling, 3D Printing, and Heat Cure Technique: An In Vivo Study

ABSTRACT Objectives: This study compares the bacterial susceptibility to three different provisional restorations manufactured with different laboratory techniques, i.e., heat cure, CAD/CAM, and 3D printing Materials and Methods: Totally, 45 health patients with age group of 30–60 years undergoing complete veneer crown treatment were selected for the study and divided into three groups with 15 samples in each as Group I: the crowns were made from polymethyl methacrylate polymer fabricated by the conventional heat cure method, Group 2: the crowns were made from polymethyl methacrylate fabricated by subtractive manufacturing CAD/CAM method, and Group 3: the crowns were made from oligomers fabricated by additive manufacturing 3D printing. The samples were examined for bacterial adherence at scanning electron microscope. The colony-forming units (CFUs) were calculated, and statistically analyzed. Results: It has been determined that the digitally fabricated provisional restorations prove to be superior in terms of surface topography than to the conventionally fabricated provisional restorations Conclusion: The study concludes that 3D-printed provisional restorations are more precise with reduced bacterial susceptibility than milled ones.

Fabrication, structural, and enhanced mechanical behavior of MgO substituted PMMA composites for dental applications

The most common denture material used for dentistry is poly-methyl-methacrylate (PMMA). Usually, the polymeric PMMA material has numerous biological, mechanical and cost-effective shortcomings. Hence, to resolve such types of drawbacks, attempts have been made to investigate fillers of the PMMA like alumina (Al2O3), silica (SiO2), zirconia (ZrO2) etc. For the enhancement of the PMMA properties a suitable additive is required for its orthopedic applications. Herein, the main motive of this study was to synthesize a magnesium oxide (MgO) reinforced polymer-based hybrid nano-composites by using heat cure method with superior optical, biological and mechanical characteristics. For the structural and vibrational studies of the composites, XRD and FT-IR were carried out. Herein, the percentage of crystallinity for all the fabricated composites were also calculated and found to be 14.79–30.31. Various physical and optical parameters such as density, band gap, Urbach energy, cutoff energy, cutoff wavelength, steepness parameter, electron–phonon interaction, refractive index, and optical dielectric constant were also studied and their values are found to be in the range of 1.21–1.394 g/cm3, 5.44–5.48 eV, 0.167–0.027 eV, 5.68 eV, 218 nm, 0.156–0.962, 4.273–0.693, 1.937–1.932, and 3.752–3.731 respectively. To evaluate the mechanical properties like compressive strength, flexural strength, and fracture toughness of the composites a Universal Testing Machine (UTM) was used and their values were 60.3 and 101 MPa, 78 and 40.3 MPa, 5.85 and 9.8 MPa-m1/2 respectively. Tribological tests of the composites were also carried out. In order to check the toxicity, MTT assay was also carried out for the PM0 and PM15 [(x)MgO + (100 − x) (C5O2H8)n] (x = 0 and 15) composites. This study provides a comprehensive insight into the structural, physical, optical, and biological features of the fabricated PMMA-MgO composites, highlighting the potential of the PM15 composite with its enhanced density, mechanical strength, and excellent biocompatibility for denture applications.

Impact of a nanofiltration system on microplastic contamination in Geneva groundwater (Switzerland)

Microplastics (MPs) have been observed in the oceans, fresh waters, karstic water and remote water bodies. However, little is known on groundwater contamination, which is a natural resource of utmost importance for millions of people and is often perceived as a reliable source of water. Moreover, nanofiltration is perceived as a reliable technology to remove contaminants from water. In this study, large sample volumes of a silty-sandy gravel aquifer and the corresponding nanofiltered water were analysed for the presence of MPs (> 20 µm) using Fourier transform infrared (FTIR) microscopy. Concentration in ground water was 8 ± 7 MPs/m3 and increased to 36 ± 11 MPs/m3 in nanofiltered water. All MPs had a maximum Ferret diameter lower than 500 µm. Size distribution of MPs was towards the small size class (20–50 µm). In groundwater, 33% of MPs were detected in the smallest size class (20–50 µm) and 67% in the 50–100-µm-size class. In comparison, around 52% of MPs in nanofiltered water were observed in the 20–50 µm size class. Moreover, 33% of the MPs observed in nanofiltered water were in the 50–100 µm size class and 15% in the 100–500-µm-size class. From a chemical point of view, different plastic polymers were identified in groundwater and in nanofiltered water, such as polypropylene (PP), polyvinyl chloride (PVC), ethylene (vinyl acetate) copolymer (EVA), polyethylene (PE), polyethylene terephthalate (PET), polymethyl methacrylate (PMMA) and other polymer materials (such as polystyrene-based copolymers, vinyl-based copolymers). Fibres were observed in all samples, but only a small number of fibres (near 1%) were identified as PP synthetic fibres in nanofiltered water. Furthermore, no clear difference of fibre concentrations was observed between groundwater (232 ± 127 fibres/m3) and nanofiltered water (247 ± 118 fibres/m3). Groundwater had extremely low levels of microplastics, and although the nanofiltration effectively removes suspended particulate matter, it slightly contaminates the filtered water with MPs.

Probing the anharmonicity of vibrational polaritons with double-quantum two-dimensional infrared spectroscopy

Abstract Strong coupling between the molecular vibrations and electromagnetic fields of light confined to an infrared cavity leads to the formation of vibro-polaritons – quasi-particles thought to provide the means to control the rates of chemical reactions inside a dark cavity. Despite the mechanisms indicating how vibrational coupling to the vacuum fields can affect the reaction rates are still not well understood, it has been recently demonstrated that the formation of the polariton states alters the ultrafast relaxation dynamics of the strongly coupled system. The relaxation dynamics in molecules, which is known to be important for the chemical reactivity, is directed by anharmonic couplings involving multiple intra- and inter-molecular vibrational degrees of freedom. However, the impact of the molecular anharmonicity on the polariton states remains elusive. Some theoretical models, employed to interpret the experimental observations, assume that vibrational polaritons are harmonic. Others assume a certain anharmonicity of vibro-polaritons; however, to date, it has not been experimentally determined. Herein, we performed double-quantum two-dimensional third-order nonlinear infrared spectroscopy of the carbonyl stretching (C=O) vibrational modes in a thin film of polymethyl methacrylate polymer (PMMA) strongly coupled to the surface lattice resonances of the periodic arrays of half-wavelength infrared disk antennas. We found that, indeed, the mechanical anharmonicity of polaritons is very small. Quantitatively, our results place an upper bound on a polariton mechanical anharmonicity of 2 cm−1, compared with that of the C=O mode in a PMMA film of 15 cm−1. Thus, our results support previous assumptions regarding the harmonic character of vibro-polaritons.

Comparison of fracture strength, surface hardness, and color stain of conventionally fabricated, 3D printed, and CAD-CAM milled interim prosthodontic materials after thermocycling.

The purpose of this in vitro study was to investigate the fracture resistance, surface hardness, and color stain of 3D printed, CAD-CAM milled, and conventional interim materials. A total of 80 specimens were fabricated from auto polymerizing polymethyl methacrylate (PMMA), bis-acryl composite resin, CAD-CAM polymethyl methacrylate resin (milled), and 3D printed composite resin (printed) (n = 20). Forty of them were crown-shaped, on which fracture strength test was performed (n = 10). The others were disc-shaped specimens (10 mm × 2 mm) and divided into two groups for surface hardness and color stainability tests before and after thermal cycling in coffee solution (n = 10). Color parameters were measured with a spectrophotometer before and after each storage period, and color differences (CIEDE2000 [DE00]) were calculated. The distribution of variables was measured with the Kolmogorov Smirnov test, and one-way analysis of variance (ANOVA), Tukey HSD, Kruskal-Wallis, Mann-Whitney U tests were used in the analysis of quantitative independent data. Paired sample t-test was used in the analysis of dependent quantitative data (P < .05). The highest crown fracture resistance values were determined for the 3D printed composite resin (P < .05), and the lowest were observed in the bis-acryl composite resin (P < .05). Before and after thermal cycling, increase in mean hardness values were observed only in 3D printed composite resin (P < .05) and the highest ΔE00 value were observed in PMMA resin for all materials (P < .05). 3D printing and CAD-CAM milled interim materials showed better fracture strength. After the coffee thermal cycle, the highest surface hardness value was again found in 3D printing and CAD-CAM milled interim samples and the color change of the bis-acryl resin-based samples and the additive production technique was higher than the PMMA resin and CAD-CAM milled resin samples.

One-step synthesis of orange-red emissive carbon dots: photophysical insight into their excitation wavelength-independent and dependent luminescence.

A low-temperature method was developed to synthesize orange-red luminescence phosphor-doped carbon dots (CDs) without complicated purification procedures. These CDs showed excitation wavelength-independent narrow emission (photo-luminescence quantum yield, Φf ∼ 12 to 22%) with single exponential time-resolved decay in weakly polar/non-polar solvents, indicating the presence of one kind of chromophore. In contrast, the same CDs showed excitation wavelength-dependent broad emission (Φf ∼ 1 to 8%) with multi-exponential fluorescence decay in polar solvents. These CDs exhibited poor solubility in polar solvents, resulting in CD aggregates contributed by excitation wavelength-dependent weak luminescence. The CDs embedded in polymethyl methacrylate (PMMA) polymer film displayed bright orange-red fluorescence under UV 365 nm illumination, indicating their potential application in solid-state luminescence. Further, an analytical method was developed for the naked-eye detection of trifluoracetic acid (red emission) and triethylamine (green emission) under UV 365 nm illumination with reversible two switch-mode luminescence. Additionally, this efficient orange-red luminescence of CDs was utilized for possible bioimaging applications with negligible cytotoxicity in 3T3 mouse fibroblast cells.

Micro texturing and laser irradiation, two stimulus of growth and differentiation to neural like cell on the PMMA polymer

Nerve injuries and neurodegenerative disorders remain serious challenges due to the poor results of nerve cell regeneration. The most promising treatment for such injuries is treatments based on stimulating cells to grow and differentiate stem cells in that area into nerve cells, but there are obstacles in controlling the growth and differentiation into fully functional nerve cells and research is ongoing to overcome these obstacles. In this study, polymethyl methacrylate (PMMA) and its laser modified surfaces were used for cell culture and differentiation into neuron-like cells. In order to show the differentiation of PC12 cells into neuron-like cells, the expression levels of the neuronal markers Map2 and Synapsin-1 were examined. The results showed the growth of PC12 on raw PMMA was increased significantly compared to the control group and micrometric parallel grooves lead to a significant difference in cell growth compared to raw PMMA. Also, the simultaneous irradiation of laser to the cell cultured on PMMA caused more cell adhesion on the surface, faster growth and differentiation of PC12 into neuron-like cells.

Terahertz spectroscopy research on motion‐limited molecular chain of random polymethacrylate

AbstractIn this study, an innovative method was used to examine the impact of gamma‐ray irradiation on three specific monomers: methyl methacrylate (MMA), hexyl methacrylate (HMA), and lauryl methacrylate (LMA). The primary objective was to produce corresponding polymers—polymethyl methacrylate (PMMA), polyhexyl methacrylate (PHMA), and poly(lauryl methacrylate) (PLMA). The significance of the research was determined by conducting a thorough analysis of the thermal properties and structural characteristics of these polymers using advanced techniques, including thermogravimetric analysis and differential scanning calorimetry (TGA‐DSC), as well as Fourier transform infrared spectroscopy (FTIR). The results indicated that irradiation at a 30 kGy dose caused distinct decomposition of ester groups within the polymer matrices. Additionally, a clear trend was observed in the maximum exothermic temperature among the three polymers, with PMMA exhibiting the lowest temperature, followed by PLMA, and PHMA with the highest temperature. Surprisingly, when the radiation dose exceeded 30 kGy, PHMA's thermal stability peaked, demonstrating remarkable resistance to further changes. This highlights the crucial role of radiation dosage in adjusting polymer thermal properties. Furthermore, analysis of infrared characteristic peaks identified a critical radiation dose range between 15 and 30 kGy, where polymerization was efficiently promoted without generating extra by‐products, showcasing experimental ingenuity. Lastly, optical properties of the synthesized polymers were explored using THz time‐domain spectroscopy. Results showed intriguing changes in refractive indices following 30 kGy dose irradiation. Specifically, MMA and HMA exhibited moderate refractive index increases, while LMA displayed a significant decrease. Notably, PHMA demonstrated substantial absorption reduction beyond 15 kGy doses, with minimal further changes, highlighting the potential to customize polymer optical properties through controlled irradiation.

Understanding significantly reinforced polymethyl methacrylate composites induced by two‐dimensional Tin+1Cn from an atomistic perspective

AbstractMXenes, which have good reinforcing and toughening effects, can serve as excellent polymer additives. However, the mechanism whereby MXenes act has not been revealed. In this study, to understand the reinforcement effect of Tin+1Cn on polymethyl methacrylate (PMMA) from an atomistic perspective, we used molecular dynamics to conduct unidirectional tensile simulations of PMMA composites reinforced with monolayer Ti2C and Ti3C2 sheets. The results showed that Ti3C2 can more significantly improve the mechanical properties of the PMMA polymer than Ti2C, and the yield stress and Young's modulus of the Ti3C2/PMMA complexes were respectively 54.39% and 73.46% higher than the Ti2C/PMMA complexes. To further reveal the interaction mechanism between Tin+1Cn and PMMA, different separation speeds were used to simulate the pull‐out of Tin+1Cn from the PMMA matrix. The results showed that, in addition to the enhancement of interfacial strength by non‐bonding van der Waals forces, there were TiO and CTi bonds between Tin+1Cn and PMMA, which further increased the interfacial strength. Ti3C2 formed a denser interfacial region with PMMA, it could more effectively resist the formation and expansion of cracks. These findings may provide an important theoretical basis to design new type of MXene/polymer composites with excellent mechanical properties.Highlights MXene greatly improved the mechanical properties of the PMMA matrix. Formation of chemical bonds improved connection between the MXene and PMMA. The addition of MXene slows down the rate of crack propagation in PMMA.

Structural, Optical and Electrical Studies on Poly(methyl methacrylate) Polymer Loaded with CuCo2O4/CuS Mixtures

Polymethyl methacrylate (PMMA)/(1-x)CuCo2O4/xCuS (x = 0, 0.1, 0.25, 0.5) nanocomposites polymers were formed using hydrothermal, solid state and solvent casting procedures. The structure of the filler and polymer nano-composite samples were examined using an X-ray diffraction technique. The impacts of the (1-x)CuCo2O4/xCuS mixture on the diffuse absorption, transmittance, reflectance, extinction coefficient, refractive index, optical dielectric constant, energy loss functions and optical conductivity were investigated. The absorbance of PMMA/(1-x)CuCo2O4/xCuS changed depending on the percentage of CuS in the nanocomposite. The optical band gaps (Eg ) for PMMA were 4.52 and 4.46 eV, directly and indirectly, respectively. The sample with x = 0.25 produced the lowest direct/indirect Eg values, 4.34 and 3.79 eV. The fluorescence spectra of the undoped and doped PMMA polymers were explored. Depending on the filler composition in the PMMA/(1-x)CuCo2O4/xCuS samples, the emitted colors could be modulated. The effects of the (1-x)CuCo2O4/xCuS mixture as a function of the dielectric constant, dielectric loss, ac conductivity and electric modulus of the host polymer were examined.

Design, fabrication and characterization of SU-8 and PMMA grating couplers

Grating couplers utilize light diffraction to achieve vertical coupling between waveguides and optical fibers. We proposed using SU-8 or polymethyl methacrylate (PMMA) polymer materials as the waveguide core layer and polydimethylsiloxane (PDMS) as the cladding layer for the grating coupler and completed the fabrication of both uniform and convergent grating couplers. We studied the effect of waveguide layer thickness, etching depth, and grating period on the uniformity of grating coupling performance. The influence of the convergence angle on the coupling performance of the convergence grating is investigated, and the optimal parameters are finally determined. The experimental results show that the coupling efficiency of the SU-8 uniform grating coupler reaches 30.1% and the 3 dB bandwidth is 70 nm when the grating period length is 4μm. For the SU-8 convergent grating coupler, the coupling efficiency reaches 40.0%, and the bandwidth is 65 nm when the convergence angle is 20°. The coupling efficiency of the PMMA grating coupler is lower than that of the SU-8 grating coupler; the coupling efficiency reaches 29.0% when the grating period of the uniform grating coupler is 4μm and 35.1% when the convergence angle of the convergent grating coupler is 20°.

Surfactant-Dependent Bulk Scale Mechanochemical Synthesis of CsPbBr3 Nanocrystals for Plastic Scintillator-Based X-ray Imaging.

We report a facile, solvent-free surfactant-dependent mechanochemical synthesis of highly luminescent CsPbBr3 nanocrystals (NCs) and study their scintillation properties. A small amount of surfactant oleylamine (OAM) plays an important role in the two-step ball milling method to control the size and emission properties of the NCs. The solid-state synthesized perovskite NCs exhibit a high photoluminescence quantum yield (PLQY) of up to 88% with excellent stability. CsPbBr3 NCs capped with different amounts of surfactant were dispersed in toluene and mixed with polymethyl methacrylate (PMMA) polymer and cast into scintillator discs. With increasing concentration of OAM during synthesis, the PL yield of CsPbBr3/PMMA nanocomposite was increased, which is attributed to reduced NC aggregation and PL quenching. We also varied the perovskite loading concentration in the nanocomposite and studied the resulting emission properties. The most intense PL emission was observed from the 2% perovskite-loaded disc, while the 10% loaded disc exhibited the highest radioluminescence (RL) emission from 50 kV X-rays. The strong RL yield may be attributed to the deep penetration of X-rays into the composite, combined with the large interaction cross-section of the X-rays with the high-Z atoms within the NCs. The nanocomposite disc shows an intense RL emission peak centered at 536 nm and a fast RL decay time of 29.4 ns. Further, we have demonstrated the X-ray imaging performance of a 10% CsPbBr3 NC-loaded nanocomposite disc.

Numerical Simulation of PMMA Impact Based on the J–C Constitutive and Damage Models under Hydrostatic Pressure Loading

Polymethyl methacrylate (PMMA) polymer is widely used in various fields today. In order to reveal the structural impact performance of PMMA materials in underwater engineering thoroughly, this paper firstly proposed a simplified plate model for a spherical shell hull under concentrative impact loading. Then, to simulate the hyper-elastic material properties of PMMA in the impact process, the Johnson–Cook constitutive model and damage failure model were adopted. And the least squares method was used to confirm accurately the J–C constitutive and damage failure model parameters of PMMA through material test data. Moreover, the dynamic process of the steel bullet impacting the PMMA plate structure was analyzed by the finite element software ABAQUS. The calculation results show that the numerical simulation results in this paper have a good convergence, and the residual velocities at different initial velocities and thicknesses of plates are in good agreement with the experimental test data. Therefore, the feasibility and accuracy of the impact analysis of PMMA structures based on J–C constitutive and damage failure models in this paper are verified accordingly. Finally, based on the presented finite element model, the structure response and the variation of residual velocity of the bullet with the PMMA plate thickness was analyzed in depth; that is, the results show that the residual velocity of the bullet has a certain linear relationship with the thickness, even in an underwater environment, and even in an underwater environment will increase both with a thicker structure or a higher pressure.

Evaluation and Comparison of Impact Strength and Transverse Strength of Heat Polymerized Polymethylmethacrylate (PMMA) Denture Base Resin Repaired Using Heat Polymerizied PMMA Denture Base Resin, Auto-Polymerized PMMA Resin and A New Light Polymerizied Denture Resin: An In Vitro Study.

Repaired denture prosthesisdemands adequate transverse and impact strength. A new repairdenture base resin- "Lukafix" require to fulfil these criteria. This study evaluates and compares the transverse and impact strength of heat polymerizing, auto polymerizing and LUKAfix denture resin. 20 specimens were control(without repair), and other were test specimens which were fractured and repaired with heat polymerized PMMA resin, chemically polymerized PMMA resin and LUKAfix light polymerizing denture resin. Each group wasdivided in two subgroups. Subgroup A was subjected to transverse strength test and subgroup B to impact strength test. One way ANOVA was used to identify the mean difference among the four groups. Post-Hoc-Bonferroni was done to observe the difference between the groups. Maximum transverse strength was observed in specimens repaired with heat polymerized (48.33 ± 9.19) and least in LUKAfix denture resin (6.56 ± 1.15). Also, impact strength was maximum for heat polymerized (3.64 ± 0.41) followed by LUKAfix denture resin (2.34 ± 0.44). Repair with LUKAfix denture resin resulted inferior transverse and impact strength as compared to heat polymerized PMMA resin.

A Polymer-Based Indicator for Detecting Dexamethasone in Herbal Medicine Using Polymethylmethacrylate (PMMA)

Dexamethasone is a chemical drug that is usually added to herbal medicine because of its effects on pain relief, arthritis, anti-inflammation, etc. Chemical drugs should not be used in herbal medicine because uncontrolled consumption causes some side effects. A polymer-based indicator was developed to detect dexamethasone in herbal medicine samples in a fast and simple way compared to instrumental analysis. The indicator strips were made by mixing polymethylmethacrylate (PMMA) polymer with sulfuric acid (H2SO4) as a reagent. When reacting with dexamethasone, H2SO4 can cause the color to change into a specific light pink-purple color. Indicator strips were prepared with a composition of 5% PMMA in ethyl acetate:H2SO4 (9:1) by using the reagent blending method. The indicator strips showed a pink-purple color when they were applied to a positive herb containing dexamethasone. The indicator strips could selectively detect dexamethasone rather than other active substances that are often found in herbal medicine. These indicator strips could also detect dexamethasone with the smallest detection limit of 13.13 ppm, and they had a stability of up to 36 days. Detection was carried out in real samples to show the performance of the indicator strips. The result showed that of nine samples, five were confirmed to contain dexamethasone. These results showed a good agreement with the results of thin-layer chromatography (TLC) and high-performance liquid chromatography (HPLC). According to the result, these indicator strips provide a simple and applicable method for on-site analysis to detect dexamethasone in samples.

An Investigation of High-Performance Pressure Sensor Employing a Polymer-Defect-Based 1D Annular Photonic Crystal

This study aims to theoretically address the design and analysis of an efficient pressure sensor designed using a polymer-based defective 1D annular photonic crystal (APC). The 1D APC comprises an alternate arrangement of Si and SiO2 in a cylindrical fashion, incorporating a central defect layer. The investigation of the reflectance characteristics of the proposed structure is conducted by separately considering the polystyrene (PS) and the polymethyl methacrylate (PMMA) polymer materials as the defect layer. The pressure-sensitive refractive index of the polymers and the constituent materials of the APC play a vital role in envisaging the pressure-sensing application. The cornerstone of this study is represented by the shift analysis regarding the wavelength of the defect mode inside the band gap using different applied pressures, employing the modified transfer matrix method (MTMM). Various geometrical parameters like the defect polymer layer’s thickness and the APC period were carefully optimized to achieve an improved sensing performance. The proposed design demonstrated a remarkable pressure sensitivity and FoM of 51.29 nm/GPa and 301.7 GPa−1, respectively, which is considerably high in the current research scenario. It is believed that the proposed structure can be an apt candidate for an innovative high-performance pressure sensor, and could play a key role in photonic integrated circuits.