Polymer-based Column Research Articles

Development of a novel comprehensive analytical method for volatile compounds using supercritical fluid chromatography/mass spectrometry with a highly cross-linked styrene divinylbenzene polymer-based column.

Analytical techniques to determine volatile compounds such as flavor, aroma, and fragrances are in high demand due to their wide range of applications in industry, the chemical properties of them are very diverse. Supercritical fluid chromatography (SFC) is capable of high speed, high peak capacity separation and has a high separation coverage. It is also an advantageous for preparative purifications due to its unique mobile phase conditions. However, there is no column commercially available for SFC that is suitable to comprehensively separate volatile compounds. SFC is limited to the use of silica-based columns due to weak retentions and polymer-based column issues such as pressure, swelling and shrinkage tolerances. This study demonstrated comprehensive analytical method for volatile in SFC using a highly cross-linked styrene divinylbenzene (SDVB) polymer-based column, newly developed for SFC. In this study, 23 typical volatile compounds with a wide variety of chemical properties were selected as model compounds. The newly developed SDVB column showed, compared to conventional silica-based columns (k > 0.3), an excellent overall and substantial improved retentions (k > 1.6) under SFC mobile phase conditions. It was also able to retain esters (hydroxy acetate, pentyl butylate, methyl salicylate) and non-polar terpenes (limonene, pinene) that did not show sufficient retention in any other commercially available silica-based columns. Aldehydes reacting on NH2 column due to Schiff base formation were also successfully eluted. It was confirmed that SDVB column provided comprehensive separation and wide coverage for volatile compounds.

Molecular Weights of Bovine and Porcine Heparin Samples: Comparison of Chromatographic Methods and Results of a Collaborative Survey.

In a collaborative study involving six laboratories in the USA, Europe, and India the molecular weight distributions of a panel of heparin sodium samples were determined, in order to compare heparin sodium of bovine intestinal origin with that of bovine lung and porcine intestinal origin. Porcine samples met the current criteria as laid out in the USP Heparin Sodium monograph. Bovine lung heparin samples had consistently lower average molecular weights. Bovine intestinal heparin was variable in molecular weight; some samples fell below the USP limits, some fell within these limits and others fell above the upper limits. These data will inform the establishment of pharmacopeial acceptance criteria for heparin sodium derived from bovine intestinal mucosa. The method for MW determination as described in the USP monograph uses a single, broad standard calibrant to characterize the chromatographic profile of heparin sodium on high-resolution silica-based GPC columns. These columns may be short-lived in some laboratories. Using the panel of samples described above, methods based on the use of robust polymer-based columns have been developed. In addition to the use of the USP’s broad standard calibrant for heparin sodium with these columns, a set of conditions have been devised that allow light-scattering detected molecular weight characterization of heparin sodium, giving results that agree well with the monograph method. These findings may facilitate the validation of variant chromatographic methods with some practical advantages over the USP monograph method.

Molecularly imprinted polymer-high performance liquid chromatography for the determination of tetracycline drugs in animal derived foods

In this study, a molecularly imprinted polymer solid phase extraction method combining high performance liquid chromatography was developed to determine the residues of tetracycline drugs in animal derived foods. The polymer was synthesized with chlortetracycline as template molecule, methacrylic acid as functional monomer at template/monomer ratio of 1:4. The prepared solid phase extraction column was able to capture four tetracyclines simultaneously with high adsorption capacities (3560–4700 ng) and high recoveries (>87%), and was able to be reused for at least thirty times. The limits of detection were in a range of 20–40 ng/g, and the recoveries from fortified blank samples (milk, egg and pork) were in a range of 74%–93%. Furthermore, the polymer-based column achieved better purification effect than three commercial solid phase extraction columns. This is the first study reporting the use of chlortetracycline based molecularly imprinted polymer for determination of tetracyclines in animal derived foods.

Determination of Anions and Cations in Biodiesel with On-line Sample Pretreatment Column-switching Ion Chromatography

An ion chromatographic approach with on-line sample pretreatment column-switching technique was proposed for the determination of anions and cations in biodiesel. By the employment of the column-switching technique combined with a polymer-based reversed-phase column (An IonPac NG1 guard column), organic residues in the aqueous extracts of biodiesel samples could be on-line removed automatically before flowing into analytical columns. An IonPac AG 11–HC guard column and IonPac AS 11–HC separation column were utilized for the anion separation, whereas an IonPac CG 12A guard column and IonPac CS12A was utilized for cations. Under the optimized separation conditions, a series of standard solutions consisting of nine anions of various concentrations from 0.05 to 40 mg/kg were analyzed with correlation coefficients r ≥ 0.9990, as well as six cations of various concentrations from 0.05 to 20 mg/kg. The limits of detection were in the range of 3.2 to 23.3 µg/kg for anions and 5.1 to 31.3 µg/kg for cations. Relative standard deviations of both anions and cations for retention time, peak area, and peak height were less than 2.98%. A spiking study was performed with satisfactory recoveries between 88.6 and 104.0% for all ions. The chromatographic system was successfully applied to the analysis of five biodiesel samples.

Hydrophilic interaction liquid chromatography coupled with tandem mass spectrometry for the quantification of uridine diphosphate-glucose, uridine diphosphate-glucuronic acid, deoxynivalenol and its glucoside: In-house validation and application to wheat

Nucleotide sugars, the activated forms of monosaccharides, are important metabolites involved in a multitude of cellular processes including glycosylation of xenobiotics. Especially in plants, UDP-glucose is one of the most prominent members among these nucleotide-sugars, as it is involved in the formation of glucose conjugates of xenobiotics, including mycotoxins, but also holds a central role in the interconversion of energized sugars such as the formation of UDP-glucuronic acid required for cell wall biosynthesis. Here, we present the first HILIC–LC–ESI-TQ–MS/MS method for the quantification of UDP-glucose and UDP-glucuronic acid together with the Fusarium toxin deoxynivalenol (DON) and its major plant detoxification product DON-3-O-glucoside (DON-3-Glc) utilizing a polymer-based column. For sample preparation a time-effective and straightforward ‘dilute and shoot’ protocol was applied. The chromatographic run time was minimized to 9min including proper column re-equilibration. In-house validation of the method verified its linear range, intra- (1–7%) and interday (8–20%) precision, instrumental LODs between 0.6 and 10ngmL−1, selectivity and moderate matrix effects with mean recoveries of 85–103%. To prove the methods applicability, we analyzed two sets of wheat extracts obtained from different cultivars grown under standardized greenhouse conditions. The results clearly demonstrated the suitability of the developed method to quantify UDP-glucose, DON and its masked form D3G in diluted wheat extracts. We observed differing concentration levels of UDP-glucose in the two wheat cultivars showing different resistance to the severe plant disease Fusarium head blight. We propose that the higher ability to detoxify DON into DON-3-Glc might be a consequence of the higher cellular UDP-glucose pool in the resistant cultivar.

Novel, Precise, Accurate Ion-Pairing Method to Determine the Related Substances of the Fondaparinux Sodium Drug Substance: Low-Molecular-Weight Heparin.

Fondaparinux sodium is a synthetic low-molecular-weight heparin (LMWH). This medication is an anticoagulant or a blood thinner, prescribed for the treatment of pulmonary embolism and prevention and treatment of deep vein thrombosis. Its determination in the presence of related impurities was studied and validated by a novel ion-pair HPLC method. The separation of the drug and its degradation products was achieved with the polymer-based PLRPs column (250 mm × 4.6 mm; 5 μm) in gradient elution mode. The mixture of 100 mM n-hexylamine and 100 mM acetic acid in water was used as buffer solution. Mobile phase A and mobile phase B were prepared by mixing the buffer and acetonitrile in the ratio of 90:10 (v/v) and 20:80 (v/v), respectively. Mobile phases were delivered in isocratic mode (2% B for 0–5 min) followed by gradient mode (2–85% B in 5–60 min). An Evaporative Light Scattering Detector (ELSD) was connected to the LC system to detect the responses of chromatographic separation. Further, the drug was subjected to stress studies for acidic, basic, oxidative, photolytic, and thermal degradations as per ICH guidelines and the drug was found to be labile in acid, base hydrolysis, and oxidation, while stable in neutral, thermal, and photolytic degradation conditions. The method provided linear responses over the concentration range of the LOQ to 0.30% for each impurity with respect to the analyte concentration of 12.5 mg/mL, and regression analysis showed a correlation coefficient value (r2) of more than 0.99 for all the impurities. The LOD and LOQ were found to be 1.4 µg/mL and 4.1 µg/mL, respectively, for fondaparinux. The developed ion-pair method was validated as per ICH guidelines with respect to accuracy, selectivity, precision, linearity, and robustness.

"One-shot" analysis of PDE-5 inhibitors and analogues in counterfeit herbal natural products using an LC-DAD-QTOF system.

A highly selective and robust method for simultaneous screening and confirmation of target and non-target phosphodiesterase type 5 (PDE-5) inhibitor analogues within a single chromatographic run in counterfeit herbal products was developed. The protocol, based on an easy and rapid extraction with a water/acetonitrile 1% formic acid solution, followed by sonication and centrifugation, exploits an LC-diode array detector-quadrupole-time-of-flight (DAD-QTOF) system. The extraction method was optimized both at high concentrations and at trace levels. These two situations are typically encountered in pharmaceutical formulations and herbal food supplements. Carryover effects, never reported before and occurring mainly for vardenafil, were overcome using a polymer-based column. An in-house validation was carried out using five blanks of different bulk matrices spiked with seven standard analytes, namely yohimbine, sildenafil, vardenafil, tadalafil, homosildenafil, pseudovardenafil and hydroxyhomovardenafil. Reliable quantitation was possible using a conventional standard solution for all the pharmaceutical and herbal samples considered, as matrix effects were eliminated. Accuracy ranged from 80.9 to 108.1% with overall relative standard deviation (RSD) <11% (N = 15), measured at 1.0, 5.0 and 10.0μg/g. Limits of detection (LODs) obtained ensured the determination of cross contaminations at nanogram per gram levels. A database with 82 PDE-5 inhibitor analogues was implemented for automatic non-target analysis. Among the 26 samples of dietary supplements and herbal remedies bulk marketed for erectile dysfunctions, three samples were found to be contaminated with both registered and unregistered synthetic PDE-5 inhibitors, i.e. yohimbine, sildenafil, dimethylsildenafil and thiodimethylsildenafil or thiomethisosildenafil. The occurrence of such contaminations, both at trace levels and at pharmaceutical dosage, indicates the illicit use of synthetic PDE-5 analogues. Graphical Abstract Examples of pharmaceutical formulations and herbal natural products marketed for the erectile dysfunction.

Analysis of cholesterol levels in lipoprotein(a) with anion-exchange chromatography

We previously established an analysis method for determining the cholesterol levels of five major lipoprotein classes [HDL, LDL, intermediate density lipoprotein (IDL), VLDL, and chylomicrons] in serum by an anion-exchange (AEX)-HPLC method, but lipoprotein(a) [Lp(a)], a well-known risk factor for atherosclerotic diseases, was not determinable. Therefore, we established new AEX-HPLC separation conditions for analyzing the cholesterol levels of six lipoprotein classes, including Lp(a). Serum lipoproteins were separated by HPLC with a diethylaminoethyl-ligand nonporous polymer-based column by elution with a stepwise gradient of the sodium perchlorate concentration. In this improved method, HDL, LDL, IDL, VLDL, chylomicrons, and Lp(a) were each eluted from the column. The cholesterol levels of the eluted lipoproteins were measured enzymatically by a postcolumn reaction. The within-day assay and between-day assay coefficients of variation for the lipoprotein cholesterol levels were in the ranges of 0.29-11.86% and 0.57-11.99%, respectively. The Lp(a) cholesterol levels determined by AEX-HPLC were significantly correlated with the amounts of Lp(a) protein measured by an immunoturbidimetry method available commercially (r = 0.9503, P < 0.0001). Taken together, this AEX-HPLC method may be effectively applied to the analysis of serum lipoproteins with high levels of Lp(a).

Metabolite analysis of [18F]Florbetaben (BAY 94-9172) in human subjects: a substudy within a proof of mechanism clinical trial

[18F]Florbetaben ([18F]BAY 94-9172) is a promising β-amyloid (Aβ) targeted PET-tracer currently in late stage clinical development. [18F]Florbetaben can assist in the more accurate diagnosis of Alzheimer’s Disease (AD) by non-invasive, in vivo detection of Aβ in the brain. To determine the arterial input function of the PET tracer—as part of a proof of mechanism (PoM) study—arterial samples were drawn from all subjects at predefined time points post injection (p.i.), and the proportion of unchanged tracer [18F]Florbetaben was determined by HPLC analysis. Plasma metabolite profiles were investigated following intravenous administration of 300 MBq (±60 MBq) of [18F]Florbetaben to both, patients with AD and healthy controls (HCs), and various methods for processing the blood samples were evaluated. Addition of acetonitrile to plasma samples (obtained from whole blood by centrifugation) and precipitation of proteins resulted in a recovery of more than 90% of the initial radioactivity in the supernatants. High Performance Liquid Chromatography using a polymer-based column (PRP-1) in conjunction with gradient elution was found to be a suitable method of metabolite analysis of [18F]Florbetaben. HPLC analyses indicated that [18F]Florbetaben is rapidly metabolized in vivo with an estimated initial half-life of about 6 min. A polar metabolite fraction, consisting presumably of more than one component, and (to a smaller extent) of the demethylated derivative of [18F]Florbetaben were time-dependently detected in plasma.

HILIC methods in pharmaceutical analysis

In this review, hydrophilic interaction liquid chromatographic (HILIC) applications for pharmaceutical analysis are discussed. The HILIC technique uses an aqueous/organic modifier mobile phase with a high organic modifier fraction and a hydrophilic stationary phase (SP). In general, the SPs are silica or polymer based. The silica-based columns are most often applied and are divided into bare-silica particle, chemically bonded silica particle, and monolithic phases. The bare-silica columns are most frequently used. The much less applied polymer-based columns are also divided into particle and monolithic phases. In this review, the applications are grouped and discussed according to the SP type used. Whenever possible, the considered HILIC application is compared with other HILIC methods, e.g. on other SPs, and/or with other separation modes, for that application. The advantages and drawbacks of HILIC are also discussed, as well as the method validation issues, when executed.

A fully automated phosphopeptide purification system for large-scale phosphoproteome analysis

For large-scale phosphoproteome analysis based on mass spectrometry, a fully automated phosphopeptide purification system is essential to obtain reproducible results. An automated system involving pre-cleaning of a sample with a polymer-based reversed-phase column, phosphopeptide purification with a titania column and analysis of the phosphopeptide fraction with a reversed-phase column was developed, and then the analytical conditions for a complex peptide mixture were optimized. A lower flow rate for application of samples to the titania column was essential to obtain high recoveries of phosphopeptides from complex protein digests. Washing with 1 M NaCl and 2-propanol, and two cycles of washing with four solvents for the titania column were necessary to minimize non-phosphorylated peptides in the phosphopeptide fraction. Using this system under the optimized conditions, a peptide fraction including >90% phosphopeptides could be obtained highly reproducibly from a tryptic digest of a complex protein mixture, i.e. a Xenopus egg cytosol fraction, without any pre-treatment.

Fluorometric determination of nitrite with 2,3-diaminonaphthalene by reverse phase HPLC under alkaline conditions

Introduction In this study, a simple and sensitive fluorometric HPLC method was described for the determination of nitrite, an indicator of nitric oxide production in biological samples. Methods Nitrite was reacted with 2,3-diaminonaphthalene (DAN) to form fluorescent 2,3-naphthotriazole (NAT). Because NAT has higher fluorescence intensity at alkaline conditions, a reverse phase HPLC method employing a polymer-based column was applied to separate NAT using an alkaline mobile phase system. Results NAT was well separated from DAN and other fluorescent substances with increased detection sensitivity under alkaline conditions. A linear relationship ( r = 0.999) between the fluorescence intensity of NAT and the concentration of nitrite was observed in the range from 0 to 800 nM with the detection limit of about 25 nM. Discussion The present HPLC method appears suitable for routine analysis of nitrite in crude biological samples, since the polymer-based column can withstand rigorous cleaning with either acid or base.

SEC Characterization of Au Nanoparticles Prepared through Seed-Assisted Synthesis

In this paper we report the use of size-exclusion chromatography (SEC) for rapid determination of the sizes and size distributions of Au nanoparticles (NPs) prepared by seed-assisted synthesis. Analytical separation of Au NPs was performed in a polymer-based column of pore size 400 nm. We characterized the sizes and size distributions of the Au NPs by using 10 mM sodium dodecyl sulfate (SDS) as mobile phase and obtained a linear relationship (R 2 = 0.986) between retention time and size of Au NPs within the range 9.8–79.1 nm; the relative standard deviations of these retention times were less than 0.3%. These separation conditions were used to characterize the sizes and size distributions of Au NPs prepared by seed-assisted synthesis. In addition to observing the elution times of the Au NPs we also simultaneously characterized their size-dependent optical properties by spectral measurement of the eluting peaks by use of an on-line diode-array detector (DAD), i.e., monitoring of the stability of the Au NP products. By using this approach we found the presence of SDS was beneficial in stabilizing the synthesized Au NPs. We also found that the volume of Au metal ions used affected the sizes of the final products. SEC seems an efficient tool for characterizing the sizes of NPs fabricated by seed-assisted synthesis.

Spherical Siliceous Mesocellular Foam Particles for High-Speed Size Exclusion Chromatography

Spherical micrometer-sized siliceous mesocellular foam (MCF) particles with narrow window size distributions and ultralarge pore volumes were synthesized and used as packing materials for size exclusion chromatography (SEC). MCF columns exhibited excellent size exclusion properties in separating polystyrenes in organic media. The window size of spherical MCF could be tailored between 10 and 26 nm without affecting the particle morphology, allowing this packing material to be used for analyzing different molecular weight ranges. Compared to a conventional SEC system consisting of two polymer-based columns, a single, smaller MCF column could achieve similarly high resolution with significantly reduced analysis time and solvent consumption. The MCF column also exhibited better separation capability than a commercial silica-based SEC column of the same dimensions. These advantages could be attributed to the ultrahigh porosity of MCF materials. Spherical MCF particles were demonstrated to be an excellent packing material for SEC, especially for high-speed applications.

Improved chromatographic separation of thio-arsenic compounds by reversed-phase high performance liquid chromatography-inductively coupled plasma mass spectrometry

A new group of arsenic species, thio-arsenicals, have recently been reported in several natural samples such as molluscs, algae, and urine. These compounds are the sulfur analogues of oxo-arsenicals, a large group of naturally-occurring compounds, whereby the arsinoyl (As O) group is substituted by an arsinothioyl group (As S). The most common separation technique for oxo-arsenicals is anion-exchange HPLC with polymer-based columns, but under these conditions the thio-arsenicals show strong retention, resulting in unacceptably long analysis times and broad peaks. We report the development of a reversed-phase HPLC method, with ICPMS detection, which allows separation of the known thio-arsenicals within 15 min with significantly improved peak shapes. The detection limit is about 0.6 μg As/L based on 10 μL injection volume. Further, we have applied the method to the identification and quantification of thio-arsenic species in two standard reference materials, BCR 710 oyster tissue and NIES 18 human urine.

Stationary phase-based two-dimensional chromatography combining both covalent and noncovalent interactions on a single HPLC column

A new type of 2-D separation material was synthesized and studied. The material is suitable for 2-D chromatography utilizing both covalent and noncovalent interactions. The first dimension is boronate affinity chromatography, and the second dimension is RP chromatography (or vice versa). The polymeric media were prepared using p-vinylphenylboronic acid as the functional monomer. This monomer was selected due to the presence of the boronic acid group for the cis-diol/boronate interaction in boronate chromatography. Two crosslinkers were evaluated, namely ethylene glycol dimethacrylate and divinylbenzene. The crosslinker content was varied to maximize the polymer strength and the RP performance of the packed column. Several parameters were evaluated to define the optimum for polymer strength and column performance including crosslinker, porogen, initiator, and column-packing parameters. The polymer-based HPLC columns were successful in separating phenol, catechol, dimethylphthalate, and hydroquinone under RP conditions, and thus can be used as an RP HPLC column. The columns were also successful in separating catechol and adenosine under boronate chromatography conditions, and thus can be used as a boronate affinity column. Moreover, the two types of chromatography can be performed consecutively on the same column during one complete chromatographic run, making it a 2-D chromatography. Under these 2-D conditions, the catechol was separated from a mixture of phenol, catechol, dimethylphthalate, and hydroquinone; the adenosine ribonucleoside was separated from a mixture of adenosine ribonucleoside, adenosine deoxyribonucleoside, and uridine deoxyribonucleoside. This type of single-column 2-D HPLC eliminates the requirement of a complex and expensive multidimensional HPLC instrument and provides increased peak capacity for separation.

Arginine as an effective additive in gel permeation chromatography

A major problem in gel permeation chromatography (GPC) or size exclusion chromatography is non-specific binding of applied proteins to the column matrix (stationary phase). We have tested an aqueous arginine solution as the GPC mobile phase on silica-based and polymer-based columns, using mouse monoclonal antibody and recombinant human activin, interleukin-6, basic fibroblast growth factor, and interferon-γ as model proteins. We observed that addition of arginine to the mobile phase improves separation of the proteins and their soluble aggregates from the GPC columns, which suggests that arginine is an effective additive for the GPC mobile phase.

Some advantages of high temperature for the separation of pharmaceutical compounds with mass spectrometry detection

The beneficial effects of high temperature on separation and detection of basic compounds, the detection being performed by MS via ESI, are investigated. The influence of various parameters on both separation and detection performances is studied. These parameters include the mobile phase pH, the temperature, and the type of stationary phase. Experiments are performed under gradient elution conditions. The results obtained with four different supports, silica-, zirconia-, carbon-, and polymer-based columns, are compared by means of different criteria including the elution composition, the peak asymmetry, and the S/N. High temperature liquid chromatography at high pH with volatile buffers suitable for MS detection was shown to be an interesting choice for solutes with basic sites.

Orthogonality and similarity within silica-based reversed-phased chromatographic systems

The starting point of this study was a current set of 32 chromatographic systems used to select initial conditions for method development to determine the impurity profile of a drug. The system exhibiting the best selectivity is then selected for further method development. In this current set eight silica-based phases are applied in conjunction with four mobile phases at different pH. In order to save time and resources, the possibilities for a meaningful subset selection were investigated. The most differing systems in terms of selectivity, in other words only the most orthogonal systems, need to be selected. Since the stationary phases are all silica-based, the selectivity differences are examined within a more homogeneous group than if, for instance, also zirconia- or polymer-based columns would be involved. To select the subset of systems also the best overall separation performances are taken into account. The selection is based both on the HPLC–DAD data of a generic set of 68 drugs, and on the LC–MS–DAD results for a mixture of 15 drugs, less different in structure. The orthogonality is evaluated using weighted-average-linkage dendrograms and color maps, both created from the Pearson-correlation coefficients r between normalized retention times τ. The Derringer's desirability functions are applied to define the systems with the best overall separation performances. Proposals for different representative subsets of the initial 32 systems are made.

Hydrophilic interaction liquid chromatography–APCI–mass spectrometry determination of 5-fluorouracil in plasma and tissues

A simple and fast analytical method using hydrophilic interaction liquid chromatography (HILIC) coupled with mass spectrometry was developed to analyse 5-fluorouracil (5-FU) in plasma and tissues. The HILIC system overcomes problems reported in obtaining satisfactory retention of 5-FU with other types of HPLC systems. After addition of internal standard (IS) (5-Chlorouracil (5-CU)), plasma proteins were precipitated with acetonitrile, and tissue samples homogenised with a micro-dismembrator. The analysis was performed using a polymer-based column (Ashaipak NH 2) and the compounds were eluted under gradient conditions at 1 ml/min using a mobile phase containing a mixture of ammonium formate and acetonitrile. MS detection used a API 4000 mass spectrometry with heated nebulizer source and multiple reaction monitoring operated in the negative ion mode. The mass transitions of 5-FU and its internal standard were 129 m/ z → 42 m/ z and 145 m/ z → 42 m/ z, respectively. The lower limits of quantitation in plasma and tissues were about 5 ng/ml and 10 ng/g, respectively, using 25 μl of plasma and 50 mg of tissue. Good linearity, accuracy and precision were obtained in all matrices tested. The suitability and robustness of the method for in vivo samples were confirmed by analysis of mouse plasma, muscle and tumour from animals dosed with 5-FU.