Polyhydroxyalkanoate Depolymerase Research Articles

Microbial decomposition of biodegradable plastics on the deep-sea floor

Microbes can decompose biodegradable plastics on land, rivers and seashore. However, it is unclear whether deep-sea microbes can degrade biodegradable plastics in the extreme environmental conditions of the seafloor. Here, we report microbial decomposition of representative biodegradable plastics (polyhydroxyalkanoates, biodegradable polyesters, and polysaccharide esters) at diverse deep-sea floor locations ranging in depth from 757 to 5552 m. The degradation of samples was evaluated in terms of weight loss, reduction in material thickness, and surface morphological changes. Poly(l-lactic acid) did not degrade at either shore or deep-sea sites, while other biodegradable polyesters, polyhydroxyalkanoates, and polysaccharide esters were degraded. The rate of degradation slowed with water depth. We analysed the plastic-associated microbial communities by 16S rRNA gene amplicon sequencing and metagenomics. Several dominant microorganisms carried genes potentially encoding plastic-degrading enzymes such as polyhydroxyalkanoate depolymerases and cutinases/polyesterases. Analysis of available metagenomic datasets indicated that these microorganisms are present in other deep-sea locations. Our results confirm that biodegradable plastics can be degraded by the action of microorganisms on the deep-sea floor, although with much less efficiency than in coastal settings.

The importance of microbes in plastics degradation: A sustainable approach A Short Review

Since the 1950s, plastics have been frequently utilized due to their affordability and durability. The widespread use of plastics poses a great risk to the environment. As plastics are non-degradable and have resistance to moisture, they get piled up in the environment, causing soil and water pollution. Global food chains are suffering due to the heavy use of plastic. Bioremediation is a technique that employs the use of living organisms, like microbes and bacteria, in the removal of contaminants, pollutants, and toxins from soil, water, and other environments. Using microorganisms to break down plastic and turns it into low molecular weight molecules, that are safe for the ecosystem is the most cost-effective and environmentally beneficial way to reduce the amount of plastic in the environment. Microorganisms degrade plastics by secreting metabolites such as polyhydroxyalkanoate depolymerases, which help in plastic breakdown. This review outlines the potential of different bacteria and fungi that can breakdown plastics and explains the general procedure of microbial biodegradation of plastics and also the different types of enzymes used by the microorganisms to degrade plastics.

Enzyme selection, optimization, and production toward biodegradation of post-consumer poly(ethylene terephthalate) at scale.

Poly(ethylene terephthalate) (PET) is one of the world's most widely used polyester plastics. Due to its chemical stability, PET is extremely difficult to hydrolyze in a natural environment. Recent discoveries in new polyester hydrolases and breakthroughs in enzyme engineering strategies have inspired enormous research on biorecycling of PET. This study summarizes our research efforts toward large-scale, efficient, and economical biodegradation of post-consumer waste PET, including PET hydrolase selection and optimization, high-yield enzyme production, and high-capacity enzymatic degradation of post-consumer waste PET. First, genes encoding PETase and MHETase from Ideonella sakaiensisand the ICCG variant of leaf-branch compost cutinase (LCCICCG ) were codon-optimized and expressed in Escherichia coliBL21(DE3) for high-yield production. To further lower the enzyme production cost, a pelB leader sequence was fused to LCCICCG so that the enzyme can be secreted into the medium to facilitate recovery. To help bind the enzyme on the hydrophobic surface of PET, a substrate-binding module in a polyhydroxyalkanoate depolymerase from Alcaligenes faecalis (PBM) was fused to the C-terminus of LCCICCG . The resulting four different LCCICCG variants (LCC, PelB-LCC, LCC-PBM, and PelB-LCC-PBM), together with PETase and MHETase, were compared for PET degradation efficiency. A fed-batch fermentation process was developed to produce the target enzymes up to 1.2g/L. Finally, the best enzyme, PelB-LCC, was selected and used for the efficient degradation of 200g/L recycled PET in a well-controlled, stirred-tank reactor. The results will help develop an economical and scalable biorecycling process toward a circular PET economy. This article is protected by copyright. All rights reserved.

Expression, thermal stability modification and application in PHB degradation of polyhydroxyalkanoate depolymerase from Thermomonospora umbrina

Polyhydroxyalkanoate depolymerase (PHAD) can be used for the degradation and recovery of polyhydroxyalkanoate (PHA). In order to develop a PHAD with good stability under high temperature, PHAD from Thermomonospora umbrina (TumPHAD) was heterelogously expressed in Escherichia coli BL21(DE3). At the same time, a mutant A190C/V240C with enhanced stability was obtained via rational design of disulfide bonds. Characterization of enzymatic properties showed that the mutant A190C/V240C had an optimum temperature of 60 ℃, which was 20 ℃ higher than that of the wild type. The half-life at 50 ℃ was 7 hours, at 50 ℃ which was 21 times longer than that of the wild type. The mutant A190C/V240C was used for the degradation of polyhydroxybutyrate (PHB), one of the typical PHA. At 50 ℃, the degradation rate of PHB being treated for 2 hours and 12 hours was 2.1 times and 3.8 times higher than that of the wild type, respectively. The TumPHAD mutant A190C/V240C obtained in this study shows tolerance to high temperature resistance, good thermal stability and strong PHB degradation ability, which may facilitate the degradation and recovery of PHB.

Production of Polyhydroxybutyrate by Genetically Modified Pseudomonas sp. phDV1: A Comparative Study of Utilizing Wine Industry Waste as a Carbon Source.

Pseudomonas sp. phDV1 is a polyhydroxyalkanoate (PHA) producer. The presence of the endogenous PHA depolymerase (phaZ) responsible for the degradation of the intracellular PHA is one of the main shortages in the bacterial production of PHA. Further, the production of PHA can be affected by the regulatory protein phaR, which is important in accumulating different PHA-associated proteins. PHA depolymerase phaZ and phaR knockout mutants of Pseudomonas sp. phDV1 were successfully constructed. We investigate the PHA production from 4.25 mM phenol and grape pomace of the mutants and the wild type. The production was screened by fluorescence microscopy, and the PHA production was quantified by HPLC chromatography. The PHA is composed of Polydroxybutyrate (PHB), as confirmed by 1H-nuclear magnetic resonance analysis. The wildtype strain produces approximately 280 μg PHB after 48 h in grape pomace, while the phaZ knockout mutant produces 310 μg PHB after 72 h in the presence of phenol per gram of cells, respectively. The ability of the phaZ mutant to synthesize high levels of PHB in the presence of monocyclic aromatic compounds may open the possibility of reducing the costs of industrial PHB production.

Surface oxidation of polyhydroxyalkanoate films with different molecular structure via photo-activated chlorine dioxide radical and comparison of the influence on the properties

Polyhydroxyalkanoates (PHAs) are novel candidates for biodegradable plastics, and hydrophobic surfaces have been modified to improve their dyeability and adhesion to other materials. In this study, surface oxidation by photoactivated chlorine dioxide radicals was carried out on four types of PHA films with different molecular structures to investigate whether the number of introduced functional groups changes. Whether the mechanical properties, crystallinity, enzymatic degradability, and biodegradability in seawater were changed by oxidation was also investigated. It was found that the number of functional groups decreased in the polymer having monomer units without side chains, indicating that the reactivity of the oxidation is affected by the presence of the side chain. No significant changes in mechanical properties and crystallinity were observed. The enzymatic degradability of some of the oxidized PHA films was significantly reduced because it did not match the substrate specificity of the catalytic domain of a PHA depolymerase due to changes in the molecular structure caused by oxidation. In a biodegradation test using seawater, the initial biodegradation rate of the oxidized films was slightly reduced, suggesting that the oxidation may affect the biodegradation of microorganisms in the environment.

Polymer-Degrading Enzymes of Pseudomonas chloroaphis PA23 Display Broad Substrate Preferences.

Although many bacterial lipases and PHA depolymerases have been identified, cloned, and characterized, there is very little information on the potential application of lipases and PHA depolymerases, especially intracellular enzymes, for the degradation of polyester polymers/plastics. We identified genes encoding an intracellular lipase (LIP3), an extracellular lipase (LIP4), and an intracellular PHA depolymerase (PhaZ) in the genome of the bacterium Pseudomonas chlororaphis PA23. We cloned these genes into Escherichia coli and then expressed, purified, and characterized the biochemistry and substrate preferences of the enzymes they encode. Our data suggest that the LIP3, LIP4, and PhaZ enzymes differ significantly in their biochemical and biophysical properties, structural-folding characteristics, and the absence or presence of a lid domain. Despite their different properties, the enzymes exhibited broad substrate specificity and were able to hydrolyze both short- and medium-chain length polyhydroxyalkanoates (PHAs), para-nitrophenyl (pNP) alkanoates, and polylactic acid (PLA). Gel Permeation Chromatography (GPC) analyses of the polymers treated with LIP3, LIP4, and PhaZ revealed significant degradation of both the biodegradable as well as the synthetic polymers poly(ε-caprolactone) (PCL) and polyethylene succinate (PES).

Strain-specific predation of Bdellovibrio bacteriovorus on Pseudomonas aeruginosa with a higher range for cystic fibrosis than for bacteremia isolates

This work aimed to evaluate the predatory activity of Bdellovibrio bacteriovorus 109J on clinical isolates of Pseudomonas aeruginosa selected from well-characterized collections of cystic fibrosis (CF) lung colonization (n = 30) and bloodstream infections (BSI) (n = 48) including strains selected by genetic lineage (frequent and rare sequence types), antibiotic resistance phenotype (susceptible and multidrug-resistant isolates), and colony phenotype (mucoid and non-mucoid isolates). The intraspecies predation range (I-PR) was defined as the proportion of susceptible strains within the entire collection. In contrast, the predation efficiency (PE) is the ratio of viable prey cells remaining after predation compared to the initial inoculum. I-PR was significantly higher for CF (67%) than for BSI P. aeruginosa isolates (35%) probably related to an environmental origin of CF strains whereas invasive strains are more adapted to humans. I-PR correlation with bacterial features such as mucoid morphotype, genetic background, or antibiotic susceptibility profile was not detected. To test the possibility of increasing I-PR of BSI isolates, a polyhydroxyalkanoate depolymerase deficient B. bacteriovorus bd2637 mutant was used. Global median I-PR and PE values remained constant for both predators, but 31.2% of 109J-resistant isolates were susceptible to the mutant, and 22.9% of 109J-susceptible isolates showed resistance to predation by the mutant, pointing to a predator–prey specificity process. The potential use of predators in the clinical setting should be based on the determination of the I-PR for each species, and the PE of each particular target strain.

Characterization of Streptomyces nymphaeiformis sp. nov., and its taxonomic relatedness to other polyhydroxybutyrate-degrading streptomycetes.

A polyhydroxybutyrate (PHB)-degrading actinomycete, strain SFB5AT, was identified as a species of Streptomyces based on its membrane fatty acid profile and the presence of ll-diaminopimelic acid in the cell wall. It formed sporulating mycelia on most agar media, but flat or wrinkled, moist colonies on trypticase soy agar. Spores were smooth, cylindrical, and borne on long, straight to flexuous chains. It produced a light brown diffusible pigment, but not melanin. Comparison of genomic digital DNA-DNA hybridization (dDDH) and average nucleotide identity (ANI) values indicated that strain SFB5AT was related to Streptomyces litmocidini JCM 4394T, Streptomyces vietnamensis GIMV4.0001T, Streptomyces nashvillensis JCM 4498T and Streptomyces tanashiensis JCM 4086T, plus 11 other species. However, the dDDH and ANI values were well below the species differentiation thresholds of <70 and <95 %, respectively; also, multilocus sequence analysis distances exceeded the species threshold of 0.007. Moreover, strain SFB5AT differed from the other species in pigmentation and its ability to catabolize arabinose. Strain SFB5AT and 11 of its 15 closest relatives degraded PHB and have genes for extracellular, short-chain-length denatured polyhydroxyalkanoate depolymerases. These enzymes from strain SFB5AT and its closest relatives had a type 1 catalytic domain structure, while those from other relatives had a type 2 structure, which differs from type one in the position of a consensus histidine in the active site. Thus, phenotypic and genotypic differences suggest that strain SFB5AT represents a new species of Streptomyces, for which we propose the name Streptomyces nymphaeiformis sp. nov. The type strain is SFB5AT (=NRRL B-65520T=DSM 112030T).

Microbial cell factories for the production of polyhydroxyalkanoates.

Pollution caused by persistent petro-plastics is the most pressing problem currently, with 8 million tons of plastic waste dumped annually in the oceans. Plastic waste management is not systematized in many countries, because it is laborious and expensive with secondary pollution hazards. Bioplastics, synthesized by microorganisms, are viable alternatives to petrochemical-based thermoplastics due to their biodegradable nature. Polyhydroxyalkanoates (PHAs) are a structurally and functionally diverse group of storage polymers synthesized by many microorganisms, including bacteria and Archaea. Some of the most important PHA accumulating bacteria include Cupriavidus necator, Burkholderia sacchari, Pseudomonas sp., Bacillus sp., recombinant Escherichia coli, and certain halophilic extremophiles. PHAs are synthesized by specialized PHA polymerases with assorted monomers derived from the cellular metabolite pool. In the natural cycle of cellular growth, PHAs are depolymerized by the native host for carbon and energy. The presence of these microbial PHA depolymerases in natural niches is responsible for the degradation of bioplastics. Polyhydroxybutyrate (PHB) is the most common PHA with desirable thermoplastic-like properties. PHAs have widespread applications in various industries including biomedicine, fine chemicals production, drug delivery, packaging, and agriculture. This review provides the updated knowledge on the metabolic pathways for PHAs synthesis in bacteria, and the major microbial hosts for PHAs production. Yeasts are presented as a potential candidate for industrial PHAs production, with their high amenability to genetic engineering and the availability of industrial-scale technology. The major bottlenecks in the commercialization of PHAs as an alternative for plastics and future perspectives are also critically discussed.

Complete genome sequence of Photobacterium ganghwense C2.2: A new polyhydroxyalkanoate production candidate.

Polyhydroxyalkanoates (PHAs) are biodegradable bioplastics that can be manufactured sustainably and represent a promising green alternative to petrochemical‐based plastics. Here, we describe the complete genome of a new marine PHA‐producing bacterium—Photobacterium ganghwense (strain C2.2), which we have isolated from the Black Sea seashore. This new isolate is psychrotolerant and accumulates PHA when glycerol is provided as the main carbon source. Transmission electron microscopy, specific staining with Nile Red visualized via epifluorescence microscopy and gas chromatography analysis confirmed the accumulation of PHA. This is the only PHA‐producing Photobacterium for which we now have a complete genome sequence, allowing us to investigate the pathways for PHA production and other secondary metabolite synthesis pathways. The de novo assembly genome, obtained using open‐source tools, comprises two chromosomes (3.5, 2 Mbp) and a megaplasmid (202 kbp). We identify the entire PHA synthesis gene cluster that encodes a class I PHA synthase, a phasin, a 3‐ketothiolase, and an acetoacetyl‐CoA reductase. No conventional PHA depolymerase was identified in strain C2.2, but a putative lipase with extracellular amorphous PHA depolymerase activity was annotated, suggesting that C2.2 is unable to degrade intracellular PHA. A complete pathway for the conversion of glycerol to acetyl‐CoA was annotated, in accordance with its ability to convert glycerol to PHA. Several secondary metabolite biosynthetic gene clusters and a low number of genes involved in antibiotic resistance and virulence were also identified, indicating the strain's suitability for biotechnological applications.

Biosynthesis and Characterization of Medium-Chain-Length Polyhydroxyalkanoate with an Enriched 3-Hydroxydodecanoate Monomer from a Pseudomonas chlororaphis Cell Factory.

Polyhydroxyalkanoates (PHAs) have been reported with agricultural and medical applications in virtue of their biodegradable and biocompatible properties. Here, we systematically engineered three modules for the enhanced biosynthesis of medium-chain-length polyhydroxyalkanoate (mcl-PHA) in Pseudomonas chlororaphis HT66. The phzE, fadA, and fadB genes were deleted to block the native phenazine pathway and weaken the fatty acid β-oxidation pathway. Additionally, a PHA depolymerase gene phaZ was knocked out to prevent the degradation of mcl-PHA. Three genes involved in the mcl-PHA biosynthesis pathway were co-overexpressed to increase carbon flux. The engineered strain HT4Δ::C1C2J exhibited an 18.2 g/L cell dry weight with 84.9 wt % of mcl-PHA in a shake-flask culture, and the 3-hydroxydodecanoate (3HDD) monomer was increased to 71.6 mol %. Thermophysical and mechanical properties of mcl-PHA were improved with an enriched ratio of 3HDD. This study demonstrated a rational metabolic engineering approach to enhance the production of mcl-PHA with the enriched dominant monomer and improved material properties.

The phylogenetic and global distribution of bacterial polyhydroxyalkanoate bioplastic-degrading genes.

Polyhydroxyalkanoates (PHAs) are a family of microbially made polyesters commercialized as biodegradable plastics. PHA production rates are predicted to increase as concerns around environmental plastic contamination and limited fossil fuel resources have increased the importance of biodegradable and bio-based plastic alternatives. Microbially produced PHA depolymerases are the key enzymes mediating PHA biodegradation, but only a few PHA depolymerases have been well-characterized and screens employing metagenomic sequence data are lacking. Here, we used 3078 metagenomes to analyse the distribution of PHA depolymerases in microbial communities from diverse aquatic, terrestrial and waste management systems. We significantly expand the recognized diversity of this protein family by screening 1914 Gb of sequence data and identifying 13 869 putative PHA depolymerases in 1295 metagenomes. Our results indicate that PHA depolymerases are unevenly distributed across environments. We predicted the highest frequency of PHA depolymerases in wastewater systems and the lowest in marine and thermal springs. In tandem, we screened 5290 metagenome-assembled genomes to describe the phylogenetic distribution of PHA depolymerases, which is substantially broader compared with current cultured representatives. The Proteobacteria and Bacteroidota are key lineages encoding PHA depolymerases, but PHA depolymerases were predicted from members of the Bdellovibrionota, Methylomirabilota, Actinobacteriota, Firmicutes, Spirochaetota, Desulfobacterota, Myxococcota and Planctomycetota.

Comparative Genomics of Marine Bacteria from a Historically Defined Plastic Biodegradation Consortium with the Capacity to Biodegrade Polyhydroxyalkanoates.

Biodegradable and compostable plastics are getting more attention as the environmental impacts of fossil-fuel-based plastics are revealed. Microbes can consume these plastics and biodegrade them within weeks to months under the proper conditions. The biobased polyhydroxyalkanoate (PHA) polymer family is an attractive alternative due to its physicochemical properties and biodegradability in soil, aquatic, and composting environments. Standard test methods are available for biodegradation that employ either natural inocula or defined communities, the latter being preferred for standardization and comparability. The original marine biodegradation standard test method ASTM D6691 employed such a defined consortium for testing PHA biodegradation. However, the taxonomic composition and metabolic potential of this consortium have never been confirmed using DNA sequencing technologies. To this end, we revived available members of this consortium and determined their phylogenetic placement, genomic sequence content, and metabolic potential. The revived members belonged to the Bacillaceae, Rhodobacteraceae, and Vibrionaceae families. Using a comparative genomics approach, we found all the necessary enzymes for both PHA production and utilization in most of the members. In a clearing-zone assay, three isolates also showed extracellular depolymerase activity. However, we did not find classical PHA depolymerases, but identified two potentially new extracellular depolymerases that resemble triacylglycerol lipases.

Identification and characterization of a novel extracellular polyhydroxyalkanoate depolymerase in the complete genome sequence of Undibacterium sp. KW1 and YM2 strains.

Polyhydroxyalkanoate (PHA) is a biodegradable polymer that is synthesized by a wide range of microorganisms. One of the derivatives of PHA, poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBH) has flexible material properties and low melting temperature. We have previously demonstrated that PHBH is degradable in a freshwater environment via the formation of biofilm on the surface of the PHBH film. Undibacterium sp. KW1 and YM2, which were isolated from the biofilm present on the PHBH film in the freshwater sample, were shown to have PHBH-degrading activity. In this study, the complete genome sequence of KW1 and YM2 revealed that the extracellular PHA depolymerase gene, designated as phaZUD, was present in their chromosomes. Sequence analysis revealed that PhaZUD contained four domains: a signal peptide, catalytic domain, linker domain, and substrate-binding domain. Escherichia coli harboring a PhaZUD-expressing plasmid showed PHBH-degrading activity in LB medium containing 1 wt% PHBH powder. The recombinant His-tagged PhaZUD from KW1 and YM2 was purified from the culture supernatant and shown to have PHBH-degrading activity at the optimum temperature of 35 and 40°C, respectively. When the degradation product in the PHBH solution was treated with PhaZUD and assayed by LC-TOF-MS, we detected various oligomer structures, but no more than pentamers, which consist of 3-hydroxybutyrate and 3-hydroxyhexanoate. These results demonstrated that PhaZUD may have an endo-type extracellular PHA depolymerase activity.

Asymmetric Open-Closed Dimer Mechanism of Polyhydroxyalkanoate Synthase PhaC.

SummaryBiodegradable polyester polyhydroxyalkanoate (PHA) is a promising bioplastic material for industrial use as a replacement for petroleum-based plastics. PHA synthase PhaC forms an active dimer to polymerize acyl moieties from the substrate acyl-coenzyme A (CoA) into PHA polymers. Here we present the crystal structure of the catalytic domain of PhaC from Chromobacterium sp. USM2, bound to CoA. The structure reveals an asymmetric dimer, in which one protomer adopts an open conformation bound to CoA, whereas the other adopts a closed conformation in a CoA-free form. The open conformation is stabilized by the asymmetric dimerization and enables PhaC to accommodate CoA and also to create the product egress path. The bound CoA molecule has its β-mercaptoethanolamine moiety extended into the active site with the terminal SH group close to active center Cys291, enabling formation of the reaction intermediate by acylation of Cys291.

Screening of endogenous strong promoters for enhanced production of medium-chain-length polyhydroxyalkanoates in Pseudomonas mendocina NK-01

Polyhydroxyalkanoate (PHA) can be produced by microorganisms from renewable resources and is regarded as a promising bioplastic to replace petroleum-based plastics. Pseudomonas mendocina NK-01 is a medium-chain-length PHA (mcl-PHA)-producing strain and its whole-genome sequence is currently available. The yield of mcl-PHA in P. mendocina NK-01 is expected to be improved by applying a promoter engineering strategy. However, a limited number of well-characterized promoters has greatly restricted the application of promoter engineering for increasing the yield of mcl-PHA in P. mendocina NK-01. In this work, 10 endogenous promoters from P. mendocina NK-01 were identified based on RNA-seq and promoter prediction results. Subsequently, 10 putative promoters were characterized for their strength through the expression of a reporter gene gfp. As a result, five strong promoters designated as P4, P6, P9, P16 and P25 were identified based on transcriptional level and GFP fluorescence intensity measurements. To evaluate whether the screened promoters can be used to enhance transcription of PHA synthase gene (phaC), the three promoters P4, P6 and P16 were separately integrated into upstream of the phaC operon in the genome of P. mendocina NK-01, resulting in the recombinant strains NKU-4C1, NKU-6C1 and NKU-16C1. As expected, the transcriptional levels of phaC1 and phaC2 in the recombinant strains were increased as shown by real-time quantitative RT-PCR. The phaZ gene encoding PHA depolymerase was further deleted to construct the recombinant strains NKU-∆phaZ-4C1, NKU-∆phaZ-6C1 and NKU-∆phaZ-16C1. The results from shake-flask fermentation indicated that the mcl-PHA titer of recombinant strain NKU-∆phaZ-16C1 was increased from 17 to 23 wt% compared with strain NKU-∆phaZ. This work provides a feasible method to discover strong promoters in P. mendocina NK-01 and highlights the potential of the screened endogenous strong promoters for metabolic engineering of P. mendocina NK-01 to increase the yield of mcl-PHA.

Polyhydroxybutyrate (PHB) biodegradation using bacterial strains with demonstrated and predicted PHB depolymerase activity

The biodegradation of polyhydroxybutyrate (PHB) has been broadly investigated, but studies typically focus on a single strain or enzyme and little attention has been paid to comparing the interaction of different PHB depolymerase (PhaZ)-producing strains with this biopolymer. In this work, we selected nine bacterial strains-five with demonstrated and four with predicted PhaZ activity-to compare their effectiveness at degrading PHB film provided as sole carbon source. Each of the strains with demonstrated activity were able to use the PHB film (maximum mass losses ranging from 12% after 2days for Paucimonas lemoignei to 90% after 4days for Cupriavidus sp.), and to a lower extent Marinobacter algicola DG893 (with a predicted PhaZ) achieved PHB film mass loss of 11% after 2weeks of exposure. Among the strains with proven PhaZ activity, Ralstonia sp. showed the highest specific activity since less biomass was required to degrade the polymer in comparison to the other strains. In the case of Ralstonia sp., PHB continued to be degraded at pH values as low as pH3.3-3.7. In addition, analysis of the extracellular fractions of the strains with demonstrated activity showed that Comamonas testosteroni, Cupriavidus sp., and Ralstonia sp. readily degraded both PHB film and PHB particles in agar suspensions. This study highlights that whole cell cultures and enzymatic (extracellular) fractions display different levels of activity, an important factor in the development of PHB-based applications and in understanding the fate of PHB and other PHAs released in the environment. Furthermore, predictions of PhaZ functionality from genome sequencing analyses remain to be validated by experimental results; PHB-degrading ability could not be proven for three of four investigated species predicted by the polyhydroxyalkanoates (PHA) depolymerase engineering database.

Biocatalytic potential of Streptomyces spp. isolates from rhizosphere of plants and mycorrhizosphere of fungi.

Biocatalytic potential of Streptomyces strains isolated from the rhizosphere of plants and from mycorrhizosphere of fungi has been investigated. A total of 118 Streptomyces isolates were selected and functionally screened for 10 different biotechnologically important enzymatic activities: hydrolase (cellulase, cutinase, gelatinase, lipase, protease, polyhydroxyalkanoate (PHA) depolymerase), phenol oxidase and peroxidase (laccase, tyrosinase, and lignin peroxidase), and aminotransferase. Out of 118 tested Streptomyces spp., 90% showed at least one enzymatic activity. The most abundant were enzymes involved in the biomass degradation, as the production of cutinase, cellulase, and lignin peroxidase were detected in 31%, 40%, and 48% of the isolates, respectively. The improved specific activities of lipase (isolates BV315 and BV100) and tyrosinase (isolates BV87 and BV88) were shown in comparison with the industrially relevant activities of Pseudomonas strains. Plant rhizosphere soils were more prolific source of Streptomyces strains with biocatalytic potential in comparison with mycorrhizosphere soils. Overall, 284 enzyme activities among 118 Streptomyces isolates have been detected. This is the first comprehensive screening of Streptomyces isolates from rhizosphere and mycorrhizosphere soils for novel biocatalysts, showing that specific environmental habitats, such as rhizosphere soils, are "treasure troves" of Streptomyces with biocatalytic potential.

Characterization of an Extracellular Polyhydroxyalkanoate Depolymerase from Streptomyces sp. SFB5A

Characterization of an Extracellular Polyhydroxyalkanoate Depolymerase from Streptomyces sp. SFB5A