Polyethylene Oxide Nanofibers Research Articles

Evaluation of the wound healing efficacy of new antibacterial polymeric nanofiber based on polyethylene oxide coated with copper nanoparticles and defensin peptide: An in-vitro to in-vivo assessment

ObjectiveToday, designing nanofibers with antibacterial properties using electrospinning technology is one of the attractive approaches for wound healing. Methods& analysis: This study aims to fabricate a nanocomposite from polyethylene oxide (PEO) coated with copper nanoparticles (NPs) and defensin peptide with wound healing and antimicrobial properties in different ratios of CuNPs/defensin (2/0 mg), (1.5/0.5 mg), and (1/1 mg) in the fixed contain polymer (98 mg). Then, the nanofiber properties were investigated by SEM, tensile, DSC, and BET analysis. Also, the antibacterial properties against S. aureus and E. coli, antioxidant, and in-vivo wound healing effects and histological analysis of the designed nanocomposites were evaluated in rat models. ResultsOur SEM images showed that CuNPs and defensin were properly coated on the PEO surface. According to the tensile, DSC, and antibacterial analysis results, the most appropriate feature was related to CuNPs/defensin (1.5/0.5 mg), with maximum elasticity, heat resistance, and antibacterial activity. Furthermore, the designed nanocomposites showed the best performance as a wound closure agent by increasing dermis and epidermis volume density, stimulating fibroblast cells and collagen fiber production, and improving skin vessels. ConclusionAccording to our results, PEO nanofibers loaded with CuNPs and defensin have the best potential for wound healing, and they can be used as antibacterial materials in the textile, drug, and medical industries.

A Simple Cost-Effective Method to Fabricate Single Nanochannels by Embedding Electrospun Polyethylene Oxide Nanofibers.

Solid state nanochannels provide significant practical advantages in many fields due to their interesting properties, such as controllable shape and size, robustness, ion selectivity. But their complex preparation processes severely limit their application. In this study, a simple cost-effective method to fabricate single nanochannel by embedding a single polyethylene oxide (PEO) nanofiber is presented. Firstly, PEO nanofibers are prepared by electrospinning, and then a single PEO nanofiber are precisely transferred to the target sample using a micromanipulation platform. Then, PDMS is used for embedding, and finally, the PEO nanofiber is dissolved to obtain a single nanochannel. Unlike other methods of preparing nanochannels by embedding nanofibers, this method can prepare single nanochannel. The diameter of nanochannel can be as fine as 100 nm, and the length can reach several micrometers. The power generation between two potassium chloride solutions with various combinations of concentrations was investigated using the nanochannel. This low-cost flexible nanochannel can also be used in various applications, including DNA sequencing and biomimetic ion channel.

Electrospun Nanofiber Mats with Embedded Zinc Oxysulfide for Photoreduction of Nitrobenzene to Aniline under Mild Condition.

In this work, electrospun nanofiber embedded with zinc oxysulfide (Zn(O,S)) has been demonstrated as an efficient and robust photocatalyst for hydrogenation of nitrobenzene to aniline under solar light irradiation at mild conditions with methanol as the hole scavenger. The solid solution state of Zn(O,S) in electrospun nanofiber was successfully revealed by high-resolution transmission electron microscopy and X-ray diffraction analyses in which the lattice fringes and diffraction planes located in between those of ZnO and ZnS phases. Moreover, the electrochemical and optical properties of Zn(O,S) embedded in polyethylene oxide (PEO) nanofiber are found to be better than those of ZnO and ZnS indicating more efficient photocatalytic activities as well. The photocatalytic hydrogenation of nitrobenzene to aniline occurred completely within 2 h of the photocatalytic reaction with a reusability of 95% after five consecutive runs. Finally, the mechanism of photocatalytic hydrogenation by Zn(O,S) embedded in the PEO (PZOS) nanofiber involves a total of six electrons (e-) and six protons (H+) to hydrogenate nitrobenzene to nitrosobenzene, phenylhydroxylamine, and aniline.

A Neural Network Approach to Reducing the Costs of Parameter-Setting in the Production of Polyethylene Oxide Nanofibers.

Nanofibers, which are formed by the electrospinning process, are used in a variety of applications. For this purpose, a specific diameter suited for each application is required, which is achieved by varying a set of parameters. This parameter adjustment process is empirical and works by trial and error, causing high input costs and wasting time and financial resources. In this work, an artificial neural network model is presented to predict the diameter of polyethylene nanofibers, based on the adjustment of 15 parameters. The model was trained from 105 records from data obtained from the literature and was then validated with nine nanofibers that were obtained and measured in the laboratory. The average error between the actual results was 2.29%. This result differs from those taken in an evaluation of the dataset. Therefore, the importance of increasing the dataset and the validation using independent data is highlighted.

One-pot microwave synthesis of chitosan-stabilized silver nanoparticles entrapped polyethylene oxide nanofibers, with their intrinsic antibacterial and antioxidant potency for wound healing

Different physical and chemical techniques could be used to prepare chitosan/Silver nanoparticle (CHS/AgNPs) nanocomposite. The microwave heating reactor was rationally adopted as a benign tool for preparing CHS/AgNPs owing to less energy consumption and shorter time required for completing the nucleation and growth particles. UV–Vis, FTIR, and XRD, provided conclusive evidence of the AgNPs creation, while TEM micrographs elucidated that the size was spherical (20 nm). CHS/AgNPs were embedded in polyethylene oxide (PEO) nanofiber via electrospinning, and their biological properties, cytotoxicity evaluation, antioxidant, and antibacterial activity assays were investigated. The generated nanofibers have mean diameters of 130.9 ± 9.5, 168.7 ± 18.8, and 186.8 ± 8.19 nm for PEO, PEO/ CHS, and PEO/ CHS (AgNPs), respectively. Because of the tiny AgNPs particle size loaded in PEO/CHS (AgNPs) fabricated nanofiber, good antibacterial activity with ZOI against E. coli was 51.2 ± 3.2, and S. aureus was 47.2 ± 2.1 for PEO/ CHS (AgNPs) nanofibers. Non-toxicity was observed against Human Skin Fibroblast and Keratinocytes cell lines (>93.5 %), which justifies its great antibacterial potential to remove or prevent infection in wounds with fewer adverse effects.

Ginger Loaded Polyethylene Oxide Electrospun Nanomembrane: Rheological and Antimicrobial Attributes.

Synthetic antibiotics have captured the market in recent years, but the side effects of these products are life-threatening. In recent times, researchers have focused their research on natural-based products such as natural herbal oils, which are eco-friendly, biocompatible, biodegradable, and antibacterial. In this study, polyethylene oxide (PEO) and aqueous ginger extract (GE) were electrospun to produce novel antibacterial nanomembrane sheets as a function of PEO and GE concentrations. A GE average particle size of 91.16 nm was achieved with an extensive filtration process, inferring their incorporation in the PEO nanofibres. The presence of the GE was confirmed by Fourier transform infrared spectroscopy (FTIR) through peaks of phenol and aromatic groups. The viscoelastic properties of PEO/GE solutions were analysed in terms of PEO and GE concentrations. Increasing PEO and GE concentrations increased the solution's viscosity. The dynamic viscosity of 3% was not changed with increasing shear rate, indicating Newtonian fluid behaviour. The dynamic viscosity of 4 and 5 wt% PEO/GE solutions containing 10% GE increased exponentially compared to 3 wt%. In addition, the shear thinning behaviour was observed over a frequency range of 0.05 to 100 rad/s. Scanning Electron Microscopy (SEM) analysis also specified an increase in the nanofibre's diameter with increasing PEO concentration, while SEM images displayed smooth morphology with beadless nanofibres at different PEO/GE concentrations. In addition, PEO/GE nanomembranes inhibited the growth of Staphylococcus aureus, as presented by qualitative antibacterial results. The extent of PEO/GE nanomembrane's antibacterial activity was further investigated by the agar dilution method, which inhibited the 98.79% Staphylococcus aureus population at 30% GE concentration.

Development and characterization of lanolin incorporated electrospun nanofibers for nursing pads

In this study, to combine the biological properties of lanolin and the advantages of electrospun nanofiber mats for developing a potent topical wound dressing/nursing pads that includes lanolin, lanolin incorporated electrospun cellulose acetate (CA), polyethylene oxide (PEO), polyethylene oxide/chitosan (PEO/chitosan) and thermoplastic polyurethane (TPU) nanofibers were developed and characterized. Surface tension, viscosity and conductivity measurements of each polymer solution were carried out in order to characterize the spinning solutions. Lanolin addition did not affect the conductivity values but increase the viscosity of each spinning solution. According to the SEM images, smooth nanofiber surfaces were produced which could be appropriate for a top layer of a nursing pad. Slightly attached, thicker nanofibers could be seen from the TPU/Lanolin images. Similar to TPU nanofibers, CA nanofibers were smoother and thinner than CA/Lanolin nanofibers. Lanolin effected the uniformity of the PEO nanofibers, but it could be said that homogeneous distribution of lanolin was achieved. Characterization of these nanofiber membranes were also carried out with FTIR, DSC, swelling and weight loss analysis. Since TPU nanofibers were hydrophobic and the addition of lanolin made the nanofiber more hydrophobic, they did not show high swelling ratios. CA nanofibers swelled 610% due to their relatively hydrophilic nature and bulky structure. PEO nanofibers were totally dissolved in the water, a very thin layer remained for PEO-Chitosan/lanolin nanofibers. So, using electrospun CA and TPU nanofiber membranes for a nursing pad upper layer could be suitable. CA/lanolin nanofibers showed better hydrophilicity and swelling when compared to TPU nanofibers. On the other hand, TPU nanofibers are more elastic and durable with lower swelling.

Electrospun α-mangosteen–chitosan–poly(ethylene oxide) nanofibers

In this study, electrospun α-mangosteen–chitosan–polyethylene oxide (PEO) nanofibers were produced via electrospinning process. The structure and morphology of nanofibers were evaluated through a field emission scanning electron microscope (FESEM) and Fourier-transform infrared (FTIR) spectroscopy. The FE-SEM demonstrated that the average diameter of electrospun α-mangosteen–chitosan–PEO nanofibers were 125.5 ± 33.6 nm, 91.8 ± 27.1 nm, and 111.7 ± 39.8 nm for 0.025, 0.05, and 0.075% (w/v) α-mangosteen concentration, respectively, meanwhile the average diameter of electrospun chitosan–PEO nanofibers and electrospun α-mangosteen–PEO nanofibers was 124.8 ± 52.8 nm and 153.5 ± 49 nm, respectively. The FE-SEM image of electrospun α-mangosteen–chitosan–PEO nanofibers shows that the higher concentration of PEO resulted in smooth morphology, no beads, and continuous fibers. The morphology of electrospun α-mangosteen–chitosan–PEO nanofibers resulted in a better preservative than the morphology of electrospun α-mangosteen–PEO nanofibers. The FTIR spectra of the electrospun nanofibers demonstrate the presence of characteristic peaks of α-mangosteen, chitosan, and PEO and indicate intermolecular interactions via hydrogen bonds. The average diameter of the electrospun α-mangosteen–chitosan–PEO nanofibers are within the size range of the extracellular matrix of the natural structure. Therefore, the electrospun α-mangosteen–chitosan–PEO nanofibers are the potential for biomedical applications.

Influence of rotor structure and process parameters on polyethylene oxide (PEO) nanofibers produced through centrifugal

The application of new tools and equipment in conventional spinning has increased with the advancements in operations, handling and optimal yarn production. For example, in the centrifugal electrospinning process (CESP), the rotor is assembled for its high-speed production. Therefore, the purpose of this study is to introduce a new rotor design with a triangular groove structure and to investigate its influence on the fast industrial manufacturing of polyethylene oxide (PEO) nanofibers. In addition, electric voltage (45 kV, 55 kV, 65 kV), concentrations of the spinning solution of PEO polymer (6 wt. %, 7 wt. % and 8 wt. %) and the flow rate of the spinning solution were analysed at different levels (45 ml/h, 55 ml/h, 65 ml/h). The subsequent PEO nanofibers were characterized through a scanning electron microscope (FESEM). It was observed that the diameter of PEO nanofibers changed with the variation in voltage, concentration and flow rate. The results revealed the best and uniform fibre diameter dimension at 65 kV, with an 8 wt.% solution concentration and flow rate of 55 ml/h. The outcomes also implied that the proposed triangular groove rotor was an efficient approach for the improvement in the nano fibres with its high uniformity as compared to the conventional structure (rectangular rotor structure).

Ultrahigh‐Output Triboelectric and Electromagnetic Hybrid Generator for Self‐Powered Smart Electronics and Biomedical Applications (Adv. Energy Mater. 40/2022)

Hybrid Nanogenerators In article number 2202238, Jae Yeong Park and co-workers successfully developed ultra-high output hybridized nanogenerators based on triboelectric and electromagnetic generators to scavenge biomechanical energy and provide a self-powered system. Halbach magnet arrays improve electromagnetic generator performance by concentrating magnetic flux in the coil, while polyethylene oxide nanofibers improve triboelectric performance. The fabricated device demonstrates biomechanical energy harvesting and provides a fast-charging power source for portable electronics.

New Application Field of Polyethylene Oxide: PEO Nanofibers as Epoxy Toughener for Effective CFRP Delamination Resistance Improvement.

Delamination is the most severe weakness affecting all composite materials with a laminar structure. Nanofibrous mat interleaving is a smart way to increase the interlaminar fracture toughness: the use of thermoplastic polymers, such as poly(ε-caprolactone) and polyamides (Nylons), as nonwovens is common and well established. Here, electrospun polyethylene oxide (PEO) nanofibers are proposed as reinforcing layers for hindering delamination in epoxy-based carbon fiber-reinforced polymer (CFRP) laminates. While PEO nanofibers are well known and successfully applied in medicine and healthcare, to date, their use as composite tougheners is undiscovered, resulting in the first investigation in this application field. The PEO-modified CFRP laminate shows a significant improvement in the interlaminar fracture toughness under Mode I loading: +60% and +221% in GI,C and GI,R, respectively. The high matrix toughening is confirmed by the crack path analysis, showing multiple crack planes, and by the delamination surfaces, revealing that extensive phase separation phenomena occur. Under Mode II loading, the GII enhancement is almost 20%. Despite a widespread phase separation occurring upon composite curing, washings in water do not affect the surface delamination morphology, suggesting a sufficient humidity resistance of the PEO-modified laminate. Moreover, it almost maintains both the original stiffness and glass transition temperature (Tg), as assessed via three-point bending and dynamic mechanical analysis tests. The achieved results pave the way for using PEO nanofibrous membranes as a new effective solution for hindering delamination in epoxy-based composite laminates.

Amperometric room temperature hydrogen gas sensor based on the conjugated polymers of polypyrrole–polyethylene oxide nanofibers synthesised via electrospinning

Amperometric room temperature hydrogen gas sensor based on the conjugated polymers of polypyrrole–polyethylene oxide nanofibers synthesised via electrospinning

Living Bacteria Directly Embedded into Electrospun Nanofibers: Design of New Anode for Bio-Electrochemical Systems

The aim of this work is the optimization of electrospun polymeric nanofibers as an ideal reservoir of mixed electroactive consortia suitable to be used as anodes in Single Chamber Microbial Fuel Cells (SCMFCs). To reach this goal the microorganisms are directly embedded into properly designed nanofibers during the electrospinning process, obtaining so called nanofiber-based bio-composite (bio-NFs). This research approach allowed for the designing of an advanced nanostructured scaffold, able to block and store the living microorganisms inside the nanofibers and release them only after exposure to water-based solutions and electrolytes. To reach this goal, a water-based polymeric solution, containing 5 wt% of polyethylene oxide (PEO) and 10 wt% of environmental microorganisms, is used as the initial polymeric solution for the electrospinning process. PEO is selected as the water-soluble polymer to ensure the formation of nanofiber mats offering features of biocompatibility for bacteria proliferation, environment-friendliness and, high ionic conductivity. In the present work, bio-NFs, based on living microorganisms directly encapsulated into the PEO nanofiber mats, were analyzed and compared to PEO-NFs made of PEO only. Scanning electron microscopy allowed researchers to confirm the rise of a typical morphology for bio-NFs, evidencing the microorganisms’ distribution inside them, as confirmed by fluorescence optical microscopy. Moreover, the latter technique, combined with optical density measurements, allowed for demonstrating that after electrospinning, the processed microorganisms preserved their proliferation capability, and their metabolic activity after exposure to the water-based electrolyte. To demonstrate that the energy-production functionality of exo-electrogenic microorganisms was preserved after the electrospinning process, the novel designed nanomaterials, were directly deposited onto carbon paper (CP), and were applied as anode electrodes in Single Chamber Microbial Fuel Cells (SCMFCs). It was possible to appreciate that the maximum power density reached by bio-NFs, which resulted in being double of the ones achieved with PEO-NFs and bare CP. SCMFCs with bio-NFs applied as anodic electrodes reached a current density value, close to (250 ± 5.2) mA m−2, which resulted in being stable over time and was comparable with the one obtained with carbon-based electrode, thus confirming the good performance of the whole device.

Adsorption of Pharmaceutical Contaminants from Aqueous Solutions Using N,O-Carboxymethyl Chitosan/Polyethylene Oxide (PEO) Electrospun Nanofibers

Residues of pharmaceutical and direct metabolites discharged into the aquatic environment have become a challenge for wastewater treatment facilities due to their increase in concentration and their different physicochemical properties. These emerging contaminants are daily detected in surface water and wastewater discharged by municipalities. To remediate the contaminated water, various methods are currently used including primary, secondary, and tertiary advanced treatments. However, some economic and environmental limitations have forced the scientific community to develop alternative disinfection processes to purify wastewater. As such, the adsorption strategy represents a “green” low-cost and effective solution to remove pollutants from water. In this study, a nanomaterial made of N,O-carboxymethyl chitosan (N,O-CMCS) was prepared using chitosan (CS) and monochloroacetic acid under various conditions. N,O-CMCS electrospun was synthetized with the copolymer polyethylene oxide (PEO) to create nanofiber membranes showing a better specificity toward diversified contaminants depending on the pH of medium. The developed adsorbent was used to remove fluoxetine (FLX) from aqueous solutions. The new nanomaterial was characterised using FTIR, NMR, and SEM techniques. Sorption batch tests were carried out using high-performance liquid chromatography and ultraviolet diode array detector (HPLC-UV DAD) under controlled pH experimental conditions to determine the contaminant removal capacity of the nanomaterial. The promising adsorption results obtained with N,O-CMCS/PEO nanofibers are among the best ones obtained so far in comparison to other commercial and synthetized adsorbents tested for FLX’s adsorption. Kinetic experiments were also performed to investigate effects of contact times on the FLX adsorption. Experimental results were fitted to both common kinetic models pseudo-first and second order. The latter kinetic model described the best the sorption on surface. It revealed a possible chemisorption mechanism with electrostatic bounding for N,O-CMCS/PEO nanofibers.

Manufacturing of Submicrofluidic Channels Based on Near-field Electrospinning with PEO

Background: Microfluidic channels have been widely applied in biomedicine and microelectronics. However, the manufacturing methods of microfluidic channel devices, such as photolithography, three-dimensional printing and Melt-electrospinning direct writing (MEDW), have the problem of high cost and complex process, which still can't reach a sub-micron scale stably. Method: To improve the resolution of microfluidic channels, we developed a simple and flexible method to fabricate polydimethylsiloxane (PDMS) submicrofluidic channels. It depends on the following steps: (1) Direct Writing Polyethylene oxide (PEO) nanofiber by Near-field Electrospinning (NFES). (2) Packaging the nanofiber with PDMS. (3) Obtaining the PDMS submicrofluidic channel by inverted mode of PEO nanofiber. Results: According to the result of the experiment, nanofiber can be stably prepared under the following conditions, the electrode-to-collector distance of 3.0 mm, the voltage of 1.7 KV, the collector moving speed of 80mm/s and the mixed solutions of ethanol and deionized water (1:1). Finally, the PDMS submicrofluidic channel was manufactured by NFES and PDMS molding technique, and the diameter of the channel was 0.84±0.08 μm. Conclusion: The result verified the rationality of that method. In addition, the method can be easily integrated with high resolution channels for various usages, such as microelectronics, micro electro mechanical systems, and biomedical.

Preparation and characterization of poly(ethylene oxide)/zinc oxide nanofibrous scaffold for chronic wound healing applications.

Skin, the first barrier to pathogens, loses its integrity and function after an injury. The presence of an antibacterial dressing at the wound site may prevent bacterial invasion and also improve the healing process. The current study aimed to fabricate a biomimetic membrane with antibacterial properties for healing chronic wounds. The membranes, fabricated through electrospinning, are comprised of poly(ethylene oxide) (PEO) and zinc oxide nanoparticles (ZnO-NPs) as the main biomaterial and antibacterial agent, respectively. Antibacterial activity, cell attachment and viability were tested to evaluate the biological properties of the membranes. The optimal cell compatible concentration of ZnO-NPs was determined for further studies. In vitro characterization of the membranes was performed to confirm their suitable properties for wound healing. The antibacterial PEO/ZnO-NP membrane containing 2% of nanoparticles showed no cell toxicity, and human fibroblast cells were able to adhere and proliferate on the scaffold. The in vitro results from the tensile test, wettability, porosity, and protein adsorption revealed appropriate properties of the membrane as a scaffold for skin tissue engineering. Synthetic polymers have been widely used for tissue engineering applications. The proper characteristics of PEO nanofibers, including a high ratio of surface/volume, moderate hydrophilicity and good mechanical properties, make this polymer interesting for skin regeneration. The results demonstrate the potential of the antibacterial PEO/ZnO-NP membrane to be used as an engineered scaffold to improve the wound healing process.

Nanofibers as a Delivery System for Arbuscular Mycorrhizal Fungi

Arbuscular mycorrhizal fungi (AMF) are beneficial symbiotic organisms that play an important role in the water absorption and nutrient assimilation for a wide variety of plants. In this work, the use of polyethylene oxide (PEO) nanofibers was studied as a delivery system for AMF through the coated nanofibers of common bean seeds (Phaseolus vulgaris L var. José Beta). Thus, the effect of PEO nanofibers on the infective capacity of AMF and the indicator parameters of plant growth promotion (height plant, root length, number of leaves, number of flower buds, number of pods, fresh weight, and dry weight) was examined. Likewise, the mycorrhizal colonization rate and the indicator parameters of plant growth promotion between a conventional inoculation strategy and inoculation by nanofiber-coated seeds were compared. The results show that PEO nanofibers did not have any negative effect on the infective capacity of AMF or the indicator parameters of plant growth promotion. On the other hand, the inoculated bean plants showed a significant increase of 200, 140, and 143% in the number of flower buds, fresh weight, and dry weight, respectively. Moreover, no significant differences were observed in the mycorrhizal colonization rate between the two inoculation strategies used, even though the inoculant dose was 97% lower for the nanofiber-coated seeds. Therefore, nanofibers could represent a promising alternative as a seed-coating material and for the development of easy-to-apply and economically viable technologies for the application of AMF inoculants in the fields of agriculture, horticulture, forestry, ecological remediation, and related areas.

One-dimensional micro-scale patterned conjugated polymer structures in bilayer architecture and light emitting diode application

To maximize luminescent brightness in organic light-emitting diode (OLED) systems, charge transport dynamics of emissive layer is needed to be controlled. Herein, we pattern aligned micrometer scale conjugated polymer structures using a solution based processing method. Super yellow (SY)-polyethylene oxide (PEO) nanofibers were electrospun using simple uniaxial electrospinning method. A hybrid bilayer of SY-PEO fiber and poly (9,9-dioctylfluorene) derivative PFO film was formed by the sequential deposition of the electrospun fiber and spin-coated film. The maximum brightness of hybrid LED devices was increased over 1.7 fold to that of film-film bilayer device possessing same average film thickness. Besides, optical properties such as absorption/luminescence of SY were modulated by the rapid crystallization and solvent evaporation during electrospinning process compared to the spin-coated film. The electroluminescence enhancement and color control was attributed to balanced charge transport and enhanced Förster resonance energy transfer (FRET). A patterned hybrid bilayer was formed by the combination of the SY-PEO fiber and PFO thin film via solution based sequential deposition methods, including electrospinning and spin-coating. Thanks to the molecular packing and increment of conjugation length in electrospun SY-PEO nanofibers, such nanofibers exhibited distinct optical properties in comparison with SY thin film. Micro-dimensional alignment of conjugated polymer fiber-film bilayer device exhibited superior electroluminescent brightness besides color tunability of constructed LED device. Such enhancements were attributed to balanced charge transport and enhanced Förster resonance energy transfer in fiber-film hybrid emissive bilayer. • Aligned conjugated polymer fibers by electrospinning process. • Electrospun super yellow -polyethylene oxide nanofibers. • One-dimensional conjugated polymer microstructures in fiber-film hybrid bilayer architecture. • Utilization of conjugated polymer nanofibers in light emitting devices.

Chitosan-PEO nanofiber mats for copper removal in aqueous solution using a new versatile electrospinning collector

Electrospun chitosan–polyethylene oxide nanofiber mats were fabricated using a new collector design. Besides being reusable, it allows to assess the desired morphology of the mat in a quicker way. To test its efficiency, nonwoven mats designed for water treatment applications were prepared using conditions never been reported before. Under these conditions, continuous and flawless nanofibers of 151 ± 36 nm in diameter were achieved. Adsorption capacity of the mats for copper ions in aqueous solutions were investigated. Results showed that sorption equilibrium was achieved within 150 min with a homogenous distribution of copper ions within the nanofibrous mats. The pseudo-second order kinetic model best fitted the experimental data. The Langmuir isotherm best described the sorption process with a maximum adsorption capacity of 124 mg/g for trial temperatures ranging from 25 to 60 °C. Thermodynamic parameters (ΔG°, ΔH° and ΔS°) demonstrate that the adsorption was feasible, endothermic and spontaneous. The desorption potential and mat’s reusability were also studied. Results reveal that the electrospun chitosan mats can be desorbed and reused up to 5 cycles without significant loss in adsorption performance.

A novel double-layered polymeric nanofiber-based dressing with controlled drug delivery for pain management in burn wounds

Localized application of drugs at specific wound area has many advantages and less side effects as compared with other drug administrative routes. Burn patients suffer from swear pain, and the major focus of medical practitioners includes pain and infection management. Advancements in material science, especially nanofibers, have gained a lot of attention in various applications such as filtration, nanocomposites, protection and medical sciences. Nanofibers (NFs) loaded with drug, applied on local wound area, can reduce the side effects as well as can provide quick action. This study dealt with the fabrication of drug-loaded NFs for better pain management with controlled drug release. Two layers of NFs were fabricated with different drugs using electrospinning. Contact layer of polyethylene oxide nanofibers was loaded with gabapentin (a nerve pain killer) for quick action followed by second layer of sodium alginate nanofibers with acetaminophen (mild pain killer) for synergizing the effect. The fabricated dressing was characterized using scanning electron microscope, Fourier transform infrared spectroscopy, thermogravimetric analysis, UV–Vis spectroscopy, drug release rate and liquid absorption tests. Different drug release kinetic models were applied to the experimental data, and drug release from the first layer was best followed by first-order kinetic model, while, the second layer was best described by Hixson–Crowell kinetic model. The combination of quick release of strong nerve pain killer followed by slow release of mild pain killer could be a good tool to reduce pain scores in a more professional manner with less side effects in burn patients.