Poly Ethylene Glycol Side Chains Research Articles

Polymer coating for antiicing and deicing

Ice accretion may cause serious safety risk and huge economic loss for outdoor facilities. Herein, we report a waterborne polymeric coating based on a copolymer network of methacrylic acid (MAA), acrylamide (AM), N-2-hydroxyethyl acrylamide (HEAA), and methoxypolyethylene glycol (MPEG) with free polyethylene glycol (PEG) dispersed in it. Owing to the good compatibility of free PEG chains and the PEG side chains of the copolymer, the hydrogen bonding between acrylic copolymer and PEG, the free PEG chains can well be trapped in the network with some segments out of the mesh as short PEG chains are grafted on the coating surface, so that the surface has liquid-like properties. Water droplets can readily slip off on the coating surface with a small sliding angle (<30°). Particularly, the surface can hold the properties for a long duration upon water flushing, cycle of wetting-drying, and salt spraying tests. The polymer coating can find application in icing prevention and removal.

A novel method for enhancing coating performance of emulsified asphalt mortar to RAP in cold recycled mixture

Emulsified asphalt mortar (EAM) is prone to agglomeration and has poor adhesion to reclaimed asphalt pavement material (RAP) with residual-aged asphalt, which can deteriorate the durability of emulsified asphalt cold recycled mixture (EA-CRM). In this work, silane coupling agent (SCA, 3.75 wt% and 6.25 wt% by weight of emulsified asphalt) and polycarboxylate superplasticizer (PCS, 3.75 wt%, 7.5 wt%, and 11.25 wt%) were used to modify the EAM in order to improve the coating performance of EAM on RAP. Seven kinds of samples with different modifier dosages were prepared. Modification mechanism, micro-morphological changes, workability, rheological property, and coating degree of EAM on RAP were investigated. Furthermore, action mechanism of the SCA/PCS composite modifier (SPCM) in EAM/RAP and the cost-benefit were analyzed. Results show that EAM is physically modified by SPCM. Carboxylic group and polyethylene glycol side chain in PCS possess excellent improvement on the workability of EAM, while silanol group generated by hydrolysis of SCA plays a major role in improving coating performance. An appropriate dosage of SPCM can improve the workability of EAM, and enhance its shear deformation resistance and elastic properties. Meanwhile, SPCM can improve the coating degree of EAM on RAP, but SPCM with a PCS dosage exceeding 7.50 wt% can cause EAM to slightly detach from RAP surface. Therefore, 6.25 wt% of SCA and 7.50 wt% of PCS were proposed to modify EAM to obtain the best overall performance. The application of SPCM had a good cost performance and additional environmental benefits based on the optimal dosage. This work provides a novel method to enhance the coating performance of EA-CRM while facilitating the expansion of RAP applications.

Single-chain folding and self-assembling of amphiphilic polyethyleneglycol-modified fluorinated styrene homopolymers in water solution

Amphiphilic tetrafluorostyrene monomers (EFSn) carrying in the para position a polyethyleneglycol (PEG) chain with varied lengths (n = 3–13) were synthesized and polymerized by ARGET-ATRP to obtain the corresponding amphiphilic homopolymers pEFSn-x with controlled and tailored polymerization degrees (x = 8–135). All polymers presented a reversible thermoresponsive LCST-type behavior, in water/methanol mixture when n ≤ 4 or in pure water when n ≥ 8, with a cloud point (Cp) temperature in the range 30–40 °C strictly dependent on the length of the PEG side chain. Combined small angle X-scattering (SAXS) and dynamic light scattering (DLS) measurements were used to study the self-assembly behavior in water of the water-soluble amphiphilic homopolymers. SAXS confirmed the formation of compact-sized and spherical single-chain self-folded nanostructures below Cp, that generally presented small hydrodynamic diameters (Dh ≤ 11 nm) as proven by DLS analysis. Above Cp, much larger multi-chain aggregates were formed (Dh ≥ 800 nm), that reversibly turned back to collapsed nanostructures on cooling below the Cp temperature. By contrast, the polymers were not able to self-assemble in THF or DMF solutions, in which they adopted conventional random coil conformations.

Specific molecular design of polycarboxylate polymers exhibiting optimal compatibility with clay contaminants in concrete

It is widely recognized that the dispersing ability of polycarboxylate superplasticizers (PCEs) could be hindered due to the presence of clay contaminants in concrete. In this study, a series of allyl ether-based polycarboxylate superplasticizers possessing short polyethylene glycol side chains was successfully synthesized and probed for their clay tolerance. The resulting PCE polymers were characterized via Size Exclusion Chromatography (SEC) to obtain their molecular properties. Thereafter, their dispersing ability was probed in the absence and presence of sodium bentonite. Allyl ether-based polycarboxylate (APEG) polymers possessing short side chains were found to exhibit enhanced clay resistance as compared to that of conventional MPEG PCEs holding long pendant chains. The mode of interaction between APEG PCEs and bentonite was investigated via sorption and XRD measurements. The data revealed that APEG PCEs possessing a lower side chain density intercalate less into the interlayer space of bentonite than those exhibiting higher side chain density.

Working Mechanisms and Design Principles of Comb-like Polycarboxylate Ether Superplasticizers in Cement Hydration: Quantitative Insights for a Series of Well-Defined Copolymers

Cement and concrete are the most widely used building materials and contain comb copolymers such as polycarboxylate ethers (PCEs) as hydration and setting modifiers. The working mechanisms of these additives in cement hydration have remained uncertain, which limits the rational design of additives and of new cement materials with lower CO2 footprint. We identified quantitative correlations between PCE copolymer structure, adsorption, and cement setting properties for a series of copolymer structures and concentrations, combined with insights into conformations and adsorption mechanisms by atomistic simulations. The PCE copolymers have only a small fraction of polydispersity compared to earlier studies, and molecular dynamics simulations utilize Interface force field models for C-S-H phases that enable order-of-magnitude more accurate insights into the dynamics of the nanoscale polymer interfaces compared to earlier models. Two distinct sets of property correlations were discovered. (1) The carboxylate content of the PCEs, i.e., the molar density of ionic side groups per unit mass, correlates with the adsorbed amount of polycarboxylate ethers onto cement pastes, the conductivity of the cement paste, and the retardation of the acceleration period of cement hydration. (2) The combination of the ionic character of the polymer backbone and the length of non-ionic polyethylene glycol (PEG) side chains correlates with the water-to-cement ratio necessary for processing, zeta potentials, and fluidity of the cement pastes in mini slump tests. Simulations indicate that PCE adsorption onto cement particles involves migration of calcium ions in the acrylate backbone onto the calcium silicate hydrate surface, or calcium hydroxide surfaces, followed by ion pairing of the anionic polymer backbone with the positively charged mineral surface. PEG side chains exhibit no affinity to the mineral surface. The best fluidity and water reduction are achieved using an optimum ratio of the volume of PEG side chains to the volume of the anionic backbone, balancing sufficient surface bonding through the ionic backbone and minimization of interparticle forces by the non-ionic PEG side chains. A charge density too low prevents effective adsorption, and a charge density too high leads to multilayer deposition and ionic agglomeration forces between coated particles that reduce the fluidity and increase the necessary water-to-cement ratio. The proposed mechanism supersedes prior models and provides quantitative metrics for the rational design of polymer additives for cement and related particle dispersions.

Tuning the micro-phase separation of the PES-g-PEG comb-like copolymer membrane for efficient CO2 separation

As a common CO2 separation membrane material, polyethylene glycol (PEG) with ether oxygen groups shows high dissolution selectivity to CO2. However, high molecular weight PEG has strong crystallinity, resulting in low gas flux, while the low molecular weight PEG has poor mechanical properties. Block copolymers containing PEG segments can address this challenge but are difficult to synthesize. In this work, a series of polyether sulfone (PES) comb-like copolymer with PEG side chains were prepared by the polycondensation followed by the thiol-ene click chemistry. By manipulating the density and length of PEG side chains (Mn = 550, 1000, 2000) to adjust the fine structure of the micro-phase separation, the gas separation performance of the PES-g-PEG membrane was optimized. The PES-g-PEG polymers have two glass transition temperatures (Tg), which are attributed to the PES main chain and PEG side chains. The Tg-PEG and Tg-PES difference (ΔTg) is highly correlated with the PEG side chain density and can be used to interpret the phase separation degree. The copolymer membrane with shorter PEG side chains achieved higher chain density and more developed micro-phase separation, which was facilitated by thermal annealing. As a result, PES A-g-PEG550 membrane shows the best gas separation performance with the CO2 permeability of 26.8 Barrer and the CO2/N2 selectivity of 27.6. The permeability variation with the microstructure of PES-g-PEG mostly relies on the side chain density rather than volume fraction or side chain molecular weight. We believe this study of the gas separation performance of the comb-like copolymer material is meaningful for the further application of membrane technology in CO2 capture and separation.

3D-printable supramolecular hydrogels with shear-thinning property: fabricating strength tunable bioink via dual crosslinking

3-dimensional (3D) bioprinting technology provides promising strategy in the fabrication of artificial tissues and organs. As the fundamental element in bioprinting process, preparation of bioink with ideal mechanical properties without sacrifice of biocompatibility is a great challenge. In this study, a supramolecular hydrogel-based bioink is prepared by polyethylene glycol (PEG) grafted chitosan, α-cyclodextrin (α-CD) and gelatin. It has a primary crosslinking structure through the aggregation of the pseudo-polyrotaxane-like side chains, which are formed from the host-guest interactions between α-CD and PEG side chain. Apparent viscosity measurement shows the shear-shinning property of this bioink, which might be due to the reversibility of the physical crosslinking. Moreover, with β-glycerophosphate at different concentrations as the secondary crosslinking agent, the printed constructs demonstrate different Young's modulus (p < 0.001). They could also maintain the Young's modulus in cell culture condition for at least 21 days (p < 0.05). By co-culturing each component with fibroblasts, CCK-8 assay demonstrate cellular viability is higher than 80%. After bioprinting and culturing, immunofluorescence staining with quantification indicate the expression of Ki-67, Paxillin, and N-cadherin is higher in day 14 than those in day 3 (p < 0.05). Oil red O and Nissl body specific staining reflect strength tunable bioink may have impact on the cell fate of mesenchymal stem cells (p < 0.05). This work might provide new idea for advanced bioink in the application of re-establishing complicated tissues and organs.

Thermal Analysis of Crystallization and Phase Transition in Novel Polyethylene Glycol Grafted Butene-1 Copolymers.

Copolymerization is an effective strategy to regulate the molecular structure and tune crystalline structures. In this work, novel butene-1 copolymers with different polyethylene glycol (PEG) grafts (number-average molecular weight Mn = 750, 2000, and 4000 g/mol) were synthesized, for the first time introducing long-chain grafts to the polybutene-1 main chain. For these PEG-grafted copolymers, crystallization, melting, and phase transition behaviors were explored using differential scanning calorimetry. With respect to the linear homopolymer, the incorporation of a trimethylsilyl group decreases the cooling crystallization temperature (Tc), whereas the presence of the long PEG grafts unexpectedly elevates Tc. For isothermal crystallization, a critical temperature was found at 70 °C, below which all polyethylene glycol-grafted butene-1 (PB-PEG) copolymers have faster crystallization kinetics than polybutene-1 (PB). The subsequent melting process shows that for the identical crystallization temperature, generated PB-PEG crystallites always have lower melting temperatures than that of PB. Moreover, the II-I phase transition behavior of copolymers is also dependent on the length of PEG grafts. When form II, obtained from isothermal crystallization at 60 °C, was annealed at 25 °C, PB-PEG-750, with the shortest PEG grafts of Mn = 750 g/mol, could have the faster transition rate than PB. However, PB-PEG-750 exhibits a negative correlation between transition rate and crystallization temperature. Differently, in PB-PEG copolymers with PEG grafts Mn = 2000 and 4000 g/mol, transition rates rise with elevating crystallization temperature, which is similar with homopolymer PB. Therefore, the grafting of the PEG side chain provides the available method to tune phase transition without sacrificing crystallization capability in butene-1 copolymers.

Synthesis and Comparative Studies of Solvent-Free Brush Polymer Electrolytes for Lithium Batteries

For next generation lithium batteries, solid polymer electrolytes (SPEs) are essential to meet the challenges of higher safety standards, higher specific energy, and easy processing. Linear polyethylene glycol (PEG) based SPEs are by far the most investigated systems for these requirements. However, the weak mechanical properties, high crystallinity, and consequently moderate ionic conductivity prevent these systems from being used in electrochemical storage devices. We address the question of the influence of the polymer architecture on the above properties by synthesizing bottlebrush copolymers carrying PEG side chains and comparing their electrochemical properties and ionic conductivity with those of the respective linear PEG polymers. For obtaining bottlebrush polymers, first methacrylate (PEGMEMA) and norbornene (Nb-PEGME) macromonomers carrying PEG side chains were synthesized and polymerized using either free radical polymerization or ring-opening metathesis polymerization (ROMP), respectively. We ...

Construction of reversible nano reactor by thermo-responsive polymeric surfactant: Its application in chloromethylation of naphthalene

This study focuses on the construction of a reversible nano reactor based on the thermo-responsive property of polyethylene glycol side chain hanging on the main chain of polystyrene along with quaternary ammonium groups. The polystyrene derivates are obtained by polymerization of vinylbenzyl PEG ether and/or vinylbenzyl quaternary ammonium. The vinylbenzyl PEG ether and vinylbenzyl quaternary ammonium were prepared by the reaction of vinylbenzyl chloride with diol and trimethylamine. The structure of vinylbenzyl derivate was characterized by 1H NMR, FT-IR, UV–vis and Q-TOF mass spectroscopy. The micelle properties of polymers were characterized by UV–vis spectroscopy and optical microscope. The micelle catalytic activities were evaluated using the chloromethylation of naphthalene as the model. The conversion of naphthalene is up to 93% at the optimized reaction condition using the polystyrene with PEG-like side chains and quaternary ammonium P(3-4) as the micelle catalyst. The catalyst can be isolated just by separation of the interlayer between the organic phase and water phase, and recycled six time without significant activity loss.

6-Benzhydryl-4-amino-quinolin-2-ones as Potent Cannabinoid Type 1 (CB1) Receptor Inverse Agonists and Chemical Modifications for Peripheral Selectivity.

A novel series of 6-benzhydryl-4-amino-quinolin-2-ones was discovered as cannabinoid type 1 receptor (CB1R) inverse agonists based on the high-throughput screening hit, compound 1a. Structure-activity relationships were studied to improve in vitro/in vivo pharmacology and restrict distribution to the peripheral circulation. We adopted several strategies such as increasing topological polar surface area, incorporating discrete polyethylene glycol side chains, and targeting P-glycoprotein (P-gp) to minimize access to the brain. Compound 6a is a P-gp substrate and a potent and highly selective CB1R inverse agonist, demonstrating excellent in vivo metabolic stability and a low brain to plasma ratio. However, brain receptor occupancy studies showed that compound 6a may accumulate in brain with repeat dosing. This was evidenced by compound 6a inhibiting food intake and inducing weight loss in diet-induced obese mice. Thus, a strategy based on P-gp efflux may not be adequate for peripheral restriction of the disclosed quinolinone series.

A Study on the Impact of Poly(3-hexylthiophene) Chain Length and Other Applied Side-Chains on the NO₂ Sensing Properties of Conducting Graft Copolymers.

The detection and concentration measurements of low concentrations of nitrogen dioxide (NO2) are important because of its negative effects on human health and its application in many fields of industry and safety systems. In our approach, conducting graft copolymers based on the poly(3-hexylthiophene) (P3HT) conducting polymer and other side-chains, polyethylene glycol (PEG) and dodec-1-en, grafted on a poly(methylhydrosiloxane) backbone, were investigated. The grafts containing PEG (PEGSil) and dodec-1-en (DodecSil) in two variants, namely, fractions with shorter (hexane fraction -H) and longer (chloroform fraction -CH) side-chains of P3HT, were tested as receptor structures in NO2 gas sensors. Their responses to NO2, within the concentration range of 1–20 ppm, were investigated in an nitrogen atmosphere at different operating temperatures—room temperature (RT) = 25 °C, 50 °C, and 100 °C. The results indicated that both of the copolymers with PEG side-chains had higher responses to NO2 than the materials with dodec-1-en side-chains. Furthermore, the results indicated that, in both cases, H fractions were more sensitive than CH fractions. The highest response to 1 ppm of NO2, from the investigated graft copolymers, had PEGSil H, which indicated a response of 1330% at RT and 1980% at 100 °C. The calculated lower-limit of the detection of this material is lower than 300 ppb of NO2 at 100 °C. This research indicated that graft copolymers of P3HT had great potential for low temperature NO2 sensing, and that the proper choice of other side-chains in graft copolymers can improve their gas sensing properties.

Enhancing clot properties through fibrin-specific self-cross-linked PEG side-chain microgels.

Excessive bleeding and resulting complications are a major cause of death in both trauma and surgical settings. Recently, there have been a number of investigations into the design of synthetic hemostatic agents with platelet-mimicking activity to effectively treat patients suffering from severe hemorrhage. We developed platelet-like particles from microgels composed of polymers carrying polyethylene glycol (PEG) side-chains and fibrin-targeting single domain variable fragment antibodies (PEG-PLPs). Comparable to natural platelets, PEG-PLPs were found to enhance the fibrin network formation in vitro through strong adhesion to the emerging fibrin clot and physical, non-covalent cross-linking of nascent fibrin fibers. Furthermore, the mechanical reinforcement of the fibrin mesh through the incorporation of particles into the network leads to a ∼three-fold decrease of the overall clot permeability as compared to control clots. However, transport of biomolecules through the fibrin clots, such as peptides and larger proteins is not hindered by the presence of PEG-PLPs and the altered microstructure. Compared to control clots with an elastic modulus of 460+/-260 Pa, PEG-PLP-reinforced fibrin clots exhibit higher degrees of stiffness as demonstrated by the significantly increased average Younǵs modulus of 1770 +/±720 Pa, as measured by AFM force spectroscopy. Furthermore, in vitro degradation studies with plasmin demonstrate that fibrin clots formed in presence of PEG-PLPs withstand hydrolysis for 24 h, indicating enhanced stabilization against exogenous fibrinolysis. The entire set of data suggests that the designed platelet-like particles have high potential for use as hemostatic agents in emergency medicine and surgical settings.

Localized Fe(II)-Induced Cytotoxic Reactive Oxygen Species Generating Nanosystem for Enhanced Anticancer Therapy.

The anticancer therapy on the basis of reactive oxygen species (ROS)-mediated cellular apoptosis has achieved great progress. However, this kind of theraputic strategy still faces some challenges such as light, photosensitizer and oxygen (O2) dependence. In this article, a ROS-mediated anticancer therapy independent of light, photosensitizer and oxygen was established based on a Fe2+-induced ROS-generating nanosystem. First, artemisinin (ART) was loaded in porous magnetic supraparticles (MSP) by a nanodeposition method. Then, the poly(aspartic acid)-based polymer, which consisted of dopamine, indocyanine green, and polyethylene glycol side chain, was coated onto the surface of ART-loaded MSP. When the nanoparticles entered into cancer cells, a reaction of Fe2+-mediated cleavage of the endoperoxide bridge contained in ART occurred and subsequent a large amount of ROS was generated. Moreover, a NIR light was used to effectively increase the local temperature of tumor in virtue of the superior photothermal effects of MSP, which enabled us to accelerate the ROS generation and achieved an enhanced ROS yield. The newly developed nanodrug system displayed a high level of intracellular ROS generation, leading to the desired killing efficacy against malignant cells and solid tumor. This smart nanosystem holds great potential to overcome the existing barrier in PDT and opens a promising avenue for anticancer therapy.

Amphiphilic polymer based on fluoroalkyl and PEG side chains for fouling release coating

Under static conditions, fouling release coating could not express good release property to marine organisms. Amphiphilic polymer with mixture of fluorinated monomer and short side group of polyethylene glycol (PEG) was synthesized. And also we studied the ability of amphiphilic polymer to influence the surface properties and how it controlled the adhesion of marine organisms to coated surfaces. By incorporating fluorinated monomer and PEG side chain into the polymer, the effect of incorporating both polar and non-polar groups on fouling-release coating could be studied. The dry surface was characterized by three-dimensional digital microscopy and scanning electron microscopy (SEM), and the morphology of the amphiphilic fouling release coating showed just like flaky petal. The amphiphilic polymer in fouling release coating tended to reconstruct in water, and the ability was examined by static contact angle, which was smaller than the PDMS (polydimethylsiloxane) fouling release coating. Also surface energy was calculated by three solvents, and surface energy of amphiphilic fouling release coating was higher than that of the PDMS fouling release coating. To understand more about its fouling release property, seawater exposure method was adopted in gulf of Qingdao port. Fewer diatoms Navicula were found in biofilm after using amphiphilic fouling release coating. In general, coating containing both PEG and fluorinated side chain possessed certain fouling release property.

Atomistic dynamics simulation to solve conformation of model PCE superplasticisers in water and cement pore solution

The working mechanism of polycarboxylate ether (PCE) type superplasticisers in concrete was studied from the point of view of conformational changes of the polymer simulated by molecular dynamics in pure water and cement pore solution. Three typical types of PCEs, namely a methoxy polyethyleneglycol monomethacrylate–sodium methacrylate copolymer (PCEM), a polyethyleneglycol mono allyl ether–sodium maleate copolymer (PCEA) and a polyethyleneglycol mono (3-methyl-3-butenyl) ether–sodium acrylate copolymer (PCEI) were investigated using large-scale atomistic molecular dynamics simulations. It was observed that the PCE polymers which possess negatively charged backbones were stretched in water due to electrostatic repulsion. However, they were found to be significantly shrunken and distorted in synthetic cement pore solution, depending on the polyethylene glycol (PEG) density along the backbone, resulting in the aggregation of PEG side chains due to the salting-out effect.

Fluorine-19 magnetic resonance imaging probe for the detection of tau pathology in female rTg4510 mice.

Aggregation of tau into neurofibrillary tangles (NFTs) is characteristic of tauopathies, including Alzheimer's disease. Recent advances in tau imaging have attracted much attention because of its potential contributions to early diagnosis and monitoring of disease progress. Fluorine-19 magnetic resonance imaging (19 F-MRI) may be extremely useful for tau imaging once a high-quality probe has been formulated. In this investigation, a novel fluorine-19-labeling compound has been developed as a probe for tau imaging using 19 F-MRI. This compound is a buta-1,3-diene derivative with a polyethylene glycol side chain bearing a CF3 group and is known as Shiga-X35. Female rTg4510 mice (a mouse model of tauopathy) and wild-type mice were intravenously injected with Shiga-X35, and magnetic resonance imaging of each mouse's head was conducted in a 7.0-T horizontal-bore magnetic resonance scanner. The 19 F-MRI in rTg4510 mice showed an intense signal in the forebrain region. Analysis of the signal intensity in the forebrain region revealed a significant accumulation of fluorine-19 magnetic resonance signal in the rTg4510 mice compared with the wild-type mice. Histological analysis showed fluorescent signals of Shiga-X35 binding to the NFTs in the brain sections of rTg4510 mice. Data collected as part of this investigation indicate that 19 F-MRI using Shiga-X35 could be a promising tool to evaluate tau pathology in the brain.

Modulating the Cellular Immune Response of Oligonucleotides by Brush Polymer-Assisted Compaction.

Unwanted stimulation of the innate immune system by foreign nucleic acids has been one of the major barriers preventing bioactive sequences from reaching market. Foreign nucleic acids can be recognized by multiple pattern recognition receptors (PRRs), which trigger a signaling cascade to activate host defense systems, leading to a range of side effects. This study demonstrates that polyethylene glycol (PEG)-modified DNA strands can greatly reduce the activation of the innate immune system, and the extent of reduction is dependent upon polymer architecture. Highly branched brushes with long PEG side chains achieve the best suppression by blocking PRR interactions via a local steric effect. Interestingly, the brush polymer creates little barrier toward DNA-DNA interaction. Quantification of inflammatory cytokines in both mRNA and protein levels as well as the extent of cellular uptake shows a direct correlation between steric congestion and reduction of cellular immune response. These results suggest that the brush architecture offers unique advantages for PEGylating oligonucleotides in the context of minimizing unwanted immune system activation.

Binding and lubrication of biomimetic boundary lubricants on articular cartilage.

The glycoprotein, lubricin, is the primary boundary lubricant of articular cartilage and has been shown to prevent cartilage damage after joint injury. In this study, a library of eight bottle-brush copolymers were synthesized to mimic the structure and function of lubricin. Polyethylene glycol (PEG) grafted onto a polyacrylic acid (pAA) core mimicked the hydrophilic mucin-like domain of lubricin, and a thiol terminus anchored the polymers to cartilage surfaces much like lubricin's C-terminus. These copolymers, abbreviated as pAA-g-PEG, rapidly bound to cartilage surfaces with binding time constants ranging from 20 to 39 min, and affected lubrication under boundary mode conditions with coefficients of friction ranging from 0.140 ± 0.024 to 0.248 ± 0.030. Binding and lubrication were highly correlated (r2 = 0.89-0.99), showing that boundary lubrication in this case strongly depends on the binding of the lubricant to the surface. Along with time-dependent and dose-dependent behavior, lubrication and binding of the lubricin-mimetics also depended on copolymer structural parameters including pAA backbone length, PEG side chain length, and PEG:AA brush density. Polymers with larger backbone sizes, brush sizes, or brush densities took longer to bind (p < 0.05). Six of the eight polymers reduced friction relative to denuded cartilage plugs (p < 0.05), suggesting their potential to lubricate and protect cartilage in vivo. In copolymers with shorter pAA backbones, increasing hydrodynamic size inhibited lubrication (p < 0.08), while the opposite was observed in copolymers with longer backbones (p < 0.05). These polymers show similar in vitro lubricating efficacy as recombinant lubricins and as such have potential for in vivo treatment of post-traumatic osteoarthritis. © 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 35:548-557, 2017.

Luteinizing hormone-releasing hormone peptide tethered nanoparticulate system for enhanced antitumoral efficacy of paclitaxel.

Paclitaxel (PTX) is an effective anticancer agent used in the therapy of a wide variety of cancers. However, the drug is difficult to formulate due to its low solubility, and therefore, it is administered under slow infusion with castor oil/ethanol solution as surfactant that causes serious side effects. This investigation investigates leutinizing hormone releasing hormone (LHRH)-tethered nanparticulate system as modality for cancer-specific delivery of PTX and therefore minimizing the adverse effects. LHRH-tethered poly(lactic-co-glycolic acid) copolymer with poly ethylene glycol side chain was synthesized, characterized and employed to formulate PTX-loaded nanoparticulate system. The developed nanoparticulate appears to be proficient in carrying as well as targeted delivery of PTX with improved therapeutic efficacy and better safety.