Polyethylene Glycol-mediated Transformation Research Articles

Establishment and optimization of PEG-mediated protoplast transformation in the microalga Haematococcus pluvialis

Genetic manipulation of Haematococcus pluvialis is difficult because of the lack of a stable and convenient transformation system. The pH124-EGFP-Ble vector containing ble as a selective gene and EGFP as a reporter gene was constructed and employed for effective transformation. H. pluvialis protoplasts were obtained by treating with cellulase and macerozeme. Then polyethylene glycol-mediated transformation was established by incubating the protoplast with the vector. To improve the transformation efficiency of H. pluvialis protoplasts, the transformation system was optimized in consideration of different influencing factors, including zeomycin concentration, growth stage, amount of transformed vector, linearization of the vector, and duration of low-intensity illumination. The integration and expression of ble and EGFP was confirmed in the transformants. Moreover, the optimal combination for protoplast transformation of H. pluvialis was determined to be 5 µg of the linearized vector used to transform cells in the log growth phase, and then the transformed protoplasts allowed to recover under low-intensity illumination for 6 h. This study represents and describes the successful development of an H. pluvialis transformation protocol using protoplasts, which will enable convenient genetic manipulation of this important algal species.

Establishment of an Efficient Polyethylene Glycol (PEG)-Mediated Transformation System in Pleurotus eryngii var. ferulae Using Comprehensive Optimization and Multiple Endogenous Promoters

Pleurotus eryngii var. ferulae, a fungus of the genus Pleurotus, efficiently degrades lignin, especially during co-cultivation with other fungi. However, low transformation efficiency and heterologous gene expression restrict systematic studies of the molecular mechanisms and metabolic control of natural products in this mushroom. In this study, the homologous resistance marker carboxin (cbx) was used to establish a polyethylene glycol-mediated transformation (PMT) system in P. eryngii var. ferulae. Optimization of the transformation process greatly improved the number of positive transformants. In particular, we optimized: (i) protoplast preparation and regeneration; (ii) screening methods; and (iii) transformation-promoting factors. The optimized transformation efficiency reached 72.7 CFU/μg, which is higher than the average level of Pleurotus sp. (10–40 CFU/μg). Moreover, three endogenous promoters (Ppfgpd1, Ppfgpd2, and Ppfsar1) were screened and evaluated for different transcription initiation characteristics. A controllable overexpression system was established using these three promoters that satisfied various heterologous gene expression requirements, such as strong or weak, varied, or stable expression levels. This study lays the foundation for recombinant protein expression in P. eryngii var. ferulae and provides a method to investigate the underlying molecular mechanisms and secondary metabolic pathway modifications.

Preparation of Cas9 Ribonucleoproteins for Genome Editing.

Genome editing by the delivery of pre-assembled Cas9 ribonucleoproteins (Cas9 RNP) is an increasingly popular approach for cell types that are difficult to manipulate genetically by the conventional plasmid and viral methods. Cas9 RNP editing is robust, precise, capable of multiplexing, and free of genetic materials. Its transient presence in cells limits residual editing activity. This protocol describes the preparation of recombinant Streptococcus pyogenes Cas9 (SpCas9) protein by heterologous expression and purification from Escherichia coli, and the synthesis of CRISPR guide RNA by in vitro transcription and PAGE purification. SpCas9 is the first CRISPR Cas9 discovered ( Jinek et al., 2012 ) and is also one of the most characterized Cas enzymes for genome editing applications. Using this formulation of Cas9 RNP, we have demonstrated highly efficient genome editing in primary human T and natural killer (NK) cells by electroporation, and in fungi and plants by polyethylene glycol-mediated transformation. Our protocol of Cas9 RNP preparation is consistent and straightforward to adopt for genome editing in other cell types and organisms. Graphical abstract.

Optimization of Polyethylene Glycol-Mediated Transformation of the Pepper Anthracnose Pathogen Colletotrichum scovillei to Develop an Applied Genomics Approach.

Colletotrichum acutatum is a species complex responsible for anthracnose disease in a wide range of host plants. Strain C. acutatum KC05, which was previously isolated from an infected pepper in Gangwon Province of South Korea, was reidentified as C. scovillei using combined sequence analyses of multiple genes. As a prerequisite for understanding the pathogenic development of the pepper anthracnose pathogen, we optimized the transformation system of C. scovillei KC05. Protoplast generation from young hyphae of KC05 was optimal in an enzymatic digestion using a combined treatment of 2% lysing enzyme and 0.8% driselase in 1 M NH4Cl for 3 h incubation. Prolonged incubation for more than 3 h decreased protoplast yields. Protoplast growth of KC05 was completely inhibited for 4 days on regeneration media containing 200 μg/ml hygromycin B, indicating the viability of this antibiotic as a selection marker. To evaluate transformation efficiency, we tested polyethylene glycol-mediated protoplast transformation of KC05 using 19 different loci found throughout 10 (of 27) scaffolds, covering approximately 84.1% of the entire genome. PCR screening showed that the average transformation efficiency was about 17.1% per 100 colonies. Southern blot analyses revealed that at least one transformant per locus had single copy integration of PCR-screened positive transformants. Our results provide valuable information for a functional genomics approach to the pepper anthracnose pathogen C. scovillei.

Genetic Transformation and Green Fluorescent Protein Labeling in Ceratocystis paradoxa from Coconut.

Ceratocystis paradoxa, the causal agent of stem-bleeding disease of the coconut palm, causes great losses to the global coconut industry. As the mechanism of pathogenicity of C. paradoxa has not been determined, an exogenous gene marker was introduced into the fungus. In this study, pCT74-sGFP, which contains the green fluorescent protein (GFP) gene, and the hygromycin B resistance gene as a selective marker, was used as an expression vector. Several protoplast release buffers were compared to optimize protoplast preparation. The plasmid pCT74-sGFP was successfully transformed into the genome of C. paradoxa, which was verified using polymerase chain reaction and green fluorescence detection. The transformants did not exhibit any obvious differences from the wild-type isolates in terms of growth and morphological characteristics. Pathogenicity tests showed that the transformation process did not alter the virulence of the X-3314 C. paradoxa strain. This is the first report on the polyethylene glycol-mediated transformation of C. paradoxa carrying a ‘reporter’ gene GFP that was stably and efficiently expressed in the transformants. These findings provide a basis for future functional genomics studies of C. paradoxa and offer a novel opportunity to track the infection process of C. paradoxa.

Gentic overexpression increases production of hypocrellin A in Shiraia bambusicola S4201

Hypocrellin A (HA) is a perylenequinone (PQ) isolated from Shiraia bambusicola that shows antiviral and antitumor activities, but its application is limited by the low production from wild fruiting body. A gene overexpressing method was expected to augment the production rate of HA in S. bambusicola. However, the application of this molecular biology technology in S. bambusicola was impeded by a low genetic transformation efficiency and little genomic information. To enhance the plasmid transformant ratio, the Polyethylene Glycol-mediated transformation system was established and optimized. The following green fluorescent protein (GFP) analysis showed that the gene fusion expression system we constructed with a GAPDH promoter Pgpd1 and a rapid 2A peptide was successfully expressed in the S. bambusicola S4201 strain. We successfully obtained the HA high-producing strains by overexpressing O-methyltransferase/FAD-dependent monooxygenase gene (mono) and the hydroxylase gene (hyd), which were the essential genes involved in our putative HA biosynthetic pathway. The overexpression of these two genes increased the production of HA by about 200% and 100%, respectively. In general, this study will provide a basis to identify the genes involved in the hypocrellin A biosynthesis. This improved transformation method can also be used in genetic transformation studies of other fungi.

Efficient transformation of Pleurotus eryngii with a safe selective marker mutated from the Pesdi1 gene

We introduced a site-directed mutation in the sdi1 gene and used it as a selective marker for the polyethylene glycol-mediated transformation of Pleurotus eryngii monokaryon protoplasts. The transformants displayed obvious and stable resistance to the fungicide carboxin indicating that the mutant Pesdi1 gene is an efficient selective marker.

Optimization of Production Conditions for Protoplasts and Polyethylene Glycol-Mediated Transformation of Gaeumannomyces tritici.

Take-all, caused by Gaeumannomyces tritici, is one of the most important wheat root diseases worldwide, as it results in serious yield losses. In this study, G. tritici was transformed to express the hygromycin B phosphotransferase using a combined protoplast and polyethylene glycol (PEG)-mediated transformation technique. Based on a series of single-factor experimental results, three major factors—temperature, enzyme lysis time, and concentration of the lysing enzyme—were selected as the independent variables, which were optimized using the response surface methodology. A higher protoplast yield of 9.83 × 107 protoplasts/mL was observed, and the protoplast vitality was also high, reaching 96.27% after optimization. Protoplasts were isolated under the optimal conditions, with the highest transformation frequency (46–54 transformants/μg DNA). Polymerase chain reaction and Southern blotting detection indicated that the genes of hygromycin phosphotransferase were successfully inserted into the genome of G. tritici. An optimised PEG-mediated protoplast transformation system for G. tritici was established. The techniques and procedures described will lay the foundation for establishing a good mutation library of G. tritici and could be used to transform other fungi.

Engineering the Chloroplast Genome of Oleaginous Marine Microalga Nannochloropsis oceanica

Plastid engineering offers an important tool to fill the gap between the technical and the enormous potential of microalgal photosynthetic cell factory. However, to date, few reports on plastid engineering in industrial microalgae have been documented. This is largely due to the small cell sizes and complex cell-wall structures which make these species intractable to current plastid transformation methods (i.e., biolistic transformation and polyethylene glycol-mediated transformation). Here, employing the industrial oleaginous microalga Nannochloropsis oceanica as a model, an electroporation-mediated chloroplast transformation approach was established. Fluorescent microscopy and laser confocal scanning microscopy confirmed the expression of the green fluorescence protein, driven by the endogenous plastid promoter and terminator. Zeocin-resistance selection led to an acquisition of homoplasmic strains of which a stable and site-specific recombination within the chloroplast genome was revealed by sequencing and DNA gel blotting. This demonstration of electroporation-mediated chloroplast transformation opens many doors for plastid genome editing in industrial microalgae, particularly species of which the chloroplasts are recalcitrant to chemical and microparticle bombardment transformation.

Development of oriC-Based Plasmids for Mesoplasma florum.

The near-minimal bacterium Mesoplasma florum constitutes an attractive model for systems biology and for the development of a simplified cell chassis in synthetic biology. However, the lack of genetic engineering tools for this microorganism has limited our capacity to understand its basic biology and modify its genome. To address this issue, we have evaluated the susceptibility of M. florum to common antibiotics and developed the first generation of artificial plasmids able to replicate in this bacterium. Selected regions of the predicted M. florum chromosomal origin of replication (oriC) were used to create different plasmid versions that were tested for their transformation frequency and stability. Using polyethylene glycol-mediated transformation, we observed that plasmids harboring both rpmH-dnaA and dnaA-dnaN intergenic regions, interspaced or not with a copy of the dnaA gene, resulted in a frequency of ∼4.1 × 10-6 transformants per viable cell and were stably maintained throughout multiple generations. In contrast, plasmids containing only one M. florumoriC intergenic region or the heterologous oriC region of Mycoplasma capricolum, Mycoplasma mycoides, or Spiroplasma citri failed to produce any detectable transformants. We also developed alternative transformation procedures based on electroporation and conjugation from Escherichia coli, reaching frequencies up to 7.87 × 10-6 and 8.44 × 10-7 transformants per viable cell, respectively. Finally, we demonstrated the functionality of antibiotic resistance genes active against tetracycline, puromycin, and spectinomycin/streptomycin in M. florum Taken together, these valuable genetic tools will facilitate efforts toward building an M. florum-based near-minimal cellular chassis for synthetic biology.IMPORTANCEMesoplasma florum constitutes an attractive model for systems biology and for the development of a simplified cell chassis in synthetic biology. M. florum is closely related to the mycoides cluster of mycoplasmas, which has become a model for whole-genome cloning, genome transplantation, and genome minimization. However, M. florum shows higher growth rates than other Mollicutes, has no known pathogenic potential, and possesses a significantly smaller genome that positions this species among some of the simplest free-living organisms. So far, the lack of genetic engineering tools has limited our capacity to understand the basic biology of M. florum in order to modify its genome. To address this issue, we have evaluated the susceptibility of M. florum to common antibiotics and developed the first artificial plasmids and transformation methods for this bacterium. This represents a strong basis for ongoing genome engineering efforts using this near-minimal microorganism.

Polyethylene Glycol-mediated Transformation of Drechmeria coniospora.

Drechmeria coniospora is a nematophagous fungus and potential biocontrol agent. It belongs to the Ascomycota. It is related to Hirsutella minnesotensis, another nematophagous fungus but, phylogenetically, it is currently closest to the truffle parasite Tolypocladium ophioglossoides. Together with its natural host, Caenorhabditis elegans, it is used to study host-pathogen interactions. Here, we report a polyethylene glycol-mediated transformation method ( Turgeon et al., 2010 ; Ochman et al., 1988 ) for this fungus. The protocol can be used to generate both knock-in or knock-out strains ( Lebrigand et al., 2016 ).

An efficient polyethylene glycol-mediated transformation system of lentiviral vector in Shiraia bambusicola

Shiraia bambusicola can biosynthesize the valuable hypocrellin, which is applied in antibacterial, antitumoral, and antiviral fields. The lack of an effective transformation system limits studies on the hypocrellin metabolism deconstruction. We successfully expressed a lentiviral PgfpHyg vector in the Shiraia sp. SUPER-H168 by a polyethylene glycol and CaCl2 transformation method. The transformant was resistant to 500μg/mL of hygromycin B and represented by a green fluorescent signal in a fluorescent microscopy. We also overexpressed a multicopper oxidase (MCO) from the gene cluster of hypocrellin biosynthesis. MCO overexpression clearly enhanced hypocrellin production by about five times than the control strain, by improving the transcriptional levels of several hypocrellin metabolic genes. These genes included polyketide synthase, FAD/FMN-dependent oxidoreductase, monooxygenase, and O-methyltransferase. The increase of hypocrellin yield can efficiently solve the problem of its shortage from natural extraction. In summary, the polyethylene glycol and CaCl2 regulation transformation was successfully applied in S. bambusicola with a lentiviral vector, which is mainly used in mammal cells. This study will lay a foundation for decoding hypocrellin metabolic pathway by further protein expression, bioconversion, and gene targeting. It will also create a new possibility for gene expression or further gene targeting of other wild filamentous fungi.

Generating Targeted Gene Knockout Lines in Physcomitrella patens to Study Evolution of Stress-Responsive Mechanisms.

The moss Physcomitrella patens possesses highly efficient homologous recombination allowing targeted gene manipulations and displays many features of the early land plants including high tolerance to abiotic stresses. It is therefore an invaluable model organism for studies of gene functions and comparative studies of evolution of stress responses in plants. Here, we describe a method for generating targeted gene knockout lines in P. patens using a polyethylene glycol-mediated transformation of protoplasts including basic in vitro growth, propagation, and maintenance techniques.

English

Verticillium dahliae is a causal agent of vascular wilt smoke-tree Cotinus coggygrial. The genetic transformation of V. dahliae has been carried out by Agrobacterium and polyethylene glycol-mediated transformation. Due to technical simplicity and efficiency, PEG-mediated transformation is the most commonly used method for genetic transformation in filamentous fungi. However, polyethylene glycol (PEG)-mediated transformation is still deficient in V. dahliae. In this study, we studied the main factors affecting the release of protoplasts from mycelia of V. dahliae such as lytic enzymes, enzymolysis buffers and incubation time. The optimal combination for protoplast preparation from smoke-tree wilt fungus V. dahliae can release 2.8 × 106 protoplasts/ml from fresh mycelia of smoke-tree wilt fungus. The majority of spheroplast contained nuclei and well regenerated. After PEG mediated transformation, green fluorescent protein (GFP) expressing V. dahliae strains were obtained. Therefore, this study provides a protocol suitable for protoplast preparation and transformation of smoke-tree wilt fungusV. dahliae.   Key words: Verticillium dahliae, smoke-tree wilt, protoplast preparation, polyethylene glycol (PEG) transformation

Canthaxanthin production with modified Mucor circinelloides strains

Canthaxanthin is a natural diketo derivative of β-carotene primarily used by the food and feed industries. Mucor circinelloides is a β-carotene-accumulating zygomycete fungus and one of the model organisms to study the carotenoid biosynthesis in fungi. In this study, the β-carotene ketolase gene (crtW) of the marine bacterium Paracoccus sp. N81106 fused with fungal promoter and terminator regions was integrated into the M. circinelloides genome to construct stable canthaxanthin-producing strains. Different transformation methods including polyethylene glycol-mediated transformation with linear DNA fragments, restriction enzyme-mediated integration and Agrobacterium tumefaciens-mediated transformation were tested to integrate the crtW gene into the Mucor genome. Mitotic stability, site of integration and copy number of the transferred genes were analysed in the transformants, and several stable strains containing the crtW gene in high copy number were isolated. Carotenoid composition of selected transformants and effect of culturing conditions, such as temperature, carbon sources and application of certain additives in the culturing media, on their carotenoid content were analysed. Canthaxanthin-producing transformants were able to survive at higher growth temperature than the untransformed strain, maybe due to the effect of canthaxanthin on the membrane fluidity and integrity. With the application of glucose, trehalose, dihydroxyacetone and L-aspartic acid as sole carbon sources in minimal medium, the crtW-expressing M. circinelloides strain, MS12+pCA8lf/1, produced more than 200 μg/g (dry mass) of canthaxanthin.

Polyethylene glycol-mediated transformation of fused egfp-hph gene under the control of gpd promoter in Pleurotus eryngii

Pleurotus eryngii was transformed using a polyethylene glycol-mediated method. A plasmid, pEPUGH, containing a reporter gene (enhanced green fluorescent protein gene, egfp) and a positive selectable marker gene (hygromycin phosphotransferase gene, hph) was constructed. The fused egfp-hph gene was placed under the control of the strong and constitutive native gpd promoter from P. eryngii. The recombinant plasmid was used to transform of P. eryngii protoplasts. Successful transformation was demonstrated by molecular analyses. Moreover, the mycelia of the transformants showed green epipolic dispersion on fluorescence microscopy. About 90-210 transformants were produced per μg plasmid DNA per 10(7) viable protoplasts.

Transient silencing mediated by in vitro synthesized double-stranded RNA indicates that PsCdc14 is required for sporangial development in a soybean root rot pathogen

In many eukaryotic organisms, Cdc14 phosphatase regulates multiple biological events during anaphase and is essential for mitosis. It has been shown that Cdc14 is required for sporulation in the potato blight pathogen Phytophthora infestans; however, the role that the Cdc14 homolog (PsCdc14) plays in the soil-borne soybean root rot pathogen P. sojae remains ambiguous. PsCdc14 is highly expressed in sporulation, zoospore, and cyst life stages, but not in vegetative mycelia and infection stages, suggesting that it contributes to asexual reproduction and thus the spread of the disease. Double-stranded RNA (dsRNA) mediates gene silencing, a post-transcriptional and highly conserved process in eukaryotes, involving specific gene silencing through degradation of target mRNA. We combined in vitro dsRNA synthesis and a polyethylene glycol-mediated transformation system to construct a dsRNA-mediated transient gene silencing system; and then performed a functional analysis of PsCdc14 in P. sojae. PsCdc14 mRNA was dramatically reduced in transformants after protoplasts were exposed in in vitro synthesized PsCdc14 dsRNA, resulting in low sporangial production and abnormal development in P. sojae silencing lines. Furthermore, dsRNA-mediated transient gene silencing could enable elucidation of P. sojae rapid gene function, facilitating our understanding of the development and pathogenicity mechanisms of this oomycete fungus.

Differential Regulation of Serine Acetyltransferase Is Involved in Nickel Hyperaccumulation in Thlaspi goesingense

When growing in its native habitat, Thlaspi goesingense can hyperaccumulate 1.2% of its shoot dry weight as nickel. We reported previously that both constitutively elevated activity of serine acetyltransferase (SAT) and concentration of glutathione (GSH) are involved in the ability of T. goesingense to tolerate nickel. A feature of SAT is its feedback inhibition by l-cysteine. To understand the role of this regulation of SAT by Cys on GSH-mediated nickel tolerance in T. goesingense, we characterized the enzymatic properties of SATs from T. goesingense. We demonstrate that all three isoforms of SAT in T. goesingense are insensitive to inhibition by Cys. Further, two amino acids (proline and alanine) in the C-terminal region of the cytosolic SAT (SAT-c) from T. goesingense are responsible for converting the enzyme from a Cys-sensitive to a Cys-insensitive form. Furthermore, the Cys-insensitive isoform of SAT-c confers elevated resistance to nickel when expressed in Escherichia coli and Arabidopsis thaliana, supporting a role for altered regulation of SAT by Cys in nickel tolerance in T. goesingense.

Transient gene suppression in a red alga, Cyanidioschyzon merolae 10D

Antisense suppression is a powerful tool to analyze gene function. In this study, we show that antisense RNA suppressed the expression of a target gene in the unicellular red alga, Cyanidioschyzon merolae. In this study, the antisense strand of the catalase gene was cloned and inserted into an expression vector upstream of the GFP gene. This plasmid was introduced into C. merolae cells using a polyethylene glycol-mediated transformation protocol. Using the expression of GFP as a marker of transformed cells, the expression of catalase was examined by immunocytochemistry. Decreased expression of catalase was observed in cells that were transformed with the antisense strand of the catalase gene. These results indicate the utility of this antisense suppression system.

A highly efficient polyethylene glycol-mediated transformation method for mushrooms

A highly efficient transformation system mediated by polyethylene glycol was developed for the cultivated mushroom Pleurotus ostreatus. Eighty to 180 integrative and stable-resistant colonies appeared per mug of DNA per 10(7) viable protoplasts in a transformation experiment with the hygromycin B phosphotransferase gene (hph), which is about 40-1800 times higher than that previously reported in P. ostreatus. One hundred to 150 transformants emitting green fluorescence were observed per mug of DNA per 10(7) viable protoplasts in a transformation with the green fluorescent protein gene, but green fluorescence disappeared 30 h after transformation, suggesting that the green fluorescent protein gene was only transiently expressed in P. ostreatus. Plasmid pAN7-1 was also transferred into two important cultivated mushrooms, Ganoderma lucidum and Lentinus edodes, and 120-150 and 85-100 transformants per mug of DNA per 10(7) viable protoplasts were obtained, respectively, which is seven to 38 times and 24-28 times greater than previously reported. These data indicate that this new polyethylene glycol-mediated transformation procedure is highly efficient for mushrooms, and could be a useful tool in mushroom improvement by gene engineering.