Polyethylene Glycol Compounds Research Articles

Quantitation of polyethylene glycol by size exclusion chromatography with charged aerosol, differential refractive index, and multi-angle light scattering detectors

Polyethylene glycol (PEG) has found tremendous applications in pharmaceutical products and has played a critical role in PEGylated drug modalities to improve pharmacokinetic properties and biological efficacy. The characterization and quantitation of PEGs are essential to control manufacture process and drug product quality. However, the assay value of PEG could change dramatically depending on the structures of the PEG and the detection techniques used. In this study, we developed a size exclusion chromatographic (SEC) method for quantitative PEG analysis, and we systematically evaluated the performance of three online detectors with different operating principles: a charged aerosol detector (CAD), a differential refractive index (dRI) detector, and a multi-angle light scattering detector (MALS). Fourteen PEG compounds covering a wide range of molecular weight (MW, 1 – 40 kDa) and molecular architectures (linear, branched, Y-shaped and multi-arm geometries) were evaluated by these three detection techniques. Our study revealed that the dRI showed the most universal responses among all the PEGs regardless of their molecular weight or geometries. In the contrast, CAD and MALS detector showed MW-dependent and semi-universal geometry-dependent responses. Another key finding is that the relative response factor for each multi-arm PEG in the CAD and the MALS were inversely correlated, suggesting both can be applied to qualitatively assess polymers of different architectures, including the ones with subtle differences in their core structures. The comparison of the three detectors not only provides the fundamental and comprehensive understanding of PEG quantitation but also enables the process development and control of high-quality PEGs in producing PEGylated therapeutics in the pharmaceutical industry.

Investigation of anti-PEG antibody response to PEG-containing cosmetic products in mice

Polyethylene glycol (PEG), a polyether compound, is available in molecular weights from ∼300g/mol to ∼10,000,000g/mol. In the molecular weight range of ∼750 to ∼5000, PEG is commonly used in bioconjugation technology and nano-formulations to improve the circulation half-life of the formulations and increase their stability. In cosmetics, lower molecular weight PEG compounds such as PEG 60 or PEG 100 are widely used as emulsifiers and skin penetration enhancers. PEG polymers are generally recognized as biologically inert and non-immunogenic. However, it is recently reported that the "pre-existing" anti-PEG antibodies have been detected in high percentages of healthy individuals who have never received treatment with parenteral PEGylated formulations. To the best of our knowledge, we are the first to attempt to find an explanation for the source of pre-existing anti-PEG antibodies in healthy individuals. In a murine study, we demonstrated that topically applied PEG derivatives, present in two commercially available cosmetic products, could efficiently penetrate the stratum corneum and reach the systemic circulation. The skin penetration of PEG derivatives was further enhanced in injured or otherwise compromised skin. Daily application of cosmetic PEG derivatives primed the immune system, inducing anti-PEG IgM production. Anti-PEG IgM was detected by Day 14 in mice with normal skin, while anti-PEG IgM was detected as early as day 7 in mice with compromised skin. In addition, in mice with pre-induced circulating levels of anti-PEG IgM, topically applied PEG derivatives from cosmetic products appeared to bind to the pre-induced anti-PEG IgM, lowering blood levels. Current results indicate that PEG derivatives in cosmetic products may be an important contributor to the source of the "pre-existing" anti-PEG antibodies that have been detected in healthy individuals.

Plastic and Placenta: Identification of Polyethylene Glycol (PEG) Compounds in the Human Placenta by HPLC-MS/MS System.

The placenta is a crucial interface between the fetus and the maternal environment. It allows for nutrient absorption, thermal regulation, waste elimination, and gas exchange through the mother's blood supply. Furthermore, the placenta determines important adjustments and epigenetic modifications that can change the phenotypic expression of the individual even long after birth. Polyethylene glycol (PEG) is a polyether compound derived from petroleum with many applications, from medicine to industrial manufacturing. In this study, for the first time, an integration of ultra-high-performance liquid chromatography (UHPLC) coupled with mass spectrometry (MS) was used to detect suites of PEG compounds in human placenta samples, collected from 12 placentas, originating from physiological pregnancy. In 10 placentas, we identified fragments of PEG in both chorioamniotic membranes and placental cotyledons, for a total of 36 samples.

Complexation of Polyethyleneglycol Containing Small Molecules with Magnesium Chloride as a Purification and Isolation Strategy

Polyethyleneglycol (PEG) containing compounds are often non-crystalline, gel-like oils, which pose great challenges for handling, purification, and isolation, particularly on large scales. To overcome these isolation challenges, a new procedure has been established, which is based on the discovery that complexation with magnesium chloride (MgCl2) can transform these oily intermediates into solid complexes. This method significantly improves the handling of PEG compounds and leads a more process-friendly isolation for larger scale handling. Often, the resulting PEG–MgCl2 complexes could be used directly in subsequent transformations, such as a peptide coupling. Alternately, the inorganic Mg salt used in these weakly bonded complexes can be readily dissociated and removed from the desired PEG derivatives.

Preoperative mechanical large bowel preparation in colorectal cancer surgery

Objective: to analyze literature data on the effectiveness of preoperative mechanical bowel preparation (MBP), and on the basis of our own data to perform a comparative analysis of immediate MBP results in patients operated on right-sided colon cancer.Materials and methods. We reviewed literature data relevant to the use of MBP and performed a retrospective analysis of the immediate results of surgical interventions on right-sided colon cancer in 349 patients having undergone MBP with polyethylene glycol (PEG) compounds (n = 186) and without the use of PEG (n = 163).Results. The incidence rates of complications in the patients of groups I and II were 6.7 % and 9.8 % (P>0.05), anastomotic leak rates were 0.6 % and 1.6 % (P>0.05), postoperative death rates — 1.2 % and 1.6 % (P>0.05), the average durations of the postoperative period were 14.9 and 12.1 days, respectively (P>0.05).Conclusion. The use of preoperative MBP with PEG compounds does not result in enhancing the immediate results of the surgical treatment of patients with right-sided cancer.

Voltammetric determination of alpha lipoic acid using chitosan-based polyurethane membrane electrode

In this study, chitosan-based polyurethane (PU) membrane modified electrodes were prepared for sensitive, practical and fast measurement of α-lipoic acid (ALA), which is an important biomolecule. PU membranes were synthesized using hexamethylene diisocyanate, chitosan, caffeic acid and polyethylene glycol compounds. Chemical structure, thermal stability and morphological properties of the prepared PU membranes were determined with different instrumental techniques. Surface morphology, wettability and hydrophilicity of synthesized chitosan-based PU membranes were investigated. Gold electrode was modified by these PU membranes with different film thicknesses. The bare and PU membrane coated electrodes were used for deduction of ALA by cyclic voltammetry, differential pulse voltammetry and amperometry techniques. In addition, sensitivity, linearity, repeatability and deduction limit of PU modified electrodes were investigated. Modified electrodes showed wide linear detection range (5–200 µmolL−1), low detection limit (4.931 µmolL-1) and short response time. Results show that polyurethane modified electrodes are good alternative for ALA determination.

Tilianin-loaded Reactive Oxygen Species-Scavenging Nano-Micelles Protect H9c2 Cardiomyocyte Against Hypoxia/Reoxygenation-Induced Injury.

Previous studies have shown that tilianin alleviates ischemia-reperfusion-induced cardiomyocyte injury. However, its clinical translation has been hampered because of its insolubility in water. Tilianin-based nano-micelles that may overcome this critical issue are presented. A polyethylene glycol compound was covalently attached to propylene sulfide-formed amphiphilic diblock polymers. In the aqueous solution, tilianin is encapsulated in a hydrophobic shell to form nano-micelles. The Ph-PPS-PEG self-assembled into nanoscale micelles with a size of approximately 70 nm, termed "tilianin-loaded micelles" (TLMs). TLMs are highly efficient hydrogen peroxide scavengers and the activity of caspase-3 inhibition, thereby protecting cells from H/R-induced cytotoxicity. In addition, TLMs decreased levels of MDA, IL-1 and tumor necrosis factor (TNF-α), inhibited apoptosis, TLR4 and nuclear transcription factor (NF-κB p65) protein expression in hypoxia-reoxygenation (H/R) model. Taken together, the study suggests that TLMs may be of clinical value for the protective effects of cardiomyocytes by inhibiting Inflammation and oxidative stress during myocardial ischemia-reperfusion injury.

Effect of a novel polyethylene glycol compound on lung lavage in dogs after the inhalation of depleted uranium dust

Purpose: The purpose of this study was to assess the effect of a lavage solution containing methoxypolyethylene glycol 4-(3,4-dihydroxyphenethylamino)-4-oxobutanoate (MDO) for whole lung lavage (WLL) in dogs after the inhalation of depleted uranium (DU) dust at a dose of 30 mgUkg−1.Materials and methods: WLL was performed using lavage solutions made of normal saline (saline group) or normal saline plus MDO (MDO group) at 2 days post-DU exposure. Meanwhile, a control group was set up without any treatment.Results: At 10 days post-DU exposure, the saline and MDO groups had a lower DU content in urine and lung compared with the DU group (without lavage), while the MDO group content was significantly lower than that in the saline group. In terms of blood urea nitrogen and creatinine levels, the DU group maintained relatively high levels from day 3 to day 10; the saline group levels were reduced compared with the DU group at day 8 and day 10, while the MDO group levels remained markedly lower than both the DU and saline group levels. Pathological changes in the lungs and kidneys showed that the saline group was improved compared with the DU group, but not as significantly as the MDO group.Conclusions: In brief, WLL has a remarkable effect in promoting the decorporation of inhaled DU dust in the lungs of dogs. By comparison, a MDO-containing lavage solution has a better lavage effect than normal saline.

De Novo Synthesis of Phosphorylated Triblock Copolymers with Pathogen Virulence-Suppressing Properties That Prevent Infection-Related Mortality.

Phosphate is a key and universal "cue" in response to which bacteria either enhance their virulence when local phosphate is scarce or downregulate it when phosphate is adundant. Phosphate becomes depleted in the mammalian gut following physiologic stress and serves as a major trigger for colonizing bacteria to express virulence. This process cannot be reversed with oral supplementation of inorganic phosphate because it is nearly completely absorbed in the proximal small intestine. In the present study, we describe the de novo synthesis of phosphorylated polyethylene glycol compounds with three defined ABA (hydrophilic/-phobic/-philic) structures, ABA-PEG10k-Pi10, ABA-PEG16k-Pi14, and ABA-PEG20k-Pi20, and linear polymer PEG20k-Pi20 absent of the hydrophobic block. The 10k, 16k, and 20k demonstrate the molecular weights of the poly(ethylene glycol) block, and Pi10, Pi14, and Pi20 represent the repeating units of phosphate. Polymers were tested for their efficacy against Pseudomonas aeruginosa virulence in vitro and in vivo by assessing the expression of the phosphate sensing protein PstS, the production of key virulence factor pyocyanin, and Caenorhabditis elegans killing assays. Results indicate that all phosphorylated polymers suppressed phosphate sensing, virulence expression, and lethality in P. aeruginosa. Among all of the phosphorylated polymers, ABA-PEG20k-Pi20 displayed the greatest degree of protection against P. aeruginosa. To define the role of the hydrophobic core in ABA-PEG20k-Pi20 in the above response, we synthesized PEG20k-Pi20 in which the hydrophobic core is absent. Results indicate that the hypdrophobic core of ABA-PEG20k-Pi20 is a key structure in its protective effect against P. aeruginosa, in part due to its ability to coat the surface of bacteria. Taken together, the synthesis of novel polymers with defined structures and levels of phosphorylation may elucidate their antivirulence action against clinically important and lethal pathogens such as P. aeruginosa.

Polyethylene glycol compounds for functional hydraulic fluids

New compounds of phthalate; -phosphate, -borate, -phosphate-borate; polyethylene glycol and 2-(2-butoxy ethoxy ethanol) were synthesized, with the aim of producing new high performance functional hydraulic fluids. The synthesis process involves two stages: first, the synthesis of base compounds which are products of the reactions of phthalic acid anhydride, polyethylene glycol and acid [phosphoric, boric, phosphoric-boric and/or phthalic]. Then, the reaction of phthalic acid with 2-(2-butoxy ethoxy) ethanol. The base compounds so prepared, together with diluents and additives were formulated for the second stage of the synthesis process. The effectiveness of standard specification tests was investigated. Property improvement may be attained by the incorporation of phthalic acid anhydride in the reaction. Our new functional hydraulic fluids can be produced more economically and can monitor any pollution caused by fluid operations in the petroleum industry.

Bilirubin Nanoparticles as a Nanomedicine for Anti‐inflammation Therapy

AbstractDespite the high potency of bilirubin as an endogenous anti‐inflammatory compound, its clinical translation has been hampered because of its insolubility in water. Bilirubin‐based nanoparticles that may overcome this critical issue are presented. A polyethylene glycol compound (PEG) was covalently attached to bilirubin, yielding PEGylated bilirubin (PEG‐BR). The PEG‐BR self‐assembled into nanoscale particles with a size of approximately 110 nm, termed bilirubin nanoparticles (BRNPs). BRNPs are highly efficient hydrogen peroxide scavengers, thereby protecting cells from H2O2‐induced cytotoxicity. In a murine model of ulcerative colitis, intravenous injection of BRNPs showed preferential accumulation of nanoparticles at the sites of inflammation and significantly inhibited the progression of acute inflammation in the colon. Taken together, BRNPs show potential for use as a therapeutic nanomedicine in various inflammatory diseases.

Bilirubin Nanoparticles as a Nanomedicine for Anti-inflammation Therapy.

Despite the high potency of bilirubin as an endogenous anti-inflammatory compound, its clinical translation has been hampered because of its insolubility in water. Bilirubin-based nanoparticles that may overcome this critical issue are presented. A polyethylene glycol compound (PEG) was covalently attached to bilirubin, yielding PEGylated bilirubin (PEG-BR). The PEG-BR self-assembled into nanoscale particles with a size of approximately 110 nm, termed bilirubin nanoparticles (BRNPs). BRNPs are highly efficient hydrogen peroxide scavengers, thereby protecting cells from H2 O2 -induced cytotoxicity. In a murine model of ulcerative colitis, intravenous injection of BRNPs showed preferential accumulation of nanoparticles at the sites of inflammation and significantly inhibited the progression of acute inflammation in the colon. Taken together, BRNPs show potential for use as a therapeutic nanomedicine in various inflammatory diseases.

Improvement of POCIS ability to quantify pesticides in natural water by reducing polyethylene glycol matrix effects from polyethersulfone membranes

The presence of polyethylene glycol compounds (PEG) in extracts from polar organic chemical integrative samplers (POCIS) was shown by high resolution time-of-flight mass spectrometry. PEG compounds, which are released by polyethersulfone (PES) membranes used to build POCIS, can induce matrix effects during quantification of performance reference compounds (PRC, DIA-d5) and target pesticides by mass detection, even after chromatographic separation. Dilution of POCIS extracts can reduce this matrix effect, but dilution may induce a decrease in POCIS performance, primarily for quantification limits. To reduce PEG interference during chromatographic analysis, a simple non-damaging washing protocol for PES membranes is proposed. The method consists of 2 successive baths of washing solution (140mL per membrane) of ultrapure water (UPW) and methanol (50/50), stirred at 300 rotations per minute (rpm), followed by a final membrane rinse with UPW (140mL). The signal from PEG compounds was significantly decreased for washed membranes (between 4 and 6 fold lower). After field deployment, total ion current chromatograms of extracts from POCIS built with washed PES membranes did not display a significant PEG fingerprint. This led to improved quantification accuracy for compounds co-eluting with PEG, i.e. PRC (performance and reference compound, DIA-d5) and some pesticides and metabolites. With washed membranes, an accurate quantification of PRC and pesticides sampled by POCIS was indeed possible without a large extract dilution; 10 times instead of the 25 times needed in unwashed conditions. Assuming that the PRC approach corrects for environmental conditions and sampling rates (Rs), a proper PRC (DIA-d5) quantification significantly improved pesticide time weighted average concentration (TWAC) determination in natural water after field deployment.

Single molecular weight discrete PEG compounds: emerging roles in molecular diagnostics, imaging and therapeutics

PEGylation is the process of covalently attaching polyethylene glycol (PEG) chains to various biomolecules, such as oligonucleotides, peptides, proteins and antibody fragments. The PEGylation proce...

Tamoxifen loaded folic acid armed PEGylated magnetic nanoparticles for targeted imaging and therapy of cancer

Magnetic nanoparticles (MNPs) have been widely used as drug delivery nanosystems and contrast agent for imaging and detection. To engineer multifunctional nanomedicines for simultaneous imaging and therapy of cancer cells, in the current study, we synthesized tamoxifen (TMX) loaded folic acid (FA) armed MNPs to target the folate receptor (FR) positive cancer cells. To this end, Fe3O4 nanoparticles (NPs) were synthesized through thermal decomposition of Fe(acac)3. Polyethylene glycol (PEG) was treated with excess bromoacetyl chloride (BrAc) and then with 3-aminopropyltriethoxysilane (APS) to synthesize bromoacetyl-terminal polyethylene glycol silane (APS-PEG-BrAc). The latter complex was treated with protected ethylene diamine to form a bifunctional PEG compound containing triethoxysilane at one end and amino group at the other end (APS-PEG-NH2). The Fe3O4-APS-PEG-NH2 NPs were prepared through self-assembly of APS-PEG-NH2 on MNPs, while the amino groups at the end of Fe3O4-APS-PEG-NH2 were conjugated with folic acid (FA), then loaded with TMX (Fe3O4-APS-PEG-FA-TMX). The average size of “Fe3O4-APS-PEG-FA-TMX” NPs was approximately 40nm. The engineered MNPs were further characterized and examined in the human breast cancer MCF-7 cells that express FR. The TMX loaded MNPs (with loading efficiency of 49.1%) showed sustained liberation of TMX molecules (with 90% release in 72h). Fluorescence microcopy and flow cytometry analyses revealed substantial interaction of Fe3O4-APS-PEG-FA-TMX NPs with the FR-positive MCF-7 cells. Cytotoxicity analysis resulted in significant growth inhibition in MCF-7 cells treated with Fe3O4-APS-PEG-FA-TMX NPs. Based on these findings, the TMX-loaded FA-armed PEGylated MNPs as a novel multifunctional nanomedicine/theranostic for concurrent targeting, imaging and therapy of the FR-positive cancer cells.

Novel Photodynamic Therapy Using Water‐dispersed TiO2–Polyethylene Glycol Compound: Evaluation of Antitumor Effect on Glioma Cells and Spheroids In Vitro

Titanium dioxide (TiO(2)) is thought to be a photocatalytic agent excited by UV light. Our aim was to investigate the photocatalytic antitumor effect of water-dispersed TiO(2) nanoparticles on C6 rat glioma cells and to evaluate the treatment responses by the spheroid models. Water-dispersed TiO(2) nanoparticles were constructed by the adsorption of chemical modified polyethylene glycol (PEG) on the TiO(2) surface (TiO(2)/PEG). Each monolayer and spheroid of C6 cells was coincubated with various concentrations of TiO(2)/PEG and subsequently irradiated with UV light. Damage of the cells and spheroids was evaluated sequentially by staining with the fluorescent dyes. The cytotoxic effect was correlated with the concentration of TiO(2)/PEG and the energy dose of UV irradiation. More than 90% of cells were killed after 13.5 J cm(-2) of UV irradiation in the presence of 500 microg mL(-1) TiO(2)/PEG. The irradiated spheroids in the presence of TiO(2)/PEG showed growth suppression compared with control groups. In TiO(2)/PEG-treated spheroids, the number of Annexin V-FITC-stained cells gradually increased during the first 6 h, and subsequently propidium iodide-stained cells appeared. The results of this study suggest that newly developed photoexcited TiO(2)/PEG have antitumoral activity. Photodynamic therapy utilizing this material can be a clue to a novel therapeutic strategy for glioma.

Investigation of a 2-step agglomeration process performed in a rotary processor using polyethylene glycol solutions as the primary binder liquid

The purpose of this research was to investigate the use of polyethylene glycol (PEG) solutions as the primary binder liquid in a 2-step agglomeration process performed in a rotary processor and characterize the resulting granules and their tableting characteristics. This was done by granulation of binary mixtures of microcrystalline cellulose (MCC) and either lactose, calcium phosphate, acetaminophen, or theophylline, in a 1:3 ratio, using a 50% (wt/wt) aqueous solution of PEG and water as the binder liquid. Formulations containing lactose were agglomerated using 5 different amounts of the PEG binder solution, giving rise to a PEG content in the range of 6% to 43% (wt/wt). The process outcome was characterized according to adhesion, yield, and water requirement, and the prepared granules were characterized according to size, size distribution, and flow properties as well as tableting properties. The agglomeration of all mixtures resulted in high yields of free-flowing agglomerates and gave rise to good reproducibility of the investigated agglomerate characteristics. The process allowed for the incorporation of 42.5% (wt/wt) PEG, which is higher than the percentage of PEG reported for other equipment. Tablets of sufficient strength could be prepared with all investigated excipients using 20% wt/wt PEG; higher PEG contents gave rise to adhesion and prolonged disintegration. In conclusion, agglomeration in a torque-controlled rotary processor using solutions of PEG as the primary binder liquid was found to be a robust process, suitable for the incorporation of high contents of PEG and/or drug compounds.

Extreme hemodilution with PEG-hemoglobin vs. PEG-albumin

Isovolemic hemodilution to 11% systemic hematocrit was performed in the hamster window chamber model using 6% dextran 70 kDa (Dx 70) and 5% human serum albumin (HSA). Systemic and microvascular effects of these solutions were compared with polyethylene glycol (PEG)-conjugated 5% albumin (MPA) and PEG-conjugated 4.2% Hb (MP4). These studies were performed for the purpose of comparing systemic and microvascular responses of PEG vs. non-PEG plasma expanders and similar oxygen-carrying vs. noncarrying blood replacement fluids. Mean arterial blood pressure was statistically significantly reduced for all groups compared with baseline (P < 0.05), HSA, MPA, and MP4 higher than Dx 70 (P < 0.05). MP4 and MPA had a significantly higher cardiac index than HSA and Dx 70, in addition to a positive base excess. Microvascular blood flow and capillary perfusion were significantly higher for the PEG compounds compared with HSA and Dx 70. Intravascular PO2 for MP4 and MPA was higher in arterioles (P < 0.05) compared with HSA and Dx 70, but there was no difference in either tissue or venular PO2 between groups. Total Hb in the MP4 group was 4.8 +/- 0.4 g/dl, whereas the remaining groups had a range of 3.6-3.8 g/dl. The hemodilution results showed that PEG compounds maintained microvascular conditions with lower concentrations than conventional plasma expanders. Furthermore, microvascular oxygen delivery and extraction in the window chamber tissue were significantly higher for the PEG compounds. MP4 was significantly higher than MPA (P < 0.05) and was not statistically different from baseline, an effect due to the additional oxygen release to the tissue by the Hb MP4.

High-molecular-weight polyethylene glycol prevents lethal sepsis due to intestinal Pseudomonas aeruginosa

Background & Aims : During stress, erosion of protective intestinal mucus occurs in association with adherence to and disruption of the intestinal epithelial barrier by invading opportunistic microbial pathogens. The aims of this study were to test the ability of a high-molecular-weight polyethylene glycol compound, polyethylene glycol 15–20, to protect the intestinal epithelium against microbial invasion during stress. Methods : The ability of polyethylene glycol 15–20 to protect the intestinal epithelium against the opportunistic pathogen Pseudomonas aeruginosa was tested in cultured Caco-2 cells. Bacterial virulence gene expression, bacterial adherence, and transepithelial electrical resistance were examined in response to apical inoculation of P. aeruginosa onto Caco-2 cells. Complementary in vivo studies were performed in a murine model of lethal sepsis due to intestinal P. aeruginosa in which surgical stress (30% hepatectomy) was combined with direct inoculation of P. aeruginosa into the cecum. Results : High-molecular-weight polyethylene glycol (polyethylene glycol 15–20) conferred complete protection against the barrier-dysregulating effects of P. aeruginosa in Caco-2 cells. Intestinal application of polyethylene glycol 15–20 in stressed mice protected against the lethal effects of intestinal P. aeruginosa. Mechanisms of this effect seem to involve the ability of polyethylene glycol 15–20 to distance P. aeruginosa from the intestinal epithelium and render it completely insensate to key environmental stimuli that activate its virulence. Conclusions : High-molecular-weight polyethylene glycol has the potential to function as a surrogate mucin within the intestinal tract of a stressed host by inhibiting key interactive events between colonizing microbes and their epithelial cell targets.

Polyethylene glycol compounds for functional hydraulic fluids

New compounds of phthalate; -phosphate, -borate, -phosphate-borate; polyethylene glycol and 2-(2-butoxy ethoxy ethanol) were synthesized, with the aim of producing new high performance functional hydraulic fluids. The synthesis process involves two stages: first, the synthesis of base compounds which are products of the reactions of phthalic acid anhydride, polyethylene glycol and acid [phosphoric, boric, phosphoric-boric and/or phthalic]. Then, the reaction of phthalic acid with 2-(2-butoxy ethoxy) ethanol. The base compounds so prepared, together with diluents and additives were formulated for the second stage of the synthesis process. The effectiveness of standard specification tests was investigated. Property improvement may be attained by the incorporation of phthalic acid anhydride in the reaction. Our new functional hydraulic fluids can be produced more economically and can monitor any pollution caused by fluid operations in the petroleum industry.