Polyethylene Glycol Chain Length Research Articles

Sol-gel synthesized porous Yb-K2Ti6O13(n) for photocatalytic degradation of azophloxine: effect of polyethylene glycol chain length

Sol-gel synthesized porous Yb-K2Ti6O13(n) for photocatalytic degradation of azophloxine: effect of polyethylene glycol chain length

PEGylated AIEgens for dual sensing of ATP and H2S and cancer cells photodynamic therapy

Fluorescent sensors have been widely applied for biosensing, but probes for both multiple analytes sensing and photodynamic therapy (PDT) effect are less reported. In this article, we reported three AIE-based probes anchored with different mass-weight polyethylene glycol (PEG) tails, i.e., TPE-PEG160, TPE-PEG350, and TPE-PEG750, for both adenosine-5′-triphosphate (ATP) and hydrogen sulfide (H2S) detection and also cancer cells photodynamic therapy. TPE-PEGns (n = 160, 350 and 750) contain the tetraphenylethylene-based fluorophore core, the pyridinium and amide anion binding sites, the H2S cleavable disulfide bond, and the hydrophilic PEG chain. They exhibit a good amphiphilic property and can self-assemble nona-aggregation with a moderated red emission in an aqueous solution. Importantly, the size of aggregation, photophysical property, sensing ability and photosensitivity of these amphiphilic probes can be controlled by tuning the PEG chain length. Moreover, the selected probe TPE-PEG160 has been successfully used to detect environmental H2S and image ATP levels in living cells, and TPE-PEG750 has been used for photodynamic therapy of tumor cells under light irradiation.

Structure of polyethylene glycol/water mixtures as a separation medium of aqueous two-phase extraction systems studied by equilibrium analysis of thiocyanato complexation of Cobalt(II)

Aqueous two-phase systems (ATPS) utilizing polyethylene glycol (PEG) have been successfully used for the separation of various organic and inorganic compounds as an environmentally benign extraction method. However, a fundamental understanding of the role of the hydration structures around PEG chains in solute partitioning in ATPS remains elusive although it has been considered that PEG molecules are involved in separation. In the present work, the equilibria of Co(II) thiocyanate complexation reaction in aqueous PEG solutions were studied by spectrophotometry with varying ethylene oxide chain length and concentration of PEG. From the formation constants of the tetrahedral and octahedral Co(II) thiocyanate complexes obtained, a microheterogeneous structure consisting of pseudo phases formed by hydration of ethylene oxide (EO) chain and terminal hydroxyl (OH) groups in the PEG molecule in addition to the bulk water phase was estimated. It was revealed that the formation of tetrahedral Co(NCS)42− complex proceeds in the EO pseudo phase by the involvement of hydrophobic ethylene groups, while the OH phase and the bulk phase inhibit the progress of the reaction. This indicates that Co(NCS)42− is stable in hydrophobic hydration structure of water around the EO moiety. The EO phase imparts hydrophobicity to aqueous PEG solutions and plays a predominant role in partition of solute molecules in PEG-based ATPS.

The Influence of PEG Chain Length on the in vivo Tumor Accumulation of Self-assembled Amphiphilic Drug-PEG Polymeric Micelles

The integration of a drug and polyethylene glycol (PEG) into an amphiphilic polymer to form self-assembled micelles with high drug loading for self-delivery to tumors is recently reported, which has showed high clinical availability. However, the effect of PEG chain length on cell internalization efficiency and tumor targeting efficiency in this PEG-drug conjugate micelle self-delivery system has yet to be studied. Herein, pyropheophorbide-a (PhA) was used as a model drug and a fluorescent tracer to synthesize amphiphilic polymers with varying PEG chain lengths, which self-assembled into PhA-PEG2000 NPs and PhA-PEG5000 NPs with high drug loading (21.2% and 9.7%, respectively, according to calculation). The results showed that PhA-PEG2000 NPs had higher cell internalization in vitro than PhA-PEG5000 NPs, but much lower tumor accumulation in vivo than PhA-PEG5000 NPs. This was attributed to the longer in vivo blood circulation time of the latter. Furthermore, the in vitro and in vivo examinations revealed negligible side effects, indicating the intrinsic safety of the micelles. This study provides insight into the influence of PEG chain length on biodistribution of organs and tumor accumulation after intravenous administration of PEG-drug conjugate micelle and guides the design of drug incorporated amphiphilic polymer-based micelles.

Crystallization-driven formation poly (l-lactic acid)/poly (d-lactic acid)-polyethylene glycol-poly (l-lactic acid) small-sized microsphere structures by solvent-induced self-assembly

Improving hydrophobicity through the regulation of surface microstructures has attracted significant interest in various applications. This research successfully prepared a surface with microsphere structures using the Non-solvent induced phase separation method (NIPS). Poly(D-Lactic acid)-block-poly(ethylene glycol)-block-poly(D-Lactic acid) (PDLA-PEG-PDLA) block polymers were synthesized by ring-opening polymerization of D-Lactic acid (D-LA) using polyethylene glycol (PEG) as initiator. PLLA/PDLA-PEG-PDLA membrane with microscale microsphere morphology was fabricated using a nonsolvent-induced self-assembly method by blending the triblock copolymer with a poly(L-lactic acid) (PLLA) solution. In phase separation processes, the amphiphilic block copolymers self-assemble into micellar structures to minimize the Gibbs free energy, and the hydrophilic segments (PEG) aggregate to form the core of the micelles, while the hydrophobic segments (PDLA) are exposed on the outer corona resulting in a core-shell structure. The Stereocomplex Crystalline (SC), formed by the hydrogen bonding between PLLA and PDLA, can facilitate the transition from liquid-liquid phase separation to solid-liquid phase separation, and the PEG chain segments can enhance the formation of SC. The membrane, prepared by adjusting the copolymer content and PEG chain length, exhibited adjustable microsphere quantity, diameter, and surface roughness, enabling excellent hydrophobicity and controlled release of oil-soluble substances.

The effects of chain length of polyethylene glycol on porous Na2Ti6O13 for photocatalytic degradation of ofloxacin

The effects of chain length of polyethylene glycol on porous Na2Ti6O13 for photocatalytic degradation of ofloxacin

Efficient Drug Loading Method for Poorly Water-Soluble Drug into Bicelles through Passive Diffusion.

The bicelle, a type of solid lipid nanoparticle, comprises phospholipids with varying alkyl chain lengths and possesses the ability to solubilize poorly water-soluble drugs. Bicelle preparation is complicated and time-consuming because conventional drug-loading methods in bicelles require multiple rounds of thermal cycling or co-grinding with drugs and lipids. In this study, we proposed a simple drug-loading method for bicelles that utilizes passive diffusion. Drug-unloaded bicelles were placed inside a dialysis device and incubated in a saturated solution of ketoconazole (KTZ), which is a model drug. KTZ was successfully loaded into bare bicelles over time with morphological changes, and the final encapsulated concentration was dependent on the lipid concentration of the bicelles. When polyethylene glycol (PEG) chains of two different lengths (PEG2K and 5K) were incorporated into bicelles, PEG2k and PEG5k bicelles mitigated the morphological changes and improved the encapsulation rate. This mitigation of morphological changes enhanced the encapsulated drug concentration. Specifically, PEG5k bicelles, which exhibited the greatest prevention of morphological changes, had a lower encapsulated concentration after 24 h than that of PEG2k bicelles, indicating that PEGylation with a longer PEG chain length improved the loading capacity but decreased the encapsulation rate owing to the presence of a hydration layer of PEG. Thus, PEG with a certain length is more suitable for passive loading. Moreover, loading factors, such as temperature and vehicles used in the encapsulation process, affected the encapsulation rate of the drug. Taken together, the passive loading method offers high throughput with minimal resources, making it a potentially valuable approach during early drug development phases.

Enhancing hydrogel toughness by uniform cross-linking using modified polyhedral oligomeric silsesquioxane

The use of macro cross-linkers is one of the most effective approaches for developing tough hydrogels. However, the presence of uneven cross-linking and the resulting hydrogel inhomogeneity restrict further improvement. Here, we achieve uniform cross-linking by employing polyhedral oligomeric silsesquioxane (POSS)-grafted acrylated polyethylene glycol (PEG) as a cross-linker to enhance the toughness of hydrogels. The nano-sized hard silica core of POSS facilitates energy dissipation, and its dissolved form ensures uniform cross-linking through molecular-level dispersion. The peripheral acrylate groups introduce multiple interacting points, and the physical entanglements of long-chain PEG contribute to enhanced toughness. Incorporating acrylated POSS-PEG into polyacrylamide hydrogel yields enhanced properties such as toughness of up to 6531 kJ m−3 and break elongation up to 9455%, where the length of PEG chains grafted onto POSS is demonstrated to play a crucial role in facilitating energy dissipation and achieving high toughness.

68Ga-Labeled TMTP1 Derivatives with Moderate Hydrophilicity for Positron Emission Tomography of Hepatocellular Carcinoma in High Contrast.

The reported specific positron emission tomography (PET) probes for the diagnosis of highly metastatic hepatocellular carcinoma (HCC) suffer from excessively high background uptake and fast blood clearance. Herein, five 68Ga-labeled polyethylene glycol (PEG)-modified derivatives of the TMTP1 peptide were synthesized. The log D values decreased from -1.70 (non-PEGylated) to -1.97 to -2.94 corresponding to the increase of PEG chain length. Subnanomolar and nanomolar affinities comparable to the non-PEGylated TMTP1 derivative were revealed by the IC50 values in SMMC-7721 cells. [68Ga]Ga-NOTA-PEG2-TMTP1 presented a significantly higher tumor/liver ratio (4.19 ± 0.54, at 30 min post intravenous injection) and tumor/muscle ratio (2.14 ± 0.17) compared to the others and the previously radiolabeled TMTP1 derivatives. Small HCC lesions (<2 mm) in situ were detected with high tumor/liver ratio and low tumor/muscle ratio. The improved pharmacokinetics and blood clearance rate of 68Ga-labeled TMTP1 derivatives indicated that moderate hydrophilicity due to PEGylation contributed to high-contrast PET of HCC.

The Characteristics of the Metal-Free and Non-Conjugated Polymer Film with Self-Assembled Nanoparticles.

It is shown in this paper that a polymer, MA-PEG 1000-DGEBA (MP1D), exhibits antireflection, substrate-dependent photoluminescence (SDP), wide band-gap, and photoconduction characterization. MP1D was synthesized from maleic anhydride, polyethylene glycol 1000, and bisphenol-A diglycidyl ether. Self-assembled nanoparticles embedded in MP1D film and ranging from 2.5 to 31.6 nm are observed, which could be expected as scatterers to enhance light trapping and extraction. The size of the nanoparticle increases with the concentration of the MP1D solution. Besides solution concentration, the nanoparticle dimension could be modified by the chain length of polyethylene glycol in the polymer synthesis. The effects of solution concentration, annealing temperature, annealing period, and substrate on the photoluminescence (PL) of MP1D films are examined. Increasing solution concentration increases PL intensity. However, aggregation-caused quenching is explicit as the solution concentration exceeds 100 mM. PL intensity increases with annealing temperature, which could be attributed to crystallinity improvement. PL intensity increases with increasing the annealing period from 0.5 to 2 h. Nonetheless, as the annealing period exceeds 2 h, PL quenching is emerging, which could be due to aggregation. It is expected that MP1D could be a promising candidate for host materials and MP1D film could play a multifunctional role (antireflective and light-trapping functions) in optoelectronics.

Influence of PEG Chain Length of Functionalized Magnetic Nanoparticles on the Cytocompatibility and Immune Competence of Primary Murine Macrophages and Dendritic Cells.

A major drawback of nanoparticles (NPs) for biomedical applications is their preferential phagocytosis in immune cells, which can be avoided by surface modifications like PEGylation. Nevertheless, examinations of different polyethylene glycol (PEG) chain lengths on the competence of immune cells as well as possible immunotoxic effects are still sparse. Therefore, primary murine macrophages and dendritic cells were generated and incubated with magnetic nanoporous silica nanoparticles (MNPSNPs) modified with different mPEG chains (2 kDa, 5 kDa, and 10 kDa). Cytotoxicity, cytokine release, and the formation of reactive oxygen species (ROS) were determined. Immune competence of both cell types was examined and uptake of MNPSNPs into macrophages was visualized. Concentrations up to 150 µg/mL MNPSNPs showed no effects on the metabolic activity or immune competence of both cell types. However, ROS significantly increased in macrophages incubated with larger PEG chains, while the concentration of cytokines (TNF-α and IL-6) did not indicate a proinflammatory process. Investigations on the uptake of MNPSNPs revealed no differences in the onset of internalization and the intensity of intracellular fluorescence. The study gives no indication for an immunotoxic effect of PEGylated MNPSNPs. Nevertheless, there is still a need for optimization regarding their internalization to ensure an efficient drug delivery.

How does Poly(ethylene glycol) with varied chain length affect the thermo-responsive behavior of methyl cellulose in aqueous solutions?

In this study, by using a set of narrowly distributed polyethylene glycol (PEG) samples with varied average molar mass (PEGn, 9 <n < 454), we have systematically studied how PEG molar mass and solution concentration influence the thermal response behavior of methyl cellulose (MC) aqueous solutions (Mw = 4.3 × 105 g/mol, <Rg> = 71 nm) by a combination of isothermal titration calorimetry (ITC), rheometer, UV–vis spectroscopy, laser light scattering (LLS) and atomic force microscopy (AFM). At room temperature, ITC result clarifies the existence of extremely weak hydrophobic interactions between MC and PEG chains. In addition, for MC/PEG mixed solution with shorter PEGs (PEG22 and PEG90), experimentally measured zero-shear viscosity (ηexp) is confirmed to be 5–10% higher than the theoretical values (ηcalc), further supporting the interchain association. Whereas for MC/PEG454, insoluble aggregates are formed, which results in ηexp < ηcalc. Further, dynamic laser scattering (DLS) results further reveal how the percentage of peak area of aggregates depends on the chain length of PEG. During the heating process from T = 20 to 70 °C, a combination of UV, LLS and AFM results clearly illustrates that the shorter PEG chains can effectively stabilize the formed MC fibers and prevent the fiber extension; whereas for longer PEG chains, they can not only promote the nucleation process, but also destabilize the formed fibers and promote the fiber extension. Our result unambiguously reveals the macromolecular effect of PEGs on the thermal response behavior of MC in solutions.

Probing Surface and Interfacial Tension of Ionic Liquids in Vacuum with the Pendant Drop and Sessile Drop Method.

We report on the surface and interface tension measurements of the two ionic liquids (ILs) [C8C1Im][PF6] and [m(PEGn)2Im]I (n = 2, 4, 6) in a surface science approach. The measurements were performed in a newly developed and unique experimental setup, which allows for surface tension (ST) measurements using the pendant drop method and for contact angle measurements using the sessile drop method under the well-defined conditions of a high vacuum (from 10-7 mbar). The setup also allows for in vacuum transfer to an ultrahigh vacuum system for surface preparation and analysis, such as in angle-resolved X-ray photoelectron spectroscopy. For [C8C1Im][PF6], we observe a linear decrease in the surface tension with increasing temperature. The ST measured under high vacuum is consistently found to be larger than under ambient conditions, which is attributed to the influence of water uptake in air by the IL. For [m(PEGn)2Im]I (n = 2, 4, 6), we observe a decrease in the ST with increasing polyethylene glycol chain length in a vacuum, similar to very recent observations under 1 bar Argon. This decrease is attributed to an increasing enrichment of the PEG chains at the surface. The ST data obtained under these ultraclean conditions are essential for a fundamental understanding of the relevant parameters determining ST on the microscopic level and can serve as a benchmark for theoretical calculations, such as molecular dynamic simulations. In addition to the ST measurements, proof-of-principle data are presented for sessile drop measurements in HV, and a detailed description and characterization of the new setup is provided.

Fabrication of Multilayered Two-Dimensional Micelles and Fibers by Controlled Self-Assembly of Rod-Coil Block Copolymers.

Fabricating hierarchical nanomaterials by self-assembly of rod-coil block copolymers attracts great interest. However, the key factors that affect the formation of the hierarchical nanomaterials have not been thoroughly researched. Herein, we have synthesized two diblock copolymers composed of poly(3-hexylthiophene) (P3HT) and polyethylene glycol (PEG). Through a heating, cooling, and aging process, a series of multilayered hierarchical micelles and fibers were prepared in alcoholic solutions. The transition from fibers to hierarchical micelles are strictly influenced by the strength of the π-π stacking interaction, the PEG chain length, and solvent. In isopropanol, the P3HT22-b-PEG43 could self-assemble into hierarchical micelles composed of several two-dimensional (2D) laminar layers, driven by the π-π stacking interaction and van der Waals force. The P3HT22-b-PEG43 could not self-assemble into well-defined nanostructures in methanol and ethanol, but could self-assemble into fibers in isobutanol. However, the P3HT22-b-PEG113 with a longer corona block only self-assembled into fibers in four alcoholic solutions, due to the increase in dissolving capacity and steric hindrance. The sizes and the size distributions of the nanostructures both increased with the increase in polymer concentration and the decrease in solvent polarity. This study shows a method to fabricate the hierarchical micelles.

Exploring Carbonyl Chemistry in Non-aqueous Mg Flow Batteries.

Non-aqueous redox flow batteries (RFBs) are emerging electrochemical technologies for grid energy storage. Non-aqueous Mg RFBs that use Mg metal as the anode are especially promising due to various benefits of the Mg metal anode, including its low potential, high volumetric capacity, SEI-free, highly reversible operation and low cost. Despite the potential, there are rarely any studies on developing non-aqueous Mg RFBs. Herein, a non-aqueous Mg redox flow battery using a polymer catholyte is reported. Through rational molecular engineering, a carbonyl-based moiety is combined with a polyethylene glycol moiety to achieve a polymer with high voltage and high solubility in the ether-based electrolyte. A series of polymers with different polyethylene glycol chain lengths are synthesized and their performances are measured first at the molecular level, and then at the device level in a Mg redox flow battery using a Mg foil as the anode, the polymer solution as the catholyte and a porous membrane as the separator. The flow battery delivers a voltage of 1.8 V, a maximum capacity of 475 mAh/L, an average Coulombic efficiency of 90.5%, an average voltage efficiency of 67.4%, an energy efficiency of 61.0%, and an energy density of 0.855 Wh/L. Systematic mechanistic studies are performed to understand the performance decay mechanism and possible strategies for future improvement are discussed. This work opens a new avenue for the development of energy storage technologies for grid electricity storage.

Preparation of Epoxy Resin Emulsifiers with Different Structures and a Comparative Study of their Properties

AbstractThe structure of epoxy resin emulsifier has important influence on the stability of epoxy resin emulsion/dispersion. However, there is no systematic comparative study so far about the effect of the structure of the epoxy resin emulsifier on their physiochemical properties and performance. In this work, two types of linear (AB and ABA types) and one type of branched epoxy resin emulsifiers were prepared by using bisphenol A epoxy resin E‐44 as the hydrophobic chain segment A and polyethylene glycol (PEG) as the hydrophilic chain segment B, and their physicochemical properties were compared. It has been found that the branched epoxy resin emulsifier is more hydrophilic than the two kinds of linear epoxy resin emulsifiers as a result of higher content of hydrophilic PEG chains. More importantly, the solubilization ability of the branched epoxy resin emulsifier to toluene is much higher than that of the two linear epoxy resin emulsifiers and exhibits an unique behavior, i. e., it increases monotonically with increasing hydrophilic PEG chain length. This work shed a light on the structural importance of epoxy resin emulsifier on its physicochemical properties and may provide a better choice of emulsifiers for the preparation of stable epoxy resin emulsions/dispersions.

Effects of PEG Chain Length on Relaxometric Properties of Iron Oxide Nanoparticles-Based MRI Contrast Agent.

Iron oxide nanoparticles (IONPs) as magnetic resonance imaging (MRI) contrast agents have received considerable interest due to their superior magnetic properties. To increase the biocompatibility and blood circulation time, polyethylene glycol (PEG) is usually chosen to decorate IONPs. Although the surface effect induced by the PEGylation has an impact on the relaxometric properties of IONPs and can subsequently affect the imaging results, the occurrence of particle aggregation has troubled researchers to deeply explore this correlation. To shed light on this relationship, three diphosphonate PEGs with molecular weights of 1000, 2000, and 5000 Da were used to replace the hydrophobic oleate ligands of 3.6 nm and 10.9 nm IONPs. Then, the contrast enhancement properties of the resultant “aggregation-free” nanoparticles were carefully evaluated. Moreover, related theories were adopted to predict certain properties of IONPs and to compare with the experimental data, as well as obtain profound knowledge about the impacts of the PEG chain length on transverse relaxivity (r2) and longitudinal relaxivity (r1). It was found that r2 and the saturated magnetization of the IONPs, independent of particle size, was closely related to the chain length of PEG. The results unveiled the correlation between the chain length of the coated PEG and the relaxometric properties of IONPs, providing valuable information which might hold great promise in designing optimized, high-performance IONPs for MRI-related applications.

Tailoring PEGylated nanoparticle surface modulates inflammatory response in vascular endothelial cells

Polymer nanoparticles (NPs) are extensively studied as drug delivery systems for various therapeutic indications, including drug and imaging agent delivery to the brain. Despite intensive research, their toxicological profile has yet to be fully characterized. In particular, the more subtle effects of nanomaterials on inflammatory processes have scarcely been investigated. Surface properties of NPs are amongst parameters governing interactions between living cells and NPs. They could considerably influence the toxicity and inflammatory response of the cells exposed to NPs.Polymeric NPs investigated here present a core-shell structure. The core is constituted of hydrophobic poly(lactic acid) (PLA) block and the surface is composed of a shell of hydrophilic block of polyethylene glycol (PEG). The effect of PEG chain length coating on the expression of genes involved in the inflammation response was investigated in two vascular endothelial cell lines (bEnd.3 and HUVEC) by qPCR. Moreover, ROS generation following NP uptake was evaluated.PEGylated NPs induce a mild and transient activation of inflammatory cytokine and chemokine genes. However, differences in PEG chain length did not show any significant effect on cytokine and chemokine gene expression and PEGylated NPs did not trigger ROS generation.The present results could contribute significantly to a deeper understanding of nanomaterial interactions and toxicity with vascular endothelial cells, guiding scientists in material coating choices.

Heterogeneously supported active Pd(0) complex on silica mediated by PEG as efficient dimerization catalyst for the production of high energy density fuel

High energy-density hydrocarbon fuels are the key materials for aircraft to increase payload and expand flight distance. Under the catalysis of atomically dispersed Pd(0) complex, saturated hexacyclic exo-exo product with good fuel property can be synthesized via co-dimerization of norbornadiene (NBD) with quadricyclane (QC). But the fragile coordination state of homogeneous Pd(0) complex limited its application in fuel production. In this work, Pd(0) complex has been heterogeneously supported on silica support with the regulation of polyethylene glycol (PEG) to increase its stability and recyclability with limited sacrifice of the activity and dimer selectivity. The structure of silica support was tuned to achieve the proper interaction with PEG and Pd(0) complex. The chain length and concentration of PEG were adjusted to further optimize the state of Pd(0) complex on silica. The as-developed heterogeneous Pd(0) complex supported on dendritic mesoporous silica nanospheres regulated by PEG2000 exhibited superior performance for the production of high energy density fuel through selective NBD-QC co-dimerization.

Impact of PEGylation on an antibody-loaded nanoparticle-based drug delivery system for the treatment of inflammatory bowel disease

Nanoparticle-based oral drug delivery systems have the potential to target inflamed regions in the gastrointestinal tract by specifically accumulating at disrupted colonic epithelium. But, delivery of intact protein drugs at the targeted site is a major challenge due to the harsh gastrointestinal environment and the protective mucus layer. Biocompatible nanoparticles engineered to target the inflamed colonic tissue and efficiently penetrate the mucosal layer can provide a promising approach for orally delivering monoclonal antibodies to treat inflammatory bowel disease. The study aims to develop mucus-penetrating nanoparticles composed of poly(lactic-co-glycolic acid, PLGA) polymers with two different polyethylene glycol (PEG) chain lengths (2 kDa and 5kDa) to encapsulate monoclonal antibody against tumor necrosis factor-α (TNF-α). The impact of different PEG chain lengths on the efficacy of the nanosystems was evaluated in vitro, ex vivo, and in vivo. Both PLGA-PEG2k and PLGA-PEG5k nanoparticles successfully encapsulated the antibody and significantly reduced TNF-α secretion from activated macrophages and intestinal epithelial cells. However, only antibody-loaded PLGA-PEG2k nanoparticles were able to alleviate the experimental acute colitis in mice demonstrated by improved colon weight/length ratio, histological score, and reduced tissue-associated myeloperoxidase activity and expression of proinflammatory cytokine TNF-α levels compared with the control group. The results suggest that despite having no significant differences in the in vitro cell-based assays, PEG chain length has a significant impact on the in vivo performance of the mucus penetrating nanoparticles. Overall, PLGA-PEG2k nanoparticles were presented as a promising oral delivery system for targeted antibody delivery to treat inflammatory bowel disease. Statement of significanceThere is an unmet therapeutic need for oral drug delivery systems for safe and effective antibody therapy of inflammatory bowel disease. Therefore, we have developed PEGylated PLGA-based nanoparticulate drug delivery systems for oral targeted delivery of anti-TNF-α antibody as a potential alternative treatment strategy. The PEG chain length did not affect encapsulation efficiency or interaction with mucin in vitro but resulted in differences in in vitro release profile and in vivo efficacy study. We demonstrated the superiority of anti-TNF-α mAb-PLGA-PEG2k over mAb-PLGA-PEG5k nanoparticles to effectively exhibit anti-inflammatory responses in an acute murine colitis model. These nanoparticle-based formulations may be adjusted to encapsulate other drugs that could be applied to a number of disorders at different mucosal surfaces.