Polycyclic Aromatic Hydrocarbons Pollution Research Articles

Assessment of parent and alkyl -PAHs in surface sediments of Iranian mangroves on the northern coast of the Persian Gulf: Spatial accumulation distribution, influence factors, and ecotoxicological risks

Spatial patterns, potential origins, and ecotoxicological risk of alkylated (APAH) –and parent –(PPAH) polycyclic aromatic hydrocarbons (PAHs) were studied in mangrove surface sediments along the northern coasts of the Persian Gulf, Iran. The mean total concentrations (ngg-1dw) ∑32PAH, ∑PPAHs and ∑APAHs in sediments were 3482 (1689-61228), 2642 (1109-4849), and 840 (478-1273), respectively. The spatial variability was similar among these PAH groups, with the highest levels occurring in Nayband National Marine Park (NNMP). Physicochemical environmental factors, such as sediment grain size, and total organic carbon (TOC) contents, are significant factors of PAH distribution. These findings suggest that PAH pollution level is moderate-to-high, supporting the current view that mangrove ecosystems are under intensive anthropogenic impacts, such as petrochemical, oil and gas loads, port activities, and urbanization. Non-parametric multidimensional scaling (NPMDS) ordination demonstrated that NNMP mangrove is the critical site exhibiting high loading of PAH pollutants. Here, for the first time in this region, Soil quality guidelines ( SQGs), Toxic equivalency quotient (TEQ), Mutagenic equivalency quotient (MEQ), and composition indices comprising Mean maximum permissible concentration quotient (m-MPC-Q), and Mean effect range median quotient (m-ERM-Q ) methods were used to have a comprehensive risk assessment for PAH compounds and confirmed medium-to-high ecological risks of PAHs in the study area, particularly in the western part of the Gulf, highlighting the industrial impacts on the environment.

Toward better atmospheric polycyclic aromatic hydrocarbons pollution control in the Northern Hemisphere: Process analysis based on interpretable deep learning models

Toward better atmospheric polycyclic aromatic hydrocarbons pollution control in the Northern Hemisphere: Process analysis based on interpretable deep learning models

Optimized approach for naphthalene wastewater biodegradation by Enterobacter ludwigii NS12 isolated from petroleum industry sludge: Bioreactor study and kinetic investigation

Polycyclic aromatic hydrocarbons (PAHs) pollution is a pressing concern in environments, primarily due to human activities. Limited research exists on the degradation of PAHs by indigenous bacterial strains compared to other degraders. This study focuses on naphthalene biodegradation by isolated bacterial strains from petroleum waste. Naphthalene poses significant threats to ecosystems, inducing genotoxic, mutagenic, and carcinogenic effects. Bioremediation offers a safe and cost-effective solution by employing microbes to degrade naphthalene into non-toxic by-products. In this study, Enterobacter ludwigii NS12 found as the most efficient strain for naphthalene biodegradation. In the subsequent investigation the effect of key process parameters, including pH and temperature, on the biodegradation of naphthalene were studied. Under optimal conditions (pH 7.0 and temperature of 30 °C), Enterobacter ludwigii NS12 exhibited an 89.2 % removal efficiency in the bioreactor for naphthalene wastewater at a concentration of 300 mg/L. The confirmations of naphthalene biodegradation were investigated through residual analysis, revealing dibutyl phthalate and 1-octanol, 2-butyl as metabolites. Additionally, growth kinetic parameters μmax and Ks were evaluated, resulting in values of 0.2380 per day and 158.57 mg/L for Enterobacter ludwigii NS12, respectively. The findings of this study hold significant promise for the bioremediation of naphthalene contamination in the environment.

In-situ targeted removal of naphthalene from groundwater by peroxymonosulfate activation using molecularly imprinted activated carbon: Efficacy, mechanism and applicability

Efficient removal of low-concentration refractory polycyclic aromatic hydrocarbons (PAHs) pollutants is crucial for ensuring groundwater safety. In this study, surface molecularly imprinted catalyst (MIP@AC) was developed based on activated carbon (AC) and molecular imprinting technology, and then MIP@AC was introduced into the simulated permeable reaction barrier to evaluate the performance of MIP@AC activated peroxymonosulfate (PMS) in in-situ targeted remediation of naphthalene (NAP) contaminated groundwater. The results showed that the relative adsorption selectivity coefficient and relative degradation selectivity coefficient of the MIP@AC material relative to the non-imprinted material AC was as high as 31.47 and 10.88, respectively; that is, MIP@AC can better resist the interference of competitive pollutants and achieve efficient targeted removal of NAP. Additionally, the reactive oxygen species (ROS) yield was higher in the MIP@AC/PMS system compared to the AC/PMS system. The target pollutant NAP was precisely enriched in the imprinted cavity of the MIP@AC, realizing that ROS production and pollutant degradation occurred simultaneously in the MIP@AC imprinted cavity. Therefore, the spatial confinement effect of the imprinted cavity shortened the mass transfer distance between the ROS and NAP, thereby reducing the loss of ROS due to self-quenching. Besides, Cl- significantly promoted the targeted removal of NAP, while HCO3- had a slight inhibitory effect; humic acid had no effect because of its larger molecular structure, which does not fit into the small imprinted cavities preferred by NAP. Importantly, the MIP@AC/PMS system demonstrated effective anti-complex matrix interference ability and targeted removal performance for NAP under natural groundwater conditions. This study can promote further research on the surface molecularly imprinted catalyst/PMS system as a new strategy for in-situ targeted remediation technology of contaminated groundwater.

Metals and polycyclic aromatic hydrocarbons pollutants in industrial parks under valley landforms in Tibetan Plateau: Spatial pattern, ecological risk and interaction with soil microorganisms

The spatial patterns of pollutants produced by industrial parks are affected by many factors, but the interactions among polycyclic aromatic hydrocarbons (PAHs), metals, and soil microorganisms in the valley landforms of the Tibetan Plateau are poorly understood. Thus, this study systematically investigated the distribution and pollution of metals and PAHs in soil around an industrial park in the typical valley landform of the Tibetan Plateau and analyzed and clarified the interaction among metals, PAHs, and microorganisms. The results were as follows: metal and PAH concentrations were affected by wind direction, especially WN-ES and S-N winds; Cd (2.86–54.64 mg·kg−1) had the highest soil concentrations of the metals screened, followed by variable concentrations of Cu, Pb, and Zn; the pollution levels of metals and PAHs in the S-N wind direction were lower than those in the WN-ES wind direction; the Cd content of Avena sativa in the agricultural soil around the factory exceeded its enrichment ability and food safety standards; the closer to the center of the park, the higher the ecological risk of PAHs; and the TEQ and MEQ values of the PAHs were consistent with their concentration distributions. The results of the soil microbial diversity and co-occurrence network in the dominant wind direction showed that metal and PAH pollution weakened the robustness of soil microbial communities. Additionally, the diversity and robustness of soil microbial communities at the S wind site were higher than those at the ES wind site, which might be attributed to the lower metal content of the former than the latter, which plays a negative role in the biodegradation of PAHs. The results of this study provide insights into the site selection, pollutant supervision, and environmental remediation of industrial parks in typical landforms.

Lagging pollution of polycyclic aromatic hydrocarbons in the rebuilt e-waste site: From the perspective of characteristics, sources, and risk assessment

Little information is known regarding how the lagged pollution of polycyclic aromatic hydrocarbon (PAH) influenced the environment and human health after an e-waste dismantling site was rebuilt. This study investigated the characteristics, sources, and risk assessment of PAHs in a rebuilt e-waste site and its surrounding farmland by analyzing the samples of soil, dust, water, and vegetable. Concentrations of PAHs in soil, vegetable and water in the rebuilt site were relatively higher than in its surrounding farmland. The concentrations in surface soils, soil columns, dust, vegetables, and water varied from 55.4 to 3990 ng g−1, 1.65 to 5060 ng g−1, 2190 to 2420 ng g−1, 2670 to 10,300 ng g−1, and 46.8 to 110 μg L−1 in the e-waste site, respectively. On the farmland, PAH concentrations in surface soils, vegetables, and water ranged from 41.5 to 2760 ng g−1, 506 to 7640 ng g−1, and 56.6 to 89.2 μg L−1, respectively. A higher proportion of high-molecular-weight PAHs (HMW-PAHs) appeared in all multimedia compared with low-molecular-weight PAHs (LMW-PAHs). Diagnostic ratio together with positive matrix factorization (PMF) revealed that vehicle emission was the primary source in this area, and the activity of e-waste disposal was another important source in the rebuilt e-waste site. Based on the deterministic health risks, people working in the reconstructed e-waste site were exposed to low risks, whereas the residents living near the surrounding farmland were exposed to low risk. Sensitivity analyses indicated that exposure frequency and PAH concentrations were the main factors that influenced exposure risk. This study provides valuable insight into the comprehension of the lagging pollution effects of PAH on the environment and human health after the e-waste site was rebuilt.

Polycyclic aromatic hydrocarbon (PAH) phytoaccumulation in urban areas by Platanus × acerifolia, Celtis australis, and Tilia grandifolia leaves and branches.

Polycyclic aromatic hydrocarbon (PAH) concentrations in the leaves and 1-year-old branches of three common tree species growing in a middle-sized city located in a moderate climate zone were estimated. For this purpose, PAH phytoaccumulation in Platanus × acerifolia, Celtis australis, and Tilia grandifolia species from highly urbanized, traffic congested, and highly PAH-contaminated streets was compared with trees from non-contaminated parks in the same urban core. The gathered data was used to define 17 PAH profiles, identify the main PAH pollution emission sources, and determine the organ and species specificity of PAHs accumulation. Due to the direct absorption of polluted air via stomata, the leaves accumulated up to 30% more PAHs compared to the 1-year-old branches. As expected, PAH concentrations were much higher in street trees, while heavy weight PAHs (with five and six rings) were accumulated in the highest concentrations. The highest foliar Σ17 PAH concentrations were detected in street-grown C. australis, followed by P. acerifolia and T. grandifolia (502.68, 488.45, and 339.47ngg-1 dry weight (DW), respectively). The same pattern was noted for Σ17 PAHs in branches (414.89, 327.58, and 342.99ngg-1 DW, respectively). Thus, T. grandifolia emerged as the least effective PAH sink as it accumulated up to ~ 40% less PAHs than P. acerifolia and C. australis leaves/branches. Among the 17 tracked PAHs, benzo[a]anthracene, benzo[a]pyrene, dibenzo[a,h]anthracene, and pyrene were found to have accumulated in the highest concentrations in all analyzed species irrespective of the site, and accounted for more than 50% of the total detected PAHs. Finally, a "black box" about species and organ specificity, as well as specific drivers that limit PAHs uptake capacity by trees, was opened, while this work provides insights into further PAH phytoremediation strategies.

Spatiotemporal distribution, sources, and ecological risk of soil polycyclic aromatic hydrocarbons in Chinese urban agglomerations from 2000 to 2020

To investigate the spatial and temporal distribution, sources, and ecological risk of soil polycyclic aromatic hydrocarbons (PAHs) in China’s urban agglomerations from 2000 to 2020, a comprehensive search strategy was employed using the keywords “soil”, “PAHs”, and “city”. A total of 122 relevant studies that provided information on individual PAH content during the specified time period were collected. These studies encompassed 20 urban agglomerations in China, which were further categorized into two distinct periods: 2000 to 2010 and 2011 to 2020. The diagnostic ratio method and principal component analysis were employed to identify the sources of PAHs, and a risk quotient model was used to evaluate the soil ecological risk. The results revealed the average PAH content in the 20 urban agglomerations in China from 2011 to 2020 was 2,439 ± 4,633 ng·g-1, which exceeded the severe pollution level cut-off (> 1,000 ng·g-1). The soil PAH content in the period from 2011 to 2020 decreased by 28% compared to the soil PAH content in the period from 2000 to 2010. Soil PAH pollution was more severe in the northern urban agglomerations than in the southern urban agglomerations. Diagnostic ratios and principal component analysis demonstrated that the principal sources in most urban agglomerations in China were traffic and coal combustion. GeoDetector found that coal and fuel oil consumption were the main factors affecting the spatial differentiation of PAHs. The ecological risk quotient showed that approximately 80% of the urban agglomerations were at a medium-high ecological risk from 2000 to 2010, compared with 72% from 2011 to 2020. Thus, it is necessary to deepen energy structure reform to alleviate the threat of serious pollution caused by coal and fuel oil in urban agglomerations.

Risk Assessments of Polycyclic Aromatic Hydrocarbons in the Surface Sediments of Drinking Water Sources in Ifite Ogwari, South-East Nigeria

ABSTRACT Surface water is the main source of drinking water in Ifite Ogwari, Anambra State, South-East Nigeria. In aquatic environments, sediment functions as both a source and a sink of polycyclic aromatic hydrocarbons (PAHs). To determine the level of pollution, health concerns to people and the environment, and potential sources of PAHs in the surface water sediments in Ifite Ogwari, sediment samples were collected from 9 surface water sources used for drinking by Ifite Ogwari people and were analyzed using a Gas Chromatography/Flame Ionization Detector (GC-FID). In all sediment samples, only 11 PAHs out of 16 United States Environmental Protection Agency (USEPA) priority PAHs were detected while 5 were below detectable limits. The concentration of benzo[a]anthracene was high but detected in only 2 sediment samples while fluoranthene has a relatively close concentration across all samples. Benzo[k]fluoranthene has the highest concentration compared to other PAHs in the samples while benzo[a]pyrene has the lowest concentration across all samples. Atammele sediment was analyzed as the most carcinogenic followed by Isiachala with concentrations of 84.23 ng/µL and 51.92 ng/µL respectively. Ube stream sediment has the lowest concentration of PAHs (11.74 ng/µL). Ecological risk of the PAHs revealed a sediment-to-sediment variation in the risk profile. Human health risk assessment depicts that hazard index and total cancer risk for adults and children ranged from 2.3E-07 - 2.57E-05 and 4.85E-07 - 5.43E-05 respectively. Pyrogenic activities are the main source of PAHs in the sediments. The results provide a guide for monitoring PAHs pollution and protecting drinking water sources.

Tracking Interprovincial Flows of Atmospheric PAH Emissions Through Downscaling Estimates With Province‐Specific Emission Factors

AbstractAtmospheric polycyclic aromatic hydrocarbons (PAHs), which are emitted significantly by economic sectors, are closely related to the global incidence of human cancer. When assessing temporal changes in PAH emissions in a country that is vast in area, such as China, it is crucial to consider socioeconomic differences across geological regions. In this study, we developed PAH emission factors at the provincial level and used them to compile a Chinese PAH emission inventory. Subsequently, we estimated trade‐driven PAH emissions at the provincial level in 2007, 2010, 2012, 2015, and 2017, and examined the critical supply chain paths. The updated inventory reveals a distinct temporal trend in trade‐driven PAH emissions, although they remain at an order of magnitude similar to previous estimates. National total production‐, consumption‐, and income‐based PAH emissions, despite a rebound in 2012, exhibit a general decline from 59.3, 43.3, and 48.8 kt in 2007 to 52.1, 43.9, and 47.0 kt in 2017, respectively. These declines align with economic adjustments and emissions mitigation legislation. Spatial hotspots were concentrated in the most affluent Yangtze River Delta, Pearl River Delta, and Jing‐Jin‐Ji provinces on the demand side and in the northern coal resource‐rich provinces on the supply side. They primarily drive PAH emissions from the heavy industrial sectors of northern coal resource‐rich provinces. Fewer affluent provinces have experienced a rapid increase in trade‐driven PAH emissions after 2012, emphasizing the need for synergistic reduction measures to combat PAH pollution.

Adsorption of Pyrene and Arsenite by Micro/Nano Carbon Black and Iron Oxide.

Polycyclic aromatic hydrocarbons (PAHs) and arsenic (As) are common pollutants co-existing in the environment, causing potential hazards to the ecosystem and human health. How their behaviors are affected by micro/nano particles in the environment are still not very clear. Through a series of static adsorption experiments, this study investigated the adsorption of pyrene and arsenite (As (III)) using micro/nano carbon black and iron oxide under different conditions. The objectives were to determine the kinetics and isotherms of the adsorption of pyrene and As (III) using micro/nano carbon black and iron oxide and evaluate the impact of co-existing conditions on the adsorption. The microstructure of micro/nano carbon black (C 94.03%) is spherical-like, with a diameter of 100-200 nm. The micro/nano iron oxide (hematite) has irregular rod-shaped structures, mostly about 1 µm long and 100-200 nm wide. The results show that the micro/nano black carbon easily adsorbed the pyrene, with a pseudo-second-order rate constant of 0.016 mg/(g·h) and an adsorption capacity of 283.23 μg/g at 24 h. The micro/nano iron oxide easily adsorbed As (III), with a pseudo-second-order rate constant of 0.814 mg/(g·h) and an adsorption capacity of 3.45 mg/g at 24 h. The mechanisms of adsorption were mainly chemical reactions. Micro/nano carbon black hardly adsorbed As (III), but its adsorption capability for pyrene was reduced by the presence of As (III), and this effect increased with an increase in the As (III) concentration. The adsorbed pyrene on the micro/nano black carbon could hardly be desorbed. On the other hand, the micro/nano iron oxide could hardly adsorb the pyrene, but its adsorption capability for As (III) was increased by the presence of pyrene, and this effect increased with an increase in the pyrene concentration. The results of this study provide guidance for the risk management and remediation of the environment when there is combined pollution of PAHs and As.

Differentiated cognition of the effects of human activities on typical persistent organic pollutants and bacterioplankton community in drinking water source

Accelerated urbanization in developing countries led to a typical gradient of human activities (low, moderate and high human activities), which affected the pollution characteristics and ecological functions of aquatic environment. However, the occurrence characteristics of typical persistent organic pollutants, including organochlorine pesticides (OCPs) and polycyclic aromatic hydrocarbons (PAHs), and bacterioplankton associated with the gradient of human activities in drinking water sources is still lacking. Our study focused on a representative case – the upper reaches of the Dongjiang River (Pearl River Basin, China), a drinking water source characterized by a gradient of human activities. A comprehensive analysis of PAHs, OCPs and bacterioplankton in the water phase was performed using gas chromatography-mass spectrometry (GC-MS) and the Illumina platform. Moderate human activity could increase the pollution of OCPs and PAHs due to local agricultural activities. The gradient of human activities obviously influenced the bacterioplankton community composition and interaction dynamics, and low human activity resulted in low bacterioplankton diversity. Co-occurrence network analysis indicated that moderate human activity could promote a more modular organization of the bacterioplankton community. Structural equation models showed that nutrients could exert a negative influence on the composition of bacterioplankton, and this phenomenon did not change with the gradient of human activities. OCPs played a negative role in shaping bacterioplankton composition under the low and high human activities, but had a positive effect under the moderate human activity. In contrast, PAHs showed a strong positive effect on bacterioplankton composition under low and high human activities and a weak negative effect under moderate human activity. Overall, these results shed light on the occurrence characteristics of OCPs, PAHs and their ecological effects on bacterioplankton in drinking water sources along the gradient of human activities.

The Stabilizing Effect of Chitosan‐Modified Biochar (β‐CD/C‐BC) on Agricultural Soil Contaminated by the Cd‐Pyr Complex

AbstractThe composite pollution of heavy metals (HMs) and polycyclic aromatic hydrocarbons (PAHs) in agricultural soil is increasingly severe. HMs can undergo surface adsorption, complexation, or chemical reactions to transform from bioavailable species to residual species, achieving chemical morphological stability. However, these processes have no effect on PAHs. Biochar (BC), due to its inherent characteristics, can significantly enhance the stability of PAHs and is recommended as a potential co‐stabilizing material for both heavy metals and PAHs. In this study, rice husk biochar modified with β‐cyclodextrin and chitosan (β‐CD/C‐BC) was utilized to stabilize agricultural soil contaminated by Cd and Pyrene (Pyr). One‐way tests were conducted on the dosage and curing time of biochar after a complete cycle of treatment. The results demonstrated that the optimal effect was achieved when the dosage of β‐CD/C‐BC was 7.5 % or the curing time was 21 days. The removal efficiencies for Cd and Pyr were found to be 84.62 %, 64.22 % or 85.90 %, 65.78 %, respectively. Additionally, BCR testing revealed that β‐CD/C‐BC could convert HMs in soil into a residual state (from 32 % to 82 %) with the highest stabilization rate, thereby reducing their migration ability and ecological risk.

Polycyclic aromatic hydrocarbons (PAHs) pollution and risk assessment of soils at contaminated sites in China over the past two decades

With rapid urbanization in China, soil pollution at contaminated sites has emerged as a significant concern in the environmental protection plan. Moreover, extensive research has focused on the analysis of other major contaminants. However, over the past two decades, only a few studies have systematically analyzed polycyclic aromatic hydrocarbons (PAHs) in contaminated soils, particularly their source identification, contamination level assessment, and risk evaluation. This study addressed these research gaps by comprehensively evaluating soil PAHs contamination at these sites through the collection and screening of relevant literature data from the past 20 years using a “front page filtering” approach. The results suggested that the most contaminated sites in China were associated with petrochemical plants, steel mills, and coking plants. Coal/biomass burning emerged as the predominant source of PAHs pollution in the soils of contaminated sites across China. Overall, the soils of contaminated sites exhibited relatively low levels of PAHs contamination. The single-factor index method showed that benzo(a)pyrene (BaP) was the PAH monomer with the highest contamination level. Geographically, Northeast and North China exhibited relatively higher contamination levels and ecological risks. Moreover, PAHs posed significant health hazards, as they exhibited significantly high toxic effects on the respiratory system, carcinogenicity, aromatic hydrocarbon receptors, estrogen receptors, and antioxidant response elements. Additionally, children and youths faced higher health risks than adults. The findings from this study provide a solid basis for developing strategies to manage PAHs at contaminated sites in China.

Lichen biomonitoring to assess spatial variability, potential sources and human health risks of polycyclic aromatic hydrocarbons (PAHs) and airborne metal concentrations in Manchester (UK)

Airborne metals and organic pollutants are linked to severe human health impacts, i.e. affecting the nervous system and being associated with cancer. Airborne metals and polycyclic aromatic hydrocarbons (PAHs) in urban environments are derived from diverse sources, including combustion and industrial and vehicular emissions, posing a threat to air quality and subsequently human health. A lichen biomonitoring approach was used to assess spatial variability of airborne metals and PAHs, identify potential pollution sources and assess human health risks across the City of Manchester (UK). Metal concentrations recorded in lichen samples were highest within the city centre area and along the major road network, and lichen PAH profiles were dominated by 4-ring PAHs (189.82 ng g−1 in Xanthoria parietina), with 5- and 6-ring PAHs also contributing to the overall PAH profile. Cluster analysis and pollution index factor (PIF) calculations for lichen-derived metal concentrations suggested deteriorated air quality being primarily linked to vehicular emissions. Comparably, PAH diagnostic ratios identified vehicular sources as a primary cause of PAH pollution across Manchester. However, local more complex sources (e.g. industrial emissions) were further identified. Human health risk assessment found a “moderate” risk for adults and children by airborne potential harmful element (PHEs) concentrations, whereas PAH exposure in Manchester is potentially linked to 1455 (ILCR = 1.45 × 10−3) cancer cases (in 1,000,000). Findings of this study indicate that an easy-to-use lichen biomonitoring approach can aid to identify hotspots of impaired air quality and potential human health impacts by airborne metals and PAHs across an urban environment, particularly at locations that are not continuously covered by (non-)automated air quality measurement programmes.Graphical

[Spatial-temporal Distribution and Source Analysis of Polycyclic Aromatic Hydrocarbons in the Sediments of Poyang Lake].

The concentrations, spatial-temporal distribution, and influencing factors of 16 polycyclic aromatic hydrocarbons (PAHs) in the sediments of Poyang Lake were studied, and a quantitative source analysis of PAHs in different areas of the lake was conducted. PAHs were widespread within the sediments. The concentrations of ∑16PAHs in the surface sediments of all sites ranged from 203 to 2 318 μg·kg-1. The concentrations of PAHs in the surface sediments of the lake body were higher than those in the surface sediments of the inlet rivers. The ratio of PAHs in Poyang Lake was 4 rings > 5 rings > 6 rings > 3 rings > 2 rings; the composition of 4-ring PAHs was dominant, and its content accounted for 86.11% of ∑16PAHs. The 2- and 3-ring and some 4-ring PAHs, including Flua and Pyr, were more susceptible to SOM, and the 4 through 6-ring PAHs were more susceptible to ORP and heavy metals and other environmental factors. Spatially, the higher concentration of ∑16PAHs occurred in the area of the lake adjacent to Duchang County and Poyang County, where the terrain was relatively closed, and the water exchange with the surrounding area was less than that in other sections, which was not conducive to the migration, transformation, and degradation of pollutants. In the temporal distribution, the changes in PAHs concentration level and the development of GDP in Jiangxi Province showed high consistency, and the influence of economic development and human activities might have been the main reason for the increasing PAHs concentration level. The main sources of PAHs in surface sediments of Poyang Lake included petroleum pollution and oil and coal and biomass combustion sources, and there were some spatial differences in PAHs sources in different regions. This study can provide a reference for PAHs pollution in surface sediments of Poyang Lake, which is important for the ecological environmental protection and management of Poyang Lake.

Detection and treatment of mono and polycyclic aromatic hydrocarbon pollutants in aqueous environments based on electrochemical technology: recent advances.

Mono and polycyclic aromatic hydrocarbons are widely distributed and severely pollute the aqueous environment due to natural and human activities, particularly human activity. It is crucial to identify and address them in order to reduce the dangers and threats they pose to biological processes and ecosystems. In the fields of sensor detection and water treatment, electrochemistry plays a crucial role as a trustworthy and environmentally friendly technology. In order to accomplish trace detection while enhancing detection accuracy and precision, researchers have created and studied sensors using a range of materials based on electrochemical processes, and their results have demonstrated good performance. One cannot overlook the challenges associated with treating aromatic pollutants, including mono and polycyclic. Much work has been done and good progress has been achieved in order to address these challenges. This study discusses the mono and polycyclic aromatic hydrocarbon sensor detection and electrochemical treatment technologies for contaminants in the aqueous environment. Additionally mentioned are the sources, distribution, risks, hazards, and problems in the removal of pollutants. The obstacles to be overcome and the future development plans of the field are then suggested by summarizing and assessing the research findings of the researchers.

Source analysis and health risk assessment of polycyclic aromatic hydrocarbon (PAHs) in total suspended particulate matter (TSP) from Bengbu, China

The polycyclic aromatic hydrocarbon (PAH) concentrations in total suspended particulate matter (TSP) samples collected from October, 2021 to September, 2022 were analyzed to clarify the pollution characteristics and sources of 16 PAHs in the atmospheric TSP in Bengbu City. The ρ(PAHs) concentrations ranged from 1.71 to 43.85 ng/m3 and higher concentrations were detected in winter, followed by spring, autumn, and summer. The positive matrix factorization analysis revealed that, in spring and summer, PAH pollution was caused mainly by industrial emissions, gasoline and diesel fuel combustion, whereas in autumn and winter, it was coal, biomass and natural gas combustion. The cluster and potential source factor analyses showed that long-range transport was a significant factor. During spring, autumn, and winter, the northern and northwestern regions had a significant impact, whereas the coastal area south of Bengbu had the greatest influence in summer. The health risk assessment revealed that the annual total carcinogenic equivalent concentration values for PAHs varied from 0.0159 to 7.437 ng/m3, which was classified as moderate. Furthermore, the annual incremental lifetime cancer risk values ranged from 1.431 × 10−4 to 3.671 × 10−3 for adults and from 6.823 × 10−5 to 1.749 × 10−3 for children, which were higher than the standard.

Global trade-driven transfer of atmospheric polycyclic aromatic hydrocarbon emissions and associated human inhalation exposure risk

Polycyclic aromatic hydrocarbons (PAHs) are of significant public concern because of their toxicity and long-range transport potential. Extensive studies have been conducted to explore the source-receptor relationships of PAHs via atmospheric transport. However, the transfer of trade-driven regional and global PAHs is poorly understood. This study estimated the virtual PAHs emission transfer embodied in global trade from 2004 to 2014 and simulated the impact of international trade on global contamination and associated human inhalation exposure risk of PAHs. Results show that trade-driven PAHs flowed primarily from developed to less-developed regions, particularly in those regions with intensive heavy industries and transportation. As the result, international trade resulted in an increasing risk of lung cancer induced by exposure to PAHs (27.8% in China, 14.7% in India, and 11.3% in Southeast Asia). In contrast, we found decreasing risks of PAHs-induced lung cancer in Western Europe (63.2%) and the United States (45.9%) in 2004. Our findings indicate that final demand and emission intensity are the key driving factors contributing to rising and falling consumption-based PAHs emissions and related health risk respectively. The results could provide a useful reference for global collaboration in the reduction of PAHs pollution and related health risks.

Role of keystone drives polycyclic aromatic hydrocarbons degradation and humification especially combined with aged contaminated soil in co-composting

Accumulation of persistent organic pollutants polycyclic aromatic hydrocarbons (PAHs) in soil has become a global problem. Composting is considered one of the more economical methods of soil remediation and is important for the resourceful use of wastes. Agroforestry waste is produced in huge amounts and is utilized at low rates, hence there is an urgent need to manage it. Here, leaf (LVS) or rice straw (SVS) was co-composting with aged contaminated soil to investigate bacteria interaction to PAHs degradation and humus formation. The degradation rate of high molecular weight PAHs (HMW-PAHs) in LVS and SVS reached 58.9% and 52.5%, and the low molecular weight PAHs (LMW-PAHs) were 77.5% and 65%. Meanwhile, the humus increased by 44.8% and 60.5% in LVS and SVS at the end of co-composting. The topological characteristics and community assembly of the bacterial community showed that LVS had higher complexity and more keystones than SVS, suggesting that LVS might more beneficial for the degradation of PAHs. The stability of the co-occurrence network and stochastic processes (dispersal limitation) dominated community assembly made SVS beneficial for humus formation. Mantel test and structural equation models indicated that the transformation of organic matter was important for PAHs degradation and humus formation. Degradation of HMW-PAHs led to bacterial succession, which affected the formation of precursors and ultimately increased the humus content. This study provided potential technology support for improving the quality of agroforestry organic waste composting and degrading PAHs in aged contaminated soil.