Polychlorinated Biphenyls Emissions Research Articles

Assessment of the Pollution Levels, Sources, and Exposure Risks of Polychlorinated Biphenyls (PCBs) in Urban Park Dusts within Lagos Metropolis

ABSTRACTPolychlorinated Biphenyls (PCBs) represent organic contaminants that are persistent hazardous, carcinogenic, and genotoxic, thereby endangering both human well‐being and the ecosystem. This research delved into concentration patterns, sources, and health hazards associated with PCBs in dust collected from vehicle parks in Lagos metropolis. PCBs in samples of Lagos park dust extended from 1.00 to 36.80 ng/g, with PCB 18 exhibiting the highest mean concentration of 17.02 ng/g. Among the 12 PCBs studied, 5 Cl atom PCBs contributed the highest percentage, constituting 30% of the total PCB content in Lagos park dust. Dioxin‐like PCBs (DLPCBs) made up 27% of the overall PCBs composition in the dust. Using the positive matrix factorization method, eight sources of PCBs were identified, with biomass combustion contributing the highest proportion at 42% of the total PCB emissions. Health risk estimates revealed that the magnitude of PCBs exposure in human followed the order: ingestion > dermal contact > inhalation. PCBs exposure through ingestion in children was 9.33 times higher than that of adults, potentially attributed to the inadvertent intake of dust particles by children via hand‐to‐mouth contact. Cancer risk assessments for all PCB congeners remained below 10−6, indicating acceptable risk levels. PCB 18 had the highest cancer risk values, reaching 8.69 × 10−9 for children and 1.19 × 10−9 for adults.

Health risk assessment and development of human health ambient water quality criteria for PCBs in Taihu Basin, China

Polychlorinated biphenyls (PCBs) are a class of typical persistent organic pollutants (POPs) with carcinogenicity and extensively found in diverse environmental mediums. The Taihu Basin is one of the most economically developed regions in China, and it has also caused a lot of historical legacy and unconscious emissions of PCBs, posing a threat to the health of people in the region. This study counted the concentrations of PCBs in five environmental media (water, soil, air, dust, and food) in the Taihu Basin from 2000 to 2020 and used Monte Carlo simulation to simulate the multi-channel exposure of PCBs in people of different ages (children, teenagers, and adults), and evaluated their noncarcinogenic and carcinogenic health risks. Finally, the human health ambient water quality standards (AWQC) for PCBs were obtained using regional exposure parameters and bioaccumulation factors. The results showed that the pollution of PCBs in the Taihu Basin was relatively serious in China. The concentration of PCBs in dust is higher than other environmental media. And exposure to water and food is the main exposure pathway for PCBs in the population of the region. Besides, PCBs pose no noncarcinogenic risk to people in this region, but their carcinogenic risk to residents exceeds the safety threshold. Among the three population groups, adults have the highest risk of cancer, and prevention measures need to be taken by controlling the intake of related foods and the concentration of PCBs in water. The following human health AWQC values of the PCBs in Taihu Basin is 3.2 × 10−9 mg/L.

Concentration and sources of persistent organic pollutants within the vicinity of a scrap-iron smelting plant: Seasonal pattern and health risk assessment

Polychlorinated biphenyls (PCBs) are a class of ubiquitous and significant synthetic organic chemicals that pose deleterious threats to the environment and human health. This study examined the concentration, indoor-outdoor and seasonal change, sources, and health effects of PCBs in particulate-bound dust near a scrap iron recycling plant. PCBs levels were determined in samples using gas chromatograph mass spectrometer. The results indicated that 5 Cl atoms PCB constituted the majority of PCBs (41% overall), contributing 43% during the rainy season and 39% during the dry season. Dioxin-like PCBs (DLPCBs) contributed 38% during the rainy season and 33% during the dry season. In addition, DLPCB accounted for 26% and 40% of indoor and outdoor PCB emissions, respectively. Iron and steel production were identified as the highest identified contributing sources, accounting for 76% of PCB emissions in the rainy season, while plastic combustion had the highest contribution in the dry season, accounting for 44% of PCB emissions. Incremental Lifetime Cancer Risk assessment showed ingestion as the main exposure pathway for children and adults during the two seasons (74.42% and 58.24%, respectively), followed by dermal exposure, while inhalation had the least contribution. A multifaced approach involving relevant agencies, the industry, and the community is required to reduce exposure.

Unexpectedly high levels and health risks of atmospheric polychlorinated biphenyls in modern mechanical dismantling of obsolete electrical equipment: investigations in a large integrated e-waste dismantling industrial estate

Large industrial estates for electrical and electronic waste (e-waste) mechanical dismantling and recycling are gradually replacing outmoded small factories and intensive domestic workshops for e-waste manual and chemical dismantling. However, the air pollution and health risks of persistent organic pollutants during the modern mechanical processing of e-waste, especially obsolete electrical equipment, still remain unclear. Here, unexpectedly high levels (409.3 ng/m3) and health risks of airborne polychlorinated biphenyls (PCBs) were found during the mechanical processing of obsolete electric equipment or parts in a large integrated dismantling industrial estate, which is comparable to or a dozen times higher than those reported during chemical processing. In contrast, the levels (936.0 pg/m3) and health risks of particulate polybrominated diphenyl ethers (PBDEs) were all lower than those of previous studies. PCB emissions (44.9–3300.5 ng/m3) varied significantly across six mechanical dismantling places specifically treating waste motors, electrical appliances, hardware, transformers, and metals, respectively. The high PCB content and mass processing number of obsolete electrical equipment probably result in the highest PCB emissions from the mechanical dismantling of obsolete motors, followed by waste electrical appliances and metals. The PCB non-cancer and cancer risks associated with inhalation and dermal exposure in different mechanical dismantling places were all above the given potential risk limits. In particular, the health risks of dismantling obsolete motor exceeded the definite risk levels. Little difference in PCB emissions and health risks between working and non-working time suggested the importance of PCB volatilization from most e-waste. Such high PCB emissions and health risks of PCBs undoubtedly posed a severe threat to frontline workers, but fortunately, they decreased significantly with the increasing distance from the industrial estate. We highlight that PCB emissions and associated health risks from obsolete electrical equipment with high PCB content during mechanical dismantling activities should be of great concern.

Sources of polychlorinated biphenyls (PCBs) in sediments of the East China marginal seas: Role of unintentionally-produced PCBs

The production and use of intentionally-produced polychlorinated biphenyls (PCBs) in China have a short history compared with countries of North America and Europe, where technical PCB mixtures were manufactured in large amounts for decades before being banned. Unintentionally-produced PCB emissions increased dramatically in China, leading to unique profiles of PCB burdens. This study first time evaluated 208 individual PCB congeners at 94 sites from surface sediments of the East China Marginal Seas (ECMSs) and explored their sources. Non-technical PCBs transported from atmospheric transport and river discharge played a dominant role in most areas of the ECMSs, while historical residuals of technical PCBs occupied the fine-grained sediments in muddy areas of the central Yellow Sea (YS), regarding to the low sedimentation rate in the central YS. Furthermore, emissions from Taizhou located on the coast of the East China Sea (ECS), which is an important electronic waste dismantling site in East China, contributed additional technical PCBs to the inner shelf of the ECS. Our results indicate that non-technical PCBs have become the dominant PCB species in the ECMSs, and emphasize the synergistic effects of large riverine input, long-range atmospheric transport, and muddy shelf deposition on PCB source and sink of in marginal seas.

Identification of the Contamination Sources by PCBs Using Multivariate Analyses: The Case Study of the Annaba Bay (Algeria) Basin.

Persistent Organic Pollutants (POPs), particularly the indicator polychlorinated biphenyls (PCBs), were first quantified in water and sediments of two wadis, Boujemaâ and Seybouse, as well as in the effluents from a fertilizer and phytosanitary production industrial plant (Fertial). Since these contaminated discharges end in Annaba Bay (Algeria) in the Mediterranean Sea, with a significant level of contamination, all the potential sources should be identified. In this work, this task is conducted by a multivariate analysis. Liquid-liquid extraction and gas chromatography/mass spectrometry (GC-MS) methods were applied to quantify seven PCB congeners, usually taken as indicators of contamination. The sum of the PCB concentrations in the sediments ranged from 1 to 6.4 μg/kg dw (dry weight) and up to 0.027 μg/L in waters. Principal component analysis (PCA) and hierarchical cluster analysis (HCA) were used for the multivariate analysis, indicating that the main sources of PCB emissions in the bay are urban/domestic and agricultural/industrial. The outfalls that mostly contribute to the pollution of the gulf are the Boujemaâ wadi, followed by the Seybouse wadi, and finally by the Fertial cluster and more precisely the annex basin of the plant. Although referring to a specific site of local importance, the work aims to present a procedure and a methodological analysis that can be potentially applicable to further case studies all over the world.

Polyurethane Foam Emission Samplers to Identify Sources of Airborne Polychlorinated Biphenyls from Glass-Block Windows and Other Room Surfaces in a Vermont School.

We hypothesized that emissions of polychlorinated biphenyls (PCBs) from Aroclor mixtures present in building materials explain their concentrations in school air. Here, we report a study of airborne concentrations and gas-phase emissions in three elementary school rooms constructed in 1958. We collected airborne PCBs using polyurethane foam passive air samplers (PUF-PAS, n = 6) and PCB emissions from building materials using polyurethane foam passive emission samplers (PUF-PES, n = 17) placed over flat surfaces in school rooms, including vinyl tile floors, carpets, painted bricks, painted drywall, and glass-block windows. We analyzed all 209 congeners represented in 173 chromatographic separations and found that the congener distribution in PUF-PES strongly resembled the predicted diffusive release of gas-phase PCBs from a solid material containing Aroclor 1254. Concentrations of airborne total PCBs ranged from 38 to 180 ng m-3, a range confirmed by an independent laboratory in the same school. These levels exceed action levels for all aged children set by the State of Vermont and exceed guidance levels set by the U.S. EPA for children under age 3. Emissions of PCBs from the glass-block windows (30,000 ng m-2 d-1) greatly exceeded those of all other surfaces, which ranged from 35 to 2700 ng m-2 d-1. This study illustrates the benefit of the direct measurement of PCB emissions to identify the most important building remediation needed to reduce airborne PCB concentrations in schools.

Congener-Specific Emissions from Floors and Walls Characterize Indoor Airborne Polychlorinated Biphenyls.

To reconcile the federal regulation of material polychlorinated biphenyl (PCB) concentrations with recently implemented state regulations of airborne PCBs, there is a need to characterize the relationship between PCB emissions from surfaces and air concentrations. We hypothesized that the magnitude and congener distribution of emissions from floors and walls fully account for the airborne PCBs measured in rooms constructed during the height of PCB production and sales. We measured emissions of PCB congeners from various wall and floor materials using polyurethane foam passive emission samplers before and after hexane wiping. Our results revealed that PCB emissions from flooring adequately predicted the magnitude and congener distribution of PCBs observed in the room air. Emissions varied by material within a single building (5 × 103 ng m-2 day-1 from wood panel walls to 3 × 104 ng m-2 day-1 from vinyl tile) and within the same room. Yet congener distributions between material emission PCB profiles and room air PCB profiles were statistically similar. Hexane wiping significantly reduced PCB emissions (>60%), indicating the importance of surface films as an ongoing source of airborne PCBs. The magnitude and congener distribution of material bulk concentrations did not explain that of material emissions or air concentrations. Passive measurements of polychlorinated biphenyl emissions from floors in a university building predict the concentrations of PCBs in room air.

Occurrences and spatial distributions of dioxin-like polychlorinated biphenyls in chlorobenzene and chloroethylene manufacturing processes in China

As a group of pollutants listed in the Stockholm Convention, polychlorinated biphenyls (PCB) should be eliminated and their releases should be controlled. For this purpose, a complete PCB emission inventory is urgently required. Current unintentional releases of PCB were dominantly focused on waste incineration and non-ferrous metal production industries. The formation of PCB in chlorinated chemical manufacturing processes is poorly understood. In this study, occurrences and inventory of dioxin-like PCB (dl-PCB) in three typical chemical manufacturing processes, including chlorobenzene and chloroethylene production processes, were investigated. The bottom residues, which were high boiling point by-products after rectification tower, contained higher concentration of PCB than other stage samples in monochlorobenzene production and trichloroethylene production processes. The PCB concentrations were as high as 1.58 ng/mL and 152.87 ng/mL, respectively, which should be further concerned. The toxic equivalent quantities (TEQ) of dl-PCB in monochlorobenzene, trichloroethylene, and tetrachloroethylene products were 0.25 μg TEQ/t, 1.14 μg TEQ/t, and 5.23 μg TEQ/t, respectively. The mass concentration and TEQ of dl-PCB determined in this research can be used for the further development of dl-PCB emission inventory from these chemical manufacturing industries. In addition, temporal and spatial trends of PCB releases from typical chemical manufacturing processes from 1952 to 2018 in China were clarified. The releases increased rapidly in the latest two decades and presented an expansion tendency from the southeast coastal areas to northern and central areas. The continuing upward trend for the output and the high dl-PCB TEQ of chloroethylene indicated significant releases of PCB from chemical manufacturing processes and should receive more attention.

Sedimentary records of persistent organic pollutants (OCPs and PCBs) in Ngoring Lake, the central Tibetan Plateau, China: Impacts of westerly atmospheric transport and cryospheric melting

Lake sediments in remote alpine regions are used to infer information on persistent organic pollutants (POPs) delivery via long-range atmospheric transport (LRAT) with limited influences from local sources. When studying the deposition history of POPs on the Tibetan Plateau, regions influenced by westerly air mass flow have received insufficient attention compared with regions governed by the monsoon. Herein, we collected and dated two sediment cores from Ngoring Lake to reconstruct the depositional time trends of 24 organochlorine pesticides (OCPs) and 40 polychlorinated biphenyls (PCBs) and assess the response to emission reductions and climate change. DDTs, HCHs, hexachlorobenzene (HCB), and PCBs were all detected in the sediment core at low concentrations of 110–600, 4.3–400, 8.1–60, and 3.3–71 pg/g, respectively. The composition of PCBs, DDTs, and HCHs was dominated by congeners with 3 and 4 chlorines (avg. 70 %), p,p’-DDT (avg. 90 %), and β-HCH (avg. 70 %), respectively, indicating the influence of LRAT and the contribution of technical DDT and technical HCH from potential source regions. Temporal trends of PCB concentrations normalized by total organic carbon echoed the peak of global emissions of PCBs around 1970. The rising trend of concentrations of β-HCH and DDTs after the 1960s in sediments was mainly explained by the input of contaminants with melting ice and snow from a cryosphere shrinking under global warming. This study verifies that westerly air mass flow brings fewer contaminants to the lacustrine environment on the Tibetan Plateau than the monsoon and demonstrates the impacts of climate change on the secondary emission of POPs from the cryosphere to the sediments.

Distribution, composition and risk assessment of PAHs and PCBs in cryospheric watersheds of the eastern Tibetan Plateau

Polycyclic Aromatic Hydrocarbons (PAHs) and Polychlorinated Biphenyls (PCBs) are significant components of persistent organic pollutants (POPs) and pose a threat to both ecosystems and human health. To explore their spatial distribution, origins, and risk assessment, we collected 25 glacial meltwater and downstream river water samples in the eastern Tibetan Plateau (including the Qilian Mountains in the northeast) during the summer of 2022 (June–July). Our results showed that ∑PAHs and ∑PCBs were present in a wide range from ND-1380 ng/L and ND-1421 ng/L, respectively. Compared to other studies worldwide, the ∑PAHs and ∑PCBs in the Hengduan Mountains were at high levels. The PAHs and PCBs mainly consisted of low-molecular-weight homologs, including Ace, Flu, Phe, and PCB52. Phe was the primary component of PAHs. Glacial meltwater samples generally exhibited low concentration of PAHs and PCB52, whereas downstream river water samples typically showed high concentration of PAHs and PCB52. We attributed this characteristic to the influence of pollutants physicochemical properties, altitude effect, long-range transport (LRT), and local environmental conditions. In the eastern Tibetan Plateau glacier basin (especially in the Hailuogou watersheds), the concentration of PAHs and PCB52 in runoff generally increased with decreasing elevation. We believe that the primary factor affecting the concentration of PAHs and PCB52 in the region is the difference in local human activity inputs from various altitudes. The composition characteristics of PAHs and PCBs suggested that incomplete coal combustion and coking discharge mainly caused PAHs, while the combustion of coal and charcoal and the release of capacitors primarily caused PCBs. We assessed the carcinogenic risk of PAHs and PCBs in the glacier basin of the TP and found that the potential threat of PAHs was stronger than that of PCBs. Overall, this study provides new insights into the ecological security of water resources in eastern Tibetan Plateau. It is significant for controlling PAHs and PCBs emissions, assessing the ecological environment of the glacier watershed, and regional human health.

Temporal and spatial variations in atmospheric unintentional PCB emissions in Chinese mainland from 1960 to 2019

Abstract. Polychlorinated biphenyls (PCBs) are nowadays mainly unintentionally produced, since their use and manufacture has been banned. PCBs, especially those dioxin-like compounds, have been proven harmful to ecosystems and human health. Detailed information about the spatiotemporally distribution of unintentionally produced PCBs (UP-PCBs) is crucial for understanding the environmental fate and associated health risks. However, research estimating UP-PCBs emission in China is limited. In this study, a source-specific and year-varying emission factor (EF) dataset was used to compile provincial emissions of 12 dioxin-like UP-PCBs congeners for 66 sources in the Chinese mainland from 1960 to 2019. In addition to that, emissions for 2019 were allocated into 0.1∘×0.1∘ grids. The results indicated that historical national UP-PCBs emission represented an increasing trend until around 1995 and then showed an overall decreasing trend from 1995 to 2019. Cement production was the largest UP-PCBs emission source in the Chinese mainland. Geographically, East and North China contributed the largest UP-PCBs emission across the Chinese mainland. High emission densities occurred mainly in the densely populated and well-developed regions such as Yangtze River Delta Urban Agglomeration and Pearl River Delta. Furthermore, highly positive correlations of emission densities with population and GDP densities were identified.

Interference of Past Soil Contaminations in the Biomonitoring of PCB Emissions from a Recovered Derived Fuels (RDFs) Co-Powered Cement Plant

Although the intentional production of polychlorinated biphenyls (PCBs) has totally been banned, these pollutants are still released into the atmosphere by industrial and domestic burning processes and by volatilization from soils locally contaminated by PCB spill-overs. The present work aims at identifying the PCB sources in a mixed land use area of northeastern Italy around a cement plant co-powered with recovered derived fuels (RDFs) from 2018. Leaves of Robinia pseudoacacia trees were systematically sampled over c. 40 km2 in 37 sites and analyzed for 12 dioxin-like and 20 non-dioxin-like congeners. The samples of most sampling sites had a PCB content < LOD, whereas those with higher content were located in urban sites. The spatial distribution of PCB leaf content was not centered on the purported emission sources. The samples of three spatially unrelated sites had high contents of 2, 12 and 18 PCB congeners, with the last two having combinations fully compatible with past commercial mixtures traded under different names. Comparison of these results with those of previous (bio-)monitoring surveys supports the hypothesis that the area has been subjected to punctiform PCB spill-overs, which overwhelm the contribution from present day industrial emissions, comprised of those actually derived from the use of RDFs.

The concentrations and sources of PAHs and PCBs in soil from an oil field and estuary in the Yellow River Delta, China

The occurrence of organic pollutants [i.e. polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs)] had been assessed in the soil samples collected from two sub-regions (an oil field and the Yellow River Estuary) in the Yellow River Delta (YRD), China. The concentrations of PAHs and PCBs in the soil were in the range of 157.8–481.7 μg kg−1 (dry weight) and 5.6–56.6 μg kg−1 (dry weight), respectively. The average concentration of PAHs in the soil samples from the oil field were 274.0 μg kg−1, and that in the estuary soil samples were 244.4 μg kg−1. The average concentration of PCBs in the soil samples from the oil field and the estuary were 24.2 μg kg−1 and 10.8 μg kg−1, respectively. The contribution of low molecular weight PAHs (two-ring and three-ring PAHs) was larger in the soil samples from the oil field than that in the estuary soil samples. Both PAHs and PCBs contaminations in the estuary area were lower than that in the oil field area. By using diagnostic ratios analysis, the main source of PAHs was attributed to petroleum input caused by the fuel oil or light refined petroleum products in the Gudong Oilfield. The amount of low-chlorine congeners (three to four chlorine atoms) PCBs in soil samples from the oil field were higher than that in the estuary soil samples. The congeners analysis of PCBs and the correlation analysis between the concentrations of PAHs and PCBs were employed. The results indicated that the emission of PCBs in YRD were influenced by both Gudong oilfield and other industrial sources.

Aerobic Bioaugmentation to Decrease Polychlorinated Biphenyl (PCB) Emissions from Contaminated Sediments to Air.

We conducted experiments to determine whether bioaugmentation with aerobic, polychlorinated biphenyl (PCB)-degrading microorganisms can mitigate polychlorinated biphenyl (PCB) emissions from contaminated sediment to air. Paraburkholderia xenovorans strain LB400 was added to bioreactors containing PCB-contaminated site sediment. PCB mass in both the headspace and aqueous bioreactor compartments was measured using passive samplers over 35 days. Time-series measurements of all 209 PCB congeners revealed a 57% decrease in total PCB mass accumulated in the vapor phase of bioaugmented treatments relative to non-bioaugmented controls, on average. A comparative congener-specific analysis revealed preferential biodegradation of lower-chlorinated PCBs (LC-PCBs) by LB400. Release of the most abundant congener (PCB 4 [2,2′-dichlorobiphenyl]) decreased by over 90%. Simulations with a PCB reactive transport model closely aligned with experimental observations. We also evaluated the effect of the phytogenic biosurfactant, saponin, on PCB bioavailability and biodegradation by LB400. Time-series qPCR measurements of biphenyl dioxygenase (bphA) genes showed that saponin better maintained bphA abundance, compared to the saponin-free treatment. These findings indicate that an active population of bioaugmented, aerobic PCB-degrading microorganisms can effectively lower PCB emissions and may therefore contribute to minimizing PCB inhalation exposure in communities surrounding PCB-contaminated sites.

Levels, time trends, and distribution of dioxins and polychlorinated biphenyls in fishes from the Baltic Sea

Fish absorb dioxins from the environment through water and contact with sediments but the main source is food. These contaminants also enter the human body with food, including through the consumption of fish. This study presents the dioxin and polychlorinated biphenyl (PCB) concentrations in 145 samples of four fish species (herring, sprat, sea trout, salmon) caught in the southern Baltic Sea. The study results permit assessing whether the efforts made in recent years to reduce dioxin and PCB emissions into the environment have translated into decreases in concentrations of these pollutants in Baltic Sea fishes and whether these raw fish materials meet food law requirements. The safest fish species with regard to dioxins were designated, as were those of which consumption should be limited. The influence of fish age (length) and weight on dioxin and dioxin-like polychlorinated biphenyl (dl-PCB) concentrations was investigated. The correlation between fat content and dioxin concentration was determined. The Baltic Sea region and fishing ports from which the least contaminated fish come were also determined. The studies indicated that dioxin and PCB concentrationsin fishes from Polish fishing areas are currently lower than they were twenty years ago.

Airborne lead and polychlorinated biphenyls (PCBs) are associated with amyotrophic lateral sclerosis (ALS) risk in the U.S

Amyotrophic lateral sclerosis (ALS) risk is linked to environmental exposures. The National Emissions Inventory (NEI) database compiles mandatory reports of levels of airborne contaminants from a variety of stationary and mobile pollution sources across the U.S. The objective of this study was to identify airborne contaminants that may be associated with ALS etiology for future study. We geospatially estimated exposure to airborne contaminants as risk factors for ALS in a nationwide large de-identified medical claims database, the SYMPHONY Integrated Dataverse®. We extracted zip3 of residence at diagnosis of ~26,000 nationally distributed ALS patients and n = 3 non-ALS controls matched per case for age and sex. We individually aggregated the median levels of each of 268 airborne contaminants recorded in the NEI database for 2008 to estimate local residential exposure. We randomly broke the dataset into two independent groups to form independent discovery and validation cohorts. Contaminants associated with increased ALS risk in both the discovery and validation studies included airborne lead (false discovery rate (FDR) = 0.00077), and polychlorinated biphenyls (PCBs), such as heptachlorobiphenyl (FDR = 3.60E−05). Small aircraft were the largest source of airborne lead, while the PCB emissions came from certain power plants burning biomass, and from industrial boilers. Associations with residential history of lead exposure were confirmed in two additional cohorts (10 year top quartile in New Hampshire/Vermont OR 2.46 95% CI 1.46–2.80, and in Ohio OR 1.60 95% CI 1.28–1.98). The results of our geospatial analysis support neurotoxic airborne metals and PCBs as risk factors for ALS.

Polychlorinated Biphenyl Emissions from Steelmaking Electric Arc Furnaces.

Electric arc furnaces (EAFs) in steelmaking plants are a major source of dioxins. Preheating of steelmaking raw materials is widely used in EAFs to reduce energy consumption. Few studies have investigated emissions of dioxin-like polychlorinated biphenyls (PCBs) from EAFs, and the PCB emission levels and characteristics during preheating are unknown. In this study, PCB concentrations and distributions in stack gases emitted during EAF preheating were determined. The average dioxin-like PCB concentrations in stack gases emitted during preheating of three EAFs were 1236.1, 81,664.4, and 669.8pg/Nm3, respectively. These values were greatly influenced by the composition of the steelmaking raw materials. The PCB profiles in all samples were dominated by less-chlorinated homologs. PCB emission factor for preheating in the EAFs is 0.58µg WHO-TEQ/ton averagely, indicating significant emissions of PCBs from preheating process. The data will be useful for developing approaches for preventing and controlling PCB emissions from EAFs.

Atmospheric organochlorine pesticides (OCPs) and polychlorinated biphenyls (PCBs) in the Antarctic marginal seas: Distribution, sources and transportation

From November 2013 to March 2014, air samples were collected in the Antarctic marginal seas during the 30th Chinese Antarctic research expedition. Organochlorine pesticides (OCPs) and polychlorinated biphenyls (PCBs) were analyzed in these samples. The mean concentrations were observed for hexachlorobenzene (HCB) >ΣPCBs >Σhexachlorocyclohexanes(HCHs) >Σdichlorodiphenyltrichloroethane(DDTs)>Σchlordanes. High levels of HCB were found near east Antarctica and in the Ross Sea, reflecting the re-emission of HCB from environmental reservoirs of these regions. Parent DDTs (p,p’- and o,p’-DDT) were rarely detected, suggesting that atmospheric DDT was predominantly influencedby weathered DDT from some secondarysources. However, fresh inputs of DDTs could not be excluded because there were still some samples with high proportions of parent DDTs. HCHs only were detected in the South Indian Ocean (near Australia), andthis result might be related to the intense emissions of HCHs from southern Australia. Ratios of trans-chlordane/cis-chlordanein most samples were lower than that in technical chlordane, reflecting the main influence of weathered chlordane. High levels of ΣPCBs were found in the Ross Sea, suggesting an intense re-emission of PCBs. Furthermore, atmospheric PCBs near the Antarctic Peninsula were also relatively high, this finding might be attributed to the emissions of PCBs from nearby Antarctic research stations. Comparing with the Arctic, transport of OCPs and PCBs towards Antarctica is more difficult. The Antarctic marginal seas would act as both barriers and “buffer zones”during the transportation processes.

Spatio-temporal assessment of the polychlorinated biphenyl (PCB) sediment contamination in four major French river corridors (1945–2018)

Abstract. Environmental pollution by polychlorinated biphenyls (PCBs) is a key cause for concern about river quality because of their low degradation rates leading to their accumulation in sediments and living organisms. An original interdisciplinary work was conducted along the four main French rivers (Seine, Rhône, Loire and Garonne rivers), which flow into major European seas. We completed a dataset based on sediment analyses provided by monitoring agencies, port authorities and research teams on different solid matrices (sediment cores, bed and flood deposits, suspended particulate matter and dredged sediments). This dataset focused on the seven indicator PCBs and their sum (ΣPCBi) from 1945 to 2018 (nΣPCBi =1416). Special effort was put into the quality control to provide robust spatio-temporal information. Taking into account hydrological and human drivers, we outlined two main pollution trends: (1) from 1945 to 1975, a quick increase in ΣPCBi (up to 4 mg kg−1 dry weight, dw) and a sharp decrease in the 1980s on the Seine and Loire rivers and (2) increasing but moderate ΣPCBi levels (50 to 150 µg kg−1 dw) followed by a decline after the 1990s on the Rhône and Garonne rivers. In addition to these patterns, PCB emissions from urban and industrial areas or accidental events were significant in each river. Finally, when calculating specific flux, the Rhône exhibited the uppermost ΣPCBi load (up to 12 µgm-2yr-1 in 1977–1987), at least 25 % higher than those of the Seine and Loire rivers, while the Garonne showed a very low flux. In western Europe, we confirmed that the Rhône, Seine and Loire rivers contribute significantly to the PCB contamination of the seas, while French specific ΣPCBi fluxes are 2 orders of magnitude lower than those found in American or Asian rivers. The dataset is available at https://doi.org/10.1594/PANGAEA.904277 (Dendievel et al., 2019).