Polycationic Antimicrobial Peptides Research Articles

Colistin Interaction and Surface Changes Associated with mcr-1 Conferred Plasmid Mediated Resistance in E. coli and A. veronii Strains.

Colistin, a polycationic antimicrobial peptide, is one of the last-resort antibiotics for treating infections caused by carbapenem-resistant Gram-negative bacteria. The antibacterial activity of colistin occurs through electrostatic interaction between the polycationic peptide group of colistin and the negatively charged phosphate groups of lipid A membrane. This study investigated the interaction of colistin with the outer membrane and surface constituents of resistant and susceptible strains of Escherichia coli and Aeromonas veronii harboring mcr-1 resistance gene. Bacterial membrane and lipopolysaccharide used in this study were isolated from susceptible as well as colistin-resistant strains of E. coli and A. veronii. Interaction of colistin with the bacterial surface was studied by deoxycholate and lysozyme sensitivity test, N-phenyl-1-naphthylamine (NPN) uptake assay, Atomic force microscopy (AFM), Zeta potential measurements and 1H NMR. The binding affinity of colistin was found to be lower with outer membrane from resistant strains in comparison with the susceptible strains. Colistin exposure enhances the outer membrane permeability of the susceptible strains to deoxycholate and lysozyme. However, on the other hand, colistin dose of 256 µg/mL did not permeabilize the outer membrane of resistant bacteria. The NPN permeability in resistant strains was greater in comparison with susceptible strains. Atomic force microscopy images depicted smooth, featherless and deformed membranes in treated susceptible cells. Contrary to the above, resistant treated cells displayed surface roughness topography even at 256 µg/mL colistin concentration. Surface charge alterations were confirmed by Zeta potential measurements as a function of the growth phase. Mid-logarithmic phase susceptible strains showed a greater negative charge than resistant strains upon exposure to colistin. However, there was no statistical variation in the Zeta potential measurements between resistant and susceptible strains at the stationary phase. NMR analysis revealed line broadening in susceptible strains with increasing colistin: LPS aggregates mass ratio. Moreover, resistant strains did not show line broadening for the outer membrane, even at the highest mass ratio. The findings of this study suggest that the resistant strains of E. coli and A. veronii can block the electrostatic contact between the cationic peptide and anionic lipid A component that drives the first phase of colistin action, thereby preventing hydrophobically driven second-tier action of colistin on the outer lipopolysaccharide layer.

Silk Hydrogel Electrostatically Functionalized with a Polycationic Antimicrobial Peptide: Molecular Interactions, Gel Properties, and Antimicrobial Activity.

Functionalization of silk fibroin hydrogel with antimicrobial activity is essential for promoting the applications of this excellent biomaterial. In this work, a simple approach based on electrostatic interaction is adopted to produce antimicrobial silk hydrogel containing an antimicrobial peptide (AMP), polymyxin B, an important last-line antibiotic to treat multidrug-resistant bacterial superbugs. The polycationic property of this peptide and the negative charge of silk fibroin lead to strong interactions between them, as demonstrated by changes in nanofibril structure, gelation kinetics, ζ-potential, fluorescence emission, and rheological properties of the gel. The hydrogels loaded with polymyxin B demonstrated antimicrobial activity against two Gram-negative bacterial strains. A combination of the results from the different characterizations suggests that the optimal molar ratio of polymyxin B to silk fibroin is 1:2.5. As most AMPs are cationic, this electrostatic approach is suitable for the straightforward functionalization of inert silk hydrogel with other AMPs.

Gelatinase-responsive release of an antibacterial photodynamic peptide against Staphylococcus aureus.

Staphylococcus aureus (S. aureus) related staphylococcal infection is one of the most common types of hospital-acquired infections, which requires selective and effective treatment in clinical practice. Considering gelatinase as a characteristic feature of S. aureus, gelatinase-responsive release of the antibiotic reagent thereby can target the pathogenic S. aureus while sparing beneficial bacteria in the microflora. In this work, we design a hybrid antibacterial photodynamic peptide (APP, Ce6-GKRWWKWWRRPLGVRGC) based on the polycationic antimicrobial peptide GKRWWKWWRR by introducing a photosensitizer chlorin e6 (Ce6) at the N-terminus, a cysteine residue at the C-terminus, and a gelatinase cleavage site (PLGVRG) inserted between the C-terminal cysteine and the polycationic peptide. This multi-motif peptide assembles with gold nanoclusters (AuNc) via Au-thiol bonding and affords a gelatinase-responsive antibacterial photodynamic nanocomposite (GRAPN). In vitro results show that the gelatinase secreted by S. aureus can cleave and release APP from AuNc, thereby resulting in preferential killing of S. aureus over E. coli. In a mouse model of staphylococcal skin wound infection, by integrating gelatinase-responsive drug release and the synergistic effect of a photodynamic agent and APP, GRAPN exhibits a marked photodynamic antibacterial activity, effectively eradicates S. aureus infection, and promotes rapid healing of the infected wounds.

Eukaryotic phosphatase inhibitors enhance colistin efficacy in gram-negative bacteria.

The mounting threat of multi-drug-resistant (MDR) bacteria places a tremendous strain on the antimicrobial clinical arsenal, forcing physicians to revert to near-obsolete antibiotics to treat otherwise intractable infections. Antibiotic adjuvant therapy has emerged as a viable alternative to the development of novel antimicrobial agents. This method uses combinations of an existing antibiotic and a non-antimicrobial small molecule, where the combination either breaks drug resistance or further potentiates antibiotic activity. Through a high-content screen of eukaryotic kinase inhibitors, our group previously identified two highly potent adjuvants that synergize with colistin, a cyclic, polycationic antimicrobial peptide that serves as a drug of last resort for the treatment of MDR Gram-negative bacterial infections. Cell signaling proteins implicated in colistin resistance mechanisms display both kinase and phosphatase activities. Herein, we explore the potential for eukaryotic phosphatase inhibitors to be repurposed as colistin adjuvants. From a panel of 48 unique structures, we discovered that the natural product kuwanon G breaks colistin resistance, while the non-antimicrobial macrolide ascomycin potentiates colistin in polymyxin-susceptible bacteria.

Plastic binding feature of polymyxins: the effect on MIC susceptibility measurements.

The loss of polycationic antimicrobial peptides, polymyxins, due to adhesion to plastics is an important subject matter that influences in vitro susceptibility testing, including minimum inhibitory concentration (MIC) assays. This review reminds us that this issue can serve as a significant source of variation in the MIC values for polymyxins against Gram-negative bacteria.

In silico design of polycationic antimicrobial peptides active against Pseudomonas aeruginosa and Staphylococcus aureus.

Antimicrobial peptides (AMPs) have the potential to become valuable antimicrobial drugs in the coming years, since they offer wide spectrum of action, rapid bactericidal activity, and low probability for resistance development in comparison with traditional antibiotics. The search and improvement of methodologies for discovering new AMPs to treat resistant bacteria such as Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumannii and Pseudomonas aeruginosa are needed for further development of antimicrobial products. In this work, the software Peptide ID 1.0® was used to find new antimicrobial peptide candidates encrypted in proteins, considering the physicochemical parameters characteristics of AMPs such as positive net charge, hydrophobicity, and sequence length, among others. From the selected protein fragments, new AMPs were designed after conservative and semi-conservative modifications and amidation of the C-terminal region. In vitro studies of the antimicrobial activity of the newly designed peptides showed that two peptides, P3-B and P3-C, were active against P. aeruginosa Escherichia coli and A. baumannii with low minimum inhibitory concentrations. Peptide P3-C was also active against K. pneumoniae and S. aureus. Furthermore, bactericidal activity and information on the possible mechanisms of action are described according to the scanning electron microscopy studies.

Determination of effective charges and ionic mobilities of polycationic antimicrobial peptides by capillary isotachophoresis and capillary zone electrophoresis.

Capillary ITP (CITP) and CZE were applied to the determination of effective charges and ionic mobilities of polycationic antimicrobial peptides (AMPs). Twelve AMPs (deca- to hexadecapeptides) containing three to seven basic amino acid residues (His, Lys, Arg) at variable positions of peptide chain were investigated. Effective charges of the AMPs were determined from the lengths of their ITP zones, ionic mobilities, and molar concentrations, and from the same parameters of the reference compounds. Lengths of the ITP zones of AMPs and reference compounds were obtained from their CITP analyses in cationic mode using leading electrolyte (LE) composed of 10mMNH4 OH, 40mMAcOH (acetic acid), pH 4.1, and terminating electrolyte (TE) containing 40mMAcOH, pH 3.2. Ionic mobilities of AMPs and singly charged reference compounds (ammediol or arginine) were determined by their CZE analyses in the BGE of the same composition as the LE. The effective charges numbers of AMPs were found to be in the range 1.65-5.04, i.e. significantly reduced as compared to the theoretical charge numbers (2.86-6.99) calculated from the acidity constants of the analyzed AMPs. This reduction of effective charge due to tightly bound acetate counterions (counterion condensation) was in the range 17-47% depending on the number and type of the basic amino acid residues in the AMPs molecules. Ionic mobilities of AMPs achieved values (26.5-38.6)×10-9 m2 V-1 s-1 and in most cases were in a good agreement with the ratio of their effective charges and relative molecular masses.

Estimation of acidity constants, ionic mobilities and charges of antimicrobial peptides by capillary electrophoresis.

Capillary electrophoresis (CE) was employed for the determination of thermodynamic acidity constants (pKa ) and actual ionic mobilities of polycationic antimicrobial peptides (AMPs). The effective electrophoretic mobilities of AMPs were measured by CE in a series of the background electrolytes within a wide pH range (2.00-12.25), at constant ionic strength (25 mM) and ambient temperature, using polybrene coated fused silica capillaries to suppress sorption of cationic AMPs to the capillary wall. Eventually, Haarhoff-Van der Linde peak fitting function was used for the determination of correct migration times of some AMPs peaks that were distorted by electromigration dispersion. The measured effective mobilities were corrected to 25°C. Mixed acidity constants, pKa,i mix , and actual ionic mobilities, mi , of AMPs were determined by the nonlinear regression analysis of pH dependence of their effective mobilities. The pKa,i mix values were recalculated to thermodynamic pKa s using the Debye-Hückel theory. Thermodynamic pKa of imidazolium group of histidine residues was found to be in the range 3.72-4.98, pKa of α-NH3+ group was in the range 6.14-6.93, and pKa of ε-NH3+ group of lysine spanned the interval 7.26-9.84, depending on the particular amino acid sequence of the AMPs. Actual ionic mobilities of AMPs with positive charges from one to six elementary units achieved values (9.8 - 36.5) × 10-9 m2 V-1 s-1 .

Overcoming antibiotic resistance in Pseudomonas aeruginosa biofilms using glycopeptide dendrimers.

Antibiotic resistance in the opportunistic pathogen Pseudomonas aeruginosa is partly caused by biofilms forming a physical barrier to antibiotic penetration. Here we focused on modifying tetravalent glycopeptide dendrimer ligands of P. aeruginosa lectins LecB or LecA to increase their biofilm inhibition activity. First heteroglycoclusters were investigated displaying one pair each of LecB specific fucosyl groups and LecA specific galactosyl groups and binding simultaneously to both lectins, one of which gave the first fully resolved crystal structure of a peptide dendrimer as LecB complex providing a structural model for dendrimer-lectin interactions (PDB ; 5D2A). Biofilm inhibition was increased by introducing additional cationic residues in these dendrimers but resulted in bactericidal effects similar to those of non-glycosylated polycationic antimicrobial peptide dendrimers. In a second approach dendrimers displaying four copies of the natural LecB ligand Lewisa were prepared leading to slightly stronger LecB binding and biofilm inhibition. Finally synergistic application of a LecB specific non-bactericidal antibiofilm dendrimer with the antibiotic tobramycin at sub-inhibitory concentrations of both compounds allowed effective biofilm inhibition and dispersal.

Mechanisms of polymyxin resistance: acquired and intrinsic resistance in bacteria.

Polymyxins are polycationic antimicrobial peptides that are currently the last-resort antibiotics for the treatment of multidrug-resistant, Gram-negative bacterial infections. The reintroduction of polymyxins for antimicrobial therapy has been followed by an increase in reports of resistance among Gram-negative bacteria. Some bacteria, such as Klebsiella pneumoniae, Pseudomonas aeruginosa, and Acinetobacter baumannii, develop resistance to polymyxins in a process referred to as acquired resistance, whereas other bacteria, such as Proteus spp., Serratia spp., and Burkholderia spp., are naturally resistant to these drugs. Reports of polymyxin resistance in clinical isolates have recently increased, including acquired and intrinsically resistant pathogens. This increase is considered a serious issue, prompting concern due to the low number of currently available effective antibiotics. This review summarizes current knowledge concerning the different strategies bacteria employ to resist the activities of polymyxins. Gram-negative bacteria employ several strategies to protect themselves from polymyxin antibiotics (polymyxin B and colistin), including a variety of lipopolysaccharide (LPS) modifications, such as modifications of lipid A with phosphoethanolamine and 4-amino-4-deoxy-L-arabinose, in addition to the use of efflux pumps, the formation of capsules and overexpression of the outer membrane protein OprH, which are all effectively regulated at the molecular level. The increased understanding of these mechanisms is extremely vital and timely to facilitate studies of antimicrobial peptides and find new potential drugs targeting clinically relevant Gram-negative bacteria.

Electrostatic modification of the lipopolysaccharide layer: competing effects of divalent cations and polycationic or polyanionic molecules.

The outer membrane (OM) of Gram-negative bacteria is asymmetrical with its outer layer mainly populated with polyanionic lipopolysaccharide (LPS). Much empirical evidence shows how OM permeability can be altered electrostatically: if Mg(2+) or divalent cations are required for the integrity of the OM, antimicrobial peptides (AMPs) or ethylene-diaminetetraacetic acid (EDTA) can permeabilize it. Using a coarse-grained model of the outer LPS layer, in which the layer is viewed as forming discrete binding sites for opposite charges, we study how the LPS layer can be modified electrostatically. In particular, we capture systematically ion-pairing and lateral-charge correlations on the LPS layer. Our results offer a clear picture of (competitive) ion binding onto the LPS layer and its impact on the lateral packing of LPS molecules, similarly to what has been seen in experiments: divalent cations such as Mg(2+) not only neutralize the LPS layer but also make its planar charge distribution heterogeneous, thus tightening the LPS layer; on the other hand, polycationic AMPs or polyanionic EDTA can displace Mg(2+) ions from the LPS layer and counteract the favorable effect of Mg(2+). Our result will be useful for clarifying to what extent OM permeability can be modified electrostatically.

Electrostatics and flexibility drive membrane recognition and early penetration by the antimicrobial peptide dendrimer bH1

Molecular dynamics simulations of the polycationic antimicrobial peptide dendrimer (Leu)8(DapLeu)4(DapPhe)2DapLys-NH2 binding to membranes suggest that electrostatic interactions with the polyanionic lipopolysaccharide (LPS) and conformational flexibility of the 2,3-diaminopropanoic acid (Dap) branching units drive its selective insertion into microbial membranes.

Recombinant expression and purification of the antimicrobial peptide magainin‐2

Magainin-2 (MAG2) is a polycationic antimicrobial peptide isolated from the skin of the African clawed frog Xenopus laevis. It has a wide spectrum of antimicrobial activities against gram-positive and gram-negative bacteria, fungi, and induces osmotic lysis of protozoa. MAG2 also possesses antiviral and antitumoral properties. These activities make this peptide a promising candidate for therapeutic applications. Recombinant expression systems are necessary for the affordable production of large amounts of the biologically active peptide. In this work, MAG2 has been cloned to the N-terminal of a family III carbohydrate-binding module fused to the linker sequence (LK-CBM3) from Clostridium thermocellum; a formic acid recognition site was introduced between the two modules for chemical cleavage of the peptide. The recombinant protein MAG2-LK-CBM3 was expressed in Escherichia coli BL21 (DE3) and MAG2 was successfully cleaved and purified from the fusion partner LK-CBM3. Its functionality was confirmed by testing its activity against gram-negative bacteria.

Structural and antimicrobial properties of human pre-elafin/trappin-2 and derived peptides against Pseudomonas aeruginosa

BackgroundPre-elafin/trappin-2 is a human innate defense molecule initially described as a potent inhibitor of neutrophil elastase. The full-length protein as well as the N-terminal "cementoin" and C-terminal "elafin" domains were also shown to possess broad antimicrobial activity, namely against the opportunistic pathogen P. aeruginosa. The mode of action of these peptides has, however, yet to be fully elucidated. Both domains of pre-elafin/trappin-2 are polycationic, but only the structure of the elafin domain is currently known. The aim of the present study was to determine the secondary structures of the cementoin domain and to characterize the antibacterial properties of these peptides against P. aeruginosa.ResultsWe show here that the cementoin domain adopts an α-helical conformation both by circular dichroism and nuclear magnetic resonance analyses in the presence of membrane mimetics, a characteristic shared with a large number of linear polycationic antimicrobial peptides. However, pre-elafin/trappin-2 and its domains display only weak lytic properties, as assessed by scanning electron micrography, outer and inner membrane depolarization studies with P. aeruginosa and leakage of liposome-entrapped calcein. Confocal microscopy of fluorescein-labeled pre-elafin/trappin-2 suggests that this protein possesses the ability to translocate across membranes. This correlates with the finding that pre-elafin/trappin-2 and elafin bind to DNA in vitro and attenuate the expression of some P. aeruginosa virulence factors, namely the biofilm formation and the secretion of pyoverdine.ConclusionsThe N-terminal cementoin domain adopts α-helical secondary structures in a membrane mimetic environment, which is common in antimicrobial peptides. However, unlike numerous linear polycationic antimicrobial peptides, membrane disruption does not appear to be the main function of either cementoin, elafin or full-length pre-elafin/trappin-2 against P. aeruginosa. Our results rather suggest that pre-elafin/trappin-2 and elafin, but not cementoin, possess the ability to modulate the expression of some P.aeruginosa virulence factors, possibly through acting on intracellular targets.

Effect of lipid composition on buforin II structure and membrane entry

Buforin II is a 21-amino acid polycationic antimicrobial peptide derived from a peptide originally isolated from the stomach tissue of the Asian toad Bufo bufo gargarizans. It is hypothesized to target a wide range of bacteria by translocating into cells without membrane permeabilization and binding to nucleic acids. Previous research found that the structure and membrane interactions of buforin II are related to lipid composition. In this study, we used molecular dynamics (MD) simulations along with lipid vesicle experiments to gain insight into how buforin II interacts differently with phosphatidylcholine (PC), phosphatidylglycerol (PG), and phosphatidylethanolamine (PE) lipids. Fluorescent spectroscopic measurements agreed with the previous assertion that buforin II does not interact with pure PC vesicles. Nonetheless, the reduced entry of the peptide into anionic PG membranes versus neutral PC membranes during simulations correlates with the experimentally observed reduction in BF2 translocation through pure PG membranes. Simulations showing membrane entry into PC also provide insight into how buforin II may initially penetrate cell membranes. Our MD simulations also allowed us to consider how neutral PE lipids affect the peptide differently than PC. In particular, the peptide had a more helical secondary structure in simulations with PE lipids. A change in structure was also apparent in circular dichroism measurements. PE also reduced membrane entry in simulations, which correlates with decreased translocation in the presence of PE observed in previous studies. Together, these results provide molecular-level insight into how lipid composition can affect buforin II structure and function and will be useful in efforts to design peptides with desired antimicrobial and cell-penetrating properties.

Bilayer lipid composition modulates the activity of dermaseptins, polycationic antimicrobial peptides

The primary targets of defense peptides are plasma membranes, and the induced irreversible depolarization is sufficient to exert antimicrobial activity although secondary modes of action might be at work. Channels or pores underlying membrane permeabilization are usually quite large with single-channel conductances two orders of magnitude higher than those exhibited by physiological channels involved, e.g., in excitability. Accordingly, the ion specificity and selectivity are quite low. Whereas, e.g., peptaibols favor cation transport, polycationic or basic peptides tend to form anion-specific pores. With dermaseptin B2, a 33 residue long and mostly alpha-helical peptide isolated from the skin of the South American frog Phyllomedusa bicolor, we found that the ion specificity of its pores induced in bilayers is modulated by phospholipid-charged headgroups. This suggests mixed lipid-peptide pore lining instead of the more classical barrel-stave model. Macroscopic conductance is nearly voltage independent, and concentration dependence suggests that the pores are mainly formed by dermaseptin tetramers. The two most probable single-channel events are well resolved at 200 and 500 pS (in 150 mM NaCl) with occasional other equally spaced higher or lower levels. In contrast to previous molecular dynamics previsions, this study demonstrates that dermaseptins are able to form pores, although a related analog (B6) failed to induce any significant conductance. Finally, the model of the pore we present accounts for phospholipid headgroups intercalated between peptide helices lining the pore and for one of the most probable single-channel conductance.

Lipid-mediated resistance of Gram-negative bacteria against various pore-forming antimicrobial peptides

Lipopolysaccharides (LPSs) play a dual role as target and as effector molecules. The knowledge of the LPS-induced activation of human immune cells is increasing; however, surprisingly, much less effort seems to be directed towards the understanding of the mechanisms leading to the killing of the bacterial organisms, which eventually results in the release of LPS from the bacterial surface into the blood circulation. We demonstrate mechanisms of interaction of peptides of the innate immune system ( e.g. defensins and cathelicidins) as well as of externally administered antibiotics ( e.g. Polymyxin B) with Gram-negative bacteria. The main focus is directed on data derived from electrical measurements on a reconstitution system of the outer membrane as an asymmetric bilayer composed on one side of LPS and on the other of phospholipids. All these antimicrobial peptides (AMPs) are membrane-active and induce the permeabilization of the reconstituted membranes by the formation of lesions. We found that differences in the activity of the AMPs against various sensitive and resistant Gram-negative bacteria can be explained solely by variations in the chemical structure of LPS, e.g. in the composition of the sugar head group. A reduction of the net negative charge of LPS is responsible for a reduced interaction with the polycationic AMPs and thus for resistance. A most important side effect of positively charged AMPs is the neutralization of the negatively charged LPS released from the bacterial surface as a consequence of AMP-induced killing.

Lipid-mediated resistance of Gram-negative bacteria against various pore-forming antimicrobial peptides

Lipopolysaccharides (LPSs) play a dual role as target and as effector molecules. The knowledge of the LPS-induced activation of human immune cells is increasing; however, surprisingly, much less effort seems to be directed towards the understanding of the mechanisms leading to the killing of the bacterial organisms, which eventually results in the release of LPS from the bacterial surface into the blood circulation. We demonstrate mechanisms of interaction of peptides of the innate immune system (e.g. defensins and cathelicidins) as well as of externally administered antibiotics (e.g. Polymyxin B) with Gram-negative bacteria. The main focus is directed on data derived from electrical measurements on a reconstitution system of the outer membrane as an asymmetric bilayer composed on one side of LPS and on the other of phospholipids. All these antimicrobial peptides (AMPs) are membrane-active and induce the permeabilization of the reconstituted membranes by the formation of lesions. We found that differences in the activity of the AMPs against various sensitive and resistant Gram-negative bacteria can be explained solely by variations in the chemical structure of LPS, e.g. in the composition of the sugar head group. A reduction of the net negative charge of LPS is responsible for a reduced interaction with the polycationic AMPs and thus for resistance. A most important side effect of positively charged AMPs is the neutralization of the negatively charged LPS released from the bacterial surface as a consequence of AMP-induced killing.

Characterization of unique amphipathic antimicrobial peptides from venom of the scorpion Pandinus imperator

Two novel antimicrobial peptides have been identified and characterized from venom of the African scorpion Pandinus imperator. The peptides, designated pandinin 1 and 2, are α-helical polycationic peptides, with pandinin 1 belonging to the group of antibacterial peptides previously described from scorpions, frogs and insects, and pandinin 2 to the group of short magainin-type helical peptides from frogs. Both peptides demonstrated high antimicrobial activity against a range of Gram-positive bacteria (2.4–5.2μM), but were less active against Gram-negative bacteria (2.4–38.2μM), and only pandinin 2 affected the yeast Candida albicans. Pandinin 2 also demonstrated strong haemolytic activity (11.1–44.5μM) against sheep erythrocytes, in contrast with pandinin 1, which was not haemolytic. CD studies and a high-resolution structure of pandinin 2 determined by NMR, showed that the two peptides are both essentially helical, but differ in their overall structure. Pandinin 2 is composed of a single α-helix with a predominantly hydrophobic N-terminal sequence, whereas pandinin 1 consists of two distinct α-helices separated by a coil region of higher flexibility. This is the first report of magainin-type polycationic antimicrobial peptides in scorpion venom. Their presence brings new insights into the mode of action of scorpion venom and also opens new avenues for the discovery of novel antibiotic molecules from arthropod venoms.

Bactericidal action of tachyplesin I against oral streptococci.

Tachyplesin I, a polycationic antimicrobial peptide isolated from hemocytes of horseshoe crabs, kills bacteria by disrupting the membrane potential of the cytoplasmic membrane. The present study shows that, among 36 oral streptococcal strains, 12 of 21 Streptococcus sanguis, 3 Streptococcus mutans, 9 Streptococcus salivarius and 3 Streptococcus milleri strains were susceptible to tachyplesin I, whereas 9 S. sanguis strains were resistant. Interestingly, these resistant strains include the clinical isolates from both Kawasaki disease and Behçet patients. According to the time-kill study, tachyplesin I inhibited irreversibly the growth of S. sanguis, S. mutans and S. salivarius strains within 20 min and an S. milleri strain within 80 min. Although it has been suggested that Escherichia coli cultured in rich media were more susceptible to tachyplesin I, the present results show that only 3 S. milleri strains were more sensitized to tachyplesin I in a glucose-supplemented medium, and other tested strains were not. Similarly, only 4 strains were more resistant to tachyplesin I in saline than these were in a rich medium.