Poly Acrylic Acid Research Articles

Janus Membrane-Based Wearable pH Sensor with Sweat Absorption, Gas Permeability, and Self-Adhesiveness.

Wearable biomedical sensors have enabled noninvasive and continuous physiological monitoring for daily health management and early detection of chronic diseases. Among biomedical sensors, wearable pH sensors attracted significant interest, as pH influences most biological reactions. However, conformable pH sensors that have sweat absorption ability, are self-adhesive to the skin, and are gas permeable remain largely unexplored. In this study, we present a pioneering approach to this problem by developing a Janus membrane-based pH sensor with self-adhesiveness on the skin. The sensor is composed of a hydrophobic polyurethane-polydimethylsiloxane porous hundreds nanometer-thick substrate and a hydrophilic poly(vinyl alcohol)-poly(acrylic acid) porous nanofiber layer. This Janus membrane exhibits a thickness of around 10 μm, providing a conformable adhesion to the skin. The simultaneous realization of solution absorption, gas permeability, and self-adhesiveness makes it suitable for long-term continuous monitoring without compromising the comfort of the wearer. The pH sensor was tested successfully for continuous monitoring for 7.5 h, demonstrating its potential for stable analysis of skin health conditions. The Janus membrane-based pH sensor holds significant promise for comprehensive skin health monitoring and wearable biomedical applications.

Hybrid Water-Harvesting Channels Delivering Wide-Range and Supersensitive Passive Fluorescence Humidity Sensors.

The development of optical humidity detection has been of considerable interest in highly integrated wearable electronics and packaged equipment. However, improving their capacities for color recognition at ultralow humidity and response-recovery rate remains a significant challenge. Herein, we propose a type of hybrid water-harvesting channel to construct brand-new passive fluorescence humidity sensors (PFHSs). Specifically, the hybrid water-harvesting channels involve porous metal-organic frameworks and a hydrophilic poly(acrylic acid) network that can capture water vapors from the ambient environment even at ultralow humidity, into which polar-responsive aggregation-induced emission molecules are doped to impart humidity-sensitive luminescence colors. As a result, the PFHSs exhibit clearly defined fluorescence signals within 0-98% RH coupling with desirable performances such as a fast response rate, precise quantitative feedback, and durable reversibility. Given the flexible processability of this system, we further upgrade the porous structure via electrostatic spinning to furnish a kind of Nano-PFHSs, demonstrating an impressive response time (<100 ms). Finally, we validate the promising applications of these sensors in electronic humidity monitoring and successfully fabricate a portable and rapid humidity indicator card.

The first reported values of microplastics in prostate

BackgroundMicroplastics are ubiquitous, widespread environmental pollutants with unavoidable human exposure. Herein, it was aimed to investigate the presence of microplastics in prostate tissue.MethodsProstate tissues from 12 patients who underwent Trans Urethral Resection of the Prostate (TUR-P) were analyzed to investigate the presence of microplastics. Initially, the prostate tissues were analyzed for microplastic particles using a light microscope after extraction. Subsequently, the chemical composition of the particles found in the prostate tissues was characterized using Attenuated Total Reflection-Fourier Transform Infrared (ATR-FTIR) spectrophotometry.ResultsMicroplastic particles of various types were detected in 6 out of 12 patients. All detected plastic particles in this study were microplastics, with sizes below 26 μm in size. These microplastics exhibited different shapes as pellets, spheres or fibers. Overall, among the 12 analyzed prostate tissue samples, four different types of plastic were identified in six samples. The most common type of microplastic detected was Polyamide (Nylon 6), found in samples from three patients. Other detected types, Polypropylene, Polyacrylic Acid and Poly (dimethylsiloxane) were each determined in samples from one patient.ConclusionsThis is the first study to demonstrate the presence of microplastics in prostate tissue, serving as an exploratory investigation, which can trigger further research to validate the results in a larger patient cohort.

A Study on the Dilational Modulus Measurement of Polyacrylic Acid Films at Air–Water Interface by Pendant Bubble Tensiometry

The dilational modulus (E) of polymer films has been commonly measured using the oscillating ring/bubble/drop methods with an external force, and often without specifying the state of the adsorbed film. This study explores an approach where E was determined from the relaxations of surface tension (ST) and surface area (SA) of natural perturbations, in which ST and SA were monitored using a pendant bubble tensiometer. The E of the adsorbed film of PAA (polyacrylic acid) was evaluated for aqueous solutions at CPAA = 5 × 10−4 g/cm3, [MW = 5, 25, and 250 (kDa)]. The E (=dγ/dlnA) was estimated from the surface dilational rate (dlnA/dt) and the rate of ST change (dγ/dt) of the bubble surface from the natural perturbation caused by minute variations in ambient temperature. The data revealed that (i) a considerable time is required to reach the equilibrium-ST (γeq) and to attain the saturated dilational modulus (Esat) of the adsorbed PAA film, (ii) both γeq and Esat of PAA solutions increase with MW of PAA, (iii) a lower MW solution requires a longer time to reach its γeq and Esat, and (iv) this approach is workable for evaluating the E of adsorbed polymer films.

Bioinspired Photoelectronic Synergy Coating with Antifogging and Antibacterial Properties.

Optically transparent glass with antifogging and antibacterial properties is in high demand for endoscopes, goggles, and medical display equipment. However, many of the previously reported coatings have limitations in terms of long-term antifogging and efficient antibacterial properties, environmental friendliness, and versatility. In this study, inspired by catfish and sphagnum moss, a novel photoelectronic synergy antifogging and antibacterial coating was prepared by cross-linking polyethylenimine-modified titanium dioxide (PEI-TiO2), polyvinylpyrrolidone (PVP), and poly(acrylic acid) (PAA). The as-prepared coating could remain fog-free under hot steam for more than 40 min. The experimental results indicate that the long-term antifogging properties are due to the water absorption and spreading characteristics. Moreover, the organic-inorganic hybrid of PEI and TiO2 was first applied to enhance the antibacterial performance. The Staphylococcus aureus and the Escherichia coli growth inhibition rates of the as-prepared coating reached 97 and 96% respectively. A photoelectronic synergy antifogging and antibacterial mechanism based on the positive electrical and photocatalytic properties of PEI-TiO2 was proposed. This investigation provides insight into designing multifunctional bioinspired surface materials to realize antifogging and antibacterial that can be applied to medicine and daily lives.

Coordination interaction based two-dimensional photonic crystal polyacrylic acid hydrogel material for sensitive and visual detection of uranyl ion in water

Coordination interaction based two-dimensional photonic crystal polyacrylic acid hydrogel material for sensitive and visual detection of uranyl ion in water

Stabilizing the Bulk-Phase and Solid Electrolyte Interphase of Silicon Microparticle Anode by Constructing Gradient-Hierarchically Ordered Conductive Networks.

The poor bulk-phase and interphase stability, attributable to adverse internal stress, impede the cycling performance of silicon microparticles (µSi) anodes and the commercial application for high-energy-density lithium-ion batteries. In this work, a groundbreaking gradient-hierarchically ordered conductive (GHOC) network structure, ingeniously engineered to enhance the stability of both bulk-phase and the solid electrolyte interphase (SEI) configurations of µSi, is proposed. Within the GHOC network architecture, two-dimensional (2D) transition metal carbides (Ti3C2Tx) act as a conductive "brick", establishing a highly conductive inner layer on µSi, while the porous outer layer, composed of one-dimensional (1D) Tempo-oxidized cellulose nanofibers (TCNF) and polyacrylic acid (PAA) macromolecule, functions akin to structural "rebar" and "concrete", effectively preserves the tightly interconnected conductive framework through multiple bonding mechanisms, including covalent and hydrogen bonds. Additionally, Ti3C2Tx enhances the development of a LiF-enriched SEI. Consequently, the µSi-MTCNF-PAA anode presents a high discharge capacity of 1413.7 mAh g-1 even after 500 cycles at 1.0 C. Moreover, a full cell, integrating LiNi0.8Mn0.1Co0.1O2 with µSi-MTCNF-PAA, exhibits a capacity retention rate of 92.0% following 50 cycles. This GHOC network structure can offer an efficacious pathway for stabilizing both the bulk-phase and interphase structure of anode materials with high volumetric strain.

Biomimetic Remineralization of Artificial Caries Lesions with a Calcium Coacervate, Its Components and Self-Assembling Peptide P11-4 In Vitro

The application of calcium coacervates (CCs) may hold promise for dental hard tissue remineralization. The aim of this study was to evaluate the effect of the infiltration of artificial enamel lesions with a CC and its single components including polyacrylic acid (PAA) compared to that of the self-assembling peptide P11-4 in a pH-cycling (pHC) model. Enamel specimens were prepared from bovine incisors, partly varnished, and stored in demineralizing solution (DS; pH 4.95; 17 d) to create two enamel lesions per sample. The specimens were randomly allocated to six groups (n = 15). While one lesion per specimen served as the no-treatment control (NTC), another lesion (treatment, T) was etched (H3PO4, 5 s), air-dried and subsequently infiltrated for 10 min with either a CC (10 mg/mL PAA, 50 mM CaCl2 (Ca) and 1 M K2HPO4 (PO4)) (groups CC and CC + DS) or its components PAA, Ca or PO4. As a commercial control, the self-assembling peptide P11-4 (CurodontTM Repair, Credentis, Switzerland) was tested. The specimens were cut perpendicularly to the lesions, with half serving as the baseline (BL) while the other half was exposed to either a demineralization solution for 20 d (pH 4.95; group CC + DS) or pHC for 28 d (pH 4.95, 3 h; pH 7, 21 h; all five of the other groups). The difference in integrated mineral loss between the lesions at BL and after the DS or pHC, respectively, was analyzed using transversal microradiography (ΔΔZ = ΔZpHC − ΔZbaseline). Compared to the NTC, the mineral gain in the T group was significantly higher in the CC + DS, CC and PAA (p &lt; 0.05, Wilcoxon). In all of the other groups, no significant differences between treated and untreated lesions were detected (p &gt; 0.05). Infiltration with the CC and PAA resulted in a consistent mineral gain throughout the lesion body. The CC as well as its component PAA alone promoted the remineralization of artificial caries lesions in the tested pHC model. Infiltration with PAA further resulted in mineral gain in deeper areas of the lesion body.

SPAN secondary particles enabled high energy density Lithium-Sulfur battery

High-areal-capacity electrodes and lean electrolyte are practical approaches for batteries to enhance their energy density, while it’s challenge for the lithium-sulfur batteries using nano-sized sulfurized polyacrylonitrile (SPAN) cathodes due to the sluggish charge transportation. Here, a spray-drying (SD) technique for mass production of micron-sized SPAN secondary particles (PC-SPAN) with composite coating is proposed. The composite involves polydopamine (PDA), polyacrylic acid (PAA) and polyvinyl alcohol (PVA) that physiochemically crosslinking. The rich catecholamine, hydroxyl and carboxyl groups not only construct strong and flexible adhesion among the SPAN primary particles to keep the electrode integrity, but also render built-in ion passage within the secondary particles to allow the electrode working under lean electrolyte condition. Consequently, PC-SPAN electrode with a high areal loading of 8.4 mg cm−2 delivers a higher specific capacity of 547.4 mAh g−1 at 0.3C when that of SPAN is less than 400.0 mAh g−1. In the meantime, prototype Li-SPAN battery with high energy density of 530.2 Wh kg−1 is achieved using PC-SPAN electrode with an areal capacity of 19.1 mAh cm−2 and low electrolyte/SPAN ratio of 0.93 μL mg−1, which demonstrates the feasibility of this strategy toward applicable high energy LSBs.

Trypsin Encapsulation in the Zeolitic Imidazolate Framework for Low-Molecular Weight Protein Analysis with High Selectivity and Efficiency.

Low-molecular weight proteins (LWPs) are important sources of biological information in biomarkers, signaling molecules, and pathology. However, the separation and analysis of LWPs in complex biological samples are challenging, mainly due to their low abundance and the complex sample pretreatment procedure. Herein, trypsin modified by poly(acrylic acid) (PAA) was encapsulated by a zeolitic imidazolate framework (ZIF-L). Mesopores were formed on the ZIF-L with the introduction of PAA. An alternative strategy for separation and pretreatment of LWPs was developed based on the prepared ZIF-L-encapsulated trypsin with adjustable pore size. The mesoporous structure of the prepared materials selectively excluded high-molecular weight proteins from the reaction system, allowing LWPs to enter the pores and react with the internal trypsin, resulting in an improved separation efficiency. The hydrophobicity of the ZIF-L simplified the digestion process by inducing significant structural changes in substrate proteins. In addition, the enzymatic activity was significantly enhanced by the developed encapsulation method that maintained the enzyme conformation, allowed low mass transfer resistance, and possessed a high enzyme-to-substrate ratio. As a result, the ZIF-L-encapsulated trypsin can achieve highly selective separation, valid denaturation, and efficient digestion of LWPs in a short time by simply mixing with substrate proteins, greatly simplifying the separation and pretreatment process of the traditional hydrolysis method. The prepared materials and the developed strategy demonstrated an excellent size-selective assay performance in model protein mixtures, showing great potential in the application of proteomics analysis.

Study of binder effect on the lithium storage kinetics of copper phosphide nanotube anode

Copper phosphide (CP) stands out as a promising anode material for lithium-ion batteries due to its high theoretical capacity (1281 mAh g−1). However, the fast capacity decay of copper phosphide poses a significant challenge due to its huge volume change. Optimization of binder selection presents an effective way to harness the high lithium storage capacity of copper phosphide. In this study, copper phosphide nanotubes were synthesized using a hard template transformation method. The following investigation delved into the impact of different binders on the electrode structure and the lithium-ion storage performance of copper phosphide. Notably, employing polyacrylic acid (PAA) as a binder resulted in a stable capacity of 526.8 mAh g−1 over 400 cycles at 100 mA g−1 for the copper phosphide electrode. The remarkable lithium-ion storage property of the CP-PAA electrode is ascribed to the robust interaction between PAA and the P–O bond on the copper phosphide surface. This interaction not only mitigated volume expansion but also enhanced the kinetics of electrochemical reactions.

Accelerated hydrolysis and degradation of polylactide nanocomposites using loaded silica nanocarriers

Polylactide (PLA) stands as a prominent commodity biodegradable polymer, yet its inherent slow biodegradation under certain conditions has been a persistent challenge. This study introduces a general approach for enhancing the biodegradation of PLA by employing silica nanoparticles (SiNPs) loaded with diverse cargoes. The SiNPs with diameters of ca. 100 nm are synthesized through a sol–gel process in an inverse microemulsion, enabling in situ loading with functional cargoes such as poly(acrylic acid), lignosulfonate, and chitosan. Surface grafting with PLA (PLA-grafted SiNPs) serves to prevent aggregation, thereby enhancing the dispersion of nanoparticles within the PLA matrix and improving composite properties preventing depletion. Lignin-loaded SiNPs demonstrate the capability to block UV light and enhance antioxidant activity in the composite compared to neat PLA. Notably, SiNPs loaded with poly(acrylic acid) and chitosan exhibit the capacity to accelerate PLA hydrolysis in aqueous environments, while lignin as cargo results in faster composting with an increased weight loss of ca. 20 wt% compared to neat PLA at only 1 wt% loading of SiNPs. This research outlines a versatile strategy utilizing SiNPs to address the slow biodegradation profile of PLA, offering valuable insights and a promising avenue for advancing the environmental sustainability of degradable polyester-based materials in diverse applications.

Synthesis of carboxymethyl starch co (polyacrylamide/ polyacrylic acid) hydrogel for removing methylene blue dye from aqueous solution

Natural polysaccharides, notably starch, have garnered attention for their accessibility, cost-effectiveness, and biodegradability. Modifying starch to carboxymethyl starch enhances its solubility, swelling capacity, and adsorption efficiency. This research examines the synthesis of an effective hydrogel adsorbent based on carboxymethyl starch for the elimination of methylene blue from aqueous solutions. The hydrogel was synthesized using polyacrylamide and polyacrylic acid as monomers, ammonium persulfate as the initiator, and N,N′-methylenebisacrylamide as the cross-linker. Through FESEM, swelling morphology was evaluated in both distilled water and methylene blue dye. The adsorption data elucidated that the adsorption capacity of the hydrogel significantly depends on the dosage of the adsorbent, pH, and concentration of the MB dye. At a pH of 7 and a dye concentration of 250 mg/L, the hydrogel exhibited an impressive 95 % removal rate for methylene blue. The results indicate that the adsorption process follows pseudo-second-order kinetics and conforms well to the Langmuir adsorption isotherm, indicating a maximum adsorption capacity of 1700 mg/g. According to the pseudo-second-order kinetic model and FTIR analysis, methylene blue chemisorbs to the adsorbent material. Hydrogel absorbents regulate adsorption through both intra-particle diffusion and liquid film diffusion. These results highlight the potential of the new hydrogel absorber for water purification.

One-step soaking strategy toward mechanobiological double-network hydrogel with improving chondrogenesis capacity

Cartilage tissue engineering (CTE) is a promising strategy for addressing the persistent challenges in healing articular cartilage defects in the clinic, aiming to manufacture scaffolds with ideal mechanical characteristics that can provide a conducive microenvironment for the reconstruction or replacement of damaged cartilage defects. Easy operation, excellent mechanical strength, remarkable biocompatibility, and inherent capacity to promote cartilage formation are essential in CTE. This study designed a mechanobiological double-network (DN) hydrogel (KCS-PAA-Mn2+) through a one-step soaking strategy of immersing the composite hydrogel (KCS-PAA) of kartogenin (KGN)-conjugated short-chain chitosan (CS) covalent with polyacrylic acid (PAA) in manganese chloride (MnCl2) solution. Due to the strong physical interactions of CS chain-entanglement network and carboxylate-Mn2+ complex inducing polymer aggregation state transitions, the KCS-PAA-Mn2+ DN hydrogel exhibited exceptional mechanical characteristics, such as high tensile property (strength: 0.24 MPa at a strain of 552 %; toughness: 0.66 MPa), compressibility (strength: 51.98 MPa at a strain of 95 %; compressive modulus: 0.09 MPa), controllable swelling behavior (~327 %), and sustained drug release (>2 weeks). Moreover, in vitro biological studies demonstrated that the KCS-PAA-Mn2+ DN hydrogel not only promoted cell growth and proliferation but also enhanced the expression of genes specific to cartilage and the release of cartilage extracellular matrix (ECM) by bone mesenchymal stem cells (BMSCs), thus enabling a continuous concentration for a long period and persistently enhancing its chondrogenic efficiency. Overall, this soaking methodology reported here is universal to construct mechanically bioactive scaffolds that could expand their bio-applicability with simultaneous advantages of mechanical supports, tailorable swelling, sustainable drug release and long-lasting biological function, thus facilitating the advancement of cartilage-engineered hydrogel biomaterials to a higher level.

STMP and PVPA as Templating Analogs of Noncollagenous Proteins Induce Intrafibrillar Mineralization of Type I Collagen via PCCP Process.

The phosphorylated noncollagenous proteins (NCPs) play a vital role in manipulating biomineralization, while the mechanism of phosphorylation of NCPs in intrafibrillar mineralization of collagen fibril has not been completely deciphered. Poly(vinylphosphonic acid) (PVPA) and sodium trimetaphosphate (STMP) as templating analogs of NCPs induce hierarchical mineralization in cooperation with indispensable sequestration analogs such as polyacrylic acid (PAA) via polymer-induced liquid-like precursor (PILP) process. Herein, STMP-Ca and PVPA-Ca complexes are proposed to achieve rapid intrafibrillar mineralization through polyelectrolyte-Ca complexes pre-precursor (PCCP) process. This strategy is further verified effectively for remineralization of demineralized dentin matrix both in vitro and in vivo. Although STMP micromolecule fails to stabilize amorphous calcium phosphate (ACP) precursor, STMP-Ca complexes facilely permeate into intrafibrillar interstices and trigger phase transition of ACP to hydroxyapatite within collagen. In contrast, PVPA-stabilized ACP precursors lack liquid-like characteristic and crystallize outside collagen due to rigid conformation of PVPA macromolecule, while PVPA-Ca complexes infiltrate into partial intrafibrillar intervals under electrostatic attraction and osmotic pressure as evidenced by intuitionistic 3D stochastic optical reconstruction microscopy (3D-STORM). The study not only extends the variety and size range of polyelectrolyte for PCCP process but also sheds light on the role of phosphorylation for NCPs in biomineralization.

Nanoarchitectonics and electrocatalytic properties of platinum nanoparticles in weak polyelectrolytes‐based multilayer thin films

AbstractIn this study, the electrocatalytic behavior of platinum (Pt) nanoparticles (NPs) in a novel multilayered thin film is investigated for proton exchange membrane fuel cells (PEMFC) applications. The multilayer thin films are assembled by the alternate deposition of branched polyethylenimine (BPEI) and poly(acrylic acid) (PAA) from aqueous solutions through a layer‐by‐layer (LbL) technique. Two extreme assembly pH conditions critically influence the films' physical and morphological characteristics, subsequently affecting their electrochemical behavior. Manipulation of the assembly pH modifies the charge density of the weak polyelectrolytes (BPEI and PAA), leading to variations in physical, structural, and electrochemical properties. The LbL thin films assembled at a pH of 9.5 for BPEI and 4.5 for PAA exhibit significantly greater thickness compared to the same film with all components deposited at pH 4.5. This is attributed to in‐and‐out diffusion of the partially charged polyelectrolytes with coiled polymeric conformation (BPEI at pH 9.5 and PAA at pH 4.5). As‐assembled LbL thin films are used as nanoreactors for the deposition of Pt NPs. The nanoscale control over polymeric conformation and charge density significantly influences electrocatalytic performance. 9.5BPEI/4.5PAA thin films exhibit higher electrocatalytic activity relative to 4.5BPEI/4.5PAA systems. This improved performance in 9.5BPEI/4.5PAA multilayers is ascribed to the fact that more carboxylic acid groups of PAA are coated in an exponentially grown behavior, which provides more active sites available for Pt NPs to be deposited. The multilayer thin films containing uniformly dispersed Pt NPs can be an attractive and advanced hybrid electrode material with great promise for the proton exchange membrane fuel cells.

Grapefruit-Inspired Polymeric Capsule with Hierarchical Microstructure: Advanced Nanomaterial Carrier Platform for Energy Storage, Drug Delivery, Catalysis, and Environmental Applications.

Efficient support materials are crucial for maximizing the efficacy of nanomaterials in various applications such as energy storage, drug delivery, catalysis, and environmental remediation. However, traditional supports often hinder nanomaterial performance due to their high weight ratio and limited manageability, leading to issues like tube blocking and secondary pollution. To address this, a novel grapefruit-inspired polymeric capsule (GPC) as a promising carrier platform is introduced. The millimeter-scale GPC features a hydrophilic shell and an internal hierarchical microstructure with 80% void volume, providing ample space for encapsulating diverse nanomaterials including metals, polymers, metal-organic frameworks, and silica. Through liquid-phase bottom-up methods, it is successfully loaded Fe2O3, SiO2, polyacrylic acid, and Prussian blue nanomaterials onto the GPC, achieving high mass ratio (1776, 488, 898, and 634wt.%, respectively). The GPC shell prevents nanomaterial leakage and the influx of suspended solids, while its internal framework enhances structural stability and mass transfer rates. With long-term storage stability, high carrying capacity, and versatile applicability, the GPC significantly enhances the field applicability of nanomaterials.

Effect of strong and weak polyelectrolytes on the properties of cationic surfactant with triallyl ammonium head group: Self-assembly and biological assessment

Comprehensive assessment of polymer-colloid systems based on cationic surfactant with triallyl ammonium head group (TAS-16) in the presence of synthetic polyelectrolytes (polyacrylic acid (PAA), sodium polyacrylate (SPA), and sodium polystyrene sulfonate (PSS)) has been carried out. The addition of weak polyelectrolyte PAA significantly reduces the critical micelle concentration of the amphiphile up to 50 times. In conrtrast, strong polyelectrolytes such as PSS and SPA have a much smaller effect on the aggregation threshold of the surfactant. Spherical aggregates with a diameter of 80-230 nm were observed in the surfactant-PAA system using transmission electron microscopy. The mixed compositions exhibited high antitumor activity against the human duodenal adenocarcinoma HuTu 80 cell line (IC50=0.6 μM). The pure polymers do not cause hemolysis and hemagglutination, while TAS-16 exhibits hemolytic activity in both pure and mixed systems. The polymer-colloid complexes containing strong polyelectrolyte SPA were more effective as nanocontainers to enhance the solubility of the hydrophobic antibiotic Amphotericin B.

Conductive chitosan/polyaniline hydrogel: A gas sensor for room-temperature electrochemical hydrogen sensing

Hydrogen (H2) has been deemed a source of energy for both stationary and mobile applications to contribute to lowering carbon emissions due to its abundance (which can be extracted from various compounds), environmental friendliness, and high energy density. However, H2 gas is highly flammable and has a fast burning rate. Consequently, the need to ensure human safety and environmental preservation necessitates the development of hydrogen sensors that exhibit heightened sensitivity, a reduced detection threshold, and quick response times. Herein, we present the synthesis of a ternary hydrogel composite, chitosan-crosslinked poly(acrylic acid)-based polyaniline hydrogel (Cs-cl-pAA/PANI), which was developed to function as a cathode material in hydrogen sensing applications. The structural and optical properties of ternary cathode materials were evaluated using various analytical techniques, and hydrogen sensing was studied using electrochemical techniques. The electrochemical sensing characteristics of the hydrogel matrix were improved by including polyaniline (PANI) as a result of the overlapping of localised π-electrons in the p-orbitals. The sensitivity of the Cs-cl-pAA/PANI hydrogel was determined to be 48.7845 μA M, with a reaction time of 0.6s, recovery time of 2s, and detection limit of 3.682 μM. The sensor also exhibited outstanding restoration and repeatability.

Fabrication and evaluation of stable amorphous polymer-drug composite particles via a nozzle-free ultrasonic nebulizer

We present a promising method for producing amorphous drug particles using a nozzle-free ultrasonic nebulizer with polymers, specifically polyvinylpyrrolidone (PVP), poly(acrylic acid) (PAA), and Eudragit® S 100 (EUD). Model crystalline phase drugs–Empagliflozin, Furosemide, and Ilaprazole–are selected. This technique efficiently produces spherical polymer-drug composite particles and demonstrates enhanced stability against humidity and thermal conditions, compared to the drug-only amorphous particles. The composite particles exhibit improved water dissolution compared to the original crystalline drugs, indicating potential bioavailability enhancements. While there are challenges, including the need for continuous water supply for ultrasonic component cooling, dependency on the solubility of polymers and drugs in volatile organic solvents, and mildly elevated temperatures for solvent evaporation, our method offers significant advantages over traditional approaches. It provides a straightforward, flexible process adaptable to various drug-polymer combinations and consistently yields spherical amorphous solid dispersion (ASD) particles with a narrow size distribution. These attributes make our method a valuable advancement in pharmaceutical drug formulation and delivery.