PVDF Research Articles

A facile and scalable fabrication procedure for PVDF-PDA/PEI/SiO2 hollow fiber composite ultrafiltration membranes: Integration of co-deposition and cross-linking

Polyvinylidene fluoride (PVDF) membranes, widely used for their stability, face limitations due to the hardly adjustable pore size in nanoscale and inherent hydrophobicity. To address this, we proposed a co-deposition method incorporating dopamine (DA), polyethyleneimine (PEI), and silicon dioxide (SiO2) nanoparticles with glutaraldehyde cross-linking for precise regulation of pore size and hydrophilicity in PVDF hollow fiber membranes. Notably, the pore diameter reduced from 119.0 ± 3.55 nm to 18.4 ± 0.36 nm, while the contact angle decreased from 107.7° to 40.9°. This simultaneous regulation led to a high-performance PDA/PEI/SiO2-PVDF hydrophilic ultrafiltration membrane with a rejection rate exceeding 99% for 20 nm nanoparticles in a long-term simulated separation experiment while achieving a significant protein permeability of 97% in BSA permeation experiments. Additionally, the membrane demonstrated exceptional long-term stability, offering a novel approach for tuning the performance of ultrafiltration/microfiltration membranes.

Description of non-ideal effects in composite membranes by a new theoretical approach

In present study, a theoretical model is introduced to calculate the gas permeability of mixed matrix membranes (MMMs) containing porous fillers. This model is based on analogy of gas permeation in MMMs with tensile modulus in composites. The representative parameters of MMM morphologies such as polymer chains tightening around the filler (β<1), unselective channel formation (β>1) and polymer chains penetrating into filler pores (0≤α≤1) which leads to the filler pore blocking are all included in the model. Furthermore, the interphase thickness (t) which is a critical parameter of MMMs participates in calculation equation along with the other parameters. To validate the proposed model, an experimental study with poly(vinylidene fluoride) (PVDF)/poly(methyl methacrylate) (PMMA) blend as polymer matrix and zeolite 4A and NH2-MOF-199 as fillers is performed. The obtained gas permeability data of constructed MMMs and some of the literature data are employed to be fitted with the proposed model. The details of the existence morphologies of MMMs can be described by earning the mentioned parameters ranges. Therefore, by this model, by having a measure of t, the gas permeation of MMM can be achieved accompany with details of the related morphologies. All the theoretical investigations are done utilizing one equation which contains all parameters simultaneously.

Electrospun Membranes Based on Quaternized Polysulfones: Rheological Properties–Electrospinning Mechanisms Relationship

Composite membranes based on a polymer mixture solution of quaternized polysulfone (PSFQ), cellulose acetate phthalate (CAP), and polyvinylidene fluoride (PVDF) for biomedical applications were successfully obtained through the electrospinning technique. To ensure the polysulfone membranes’ functionality in targeted applications, the selection of electrospinning conditions was essential. Moreover, understanding the geometric characteristics and morphology of fibrous membranes is crucial in designing them to meet the performance standards necessary for future biomedical applications. Thus, the viscosity of the solutions used in the electrospinning process was determined, and the morphology of the electrospun membranes was examined using scanning electron microscopy (SEM). Investigations on the surfaces of electrospun membranes based on water vapor sorption data have demonstrated that their surface properties dictate their biological ability more than their specific surfaces. Furthermore, in order to understand the different macromolecular rearrangements of membrane structures caused by physical interactions between the polymeric chains as well as by the orientation of functional groups during the electrospinning process, Fourier transform infrared (FTIR) spectroscopy was used. The applicability of composite membranes in the biomedical field was established by bacterial adhesion testing on the surface of electrospun membranes using Escherichia coli and Staphylococcus aureus microorganisms. The biological experiments conducted establish a foundation for future applications of these membranes and validate their effectiveness in specific fields.

A Narrative Review of In‐Textile Sensors in Human Health Applications

AbstractSensors have become more versatile and sophisticated in recent years to fulfill the increasing demands for human health applications. Physiological information such as electrocardiogram, pulse rate, and respiration are essential indications of personal health, often collected as vitals, which are typically collected from medical‐grade electrocardiogram (ECG) machines. In‐textile sensors are a fast‐growing sub‐category of wearable sensors embedded in smart textiles to acquire physiological information and movement index and provide harmful chemical warnings without compromising the comfortable nature of clothing. Recent literature has shown that integrating new materials has greatly improved the stability, specificity, and selectivity of in‐textile sensors. For example, polyvinylidene fluoride nanofiber produced a highly stretchable sensor to measure ECG readings during movement without losing data quality. This review discusses a group of nanomaterial‐based in‐textile sensors for consumer use in the home, workplace, and healthcare environments. This review will focus on exploring and analyzing the latest developments in these nanomaterial‐based e‐textiles due to their ability to be more easily integrated for daily use and their great potential for medical applications. Future work will be necessary to incorporate recycled materials, improve the method of powering these sensors, and ultimately refine the designs to be appropriate for more sustainable use.

CuFeS2/MXene-Modified Polyvinylidene Fluoride Membrane for Antibiotics Removal through Peroxymonosulfate Activation

In this research, the CuFeS2/MXene-modified polyvinylidene fluoride (PVDF) membrane was prepared to activate peroxymonosulfate (PMS) to remove moxifloxacin (MOX) and its morphology; surface functional groups and hydrophilicity were also studied. The parameters of the catalytic membrane/PMS system were optimized, with an optimal loading of 4 mg/cm2 and a PMS dosage of 0.20 mM. High filtration pressure, alkaline conditions, and impurities in water could inhibit MOX removal. After continuous filtration, the removal efficiency of MOX using the catalytic membrane/PMS system and PVDF membrane was 68.2% and 9.9%, respectively. Batch filtration could remove 87.8% MOX by the extra 10 min contact time between the catalytic membrane and solution. During the filtration process, CuFeS2/MXene on the surface of the catalytic membrane activated PMS to produce SO4•−, HO•, and 1O2, and MOX was removed through adsorption and degradation. Taking humic acid (HA) as the model foulant, reversible fouling resistance in the catalytic membrane/PMS system was 22.8% of the PVDF membrane. The catalytic membrane/PMS system weakened the formation of the cake layer by oxidizing HA into smaller pollutants and followed the intermediate blocking cake filtration model. The novelty of this research was to develop a CuFeS2/MXene–PVDF membrane-activated PMS system and explore its application in antibiotics removal.

Enhancing the DNA yield intended for microbial sequencing from a low-biomass chlorinated drinking water

DNA extraction yield from drinking water distribution systems and premise plumbing is a key metric for any downstream analysis such as 16S amplicon or metagenomics sequencing. This research aimed to optimize DNA yield from low-biomass (chlorinated) reverse osmosis-produced tap water by evaluating the impact of different factors during the DNA extraction procedure. The factors examined are (1) the impact of membrane materials and their pore sizes; (2) the impact of different cell densities; and (3) an alternative method for enhancing DNA yield via incubation (no nutrient spiking). DNA from a one-liter sampling volume of RO tap water with varying bacterial cell densities was extracted with five different filter membranes (mixed ester cellulose 0.2 μm, polycarbonate 0.2 μm, polyethersulfone 0.2 and 0.1 μm, polyvinylidene fluoride 0.1 μm) for biomass filtration. Our results show that (i) smaller membrane pore size solely did not increase the DNA yield of low-biomass RO tap water; (ii) the DNA yield was proportional to the cell density and substantially dependent on the filter membrane properties (i.e., the membrane materials and their pore sizes); (iii) by using our optimized DNA extraction protocol, we found that polycarbonate filter membrane with 0.2 μm pore size markedly outperformed in terms of quantity (DNA yield) and quality (background level of 16S gene copy number) of recovered microbial DNA; and finally, (iv) for one-liter sampling volume, incubation strategy enhanced the DNA yield and enabled accurate identification of the core members (i.e., Porphyrobacter and Blastomonas as the most abundant indicator taxa) of the bacterial community in low-biomass RO tap water. Importantly, incorporating multiple controls is crucial to distinguish between contaminant/artefactual and true taxa in amplicon sequencing studies of low-biomass RO tap water.

Synergetic Improvement of Flexoelectric Coefficient in Liquid Crystal Embedded Flexible PVDF Polymer Composite for Energy Harvesting Applications.

Flexoelectricity is the universal electric polarization of dielectrics upon exertion of a non-uniform strain gradient. With the advancement of nano-technology and miniaturization of electronic devices, flexoelectricity holds the promise to address the power requirements for such device operation. The direct flexoelectric effect in liquid crystal (LC) embedded poly(vinylidene fluoride) (PVDF) polymer films is examined for the first time by the application of external strain on the films. Physical characterizations such as Differential Scanning Calorimetry (DSC), dielectric spectroscopy, X-ray diffraction, and field emission scanning electron microscopy (FESEM) are carried out to study the composite films' intrinsic and extrinsic properties like dielectric, crystallinity, and morphologies. The value of the flexoelectric coefficient (μ12) increases with the concentration of LC incorporation. At 3wt%, μ12 attains a maximum value of 68nCm-1, which is more than a threefold increase compared to that of the pure PVDF film. The role of Maxwell-Wagner-Sillars (MWS) polarization in determining flexoelectric polarization in polymer composites is also discussed. Moreover, the influence of the microstructure and domain size formation in determining the flexoelectric response are discussed in detail to infer the behavior of the flexoelectric coefficients of the films. Potential device applications based on this phenomenon have been proposed for future research in sensing and actuation.

Challenges and opportunities in piezoelectric polymers: Effect of oriented amorphous fraction in ferroelectric semicrystalline polymers

AbstractDespite extensive research on piezoelectric polymers since the discovery of piezoelectric poly(vinylidene fluoride) (PVDF) in 1969, the fundamental physics of polymer piezoelectricity has remained elusive. Based on the classic principle of piezoelectricity, polymer piezoelectricity should originate from the polar crystalline phase. Surprisingly, the crystal contribution to the piezoelectric strain coefficient d31 is determined to be less than 10%, primarily owing to the difficulty in changing the molecular bond lengths and bond angles. Instead, &gt;85% contribution is from Poisson's ratio, which is closely related to the oriented amorphous fraction (OAF) in uniaxially stretched films of semicrystalline ferroelectric (FE) polymers. In this perspective, the semicrystalline structure–piezoelectric property relationship is revealed using PVDF‐based FE polymers as a model system. In melt‐processed FE polymers, the OAF is often present and links the crystalline lamellae to the isotropic amorphous fraction. Molecular dynamics simulations demonstrate that the electrostrictive conformation transformation of the OAF chains induces a polarization change upon the application of either a stress (the direct piezoelectric effect) or an electric field (the converse piezoelectric effect). Meanwhile, relaxor‐like secondary crystals in OAF (SCOAF), which are favored to grow in the extended‐chain crystal (ECC) structure, can further enhance the piezoelectricity. However, the ECC structure is difficult to achieve in PVDF homopolymers without high‐pressure crystallization. We have discovered that high‐power ultrasonication can effectively induce SCOAF in PVDF homopolymers to improve its piezoelectric performance. Finally, we envision that the electrostrictive OAF mechanism should also be applicable for other FE polymers such as odd‐numbered nylons and piezoelectric biopolymers.

Improved Surface-Enhanced Raman Scattering Performance of 2D Ti3C2Tx MXene Embedded in PVDF Film Enabled by Photoinduction and Electric Field Modulation.

In this study, we introduce a synergistic approach to enhance the surface-enhanced Raman scattering (SERS) signal in two-dimensional (2D) MXene through photo-irradiation and electric field modulation. Our methodology involves the integration of 2D Ti3C2Tx MXene with piezoelectric polyvinylidene fluoride (PVDF) polymer, resulting in the creation of a free-standing, flexible composite film. On this composite film, a thin layer of Au was deposited. Our flexible substrate was able to sense methylene blue (MB), crystal violet (CV), 4-aminothiophenol (ATP), and melamine. The SERS substrate exhibits low detection limit of 10-8 M MB with a 6.7 × 106 enhancement factor (EF). The SERS substrate enables picomolar (pM) detection sensitivity for CV molecules with an EF of 9.2 × 109. Furthermore, the introduction of photo-irradiation leads to an additional ∼3.5-fold enhancement in the SERS signal, which is attributed to the altered work function and defects. The application of mechanical force to the piezoelectric PVDF/Ti3C2Tx film results in a ∼4.5-fold boost in SERS signal due to mechanical force-induced electrical energy. The fabrication strategy employed here for producing a flexible piezoelectric PVDF/Ti3C2Tx film holds significant promise for expanding the potential application of 2D MXene in rapid, on-site sensing scenarios.

PVDF Hybrid Nanocomposites with Graphene and Carbon Nanotubes and Their Thermoresistive and Joule Heating Properties

In recent years, conductive polymer nanocomposites have gained significant attention due to their promising thermoresistive and Joule heating properties across a range of versatile applications, such as heating elements, smart materials, and thermistors. This paper presents an investigation of semi-crystalline polyvinylidene fluoride (PVDF) nanocomposites with 6 wt.% carbon-based nanofillers, namely graphene nanoplatelets (GNPs), multi-walled carbon nanotubes (MWCNTs), and a combination of GNPs and MWCNTs (hybrid). The influence of the mono- and hybrid fillers on the crystalline structure was analyzed by X-ray diffraction (XRD) and differential scanning calorimetry (DSC). It was found that the nanocomposites had increased amorphous fraction compared to the neat PVDF. Furthermore, nanocomposites enhanced the β phase of the PVDF by up to 12% mainly due to the presence of MWCNTs. The resistive properties of the nanocompositions were weakly affected by the temperature in the analyzed temperature range of 25–100 °C; nevertheless, the hybrid filler composites were proven to be more sensitive than the monofiller ones. The Joule heating effect was observed when 8 and 10 V were applied, and the compositions reached a self-regulating effect at around 100–150 s. In general, the inclusion in PVDF of nanofillers such as GNPs and MWCNTs, and especially their hybrid combinations, may be successfully used for tuning the self-regulated Joule heating properties of the nanocomposites.

Design a polymer-based composite electrolyte with high ionic conductivity for high-performance lithium-metal batteries

Constructing a stable and robust solid polymer electrolyte (SPE) is crucial for achieving dendrite-free lithium-metal anodes and high-performance lithium batteries. However, realizing the integrity of solid electrolytes with high ion conductivity during long-life cycling under high current density remains a significant challenge. In this study, we propose a multifunctional SPE with a polyvinylidene fluoride (PVDF)/co-polyphenol coordination polymer (EACo2) hybrid composite to improve the durability of Li metal anode during repeat plating/stripping cycles by using a facile solution-casting method. The PVDF as a substrate with high mechanical strength and improved lithiophilicity exhibits high ionic conduction and excellent dendrite inhibition ability; meanwhile, the EACo2 fillers with a high density of Lewis-acidic sites contribute to the dissociation of lithium salts and decrystallization of the PVDF, resulting in a high Li-ion transference number and ion conductivity (2.66 × 10−3 S cm−1 at 30 ℃). The symmetrical cells with PVDF/EACo2 SPE can stabilize cycling over 1200 hours at a deposition capacity of 0.1 mAh cm−2. Moreover, the assembled full cells Li|LiFePO4 demonstrate long-term stability (1000 cycles at 1 C) with impressive capacity retention of 75 %, offering a promising approach towards high-performance lithium metal batteries.

Synergistic Construction of Superhydrophilic PVDF Membranes by Dual Modification Strategies for Efficient Emulsion Separation.

Solving the problem of oil and water pollution is an important topic in environmental protection. The separation of oil-water emulsion with high efficiency and low consumption has been the direction of social efforts. Membrane separation technology combined with surface wettability and pore size screening is considered to be one of the most promising ways to separate oil-water emulsions. In this paper, the polyvinylidene difluoride (PVDF) membrane is prepared by combining the two methods of blending and coating modification as a double barrier. The prepared PVDF membrane can completely wet water, achieve superhydrophilic in air, and superoleophobic underwater. The separation efficiency and flux are 99.57% and 678 L h-1 m-2 bar-1, respectively, for toluene emulsions containing surfactants with an average particle size of 1.7µm. At the same time, it can also effectively separate different kinds of light/heavy oils. After three cycles of testing still maintain high efficiency of separation. The results show that the prepared PVDF membrane can effectively separate the emulsion containing surfactant with smaller particle size distribution of oil droplets. This method provides a new strategy for the separation of oil-water emulsions and has broad application prospects.

High-Resolution X-ray Image from Copper-Based Perovskite Hybrid Polymer.

Cs3Cu2I5 nanocrystals (NCs) are considered to be promising materials due to their high photoluminescence efficiency, lack of lead toxicity, and X-ray responsiveness. However, during the crystallization process, NCs are prone to agglomeration and exhibit uneven size distribution, resulting in several light scattering that severely affect their imaging resolution. Herein, we successfully developed a high-resolution scintillator film by growing copper-based perovskite NCs within a hybrid polymer matrix. By leveraging the ingenious integration of polyvinylidene fluoride (PVDF) and polymethyl methacrylate (PMMA), the size and distribution uniformity of Cs3Cu2I5 NCs can be effectively controlled. Consequently, a high spatial resolution of 14.3 lp mm-1 and a low detection limit of 105 nGy s-1 are achieved, and the scintillator film has excellent flexibility and stability. These results highlight the promising application of Cs3Cu2I5 scintillator films in low-cost, flexible, and high-performance medical imaging.

Coconstruction of Supramolecular Lithium-Conducting Cross-Linked Networks Based on PVDF and Triblock Polymer Nanomicrosphere Solid-State Polymer Electrolytes for Lithium-Metal Batteries.

Uneven lithium plating and low ionic conductivity currently impede the realization of high-capacity rechargeable lithium metal batteries. And the conventional poly(ethylene oxide) (PEO) solid-state electrolytes are unsuitable for high-energy-density Li anode applications due to their low lithium-ion transference number and high reactivity with Li metal, leading to detrimental dendrite formation and potentially hazardous exothermic reactions with the electrolyte. In this study, we employ a supramolecular approach to develop a novel polymer solid-state electrolyte based on poly(vinylidene fluoride) (PVDF) and a novel triblock polymer nanomicrosphere, (poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone), (PCL-PEG-PCL). The abundance of carbonyl and ether-oxygen functional groups in PCL-PEG-PCL enhances the lithium coordination environment within the polymer solid-state electrolyte. Additionally, the original C-F moieties of PVDF form hydrogen bonds with C-H and terminal hydroxyl groups in PCL-PEG-PCL, collectively creating a multichannel fast Li+-conducting supramolecular cross-linked network. The resulting electrolyte demonstrates a high ionic conductivity of 1.4 × 10-3 S cm-1 and an extended electrochemical window of 5.2 V. Moreover, the electrolyte exhibits a high lithium-ion transference number (tLi+ = 0.63) at room temperature and exhibits excellent interfacial compatibility with the lithium metal anode. For the resulting electrolyte utilized in LiFePO4 batteries, the capacity retention of the cells assembled with this electrolyte exceeds 91.3% after 1000 cycles at 25 °C and 2 C (0.281 mA cm-2).

Enhanced performance of electrospun PVDF membranes modified with rare-earth metal oxides for membrane distillation: A systematic study

In the presented studies, the novel type of separation materials dedicated to membrane distillation was generated and systematically analyzed. Utilizing poly(vinylidene fluoride) (PVDF) electrospun membranes as a base, hybrid organic-inorganic materials were developed to enhance performance. These materials exhibited high hydrophobicity, featuring superhydrophobicity on a micro-scale due to fractal-like structures on the inorganic domain surface. Rare-earth metal oxides (REMO) were implemented for the first time as smart modifiers, covalently attached to the functionalized membrane surface. Three REMO types were selected to investigate their impact on membrane performance in air-gap membrane distillation (AGMD) for the desalination process. Chemical attachment via long enough linkers formed a flexible active surface structure, facilitating transport and separation. Dynamic goniometric studies evaluated membrane wetting stability. Particularly noteworthy was the membrane enhanced with Ho2O3 particles, with high flux and salt rejection rates of 14.41 ± 1.35 kg m−2 h−1 and >99.5 %, respectively. The membrane stability and affinity were further examined using Hansen Solubility Parameters and Pearson's hard–soft acid–base (HSAB) theory. The potential of the hybrid membranes is seen not only in desalination. With the ability to control surface properties by using different silane linkers, oleophobicity/oleophilicity can be achieved, and practical use in wastewater treatment or oil/water separation is possible.

All-Textile Piezoelectric Nanogenerator Based on 3D Knitted Fabric Electrode for Wearable Applications.

Flexible, air permeable and elastic self-powered sensors for human motion monitoring and assisted medical rehabilitation have recently become a hot research topic. However, most current piezoelectric sensors can not account for many characteristics. Addressing this challenge, an all-textile piezoelectric sensor (ATPS) based on 3D structured knitted fabric electrodes is reported. The ATPS consists of a piezoelectric element polyvinylidene fluoride nanofiber membrane, flexible knitted fabric electrodes, and an elastic self-adhesive bandage. Based on the flexible and efficient knitting technology, the sensor has the advantages of low cost, flexibility, simple structure, and convenient large-area manufacturing. Experimental and finite element simulation results show that the knitting pattern of fabric electrodes can enhance the piezoelectric output of ATPS. The optimal ATPS has a high voltage response sensitivity of up to 0.68 V/kPa. The proposed ATPS responds to a wide range of input forces from 0.098 to 724 N in self-powered mode, verifying its feasibility as a tactile sensor for human motion detection and recognition (throat swallowing, wrist bending, elbow bending, knee bending, walking slowly, running fast) and as a pressure sensor (Morse code, digit recognition) and demonstrating its potential for motion tracking, medical rehabilitation, and human-computer interaction.

PVDF membranes for membrane distillation prepared by VIPS – A combined study of artificial water channel effectiveness and membrane performance prediction

Background A combined VIPS-NIPS technique was used to investigate the potential of self-supporting flat-sheet polyvinylidene fluoride (PVDF) membranes containing amphiphilic I-quartet Artificial Water Channels (AWC) for Direct Contact Membrane Distillation (DCMD). The AWC are formed in situ by self-assembly of HC6 molecules upon contact with water during membrane formation. Methods A Design of Experiment (DoE) was used to investigate the influence of various experimental parameters and their interactions on membrane performance, namely polymer and AWC concentrations in the dope solution, relative humidity and duration of the VIPS treatment. Pure water permeability (PWP), Liquid Entry Pressure (LEP) and DCMD flux were used to characterize membrane performance. A Response Surface Methodology (RSM) was used to evaluate the DoE results and a second order model was fitted. Based on the model predictions several multiple response-optimized (MRO) membranes were prepared. Results The performance improvement of the MRO membranes was 7.0 times for PWP (M-T4) and 3.3 times for MD flux (M-T3) over the average performance of the DoE membranes, while maintaining LEP of 1.9 bar and Salt rejection of 99.9%. In addition, hybrid PVDF/HC6 MRO membranes improved PWP by 3.2 times and MD flux by 1.6 times over pure PVDF MRO membranes. Conclusions DoE in conjunction with RSM enabled the prediction of membrane PWP, LEP and MD flux performance by varying the levels of the experimental parameters within predefined limits. The HC6 additive improves PWP and MD flux without loss of LEP or selectivity. HC6 promotes the formation of porous skin and asymmetric cross-sections with finger-like structures. Probably by affecting diffusion during phase separation due to its amphiphilic properties.

Structural, morphological, and dielectric properties of poly(vinylidene fluoride)/(Bi0.5Ba0.25Sr0.25) (La0.5Ti0.5) O3 composites

AbstractFerroelectric flexible polymer composite films of poly(vinylidene fluoride) (PVDF) with different weight percentages (10.0%, 20.0%, 30.0%, 40.0%, and 50.0%) of (Bi0.5Ba0.25Sr0.25) (La0.5Ti0.5) O3 were synthesized by solvent casting method. Analysis using the x‐ray diffractometer and Fourier transform infrared spectroscopy tools revealed the presence of the different phases (α, β) of PVDF. Scanning electron microscope morphology illustrates the homogenous dispersion of ceramics particles in the matrix. The differential scanning calorimetry curve (under 25–400°C) gives the value of melting temperature (Tm=169.98°C) and percentage crystallinity is about 29.45% for 50 wt.% composite. The findings demonstrated that the composite has good thermal stability up to 169.98°C. Dielectric analysis shows ferroelectric and dielectric behavior and also distinguishes α and β phases of PVDF. It was found that the composite film containing 50 wt.% (Bi0.5Ba0.25Sr0.25) (La0.5Ti0.5) O3 had a dielectric constant (εr) of 38 (at 100 Hz) and dielectric loss of 0.059, which are the maximum among the samples. The relative permittivity rises with an increase in filler content due to electrostatics and interfacial polarization between PVDF (CH2CF2 dipole) and ceramic. The real and imaginary part of impedance spectroscopy with frequency (Cole–Cole plots) for composite (10.0–50.0 wt.%) at 25°C are also investigated. The current study provides a fresh perspective on the fact that PVDF‐(Bi0.5Ba0.25Sr0.25) (La0.5Ti0.5) O3 composite system has improved thermal stability and dielectric characteristics.

Design of PVDF hollow fiber membranes with stable crystalline and porous structure by solvent‐free method

AbstractOne of the critical principles of green chemistry and environmental sustainability is to avoid using harmful solvents in chemical processes. In this study, a novel solvent‐free method was employed to prepare poly (vinylidene fluoride) (PVDF) hollow fiber composite membranes with stable crystalline and porous structures. Utilizing the cold‐hot stretching method, the crystalline structure and orientation of PVDF were effectively redesigned, resulting in improved mechanical and penetration properties of the membrane. Additionally, an investigation into the internal crystalline structure of the PVDF hollow fiber membrane was conducted, focusing on crystalline changes induced by ion‐dipole interactions. Results indicated that the addition of neutral ion‐dipole functional particles (N‐P) promoted the conversion of α crystalline to β crystalline, leading to stable β crystalline and controllable pore sizes in the prepared PVDF hollow fiber membrane. Furthermore, the internal crystalline structure significantly contributed to enhancing the membrane's mechanical properties and penetration performance. Notably, a PVDF hollow fiber with high β crystalline content was achieved through 150% cold‐hot stretching and the addition of 20. wt% N‐P further enhanced the β‐crystalline content in the membrane. This study presents a promising approach for reducing solvent consumption and minimizing environmental impact in the field of environment‐friendly membrane fabrication.

Enhanced Energy Storage in PVDF-Based Nanocomposite Capacitors through (00l)-Oriented BaTiO3 Single-Crystal Platelets.

Flexible nanocomposite dielectrics with inorganic nanofillers exhibit great potential for energy storage devices in advanced microelectronics applications. However, high loading of inorganic nanofillers in the matrix results in an inhomogeneous electric field distribution, thereby hindering the improvement of the energy storage density (Ue) of the dielectrics. Herein, we proposed a strategy that utilized (00l)-oriented barium titanate (BT) single-crystal platelets to fabricate trilayered nanocomposite dielectrics for energy storage applications. The trilayered nanocomposites consisted of two high-permittivity layers of (Ta2O5, Al2O3) codoped TiO2 nanoparticles (Ta-Al@TiO2 nps) dispersed in a poly(vinylidene fluoride) (PVDF) matrix to facilitate large electric displacement and a middle layer of (00l)-oriented BT single-crystal platelets to provide high breakdown strength. Hence, the trilayered PVDF/Ta-Al@TiO2 nps/BT single-crystal platelet nanocomposite film attains an outstanding Ue of 16.9 J cm-3 at 370 kV mm-1, which is ∼625% higher than that of the single-layer PVDF/Ta-Al@TiO2 nps film. Finite element simulation further clarified that the successive inner layer of highly (00l)-oriented BT single-crystal platelets could effectively restrain the propagation of electrical treeing in trilayered nanocomposites. This research offers an effective approach for developing flexible dielectric capacitors with an excellent energy storage performance.