Poly L-lactic Acid Membranes Research Articles

Effects of bone surface topography and chemistry on macrophage polarization

Surface structure plays a crucial role in determining cell behavior on biomaterials, influencing cell adhesion, proliferation, differentiation, as well as immune cells and macrophage polarization. While grooves and ridges stimulate M2 polarization and pits and bumps promote M1 polarization, these structures do not accurately mimic the real bone surface. Consequently, the impact of mimicking bone surface topography on macrophage polarization remains unknown. Understanding the synergistic sequential roles of M1 and M2 macrophages in osteoimmunomodulation is crucial for effective bone tissue engineering. Thus, exploring the impact of bone surface microstructure mimicking biomaterials on macrophage polarization is critical. In this study, we aimed to sequentially activate M1 and M2 macrophages using Poly-l-Lactic acid (PLA) membranes with bone surface topographical features mimicked through the soft lithography technique. To mimic the bone surface topography, a bovine femur was used as a model surface, and the membranes were further modified with collagen type-I and hydroxyapatite to mimic the bone surface microenvironment. To determine the effect of these biomaterials on macrophage polarization, we conducted experimental analysis that contained estimating cytokine release profiles and characterizing cell morphology. Our results demonstrated the potential of the hydroxyapatite-deposited bone surface-mimicked PLA membranes to trigger sequential and synergistic M1 and M2 macrophage polarizations, suggesting their ability to achieve osteoimmunomodulatory macrophage polarization for bone tissue engineering applications. Although further experimental studies are required to completely investigate the osteoimmunomodulatory effects of these biomaterials, our results provide valuable insights into the potential advantages of biomaterials that mimic the complex microenvironment of bone surfaces.

Cytocompatibility of electrospun poly-L-lactic acid membranes for Bruch's membrane regeneration using human embryonic stem cell-derived retinal pigment epithelial cells.

Cell replacement therapy is under development for dry age-related macular degeneration (AMD). A thin membrane resembling the Bruch's membrane is required to form a cell-on-membrane construct with retinal pigment epithelial (RPE) cells. These cells have been differentiated from human embryonic stem cells (hESCs) in vitro. A carrier membrane is required for cell implantation, which is biocompatible for cell growth and has dimensions and physical properties resembling the Bruch's membrane. Here a nanofiber electrospun poly-L-lactic acid (PLLA) membrane is tested for capacity to support cell growth and maturation. The requirements for laminin coating of the membrane are identified here. A porous electrospun nanofibrous PLLA membrane of ∼50 nm fiber diameter was developed as a prototype support for functional RPE cells grown as a monolayer. The need for laminin coating applied to the membrane following treatment with poly-L-ornithine (PLO), was identified in terms of cell growth and survival. Test membranes were compared in terms of hydrophilicity after laminin coating, mechanical properties of surface roughness and Young's modulus, porosity and ability to promote the attachment and proliferation of hESC-RPE cells in culture for up to 8 weeks. Over this time, RPE cell proliferation, morphology, and marker and gene expression, were monitored. The functional capacity of cell monolayers was identified in terms of transepithelial electrical resistance (TEER), phagocytosis of cells, as well as expression of the cytokines, vascular endothelial growth factor (VEGF) and pigment epithelium-derived factor (PEDF). PLLA polymer fibers are naturally hydrophobic, so their hydrophilicity was improved by pretreatment with PLO for subsequent coating with the bioactive protein laminin. They were then assessed for amount of laminin adsorbed, contact angle and uniformity of coating using scanning electron microscopy (SEM). Pretreatment with 100% PLO gave the best result over 10% PLO treatment or no treatment prior to laminin adsorption with significantly greater surface stiffness and modulus. By 6 weeks after cell plating, the coated membranes could support a mature RPE monolayer showing a dense apical microvillus structure and pigmented 3D polygonal cell morphology. After 8 weeks, PLO (100%)-Lam coated membranes exhibited the highest cell number, cell proliferation, and RPE barrier function measured as TEER. RPE cells showed the higher levels of specific surface marker and gene expression. Microphthalmia-associated transcription factor expression was highly upregulated indicating maturation of cells. Functionality of cells was indicated by expression of VEGF and PEDF genes as well as phagocytic capacity. In conclusion, electrospun PLLA membranes coated with PLO-Lam have the physical and biological properties to support the distribution and migration of hESC-RPE cells throughout the whole structure. They represent a good membrane candidate for preparation of hESC-RPE cells as a monolayer for implantation into the subretinal space of AMD patients.

Electrospun Poly-l-Lactic Acid Membranes Promote M2 Macrophage Polarization by Regulating the PCK2/AMPK/mTOR Signaling Pathway.

Electrospun membranes are widely used in tissue engineering. Regretfully, there is limited research on how its morphological characteristics precisely regulate macrophage activation and immune response. Therefore, electrospun poly-l-lactic acid (PLLA) membranes with different alignments (align and random) and diameters (nanoscale and microscale) are prepared to investigate the effects of different surface morphologies on M2 macrophage polarization. Additionally, transcriptome, proteome, and phosphoproteome sequencings are combined to examine the underlying regulatory mechanisms. The results show that the electrospun PLLA membranes with different surface morphologies have good biocompatibility and can regulate the phenotype and function of macrophages by changing the micromorphology of the matrix surface. Especially, macrophages cultured on the electrospun membranes of the A600 group exhibit higher M2 macrophage polarization than the other three groups. Furthermore, the findings demonstrate that electrospun PLLA membranes enhance AMP-activated protein kinase (AMPK)/ mammalian target of rapamycin (mTOR) signaling activation by upregulating the expression of integrin phosphoenolpyruvate carboxykinase 2 (PCK2), which is critical for M2 macrophage polarization. Taken together, electrospun PLLA membranes promote M2 macrophage polarization by regulating the PCK2/AMPK/mTOR signaling pathway. This research can provide further theoretical bases for scaffold design, immunoregulatory mechanisms, and clinical application based on electrospinning technology in the future.

Mid-Term Outcomes of Novel Covered Stent with Biodegradable Membrane in Porcine Coronary Artery Perforation.

Currently, commercially covered stents are the main treatment for coronary artery perforation (CAP), but without satisfied late-term outcomes when compared to drug-eluting stents (DES). This study seeks to report a new covered stent to treat porcine CAP, which is manufactured with DES and a biodegradable membrane fabricated by poly-L-lactic acid (PLLA) polymer. Experimental swines experienced CAP in proximal-middle of right coronary artery (RCA) by non-compliant balloon burst, and covered stent was deployed in breach segment. Meanwhile, coronary angiography (CAG), optical coherence tomography (OCT), histological light microscopy and scan electron microscopy were performed to characterize the performance of covered stent. Seven swines were used for this study. Two swines were euthanasia at 14 days and 28 days after procedure, respectively. The remaining 5 kept alive until sacrifice at six months. CAG at six months showed total occlusion at the stented segment of RCA in all swines. The interventional revascularization of occlusion lesion was instituted in two swines. After recanalizing occlusion lesion, OCT examination visualized diffuse heterogeneous fibrous plaques, as well as organized thrombosis, lipid deposits and several neoatherosclerosis in the occluded segment. Serial histopathologic and electron microscopies at 14 days, 28 days and six months revealed gradual occlusive vessel lumen with diffuse heterogeneous fibroplasia, smooth muscle proliferation, inflammation response and local neoatherosclerosis, moreover with identification of PLLA polymer membrane degradability. The new covered stent with biodegradable membrane could seal urgent coronary breach and prevent experimental swines death, but with all stent occlusion in mid-term (six months) follow-up, which might be attributed to diffuse heterogeneous fibroplasia, smooth muscle proliferation, inflammation response and local neoatherosclerosis with the degradation of PLLA membrane.

Osteogenic and antibacterial PLLA membrane for bone tissue engineering

Insufficient bone regeneration and bacterial infection are two major concerns of bone repair materials. Poly-L-lactic acid (PLLA) have been widely used in bone tissue engineering (BTE), however, lack of osteogenic and antibacterial properties have greatly limit its clinical application. Herein, PLLA membrane was firstly treated with polydopamine (PDA), and then modified with ε-polylysine (ε-PL) and alginate (ALG) via layer-by-layer method. The (ε-PL/ALG)n composite layer coated PLLA (PLLA@(ε-PL/ALG)n) could facilitates the adhesion and osteoblast differentiation of MC3T3-E1 cells. Furthermore, PLLA@(ε-PL/ALG)n presents an effective antibacterial efficacy against S. aureus and E. coli, and the bacterial survival rates of S. aureus and E. coli on PLLA@(ε-PL/ALG)10 were 21.5 ± 3.5 % and 13 ± 2.1 %, respectively. This work provides a promising method to design PLLA materials with osteogenic and antibacterial activity simultaneously. Furthermore, the method is also an optional choice to construct multifunctional coatings on the other substrate.

Pyrrolidine Dithiocarbamate-loaded Electrospun Membranes for Peritendinous Anti-adhesion through Inhibition of the Nuclear Factor-κB Pathway

Peritendinous adhesion is a major cause of limb dysfunction and disability in clinical practice. Numerous studies suggest that activation of nuclear factor-κB (NF-κB) pathway in macrophages could be the pivotal figure in excessive collagen synthesis and thus peritendinous adhesion formation. In this study, we assumed this pathological process could be suppressed by inhibiting NF-κB phosphorylation and nuclear translocation using pyrrolidine dithiocarbamate (PDTC), a specific NF-κB inhibitor with the ability to penetrate cell membranes, in macrophages. Then, we conducted electrospinning process to incorporate PDTC into poly(L-lactic) acid (PLA) electrospinning membranes, that is, the PDTC-PLA membranes. Further, with integral film quality and stable drug release property, the PDTC-PLA membranes were subsequently analyzed in the capability and mechanism of preventing adhesion formation both in vitro and in vivo. Our results showed inhibition of macrophage proliferation as well as NF-κB pathway activation from in vitro assays and outstanding promotion in inhibiting NF-κB p65 phosphorylation and reducing adhesion formation from in vivo assays of PDTC-PLA compared to PLA membranes. In conclusion, our findings suggested that PDTC-PLA as an alternative therapeutic approach alleviated inflammation and peritendinous adhesion formation through NF-κB signaling pathway. Statement of significancePyrrolidine dithiocarbamate (PDTC) can be blended into poly-L-lactic acid (PLA) fibrous membranes by electrospinning process. This incorporation of PDTC into PLA is an effective way to inhibit proinflammatory activation of macrophages and to achieve advanced anti-adhesion outcome after tendon repair.

Analysis of the biocompatibility of a biocelulose and a poly L- lactic acid membrane

The use of selective barriers as resorbable membranes has become a routine clinical procedure for guided bone regeneration. Therefore, the production of membranes with a low inflammatory potential during their resorption process has become the goal of a considerable number of researches. Aim: The purpose of the present study was to evaluate the biocompatibility of poly (L- lactic acid) (PLLA) and biocelulose membranes (BC) inserted in the subcutaneous tissue on the dorsum of rats. Methods: Fifteen animals underwent surgical procedures for the insertion of 4 types of membranes: COL (Collagen membrane) – Control Group; BC (Biocellulose membrane); BCAg (Biocellulose membrane impregnated with Silver); PLLA (Poly (L-lactic acid) membrane). All membrane types were inserted into each animal. Animals were euthanized after 3, 7, and 15 days of the surgical procedure. Descriptive histological analyses were carried out to investigate host tissue reaction to membrane presence by assessing the anti-inflammatory process composition associated with the membrane resorption and the presence of foreign-body reaction or encapsulation. Results: The BC membranes showed a higher degree of inflammation and poor pattern of integration with the surrounding tissues than the PLLA and COL membranes. Conclusion: The PLLA and COL membranes present better biocompatibility than the BC membranes.

LBL assembly of Ag@Ti3C2T X and chitosan on PLLA substrate to enhance antibacterial and biocompatibility

Poly L-lactic acid (PLLA) is a non-toxic, biocompatible degradable polymer material with excellent mechanical properties after moulding. However, it faces challenges in the use of biomedical materials because of its intolerance to bacteria. Here, we use an easy-to-operate method to prepare a composite multilayer membrane: PLLA membrane was used as substrates to assemble positively charged chitosan and negatively charged Ag@MXene on the surface using the layer-by-layer (LBL) method. The assembly process was detected by fluorescein isothiocyanate-labelled chitosan and the thickness of the coating multilayer was also detected as 210.0 ± 12.1 nm for P-M membrane and 460.5 ± 26.5 nm for P-Ag@M membrane. The surface self-assembled multilayers exhibited 91.27% and 96.11% growth inhibition ratio against Escherichia coli and Staphylococcus aureus strains under 808 nm near-infrared laser radiation with a synergistic photothermal antibacterial effect. Furthermore, best biocompatibility of P-M and P-Ag@M membranes compare to PLLA membrane motivated us to further explore its application in biomedical materials.

Initial Clinical Experience with the Biodegradable AbsnowTM Device for Percutaneous Closure of Atrial Septal Defect: A 3-Year Follow-Up

Objective We reported the 3-year follow-up results of initial clinical experience with the AbsnowTM device, a novel biodegradable occluder for percutaneous closure of atrial septal defect (ASD). Background The AbsnowTM device is a total biodegradable septal occluder with double-disc poly-L-lactic acid (PLLA) framework and PLLA membranes intergraded into the device to ensure its biodegradability, clinical safety, and efficacy. Methods Five pediatric patients were enrolled from May to June 2018 in our institution and were followed up for 3 years. A clinical evaluation and transthoracic echocardiography were performed at 24 hr, 1 month, 3 months, 6 months, 12 months, and yearly after implantation. Primary endpoints were a composite clinical success, comprising of clinical closure success and safety at the 36-month follow-up evaluation. Secondary endpoints included technical success, procedure success, closure success, and safety at each of the follow-up visits. Results The median subject age was 3.6 years (range 3.1–6.5 years). The mean ASD diameter was (13.7 ± 2.9) mm. The median device size was 20 mm (range 14 to 24 mm). Technical and procedure success was achieved in 100% (5/5) of the patients. At 2-year follow-up, 3 of the 5 patients developed new-onset residual shunts and 2 of them reached a moderate degree. At 3-year follow-up, the residual shunt size increased over time in all the 3 patients, and 1 of them had right ventricular enlargement. All of the 5 patients were free from serious adverse events during the 3-year follow-up, with no device embolization, thromboembolization, or reintervention to the target defect. Conclusion This 3-year follow-up result of initial experience with the biodegradable AbsnowTM device has demonstrated acceptable safety with no procedural complications. Notably, the high rate of residual shunt significantly affected its efficacy. The long-term safety and efficacy of the device should be further evaluated in a large cohort of patients in future studies.

PLLA Membrane with Embedded Hydroxyapatite Patterns for Improved Bioactivity and Efficient Delivery of Growth Factor.

Poly(l-lactic) acid (PLLA) is widely used in guided bone regeneration membranes due to its mechanical properties and biodegradability. However, the lack of biocompatibility is a serious disadvantage. Herein, the biocompatibility of PLLA is improved by patterning hydroxyapatite (HA) loaded with recombinant human bone morphogenetic protein-2 (rhBMP-2) under it. The HA is obtained by preparing a magnesium pattern via photolithography and hydrothermal converting. After loading rhBMP-2, the pattern is transferred to PLLA. The pattern is tightly embedded in the PLLA and retained its original position after mechanical stimuli. Fluorescence images allow to assess the protein adsorption and gradual release in a controlled manner. The amount of released rhBMP-2 is overwhelmingly large when loaded under HA because of its large surface area. Osteogenic differentiation supports the synergistic effect of HA and rhBMP-2 to improve the biocompatibility. Moreover, in vivo experiments demonstrate that the synergistic effect positively affects the healing rate of bone.

Beeswax-inspired superhydrophobic electrospun membranes for peritendinous anti-adhesion.

Posttraumatic peritendinous adhesion leads to limb disability. Physical barrier was widely used and thus focus was paid to fabricate the hydrophobic surfaces of electrospun membrane for anti-adhesion. However, current methods are limited and complicated. In this study, beeswax (Wax)/poly-L-lactic acid (PLA) anti-adhesion membranes were fabricated by blending electrospinning of Wax and PLA. The water contact angle was tested to investigate the hydrophobicity of the surfaces. Incorporation of Wax into PLA did not destroy the micro-pores between Wax/PLA fibers. After 7-day culture, proliferation of fibroblasts on Wax/PLA anti-adhesion membranes were significantly less than that on culture dish and PLA membranes. In rat Achilles adhesion model, least histological peritendinous adhesion formation was detected on the repaired sites in the group treated with Wax/PLA membranes than PLA membranes. Consequently, blending electrospinning of Wax into PLA is an easy method to fabricate hydrophobic surface of electrospun membrane with advanced peritendinous anti-adhesion outcome.

Establishment of a pulmonary epithelial barrier on biodegradable poly-L-lactic-acid membranes.

Development of biocompatible and functional scaffolds for tissue engineering is a major challenge, especially for development of polarised epithelia that are critical structures in tissue homeostasis. Different in vitro models of the lung epithelial barrier have been characterized using non-degradable polyethylene terephthalate membranes which limits their uses for tissue engineering. Although poly-L-lactic acid (PLLA) membranes are biodegradable, those prepared via conventional Diffusion Induced Phase Separation (DIPS) lack open-porous geometry and show limited permeability compromising their use for epithelial barrier studies. Here we used PLLA membranes prepared via a modification of the standard DIPS protocol to control the membrane surface morphology and permeability. These were bonded to cell culture inserts for use in barrier function studies. Pulmonary epithelial cells (H441) readily attached to the PLLA membranes and formed a confluent cell layer within two days. This was accompanied by a significant increase in trans-epithelial electrical resistance and correlated with the formation of tight junctions and vectorial cytokine secretion in response to TNFα. Our data suggest that a structurally polarized and functional epithelial barrier can be established on PLLA membranes produced via a non-standard DIPS protocol. Therefore, PLLA membranes have potential utility in lung tissue engineering applications requiring bio-absorbable membranes.

Reinforcement of poly-l-lactic acid electrospun membranes with strontium borosilicate bioactive glasses for bone tissue engineering.

Herein, for the first time, we combined poly-l-lactic acid (PLLA) with a strontium borosilicate bioactive glass (BBG-Sr) using electrospinning to fabricate a composite bioactive PLLA membrane loaded with 10% (w/w) of BBG-Sr glass particles (PLLA-BBG-Sr). The composites were characterised by scanning electron microscopy (SEM) and microcomputer tomography (μ-CT), and the results showed that we successfully fabricated smooth and uniform fibres (1-3μm in width) with a homogeneous distribution of BBG-Sr microparticles (<45μm). Degradation studies (in phosphate buffered saline) demonstrated that the incorporation of BBG-Sr glass particles into the PLLA membranes increased their degradability and water uptake with a continuous release of cations. The addition of BBG-Sr glass particles enhanced the membrane's mechanical properties (69% higher Young modulus and 36% higher tensile strength). Furthermore, cellular in vitro evaluation using bone marrow-derived mesenchymal stem cells (BM-MSCs) demonstrated that PLLA-BBG-Sr membranes promoted the osteogenic differentiation of the cells as demonstrated by increased alkaline phosphatase activity and up-regulated osteogenic gene expression (Alpl, Sp7 and Bglap) in relation to PLLA alone. These results strongly suggest that the composite PLLA membranes reinforced with the BBG-Sr glass particles have potential as an effective biomaterial capable of promoting bone regeneration. PLLA membranes were reinforced with 10% (w/w) of strontium-bioactive borosilicate glass microparticles, and their capacity to induce the osteogenic differentiation of bone marrow mesenchymal stem cells (BM-MSCs) was evaluated. These membranes presented an increased: degradability, water uptake, Young modulus and tensile strength. We also demonstrated that these membranes are non-cytotoxic and promote the attachment of BM-MSCs. The addition of the glass microparticles into the PLLA membranes promoted the increase of ALP activity (under osteogenic conditions), as well as the BM-MSCs osteogenic differentiation as shown by the upregulation of Alpl, Sp7 and Bglap gene expression. Overall, we demonstrated that the reinforcement of PLLA with glass microparticles results in a biomaterial with the appropriate properties for the regeneration of bone tissue.

Lateral Bone Window Closing Technique with Poly-L-Lactic Acid (PLLA) Membrane in the Augmentation of the Maxillary Sinus without Grafting Material: Evaluation of Bone Healing in a Rabbit Model.

When augmenting the maxillary sinus without grafting material, the method used to cover the bony window is a subject of debate. The purpose of this study was to evaluate the poly-L-lactic acid (PLLA) membrane as closing material of the lateral window in a maxillary sinus augmentation without bone grafting. Augmentation of the maxillary sinus without grafting material and installation of titanium screws that fix the Schneiderian membrane were performed in 18 Japanese male white rabbits. The bony window was covered with a collagen membrane or PLLA membrane or no membrane. The animals were sacrificed at 4 or 8 weeks. New bone volume was calculated radiologically using microcomputed tomography (micro-CT). The samples were analyzed histologically after toluidine blue staining. No significant differences were observed in the new bone volume, as measured by micro-CT. However, histomorphometric analysis demonstrated the superiority of the PLLA membrane in new bone formation compared with the collagen membrane. The PLLA membrane is a suitable material to be applied for tissue regeneration in this animal model.

Preparation of Thermoplastic Poly(L-Lactic Acid) Membranes for Guided Bone Regeneration

The objective of this study was to evaluate the feasibility of application of thermoplastic poly-L lactic acid (PLLA) membranes for guided bone regeneration in rabbit parietal bone. PLLA membranes with a molecular weight of 100,000 (PLLA-100,000) and a molecular weight of 380,000 (PLLA-380,000) were dissolved in chloroform to prepare concentrations of 8% by weight and 4% by weight, respectively. The compression strength, temperature, and time to prepare each formulation were measured. Moreover, the pH was noted and cytotoxicity of the membrane was determined by monotetrazolium assay. In vivo experiments were performed to measure the volume of newly formed bone tissue in hematoxylin and eosin-stained tissue sections 4 and 12 weeks after implantation. The membrane prepared from PLLA-380,000 showed excellent thermoplasticity at 75°C to 80°C and the compressive strength was equal to that of titanium mesh, in contrast to that of PLLA-100,000 and poly(lactic acid-co-glycolic acid). There was a significant change in the pH of an aqueous solution in which the PLLA-380,000 membrane was placed, but there was no cytotoxic activity. The membrane made of PLLA-380,000 induced new bone formation in a dome shape without any membrane deformation. Thermoplastic PLLA membrane shows promise for guided bone regeneration in vertical bone augmentation.

Poly-l-Lactic Acid/Hydroxyapatite Electrospun Nanocomposites Induce Chondrogenic Differentiation of Human MSC

Cartilage and bone tissue engineering has been widely investigated but is still hampered by cell differentiation and transplant integration issues within the constructs. Scaffolds represent the pivotal structure of the engineered tissue and establish an environment for neo-extracellular matrix synthesis. They can be associated to signals to modulate cell activity. In this study, considering the well reported role of hydroxyapatite (HA) in cartilage repair, we focused on the putative chondrogenic differentiation of human mesenchymal stem cells (hMSCs) following culture on membranes of electrospun fibers of poly-L-lactic acid (PLLA) loaded with nanoparticles of HA. hMSCs were seeded on PLLA/HA and bare PLLA membranes and cultured in basal medium, using chondrogenic differentiation medium as a positive control. After 14 days of culture, SOX-9 positive cells could be detected in the PLLA/HA group. Cartilage specific proteoglycan immunostain confirmed the presence of neo-extracellular-matrix production. Co-expression of CD29, a typical surface marker of MSCs and SOX-9, suggested different degrees in the differentiation process. We developed a hydroxyapatite functionalized scaffold with the aim to recapitulate the native histoarchitecture and the molecular signaling of osteochondral tissue to facilitate cell differentiation toward chondrocyte. PLLA/HA nanocomposites induced differentiation of hMSCs in a chondrocyte-like phenotype with generation of a proteoglycan based matrix. This nanocomposite could be an amenable alternative scaffold for cartilage tissue engineering using hMSCs.

Poly‐L‐lactic acid/hydroxyapatite hybrid membrane for bone tissue regeneration

Poly-L-lactic acid (PLLA)/hydroxyapatite (HA) hybrid membranes were fabricated via electrospinning of the PLLA/HA dispersion for use in bone tissue regeneration. The structural properties and morphologies of PLLA and PLLA/HA hybrid membrane were investigated by measuring the Brunauer-Emmett-Teller specific surface area, observations of SEM, and TEM. The dispersion and integrating of HA nanoparticles in the hybrid membrane were studied by energy dispersion X-ray analysis and FTIR. The mechanical properties of PLLA/HA membrane were also measured by tensile tests. For exploring biological behaviors of the hybrid membrane, in vitro degradation tests were carried out. The osteoblast cell (MG-63) was cultured in PLLA/HA hybrid membrane extract containing medium; the cell adhesion and growth capability were investigated by SEM observation and MTT assay. HA nanoparticles were not only dispersed in the PLLA but also reacted with the functional group of PLLA, resulting in strong surface bonding and high tensile strength of hybrid membrane. The cell adhesion and growth on the PLLA/HA hybrid membrane were far better than those on the pure PLLA membrane, which proves that the PLLA/HA hybrid membrane can be one of the promising biomaterials for bone tissue regeneration.

Chondrocyte behaviors on poly- l-lactic acid (PLLA) membranes containing hydroxyl, amide or carboxyl groups

Hydrophilic groups, i.e. hydroxyl (–OH), carboxyl (–COOH) or amide (–CONH 2) were introduced onto the poly- l-lactic acid (PLLA) membrane surfaces via the photo-induced grafting copolymerization of the corresponding monomers, i.e. hydroxyethyl methacrylate, methacrylic acid or acrylamide, respectively. Chondrocyte culture was used to study the correlation between the cell behaviors and the hydrophilic functional groups. The results showed that the cytocompatibility of the PLLA membranes with hydroxyl or amide groups on the surface was greatly improved compared to that of the original PLLA membrane. However, the PLLA membrane with carboxyl groups on the surface had even worse cytocompatibility though possessed a similar hydrophilicity.

Surface modification of poly-L-lactic acid (PLLA) membrane by grafting acrylamide: an effective way to improve cytocompatibility for chondrocytes

Poly-L-lactic acid (PLLA) membranes were photo-oxidized in hydrogen peroxide solution under ultraviolet light (UV) to introduce hydroperoxide groups onto the PLLA membrane surfaces. The photo-oxidized membranes were then immersed in acrylamide (AAm) solution containing Fe2+ to graft polyacrylamide (PAAm) onto the PLLA membrane surfaces. The density of the hydroperoxide groups introduced on the PLLA membrane surfaces varied with the temperature and the photooxidization time. The occurrence of grafting was verified by X-ray photoelectron spectroscopy (XPS). The degree of grafting increased with the monomer concentration and the polymerization time. Water contact angle measurements showed that the wettability of the modified PLLA membranes had improved. Chondrocytes proliferated more rapidly and were more spread out on the modified membrane than on the control PLLA membrane, indicating that the PAAm-grafted PLLA membrane has better cytocompatibility for chondrocytes.

Immobilization of natural macromolecules on poly-L-lactic acid membrane surface in order to improve its cytocompatibility.

With the use of a grafting-coating method, three kinds of natural macromolecules, that is, gelatin, collagen, or chitosan, were immobilized on poly-L-lactic acid (PLLA) membrane surfaces with the goal of improving of cellular interactions. Attenuated total reflectance infrared spectroscopy (ATR-IR), x-ray photoelectron spectroscopy (XPS) and surface morphology analysis using scanning electronic microscopy (SEM) confirmed that the natural macromolecule layers adhered tightly to the hydrophobic PLLA membrane surfaces. Chondrocyte culture showed that the modified PLLA membranes had higher cell attachment, higher cell proliferation rate, and higher cell activity than the control PLLA membrane. Moreover, the chondrocytes were more spread out on the modified PLLA membranes than on the control PLLA membranes.