Poly Ethylene Glycol Diacrylate Hydrogels Research Articles

Thermal Transport Phenomena in PEGDA-Based Nanocomposite Hydrogels Using Atomistic and Experimental Techniques.

Poly(ethylene glycol) diacrylate (PEGDA) hydrogel is a very peculiar, fascinating material with good chemical stability and biocompatibility. However, the poor thermal transport phenomenon in PEGDA, limits its performance in cartilage replacement and developing therapies for treating burns. In this article, a combined experimental and atomistic approach was adopted to investigate the thermal transport phenomena in PEGDA hydrogel with different weight concentrations of boron nitride nanoplatelets as a function of water content. The incorporation of boron nitride nanofillers helps in enhancing the thermal conductivity of PEGDA hydrogels, and the reinforcement effect was more dominating at lower water content. Experimental investigation was complemented with molecular dynamics-based studies to capture the effect of defective (bicrystalline) boron nitride nanosheets on the interfacial thermal conductance in PEGDA hydrogels. It can be concluded from the simulations that defective nanosheets are superior reinforcement for enhancing the thermal transport in PEGDA hydrogels, and this is independent of the water content. These biocompatible boron nitride nanoparticle (BNNP)-incorporated PEGDA hydrogels with enhanced thermal conductivity are promising materials in addressing locally overheating tissues such as cartilage replacement. They may have comprehensive utility for biomedical applications such as tissue engineering, drug delivery, biosensors, and burn therapy.

Remodeling Microenvironment for Implant-Associated Osteomyelitis by Dual Metal Peroxide.

Implant-associated osteomyelitis (IAOM) is characterized by bone infection and destruction; current therapy of antibiotic treatment and surgical debridement often results in drug resistance and bone defect. It is challenging to develop an antibiotic-free bactericidal and osteogenic-enhanced strategy for IAOM. Herein, an IAOM-tailored antibacterial and osteoinductive composite of copper (Cu)-strontium (Sr) peroxide nanoparticles (CSp NPs), encapsulated in polyethylene glycol diacrylate (PEGDA) (CSp@PEGDA), is designed. The dual functional CSp NPs display hydrogen peroxide (H2 O2 ) self-supplying and Fenton catalytic Cu2+ ions' release, generating plenty of hydroxyl radical (• OH) in a pH-responsive manner for bacterial killing, while the released Sr2+ promotes the in vitro osteogenicity regarding cell proliferation, alkaline phosphatase activity, extracellular matrix calcification, and osteo-associated genes expression. The integration of Cu2+ and Sr2+ in CSp NPs together with the coated PEGDA hydrogel ensures the stable and sustainable ion release during short- and long-term periods. Benefitted from the injectablity and photo-crosslink ability, CSp@PEGDA is able to thoroughly fill the infectious site and gelate in situ for bacterial elimination and bone regeneration, which is verified through in vivo evaluation using a clinical-simulating IAOM mouse model. These favorable abilities of CSp@PEGDA precisely meet the multiple therapeutic needs and pave a promising way for implant-associated osteomyelitis treatment.

ZnO Quantum Photoinitiators as an All-in-One Solution for Multifunctional Photopolymer Nanocomposites.

Nanocomposites are constructed from a matrix material combined with dispersed nanosized filler particles. Such a combination yields a powerful ability to tailor the desired mechanical, optical, electrical, thermodynamic, and antimicrobial material properties. Colloidal semiconductor nanocrystals (SCNCs) are exciting potential fillers, as they display size-, shape-, and composition-controlled properties and are easily embedded in diverse matrices. Here we present their role as quantum photoinitiators (QPIs) in acrylate-based polymer, where they act as a catalytic radical initiator and endow the system with mechanical, photocatalytic, and antimicrobial properties. By utilizing ZnO nanorods (NRs) as QPIs, we were able to increase the tensile strength and elongation at break of poly(ethylene glycol) diacrylate (PEGDA) hydrogels by up to 85%, unlike the use of the same ZnO NRs acting merely as fillers. Simultaneously, we endowed the PEGDA hydrogels with post-polymerization photocatalytic and antimicrobial activities and showed their ability to decompose methylene blue and significantly eradicate antibiotic-resistant bacteria and viral pathogens. Moreover, we demonstrate two fabrication showcase methods, traditional molding and digital light processing printing, that can yield hydrogels with complex architectures. These results position SCNC-based systems as promising candidates to act as all-in-one photoinitiators and fillers in nanocomposites for diverse biomedical applications, where specific and purpose-oriented characteristics are required.

Fabrication and Validation of a 3D Portable PEGDA Microfluidic Chip for Visual Colorimetric Detection of Captured Breast Cancer Cells.

To guide therapeutic strategies and to monitor the state changes in the disease, a low-cost, portable, and easily fabricated microfluidic-chip-integrated three-dimensional (3D) microchamber was designed for capturing and analyzing breast cancer cells. Optimally, a colorimetric sensor array was integrated into a microfluidic chip to discriminate the metabolites of the cells. The ultraviolet polymerization characteristic of poly(ethylene glycol) diacrylate (PEGDA) hydrogel was utilized to rapidly fabricate a three-layer hydrogel microfluidic chip with the designed structure under noninvasive 365 nm laser irradiation. 2-Hydroxyethyl methacrylate (HEMA) was added to the prepolymer in order to increase the adhesive capacity of the microchip's surface for capturing cells. 1-Vinyl-2-pyrrolidone (NVP) was designed to improve the toughness and reduce the swelling capacity of the hydrogel composite. A non-toxic 3D hydrogel microarray chip (60 mm × 20 mm × 3 mm) with low immunogenicity and high hydrophilicity was created to simulate the real physiological microenvironment of breast tissue. The crisscross channels were designed to ensure homogeneous seeding density. This hydrogel material displayed excellent biocompatibility and tunable physical properties compared with traditional microfluidic chip materials and can be directly processed to obtain the most desirable microstructure. The feasibility of using a PEGDA hydrogel microfluidic chip for the real-time online detection of breast cancer cells' metabolism was confirmed using a specifically designed colorimetric sensor array with 16 kinds of porphyrin, porphyrin derivatives, and indicator dyes. The results of the principal component analysis (PCA), the hierarchical cluster analysis (HCA), and the linear discriminant analysis (LDA) suggest that the metabolic liquids of different breast cells can be easily distinguished with the developed PEGDA hydrogel microfluidic chip. The PEGDA hydrogel microfluidic chip has potential practicable applicability in distinguishing normal and cancerous breast cells.

Cation–polymer interactions and local heterogeneity determine the relative order of alkali cation diffusion coefficients in PEGDA hydrogels

Current research efforts are focused on endowing polymer membranes with ion–ion selectivity by incorporating ion–polymer interactions into materials to bias the selective partitioning and or diffusivity of one species over another. However, little is known about the impact of such interactions on the mechanisms of ion transport. In this study, we probe the influence of cation–polymer interactions on cation, anion, and salt diffusivity in a model membrane material, poly(ethylene glycol) diacrylate (PEGDA) by modeling concentrated polyethylene oxide solutions via molecular dynamics simulations. These results are compared to published experimental data for LiCl, NaCl, and KCl diffusion in PEGDA. Experimentally, the order of salt and cation diffusion coefficients for LiCl, NaCl, and KCl deviate from the order in aqueous solutions. Simulations identify these deviations to arise from cation–polymer coordination in the membrane. Both the fraction of bound cations and the average binding lifetime increases with decreasing cation hydration free energy (moving down the alkali series), leading to different diffusivity trends in the membrane compared to solution. However, to recover the experimentally observed order of diffusivities cations and salt in our simulations, we needed to incorporate membrane heterogeneity explicitly via a polymer charge scaling procedure. Together, our results indicate that cation–polymer interactions, as well as spatial heterogeneity within the membrane, play a critical role in dictating the observed order of alkali cation and salt diffusion coefficients in membranes.

Generation of Photopolymerized Microparticles Based on PEGDA Hydrogel Using T-Junction Microfluidic Devices: Effect of the Flow Rates.

The formation of microparticles (MPs) of biocompatible and biodegradable hydrogels such as polyethylene glycol diacrylate (PEGDA) utilizing microfluidic devices is an attractive option for entrapment and encapsulation of active principles and microorganisms. Our research group has presented in previous studies a formulation to produce these hydrogels with adequate physical and mechanical characteristics for their use in the formation of MPs. In this work, hydrogel MPs are formed based on PEGDA using a microfluidic device with a T-junction design, and the MPs become hydrogel through a system of photopolymerization. The diameters of the MPs are evaluated as a function of the hydrodynamic condition flow rates of the continuous (Qc) and disperse (Qd) phases, measured by optical microscopy, and characterized through scanning electron microscopy. As a result, the following behavior is found: the diameter is inversely proportional to the increase in flow in the continuous phase (Qc), and it has a significant statistical effect that is greater than that in the flow of the disperse phase (Qd). While the diameter of the MPs is proportional to Qd, it does not have a significant statistical effect on the intervals of flow studied. Additionally, the MPs' polydispersity index (PDI) was measured for each experimental hydrodynamic condition, and all values were smaller than 0.05, indicating high homogeneity in the MPs. The microparticles have the potential to entrap pharmaceuticals and microorganisms, with possible pharmacological and bioremediation applications.

3D printing to construct in vitro multicellular models of melanoma.

Currently, there is a lack of suitable models for in-vitro studies of malignant melanoma and traditional single cell culture models no longer reproduce tumor structure and physiological complexity well. The tumor microenvironment is closely related to carcinogenesis and it is particularly important to understand how tumor cells interact and communicate with surrounding nonmalignant cells. Three-dimensional (3D) in vitro multicellular culture models can better simulate the tumor microenvironment due to their excellent physicochemical properties. In this study, 3D composite hydrogel scaffolds were prepared fromgelatin methacrylate and polyethylene glycol diacrylate hydrogels by 3D printing and light curing techniques, and 3D multicellular in vitro tumor culture models were established by inoculating human melanoma cells (A375) and human fibroblasts cells on them. The cell proliferation, migration, invasion, and drug resistance of the 3D multicellular in vitro model was evaluated. Compared with the single-cell model, the cells in the multicellular model had higher proliferation activity and migration ability, and were easy to form dense structures. Several tumor cell markers, such as matrix metalloproteinase-9 (MMP-9), MMP-2, and vascular endothelial growth factor, were highly expressed in the multicellular culture model, which were more favorable for tumor development. In addition, higher cell survival rate was observed after exposure to luteolin. The anticancer drug resistance result of the malignant melanoma cells in the 3D bioprinted construct demonstrated physiological properties, suggesting the promising potential of current 3D printed tumor model in the development of personalized therapy, especially for discovery of more conducive targeted drugs.

Additive Manufacturing and Physicomechanical Characteristics of PEGDA Hydrogels: Recent Advances and Perspective for Tissue Engineering.

In this brief review, we discuss the recent advancements in using poly(ethylene glycol) diacrylate (PEGDA) hydrogels for tissue engineering applications. PEGDA hydrogels are highly attractive in biomedical and biotechnology fields due to their soft and hydrated properties that can replicate living tissues. These hydrogels can be manipulated using light, heat, and cross-linkers to achieve desirable functionalities. Unlike previous reviews that focused solely on material design and fabrication of bioactive hydrogels and their cell viability and interactions with the extracellular matrix (ECM), we compare the traditional bulk photo-crosslinking method with the latest three-dimensional (3D) printing of PEGDA hydrogels. We present detailed evidence combining the physical, chemical, bulk, and localized mechanical characteristics, including their composition, fabrication methods, experimental conditions, and reported mechanical properties of bulk and 3D printed PEGDA hydrogels. Furthermore, we highlight the current state of biomedical applications of 3D PEGDA hydrogels in tissue engineering and organ-on-chip devices over the last 20 years. Finally, we delve into the current obstacles and future possibilities in the field of engineering 3D layer-by-layer (LbL) PEGDA hydrogels for tissue engineering and organ-on-chip devices.

3D Bioprintable Hypoxia-Mimicking PEG-Based Nano Bioink for Cartilage Tissue Engineering

As hypoxia plays a significant role in the formation and maintenance of cartilage tissue, aiming to develop native hypoxia-mimicking tissue engineering scaffolds is an efficient method to treat articular cartilage (AC) defects. Cobalt (Co) is documented for its hypoxic-inducing effects in vitro by stabilizing the hypoxia-inducible factor-1α (HIF-1α), a chief regulator of stem cell fate. Considering this, we developed a novel three-dimensional (3D) bioprintable hypoxia-mimicking nano bioink wherein cobalt nanowires (Co NWs) were incorporated into the poly(ethylene glycol) diacrylate (PEGDA) hydrogel system as a hypoxia-inducing agent and encapsulated with umbilical cord-derived mesenchymal stem cells (UMSCs). In the current study, we investigated the impact of Co NWs on the chondrogenic differentiation of UMSCs in the PEGDA hydrogel system. Herein, the hypoxia-mimicking nano bioink (PEGDA+Co NW) was rheologically optimized to bioprint geometrically stable cartilaginous constructs. The bioprinted 3D constructs were evaluated for their physicochemical characterization, swelling-degradation behavior, mechanical properties, cell proliferation, and the expression of chondrogenic markers by histological, immunofluorescence, and reverse transcription-quantitative polymerase chain reaction (RT-qPCR) methods. The results disclosed that, compared to the control (PEGDA) group, the hypoxia-mimicking nano bioink (PEGDA+Co NW) group outperformed in print fidelity and mechanical properties. Furthermore, live/dead staining, double-stranded DNA (dsDNA) content, and glycosaminoglycans (GAGs) content demonstrated that adding low amounts of Co NWs (<20 ppm) into PEGDA hydrogel system supported UMSC adhesion, proliferation, and differentiation. Histological and immunofluorescence staining of the PEGDA+Co NW bioprinted structures revealed the production of type 2 collagen (COL2) and sulfated GAGs, rendering it a feasible option for cartilage repair. It was further corroborated by a significant upregulation of the hypoxia-mediated chondrogenic and downregulation of the hypertrophic/osteogenic marker expression. In conclusion, the hypoxia-mimicking hydrogel system, including PEGDA and Co2+ ions, synergistically directs the UMSCs toward the chondrocyte lineage without using expensive growth factors and provides an alternative strategy for translational applications in the cartilage tissue engineering field.

Mechanical Behavior of 3D Printed Poly(ethylene glycol) Diacrylate Hydrogels in Hydrated Conditions Investigated Using Atomic Force Microscopy.

Three-dimensional (3D) printed hydrogels fabricated using light processing techniques are poised to replace conventional processing methods used in tissue engineering and organ-on-chip devices. An intrinsic potential problem remains related to structural heterogeneity translated in the degree of cross-linking of the printed layers. Poly(ethylene glycol) diacrylate (PEGDA) hydrogels were used to fabricate both 3D printed multilayer and control monolithic samples, which were then analyzed using atomic force microscopy (AFM) to assess their nanomechanical properties. The fabrication of the hydrogel samples involved layer-by-layer (LbL) projection lithography and bulk cross-linking processes. We evaluated the nanomechanical properties of both hydrogel types in a hydrated environment using the elastic modulus (E) as a measure to gain insight into their mechanical properties. We observed that E increases by 4-fold from 2.8 to 11.9 kPa transitioning from bottom to the top of a single printed layer in a multilayer sample. Such variations could not be seen in control monolithic sample. The variation within the printed layers is ascribed to heterogeneities caused by the photo-cross-linking process. This behavior was rationalized by spatial variation of the polymer cross-link density related to variations of light absorption within the layers attributed to spatial decay of light intensity during the photo-cross-linking process. More importantly, we observed a significant 44% increase in E, from 9.1 to 13.1 kPa, as the indentation advanced from the bottom to the top of the multilayer sample. This finding implies that mechanical heterogeneity is present throughout the entire structure, rather than being limited to each layer individually. These findings are critical for design, fabrication, and application engineers intending to use 3D printed multilayer PEGDA hydrogels for in vitro tissue engineering and organ-on-chip devices.

Nanoindentation Response of 3D Printed PEGDA Hydrogels in a Hydrated Environment.

Hydrogels are commonly used materials in tissue engineering and organ-on-chip devices. This study investigated the nanomechanical properties of monolithic and multilayered poly(ethylene glycol) diacrylate (PEGDA) hydrogels manufactured using bulk polymerization and layer-by-layer projection lithography processes, respectively. An increase in the number of layers (or reduction in layer thickness) from 1 to 8 and further to 60 results in a reduction in the elastic modulus from 5.53 to 1.69 and further to 0.67 MPa, respectively. It was found that a decrease in the number of layers induces a lower creep index (CIT) in three-dimensional (3D) printed PEGDA hydrogels. This reduction is attributed to mesoscale imperfections that appear as pockets of voids at the interfaces of the multilayered hydrogels attributed to localized regions of unreacted prepolymers, resulting in variations in defect density in the samples examined. An increase in the degree of cross-linking introduced by a higher dosage of ultraviolet (UV) exposure leads to a higher elastic modulus. This implies that the elastic modulus and creep behavior of hydrogels are governed and influenced by the degree of cross-linking and defect density of the layers and interfaces. These findings can guide an optimal manufacturing pathway to obtain the desirable nanomechanical properties in 3D printed PEGDA hydrogels, critical for the performance of living cells and tissues, which can be engineered through control of the fabrication parameters.

Effect of the degree of polymerization and water content on the thermal transport phenomena in PEGDA hydrogel: a molecular-dynamics-based study.

A hydrogel is a 3D cross-linked polymer network that can absorb copious amounts of water or biological fluid. Due to their biocompatibility and non-toxicity, hydrogels have a wide range of applications in biomedical engineering. To develop hydrogels with superior thermal dissipation properties, atomistic-level studies are required to quantify the effect of the water content and the degree of polymerization. Classical mechanics-based non-equilibrium molecular dynamics (NEMD) simulations were performed in conjunction with a mathematical formulation developed by Müller-Plathe to explore the thermal conductivity of the poly(ethylene glycol)diacrylate (PEGDA) hydrogel. This work reveals that the thermal conductivity of the PEGDA hydrogel is enhanced with the increase in water content and approaches the value of the thermal conductivity of water at 85% water content in the hydrogel. The PEGDA-9 hydrogel, with a lower level of degree of polymerization, has a superior thermal conductivity than the PEGDA-13 and PEGDA-23 hydrogels. The lower level of degree of polymerization is associated with the higher mesh density of polymer chain network junctions that help to achieve the superior thermal conductivity at higher water contents. Increasing the water content improves the structural stability and compactness of the polymer chains, which can be further associated with the enhanced phonon transfer in PEGDA hydrogels. The work will help in the development of PEGDA-based hydrogels with superior thermal dissipation properties for tissue engineering.

Growth Factor Binding Peptides in Poly (Ethylene Glycol) Diacrylate (PEGDA)-Based Hydrogels for an Improved Healing Response of Human Dermal Fibroblasts.

Growth factors (GF) are critical cytokines in wound healing. However, the direct delivery of these biochemical cues into a wound site significantly increases the cost of wound dressings and can lead to a strong immunological response due to the introduction of a foreign source of GFs. To overcome this challenge, we designed a poly(ethylene glycol) diacrylate (PEGDA) hydrogel with the potential capacity to sequester autologous GFs directly from the wound site. We demonstrated that synthetic peptide sequences covalently tethered to PEGDA hydrogels physically retained human transforming growth factor beta 1 (hTGFβ1) and human vascular endothelial growth factor (hVEGF) at 3.2 and 0.6 ng/mm2, respectively. In addition, we demonstrated that retained hTGFβ1 and hVEGF enhanced human dermal fibroblasts (HDFa) average cell surface area and proliferation, respectively, and that exposure to both GFs resulted in up to 1.9-fold higher fraction of area covered relative to the control. After five days in culture, relative to the control surface, non-covalently bound hTGFβ1 significantly increased the expression of collagen type I and hTGFβ1 and downregulated vimentin and matrix metalloproteinase 1 expression. Cumulatively, the response of HDFa to hTGFβ1 aligns well with the expected response of fibroblasts during the early stages of wound healing.

Optimizing Immunofunctionalization and Cell Capture on Micromolded Hydrogels via Controlled Oxygen-Inhibited Photopolymerization.

With circulating tumor cells (CTCs) playing a critical role in cancer metastasis, the quantitation and characterization of CTCs promise to provide precise diagnostic and prognostic information in service of personalized therapies. However, as CTCs are extremely rare, high yield, high purity strategies are required to target and isolate CTCs from patient samples. Recently, we demonstrated the selective capture of CTCs upon antibody-functionalized polyethylene glycol diacrylate (PEGDA) hydrogels photopolymerized within polydimethylsiloxane (PDMS) microfluidic molds. Isolated CTC purity was subsequently enriched by selectively releasing desired cells from photodegradable hydrogel capture surfaces. However, the fabrication of these acrylate-based hydrogels by photopolymerization is subject to oxygen inhibition, which dramatically affects the physical and chemical properties of hydrogel interfaces formed in proximity to PDMS boundaries. To evaluate how antibody conjugation density and cell capture is impacted by fabrication parameters affected by oxygen inhibition, PEGDA hydrogel features were polymerized within PDMS micromolds under different UV exposure conditions and linker (acrylate-PEG-biotin) concentrations. Predictions of acrylate conversion throughout the hydrogel feature were performed using a 1D reaction-diffusion model that describes oxygen-inhibited photopolymerization. The functional consequences of photopolymerization parameters and solution stoichiometry on CTC capture were experimentally quantified and evaluated. Results show that hydrogel surfaces polymerized under shorter exposure times and with higher linker concentrations display superior functionalization and higher CTC capture efficiency. Conversely, highly cross-linked hydrogel surfaces polymerized under longer exposure times are insensitive to functionalization and display poor capture, regardless of linker concentration. By highlighting the importance of oxygen-inhibited photopolymerization, these findings provide guidelines to design micromolded hydrogels with controlled ligand expression. In addition to enhancing the selective cell capture capacity of immunofunctional hydrogels, the ability to quantifiably design hydrogel interfaces described here will improve the sensitivity of hydrogel biosensors, provide a platform to finely screen cell-matrix interactions, and generally enhance the fidelity of micromolded hydrogel features.

On modeling the infiltration of water in a PEG-DA hydrogel and the resulting swelling under unconstrained and mechanically-constrained conditions

Polyethylene glycol-diacrylate (PEG-DA) hydrogels are the most extensively studied synthetic gels in biomaterial science, and mathematical modeling of the diffusion of water into this polymer and the resultant swelling of these hydrogels is of central importance for quantitatively predicting the coupled diffusion–deformation response of these materials. Lee (2011) in his Ph.D. thesis reported on some novel experiments on diffusion and swelling of initially dry rods of PEG-DA when put in contact with water at one end — under two different mechanical boundary conditions: (a) when the rods were free to swell, with no mechanical constraints, and (b) when the rods were mechanically-constrained in a glass tube. In the unconstrained case he observed a sharp diffusion “front” that separated the swollen rubbery part and the dry glassy part of the rod, while in the constrained case no sharp diffusion front was observed. His experimental results have not been mathematically modeled in the literature. Here, we build on an existing theory for gels (Chester and Anand, 2010; 2011; Chester et al., 2015) and modify it to account for a dependence of the diffusivity of the solvent on the polymer volume fraction, and a dependence of the Flory–Huggins interaction parameter on the pressure. We show that results from our numerical simulations based on the modified theory can satisfactorily reproduce the experimental observations of Lee (2011).

Magnetic Structural Color Hydrogels for Patterned Photonic Crystals and Dynamic Camouflage

The development of programmable structural color hydrogels that can adapt to the variation of surrounding environments is of paramount importance for many important applications such as biosensing, information encryption, advanced anticounterfeiting, and adaptive camouflage. Herein, we report the design and fabrication of magnetic structural color hydrogels by introducing superparamagnetic core–shell Fe3O4@poly(4-styrenesulfonic acid-co-maleic acid) (PSSMA)@SiO2 nanoparticles into acrylamide and polyethylene glycol diacrylate hydrogels. The colloidal magnetic nanoparticles (MNPs) were able to self-organize into photonic crystals (PCs) under an external magnetic field, so that a variety of tunable structural color hydrogel patterns could be developed via magnetically induced self-assembly of colloidal MNPs and a subsequent mask-assisted UV polymerization of the pregel solution. Interestingly, the resulting hydrogels and PC patterns could swell in water, and the swelled hydrogels were able to shrink upon light irradiations, which resulted in the dynamic and reversible modulation of the structural color. As a proof-of-concept application, a chameleon-like structural color hydrogel was fabricated, and dynamic camouflage was demonstrated upon cyclic exposure to water and light irradiations. The research disclosed herein could shine a light on the development of advanced intelligent structural color hydrogels for diverse applications such as camouflage, anticounterfeiting, and beyond.

Tribo-mechanical and biological characterization of PEGDA/bioceramics composites fabricated using stereolithography

This paper aims to investigate the novel Poly(ethylene glycol) diacrylate (PEGDA)/bioceramics composites fabricated using stereolithography (SLA) for load-bearing tissue engineering applications. PEGDA hydrogel resins loaded with 1 wt% content of hydroxyapatite (HAP), calcium phosphate (CaP), and graphite (Gr) have been developed and characterized by rheological and sedimentation tests. PEGDA/bioceramics composites were characterized by mechanical, tribological, physical, and biological tests. It was found that PEGDA/HAP composite has a high tensile strength (79.1% improvement) and flexural strength (219.4% improvement), and PEGDA/Gr composite has high compressive strength (150.3% improvement) compared to unfilled PEGDA. The fractography analysis revealed that brittle fracture occurred in PEGDA and PEGDA/bioceramics composites specimens. Besides this, PEGDA and its composites are found to be thermally stable up to the temperature of ~187°C. Among all, PEGDA/Gr composite showed high compressive strength, wear resistance, low friction force, and high wettability. Additionally, PEGDA/Gr composite was found to be non-toxic, supported cellular growth, and showed similar biocompatibility as unfilled PEGDA and other composites. Thus, a comparative study has investigated the suitability and feasibility of PEGDA/bioceramic composite for tissue engineering applications.

A Tissue Adhesion-Controllable and Biocompatible Small-Scale Hydrogel Adhesive Robot.

Recently, the realization of minimally invasive medical interventions on targeted tissues using wireless small-scale medical robots has received an increasing attention. For effective implementation, such robots should have a strong adhesion capability to biological tissues and at the same time easy controlled detachment should be possible, which has been challenging. To address such issue, a small-scale soft robot with octopus-inspired hydrogel adhesive (OHA) is proposed. Hydrogels of different Young's moduli are adapted to achieve a biocompatible adhesive with strong wet adhesion by preventing the collapse of the octopus-inspired patterns during preloading. Introduction of poly(N-isopropylacrylamide) hydrogel for dome-like protuberance structure inside the sucker wall of polyethylene glycol diacrylate hydrogel provides a strong tissue attachment in underwater and at the same time enables easy detachment by temperature changes due to its temperature-dependent volume change property. It is finally demonstrated that the small-scale soft OHA robot can efficiently implement biomedical functions owing to strong adhesion and controllable detachment on biological tissues while operating inside the body. Such robots with repeatable tissue attachment and detachment possibility pave the way for future wireless soft miniature robots with minimally invasive medical interventions.

Thermal response of multi-layer UV crosslinked PEGDA hydrogels

Poly(ethylene glycol) diacrylate (PEGDA) hydrogels are ubiquitously used in a wide variety of applications in tissue engineering. In this study, the thermal response of multi-layered PEGDA hydrogels was investigated under various conditions of the temperature-controlled environments (8, 20, 37, and 45 °C) through gravimetric and volumetric methods. These multi-layered hydrogels were produced using a computer-controlled projection lithography and compared to the monolithic hydrogels fabricated through bulk photo-crosslinking. It was observed that the volume of multi-layered PEGDA hydrogels increased to about 10% at a temperature of 8 °C, while their volume decreased by 8% and 12% when stored at 37 °C and 45 °C, respectively. PEGDA hydrogel also showed an anisotropic characteristic where the axial dimensional change was about 43% higher than the lateral dimension. This finding is critical to inform the design and fabrication of PEGDA hydrogels to compensate for the axial and lateral volume changes during the application at different temperatures.

Dissolved oxygen sensing characteristics of plastic optical fiber coated with hydrogel film

This paper proposes a dissolved oxygen sensing system based on PMMA plastic optical fiber covered at one end with biocompatible PEGDA (Polyethylene glycol diacrylate) hydrogel film. PEGDA, 2-hydroxy-2-methyl-propiophenone and DI water mixture was used as hydrogel precursors, and a certain concentration of oxygen-sensitive fluorescent indicator was incorporated into it. Fluorescence quenching method was used to detect dissolved oxygen in water, the doping concentration of fluorescent indicator in the hydrogel film was optimized. The experimental results indicate that the plastic optical fiber coated with hydrogel sensing film has good reproducibility, and the response time is within 10 s. The sensing characteristics of dissolved oxygen at 30 °C, 35 °C, and 40 °C were tested respectively, and the results showed that the linearity of the system is best at 35 °C. Within the range of pH 2–12, the fluorescence intensity of the fluorescent indicator is very stable. The sensor with biocompatible material is expected to be applied to the monitor of dissolved oxygen in the domain of biomedicine.