Level Of Heavy Metal Pollution Research Articles

Characteristics and Risk Assessment of Heavy Metal Contamination in Arable Soils Developed from Different Parent Materials

This study analyzes the heavy metal pollution in cultivated soils developed from different parent materials in Yunnan Province and assesses their risk levels. The results show significant regional differences in soil heavy metal pollution, greatly influenced by the type of parent material. Cadmium (Cd) pollution is most severe in multiple parent material soil regions, particularly in areas with carbonate and purple rocks, exhibiting a high pollution risk. Other heavy metals such as zinc (Zn), copper (Cu), and lead (Pb) also show varying degrees of enrichment in different parent material zones, posing potential pollution risks. The soil pollution levels of heavy metals were classified using the geo-accumulation index method. It was found that soils developed from carbonate rocks and purple rocks have the most severe heavy metal pollution, while soils from quartzitic rocks, acidic crystalline rocks, and basalt exhibit relatively lower pollution levels. By analyzing the characteristics of heavy metal pollution in different parent materials, this study provides a scientific basis for regional soil pollution management and sustainable agricultural development.

Analysis of heavy metal characteristics and health risks of edible mushrooms in the mid-western region of China

This study determined the content of metal elements (As, Cd, Cr, Hg, Pb) in 9 edible mushrooms using ICP-MS, and evaluated the harm of long-term consumption of edible mushrooms to human health. The results showed that the concentrations of metal elements decreased in the order of Cd > As > Cr > Pb > Hg in edible mushrooms. The concentrations of Cd, As, Pb, and Hg were 22.95%, 8.20%, 1.64%, and 3.28% higher, respectively, than the maximum standards in China, whereas Cr did not exceed the limit. The detection rate of metal elements in Morchella esculenta (L.) Pers (M. esculenta), and Agaricus blazei Murill (A. blazei) were relatively high. The results of single factor evaluation and target hazard coefficient (THQ, HI) indicated that Dictyophora indusiata (Vent.ex Pers) Fisch (D. indusiata), A. blazei and M. esculenta were the main sources of risk. In addition, the HI values in ascending order were: Pb (0.43) < Cr (0.68) < Hg (0.92) < Cd (7.21) < As (14.02), indicating that Cd and As were the primary sources of health risks in edible mushrooms. To ensure food safety, it is recommended to strengthen the supervision of edible mushrooms, make reasonable choices, and reduce exposure levels of heavy metal pollution.

Assessment of Heavy Metals in Tea Plantation Soil and Their Uptake by Tieguanyin Tea Leaves and Potential Health Risk Assessment in Anxi County in Southeast China

Evaluating heavy metal pollution in tea plantation soil and conducting potential health risk assessments are crucial for ensuring the safety of tea consumers. However, soil heavy metal pollution levels and dietary exposure risk remain poorly understood, and there is no consensus on how soil physicochemical properties affect heavy metal concentrations. In this study, seventy-three soil samples and corresponding tea leaves from main tea-producing regions in Anxi County were analyzed for arsenic (As), chromium (Cr), lead (Pb) and copper (Cu) concentrations. The results showed that mean concentrations of As, Cr, Cu and Pb in the soil did not exceed respective risk screening values in China (GB 15618-2018). The concentrations of As, Cr, Cu and Pb in the tea leaves were within limiting values of the Chinese National Food Safety Standard, and the bioaccumulation factor of heavy metals in descending order was Cu &gt; Pb &gt; As &gt; Cr. The hazard index values of heavy metals indicated no potential human health risk. Soil pH, EAl, EA and AP were the main controlling factors for heavy metal in soil and tea leaves. Cu and Pb concentrations in tea leaves were positively correlated with soil Cu and Pb concentrations. These results provide a scientific basis for effective monitoring and management in tea plantations and for controlling potential risks in tea leaves.

Assessment of health risks based on different populations and sources of heavy metals on agricultural lane in Tengzhou City by APCS-MLR models.

To identify the sources of heavy metals in local soils and their risks to human health. This study quantified the concentrations of eight heavy metals in 504 soil samples collected in Tengzhou, China. The ecological risks of a single heavy metal (EI), a comprehensive ecological risk index (RI), and a health risk assessment model were used to evaluate the level of contamination in the city. The results of the research study indicate that there are different levels of heavy metal pollution in rural and urban agricultural areas in Tengzhou. Moreover, the spatial variability of mercury (Hg) is considerable, reaching 0.96, indicating a significant impact of anthropogenic activities. For the ecological risk, the heavy metal element with the highest EI value was mercury with a mean value of 67.22 and a peak value of 776.00. The heavy metal with the lowest mean EI value was Zn with only 1.03. Meanwhile, the average RI is only 128.59, but some areas have an RI as high as 842.2. The sources of heavy metals were identified using principal component analysis, correlation analysis, and an absolute principal component score multiple linear regression model (APCS-MLR). The non-carcinogenic risk for children, the carcinogenic risk for children, and the carcinogenic risk for adults were 1.23, 2.42×10-4 and 1.00×10-4, respectively, and these values exceeded their respective recommended values, and As and Cr had some carcinogenic hazards. Heavy metals in the soil come from natural, industrial, traffic and agricultural sources and represent 39.59%, 29.48%, 25.17% and 5.77%, respectively. The main source of heavy metals in local agricultural soils is the geological background, and the government needs to strengthen the monitoring of As and Cr in drinking water resources, as well as reduce traffic pollution and factory waste emissions to reduce Hg in soils.

Плотность всходов сосны обыкновенной в сосновых лесах под влиянием выбросов Карабашского медеплавильного комбината и лесных пожаров

We assessed the features of natural pine regeneration in forests with different ages of ground fires in the Southern Urals depending on the level of heavy metal pollution. Using the materials obtained from 81 sample plots laid in maturing, mature and over-mature pine forests of natural origin in three types of forest growth conditions (TFGC 1 – TFGC 3), the relationship between the density of pine seedlings and the state of forest stands (crown density, stand age, vital status index), with the characteristics of vegetation condition (total number of species, total projective cover of herb-shrub layer, projective cover of bryophytes layer), with external influences (pollution level, distance from emission source, duration of fire disturbance), and with the methodological features of the study (accounting year) was analyzed. The high variability of estimates of the density of pine seedlings did not allow us to identify the relationship between the density of seedlings and the level of pollution and/or fire disturbances. The density of seedlings is nonlinearly related to the protective cover of the herb-shrub layer. With increasing coverage of the herb-shrub layer, the density of seedlings increased in areas with high levels of pollution and decreased in areas with background pollution.

The environmental capacity of rare heavy metal calculation in the Qinghai‒Tibet Plateau region via multifractal analysis.

Accurate assessments of the soil environmental capacity are important for evaluating heavy metal pollution levels, facilitating effective prevention and control measures against such pollution. However, due to the lack of risk screening values for certain key elements, such as Rb, Sn, and Th, the assessment of the soil environmental capacity is not comprehensive. Therefore, in this study, the Menyuan-Huangzhong area of Qinghai Province was selected as the research area, and local background and risk values were established via multifractal analysis, thereby systematically examining the environmental capacity. The findings indicated that within the study area, the static environmental capacity values of 15 elements could be ranked as follows: Ba, Cu, Zn, Cr, Rb, Ni, La, Pb, Th, As, U, Sn, Tl, Cd, and Hg. In general, the residual capacity distribution of the various elements varied across the study area, with lower values primarily found in the northern and central regions and higher values obtained in the northwestern and southwestern regions. Between 2018 and 2068, there was a notable and rapid decline in the dynamic environmental capacity of Hg, Cu, and Cd in the study area. In the Menyuan-Huangzhong area of Qinghai, the average comprehensive soil environmental capacity index reached 0.91, indicating a moderate environmental capacity and slight associated health risks. The findings of this study could serve as a valuable reference for soil heavy metal pollution assessment, early warning, and management in this area; enhance the study of soil environmental capacity methods; and provide a theoretical foundation for subsequent research.

Pollution Assessment and Source Apportionment of Heavy Metals in the Surrounding Soil of Typical Mining Areas in Tongling, Anhui Province

To study the level of heavy metal pollution and ecological risks in the soil around typical mining areas in Tongling, a total of 150 soil samples were collected from the study area. The content characteristics of 10 elements, namely, As, Cd, Cr, Cu, Hg, Mn, Ni, Pb, Fe, and Zn, in the soils were analyzed. Methods including enrichment factor, the geo-accumulation index, single-factor pollution index, Nemero comprehensive pollution index, and potential ecological risk index were used to evaluate the pollution status of heavy metals in the soil of the study area. The pollution sources of heavy metals in the soil were also analyzed using correlation analysis, cluster analysis, and principal component analysis. The results showed that except for Cr and Fe, the average contents of the other eight heavy metal elements were higher than the soil background values in the study area. Pb, Zn, As, Cu, and Cd had a high degree of variation and were significantly affected by external interference. The spatial distribution showed that both Cr and Ni showed a decreasing trend from the edge to the central region, whereas the other eight heavy metals showed a decreasing trend from the central region to the surrounding areas. The pollution level of Cd and Cu in the soil of the research area was relatively severe. The overall ecological risk was at a medium to low level. Cd and Hg were the main contributing factors. As, Cd, Cu, Fe, Mn, Pb, and Zn mainly came from agricultural, industrial, and transportation sources, whereas Cr and Ni were mainly from natural sources. However, the sources of Hg were relatively complex. The research results can provide a scientific basis for the prevention and control of soil heavy metal pollution in metal mining areas, as well as the remediation of mine pollution.

Modern methods for determining heavy metals in soil

This article discusses the problem of heavy metal detection in soil and its impact on vegetation. Based on the experience of foreign and domestic research, this article discusses global fundamental problems and challenges, modern methods of heavy metal detection, as well as prospects for further research and new challenges facing the scientific community. The aim of the study is to identify modern and established methods for the detection of heavy metals in soil, such as spectral analysis methods and reflectance spectra of plant parts. The review summarizes the results of experimental studies confirming the effectiveness of the combined sampling and spectrometry method for estimating the concentration of heavy metals in soil, as well as the feasibility of using plant reflectance spectra to measure pollution. World experience confirms the expediency of using spectral approaches to determine heavy metals in soil and analyze their impact on vegetation. The results of the research have practical application in the field of ecology, agriculture and nature protection, allow effectively controlling the level of heavy metal pollution and taking measures for its elimination.

Pollution level and distribution characteristics of heavy metals and microplastics in the soils from the Qionghai Lake Wetland, Southwest China

Urban wetlands are reported to be ideal habitats for accumulation of HMs and MPs. However, study on combined pollution of HMs and MPs in soil is rare in urban wetland environment. In this study, the characteristics of HMs and MPs in the soils of the Qionghai Lake wetland in southwest China were studied by using ICP–MS, and FTIR. The results showed that the average concentration of HMs in soil ranges from 0.84 to 552.75 (mg/kg). According to the EF and Igeo analysis results, Cd and Cr in the soil were significant enriched (EF=12.64) and moderately enriched (EF=2.09), and were at the moderate to heavy pollution level (Igeo = 2.83) and the unpolluted to moderate pollution level (Igeo = 0.23), and the other elements were at a low level. MPs are emerging micropollutants in the soil environment, and the abundance (pieces/g) of MPs in the soil was 3.90, 7.00, 3.10, 3.40, 14.80, and 1.10 at Stations M1, M2, M3, M4, M8, and M9, respectively, with an average of 5.55 ± 4.92. Films represented the main microplastic shape, accounting for 81.55 %, followed by fibers, accounting for 11.33 %. The proportion of MPs with a particle size of 0.1–0.5 mm is the highest. Black, blue, and green are the predominant colors found in MPs. Polyethylene (PE) and polypropylene (PP) were the main MP materials based on FTIR identification, accounting for 52.16 % and 42.31 % of the total MPs, respectively. The pollution load index (PLI) of MPs was 2.2, which is a level Ⅰ pollution. The research on HMs and MPs in urban wetland soil is still in its preliminary stage. Our aim is to offer a fresh perspective for evaluating the pollution status and risk associated with these two pollutants in urban wetland soil, while also providing a valuable reference for subsequent studies on wetland soil pollutants.

UHPLC-QTOF-MS-Based Targeted Metabolomics Provides Novel Insights into the Accumulative Mechanism of Soil Types on the Bioactive Components of Salvia miltiorrhiza.

The root of Salvia miltiorrhiza Bunge (SMB) has been widely used to treat cardiovascular diseases. However, the contents of secondary metabolites in the roots from different production areas are significantly different, and the impact of soil factors on this accumulation remains unclear. Therefore, this study aimed to elucidate the regularity of variation between the active components and soil factors through targeted metabolomics and chemical dosimetry. Soils were collected from five different cities (A, B, C, D, and E) and transplanted into the study area. The results showed that there were significant differences in the soil fertility characteristics and heavy metal pollution levels in different soils. Ten water- and twelve lipid-soluble metabolites were identified in SMBs grown in all soil types. SMBs from D cities exhibited the highest total tanshinone content (p < 0.05). The salvianolic acid B content in SMBs from E cities was the highest (p < 0.05). Interestingly, correlation analysis revealed a significant negative correlation between the accumulation of lipid-soluble and water-soluble metabolites. Double-matrix correlation analysis demonstrated that available potassium (AK) was significantly negatively correlated with salvianolic acid B (r = -0.80, p = 0.0004) and positively correlated with tanshinone IIA (r = 0.66, p = 0.008). Conversely, cadmium (Cd) and cuprum (Cu) were significantly positively and negatively correlated with salvianolic acid B (r = 0.96, p < 0.0001 and r = 0.72, p = 0.0024) and tanshinone IIA (r = 0.40, p = 0.14 and r = 0.73, p = 0.0018), respectively. Mantel's test indicated that AK (r > 0.52, p < 0.001), Cu (r > 0.60, p < 0.005), and Cd (r > 0.31, p < 0.05) were the primary drivers of the differences in the active components of SMBs. These findings provide a theoretical framework for modulating targeted metabolites of SMB through soil factors, with significant implications for the cultivation and quality control of medicinal plants.

Identifying heavy metal sources and health risks in soil-vegetable systems of fragmented vegetable fields based on machine learning, positive matrix factorization model and Monte Carlo simulation

Urban fragmented vegetable fields offer fresh produce but pose a potential risk of heavy metal (HM) exposure. Thus, this study investigated HM sources and health risks in the soil-vegetable systems of Chongqing’s central urban area. Results indicated that Cd was the primary pollutant, with 28.33 % of soil samples exceeding the screening value. Amaranth was particularly problematic, exceeding thresholds for Cd, Hg, and Cr, and both amaranth and celery showed significantly higher HM accumulation (p < 0.05). The HM pollution level in the soil-vegetable system was moderate or above. The sources of HMs identified via Positive matrix factorization (PMF) model included agricultural activities (18.19 %), natural soil parent material (25.88 %), mixed metal smelting and transportation (30.72 %), and coal combustion (25.21 %). Furthermore, evaluations using the Random Forest (RF) model revealed an intricate interaction of factors influencing the presence of HMs, where enterprise density, population density, and road density played significant roles in HMs accumulation. Monte Carlo assessments revealed higher non-carcinogenic risks for children (Pb, As) and greater carcinogenic risks for adults (Cd). Therefore, the issue of HM pollution in soils and vegetables from fragmented fields in industrial urban areas need attention, given the potential for elevated health risks with long-term vegetable consumption.

Identification Priority Source of Heavy Metals in Urban Soils Based on Source-specific Ecological Risk Analysis in a Typical Tourist City

To understand the pollution status, distribution characteristics, and pollution sources of soil heavy metals in tourist cities in northwest China, the soil content of heavy metals As, Cd, Cr, Cu, Hg, Ni, Pb, and Zn in the main areas of Dunhuang City was collected and analyzed. The soil heavy metal pollution level was quantitatively evaluated by the methods of the geo-accumulation index and improved Nemerow pollution index, and the sources of heavy metal pollution were quantitatively analyzed using cluster analysis and the positive matrix factorization （PMF） model. The contribution rate of each pollution source to ecological risk was determined by combining the PMF model and comprehensive ecological risk index. The results showed that except for the mean contents of As and Ni, the mean contents of Cd, Cr, Cu, Hg, Pb, and Zn were all higher than the background values in Gansu Province. However, the average content of the eight elements was lower than the screening value of construction land in the Standard for Soil Pollution Risk Control of Soil Environmental Quality Construction Land （trial） （GB 36600-2018）. Among them, the enrichment of Cd, Pb, and Hg was more serious, and the exceedance rate was higher than 90%. The results of the geo-accumulation index indicated that urban soils were mainly polluted by Hg in the study area, and Cd, Cr, Cu, Pb, and Zn pollution also existed in different degrees. The improved Nemerow pollution index illustrated that the comprehensive pollution degree of the soil was clean to moderate pollution, and the overall pollution was light pollution. Based on the PMF model, we could conclude that soil heavy metals in the study area were affected by natural sources, industrial deposition sources, industrial sources, traffic sources, and comprehensive sources, and the contribution rates were 29.28%, 25.86%, 20.13%, 16.5%, and 8.23%, respectively. The specific source-integrated ecological risk assessment model found that the industrial deposition source contributed the most to the ecological risk in the study area and could be regarded as the priority control pollution source, and Hg was considered to be the priority control pollution element for ecological risk.

Geophysical and geoenvironmental engineering assessment of contaminated workstation soils in a metamorphic environment

This study aims to employ the electrical method, multi-pollution indices, and statistical optimization to establish a common ground for the utilization of contaminated soil as construction material and for agricultural purposes. Two samples each were taken at a depth of 0.5 m and 1.0 m from the eatery, auto-mechanic, car wash, and transformer workstations and at a control site in Akungba-Akoko, southwestern Nigeria. The concentrations of the following geochemical parameters were analyzed: Cr, Pb, Zn, Cd, Mn, and Cu. The resistivity distribution of the workstations’ subsurface layers was determined using Schlumberger vertical electrical sounding (VES). The generated geoelectrical sections revealed four geoelectric layers (topsoil, weathered layer, partially weathered/fracture bedrock, and bedrock) with two curve types: HA (50%) and AA (50%) across the workstations. The topsoil resistivity values (65–184 Ωm) from the VES results suggest moderately rich organic matter and averagely very fine-grained sand. The concentrations of the heavy metals in all the soil samples are within the maximum allowable concentration as stipulated by the National Environmental Standards and Regulations Enforcement Agency in the soil and are suitable for farm activities. Similarly, the geotechnical tests of the Atterberg limit, grain size analysis, compaction, and CBR revealed that all the soil samples met the criteria of a good pavement design but with poor landfill material. Pearson's correlation coefficient revealed that a strong relationship between Igeo\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${I}_{geo}$$\\end{document}-PLI, Igeo\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${I}_{geo}$$\\end{document}-RI, PLI-RI, TSR-Fines, MDD-CBR, LL-MDD, and LL-CBR exists among the multi-pollution indices, the geotechnical properties of soil, and the resistivity distribution of the topsoil. This suggests similar levels of heavy metal pollution and a common source of anthropogenic activities throughout the four workshops and provides the link between geotechnical properties and resistivity distribution for future soil management strategies. The exposure of children and adults to multiple heavy metals through inhalation at the four workstations shows no significant non-cancer or cancer risks.

A probabilistic risk assessment of heavy metal in water and sediment: An industrially affected urban river in Bangladesh.

Human welfare and biodiversity are at risk due to the deterioration of water and sediment quality. Particularly, in last few decades, global water and sediment quality degraded due to the rapid industrialization and urbanization. This study aimed to determine the concentration of nine heavy metals and metalloid (Pb, Cr, Cd, Hg, As, Mn, Ni, Cu, and Zn) and assess the ecological risks using different pollution indices (e.g., heavy metal pollution index [HPI], Nemerow pollution index [NI], geo-accumulation index [Igeo], contamination factor [CF], degree of contamination [CD] and pollution load index [PLI], ecological risk index [ERI]) in water and sediment of the Shitalakshya River, an industrially affected urban river of Bangladesh. For the first time, 20 water and sediment samples were collected across a wider geographical area of the Shitalakshya River during both monsoon and dry seasons and analyzed using the atomic absorption spectrometer. Average concentrations of heavy metals and metalloid in water were within the Bangladesh standard except for Cr (51.69 ppb) and Mn (228.20 ppb) during monsoon season, portraying potential ecological and human health risks. Besides, average concentration of Mn (549.75 and 370.93 ppb), Ni (549.75 and 370.93 ppb), and Cu (45.34 and 36.09 ppb) in sediment during both seasons were above international standard, implying risk to aquatic sediment biota. The average HPI values indicated moderate to high contamination, whereas the NI values implied polluted water in monsoon season with severe pollution in port area of the river. Similarly, Igeo, CF, CD, and PLI elucidated different levels of contamination in the sediment, particularly during dry season. The ERI values also referred moderate ecological risk in the sediment during dry season. Overall, our findings highlight the alarming level of heavy metal pollution in the Shitalakshya River, necessitating immediate action to protect the aquatic environment, sediment biota, and human health. PRACTITIONER POINTS: This study determined the concentration of heavy metals and metalloid in water and sediment of the Shitalakshya River, Bangladesh. The study revealed that the average concentration of Cr and Mn in water exceeded national standard, whereas Mn, Ni, and Cu in sediment exceeded international limit. Potential ecological risk of heavy metals was also assessed using different pollution indices. Calculated pollution indices indicated different degree of pollution, implying critical ecological condition due to heavy metal pollution in aquatic environment and sediment biota.

Root-soil-microbiome interaction in the rhizosphere of Masson pine (Pinus massoniana) under different levels of heavy metal pollution

Heavy metal pollution of the soil affects the environment and human health. Masson pine is a good candidate for phytoremediation of heavy metal in mining areas. Microorganisms in the rhizosphere can help with the accumulation of heavy metal in host plants. However, studies on its rhizosphere bacterial communities under heavy metal pollution are still limited. Therefore, in this study, the chemical and bacterial characteristics of Masson pine rhizosphere under four different levels of heavy metal pollution were investigated using 16 S rRNA gene sequencing, soil chemistry and analysis of plant enzyme activities. The results showed that soil heavy metal content, plant oxidative stress and microbial diversity damage were lower the farther they were from the mine dump. The co-occurrence network relationship of slightly polluted soils (C1 and C2) was more complicated than that of highly polluted soils (C3 and C4). Relative abundance analysis indicated Sphingomonas and Pseudolabrys were more abundant in slightly polluted soils (C1 and C2), while Gaiella and Haliangium were more abundant in highly polluted soils (C3 and C4). LEfSe analysis indicated Burkholderiaceae, Xanthobacteraceae, Gemmatimonadaceae, Gaiellaceae were significantly enriched in C1 to C4 site, respectively. Mantel analysis showed that available cadmium (Cd) contents of soil was the most important factor influencing the bacterial community assembly. Correlation analysis showed that eight bacterial genus were significantly positively associated with soil available Cd content. To the best of our knowledge, this is the first study to investigate the rhizospheric bacterial community of Masson pine trees under different degrees of heavy metal contamination, which lays the foundation for beneficial bacteria-based phytoremediation using Masson pines in the future.

Assessment of heavy metal pollution level, ecological and human health risks in surface water of Narmada River, India

Assessment of heavy metal pollution level, ecological and human health risks in surface water of Narmada River, India

Environmental assessment of toxic heavy metals in bottom sediments of the Sharm Obhur, Jeddah, Saudi Arabia

The concentrations, spatial distributions, pollution level, and health risks of heavy metals in sediments of the Sharm Obhur, Northern Jeddah, Saudi Arabia were evaluated. Average concentrations were found to be: Cr > Zn > Ni > Cu > As>Pb with the highest concentrations found near the head of the sharm, and decreasing towards the mouth. Environmental indices, together with the statistical analyses, showed that the sharm experiences a low to moderate degree of pollution. Sampling sites with heavy metal contamination are concentrated near the head and the southern coast of the sharm, where intensive human activities associated with a boat dock, construction, and recreation are common. The mean carcinogenic risk (CR) values of As, Cr and Ni are at permissible level suggesting unlikely adverse impacts of heavy metals on human health. Despite acceptable CR values; however, serious non-carcinogenic and carcinogenic health threats from metals may yet be an issue particularly for sensitive populations such as children.

Spatial distribution, pollution level and human health risk assessment of heavy metals in urban street dust at neighbourhood scale

Urban street dust (UStD) is a vital issue for human health and is crucial for urban sustainability. This study aims to enhance the creation of safe, affordable, and resilient cities by examining environmental contamination and health risks in urban residential areas. Specifically, it investigates the concentrations and spatial distribution of chromium (Cr), cadmium (Cd), nickel (Ni), copper (Cu), lead (Pb), and zinc (Zn) in UStD in Yenimahalle, Ankara. The mean concentrations of Zn, Cr, Pb, Cd, Ni, and Cu in UStD were 97.98, 66.88, 55.22, 52.45, 38.37, and 3.81 mg/kg, respectively. The geoaccumulation pollution index (Igeo) values for these elements were: Cd (5.12), Ni (1.61), Cr (1.21), Pb (1.13), Cu (0.78), and Zn (0.24). These indices indicate that the area is moderately polluted with Cr, Pb, and Ni, uncontaminated to moderately contaminated with Cu and Zn, and extremely polluted with Cd. The hazard index (HI) values for Cr, Cd, Ni, Cu, Pb, and Zn were below the non-carcinogenic risk threshold for adults, indicating no significant risk. However, for children, the HI values for Pb, Ni, Cd, and Zn were 3.37, 1.80, 1.25, and 1.25, respectively, suggesting a higher risk. Carcinogenic risk (RI) of Cd, Ni, and Pb was significant for both children and adults, indicating that exposure through ingestion, inhalation, and dermal contact is hazardous. The findings highlight the need for strategic mitigation measures for both natural and anthropogenic activities, providing essential insights for residents, policymakers, stakeholders, and urban planners.

Distribution Characteristics and Assessment of Heavy Metal Pollution in Sediments of Fengyuan River, Guangdong

Mining activities and industrial production discharges often generate heavy metal pollution and pose serious environmental impacts. It is of great significance to study the pollution status and sources of heavy metals in polluted rivers for environmental pollution control. This paper determines the concentration of 34 heavy metals, including As, Cd, Cr, Cu, Ni, Pb, and Zn, in the Fengyuan River and tailing pond in Yunfu City, Guangdong Province. The potential ecological risk index (RI) and integrated pollution index (IPI) were used to evaluate the spatial distribution and pollution levels of heavy metals, and the possible source and enrichment of heavy metal were identified and assessed using enrichment factor (EF). The results showed that Cd and Tl in the slag of the tailings pond were the most serious; The potential ecological risk index indicates that Cd in the sediment of the Fengyuan River is a very severe ecological risk, As and Pb caused heavy and moderate ecological risk, respectively, while, Co, Cr, Cu, Mn, Ni, V, and Zn constituted mild ecological risks; The integrated pollution index shows that all the sampling sites are above high pollution. The average enrichment factor of Cd in surface sediments reached 28.11. The EF values of As, Cu, Mn, Pb, and Zn were all greater than 1. The RI, IPI, and EF produced similar levels of heavy metal pollution in sediments, thereby confirming each other’s results, indicating that the Fengyuan River is heavily contaminated, and As, Cd, Mn, Pb, and Zn were likely to have an effect on the aquatic ecosystem. According to principal component and hierarchical cluster analyses, the Fengyuan River may contain heavy metals from a variety of sources, such as tailings ponds, industrial parks, chemical effluent, and more. In addition, correlation analysis indicates that total organic carbon is significantly correlated with the concentrations of As and Cr, respectively, and combining EF suggests that cluster 1 containing As, Mn, and Pb and cluster 2 containing Cd and Zn may be derived from similar anthropogenic sources. This study can provide meaningful basic information for environmental development planning and decision-making associated with human health in the region.

The stabilization ability of NaA zeolite derived from fly ash for lead and cadmium in soil: Mechanisms and evaluation of effectiveness

Developing technologies aimed at ecologically restoring is of great significance in addressing the problem of heavy metal pollution. In this study, NaA zeolites (FAZ) originated from fly ash with outstanding performance were prepared by alkali fusion hydrothermal method and used for the solidification and stabilization of heavy metals in soil. After systematic evaluation, it was found that FAZ may lower the leaching concentration of lead (Pb) in soil to <1 mg/kg and increase the stabilization rate of Pb to 80 % in the single Pb-contaminated soil, lower the leaching concentration of cadmium (Cd) in soil to <3 mg/kg and increase the stabilization rate of Cd to 60 % in the single Cd-contaminated soil, and lower the leaching concentration of Pb to 0.15 mg/kg and the leaching concentration of Cd to 0.74 mg/kg in PbCd complex polluted soil. Additionally, Pb stabilization rates reach 60 % and Cd stabilization rates reach 30 %, respectively. Ion exchange is primarily responsible for the adsorption and solidification of Pb and Cd in soil by FAZ. Generally, FAZ has a wide range of applications in the rehabilitation of contaminated soil and significantly lowers the level of heavy metal pollution in soil.