Polarization-maintaining Optical Fiber Research Articles

High-power polarization-maintaining LP11-mode fiber laser based on long-period fiber grating for precise welding.

An LP11-mode output all-fiber laser was presented, utilizing long-period fiber gratings (LPFGs) and polarization-maintaining optical fiber (PMF). The LPFG was designed and fabricated, achieving a 90.56% efficiency in LP01 to LP11 mode conversion. Furthermore, the transmission stability of LP11-mode in the PMF was also explored, with the spatial mode overlap ratio exceeding 0.95. Ultimately, the high-power polarization-maintaining (PM) fiber laser, capable of the LP11 mode output, was constructed, with the output power of 600 W and the beam quality M2 of 2.84. During the process of welding a thick Al-plate, the LP11 fiber laser exhibits a notable 1.88 times greater depth of fusion compared to the commercial single-mode fiber laser, when operating at the laser welding head speed of 100 mm/s. For applications demanding non-circular symmetric high-order modes, this research holds substantial potential for widespread adoption within the field of industrial processing.

Femtotesla 87Rb magnetometer based on a coaxial pump-probe beam delivery system

Advancements in highly sensitive and miniaturized spin-exchange relaxation-free atomic magnetometers have attracted significant attention. Although dual-beam magnetometers with high sensitivity have been developed, miniaturization while maintaining sensitivity remains challenging. In this study, we present a novel magnetometer configuration featuring a coaxial pump-probe beam delivery system facilitated by a single polarization-maintaining optical fiber. Utilizing polarized atoms to probe the diffuse central region of a ring pump beam, we achieved optimized performance through parameter adjustments, including the power of the pump and probe beams, modulation index, and other key factors. The magnetometer exhibited a remarkable sensitivity of 15 fT/Hz1/2. In addition, we introduced a novel method for evaluating the polarizability of alkali metals. The proposed magnetometer configuration shows considerable potential for advancing the field of highly sensitive miniaturized atomic magnetometers that are well suited for magnetocardiography (MCG) and magnetoencephalography (MEG) applications.

TE/TM mode electro-optic conversion based on a titanium diffusion lithium niobate waveguide with a polarization-maintained fiber structure.

For the development of photonic integrated circuits and lithium niobate (L i N b O 3, LN) optical waveguide technology, the implementation and application of polarization devices based on LN are also becoming more widespread, where titanium (Ti)-diffused LN waveguides form the basis of many important electro-optic (EO) integrated optical devices. Moreover, utilizing polarization conversion has the potential to enhance both the effectiveness and capacity of optical transmission. Thus, we have presented an EO polarization mode converter packaging with PANDA polarization-maintaining optical fibers (PMFs) in the broadband wavelength range (1440-1620nm) to obtain the multiwavelength modulation, featuring the wavelength tunability. Additionally, the fabricated device is able to achieve transverse electric (TE) to transverse magnetic (TM) mode conversion efficiently with the applied voltage of ±, which provides high conversion efficiency. Importantly, our device also features a high-frequency response of about 600MHz with overall insertion loss below 5dB. The rapid development of LN-based polarization devices holds great promise for chip-integrated systems in the field of polarization telecommunication.

Low‐Temperature Synthesis of Silicon Oxynitride‐Doped Si for Tunable Bragg Gratings Homogeneously Deposited on Si, SiO2, and Borosilicate Substrates and the tip of SM and PM Optical Fibers (Advanced Optical Materials 12/2023)

In article number 2300094, Ali Karatutlu and colleagues describe the synthesis of silicon oxynitride-doped silicon and their use in Bragg gratings on bulk substrates and the tip of optical fibers with high reflectivity over 22 dB, including single-mode and polarization-maintaining optical fibers.

Plasmonic Biosensor on the End-Facet of a Dual-Core Single-Mode Optical Fiber.

Optical biosensors target widespread applications, such as drug discovery, medical diagnostics, food quality control, and environmental monitoring. Here, we propose a novel plasmonic biosensor on the end-facet of a dual-core single-mode optical fiber. The concept uses slanted metal gratings on each core, interconnected by a metal stripe biosensing waveguide to couple the cores via the propagation of surface plasmons along the end facet. The scheme enables operation in transmission (core-to-core), thereby eliminating the need to separate the reflected light from the incident light. Importantly, this simplifies and reduces the cost of the interrogation setup because a broadband polarization-maintaining optical fiber coupler or circulator is not required. The proposed biosensor enables remote sensing because the interrogation optoelectronics can be located remotely. In vivo biosensing and brain studies are also enabled because the end-facet can be inserted into a living body, once properly packaged. It can also be dipped into a vial, precluding the need for microfluidic channels or pumps. Bulk sensitivities of 880 nm/RIU and surface sensitivities of 1 nm/nm are predicted under spectral interrogation using cross-correlation analysis. The configuration is embodied by robust and experimentally realizable designs that can be fabricated, e.g., using metal evaporation and focused ion beam milling.

Compact, low-cost, and broadband terahertz time-domain spectrometer.

Terahertz time-domain spectroscopy (THz-TDS) is a powerful technique that enables the characterization of a large range of bulk materials, devices, and products. Although this technique has been increasingly used in research and industry, the standard THz-TDS configuration relying on the use of a near-infrared (NIR) laser source remains experimentally complex and relatively costly, impeding its availability to those without the expertise to build a high-performance setup based on nonlinear optics or without the financial means to acquire a commercial unit. Broadband THz-TDS systems require an even larger financial investment, primarily because the generation and detection of spectral components exceeding 3THz typically need an ultrafast NIR source delivering sub-100-fs pulses. Such an ultrafast source can be bulky and cost upwards of $100,000. Here, we present a broadband, compact, and portable THz-TDS system comprising three modules that allow for the implementation of a single low-cost ultrafast laser, hence significantly decreasing the overall cost of the system. In the first module, the output laser pulses are spectrally broadened through nonlinear propagation in a polarization-maintaining optical fiber and then temporally compressed to achieve a higher peak power. The other two modules utilize thick nonlinear crystals with periodically patterned surfaces that diffract NIR pulses and optimize the efficiency of THz generation and detection processes by enabling a noncollinear beam geometry. Phase-matching conditions in the nonlinear crystals are controlled by the period of the gratings to gain access to a large spectral THz bandwidth. The whole system, combining these three modules, provides access to a THz spectrum peaking at 3.5THz and extending beyond 6THz with a maximum dynamic range of 50dB for time-resolved spectroscopy applications. We demonstrate the functionality of this configuration by performing THz spectroscopy measurements of water vapor contained within a closed cell. Our compact system design paves the way towards a high-performance, yet cost-effective, THz-TDS system that can be readily used in academia and industry.

Measurement of the birefringence variation induced by dihydrogen diffusion into a polarization-maintaining fiber.

We report continuous measurements of the transmission spectrum of a fiber loop mirror interferometer composed of a Panda-type polarization-maintaining (PM) optical fiber during the diffusion of dihydrogen (H2) gas into the fiber. Birefringence variation is measured through the wavelength shift of the interferometer spectrum when the PM fiber is inserted into a gas chamber with H2 concentration from 1.5 to 3.5 vol.% at 75 bar and 70°C. The measurements correlated with simulation results of H2 diffusion into the fiber lead to a birefringence variation of -4.25 × 10-8 per mol m-3 of H2 concentration in the fiber, with a birefringence variation as low as -9.9×10-8 induced by 0.031 μmol m-1 of H2 dissolved in the single-mode silica fiber (for 1.5 vol.%). These results highlight a modification of the strain distribution in the PM fiber, induced by H2 diffusion, leading to a variation of the birefringence that could deteriorate the performances of fiber devices or improve H2 gas sensors.

Long Distance Military Fiber-Optic Polarization Sensor Improved by an Optical Amplifier

The ever-increasing demands for the use of fiber-optic sensors powered by long optical fibers is forcing developers to solve problems associated with powering these remote sensors. Due to their non-electric character, these sensors are suitable for many uses, including military applications. The Army of the Czech Republic is very interested in this type of optical fiber sensor as it fulfils the significant prerequisites for use in military areas. However, the army’s requirements are challenging because they require long supply cables in which there is significant attenuation of optical power. At the same time, there is a need for high sensitivity. The subject of our research team’s work was to use amplifiers to power these sensors. The army already uses this type of sensor for short distances as it cannot ignite a gas mixture with an explosive concentration and thus meet the strict requirements of the explosion-poof standard. The novelty of our research lies in the discovered measurement technique that allows the sensors to be powered remotely and in the saving of optical fibers by utilizing duplex communication with a circulator. Furthermore, the research presents an innovative approach to the optimization of the entire sensor by using a bidirectional, sensory, polarization-maintaining optical fiber. The proposed sensor was first verified in laboratory conditions at the Optoelectronics Laboratory of the University of Defense in Brno, and further tests were carried out in the military training areas of Boletice and Březina in the Czech Republic, which is a member of North Atlantic Treaty Organization.

Low‐Temperature Synthesis of Silicon Oxynitride‐Doped Si for Tunable Bragg Gratings Homogeneously Deposited on Si, SiO2, and Borosilicate Substrates and the tip of SM and PM Optical Fibers

AbstractOptical tunability and repeatability are essential in fabricating optoelectronic devices from waveguides to Bragg gratings (BGs) for high‐energy, high‐power, mode‐locking, and sensing applications. For this purpose, a controlled adjustment in the optical properties, including the refractive index of the deposited nanolayers, becomes critical. This study reveals that silicon oxynitride (SiON) doping into silicon (Si) offers a new way for the preparation of novel Si‐based devices with an emphasis on the BGs for filtering a particular portion of an electromagnetic spectrum, including the wavelengths of 800, 976, 1550, and 1840 nm. Control on the incident angle dependence of the BGs is demonstrated at Watt‐level for the wavelength of 976 nm. Amorphous SiON‐doped Si layers on alternating SiO2 can be synthesized on bulk substrates and different optical fibers at relatively low temperatures with wide and narrow bandwidths. The high reflectivity of the novel Si‐based BGs reveals over −22 dB reflection using typical optical fibers, including standardsingle‐mode fibers and high‐birefringent polarization‐maintaining (PM) fibers. The polarized transmission measurement over the BG on the PMfiber shows the BGs do not deteriorate the PM properties, strongly yielding a beat length of 1.68 mm and birefringence of 9.2 × 10−4 at the telecom C band.

Dynamic polarization response of polarization-maintaining fibers by periodic thermal cycling method.

We report a periodic thermal cycling method to investigate the dynamic response of the polarization of a laser propagating through polarization-maintaining (PM) optical fiber, driven by periodic weak temperature modulation. Consequently, temperature modulation on the surface of the coating material of the PM fiber was found to cause a continuous periodic change in the polarization state of the output laser without approaching the steady state of the resulting dynamic polarization response. Additionally, the response was found to depend on the temperature-modulation frequency and amplitude. These experimental results are qualitatively in good agreement with that of the simple theoretical model. Our research would be applied not only to the method of measuring properties of a PM optical fiber by utilizing the continuous modulation of the differential refractive index with a wide modulation-frequency range but also to various applications of the dynamic control of the periodic refractive index in materials.

Algorithm for Solving a System of Coupled Nonlinear Schrödinger Equations by the Split-Step Method to Describe the Evolution of a High-Power Femtosecond Optical Pulse in an Optical Polarization Maintaining Fiber

This article proposes an advanced algorithm for the numerical solution of a coupled nonlinear Schrödinger equations system describing the evolution of a high-power femtosecond optical pulse in a single-mode polarization-maintaining optical fiber. We use the algorithm based on a variant of the split-step method with the Madelung transform to calculate the complex amplitude when executing a nonlinear operator. In contrast to the known solution, the proposed algorithm eliminates the need to numerically solve differential equations directly, concerning the phase of complex amplitude when executing the nonlinear operator. This made it possible, other things being equal, to reduce the computation time by more than four times.

Compact, single-mode fiber-coupled, correlated photon pair source based on type-I beta-barium borate crystal

A small, portable, high-flux correlated photon-pair source has been designed and constructed from simple opto-mechanical parts. Unique to this device is its straightforward alignment process, together with the direct coupling of signal and idler photons into polarization-maintaining single-mode optical fibers. Spontaneous parametric down-conversion is used to produce photon pairs in β-barium borate (BBO) at a center wavelength of 810 nm. Owing to the applied type-I phase-matching, coincident photons have identical polarization. The estimated fiber-coupling efficiency is 51%, the measured photon and coincidence flux are 636 and 130 kHz/mW, respectively, normalized to pump power (44 mW). The source has an extremely wide wavelength spectrum of 202-nm FWHM, measured at the fiber output, which limits the actual heralding ratio to 20%.

Fabrication of biaxial polarization-maintaining optical fiber with ultra-low bending-dependent polarization extinction ratio deterioration

Different applications, including interferometers, gyroscopes, and frequency combs, require a single polarized light transmission by maintaining this property against the environmental perturbation. As a new type of polarization-maintaining (PM) fiber, a biaxial PM fiber was fabricated over 30 dB of high polarization extinction ratio (PER) values among two orthogonal axes over a fiber length of 110 m. The PM fiber was manufactured with a combination of an elliptical core and Panda-type geometries. The PER values were demonstrated to be preserved at harsh temperature conditions from −55 °C to +85 °C. The bending loss measurements indicate the biaxial PM fiber has ultra-low bending dependent PER deterioration (<0.5 %) at various bending diameters from 12 mm to 5 mm. The biaxial PM property was also confirmed by the group beat length measurements and found to be less than 1.5 mm at 1550 nm. The optical time-domain reflectometer (OTDR) measurements show that the optical loss of the biaxial PM fiber was below 1.5 dB/km over 3kmlength. The mode-field diameter (MFD) and the numerical aperture (NA) values were also reported along two polarized axes. This novel PM fiber offers a single solution for the elliptical and Panda-type PM fibers utilized for integrated fiber-based sensors and instruments.

Polarization-maintaining and radiation resistant optical fiber with germanosilicate elliptical core

This paper aims to consider fabrication of single-mode polarization-maintaining (PM) optical fibers with elliptical core, doped with 20 mol. % GeO2 and to study their optical properties and radiation resistance. The optical fiber preform was fabricated by chemical vapor deposition method. The low-oxygen central piece of the core in the preform was removed by high-temperature chemical gas-phase etching. The single-mode optical fibers 125 µm in diameter, with 65 µm thick polymer protection coating were drawn. The results of measurements of the optical properties at a wavelength of 1.3–1.55 μm confirmed that the highly-doped GeO2 optical fiber waveguides have a low optical loss and high radiation resistance owing to gas phase etching. Polarization-maintaining factor (h-parameter) of ≈ 8∙10-6 m−1 was achieved. As to the radiation resistance, our single-mode PM optical fiber with elliptical core appears to be quite competitive to the known PANDA PM optical fibers with a core made of pure silica glass.

Fast polarization control for optical frequency combs.

Polarization of an optical frequency comb is electrically controlled using a waveguide electro-optic phase modulator (WG-EOM). Owing to the low operation voltage and wide electric bandwidth of the WG-EOM, fast polarization control is possible. It is found that birefringence of the WG-EOM and polarization-maintaining optical fibers causes polarization-dependent pulse separation, which makes polarization control of the optical frequency comb impossible. Therefore, compensation of the birefringence is required for polarization control. In the experiment, a delay line in free space is used for birefringence compensation, and pulse-to-pulse polarization control of an optical frequency comb (with a repetition rate of 100 MHz) is demonstrated.

MCVD method for manufacturing polarization-maintaining and radiation resistant optical fiber with germanosilicate elliptical core

The aim of this work was to develop a fabrication process of single-mode polarization-maintaining germanosilicate optical fibers with elliptical core (GOFEC) doped with 20 mol % GeO2. The fiber preform was fabricated by MCVD method. The low-oxygen central piece of the core in the preform was removed by high-temperature chemical gas-phase etching. The influence of γ-radiation with a dose rate of 1 Gy/s on the optical losses in GOFEC at a wavelength of 1550 nm and at 25°C and −60°C were investigated. Their radiation resistance at −60°C is proved to surpass that of the existing analogous fibers. It has been found that the radiation-induced attenuation in such highly doped GeO2 single-mode fibers is higher than that in multimode fibers. In contrast to multimode fibers, radiation resistance in single-mode fibers depends on the material of the core and cladding. As to the radiation resistance, these GOFEC are comparable with the fiber of PANDA type with a pure silica glass core.

Temperature Sensor Based on Fiber Ring Laser With Cascaded Fiber Optic Sagnac Interferometers

A new temperature fiber ring laser (FRL) sensor based on a cascaded Sagnac loops fiber structure is proposed and experimentally demonstrated. The optical FRL sensor consists of cascaded Sagnac loops by inserting two polarization-maintaining optical fibers (PMF) with slightly different lengths. PMF with length of 56 cm and 75 cm are used in Sagnac loops as a filter and sensing unit in laser cavity. The working principle of the sensor is based on the phase shift (θ) caused by birefringence between two principal polarization modes and enhance the sensitivity by constructing a Vernier-scale. In an appropriate temperature range (25 °C - 31 °C), the detection sensitivity of FRL sensor based on a cascaded Sagnac structure is significantly higher than other FRL sensors. Thanks to the laser sensing system, the sensitivity can be modulated by changing the free spectral range (FSR). The experimental results show that the temperature sensitivity of the cascade Sagnac structure sensor is - 4.031 nm / °C, which is five times higher than that of FRL sensor base on the single Sagnac structure.

Distributed measurement of the Brillouin dynamic grating spectrum using the correlation-domain method with a fixed correlation peak position

We demonstrated the distributed measurement of Brillouin dynamic grating spectra along a polarization-maintaining optical fiber without moving the correlation peak position, which is a measurement position scanned in the conventional correlation-domain methods. Our results present new possibilities for developing spatially resolved measurement methods using the correlation-domain technique.

Multi-wavelength Er–Yb-doped fibre ring laser using a double-pass Mach–Zehnder interferometer with a Sagnac interferometer

In this paper, the performance of a switchable multi-wavelength Er–Yb-doped fibre ring laser incorporating a comb filter is described. The comb filter was developed by using the double-pass Mach–Zehnder interferometer with a Sagnac interferometer (DMZI–SI) arranged in series, a 10-m-long PANDA-type polarisation-maintaining optical fibre, and polarisation controllers (PCs). The laser output can be switched from 1536 to 1548 nm (C-band) via careful adjustment of the PCs. A side-mode separation ratio, greater than 28 dB, was obtained to facilitate stable single-, double-, quadruple-, and quintuple-wavelength emissions, with spectral power and wavelength fluctuations of 0.47–1.06 dB and 0.01–0.06 nm, respectively. The measurements were performed for 60 min at 25 °C. The proposed comb-filter configuration facilitates the double-clad fibre ring laser to realise switchable multi-wavelength emission. Experimental results reveal that the proposed laser demonstrates high stability and significantly improved performance compared to the existing DMZI–SI filter-based systems. This indicates their potential for use in applications involving optical sensing, communication systems, and microwave generation.

Polarization-Maintaining Anti-Resonant Hollow-Core Optical Fibers

Polarization-Maintaining Anti-Resonant Hollow-Core Optical Fibers