Pluronic Triblock Copolymer Research Articles

Order–disorder–order mesophase transitions in self-assembled mesoporous alumina for enhanced CO2 adsorption

The addition of a hydrophobic micelle pore expander to self-assembling mesostructured hybrid materials enables access to new combinations with differently ordered mesophases and enhanced structural properties. Here we detail our investigations into the influence of 1,3,5-trimethylbenzene (TMB) on the self-assembly behaviors of an F127 Pluronic triblock copolymer with an aluminum oxide sol additive. By varying the chemical mixing sequence, the TMB-to-F127 mass ratio and the acid-to-metal molar ratio, we observe that TMB exhibits dual roles, functioning both as a hydrophobic swelling agent and as a low dielectric co-solvent. This induces a mesophase transition from an ordered p6mm lattice to a disordered state and subsequently back to the ordered p6mm phase. We propose a structure formation mechanism based on the DLVO theory to describe the thermodynamics and kinetic mobility of the hybrid micelles during the order-disorder and ensuing disorder-order mesophase transitions. The resulting ordered mesoporous alumina structures, with considerable pore sizes (up to 12 nm), high surface areas (up to 314 m2/g) and pore volumes (up to 0.74 cm3/g), organized pore geometry and variable inorganic wall thicknesses, have shown excellent CO2 adsorption capacities and are appealing for various applications, including stable high temperature catalyst supports, separation and sensing.

Solution-Phase Synthesis of KCl Nanocrystals Templated by PEO-PPO-PEO Triblock Copolymers Micelles.

The current work introduces the synthesis of inorganic salt nano/micro-crystals during the reduction of hydrogen tetrachloroaurate(III) by Pluronic triblock copolymers (P123, PEO20-PPO70-PEO20). The morphologies and component were confirmed using an electron microscope with an electronic differential system (EDS), and the crystal structures were determined with X-ray diffraction (XRD). The morphologies highly depend on the concentrations of Pluronic and pH values. The mean size of the nanocrystal and hollow micro-crystal were controlled typically in the range of 32-150 nm (side length) and 1.4 μm, respectively. Different from the electrospray-ionization (EI) method, a model in which KCl forms a supersaturated solution in the micellar core of Pluronic is used to explain the formation process. This work provides the new insight that inorganic salt nanocrystals could be synthesized with the template of micelles in pure aqueous solutions.

Development of Pluoronic nanoparticles of fluorocoxib A for endoscopic fluorescence imaging of colonic adenomas.

Current white light colonoscopy suffers from many limitations that allow 22% to 32% of preneoplastic lesions to remain undetected. This high number of false negatives contributes to the appearance of interval malignancies, defined as neoplasms diagnosed between screening colonoscopies at a rate of 2% to 6%. The shortcomings of today's white light-based colorectal cancer screening are addressed by colonoscopic fluorescence imaging of preneoplastic lesions using targeted fluorescent agents to enhance contrast between the lesion and the surrounding normal colonic epithelium. We describe the development of Pluronic® nanoparticles of fluorocoxib A (FA), a fluorescent cyclooxygenase-2 (COX-2) inhibitor that enables targeted imaging of inflammation and cancer in numerous animal models, for endoscopic florescence imaging of colonic adenomas. We formulated FA, a fluorescent COX-2 inhibitor, or fluorocoxib negative control (FNC), a nontargeted fluorophore and a negative control for FA, in micellar nanoparticles of FDA approved Pluronic tri-block co-polymer using a bulk solvent evaporation method. This afforded FA-loaded micellar nanoparticles (FA-NPs) or FNC-loaded micellar nanoparticles (FNC-NPs) with the hydrodynamic diameters ( ) of and and the zeta potentials ( ) of and , respectively. We intravenously injected B6;129 mice bearing colonic adenomas induced by azoxymethane and dextran-sodium sulfate with FA-loaded Pluronic nanoparticles (FA-NPs). The diffusion-mediated local FA release and its binding to COX-2 enzyme allowed for clear detection of adenomas with high signal-to-noise ratios. The COX-2 targeted delivery and tumor retention were validated by negligible tumor fluorescence detected upon colonoscopic imaging of adenoma-bearing mice injected with Pluronic nanoparticles of FNC or of animals predosed with the COX-2 inhibitor, celecoxib, followed by intravenous dosing of FA-NPs. These results demonstrate that the formulation of FA in Pluronic nanoparticles overcomes a significant hurdle to its clinical development for early detection of colorectal neoplasms by fluorescence endoscopy.

Morphology evolution of Hydroxyapatite: Synergistic effects and water treatment application

Shuttle/flower-like hydroxyapatie crystals have been fabricated by a simple hydrothermal treatment under the combined action of sodium citrate and a pluronic triblock copolymer (F127). The morphology characterization results demonstrate that the hierarchical flower-like hydroxyapatite microcrystals are evolved from the one-dimensional hydroxyapatie nanoshuttles. The effects of the additives and hydrothermal time on the morphology are studied. Based on the experiment results, this work presents a possible growth mechanism for the hydroxyapatite morphology. Remarkably, the adsorption experiments results exhibit that the HAP microflower have fast adsorption ability for heavy metal ions.

Phase behavior of medium-length hydrophobically associating PEO-PPO multiblock copolymers in aqueous media

HypothesisThe micellization of block copolymers of poly(ethylene oxide) (PEO) and poly(propylene oxide) (PPO) is driven by the dehydration of PPO at elevated temperatures. At low concentrations, a viscous solution of isolated micelles is obtained, whereas at higher concentrations, crowding of micelles results in an elastic gel. Alternating PEO-PPO multiblock copolymers are expected to exhibit different phase behavior, with altered phase boundaries and thermodynamics, as compared to PEO-PPO-PEO triblock copolymers (Pluronics®) with equal hydrophobicity, thereby proving the pivotal role of copolymer architecture and molecular weight. ExperimentsMultiple characterization techniques were used to map the phase behavior as a function of temperature and concentration of PEO-PPO multiblock copolymers (ExpertGel®) in aqueous solution. These techniques include shear rheology, differential and adiabatic scanning calorimetry, isothermal titration calorimetry and light transmittance. The micellar size and topology were studied by dynamic light scattering. FindingsMultiblocks have lower transition temperatures and higher thermodynamic driving forces for micellization as compared to triblocks due to the presence of more than one PPO block per chain. With increasing concentration, the multiblock copolymers in solution gradually evolve into a viscoelastic network formed by soluble bridges in between micellar nodes, whereas hairy triblock micelles jam into liquid crystalline phases resembling an elastic colloidal crystal.

Approaches to the design of efficient and stable catalysts for biofuel reforming into syngas: doping the mesoporous MgAl2O4 support with transition metal cations.

The mesoporous MgAl2O4 support is promising for the design of efficient and stable to coking catalysts for natural gas and biofuel reforming into syngas. This work aims at doping this support with transition metal cations (Fe, Cr, Ti) to prevent the incorporation of Ni and rare-earth cations (Pr, Ce, Zr), loaded by impregnation, into its lattice along with providing additional sites for CO2 activation required to prevent coking. Doped MgAl1.9Me0.1O4 (Me = Fe, Ti, Cr) mesoporous supports prepared by the one-pot evaporation-induced self-assembly method with Pluronic P123 triblock copolymers were single-phase spinels. Their specific surface area varies in the range of 115-200 m2 g-1, decreasing to 90-110 m2 g-1 after successive addition of the supporting nanocomposite active component 10 wt% Pr0.3Ce0.35Zr0.35O2 + (5 wt% Ni + 1% Ru) by impregnation. Mössbauer spectroscopy for iron-doped spinels confirmed the spatially uniform distribution of Fe3+ cations in the lattice without clustering being mainly located at the octahedral positions. Fourier-transform infrared spectroscopy of the adsorbed CO molecules was performed to estimate the surface density of metal sites. In methane dry reforming, the positive effect of MgAl2O4 support doping was observed from both a higher turn-over frequency as compared with the catalyst on the undoped support as well as the highest efficient first-order rate constant for the Cr-doped catalyst as compared with published data for a variety of Ni-containing catalysts based on the alumina support. In the reaction of ethanol steam reforming, the efficiency of catalysts on the doped supports is comparable, while exceeding that of Ni-containing supported catalysts reported in the literature. Coking stability was provided by a high oxygen mobility in the surface layers estimated by the oxygen isotope heteroexchange with C18O2. A high efficiency and coking stability were demonstrated in the reactions of methane dry reforming and ethanol dry and steam reforming in concentrated feeds for the honeycomb catalyst with a nanocomposite active component on the Fe-doped MgAl2O4 support loaded on the FeCrAl-alloy foil substrate.

Amphiphilic interaction-mediated ordering of nanoparticles in Pickering emulsion droplets.

For various industrial processes, the stabilization of an oil phase is crucial and demands a proper balance of complex interactions in an emulsion system. In Pickering emulsions, this is achieved by introducing nanoparticles, which become organized at the oil-water interface. The influence of interparticle interactions towards the formation of a stable emulsion and the ordering of the stabilizing nanoparticles is intriguing and needs attention. In this work, the role of amphiphilic interactions between hydrophilic silica nanoparticles and the Pluronic F127 tri-block co-polymer towards the spontaneous formation of a fairly stable Pickering emulsion has been studied using small-angle X-ray scattering. Unlike the usual random arrangements of the nanoparticles in a conventional Pickering emulsion, we observed highly organized silica nanoparticles at the oil-water interface. The established standard raspberry structural model of the Pickering emulsion fails to explain such strong ordering as observed in the present case. A plausible formation mechanism of the present Pickering emulsion with a high on-surface silica correlation is elucidated on the basis of the combined interactions of the block co-polymer and silica particles. A computer model is developed to elucidate the effects of size and distribution of the surface-decorating nanoparticles and their positional correlation.

Size-Controllable Prussian Blue Nanoparticles Using Pluronic Series for Improved Antioxidant Activity and Anti-Inflammatory Efficacy.

Prussian blue (PB) is a metal cluster nanoparticle (NP) of cyanide-bridged iron(II)-iron(III) and exhibits a characteristic blue color. Its peroxidase-, catalase-, and superoxide-dismutase-like activities effectively remove excess reactive oxygen species that induce inflammation and tumorigenesis. However, the dispersion of PB NPs is not sufficiently stable for their application in the biomedical field. In this study, we developed Pluronic-stabilized Prussian blue nanoparticles (PB/Plu NPs) using a series of Pluronic triblock copolymers as a template material for PB NPs. Considering the hydrophilic-lipophilic balance (HLB) values of the Pluronic series, including F68, F127, L35, P123, and L81, the diameters of the PB/Plu NPs decreased from 294 to 112 nm with decreasing HLB values. The smallest PB NP stabilized with Pluronic P123 (PB/PP123 NP) showed the strongest antioxidant and anti-inflammatory activities and wound-healing efficacy because of its large surface area. These results indicated that the spatial distribution of PB NPs in the micelles of Pluronic greatly improved the stability and reactive oxygen species scavenging activity of these NPs. Therefore, PB/Plu NPs using U.S.-FDA-approved Pluronic polymers show potential as biocompatible materials for various biomedical applications, including the treatment of inflammatory diseases in the clinic.

Construction of novel super microporous silica adsorbents using pluronic triblock copolymer as template towards desulfurization from fuel

As an efficient fuel purification technique, adsorption desulphurization has attracted wide attention. Silicon oxide has been verified as a promising candidate for adsorption desulfurization reagent due to the advantages of stable structure, inexpensiveness and accessibility. However, its adsorption desulfurization performance is always weakened by the limited pore channel size leading to pore diffusion resistance over the traditional microporous silicon oxide, and it suffers from the poor shape selectivity of mesoporous silicon oxide as well. In this work, we successfully prepared a novel super microporous silica material (SMS) with a unique bimodal micro-mesoporous pore size distribution mainly around 1.2 nm, 1.6 nm and 1.8 ∼ 3.5 nm, using a pluronic triblock copolymer with approximately an average molecular weight of 3858 as template by hydrothermal synthesis. The SMS possessed the characteristics of Ia3d cubic phase and super microporous as well as mesoporous silica structure, according to the X-ray diffraction characterization as well as nitrogen adsorption isotherms. The SMS could effectively reduce the diffusion resistance and exhibit improved shape selectivity compared to microporous or mesoporous silicon oxide, respectively, by virtue of its bimodal micro-mesoporous pore size distribution. Under an optimized crystallization temperature of 100 °C for 24 h, the as-synthesized SMS displayed a notable desulfurization performance with a breakthrough capacity of 0.122 mmol S/g benzothiophene, which was significantly superior to that of traditional mesoporous silica KIT-6 (0.04 mmol S/g). Furthermore, the desulfurization performance of SMS adsorbent was not significantly reduced after three cycles of regeneration. The SMS exhibited high desulfurization capacity, easy regeneration and satisfactory regeneration performance, and it could be applied in adsorptive desulfurization technology.

Conquering Cancer Multi-Drug Resistance Using Curcumin and Cisplatin Prodrug-Encapsulated Mesoporous Silica Nanoparticles for Synergistic Chemo- and Photodynamic Therapies.

Recently, the development of anti-cancer approaches using different physical or chemical pathways has shifted from monotherapy to synergistic therapy, which can enhance therapeutic effects. As a result, enormous efforts have been devoted to developing various delivery systems encapsulated with dual agents for synergistic effects and to combat cancer cells acquired drug resistance. In this study, we show how to make Institute of Bioengineering and Nanotechnology (IBN)-1-based mesoporous silica nanoparticles (MSNs) for multifunctional drug delivery to overcome drug resistance cancer therapy. Initially, curcumin (Cur)-embedded IBN-1 nanocomposites (IBN-1-Cur) are synthesized in a simple one-pot co-condensation and then immobilized with the prodrug of Cisplatin (CP) on the carboxylate-modified surface (IBN-1-Cur-CP) to achieve photodynamic therapy (PDT) and chemotherapy in one platform, respectively, in the fight against multidrug resistance (MDR) of MES-SA/DX5 cancer cells. The Pluronic F127 triblock copolymer, as the structure-directing agent, in nanoparticles acts as a p-glycoprotein (p-gp) inhibitor. These designed hybrid nanocomposites with excellent structural properties are efficiently internalized by the endocytosis and successfully deliver Cur and CP molecules into the cytosol. Furthermore, the presence of Cur photosensitizer in the nanochannels of MSNs resulted in increased levels of cellular reactive oxygen species (ROS) under light irradiation. Thus, IBN-1-Cur-CP showed excellent anti-cancer therapy in the face of MES-SA/DX5 resistance cancer cells, owing to the synergistic effects of chemo- and photodynamic treatment.

Unusual Self-Assembly of Amphiphilic Block Copolymer Blends Induced by Control of Hydrophobic Interaction.

Block copolymer blend systems have been of great interest for a wide range of potential applications, such as nanobuilding blocks or guidance materials, because they can provide a rich phase behavior according to external conditions. However, a new and unique phase behavior of block copolymers, which can give us their more extended potential applications, has not yet been reported. Herein, we report the unusual self-assembly of two different types of Pluronic P65 and PE6200 triblock copolymer blends dependent on temperature and PE6200 concentration, which is unique for the block copolymer blends in aqueous solution. As the temperature and concentration of PE6200 (as an additive) increased, the Pluronic P65/PE6200 copolymer blends sequentially self-assembled into an isotropic micellar-hexagonal-isotropic micellar or isotropic micellar-hexagonal-isotropic micellar-lamellar phase, which is a discontinuous ordered phase (called a closed looplike phase transition), and their phase transition temperature could be controlled. To the best of our knowledge, this is the first report of a closed looplike phase transition of Pluronic block copolymer blends in aqueous solution, which can be easily applied to nanosized templates for temperature-selective highly ordered structures and optical devices such as optoelectronics or optical sensors.

Zirconium Containing Periodic Mesoporous Organosilica: The Effect of Zr on CO2 Sorption at Ambient Conditions

Two series of zirconium-incorporated-periodic-mesoporous-organosilica (Zr–PMO) materials were successfully prepared, via a co-condensation strategy, in the presence of Pluronic P123 triblock copolymer. The first series of Zr–PMO was prepared using tris[3-(trimethoxysilyl)propyl]isocyanurate (ICS), tetraethylorthosilicate (TEOS), and zirconyl chloride octahydrate(ZrCO), denoted as Zr-I-PMO, where I refers to ICS. The second series was synthesized using bis(triethoxysilyl)benzene (BTEE), TEOS, and ZrCO as precursors, named as Zr-B-PMO, where B refers to BTEE. Zr–PMO samples exhibit type (IV) adsorption isotherms, with a distinct H2-hysteresis loop and well-developed structural parameters, such as pore volume, pore width, high surface area, and narrow pore-size distribution. Structural properties were studied by varying the Zr:Si ratio, adding TEOS at different time intervals, and changing the amount of block copolymer-Pluronic P123 used as well as the calcination temperature. Surface characteristics were tailored by precisely controlling the Zr:Si ratio, upon varying the amount of TEOS present in the mesostructures. The addition of TEOS at different synthesis stages, notably, enhanced the pore size and surface area of the resulting Zr-I-PMO samples more than the Zr-B-PMO samples. Changing the amount of block copolymer, also, played a significant role in altering the textural and morphological properties of the Zr-I-PMO and Zr-B-PMO samples. Optimizing the amount of Pluronic P123 added is crucial for tailoring the surface properties of Zr–PMOs. The prepared Zr–PMO samples were examined for use in CO2 sorption, at ambient temperature and pressure (25 °C, 1.2 bar pressure). Zr–PMO samples displayed a maximum CO2 uptake of 2.08 mmol/g, at 25 °C and 1.2 bar pressure. However, analogous zirconium samples, without any bridging groups, exhibited a significantly lower CO2 uptake, of 0.72 mmol/g, under the same conditions. The presence of isocyanurate- and benzene-bridging groups in Zr-I-PMO and Zr-B-PMO samples enhances the CO2 sorption. Interestingly, results illustrate that Zr–PMO materials show potential in capturing CO2, at ambient conditions.

Enhanced Catalytic Activity of a New Nanobiocatalytic System Formed by the Adsorption of Cytochrome c on Pluronic Triblock Copolymer Stabilized MoS2 Nanosheets.

The formation of nanobiohybrids through the immobilization of enzymes on functional nanomaterials has opened up exciting research opportunities at the nanobiointerfaces. These systems hold great promise for a wide range of applications in biosensing, biocatalytic, and biomedical fields. Here, we report the formation of a hybrid nanobiocatalytic system through the adsorption of cytochrome c (Cyt c) on pluronic triblock copolymer, P123 (PEO-b-PPO-b-PEO), stabilized MoS2 nanosheets. The use of pluronic polymer has helped not only to greatly stabilize the exfoliated MoS2 nanosheets but also to allow easy adsorption of Cyt c on the nanosheets without major structural changes due to its excellent biocompatibility and soft protein-binding property. By comparing the catalytic activity of the Cyt c–MoS2 nanobiohybrid with that of the free Cyt c and as-prepared MoS2 nanosheets, we have demonstrated the active role of the nanobiointeractions in enhancing the catalytic activity of the hybrid. Slight structural perturbation at the active site of the Cyt c upon adsorption on MoS2 has primarily facilitated the peroxidase activity of the Cyt c. As the MoS2 nanosheets and the native Cyt c individually exhibit weaker intrinsic peroxidase activities, their mutual modulation at the nanobiointerface has made the Cyt c–MoS2 a novel nanobiocatalyst with superior activity.

Pick up and dispose of pollutants from water via temperature-responsive micellar copolymers on magnetite nanorobots

Nano/micromotor technology is evolving as an effective method for water treatment applications in comparison to existing static mechanisms. The dynamic nature of the nano/micromotor particles enable faster mass transport and a uniform mixing ensuring an improved pollutant degradation and removal. Here we develop thermosensitive magnetic nanorobots (TM nanorobots) consisting of a pluronic tri-block copolymer (PTBC) that functions as hands for pollutant removal. These TM nanorobots are incorporated with iron oxide (Fe3O4) nanoparticles as an active material to enable magnetic propulsion. The pickup and disposal of toxic pollutants are monitored by intermicellar agglomeration and separation of PTBC at different temperatures. The as-prepared TM nanorobots show excellent arsenic and atrazine removal efficiency. Furthermore, the adsorbed toxic contaminants on the TM nanorobots can be disposed by a simple cooling process and exhibit good recovery retention after multiple reuse cycles. This combination of temperature sensitive aggregation/separation coupled with magnetic propulsion opens a plethora of opportunities in the applicability of nanorobots in water treatment and targeted pollutant removal approaches.

Ultrasonic Synthesis of Al‐SBA‐15 Nanoporous Catalyst for t-Butylation of Ethylbenzene

Mesoporous Al‐SBA‐15 (Si/Al = 25) catalysts were synthesised by the ultrasonic (US) irradiation method at different time durations (1, 3, and 5 h) using the pluronic P123 triblock copolymer as a template. The synthesised catalysts were examined in detail by XRD, ICP‐AES, N2 adsorption‐desorption, SEM, TEM, FT‐IR, and TGA characterization techniques. The characterization results reveal that the catalysts possess a well‐ordered hexagonal mesoporous structure. The catalytic activity of synthesised materials was investigated in the tert-butylation of ethylbenzene at different reaction conditions, and their identified products are para-tert‐butylethylbenzene (p-tert‐BEB) and meta-tert‐butylethylbenzene (m-tert‐BEB). It was found that high ethylbenzene conversion (69%) is achieved at 200°C with high selectivity towards p-tert‐butylethylbenzene (80%). The optimum feed ratio (ethylbenzene: t‐butyl alcohol) was 1 : 2, and the feed rate was 2 ml/h for high conversion and product selectivity. All these synthesised Al‐SBA‐15 (US) catalysts are compared with hydrothermally synthesised Al‐SBA‐15 (HT) at the same reaction conditions.

Synthesis of spherical SBA-15 by poly (vinyl alcohol)/ Hydroxyl-terminated polybutadiene supermicelles as co-surfactant and its application for removal of diazinon from aqueous solution

A low-cost and facile strategy was successfully developed to produce spherical micrometer-sized SBA-15 with cylindrical pores arranged in a hexagonal order using pluronic triblock-copolymer P123 as template and poly (vinyl alcohol) (PVA)/hydroxyl-terminated polybutadiene (HTPB) supermicelles as co-surfactant. Herein, a solvent evaporation induced aggregating assembly (EIAA) method was reported for the preparation of SBA-15 microspheres. The materials were characterized by Scanning electron microscopy (SEM), High resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and Brunauer–Emmet–Teller (BET) method. The diazinon adsorption properties of spherical SBA-15 were studied to find out the effect of various experimental factors. Results exhibited that the highest diazinon removal efficiency (95.2%) was achieved at pH 6, initial concentration of 50 mg L −1 , temperature of 318 K, and the adsorbent dosage of 0.1 g L −1 for 60 min. The adsorption behavior of diazinon was described by the Langmuir isotherm and pseudo-second-order model (R 2 > 0.99). Maximum adsorption capacity obtained 526.3 mg g −1 . The apparent activation energy for spherical SBA-15 was 16.69 kJ mol −1 . Thermodynamic studies illustrated that the adsorption process was exothermic with spontaneous nature. The efficiency of diazinon removal was not considerably affected by the presence of the lindane. Moreover, the spherical SBA-15 retained its adsorbing properties after sixteen cycles. • Spheres obtained using P123–PVA/HTPB as a template in the THF/H 2 O/ethanol mixture. • Spherical SBA-15 adsorbent was highly effective to diazinon removal. • The adsorption process was described by the Langmuir isotherm. • The pseudo-second-order model is the best to adsorption kinetic.

Thermoresponsive and Injectable Composite Hydrogels of Cellulose Nanocrystals and Pluronic F127.

Thermoresponsive amphiphilic Pluronic F127 triblock copolymer solutions have been widely investigated in smart biomaterial applications due to the proximity of its critical gel temperature to human body temperature. Meanwhile, cellulose nanocrystals (CNCs) have quickly become the focus of many drug delivery and tissue engineering applications due to their biocompatibility, abundance, ability to conjugate with drug molecules, and superior rheological properties. Herein, we investigate the phase behavior and thermo-rheological properties of the composite hydrogels containing cellulose nanocrystals (up to 5% by weight) and the temperature responsive Pluronic F127. Our results revealed an unprecedented role of CNC network formation on micellization and gelation behavior of the triblock copolymer. Linear and nonlinear rheological analysis suggest that at low and moderate nanocrystal loadings (1-3% by weight), the composite gel remarkably becomes softer and deformable compared to the neat Pluronic F127 gels. The softening effect results from the disruption of the close packed micelles by the rodlike CNCs. At high concentrations, however, the nanocrystals form their own network and the micelles are trapped within the CNC meshes. As a result, the original (neat F127) hard-gel modulus is recovered at 4 to 5% nanocrystal loading, yet the composite gel is much more deformable (and tougher) in the presence of the CNC network. Our temperature sweep experiments show that the CNC addition up to 3% does not change the rapid thermal gelation of the F127 solutions; therefore, these composites are suitable for smart drug delivery systems. On the other hand, at higher CNC concentrations, abrupt viscosity transition is not observed, rather the composite gels smoothly thicken with temperature in contrast to thermal thinning of the aqueous neat CNC. Thus, they can be used as smartly adaptive biolubricants and bioviscostatic materials.

Green separation of lanthanum, cerium and nickel from waste nickel metal hydride battery

In a circular economy context, there is a growing need for more sustainable waste management options to recover elements from end-of-life materials. These “secondary ores” represent a source of critical elements that are often present in higher concentration compared to their primary ore. In this work, the recovery of lanthanum (La) from waste nickel metal hydride battery (NiMH) leachate is investigated using an aqueous biphasic system (ABS) process based on a pluronic triblock copolymer (L35). An initial screening is performed to determine the influence of the ABS phase forming salt anion and alizarin red extractant on the La extraction efficiency and selectivity. From these results, a three-step ABS process is developed, varying only the nature of the salt and requiring no additional extractant. In a first step, the ABS composed of L35 + thiocyanate ammoniun + H2O efficiently extracts iron, manganese, and cobalt leaving La, cerium, and Ni in solution. Nickel is subsequently recovered by precipitation using dimethylglyoxime. Finally, La is separated from cerium using the L35 + ammonium nitrate + H2O ABS, recovering 62 g of La with 94% purity per kilogram of black mass of NiMH battery. This work highlights the applicability of ABS for the treatment of raw and complex matrices, potentially allowing for a greener hydrometallurgical treatment of wastes.

Nanoencapsulation of Chromolaena odorata Extract Using Pluronic F127 as an Effectively Herbal Delivery System for Wound Healing

Chromolaena odorata is a medicinal herb with prominent pharmacological properties. The therapeutic efficiency of Chromolaena odorata extracts and its ingredients have, however, been limited by various factors, including the lack of targeting capacity and poor bioavailability. To approach this drawback, ethyl acetate fraction extract of Chromolaena odorata- (EA.ChO-) encapsulated pluronic-based nanocarriers was disclosed herein. The most common pluronic triblock copolymer micelles (pluronic F127) was used for the nanosized formulation of Chromolaena odorata extract. The obtained results show that EA.ChO-encapsulated nanoparticles have a spherical morphology with a designed hydrodynamic size was about 183.7 nm and zeta potential -39.5 mV. The EA.ChO nanoparticles are stable in different aqueous solutions (water, PBS 2.8, and PBS 7.4). The lyophilized form of the EA.ChO nanoparticles exhibited excellent stability for long-term storage. Notably, the EA.ChO nanoparticles were 1.3-1.4 fold more effective in the growth of fibroblast than the free EA.ChO, verifying the potential of pluronic F127 nanoparticles to the increased function of EA.ChO in the proliferation of fibroblast cell. In addition, bleeding stopped within 55 ± 6 s which was 20 s faster than that of free EA.ChO and 38-44 s faster than that of negative control treatments. The EA.ChO nanoencapsulation processed a rapid blood clot formation compared to control, free EA.ChO, pluronic F127, and water, suggesting the excellent bioavailability of EA.ChO nanoencapsulation. The obtained results thus provided a promising prospect for raising the activity Chromolaena odorata extract in wound healing application.

A Novel TEPA-Load or PEI-Load Beta/KIT-6 Composite and their Application to CO2 Adsorption

An amine-modified Beta/KIT-6 (BK) micro/mesoporous composite for CO2 capture was synthesized using nonionic tri-block copolymer pluronic (P123) as a template, tetraethyl orthosilicate (TEOS) as a silicon source and Beta zeolite as part of silicon aluminum source by a two-step hydrothermal crystallization method. BK was modified by Tetraethylenepentamine (TEPA) or polyethyleneimine (PEI) to obtain solid amine adsorbent. The structure, uniformity and physical properties of the sample were characterized by FTIR, nitrogen adsorption/desorption and elemental analysis methods and CO2 adsorption/desorption behavior of adsorbents and regeneration performance were investigated by thermal gravimetric analysis (TGA). Experimental results showed that with the increase of amine loading the CO2 adsorption capacity of samples increased first and then decreased at [Formula: see text]C, TEPA-loaded BK and PEI-loaded BK both presented the largest saturated CO2 adsorption capacity when the amine loading reached 60%, and the maximum values were 4.21[Formula: see text]mmol[Formula: see text]g[Formula: see text] and 2.72[Formula: see text]mmol[Formula: see text]g[Formula: see text], respectively. BK-TEPA-60 and BK-PEI-60 reached the maximum adsorption capacity at [Formula: see text]C and [Formula: see text]C. The adsorption kinetics analysis showed that the adsorption process of amine-modified BK was dominated by both physical and chemical adsorption. After five cycles of adsorption/desorption, BK-PEI-60 kept better stability with the equilibrium adsorption capacity of exhibited just 2.9% attrition, whereas a 9.2% decrease was obtained for BK-TEPA-60. Compared with other amine-modified solid materials, the materials we designed show good CO2 adsorption performance, indicating that they are promising efficient adsorbents for CO2 capture.