Plating Of Proximal Humerus Fractures Research Articles

Quantifying Distal Deltoid Disruption With Linear versus Curvilinear Plating of Proximal Humerus Fractures: A Cadaveric Study

BACKGROUND: Plate fixation of proximal humeral fractures is usually associated with some degree of distal deltoid dissection. The purpose of this study was to quantify deltoid release with standard linear versus curvilinear plates used in the repair of proximal humeral fractures. METHODS: Seven nonpaired, fresh-frozen, clavicle-to-fingertip cadaveric shoulders met the inclusion criteria for this study. Four different proximal humerus implants were tested. One of these plates was curvilinear (89 mm), and the other 3 plates were linear (85, 98, 109 mm in length). Plates were compared based on the amount of deltoid insertion released for proper plate positioning. An analysis of variance with post hoc Tukey tests was conducted to compare mean deltoid disruption across the 3 shortest plate types from each manufacturer. A linear regression analysis was conducted to analyze the effect of plate length on mean deltoid release. RESULTS: The mean deltoid insertion length was 39.6 ± 8.6 mm (n = 7). The curvilinear plate (89 mm) required the least amount of average deltoid release at 4.1 ± 4.5 mm, or 12.1% of the deltoid insertion. Independent analysis of variance, including the 3 shortest plates from each manufacturer, found a significant effect of which plate was used on the amount of deltoid disruption that resulted (F(2, 18) = 18.0, P < 0.001, ω = 0.6). A linear regression including all 4 plates demonstrated a statistically significant direct relationship between the plate length and the mean deltoid released (y = 0.6x − 43.8, r2 = 4). CONCLUSION: This study demonstrates that proximal humerus plate length has a direct relationship with the amount of deltoid released during plating. Although deltoid disruption is length dependent, plate shape (curvilinear vs. linear) could also be contributory. When comparing a curvilinear and a linear plate of similar lengths, the curvilinear plate resulted in less mean deltoid release.

Biomechanical Analysis of Combined Medial Calcar and Lateral Locked Plating Versus Isolated Lateral Locked Plating of Proximal Humerus Fractures.

Medial calcar buttress plating combined with lateral locked plating is biomechanically tested against isolated lateral locked plating in synthetic humeri models for the treatment of proximal humerus fractures. Proximal humerus fractures (OTA/AO type 11-A2.1) were manufactured in 10 pairs of Sawbones humeri models (Sawbones, Pacific Research Laboratories, Vashon Island, WA). Specimen were randomly assigned and instrumented with either medial calcar buttress plating combined with lateral locked plating (CP) or isolated lateral locked plating (LP). Nondestructive torsional and axial load tests were performed to evaluate construct stiffness. Large-cycle axial tests were conducted followed by destructive ramp-to-failure tests. Cyclic stiffness was compared in both nondestructive and ultimate failure loads. Failure displacement was recorded and compared between groups. The addition of medial calcar buttress plating to lateral locked plating constructs significantly increased the axial ( P < 0.01) and torsional ( P < 0.01) stiffness of the construct compared with isolated lateral locked plating by 95.56% and 37.46%, respectively. All models demonstrated greater axial stiffness ( P < 0.01) after 5000 cycles of axial compression, not dependent on the fixation method. During destructive testing, the CP construct withstood 45.35% larger load ( P < 0.01) and congruently exhibited 58% less humeral head displacement ( P = 0.02) before failure when compared with the LP construct. This study demonstrates the biomechanical superiority of medial calcar buttress plating when combined with lateral locked plating as compared with isolated lateral locked plating of OTA/AO type 11-A2.1 proximal humerus in synthetic humeri models.

Intrinsic Cortical Property Analysis of the Medial Column of Proximal Humerus.

Adequate mechanical support of the medial column is paramount to maintain fracture reduction in locking plating of proximal humerus fractures. However, intrinsic cortical properties of the medial column are rarely discussed. The purpose of the study is to describe regional variation of cortex in the medial column. A total of 147 healthy participants were eligible for enrollment between December 2016 and December 2018. Subjects were divided into three groups: group A (20-39 years), group B (40-59 years), and group C (>60 years). For each individual, a color 3D thickness map for proximal humerus was created by cortical bone mapping (CBM) technique after bilateral shoulders were imaged by computed tomography. Measurement Indices including the cortical thickness (CTh), cortical mass surface density (CM) and the endocortical trabecular density (ECTD) were determined, after six regions of interest (ROI) were defined in metaphyseal region. Regional parameter variations were analyzed by one-way ANOVA. The CTh, CM and ECTD values were approximately equivalent between genders in the proximal part of the medial column across all ages (P> 0.05).The greatest difference between sexes was found in CTh and CM values of middle and distal part (P< 0.05). The CTh and CM within medial column were negatively associated with age (P< 0.05). The proximal cortical bone of the medial column was thicker and more dense, compared to the lateral column (P< 0.05). Significant regional variation was found in all measured parameters in group A, but not in groups B and C. Our finding proved that regional differences in the distribution of cortical bone in the medial column The attenuation of cortical bone heterogeneity in the medial column was found after the age of 40 years.

Clinical and Radiological Outcome of Dual Plating for Proximal Humerus Fractures.

Introduction Proximal humerus fractures account for approximately 4%-5% of all fractures. It accounts for approximately 45% of all humeral fractures. Proximal humerus fractures which are mostly stable or minimally displaced fractures are usually managed non-operatively with good outcomes. Displaced or unstable fractures may require reduction and stabilization. For proximal humerus fractures, conservative treatments often result in stiffness and malunion of the shoulder. In comminuted proximal humerus fracturesthe use of a proximal humeral internal locking system (PHILOS) only does not provide the required stable fixation which usually leads to complications such as varus collapse,malunion, anterior-posterior angulation, screw cutout, metal failure and nonunionand thusopen reduction and internal fixation with dual plating are recommended for proximal humerus fractures. Material and methods The Institutional Ethics Committee of Dr. D. Y. Patil Vidyapeeth in Pune approved this prospective study. We included a sample size of 52 patients and conducted a study on these patients who were admitted under the Orthopedics department at Dr. D. Y. Patil Medical College and Hospital, Pune. Results In this study, 52 patients were treated with dual plating for proximal humerus fracture, an additional plate is used along with PHILOS. In our study, the majority of the study population belonged to > 50 years (34.6%), followed by 41-50 years (26.9%), 31-40 years (23.1%), and 21-30 years (15.4%). The mean age of the patient was 53.7 years including 33 male and 19 female patients. The majority of the patient in the study included was with RTA 40 patients and 12 patients with a history of falls from height. The fracture was classified using Neers classification, Neer type 2 fracture (23.1%), Neer type 3 fracture (46.2%), and Neer type 4 fracture (30.7%). In the current study, the mean DASH score at Baseline was 58.88±6.29, at three months was 36.23±5.05 and at six months was 31.85±4.16. The mean DASH score decreased significantly from baseline to three months to 6 months. As per the Paavolainen method, it was good among 40 (76.9%) and fair among 10 (19.2%), and poor among two (3.8%) cases. Out of 52 patients, we found varus collapse in immediate postop x-ray in two patient and screw protrusion in the glenohumeral joint in one patient. Conclusion Satisfactory clinical and radiological outcomes were noted. This dual mechanism prevents varus displacement of the proximal fragment, and as a result, it provides a good functional outcome with dual plates in proximal humerus fractures.

Preventing varus collapse in proximal humerus fracture fixation: 90-90 dual plating versus endosteal fibular allograft strut.

Screw cut out and varus collapse arethe most common complication of locked plate fixation of proximal humerus fractures. The purpose of this study was to compare dual plating and endosteal fibular allograft struts as augmentation strategies to prevent varus collapse. A trapezoidal osteotomy was created at the metaphysis to create a 2-part proximal humerus model in 18 paired shoulder specimens. Each specimen was assigned to group A, B, or C and was fixed with either a lateral locking plate, a lateral locking plate and anterior one-third tubular plate in an orthogonal 90/90 configuration, or a lateral locking plate with intramedullary fibular strut, respectively. The specimens were stressed in axial compression to failure. Displacement, elastic limit, ultimate load, and stiffness were recorded and calculated. There was no difference in mean cyclic displacement between the three groups (0.71mm vs 0.89mm vs 0.61mm for Group A, B, C, respectively). Lateral plating demonstrated the greatest absolute and relative displacement at the elastic limit (5.3mm ± 1.5 and 4.4mm ± 1.3) without significance. The elastic limit or yield point was greatest for fibular allograft, Group C (1223N ± 501 vs 1048N ± 367 for Group B and 951N ± 249 for Group A) without significance. Dual plating of proximal humerus fractures in a 90-90 configuration demonstrates similar biomechanical properties as endosteal fibular strut allograft. Both strategies demonstrate superior stiffness to isolated lateral locked plating.

Complications of Locked Plating for Proximal Humeral Fractures in Active Patients in a Level One Trauma Center.

The incidence of complications associated with locked plating of proximal humerus fractures (PHF) has been reported in up to 40% of surgeries. This study aimed to analyze the incidence and risk factors of complications and re-intervention associated with locked plating of PHF in a an young active working population. This retrospective cohort study included patients indicated for locked plating of displaced PHF at a dedicated workers' accident trauma center. The variables analyzed were patient comorbidities, fracture characteristics, and immediate radiologic surgical outcomes. Postoperative complications and risk factors were determined. A total of 127 patients with a median follow-up of 31 months and a median age of 52 years were included. The complication and reintervention rates were 13.4% and 12.6%, respectively. The main cause of reintervention was post-traumatic stiffness. The incidence of other complications was 4% screw protrusion, 1.6% avascular necrosis, 1.6% varus collapse. Complications were not associated with age, comorbidity, fracture classification, bone mineral density, Hertel's risk factors, presence of calcar comminution, reduction quality, and calcar screw position. The incidence of complications and reintervention was low. The main cause of reintervention was persistent stiffness, and no risk factors for complications were found in this study.

PHILOS Synthesis for Proximal Humerus Fractures Has High Complications and Reintervention Rates: A Systematic Review and Meta-Analysis.

Purpose: The aim of this study was to quantify the rate of complications and reinterventions in patients treated with PHILOS plate for proximal humerus fractures (PHFs) synthesis. Methods: A comprehensive literature search was performed on the PubMed, Web of Science, Embase, and Cochrane databases up to 7 October 2021. Studies describing medium and long-term complications in PHF synthesis using the PHILOS plate were included. A systematic review and meta-analysis were performed on complications and causes of reinterventions. Assessment of risk of bias and quality of evidence was performed with the Downs and Black’s “Checklist for Measuring Quality”. Results: Seventy-six studies including 4200 patients met the inclusion criteria. The complication rate was 23.8%, and the main cause was screw cut-out (4.1%), followed by avascular necrosis (AVN) (3.1%) and subacromial impingement (1.5%). In patients over 55 years, the complication rate was 29.5%. In the deltopectoral (DP) approach the complication rate was 23.8%, and in the delto-split (DS) it was 17.5%, but no difference between the two approaches was seen when considering the type of fracture. The overall reintervention rate was 10.5% in the overall population and 19.0% in older patients. Conclusions: Proximal humerus synthesis with a PHILOS plate has high complications and reintervention rates. The most frequent complication was screw cut-out, followed by humeral head AVN and subacromial impingement. These results need to be further investigated to better understand both the type of patient and fracture that is more at risk of complications and reintervention and to compare pros and cons of the PHILOS plate with respect to the other solutions to manage PHFs.

Avoiding Complications of Locking Plating for Proximal Humerus Fractures.

Proximal humeral fractures are very common, especially among elderly people with osteoporosis. The treatment methods are numerous, according to the characteristics of the patient and the fracture, as well as the surgeon's preference. These fractures can be treated either conservatively or operatively with closed or open reduction and internal fixation, or arthroplasty. During the past decades, with the advances in osteosynthesis and the establishment of locking plates, many surgeons prefer managing humeral fractures with open reduction and internal fixation with locking plates. Even though this is a widespread method of treatment, many studies report high complication rates, including perioperative and hardware complications. This article presents the most common complications a surgeon may face when managing this kind of fractures, as well as intraoperative techniques that can be used to avoid them.

Shoulder function after helical long PHILOS plate.

In order to minimize the risk of damaging the radial nerve while using a long PHILOS plate for proximal humerus fractures, recent studies have proposed twisting the plate in a helical form. This implies a modified surgical approach being yet unclear whether it leads to different middle to long-term shoulder function. This study compares the one-year shoulder functional outcomes of both techniques (helical vs. control). In this retrospective comparative study, we analyzed 30 patients that fit the inclusion criteria, being 14 treated with a helical plate and 16 with a conventional straight long PHILOS plate. The primary endpoint was the normalized constant score after a minimum follow up of one year. Both groups had a good one-year shoulder function, and no significant difference between the normalized constant scores was seen. There was no significant difference in the surgical complications as well. Opting for a helical long PHILOS plate in order to avoid radial nerve damage provided a safe treatment with similarly good one-year shoulder function compared to straight PHILOS plates. Level 3, Retrospective Cohort Study.

Principles of Locking Plate Fixation of Proximal Humerus Fractures.

Proximal humerus fractures are common, particularly in elderly patients and those with osteopenia or osteoporosis. Although nonsurgical management results in satisfactory outcomes for most patients, surgical treatment is indicated in select cases. Despite an increasing trend toward arthroplasty, open reduction and internal fixation of proximal humerus fractures can still provide excellent clinical outcomes. Proper technique for internal fixation of the proximal humerus requires an understanding of osseous and neurovascular anatomy. In particular, understanding reliable regions of biomechanically superior bone can help prevent failure of fixation. Biomechanical studies have shown that locked plating of proximal humerus fractures provides stable fixation. Cadaveric and finite element models underscore the importance of screw placement in the posteromedial metaphysis. When medial column support is challenging to obtain, or when bone quality is poor, augmentation with bone autograft, allograft, and/or synthetic composites can improve the biomechanics of internal fixation constructs. The purpose of this review is to outline the anatomic, biologic, and biomechanical principles of plate fixation for proximal humerus fractures to provide evidence-based recommendations for optimizing fixation and preventing fixation failure.

Overdrilling increases the risk of screw perforation in locked plating of complex proximal humeral fractures – A biomechanical cadaveric study

Locked plating of proximal humerus fractures (PHF) is associated with high failure rates (15–37%). Secondary screw perforation is a prominent mode of failure for PHF and typically requires reoperation. The anatomical fracture reduction is an essential factor to prevent fixation failure. However, recent studies indicate that the risk of secondary screw perforation may increase if the articular surface is perforated during predrilling of the screw boreholes (overdrilling). This study aimed to determine whether overdrilling increases the risk of secondary screw perforation in unstable PHF.Nine pairs of human cadaveric proximal humeri were osteotomized to simulate a malreduced and highly unstable 3-part fracture (AO/OTA 11 B1.1), followed by their assignment to two study groups for overdrilling or accurate predrilling in paired design, and fixation with a locking plate. Overdrilling was defined by drilling the calcar screw’s boreholes through the articular surface. All humeri were cyclically loaded to screw perforation failure. Number of cycles to initial screw loosening and final perforation failure were analysed.The accurately predrilled group revealed a significantly higher number of cycles to both initial screw loosening (p < 0.01) and final screw perforation failure (p = 0.02), compared to the overdrilled one.This is the first study reporting that drilling to the correct depth significantly increases endurance until screw perforation failure during cyclic loading after locked plating in a highly unstable PHF model. Prevention of overdrilling the boreholes could help reduce failure rates of locked plating. Future work should investigate the prevalence and consequences of overdrilling in clinics.

Medial support is the critical risk factor for preventing failure after plating of proximal humerus fractures

Medial support is the critical risk factor for preventing failure after plating of proximal humerus fractures

Does cement augmentation of the screws in angular stable plating for proximal humerus fractures influence the radiological outcome: a retrospective assessment

BackgroundScrew-tip augmentation in angular stable plating offers new possibilities for the treatment of complex proximal humerus fractures. This retrospective analysis was performed to evaluate the radiological outcome of proximal humerus fractures treated with angular stable plates and additional screw-tip cement augmentation in patients over the age of 60.Materials and methodsA retrospective single centre analysis was conducted from June 2013 to December 2016. The minimum follow-up time was set to 6 months after surgery. Anatomical reduction and fixation were evaluated in respect to reattached tuberosities to the head fragment and the adequate restoration of the calcar area not showing any valgus or varus malalignment. Complete fracture healing was determined 3 months after surgery. Any failures such as secondary displacement, primary screw perforation, intraarticular cement leakage and avascular necrosis of the humeral head with concomitant screw cut-out were assessed.ResultsIn total, 24 patients (21 females; 3 males) at a median age of 77.5 (62–96) years were included. Five 2-part, twelve 3-part and seven 4-part fractures were detected. The measured median BMD value of 23 patients was 78.4 mg/cm3 (38.8–136.9 mg/cm3). Anatomical reduction was achieved in 50% of the patients. In most cases, the A level screws and the B1 screw were augmented with bone cement by a median of 7 (5–9) head screws used. Postoperative varus displacement was not detected in any of the patients. One patient (4.2%) sustained an early secondary displacement. Intraarticular cement leakage was detected in 3 patients (2 head-split fractures). Avascular necrosis of the humeral head was observed in 4 patients (16.7%). Revision surgery was necessary in four cases, using hemiarthroplasty twice and reverse shoulder arthroplasty the other two times.ConclusionScrew-tip augmentation in angular stable plating for proximal humerus fracture treatment showed a low secondary displacement rate of 4.2% in patients suffering from poor bone quality. Nevertheless, the occurrence of avascular necrosis of the humeral head with mainly severe fracture patterns observed in this study was higher compared to previously reported results in the literature. Cement augmentation in head-split fractures is not recommended, considering the high risk of an intraarticular cement leakage.

Effects of medial support screws on locking plating of proximal humerus fractures in elderly patients: a retrospective study.

This study aimed to explore the effects of medial support screws (MSS) on the locking proximal humeral plate in elderly patients who suffered from proximal humeral fractures. From December 2016 to December 2018, eighty-five elderly patients who suffered from proximal humeral fracture and received standard plate or locking plate with or without MSS were selected. The patients were allocated into 3 groups: Standard plate group (n=23), Locking plate without MSS group (n=34) and Locking plate with MSS group (n=28). Clinical data from all these 3 groups were collected and analyzed. These eighty-five elder patients (ranging 60-78 years) accomplished a follow-up with an average of 16.3 months. The outcome data showed that significant difference was found on the Constant score, humeral internal rotation angle and humeral height ratio (all the P<0.05) among 3 groups, and a highest Constant score and a lowest humeral internal rotation angle and humeral height ratio loss was revealed in Locking platelet with MSS group. Furthermore, the lowest incidence of post-operation complication events (7.1%, P=0.051) and an evident reduction of secondary surgery incidence (P=0.021) was also presented in Locking plate with MSS among these 3 groups. The medial support screws in the locking proximal humeral plate in treating proximal humeral fractures could reduce humerus restoration loss and humeral internal rotation angle.

Secondary Perforation Risk in Plate Osteosynthesis of Unstable Proximal Humerus Fractures: A Biomechanical Investigation of the Effect of Screw Length

Secondary perforation of screws into the joint surface is a commonly reported mechanical fixation failure mode in locked plating of proximal humerus fractures (PHF). This study investigated the influence that screws tip to joint distance (TJD) has on the biomechanical risk of secondary screw perforation and the stability of PHF. Ten pairs of cadaveric proximal humeri with a wide range of bone mineral density were used. Each specimen was osteotomized and instrumented with the PHILOS plate, simulating a highly unstable 3-part fracture. Bones were randomized into a long screw group (LSG) with 4 mm TJD, or a short screw group (SSG) with 8 mm TJD. A custom biomechanical setup was used to test the samples to failure cyclically with a constant valley load and an increasing ramp. The number of cycles to the initial screw loosening event was significantly higher for the LSG (mean ± standard deviation: 17,532 ± 6,458) compared with the SSG (11,102 ± 5,440) (p < 0.01). The mode of failure during testing was lateral-inferior displacement combined with varus collapse, with calcar screws perforating first. The number of cycles to failure event for LSG (27,849 ± 5,648) was not significantly different compared with SSG (28,782 ± 7,307) (p = 0.50). Screws that purchase closer to the joint had better initial stability and resistance against loosening. Placing longer screws, within limits dictated by the surgical guide, is expected to decrease the risk of secondary perforation failures in unstable PHF. These findings require clinical corroboration. © 2019 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 37:2625-2633, 2019.

Long-term follow-up after MIPO Philos plating for proximal humerus fractures.

Minimally invasive plate osteosynthesis (MIPO) has been described as a suitable technique for the treatment of proximal humerus fractures, but long-term functional results have never been reported. The aim of this study was to describe the long-term functional outcome and implant-related irritation after MIPO for proximal humerus fractures. A long-term prospective cohort analysis was performed on all patients treated for a proximal humerus fracture using MIPO with a Philos plate (Synthes, Switzerland) between December 2007 and October 2010. The primary outcome was the QuickDASH score. Secondary outcome measures were the subjective shoulder value (SSV), implant related irritation and implant removal. Seventy-nine out of 97 patients (81%) with a mean age of 59years were available for follow-up. The mean follow-up was 8.3years (SD 0.8). The mean QuickDASH score was 5.6 (SD 14). The mean SSV was 92 (SD 11). Forty out of 79 patients (50.6%) had implant removal, and of those, 27/40 (67.5%) were due to implant-related irritation. On average, the implant was removed after 1.2years (SD 0.5). In bivariate analysis, there was an association between the AO classification and the QuickDASH (p = 0.008). Treatment of proximal humerus fractures using MIPO with Philos through a deltoid split approach showed promising results. A good function can be assumed due to the excellent scores of patient oriented questionnaires. However, about one-third of the patients will have a second operation for implant removal due to implant-related irritation.

Influence of Medial Support Screws on the Maintenance of Fracture Reduction after Locked Plating of Proximal Humerus Fractures.

Background:Technical aspects of the correct placement of medial support locking screws in the locking plate for proximal humerus fractures remain incompletely understood. This study was to evaluate the clinical relationship between the number of medial support screws and the maintenance of fracture reduction after locked plating of proximal humerus fractures.Methods:We retrospectively evaluated 181 patients who had been surgically treated for proximal humeral fractures (PHFs) with a locking plate between September 2007 and June 2013. All cases were then subdivided into one of four groups as follows: 75 patients in the medial cortical support (MCS) group, 26 patients in the medial multiscrew support (MMSS) group, 29 patients in the medial single screw support (MSSS) group, and 51 patients in the no medial support (NMS) group. Clinical and radiographic evaluations included the Constant-Murley score (CM), visual analogue scale (VAS), complications, and revision surgeries. The neck-shaft angle (NSA) was measured in a true anteroposterior radiograph immediately postoperation and at final follow-up. One-way analysis of variance or Kruskal-Wallis test was used for statistical analysis of measurement data, and Chi-square test or Fisher's exact test was used for categorical data.Results:The mean postoperative NSAs were 133.46° ± 6.01°, 132.39° ± 7.77°, 135.17° ± 10.15°, and 132.41° ± 7.16° in the MCS, MMSS, MSSS, and NMS groups, respectively, and no significant differences were found (F = 1.02, P = 0.387). In the final follow-up, the NSAs were 132.79° ± 6.02°, 130.19° ± 9.25°, 131.28° ± 12.85°, and 127.35° ± 8.50° in the MCS, MMSS, MSSS, and NMS groups, respectively (F = 4.40, P = 0.008). There were marked differences in the NSA at the final follow-up between the MCS and NMS groups (P = 0.004). The median (interquartile range [IQR]) NSA losses were 0.0° (0.0–1.0)°, 1.3° (0.0–3.1)°, 1.5° (1.0–5.2)°, and 4.0° (1.2–7.1)° in the MCS, MMSS, MSSS, and NMS groups, respectively (H = 60.66, P < 0.001). There were marked differences in NSA loss between the MCS and the other three groups (MCS vs. MMSS, Z = 3.16, P = 0.002; MCS vs. MSSS, Z = 4.78, P < 0.001; and MCS vs. NMS, Z = 7.34, P < 0.001). There was also significantly less NSA loss observed in the MMSS group compared to the NMS group (Z = −3.16, P = 0.002). However, there were no significant differences between the MMSS and MSSS groups (Z = −1.65, P = 0.225) or the MSSS and NMS groups (Z = −1.21, P = 0.099). The average CM scores were 81.35 ± 9.79, 78.04 ± 8.97, 72.76 ± 10.98, and 67.33 ± 12.31 points in the MCS, MMSS, MSSS, and NMS groups, respectively (F = 18.68, P < 0.001). The rates of excellent and good CM scores were 86.67%, 80.77%, 65.52%, and 43.14% in the MCS, MMSS, MSSS, and NMS groups, respectively (χ2= 29.25, P < 0.001). The median (IQR) VAS scores were 1 (0–2), 1 (0–2), 2 (1–3), and 3 (1–5) points in the MCS, MMSS, MSSS, and NMS groups, respectively (H = 27.80, P < 0.001). Functional recovery was markedly better and VAS values were lower in the MCS and MMSS groups (for CM scores: MCS vs. MSSS, P < 0.001; MCS vs. NMS, P < 0.001; MMSS vs. MSSS, P = 0.031; and MMSS vs. NMS, P < 0.001 and for VAS values: MCS vs. MSSS, Z = 3.31, P = 0.001; MCS vs. NMS, Z = 4.64, P < 0.001; MMSS vs. MSSS, Z = −2.09, P = 0.037; and MMSS vs. NMS, Z = −3.16, P = 0.003).Conclusions:Medial support screws might help enhance mechanical stability and maintain fracture reduction when used to treat PHFs with medial metaphyseal comminution or malreduction.

A comparative study of closed reduction and fixation with percutaneous k-wires versus open reduction and internal fixation with philos plate for proximal humerus fractures in the elderlyDr. Kumar Anshuman and Gourishankar Patnaik

The aim of this study is to compare and evaluate functional, clinical and radiological outcome achieved by open reduction and internal fixation by Philos plate & percutaneous k-wire fixation of proximal humerus fracture in the elderly patients. In conclusion, locking Compression plate has a distinct advantage in treatment of proximal humeral fractures. This is due to angular stability, compression of fragment particularly in comminuted fractures and in Osteoporotic bones in elderly patients, thus allowing early mobilization. Percutaneous k-wire fixation can be a viable option in elderly patients where several comorbidities. They are particularly useful where we are dealing with patients who have constraint of finances and anesthestic risks of long hours of surgery.

Factors associated with screw penetration after plating for proximal humerus fractures of Neer types II & III

Objective To analyze the factors that influence screw penetration after plating for proximal humerus fractures of Neer two- or three-part. Methods We reviewed the patients with proximal humerus fracture of Neer types Ⅱ & Ⅲ who had been treated from January 2006 to June 2017. The data were documented regarding gender, age, Neer classification, osteoporosis, surgical procedure, cephalic screw number, type of medial support and screw penetration. They were divided into 2 groups according to the presence or absence of screw penetration. χ2 test and independent samples t test were used with software IBM SPSS 22.0. The multivariate logistic regression was used to identify the independent risk factors when there were two or more statistically significant factors. The two-side test was used and significance was set to P< 0.05. Results Altogether 78 patients were included in our analysis, including 27 males (34.62%) and 51 females (65.38%) with an average age of 57.41 years (from 18 to 85 years).Their average follow-up time was 7.7 months (from 3 to 24 months). There were 54 Neer two-part fractures (69.23%) and 24 Neer three-part ones (30.77%). Screw penetration was observed in 18 patients (23.08%) but not in the other 60 ones (76.92%). The χ2 test and independent samples t test revealed that screw penetration was significantly associated with gender (P=0.003), osteoporosis (P=0.003) and cephalic screw number (P=0.003) but not with age (P=0.256), Neer classification(P=0.754), surgical procedure( (P=0.308) or type of medial support (P=0.186). The multivariate logistic regression revealed that osteoporosis (P=0.027) and cephalic screw number (P=0.026) were independent risk factors for screw penetration. Conclusions After plating for proximal humerus fractures of Neer two- or three-part, the patients with osteoporosis and those receiving more than 5 cephalic screws may face a higher risk of screw penetration than those without osteoporosis and those receiving 4 cephalic screws. Key words: Shoulder fractures; Postoperative complications; Bone nails; Osteoporosis

Assessment of Screw Length of Proximal Humerus Internal Locking System (PHILOS) Plate for Proximal Humeral Fractures Using Three-Dimensional Computed Tomography Scan

BackgroundScrew perforation and varus collapse are common complications of treatment with a PHILOS (proximal humerus internal locking system) plate for proximal humerus fractures, which are associated with improper screw length selection and lack of medial column support. The purposes of this study were: (1) to measure the proper length of periarticular screws of the PHILOS plate in the humeral head, and (2) to determine what factors influence the screw length and implantation of the inferomedial support screw.Material/MethodsComputed tomography (CT) images of the normal proximal humerus in 134 cases were retrospectively reviewed. The length of periarticular screws was measured using three-dimensional (3D) techniques. Intraobserver and interobserver reliability of measurement were evaluated using intraclass correlation coefficients (ICCs). Sex and body height influences on screw length and implantation of the inferomedial screw were analyzed.ResultsAll measurements had excellent agreement (ICC>0.75). The screw length and implantation rate of the inferomedial screw were greater in males than in females. Positive correlations were observed between body height and screw length and implantation of the inferomedial screw (all P<0.001).ConclusionsThe screws were longer and the implantation rate was higher for inferomedial screws in males than in females, and were positively correlated with body height. Our data can be used as a reference for surgeons to reduce the number of times screws are changed intraoperatively and to reduce operation duration and minimize use of intraoperative fluoroscopy for proximal humerus fractures treated with the PHILOS plate.