Plastid Genetic Engineering Research Articles

Comparative Analysis of Chloroplast Genomes for the Genus Manglietia Blume (Magnoliaceae): Molecular Structure and Phylogenetic Evolution.

Manglietia Blume, belonging to the Magnoliaceae family and mainly distributed in tropical and subtropical regions of Asia, has great scientific and economic value. In this study, we employed next-generation sequencing followed by de novo assembly to investigate the adaptive evolution of Manglietia using plastid genetic information. We newly sequenced the complete or nearly complete plastomes of four Manglietia species (Manglietia aromatica, Manglietia calcarea, Manglietia kwangtungensis, and Manglietia glauca) and conducted comparative analysis with seventeen published plastomes to examine the evolutionary pattern within this genus. The plastomes of these five newly sequenced Manglietia species range from 157,093 bp (M. calcarea2) to 160,493 bp (M. kwangtungensis), all exhibiting circular structures when mapped. Nucleotide diversity was observed across the plastomes, leading us to identify 13 mutational hotspot regions, comprising eight intergenic spacer regions and five gene regions. Our phylogenetic analyses based on 77 protein-coding genes generated phylogenetic relationships with high support and resolution for Manglietia. This genus can be divided into three clades, and the previously proposed infrageneric classifications are not supported by our studies. Furthermore, the close affinity between M. aromatica and M. calcarea is supported by the present work, and further studies are necessary to conclude the taxonomic treatment for the latter. These results provide resources for the comparative plastome, breeding, and plastid genetic engineering of Magnoliaceae and flowering plants.

Plastid engineering using episomal DNA.

Novel episomal systems have the potential to accelerate plastid genetic engineering for application in plant synthetic biology. Plastids represent valuable subcellular compartments for genetic engineering of plants with intrinsic advantages to engineering the nucleus. The ability to perform site-specific transgene integration by homologous recombination (HR), coordination of transgene expression in operons, and high production of heterologous proteins, all make plastids an attractive target for synthetic biology. Typically, plastid engineering is performed by homologous recombination; however, episomal-replicating vectors have the potential to accelerate the design/build/test cycles for plastid engineering. By accelerating the timeline from design to validation, it will be possible to generate translational breakthroughs in fields ranging from agriculture to biopharmaceuticals. Episomal-based plastid engineering will allow precise single step metabolic engineering in plants enabling the installation of complex synthetic circuits with the ambitious goal of reaching similar efficiency and flexibility of to the state-of-the-art genetic engineering of prokaryotic systems. The prospect to design novel episomal systems for production of transplastomic marker-free plants will also improve biosafety for eventual release in agriculture.

Plastidial Expression of 3β-Hydroxysteroid Dehydrogenase and Progesterone 5β-Reductase Genes Confer Enhanced Salt Tolerance in Tobacco.

The short-chain dehydrogenase/reductase (SDR) gene family is widely distributed in all kingdoms of life. The SDR genes, 3β-hydroxysteroid dehydrogenase (3β-HSD) and progesterone 5-β-reductases (P5βR1, P5βR2) play a crucial role in cardenolide biosynthesis pathway in the Digitalis species. However, their role in plant stress, especially in salinity stress management, remains unexplored. In the present study, transplastomic tobacco plants were developed by inserting the 3β-HSD, P5βR1 and P5βR2 genes. The integration of transgenes in plastomes, copy number and transgene expression at transcript and protein level in transplastomic plants were confirmed by PCR, end-to-end PCR, qRT-PCR and Western blot analysis, respectively. Subcellular localization analysis showed that 3β-HSD and P5βR1 are cytoplasmic, and P5βR2 is tonoplast-localized. Transplastomic lines showed enhanced growth in terms of biomass and chlorophyll content compared to wild type (WT) under 300 mM salt stress. Under salt stress, transplastomic lines remained greener without negative impact on shoot or root growth compared to the WT. The salt-tolerant transplastomic lines exhibited enhanced levels of a series of metabolites (sucrose, glutamate, glutamine and proline) under control and NaCl stress. Furthermore, a lower Na+/K+ ratio in transplastomic lines was also observed. The salt tolerance, mediated by plastidial expression of the 3β-HSD, P5βR1 and P5βR2 genes, could be due to the involvement in the upregulation of nitrogen assimilation, osmolytes as well as lower Na+/K+ ratio. Taken together, the plastid-based expression of the SDR genes leading to enhanced salt tolerance, which opens a window for developing saline-tolerant plants via plastid genetic engineering.

Mini‐synplastomes for plastid genetic engineering

SummaryIn the age of synthetic biology, plastid engineering requires a nimble platform to introduce novel synthetic circuits in plants. While effective for integrating relatively small constructs into the plastome, plastid engineering via homologous recombination of transgenes is over 30 years old. Here we show the design–build–test of a novel synthetic genome structure that does not disturb the native plastome: the ‘mini‐synplastome’. The mini‐synplastome was inspired by dinoflagellate plastome organization, which is comprised of numerous minicircles residing in the plastid instead of a single organellar genome molecule. The first mini‐synplastome in plants was developed in vitro to meet the following criteria: (i) episomal replication in plastids; (ii) facile cloning; (iii) predictable transgene expression in plastids; (iv) non‐integration of vector sequences into the endogenous plastome; and (v) autonomous persistence in the plant over generations in the absence of exogenous selection pressure. Mini‐synplastomes are anticipated to revolutionize chloroplast biotechnology, enable facile marker‐free plastid engineering, and provide an unparalleled platform for one‐step metabolic engineering in plants.

The complete chloroplast genome sequences of five Miscanthus species, and comparative analyses with other grass plastomes

BackgroundMiscanthus has been considered as potentially high-yielding biomass crop with the low-nutrient requirements, high capability of Carbon mitigation and water-use efficiency. Miscanthus species have restricted to investigate functional genomics of their large genome size, which leads to challenges to genomics-aided crop improvement. Sequencing of the plastid genomes of Miscanthus is one of complementary tool making it available for genetic researches. ResultsThe complete chloroplast (cp) genomes of five Miscanthus species were sequenced using Illumina sequencing. Comparisons between the five chloroplast genome sequences revealed their conservation in gene content and order, including the IR/SC boundaries. However, some hotspots in coding regions and intergenic regions also occurred. Specifically a 13 bp deletion in the intergenic region of rps16-trnQ and a 17 bp deletion in rps4-trnT are shared by Miscanthus lutarioriparius L., Miscanthus sacchariflorus N. and Miscanthus × giganteus. In addition, a 39 bp deletion in trnL-trnF is shared by Miscanthus sinensis A. and Miscanthus floridulus W.. Comparisons of complete chloroplast genome of Miscanthus lutarioriparius to five published grass chloroplast genomes also reveal several hotspot regions with high polymorphism. Phylogenetic analysis based on complete chloroplast genomes and coding sequences of 77 protein genes suggest a sister relationship between the Eumiscanthus clade and the Triarrhena clade. ConclusionsThis report is the first comprehensive comparative analyses on Miscanthus species cp genome combining other published grass chloroplast genomes. The availability of these results will supplement valuable genetic information and framework for further phylogeography, population genetics and plastid genetic engineering researches in Miscanthus.sp.

Plastid Genomes of Flowering Plants: Essential Principles.

The plastid genome (plastome ) has proved a valuable source of data for evaluating evolutionary relationships among angiosperms. Through basic and applied approaches, plastid transformation technology offers the potential to understand and improve plant productivity, providing food, fiber, energy, and medicines to meet the needs of a burgeoning global population. The growing genomic resources available to both phylogenetic and biotechnological investigations is allowing novel insights and expanding the scope of plastome research to encompass new species. In this chapter, we present an overview of some of the seminal and contemporary research that has contributed to our current understanding of plastome evolution and attempt to highlight the relationship between evolutionary mechanisms and the tools of plastid genetic engineering.

Plastome structure and adaptive evolution ofCalanthes.l. species

Calanthe s.l. is the most diverse group in the tribe Collabieae (Orchidaceae), which are pantropical in distribution. Illumina sequencing followed by de novo assembly was used in this study, and the plastid genetic information of Calanthe s.l. was used to investigate the adaptive evolution of this taxon. Herein, the complete plastome of five Calanthe s.l. species (Calanthe davidii, Styloglossum lyroglossa, Preptanthe rubens, Cephalantheropsis obcordata, and Phaius tankervilliae) were determined, and the two other published plastome sequences of Calanthe s.l. were added for comparative analyses to examine the evolutionary pattern of the plastome in the alliance. The seven plastomes ranged from 150,181 bp (C. delavayi) to 159,014 bp (C. davidii) in length and were all mapped as circular structures. Except for the three ndh genes (ndhC, ndhF, and ndhK) lost in C. delavayi, the remaining six species contain identical gene orders and numbers (115 gene). Nucleotide diversity was detected across the plastomes, and we screened 14 mutational hotspot regions, including 12 non-coding regions and two gene regions. For the adaptive evolution investigation, three species showed positive selected genes compared with others, C. obcordata (cemA), S. lyroglossa (infA, ycf1 and ycf2) and C. delavayi (nad6 and ndhB). Six genes were under site-specific positive selection in Calanthe s.l., namely, accD, ndhB, ndhD, rpoC2, ycf1, and ycf2, most of which are involved in photosynthesis. These results, including the new plastomes, provide resources for the comparative plastome, breeding, and plastid genetic engineering of orchids and flowering plants.

Accumulation of glycine betaine in transplastomic potato plants expressing choline oxidase confers improved drought tolerance

Plastid genome engineering is an effective method to generate drought-resistant potato plants accumulating glycine betaine in plastids. Glycine betaine (GB) plays an important role under abiotic stress, and its accumulation in chloroplasts is more effective on stress tolerance than that in cytosol of transgenic plants. Here, we report that the codA gene from Arthrobacter globiformis, which encoded choline oxidase to catalyze the conversion of choline to GB, was successfully introduced into potato (Solanum tuberosum) plastid genome by plastid genetic engineering. Two independent plastid-transformed lines were isolated and confirmed as homoplasmic via Southern-blot analysis, in which the mRNA level of codA was much higher in leaves than in tubers. GB accumulated in similar levels in both leaves and tubers of codA-transplastomic potato plants (referred to as PC plants). The GB content was moderately increased in PC plants, and compartmentation of GB in plastids conferred considerably higher tolerance to drought stress compared to wild-type (WT) plants. Higher levels of relative water content and chlorophyll content under drought stress were detected in the leaves of PC plants compared to WT plants. Moreover, PC plants presented a significantly higher photosynthetic performance as well as antioxidant enzyme activities during drought stress. These results suggested that biosynthesis of GB by chloroplast engineering was an effective method to increase drought tolerance.

Advances of selectable marker genes in plastid genetic engineering.

Plastid genetic engineering is a safer, more precise, and more efficient transgene expression system than the nuclear genetic transformation system. It has been widely used in basic research and biotechnology applications as the next-generation transgenic technology in plants. Similar to nuclear genetic transformation, selection markers are needed in plastid genetic engineering to identify 'true' transformants and acquire homoplasmy. Because of the high copy number of plastids, maternal inheritance of the plastid genome, and the long process of homogenization of transplastomic plants, the selection markers for plastid genetic engineering are different from those used in the nuclear transformation system. At present, antibiotic resistance genes are the most commonly used selectable markers in the transplastomic selections. However for biosafety reasons, they needed to be replaced with either alternative markers or marker-free systems for the plastid genetic engineering. In this review, we have evaluated and summarized the positive and negative features of the selectable markers and marker elimination strategies commonly used in the plastid engineering research in the literature on plastid genetic engineering research. In addition, we have reviewed the features of the reporter genes used in plastid genetic engineering. We hope this review can help improving the current and developing new selectable markers and marker removal systems, and further promote the development of plastid genetic engineering, especially on the monocotyledonous plants.

Mimosoid legume plastome evolution: IR expansion, tandem repeat expansions and accelerated rate of evolution in clpP

The Leguminosae has emerged as a model for studying angiosperm plastome evolution because of its striking diversity of structural rearrangements and sequence variation. However, most of what is known about legume plastomes comes from few genera representing a subset of lineages in subfamily Papilionoideae. We investigate plastome evolution in subfamily Mimosoideae based on two newly sequenced plastomes (Inga and Leucaena) and two recently published plastomes (Acacia and Prosopis), and discuss the results in the context of other legume and rosid plastid genomes. Mimosoid plastomes have a typical angiosperm gene content and general organization as well as a generally slow rate of protein coding gene evolution, but they are the largest known among legumes. The increased length results from tandem repeat expansions and an unusual 13 kb IR-SSC boundary shift in Acacia and Inga. Mimosoid plastomes harbor additional interesting features, including loss of clpP intron1 in Inga, accelerated rates of evolution in clpP for Acacia and Inga, and dN/dS ratios consistent with neutral and positive selection for several genes. These new plastomes and results provide important resources for legume comparative genomics, plant breeding, and plastid genetic engineering, while shedding further light on the complexity of plastome evolution in legumes and angiosperms.

Post-harvest light treatment increases expression levels of recombinant proteins in transformed plastids of potato tubers.

Plastid genetic engineering represents an attractive system for the production of foreign proteins in plants. Although high expression levels can be achieved in leaf chloroplasts, the results for non-photosynthetic plastids are generally discouraging. Here, we report the expression of two thioredoxin genes (trx f and trx m) from the potato plastid genome to study transgene expression in amyloplasts. As expected, the highest transgene expression was detected in the leaf (up to 4.2% of TSP). The Trx protein content in the tuber was approximately two to three orders of magnitude lower than in the leaf. However, we demonstrate that a simple post-harvest light treatment of microtubers developed in vitro or soil-grown tubers induces up to 55 times higher accumulation of the recombinant protein in just seven to ten days. After the applied treatment, the Trx f levels in microtubers and soil-grown tubers increased to 0.14% and 0.11% of TSP, respectively. Moreover, tubers stored for eight months maintained the capacity of increasing the foreign protein levels after the light treatment. Post-harvest cold induction (up to five times) at 4°C was also detected in microtubers. We conclude that plastid transformation and post-harvest light treatment could be an interesting approach for the production of foreign proteins in potato.

Evolutionary and biotechnology implications of plastid genome variation in the inverted‐repeat‐lacking clade of legumes

Land plant plastid genomes (plastomes) provide a tractable model for evolutionary study in that they are relatively compact and gene dense. Among the groups that display an appropriate level of variation for structural features, the inverted-repeat-lacking clade (IRLC) of papilionoid legumes presents the potential to advance general understanding of the mechanisms of genomic evolution. Here, are presented six complete plastome sequences from economically important species of the IRLC, a lineage previously represented by only five completed plastomes. A number of characters are compared across the IRLC including gene retention and divergence, synteny, repeat structure and functional gene transfer to the nucleus. The loss of clpP intron 2 was identified in one newly sequenced member of IRLC, Glycyrrhiza glabra. Using deeply sequenced nuclear transcriptomes from two species helped clarify the nature of the functional transfer of accD to the nucleus in Trifolium, which likely occurred in the lineage leading to subgenus Trifolium. Legumes are second only to cereal crops in agricultural importance based on area harvested and total production. Genetic improvement via plastid transformation of IRLC crop species is an appealing proposition. Comparative analyses of intergenic spacer regions emphasize the need for complete genome sequences for developing transformation vectors for plastid genetic engineering of legume crops.

Improvement of Lactuca sativa slat Tolerance by Plastid Transformation with BADH Gene

Salinity is one of the major factors that limits geographical distribution of plants and adversely affects crop productivity and quality.Here high-level expression of betaine aldehyde dehydrogenase (BADH) was reported in cultured explantsof lettuce via plastid genetic engineering. Lettuce (Lactucasativa) plant was primarilyexperimented for tolerance of betaine aldehyde (BA) and soudium chloride(NaCl) by tissue culture technique and it was found that the wild typelettuce tolerated 10 and 75 mM from each substance respectively. Genesrequired in this study were amplified by polymerase chain reaction (PCR)technique using specific forward and reverse primers, and these genes wereBADH, prrn promoter and many other regulatory genes. Some ofthese genes were isolated from their hosts and some were obtained fromprevious work available at Daniell laboratory. All these genes beside manytechniques for ligation, extension, sequencing, orientation confirmationwere used to construct the cassette vector pLS-BADH-LS whichcarries the gene of interest. Homoplasmic transgenic plants exhibiting high levels of salt tolerance were regenerated from bombarded cell cultures via somatic embryogenesis. Transgenic lettuce plants expressing BADH grew in the presence of high concentrations of NaCl (up to 150mM), the highest level of salt tolerance reported so far among genetically modified lettuce, and the tolerance to betaine aldehyde was 30 mM.

Unsolved problems in plastid transformation

Plants have been proved as a novel production platform for a wide range of biologically important compounds such as enzymes, therapeutic proteins, antibiotics, and proteins with immunological properties. In this context, plastid genetic engineering can be potentially used to produce recombinant proteins. However, several challenges still remain to be overcome if the full potential of plastid transformation technology is to be realized. They include the development of plastid transformation systems for species other than tobacco, the expression of transgenes in non-green plastids, the increase of protein accumulation and the appearance of pleiotropic effects. In this paper, we discuss the novel tools recently developed to overcome some limitations of chloroplast transformation.

Plastid genetic engineering in Solanaceae

Plastid genetic engineering has come of age, becoming today an attractive alternative approach for the expression of foreign genes, as it offers several advantages over nuclear transformants. Significant progress has been made in plastid genetic engineering in tobacco and other Solanaceae plants, through the use of improved regeneration procedures and transformation vectors with efficient promoters and untranslated regions. Many genes encoding for industrially important proteins and vaccines, as well as genes conferring important agronomic traits, have been stably integrated and expressed in the plastid genome. Despite these advances, it remains a challenge to achieve marked levels of plastid transgene expression in non-green tissues. In this review, we summarize the basic requirements of plastid genetic engineering and discuss the current status, limitations, and the potential of plastid transformation for expanding future studies relating to Solanaceae plants.

Chloroplast Genomics and Genetic Engineering for Crop Improvement

Chloroplast genome sequence information is crucial for understanding the evolutionary relationship among photosynthetic organisms and in chloroplast (plastid) genetic engineering for agricultural biotechnology applications. Plastid transformation technology in crop plants offers numerous advantages over nuclear transformation, including high transgene expression, multiple transgene stacking through operon transfer to plastid genome, lack of epigenetic gene silencing and transgene containment due to maternal inheritance of plastids. More importantly, this technology permits expression of native bacterial genes at much higher level than the levels achievable in nucleus. However, only a handful of crops are amenable to routine plastid transformation due to technical difficulties. The plastid transformation in plants necessitates development of species-specific transgene delivery vector, which ideally should consist of homologous recombination sequences and endogenous plastid regulatory elements for efficient transgene integration and stable protein expression. However, inadequate plastid genome sequence information in majority of agriculturally important species has limited the development of transplastomic crops with desired traits. The recent advancement in high-throughput genome sequencing has resulted in the availability of complete plastid genome sequences in more than 230 photosynthetic organisms, including more than 130 higher plants. The availability of genome sequence data of more crop plants will offer an opportunity to construct species-specific plastid vectors, thus provide a newer platform for efficient plastid genetic engineering with a variety of agronomic applications, including high insect and pathogen resistance, herbicide resistance, tolerance to drought, salt and cold stresses, cytoplasmic male sterility, metabolic pathway engineering, production of antigens, biopharmaceuticals and bio-fuels. However, the major challenges ahead are to develop and implement this novel toolkit efficiently in most major crops for desirable agronomic applications.

Chloroplast‐derived vaccines against human diseases: achievements, challenges and scopes

Infectious diseases represent a continuously growing menace that has severe impact on health of the people worldwide, particularly in the developing countries. Therefore, novel prevention and treatment strategies are urgently needed to reduce the rate of these diseases in humans. For this reason, different options can be considered for the production of affordable vaccines. Plants have been proved as an alternative expression system for various compounds of biological importance. Particularly, plastid genetic engineering can be potentially used as a tool for cost-effective vaccine production. Antigenic proteins from different viruses and bacteria have been expressed in plastids. Initial immunological studies of chloroplast-derived vaccines have yielded promising results in animal models. However, because of certain limitations, these vaccines face many challenges on production and application level. Adaptations to the novel approaches are needed, which comprise codon usage and choice of proven expression cassettes for the optimal yield of expressed proteins, use of inducible systems, marker gene removal, selection of specific antigens with high immunogenicity and development of tissue culture systems for edible crops to prove the concept of low-cost edible vaccines. As various aspects of plant-based vaccines have been discussed in recent reviews, here we will focus on certain aspects of chloroplast transformation related to vaccine production against human diseases.

Complete plastid genome sequence of the chickpea ( Cicer arietinum) and the phylogenetic distribution of rps12 and clpP intron losses among legumes (Leguminosae)

Chickpea ( Cicer arietinum, Leguminosae), an important grain legume, is widely used for food and fodder throughout the world. We sequenced the complete plastid genome of chickpea, which is 125,319 bp in size, and contains only one copy of the inverted repeat (IR). The genome encodes 108 genes, including 4 rRNAs, 29 tRNAs, and 75 proteins. The genes rps16, infA, and ycf4 are absent in the chickpea plastid genome, and ndhB has an internal stop codon in the 5′exon, similar to other legumes. Two genes have lost their introns, one in the 3′exon of the transpliced gene rps12, and the one between exons 1 and 2 of clpP; this represents the first documented case of the loss of introns from both of these genes in the same plastid genome. An extensive phylogenetic survey of these intron losses was performed on 302 taxa across legumes and the related family Polygalaceae. The clpP intron has been lost exclusively in taxa from the temperate “IR-lacking clade” (IRLC), whereas the rps12 intron has been lost in most members of the IRLC (with the exception of Wisteria, Callerya, Afgekia, and certain species of Millettia, which represent the earliest diverging lineages of this clade), and in the tribe Desmodieae, which is closely related to the tribes Phaseoleae and Psoraleeae. Data provided here suggest that the loss of the rps12 intron occurred after the loss of the IR. The two new genomic changes identified in the present study provide additional support of the monophyly of the IR-loss clade, and resolution of the pattern of the earliest-branching lineages in this clade. The availability of the complete chickpea plastid genome sequence also provides valuable information on intergenic spacer regions among legumes and endogenous regulatory sequences for plastid genetic engineering.

Plastid-expressed choline monooxygenase gene improves salt and drought tolerance through accumulation of glycine betaine in tobacco

Glycine betaine (GlyBet), a quaternary ammonium compound, functions as an osmoprotectant in many organisms including plants. Previous research has shown that over-expression of enzymes for GlyBet biosynthesis in transgenic plants improved abiotic stress tolerance, but so far no study on the effects of plastid-expression of choline monooxygenase, the enzyme that catalyzes the conversion of choline into betaine aldehyde, has been reported. In the present study, tobacco (Nicotiana tabacum L. cv Wisconsin 38) plants were transformed with a gene for choline monooxygenase (BvCMO) from beet (Beta vulgaris) via plastid genetic engineering. Transplastomic plants constitutively expressing BvCMO under the control of the ribosomal RNA operon promoter and a synthetic T7 gene G10 leader were able to accumulate GlyBet in leaves, roots and seeds, and exhibited improved tolerance to toxic level of choline and to salt/drought stress when compared to wild type plants. Transplastomic plants also demonstrated higher net photosynthetic rate and apparent quantum yield of photosynthesis in the presence of 150 mM NaCl. Salt stress caused no significant change on the maximal efficiency of PSII photochemistry (Fv/Fm) in both wild type and transplastomic plants, but a decrease in the actual efficiency of PSII (PhiPSII) was observed, and such a decrease was much greater in wild type plants. Our results demonstrate the feasibility of improving salt and drought tolerance in plants through plastid transformation with BvCMO gene.

Plastid-expressed betaine aldehyde dehydrogenase gene in carrot cultured cells, roots, and leaves confers enhanced salt tolerance.

Salinity is one of the major factors that limits geographical distribution of plants and adversely affects crop productivity and quality. We report here high-level expression of betaine aldehyde dehydrogenase (BADH) in cultured cells, roots, and leaves of carrot (Daucus carota) via plastid genetic engineering. Homoplasmic transgenic plants exhibiting high levels of salt tolerance were regenerated from bombarded cell cultures via somatic embryogenesis. Transformation efficiency of carrot somatic embryos was very high, with one transgenic event per approximately seven bombarded plates under optimal conditions. In vitro transgenic carrot cells transformed with the badh transgene were visually green in color when compared to untransformed carrot cells, and this offered a visual selection for transgenic lines. BADH enzyme activity was enhanced 8-fold in transgenic carrot cell cultures, grew 7-fold more, and accumulated 50- to 54-fold more betaine (93-101 micromol g(-1) dry weight of beta-Ala betaine and Gly betaine) than untransformed cells grown in liquid medium containing 100 mm NaCl. Transgenic carrot plants expressing BADH grew in the presence of high concentrations of NaCl (up to 400 mm), the highest level of salt tolerance reported so far among genetically modified crop plants. BADH expression was 74.8% in non-green edible parts (carrots) containing chromoplasts, and 53% in proplastids of cultured cells when compared to chloroplasts (100%) in leaves. Demonstration of plastid transformation via somatic embryogenesis utilizing non-green tissues as recipients of foreign DNA for the first time overcomes two of the major obstacles in extending this technology to important crop plants.