Stainless steel frames with compact cross-sections are capable of redistributing internal forces at room temperature and forming plastic failure mechanisms, which is reflected in the new generation of structural codes for stainless steel by allowing to carry out global plastic analyses on certain types of stainless steel if the joints conforming the structure are classified as full-strength joints. Nevertheless, the requirements for the fire design of stainless steel structures in current standards is still primarily based on the resistance of individual members, disregarding strain hardening effects and the redistribution of internal forces, mainly because the influence of the performance of stainless steel joints on the response of the frames under fire situation is yet unknown. On this basis, this paper presents a numerical study focused on stainless steel frames with compact rectangular hollow sections, both at room temperature and at elevated temperatures, to analyse the influence of full-strength joints on the frame's response by means of two joint modelling techniques, and to assess the plastic redistribution capacity of stainless steel frames, especially under fire situation. In addition, an exhaustive revision of the failure criteria for stainless steel frames under fire situation is carried out and a new failure criterion is proposed based on the results derived from the parametric study. The results demonstrate that stainless steel frames are also capable of redistributing internal forces and forming plastic collapse mechanisms under fire situations, suggesting a new procedure to predict the response of these structures under fire situation more accurately.