Plastic Mesh Research Articles

Mechanical performance of eco-friendly self-compacting concrete (SCC) mixtures and two-way slabs partially containing cement kiln dust as cement replacement and internally reinforced with waste plastic mesh

A large quantity of cement kiln dust (CKD) is produced annually during the production of Portland cement. The majority of the produced CKD remains unused except in specific cases related to soil stabilization projects. The current research investigates the production of self-compacting concrete (SCC) mixtures, in which CKD is used as a substitute for cement in different weight proportions, 3 %, 6 %, 9 %, 12 %, and 15 %. The hardened mechanical properties of SCC, such as compressive strength, splitting tensile strength, and flexural strength, as well as the fresh state characteristics (i.e., slump flow diameter, T500, V-funnel, and L-box tests), were recorded and compared with the control mixture which was entirely cast using cement. Results revealed that with an increase in the CKD content beyond 6 %, the slump flow diameter of SCC mixtures significantly decreased. Also, the increase ratios in the V-Funnel flow time for self-compacting concrete mixtures, when replacing cement with CKD ratios of 3 %, 6 %, 9 %, 12 %, and 15 %, were 13.3 %, 30 %, 46 %, 58 %, and 66.7 % respectively, compared with the reference mixture. Additionally, the impact behavior of two-way SCC slabs cast using CKD ratios ranging from 3 to 15 % and internally strengthened using various patterns of recycled plastic mesh was investigated. Strengthening the SCC slabs using two layers of recycled plastic grids proved to be effective in preventing the projectile from penetrating the whole thickness of the SCC slabs, regardless of the CKD content.

The Effects of Enrichment on Zoo-Housed Scarlet Ibis Behavior.

Good zoo animal welfare is commonly promoted with environmental enrichment; however, some species are less likely to be offered enrichment than others. This study tested the effect of enrichment on a group of scarlet ibises from Zoomarine Algarve, Portugal. The study consisted of a first baseline condition, followed by four types of enrichment displays with individual presentations, a post-enrichment condition, and a post-enrichment with all enrichment types presented simultaneously. The enrichment types chosen were physical, with a tidal simulation in the lakes of the enclosure; nutritional, presenting mussels in a plastic mesh tube; sensory, by playing scarlet ibises calls; and tactile, with brushes through the habitat. The data collection was performed for 21 days between January and March 2021, 3 times a day, using scan sampling and instantaneous time sampling every 2 min. The comparison between conditions revealed that most behaviors showed similarity between the baseline and post-enrichment conditions, suggesting that after removing the enrichment, the behaviors returned to their initial baseline. It was also found that each enrichment influenced different types of behaviors and these behaviors also changed depending on the time of day. Exploratory behavior was only associated with the presence of enrichment, and vocalizations were only heard after the sensory enrichment was performed. This study demonstrates that the use of physical and tactile enrichments increased activity and decreased stationary behaviors in this group of ibises and may be used to improve their lives in zoological contexts if included in the housing and husbandry protocols.

Optimization of the intermediate chamber improves desalination performance in flow electrode capacitive deionization (FCDI): A comparative study

Flow electrode capacitive deionization (FCDI), a novel ion removal technology, is influenced by various factors such as electrode material properties, fluid flow rate, and device structure. In the FCDI system, the intermediate chamber is the core element where ions migrate towards the cathode and anode to complete the adsorption process. In this study, we designed a hollow plastic plate with channels (PP) and a hollow graphite plate with channels (GP) as the intermediate chamber, compare and study with conventional plastic mesh (PM) chambers. CFD simulations revealed that the newly designed PP and GP chambers significantly reduced the hydraulic stagnation zone. The results of the desalination experiments revealed that the desalination efficiency of the GP-FCDI was 1.5 and 1.9 times higher than that of the PP-FCDI and PM-FCDI, respectively. At the same time, in situ potential measurement (ISPM) was used to monitor the voltage drop of each component in FCDI, thereby accurately calculated the proportion of energy consumption in the intermediate chamber. The results indicate that the energy consumption of the intermediate chamber of GP-FCDI was 54 % less than that of PM-FCDI. The current work will help us provide new insights for the design and optimization of FCDI systems.

Using fly ash-plastic mesh bags wastes mixture as a recoverable resource for soil stabilization

ABSTRACT Soil stabilization by waste materials such as fly ash and plastic waste is a sustainable approach that has shown promising improvements. However, research has primarily focused on their individual effects and on the use of conventional plastic materials possessing smooth surface, leaving a gap in understanding the individual and combined influence of plastic mesh textile bags (WPTB), known for their rough texture. The current study aims to assess the soil compaction and shear behaviors treated with fly ash (10-30%) and WPTB at varying lengths and concentrations (0.5-1.5%). Subsequently, a combination of the optimal 25% fly ash with WPTB was evaluated. The results when compared with the untreated soil, indicated significant improvements by 8.93% for dry unit weight, 80.26% for cohesion and 148.4% for angle of friction when combining 25% fly ash with 0.5% plastic strips of 5 cm length. Overall, these materials hold potential for enhancing construction and mitigating environmental hazards.

Unraveling the secrets of plant roots: Simplified method for large scale root exudate sampling and analysis in Arabidopsis thaliana

Background Plants exude a plethora of compounds to communicate with their environment. Although much is known about above-ground plant communication, we are only beginning to fathom the complexities of below-ground chemical communication channels. Studying root-exuded compounds and their role in plant communication has been difficult due to the lack of standardized methodologies. Here, we develop an interdisciplinary workflow to explore the natural variation in root exudate chemical composition of the model plant Arabidopsis thaliana. We highlight key challenges associated with sampling strategies and develop a framework for analyzing both narrow- and broad-scale patterns of root exudate composition in a large set of natural A. thaliana accessions. Methods Our method involves cultivating individual seedlings in vitro inside a plastic mesh, followed by a short hydroponic sampling period in small quantities of ultrapure water. The mesh makes it easy to handle plants of different sizes and allows for large-scale characterization of individual plant root exudates under axenic conditions. This setup can also be easily extended for prolonged temporal exudate collection experiments. Furthermore, the short sampling time minimizes the duration of the experiment while still providing sufficient signal even with small volume of the sampling solution. We used ultra-high performance liquid chromatography coupled with quadrupole time-of-flight mass spectrometry (UHPLC-QTOF-MS) for untargeted metabolic profiling, followed by tentative compound identification using MZmine3 and SIRIUS 5 software, to capture a broad overview of root exudate composition in A. thaliana accessions. Results Based on 28 replicates of the Columbia genotype (Col-0) compared with 10 random controls, MZmine3 annotated 354 metabolites to be present only in Col-0 by negative ionization. Of these, 254 compounds could be annotated by SIRIUS 5 software. Conclusions The methodology developed in this study can be used to broadly investigate the role of root exudates as chemical signals in plant belowground interactions.

Unraveling the secrets of plant roots: Simplified method for large scale root exudate sampling and analysis in Arabidopsis thaliana.

Background: Plants exude a plethora of compounds to communicate with their environment. Although much is known about above-ground plant communication, we are only beginning to fathom the complexities of below-ground chemical communication channels. Studying root-exuded compounds and their role in plant communication has been difficult due to the lack of standardized methodologies. Here, we develop an interdisciplinary workflow to explore the natural variation in root exudate chemical composition of the model plant Arabidopsis thaliana. We highlight key challenges associated with sampling strategies and develop a framework for analyzing both narrow- and broad-scale patterns of root exudate composition in a large set of natural A. thaliana accessions. Methods: Our method involves cultivating individual seedlings in vitro inside a plastic mesh, followed by a short hydroponic sampling period in small quantities of ultrapure water. The mesh makes it easy to handle plants of different sizes and allows for large-scale characterization of individual plant root exudates under axenic conditions. This setup can also be easily extended for prolonged temporal exudate collection experiments. Furthermore, the short sampling time minimizes the duration of the experiment while still providing sufficient signal even with small volume of the sampling solution. We used ultra-high performance liquid chromatography coupled with quadrupole time-of-flight mass spectrometry (UHPLC-QTOF-MS) for untargeted metabolic profiling, followed by tentative compound identification using MZmine3 and SIRIUS 5 software, to capture a broad overview of root exudate composition in A. thaliana accessions. Results: Based on 28 replicates of the Columbia genotype (Col-0) compared with 10 random controls, MZmine3 identified 354 metabolites to be present only in Col-0 by negative ionization. Of these, 254 compounds could be annotated by SIRIUS 5 software. Conclusions: The methodology developed in this study can be used to broadly investigate the role of root exudates as chemical signals in plant belowground interactions.

Ineffectiveness of plastic mesh for protecting artificial freshwater turtle nests from red fox (Vulpes vulpes) predation

AbstractInvasive mammalian predators are efficient at driving native animal declines. The red fox (Vulpes vulpes) kills millions of endemic reptiles in Australia each year. In areas of south‐eastern Australia, the eastern long‐necked turtle (Chelodina longicollis) and Murray River turtle (Emydura macquarii) have declined by more than 50%. High rates of nest predation by foxes limit the recruitment of young turtles in these populations, but previous methods of fox control have been ineffective at protecting turtle nests. Here, we tested the effectiveness of plastic mesh for protecting artificial turtle nests from predation by foxes, in the mid‐Murray catchment, Victoria. We also tested whether protecting a large number of artificial nests in a given area encourages foxes to give up foraging following predictions from giving‐up density theory. We made a series of plots, each containing 32 artificial turtle nests. In each plot, we covered a percentage (0%, 25%, 50%, 81% or 100%) of the nests with either 1 or 2 sheets of plastic mesh. We used remote cameras to photograph and identify any predator that attacked nests in the plots. The cameras also allowed us to estimate the amount of time a fox was visible on each plot, as a metric of how much effort foxes expended on protected nests. Nest survival rate was not increased by either 1 or 2 sheets of mesh, and increasing the number of protected nests on a plot did not reveal a giving‐up density (GUD) value for fox foraging behaviour. Our study demonstrates that plastic mesh is not effective for protecting artificial turtle nests from foxes in this region.

Potential for Introduction of African Swine Fever Virus into High-Biosecurity Pig Farms by Flying Hematophagous Insects

Background. DNA of African swine fever virus (ASFV) has previously been detected in hematophagous insects on ASF outbreak farms. However, it remains unclear whether the viral DNA derived from blood meals that originated from pigs on the outbreak farm or was introduced from infected domestic pigs or wild boar sources located outside of the outbreak farm. Methods. We caught 644 hematophagous insects on the windows at two non-outbreak high-biosecurity pig farms (i.e., without ASFV-infected pigs) using plastic meshes coated with sticky glue, as well as 3576 hematophagous insects using H-traps on or around the farms. Using PCR analyses, we identified which insects were present, whether these hematophagous insects carried blood from an external (exogenous) source and if the blood contained ASFV DNA. Results. We found blood meals with ASFV DNA in one pool of five Haematopota spp. in the H-traps. From the window traps, we found 0–2.7% of Haematopota spp., Stomoxys calcitrans, and Aedes spp. carrying blood meals from exogenous sources into the farms. Some insects carried bovine blood; the closest registered source for this was 2500m from the pig farm. Conclusion. Hematophagous insects carrying ASFV-positive blood meals or blood meals from exogenous sources seem to be attracted to high-biosecurity pig farms and attempt to enter them through their windows. Despite the small percentage of insects carrying blood and the small amounts carried by each insect, the large numbers of insects result in a sufficient volume of exogenous blood, potentially containing ASFV, to constitute a non-negligible risk for ASFV-introduction into unprotected pig stables. This study is the first to provide quantitative data on the number of hematophagous insects trying to enter high-biosecurity pig farms. It is also the first to provide information about the origin of their blood meals, indicating that insect-borne introduction of blood containing ASFV into high-biosecurity pig farms is possible and, therefore, could potentially be responsible for some of the outbreaks observed during the summer peaks of infection.

Experimental and Numerical Investigation of the Flexural Behavior of Mortar Beams Strengthened with Recycled Plastic Mesh

The generation of plastic waste is increasing all over the world at an alarming rate, therefore raising concerns related to its disposal. As space for landfilling is becoming scarce and as incinerating the plastic waste leads to the release of toxic elements into the environment, recycling becomes a viable and an attractive option in pursuit of sustainable development. This paper investigates the flexural behavior of mortar beams reinforced with recycled plastic mesh. To achieve this objective, 27 mortar beams were prepared, with 24 of them containing waste plastic mesh with different void ratios and effective widths. All beams were cured for 28 days and then tested using a three-point bending test. Mid-span deflection was measured for each increment of load to obtain the load deflection curve. Moreover, a numerical simulation was performed on all mortar specimens using finite element software ABAQUS and a comparison was made with the experimental analysis. Test results showed that the addition of plastic mesh increased the flexural toughness and ductility of mortar beams. Furthermore, it was noticed that as the effective width ratio increased from 0 to 0.58, the ultimate capacity and flexural toughness increased. Beyond this level, a decrease was observed. On the other hand, the ductility index was proportional to the flexural toughness for all mesh effective width ratios. Comparing the ultimate capacity, flexural toughness and ductility index between the experimental and numerical data, there was a difference of up to 7%. This indicates that the numerical output can be a good predictor of the performance of plastic inside the mortar. Hence, using recycled plastic mesh could be recommended for improving the flexural performance of mortar beams, creating a sustainable composite.

Producción de restos vegetales y descomposición de hojarasca foliar bajo distintas intensidades de corta en fajas en matorrales

Biomass extraction in native forests can induce changes in the functioning of these ecosystems; these changes are poorly studied, and this represents a knowledge gap. In this work, we evaluated the response of plant litter production and decomposition to increasing intensities of strip cutting in native scrublands. We set an experiment replicated in three sites: hillside with southern exposure (FS), hillside with northern exposure (FN) and valley bottom (R), with four intensities of strip cutting (0, 30, 50, and 70% of the area). To evaluate decomposition, we used bags filled with ñire leaves (Nothofagus antarctica), and for the production of litter, plastic mesh collectors. In addition, vegetation height and cover were measured. In the three sites, we observed the same temporal pattern of decomposition, with a marked decrease in organic matter during the coldest period of the year. The effects of cutting intensity were strongly influenced by the site: at FS, litter production increased, but there was no effect on decomposition; in contrast, at FN and R, production decreased and a curvilinear pattern was observed, with highest decomposition at intermediate harvest intensity. Aerial cover was positively correlated with production, and this, in turn, negatively correlated with decomposition. Our results suggest that in scrublands with high vegetation cover, strip cutting could promote litter production without affecting decomposition. In contrast, less productive sites with lower vegetation cover would be more sensitive to forestry interventions.

Unraveling the secrets of plant roots: Simplified method for large scale root exudate sampling and analysis in Arabidopsis thaliana

Background: Plants exude a plethora of compounds to communicate with their environment. Although much is known about above-ground plant communication, we are only beginning to fathom the complexities of below ground chemical communication channels. Studying root-exuded compounds and their role in plant communication has been difficult due to a lack of standardized methodologies. Here, we develop an interdisciplinary workflow to explore the natural variation in root exudate chemical composition of the model plant Arabidopsis thaliana. We highlight key challenges associated with sampling strategies and develop a framework for analyzing both narrow and broad scale patterns of root exudate composition in a large set of natural A. thaliana accessions. Methods: Our method involves cultivating individual seedlings in vitro inside a plastic mesh, followed by a short hydroponic sampling period in small quantities of ultrapure water. The mesh makes it easy to handle plants of different sizes and allows for large-scale characterization of individual plant root exudates in axenic conditions. This setup can also be easily extended for prolonged temporal exudate collection experiments. Furthermore, the short sampling time minimizes the duration of the experiment while still providing sufficient signal even with a small volume of sampling solution. We used ultra-high performance liquid chromatography coupled with quadrupole time-of-flight mass spectrometry (UHPLC-QTOF-MS) for untargeted metabolic profiling, followed by tentative compound identification using MZMine3 and SIRIUS 5 software, to capture a broad overview of root exudate composition in A. thaliana accessions. Results: Based on 28 replicates of Columbia genotype (Col-0) compared with 10 random biological controls, MZMine3 identified 354 metabolites to be present only in Col-0 by negative ionization. Of these, 313 compounds could be annotated by SIRIUS 5 software. Conclusions: The methodology developed in this study can be used to broadly investigate the role of root exudates as chemical signals in plant belowground interactions.

Influence of BFRP Mesh on UHPC Wet Bonding Performance

As an effective method of strengthening concrete in the marine environment, wet bonding has maintained an efficient application mode for many years. At present, research on the wet bonding behavior of UHPC is very rare, so in order to investigate the interfacial bonding performance between basalt fiber-reinforced plastic (BFRP) mesh cloth and ultra-high performance concrete (UHPC) under wet bonding conditions, forty-eight BFRP-UHPC specimens were carried out to investigate the influence of dry/wet bonding type, mesh depth, and mesh thickness on the interfacial bonding performance between BFRP and UHPC, and the failure mechanism of the BFRP-UHPC interface was revealed by SEM detection. The test results show that the interfacial wet bonding performance between BFRP and UHPC is better than that of the dry bonding process. With the increasing thickness of BFRP mesh, the interfacial bonding stress of dry and wet bonding shows the opposite trend, respectively. The fiber interlayer structure is the weak link of BFRP; with the increase in mesh depth, the bonding normal stress decreases gradually. When the mesh depth of wet-bonded BFRP is 5 mm, the reinforcement effect is the best, the maximum increase of interfacial bonding stress is 74%, and the tensile strength ratio is as high as 1.74. Compared with the traditional FRP reinforced construction without fiber mesh, the BFRP mesh structure can greatly improve the wet bonding performance, which can provide a theoretical and experimental basis for the design and construction of UHPC wet bonded with BFRP reinforcement engineering. Due to the form and distribution direction of steel fiber, a mechanical occluding effect will be generated at the BFRP mesh, so these two factors are very valuable for this wet bonding research field, for which the related work needs to further proceed.

Investigating the Retrofitting Effect of Fiber-Reinforced Plastic and Steel Mesh Casting on Unreinforced Masonry Walls.

Unreinforced masonry (URM) is one of the most popular construction materials around the world, but vulnerable during earthquakes. Due to its brittle nature, the URM structures may lead to a possible collapse of the wall of a building during earthquake events causing casualties. In the current research, an attempt is made to enhance the seismic capacity of URM structures by proposing a new innovative composite material that can improve the shear strength and deformation capacity of the URM wall systems. The results revealed that the fiber-reinforced plastic having high tensile and shear stiffness can significantly increase in-plane as well as out-of-plane bending strength of the URM wall. It was recorded that the bending moment of the prism increased up to 549.5% by increasing the bending moment from 490 N*mm to 3183 N*mm per mm deflection of prism upon using glass fibers. Moreover, the ductility ratio amplified up to 5.73 times while the stiffness ratio increased up to 4.16 times with the aid of glass fibers. Since the material used in this research work is low cost, easily available, and no need for any skilled labor, which is economically good. Therefore, the URM walls retrofitted with fiber-reinforced plastic is an economical solution.

Flexural Behavior of Concrete Beams Reinforced with Recycled Plastic Mesh

The production of plastic material continues to increase around the world. Consequently, large amount of waste plastic is generated. This will lead to environmental concern due to its disposal. In order to reduce the environment effects and cost, waste plastic can be recycled and utilized in other applications including construction. This paper investigated the flexural behavior of non-structural concrete beams containing waste plastic meshes as a replacement of traditional steel reinforcement. To achieve this objective, beams with steel reinforcing bars and waste plastic sheets with different effective widths and patterns were prepared. After 28 days of curing, the beams were subjected to an increasing load until failure and the central deflection was measured at each load increment. Furthermore, a numerical analysis was performed on the specimens using ABAQUS software. This will allow the comparison between the experimental and numerical results. The experimental data indicated that using plastic sheets improved the flexural toughness and ductility of concrete beams. Additionally, correlations were carried out between the ultimate capacity of the beams, the flexural toughness and the effective width of the plastic meshes. As the effective mesh width increased, the flexural toughness and ultimate capacity of the concrete beams increased. The results of this investigation will allow greater utilization of waste plastic in construction activities.

Evaluation of citrus grove floor management strategies for water use efficiency and conservation

Perennial crops require water year-round, straining water resources, particularly in arid and semi-arid regions throught the world. Of those regions, the Lower Rio Grande Valley of Texas, USA, depends on flood irrigation to meet water demands of crops. Approximately 60–70% of citrus producers use flood irrigation to irrigate their groves, which is less efficient than other irrigation methods such as micro-jet or drip irrigation. Flood irrigation is to reduce cost, equipment, and energy required, and no land needs to be taken out of production to be used for holding ponds. Therefore, conservation practices that are adapted for flood irrigation are necessary in these areas where infrastructure is less conducive to other practices. Water use efficiency and potential water savings in different grove-floor management strategies, citrus tree growth, soil moisture, and irrigation volume were measured over the course of 3 years (from establishment to first harvest) in four different grove floor management strategies. These strategies, flat-bed no plastic mesh groundcover (traditional), flat-bed with plastic mesh groundcover, raised bed no groundcover, and raised bed with groundcover showed varying impacts on young citrus tree growth, soil moisture, and water savings over this study period. By the end of the study, 2.2% water savings (44,403 L over 4 years) were found in the flat bed with groundcover treatment compared to traditional grove floor management. This treatment also resulted in higher water use efficiency and greater initial growth of young citrus. Overall, the use of ground cover showed much potential for conserving water compared to traditional, uncovered flat bed management methods. These grove floor management practices can improve tree growth and establishment in young citrus trees in addition to improving water use efficiency. However, it is yet to see how these benefits will translate to more mature trees.

New Nanofiber Composition for Multiscale Bubble Capture and Separation.

Bubble dynamics inside a liquid medium and its interactions with hydrophobic and hydrophilic surfaces are crucial for many industrial processes. Electrospinning of polymers has emerged as a promising fabrication technique capable of producing a wide variety of hydrophobic and hydrophilic polymer nanofibers and membranes at a low cost. Thus, knowledge about the bubble interactions on electrospun hydrophobic and hydrophilic nanofibers can be utilized for capturing; separating; and transporting macro-, micro-, and nanobubbles. In this study, poly(methyl methacrylate) (PMMA) and PMMA-poly(ethylene glycol) (PEG) electrospun nanofibers were fabricated to investigate gas bubble interactions with submerged nanofiber mats. To improve their durability, the nanofibers were reinforced with a plastic mesh. The ultimate tensile strengths of PMMA and PMMA-30%PEG nanofibers were measured as 0.35 and 0.30 MPa, respectively. With the use of reinforcement mesh, the mechanical properties of final membranes could be improved by a factor of 70. The gas permeability of the electrospun and reinforced nanofibers was also studied using the high-speed visualization technique and a homemade setup to investigate the effect of electrospun nanofibers on the bubble coalescence and size in addition to the frequency of released bubbles from the nanofiber mat. The diffusion rate of air bubbles in hydrophobic PMMA electrospun nanofibers was measured as 10 L/s for each square meter of the nanofiber. However, the PMMA-30%PEG mat was able to restrict the diffusion of gas bubbles through its pores owing to the van der Waals force between the water molecules and nanofiber surface as well as the high stability of the thin water layer. It has been shown that the hydrophobic electrospun nanofibers can capture and coalesce the rising gas bubbles and release them with predictable size and frequency. Consequently, the diameter of bubbles introduced to the hydrophobic PMMA membrane ranged between 2 and 25 mm, whereas the diameter of bubbles released from the hydrophobic electrospun nanofibers was measured as 8 ± 1 mm. The proposed mechanism and fabricated electrospun nanofibers can enhance the efficiency of various systems such as heat exchangers, liquid-gas separation filters, and direct air capture (DAC) systems.

34530 Pyogenic granulomatous formation due to transepithelial elimination of abdominal hernia mesh

Foreign body reactions occur when nonnative material is embedded into the body, with subsequent rejection of that material leading to granulomatous formation. Granulomatous responses to foreign material most often present with a sarcoidal or palisading arrangement. Pyogenic granulomatous formation is reported, albeit a rarer presenting sign. This is a case of an 80-year-old Caucasian woman who presented to an outpatient clinic with a 3-month history of indurated red-brown-purple papules coalescing into plaques with ulceration on her central abdomen. Within the exophytic friable lesions, cream-colored linear fibers were appreciated and were physically extracted with pressure. Prior to her presentation, she received 6 abdominal wall hernia repairs (3 with plastic mesh, 3 with biologic mesh). Concern for a Marjolin’s ulcer prompted a shave biopsy. The biopsy showed pyogenic granuloma with adjacent scar. A diagnosis of transepithelial elimination of her abdominal hernia mesh was made. Surgical debridement from her general surgeon was performed to remove the offending mesh. The patient tolerated the debridement well and has since undergone reepithelization of the area.

An ecological assessment of Australia's first community oyster gardens

SummaryOyster gardening is a community‐driven activity where oysters are grown in cages hanging off docks or other coastal infrastructure. Besides the provision of adult oysters for restoration programmes, oyster gardening may also support other ecosystem services such as providing habitat for fishes and invertebrates as well as encouraging community involvement and citizen science. Australia's first oyster gardening programme was undertaken in a canal estate on Bribie Island in Moreton Bay, Queensland between October 2016 and November 2017. Oyster gardens consisting of plastic mesh cages were deployed with either three species of bivalves (polyculture), or exclusively Sydney Rock Oysters (monoculture) to investigate whether the habitat value differed between the two garden types. After one year of growth, polyculture cages supported higher abundances and species richness of both invertebrates and fish compared to the monoculture gardens. Our study showed that oyster gardening can provide habitat for a range of invertebrate and fish species in the highly modified coastal environment of a canal estate. Further studies are needed to discern whether these oyster gardens would also support larger and mobile fauna, such as species with commercial and recreational importance.

Evaluating biodegradable alternatives to plastic mesh for small‐scale oyster reef restoration

Polyethylene plastic mesh is commonly used for containing oyster shells in small‐scale oyster reef restoration, but environmental and public health concerns have prompted investigations of biodegradable alternatives. Shallow (<0.5 m) and deep (approximately 1 m) oyster reefs (approximately 6 m2) were constructed in the Mission‐Aransas Estuary, Texas, U.S.A., in March 2020 using recycled oyster shells placed into four different replicated mesh bag types: polyethylene (plastic) and three biodegradable alternatives (cellulose, cotton, and jute). Biodegradable alternatives (cellulose, cotton, and jute) all completely degraded within 2 months of deployment, leaving piles of loose shell, while polyethylene bags remained intact. Despite rapid degradation, the biodegradable/loose shell successfully recruited and developed larger oysters (mean of 46 mm) than on the polyethylene‐bagged shell (mean of 40 mm) after 7 months, although at less than half the density. Associated motile fauna density in the bagged shell was 2.4 times higher than in the loose shell after 7 months at both the deep and shallow locations. Faunal community composition and diversity varied more with reef depth than by bag type. The total cost of using polyethylene bags was lower than for biodegradable alternatives (22–45% the cost of cellulose, 35–72% the cost of jute, 49–99% the cost of cotton). However, because our estimate of the environmental cost of polyethylene plastic mesh only included impacts on marine natural capital, the true cost is likely much higher. Despite higher costs, biodegradable alternatives can still be successful for use in small‐scale oyster restoration events without introducing plastics into the marine environment.

EXPERIMENTAL REASONING ALLOPLASTY OF COMPLICATED HERNIA

Hernia of abdominal wall found in 10% of the adult population and take 3-4 place in the structure of surgical diseases. Each year, on the planet performed over 20 million operations of hernia, which is 10-15% of all interventions. For plastic hernias of the abdominal wall during 1 year used 1 million synthetic fishing nets. In Ukraine, about 13 thousand operations performed on strangulated hernias of the abdominal wall when there is inflammatory exudate, infection in the wound.
 Purpose. In the experiment to prove the applicability of polypropylene mesh for hernioplasty in cases of infection, phlegmon of hernia sac.
 Materials and methods. The experimental research was conducted on 150 white male rats breed "Wistar" weighing 250-300 g, same age, without disease, detained in accordance with generally accepted standards, at least 10 days before the experiment. In carrying out the experiment followed the major domestic and international standards according to national "general ethical principles of animal experimentation" (Ukraine, 2001).
 The open question of herniology is possibility of surgical treatment of hernia defect of abdominal wall at the hurt hernia, infecting of wound, phlegmon of hernia. For the study of problem, in an experiment on 150 white rats with the phlegmon of hernia complex research of features of flow of reparative process on an area the allogernioplastic polypropilene net of Linteks esfil is executed. The rats were divided into 3 groups: 1-st group – the plastic arts of hernia by the net of polypropylene of Linteks esfil standard; 2 group – the plastic arts by the net of Linteks esfil easy; 3 group – the plastic arts by the net of Linteks esfil heavy. The opened sore was washed by 0,02% solution of Decasan, Оctenisept farblos (Germany), intramuscular entered 1 ml of Imunophan, Ceftriaxon during a week. A positive dynamics was marked toward diminishing of contamination by microorganisms to 7 days after an operation. There were inflammatory changes in three groups: it was swollen hyperemia of tissues, serous-hemorrhagic excretions from a wound. On the 14th days reticulated implant was densely fixed to the muscles and was in the thin layer of connecting fabric with more mature granulation fabric. In 21 day reticulated implant surrounded connective capsule which consisted of well-organized collagen fibres with the insignificant external signs of inflammation. 
 The results of experimental researches confirm possibility of application of reticulated implant for the plastic arts of hernia defect in the phase of inflammation which more frequent meets at the hurt hernia. At presence of festerings excretions in hernia, the use of polypropilene net for the plastic arts must be accompanied careful rehabilitation of wound, abdominal region with adequate antibacterial therapy.
 Conclusions:
 
 The reaction of tissue to implant mesh matches with reaction of tissue bordering to necrotic cells, and the presence of an infected hernia does not worsen the conditions of integration polypropylene implant with tissues.
 Strengthening mesh in tissues observed at 21 day, and the most pronounced effects of fixation - on 90 days after alloplastic hernioplasty of the hernia defect.
 The results of experimental researches confirm the possibility of using plastic mesh implants for hernia defect in phase of inflammation that often occurs in strangulated hernia.