Plasmid SCP1 Research Articles

Modeling the architecture of the regulatory system controlling methylenomycin production in Streptomyces coelicolor

BackgroundThe antibiotic methylenomycin A is produced naturally by Streptomyces coelicolor A3(2), a model organism for streptomycetes. This compound is of particular interest to synthetic biologists because all of the associated biosynthetic, regulatory and resistance genes are located on a single cluster on the SCP1 plasmid, making the entire module easily transferable between different bacterial strains. Understanding further the regulation and biosynthesis of the methylenomycin producing gene cluster could assist in the identification of motifs that can be exploited in synthetic regulatory systems for the rational engineering of novel natural products and antibiotics.ResultsWe identify and validate a plausible architecture for the regulatory system controlling methylenomycin production in S. coelicolor using mathematical modeling approaches. Model selection via an approximate Bayesian computation (ABC) approach identifies three candidate model architectures that are most likely to produce the available experimental data, from a set of 48 possible candidates. Subsequent global optimization of the parameters of these model architectures identifies a single model that most accurately reproduces the dynamical response of the system, as captured by time series data on methylenomycin production. Further analyses of variants of this model architecture that capture the effects of gene knockouts also reproduce qualitative experimental results observed in mutant S. coelicolor strains.ConclusionsThe mechanistic mathematical model developed in this study recapitulates current biological knowledge of the regulation and biosynthesis of the methylenomycin producing gene cluster, and can be used in future studies to make testable predictions and formulate experiments to further improve our understanding of this complex regulatory system.

Telomere-associated proteins add deoxynucleotides to terminal proteins during replication of the telomeres of linear chromosomes and plasmids in Streptomyces.

Typical telomeres of linear chromosomes and plasmids of soil bacteria Streptomyces consist of tightly packed palindromic sequences with a terminal protein (‘TP’) covalently attached to the 5′ end of the DNA. Replication of these linear replicons is initiated internally and proceeds bidirectionally toward the telomeres, which leaves single-strand overhangs at the 3′ ends. These overhangs are filled by DNA synthesis using the TPs as the primers (‘end patching’). The gene encoding for typical TP, tpg, forms an operon with tap, encoding an essential telomere-associated protein, which binds TP and the secondary structures formed by the 3′ overhangs. Previously one of the two translesion synthesis DNA polymerases, DinB1 or DinB2, was proposed to catalyze the protein-primed synthesis. However, using an in vitro end-patching system, we discovered that Tpg and Tap alone could carry out the protein-primed synthesis to a length of 13 nt. Similarly, an ‘atypical’ terminal protein, Tpc, and its cognate telomere-associated protein, Tac, of SCP1 plasmid, were sufficient to achieve protein-primed synthesis in the absence of additional polymerase. These results indicate that these two telomere-associated proteins possess polymerase activities alone or in complex with the cognate TPs.

Three functional replication origins of the linear and artificially circularized plasmid SCP1 of Streptomyces coelicolor

Previous reports showed that the large linear plasmid SCP1 of Streptomyces coelicolor A3(2) contains a 5.4 kb centrally located replication locus. We report here that SCP1 actually contains three internal replication loci. Subcloning of the 5.4 kb sequence identified a 3.2 kb minimal locus (rep1A/repB/iteron) that determined propagation in Streptomyces lividans. The two newly identified replication genes, rep2A and rep3A, resembled the rep gene of Streptomyces circular plasmid pZL12. Transcription start points of the three replication genes were determined. The three replication loci could independently determine propagation in linear mode in S. lividans. Individual and sequential deletions of the rep1A and rep3A genes were successful. The SCP1-derived linear plasmids with deletions of the rep1A and/or rep3A genes still propagated in similar copy numbers, were inherited largely stable and were transferred efficiently by conjugation in S. coelicolor. Interestingly, SCP1 can be artificially circularized to yield a 280 kb circular plasmid, circular SCP-1 (C-SCP1), which contains the three replication loci. Strikingly, the copy numbers, inheritance and transfer of C-SCP1 resembled that of the linear SCP1 plasmids. Transcripts of the rep1A, rep2A and rep3A genes in linear or artificially circularized SCP1 were detected at all the time points of strain growth.

The tyrosine recombinase MrpA and its target sequence: a mutational analysis of the recombination site mrpS resulting in a new left element/right element (LE/RE) deletion system

MrpA is the multimer resolution protein of the Streptomyces coelicolor A3(2) plasmid SCP2*. Previously, MrpA was found to be a site-specific tyrosine recombinase that acts with the 36-bp recombination site mrpS. The present report gives a comprehensive characterization of the composition as well as the position of the spacer and MrpA binding sites within mrpS. Experiments revealed a spacer consisting of 6 remarkably variable nucleotides in the middle of the mrpS-site. A reduction in the spacer to 5 nucleotides abolished recombination. Investigation of the MrpA binding sites showed the importance of its 15 nucleotides on an effective recombination. Among almost randomly exchangeable nucleotides, two nucleotides were identified as essential for MrpA binding. Alteration of either of these nucleotides led to a reduction in MrpA binding down to 2% or even to no binding. Based on these results, a new left element/right element (LE/RE) deletion system was developed. The constructed heteromeric mrpS-sites are efficiently resolved by MrpA. The resulting double mutated (LE/RE) site can no longer be used as a recombination site by MrpA. The system has been successfully applied for the generation of multiple-targeted deletions in the genome of E. coli.

Characterization of the multiple CRISPR loci on <italic>Streptomyces</italic> linear plasmid pSHK1

The complete nucleotide sequence including the novel telomere sequence of Streptomyces linear plasmid pSHK1 consists of 187,263-bp, 158 genes, in which 51 genes resemble those of the linear plasmid SCP1 of Streptomyces coelicolor A3(2), and 20 genes encode transposases. Strikingly, the repetitive CRISPRs (clustered regularly interspaced short palindromic repeats) and cas (CRISPR-associated) genes were found, including a cluster of eight cas genes, in the order cas2B-cas1B-cas3B-cas5-cas4-cas2A-cas1A-cas3A, bracketed by a pair of divergent CRISPRs, and five other dispersed CRISPRs. The cas2B-cas1B-cas3B-cas5 or cas4-cas2A-cas1A genes were co-transcribed. Protein-protein interactions between Cas5 and Cas1A, 2A, 2B, 3B were detected by yeast two-hybrids, indicating a critical role of Cas5 for the formation of protein complexes. By polymerase chain reaction and Southern hybridization, 12 cas4 genes including three on linear plasmids were found among 75 newly isolated Streptomyces strains. The paired-CRISPRs and bracketed cas were also conserved in several other Streptomyces or actinomycete species. However, unlike other bacteria, the CRISPRs-cas in pSHK1 could not provide immunity against introduction of phage ΦC31 and plasmid containing the particular spacers in Streptomyces.

Characterization of the tyrosine recombinase MrpA encoded by the Streptomyces coelicolor A3(2) plasmid SCP2*

MrpA is the multimer resolution protein of the Streptomyces coelicolor A3(2) plasmid SCP2*. Previously, MrpA was found to significantly increase the stability of SCP2*-derived plasmids in Streptomyces lividans. The present report gives a functional characterization of MrpA. A sequence alignment revealed that MrpA shares highly conserved residues with members of the tyrosine recombinase family. After overexpression and Strep-tag purification, a DNase I footprint analysis and a gel mobility shift assay allowed for the identification of the 36-bp MrpA binding site mrpS. The mrpS site shows the configuration typical for tyrosine recombinases and contains two MrpA binding sites. The activity of MrpA was explored in vivo in E. coli cells and in vitro using purified MrpA. Depending on the position and orientation of the mrpS sites, three activities were detected: integration, resolution, and inversion. No accessory sites or proteins were required. Substitution of the conserved tyrosine (Y354F) by site-directed mutagenesis resulted in a complete loss of recombination activity but it still allowed the binding of MrpA to mrpS. The results define MrpA as a new site-specific tyrosine recombinase that acts with mrpS. In addition, we suggest that Y354 provides the nucleophile for DNA cleavage during recombination.

Linear Streptomyces plasmids form superhelical circles through interactions between their terminal proteins

Linear chromosomes and linear plasmids of Streptomyces possess covalently bound terminal proteins (TPs) at the 5′ ends of their telomeres. These TPs are proposed to act as primers for DNA synthesis that patches the single-stranded gaps at the 3′ ends during replication. Most (‘archetypal’) Streptomyces TPs (designated Tpg) are highly conserved in size and sequence. In addition, there are a number of atypical TPs with heterologous sequences and sizes, one of which is Tpc that caps SCP1 plasmid of Streptomyces coelicolor. Interactions between the TPs on the linear Streptomyces replicons have been suggested by electrophoretic behaviors of TP-capped DNA and circular genetic maps of Streptomyces chromosomes. Using chemical cross-linking, we demonstrated intramolecular and intermolecular interactions in vivo between Tpgs, between Tpcs and between Tpg and Tpc. Interactions between the chromosomal and plasmid telomeres were also detected in vivo. The intramolecular telomere interactions produced negative superhelicity in the linear DNA, which was relaxed by topoisomerase I. Such intramolecular association between the TPs poses a post-replicational complication in the formation of a pseudo-dimeric structure that requires resolution by exchanging TPs or DNA.

2-Alkyl-4-hydroxymethylfuran-3-carboxylic acids, antibiotic production inducers discovered by Streptomyces coelicolor genome mining

All of the genetic elements necessary for the production of the antibiotic methylenomycin (Mm) and its regulation are contained within the 22-kb mmy-mmf gene cluster, which is located on the 356-kb linear plasmid SCP1 of Streptomyces coelicolor A3(2). A putative operon of 3 genes within this gene cluster, mmfLHP, was proposed to direct the biosynthesis of an A-factor-like signaling molecule, which could play a role in the regulation of Mm biosynthesis. The mmfLHP operon was expressed under the control of its native promoter in S. coelicolor M512, a host lacking the SCP1 plasmid, and the ability to produce prodiginine and actinorhodin antibiotics. Comparative metabolic profiling led to the identification and structure elucidation of a family of 5 new 2-alkyl-4-hydroxymethylfuran-3-carboxylic acids (AHFCAs), collectively termed Mm furans (MMFs), as the products of the mmfLHP genes. MMFs specifically induce the production of the Mm antibiotics in S. coelicolor. Comparative genomics analyses and searches of the natural product chemistry literature indicated that other streptomycetes may produce AHFCAs, suggesting that they could form a general class of antibiotic biosynthesis inducers in Streptomyces species, with analogous functions to the better known gamma-butyrolactone regulatory molecules.

Characterization of Replication and Conjugation of Streptomyces Circular Plasmids pFP1 and pFP11 and Their Ability To Propagate in Linear Mode with Artificially Attached Telomeres

Many Streptomyces species harbor circular plasmids (8 to 31 kb) as well as linear plasmids (12 to 1,700 kb). We report the characterization of two newly detected circular plasmids, pFP11 (35,139 bp) and pFP1 (39,360 bp). As on linear plasmids, their replication loci comprise repA genes and adjacent iterons, to which RepA proteins bind specifically in vitro. Plasmids containing the minimal iterons plus the repA locus of pFP11 were inherited extremely unstably; par and additional loci were required for stable inheritance. Surprisingly, plasmids containing replication loci from pFP11 or Streptomyces circular plasmid SCP2 but not from pFP1, SLP1, or pIJ101 propagated in a stable linear mode when the telomeres of a linear plasmid were attached. These results indicate bidirectional replication for pFP11 and SCP2. Both pFP11 and pFP1 contain, for plasmid transfer, a major functional traB gene (encoding a DNA translocase typical for Streptomyces plasmids) as well as, surprisingly, a putative traA gene (encoding a DNA nickase, characteristic of single-stranded DNA transfer of gram-negative plasmids), but this did not appear to be functional, at least in isolation.

The telomere system of the Streptomyces linear plasmid SCP1 represents a novel class

Linear plasmids and chromosomes of Streptomyces carry terminal proteins (TPs) covalently attached to the 5' ends of the DNA. Most known telomeres are conserved in primary sequence and in the potential secondary structures formed during replication. The TP that caps these telomeres is also highly conserved and its coding gene, tpg, is present in all Streptomyces chromosomes and some linear plasmids. Linear plasmid SCP1 contains atypical telomere sequences and no tpg homologue, and can replicate in the absence of tpg, suggesting that it carries a novel TP gene. To isolate the TP on the SCP1 telomeres, we constructed a multicopy mini-SCP1 plasmid. The TP capping the plasmid was isolated and subjected to tryptic digestion and mass spectrometric analysis, and the results indicated that the TP was encoded by an open reading frame (ORF), SCP1.127 (tpc), on SCP1. Of the two ORFs upstream of tpc, SCP1.125 (tac) but not SCP1.126 was essential for replication of mini-SCP1. The Tac-Tpc system of SCP1 represents a convergently evolved novel telomere-capping system of Streptomyces linear replicons.

Evidence That the Streptomyces Developmental Protein WhiD, a Member of the WhiB Family, Binds a [4Fe-4S] Cluster

WhiD is required for the late stages of sporulation in the Gram-positive bacterium Streptomyces coelicolor. WhiD is a member of the WhiB-like family of putative transcription factors that are present throughout the actinomycetes but absent from other organisms. This family of proteins has four near-invariant cysteines, suggesting that these residues might act as ligands for a metal cofactor. Overexpressed WhiD, purified from Escherichia coli, contained substoichiometric amounts of iron and had an absorption spectrum characteristic of a [2Fe-2S] cluster. After Fe-S cluster reconstitution under anaerobic conditions, WhiD contained approximately 4 iron atoms/monomer and similar amounts of sulfide ion and gave an absorption spectrum characteristic of a [4Fe-4S] cluster. Reconstituted WhiD gave no electron paramagnetic resonance signal as prepared but, after reduction with dithionite, gave an electron paramagnetic resonance signal (g approximately 2.06, 1.94) consistent with a one-electron reduction of a [4Fe-4S](2+) cluster to a [4Fe-4S](1+) state with electron spin of S = (1/2). The anaerobically reconstituted [4Fe-4S] cluster was oxygen sensitive. Upon exposure to air, absorption at 410 and 505 nm first increased and then showed a steady decrease with time until the protein was colorless in the near UV/visible region. These changes are consistent with an oxygen-induced change from a [4Fe-4S] to a [2Fe-2S] cluster, followed by complete loss of cluster from the protein. Each of the four conserved cysteine residues, Cys-23, -53, -56, and -62, was essential for WhiD function in vivo.

Two chimeric chromosomes of Streptomyces coelicolor A3(2) generated by single crossover of the wild-type chromosome and linear plasmid scp1.

Streptomyces coelicolor A3(2) strain 2106 carries a 1.85-Mb linear plasmid, SCP1'-cysD, in addition to a 7.2-Mb linear chromosome. Macrorestriction analysis indicated that both linear DNAs are hybrids of the wild-type chromosome and the linear plasmid SCP1 on each side. Nucleotide sequencing of the fusion junctions revealed no homology between the recombination regions. SCP1'-cysD contains an SCP1 telomere and a chromosomal telomere at each end and therefore does not have terminal inverted repeats. In addition, SCP1'-cysD could not be eliminated from strain 2106 by various mutagenic treatments. Thus, we concluded that both the 7.2-Mb chromosome and SCP1'-cysD are chimeric chromosomes generated by a single crossover of the wild-type chromosome and SCP1. This may be regarded as a model of chromosomal duplication in genome evolution.

SCP1, a 356,023 bp linear plasmid adapted to the ecology and developmental biology of its host, Streptomyces coelicolor A3(2).

The sequencing of the entire genetic complement of Streptomyces coelicolor A3(2) has been completed with the determination of the 365,023 bp sequence of the linear plasmid SCP1. Remarkably, the functional distribution of SCP1 genes somewhat resembles that of the chromosome: predicted gene products/functions include ECF sigma factors, antibiotic biosynthesis, a gamma-butyrolactone signalling system, members of the actinomycete-specific Wbl class of regulatory proteins and 14 secreted proteins. Some of these genes are among the 18 that contain a TTA codon, making them targets for the developmentally important tRNA encoded by the bldA gene. RNA analysis and gene fusions showed that one of the TTA-containing genes is part of a large bldA-dependent operon, the gene products of which include three proteins isolated from the spore surface by detergent washing (SapC, D and E), and several probable metabolic enzymes. SCP1 shows much evidence of recombinational interactions with other replicons and transposable elements during its history. For example, it has two sets of partitioning genes (which may explain why an integrated copy of SCP1 partially suppressed the defective partitioning of a parAB-deleted chromosome during sporulation). SCP1 carries a cluster of probable transfer determinants and genes encoding likely DNA polymerase III subunits, but it lacks an obvious candidate gene for the terminal protein associated with its ends. This may be related to atypical features of its end sequences.

Streptomyces coelicolor A3(2) plasmid SCP2*: deductions from the complete sequence.

Plasmid SCP2* is a 31 kb, circular, low-copy-number plasmid originally identified in Streptomyces coelicolor A3(2) as a fertility factor. The plasmid was completely sequenced. The analysis of the 31 317 bp sequence revealed 34 ORFs encoding putative proteins from 31 to 710 aa long, most of them lacking similarity to known proteins. Three functional regions had been identified previously: the replication region, the transfer and spreading region, and the stability region. Three genes were identified in the stability region which contribute to the stability of SCP2 as shown by plasmid stability testing. The first gene, mrpA, encodes a new member of the lambda integrase family of site-specific recombinases. The two genes downstream of mrpA were called parA and parB. The gene product, ParA, shows similarity to a family of ATPases involved in plasmid partition. An increase of plasmid stability could be seen only when both genes were present. By deletion analysis, the replication region could be narrowed down to a 1.6 kb region, consisting of a 650 bp non-coding region and two genes, repI and repII, encoding proteins of 161 and 131 aa. Only RepI exhibits similarities to DNA binding elements and contains a putative helix-turn-helix motif. The traA gene that is essential for DNA transfer and pock formation was identified previously. Upstream of traA, 10 ORFs were found in the same orientation as traA which might be involved in conjugation and DNA spreading, together with one gene in the opposite orientation with similarities to transcriptional regulators of DNA transfer. Two transposable elements were found on SCP2*. IS1648 belongs to the IS3 family of insertion sequences. The second element, Tn5417, shows the highest similarity to the Tn4811 element located in the terminal inverted repeats of the Streptomyces lividans chromosome.

Plasmid transfer from Streptomyces to Mycobacterium smegmatis by spontaneous transformation.

Hybrids of the Streptomyces coelicolor conjugative plasmid SCP2* and the Mycobacterium plasmid pAL5000 were transferred from Streptomyces coelicolor or Streptomyces lividans to Mycobacterium smegmatis mc2155 in plate crosses. Inactivation of the SCP2* transfer function did not prevent or reduce plasmid transfer. This transfer was DNase I sensitive and thus involved release of DNA from Streptomyces, followed by transformation of M. smegmatis. M. smegmatis growing on specific solid media was also transformed by pure CCC and linear plasmid DNA. Small plasmids were taken up intact but large plasmids suffered deletions. Competence developed within 24 h of incubation at 30 degrees C or 37 degrees C, and up to 400 transformants were obtained per microg of CCC plasmid DNA. Transformation frequencies were higher when M. smegmatis was co-cultivated with plasmid-free Streptomyces, but unaffected by resident homologous sequences or inactivation of recA in M. smegmatis. Spontaneous transformation was also observed with a circular Streptomyces transposable element which inserted into chromosomal sites. Transformative plasmid transfer was also shown to occur between M. smegmatis strains. This is the first report of non-artificially induced, spontaneous plasmid transformation in Mycobacterium.

Integrated structures of the linear plasmid SCP1 in two bidirectional donor strains of Streptomyces coelicolor A3(2)

The linear plasmid SCP1 is integrated into the central region of the chromosome of Streptomyces coelicolor A3(2). The integrated structures of SCP1 in two bidirectional donor strains, 2612 and A634, were analyzed by cloning and sequencing of the junctions between the SCP1 DNA and the chromosomal DNA. In the NF (normal fertility) strain 2612, SCP1 is integrated in a right-handed direction into ORF-X at the left end of the IS cluster in AseI fragment E. An almost intact left end of SCP1 is retained, while the right terminal inverted repeat (TIR-R) of SCP1 and a 33-kb chromosomal DNA segment including the IS cluster are deleted. In the NF-like strain A634, SCPI is also integrated into AseI fragment E in a left-handed direction. The left junction is composed of IS466 with complete deletion of TIR-R of SCP1, and the right junction is located at the left end of IS468A* with half of TIR-L being deleted. During the integration event, a 5.4-kb chromosomal DNA segment including IS468A, IS468B, IS469 and IS466A was duplicated so that this sequence is now present on both sides of SCP1. Since 2612 and A634 exhibit a similar bidirectional gradient of gene transfer, it is surprising that their chromosomal structures are so different.

The terminal inverted repeats of the linear plasmid SCP1 of Streptomyces coelicolor A3(2) possess a truncated copy of the transposon Tn4811 of Streptomyces lividans 66.

Streptomyces coelicolor A3(2), the best genetically studied streptomycete and Streptomyces lividans 66 are very closely related strains. This is further emphasized by our finding that a truncated copy of Tn4811 of S. lividans is present in the terminal inverted repeats of the S. coelicolor giant linear plasmid SCP1. The copy of Tn4811 in SCP1 lacks the first 1276 bp and shows only minor changes in the nucleotide sequence of the remaining 4.12 kb. Tn4811 exists in both ends of SCP1.

AUD4, a new amplifiable element from Streptomyces lividans.

After transformation of the Streptomyces lividans chloramphenicol-sensitive, arginine-auxotrophic mutant strain AJ100 with a derivative of plasmid SCP2, some of the regenerated protoplasts contained an 8.2 kb DNA sequence amplified to several hundred copies per chromosome. The corresponding non-amplified sequence, called AUD4, was isolated from a lambda phage genomic library of S. lividans 1326. Two cytosine residues were the only directly repeated nucleotides at the ends of the element, indicating that AUD4 is a class I amplifiable sequence. The element mapped in the AseI-D fragment of the S. lividans chromosome, where other class I amplifications have been described. The complete element was sequenced and 10 ORFs were identified. Some of the deduced proteins are highly conserved in other organisms but a putative function could be attributed to only a few of them. Duplication of AUD4 by integration of an Escherichia coli plasmid carrying various parts of AUD4 and a thiostrepton-resistance gene in S. lividans AJ100, ZX7 or TK64 induced amplification of the integrated plasmid, AUD4 or both at high frequency.

The Linear Plasmid SCP1 of Streptomyces coelicolor A3(2) Possesses a Centrally Located Replication Origin and Shows Significant Homology to the Transposon Tn4811

The linear plasmid SCP1 of Streptomyces coelicolor A3(2) is one of the genetically more studied linear streptomycete replicons. Although the genetics of SCP1 and its interaction with the host chromosome have been analyzed for nearly three decades no information exists on its replication. With the help of an ordered cosmid contig for the complete 360-kb element, we have localized a 5439-bp fragment from the central region that confers autonomous replication in Streptomyces lividans. The minimal origin contains two overlapping ORFs which are separated from an AT-rich region which might correspond to the replication start point. ORF1 revealed intensive similarity to a class of DNA-primase/helicases of actinophages and archael plasmids. In addition, we have identified a region in both terminal inverted repeats of SCP1 that shows significant homology to the transposable element Tn4811 located near the ends of the S. lividans 66 chromosome.

Cloning and physical mapping of the EcoRI fragments of the giant linear plasmid SCP1.

A cosmid library was constructed for the 350-kb giant linear plasmid SCP1 and aligned on a successive linear map. Only a 0.8-kb gap has remained uncloned in the terminal inverted repeats close to both ends. Partial digestion of the aligned cosmids with EcoRI and hybridization with the flanking fragments of the vector enabled physical mapping of all of the EcoRI fragments. On this map, the methylenomycin biosynthetic gene cluster, the insertion sequence IS466, and the sapCDE genes coding for spore-associated proteins were localized.