Plasmid-based Expression System Research Articles

Molecular modification and food-grade system construction for protein-glutaminase production in Bacillus subtilis

Protein-glutaminase (PG) is an enzyme used to enhance the functional properties of food proteins, such as emulsification, solubility and foaming. However, the use of PG in the food industry is limited because of its low catalytic activity and expression levels. In this study, a mutant library of PG was systematically constructed and screened through a structure-guided semi-rational design. This resulted in the identification of a mutant strain, A291S, which exhibited a 45.71% increase in activity. Moreover, a food-grade expression system for PG was established in Bacillus subtilis, demonstrating PG expression levels comparable to those obtained using plasmid-based expression systems that utilized antibiotics. The activity of PG remained above 99% even after the plates were incubated at ambient temperature for 5 days. However, the antibiotic-based expression system retained only 36% of PG activity. The efficacy of fed-batch fermentation for PG production was also evaluated and a maximum activity of 8.15 U/mL was obtained. These findings highlight the significance of PG modification and potential applications of the food-grade expression system in the food industry.

Generation of Recombinant Snakehead Rhabdovirus (SHRV) Expressing Artificial MicroRNA Targeting Spring Viremia of Carp Virus (SVCV) P Gene and In Vivo Therapeutic Use Against SVCV Infection.

Spring viremia of carp virus (SVCV) is a highly lethal virus in common carp (Cyprinus carpio) and other cyprinid fish species. The aim of the present study was to develop an in vivo therapeutic measure against SVCV using artificial microRNA (AmiRNA) targeting the SVCV P gene transcript. Three candidates of AmiRNAs (AmiR-P1, -P2, and -P3) were selected, and their ability to downregulate SVCV P gene transcript was analyzed by both synthesized AmiRNA mimics and AmiRNA-expressing vector system, in which AmiR-P3 showed the strongest inhibitory activity among the three candidates. To overcome in vivo limitation of miRNA mimics or plasmid-based miRNA expression systems, we rescued recombinant snakehead rhabdoviruses (SHRVs) expressing SVCV P gene-targeting AmiRNA (rSHRV-AmiR-P3) or control AmiRNA (rSHRV-AmiR-C) using reverse genetic technology. The successful expression of AmiR-P3 and AmiR-C in cells infected with the rescued viruses was verified by quantitative PCR. To evaluate the availability of rSHRV-AmiR-P3 for in vivo control of SVCV, zebrafish (Danio rerio) were (i) infected with either rSHRV-AmiR-C or rSHRV-AmiR-P3 followed by SVCV infection or (ii) infected with SVCV followed by either rSHRV-AmiR-C or rSHRV-AmiR-P3 infection. Fish infected with rSHRVs before and after SVCV infection showed significantly higher survival rates than fish infected with SVCV alone. There was no significant difference in survival rates between groups of fish infected with rSHRV-AmiR-C and rSHRV-AmiR-P3 before SVCV infection; however, fish infected with SVCV followed by infection with rSHRV-AmiR-P3 showed significantly higher survival rates than fish infected with rSHRV-AmiR-C. These results suggest that rSHRV-AmiR-P3 has therapeutic potential against SVCV in fish when administered after SVCV infection, and rSHRVs expressing artificial microRNAs targeting SVCV transcripts could be used as a tool to control SVCV infection in fish for a therapeutic purpose.

Established and Emerging Methods for Protecting Linear DNA in Cell-Free Expression Systems

Cell-free protein synthesis (CFPS) is a method utilized for producing proteins without the limits of cell viability. The plug-and-play utility of CFPS is a key advantage over traditional plasmid-based expression systems and is foundational to the potential of this biotechnology. A key limitation of CFPS is the varying stability of DNA types, limiting the effectiveness of cell-free protein synthesis reactions. Researchers generally rely on plasmid DNA for its ability to support robust protein expression in vitro. However, the overhead required to clone, propagate, and purify plasmids reduces the potential of CFPS for rapid prototyping. While linear templates overcome the limits of plasmid DNA preparation, linear expression templates (LETs) were under-utilized due to their rapid degradation in extract based CFPS systems, limiting protein synthesis. To reach the potential of CFPS using LETs, researchers have made notable progress toward protection and stabilization of linear templates throughout the reaction. The current advancements range from modular solutions, such as supplementing nuclease inhibitors and genome engineering to produce strains lacking nuclease activity. Effective application of LET protection techniques improves expression yields of target proteins to match that of plasmid-based expression. The outcome of LET utilization in CFPS is rapid design-build-test-learn cycles to support synthetic biology applications. This review describes the various protection mechanisms for linear expression templates, methodological insights for implementation, and proposals for continued efforts that may further advance the field.

Gene Therapy for Regenerative Medicine.

The development of biological methods over the past decade has stimulated great interest in the possibility to regenerate human tissues. Advances in stem cell research, gene therapy, and tissue engineering have accelerated the technology in tissue and organ regeneration. However, despite significant progress in this area, there are still several technical issues that must be addressed, especially in the clinical use of gene therapy. The aims of gene therapy include utilising cells to produce a suitable protein, silencing over-producing proteins, and genetically modifying and repairing cell functions that may affect disease conditions. While most current gene therapy clinical trials are based on cell- and viral-mediated approaches, non-viral gene transfection agents are emerging as potentially safe and effective in the treatment of a wide variety of genetic and acquired diseases. Gene therapy based on viral vectors may induce pathogenicity and immunogenicity. Therefore, significant efforts are being invested in non-viral vectors to enhance their efficiency to a level comparable to the viral vector. Non-viral technologies consist of plasmid-based expression systems containing a gene encoding, a therapeutic protein, and synthetic gene delivery systems. One possible approach to enhance non-viral vector ability or to be an alternative to viral vectors would be to use tissue engineering technology for regenerative medicine therapy. This review provides a critical view of gene therapy with a major focus on the development of regenerative medicine technologies to control the in vivo location and function of administered genes.

Stable, efficient, and cost-effective system for the biosynthesis of recombinant bacterial cellulose in Escherichia coli DH5α platform

BackgroundOwing to its remarkable mechanical properties that surpass the plant-based cellulose, bacterial cellulose production has been targeted for commercialization during the last few years. However, the large-scale production of cellulose is generally limited by the slow growth of producing strains and low productivity which ultimately makes the commercial production of cellulose using the conventional strains non cost-effective. In this study, we developed a novel plasmid-based expression system for the biosynthesis of cellulose in E. coli DH5α and assessed the cellulose productivity relative to the typically used E. coli BL21 (DE) expression strain. ResultsNo production was detected in BL21 (DE3) cultures upon expression induction; however, cellulose was detected in E. coli DH5α as early as 1 h post-induction. The total yield in induced DH5α cultures was estimated as 200 ± 5.42 mg/L (dry weight) after 18 h induction, which surpassed the yield reported in previous studies and even the wild-type Gluconacetobacter xylinum BRC5 under the same conditions. As confirmed with electron microscope micrograph, E. coli DH5α produced dense cellulose fibers with ~ 10 μm diameter and 1000–3000 μm length, which were remarkably larger and more crystalline than that typically produced by G. hansenii. ConclusionsThis is the first report on the successful cellulose production in E. coli DH5α which is typically used for plasmid multiplication rather than protein expression, without the need to co-express cmcax and ccpAx regulator genes present in the wild-type genome upstream the bcs-operon, and reportedly essential for the biosynthesis.

Plasmid-Based Gene Expression Systems for Lactic Acid Bacteria: A Review.

Lactic acid bacteria (LAB) play a very vital role in food production, preservation, and as probiotic agents. Some of these species can colonize and survive longer in the gastrointestinal tract (GIT), where their presence is crucially helpful to promote human health. LAB has also been used as a safe and efficient incubator to produce proteins of interest. With the advent of genetic engineering, recombinant LAB have been effectively employed as vectors for delivering therapeutic molecules to mucosal tissues of the oral, nasal, and vaginal tracks and for shuttling therapeutics for diabetes, cancer, viral infections, and several gastrointestinal infections. The most important tool needed to develop genetically engineered LABs to produce proteins of interest is a plasmid-based gene expression system. To date, a handful of constitutive and inducible vectors for LAB have been developed, but their limited availability, host specificity, instability, and low carrying capacity have narrowed their spectrum of applications. The current review discusses the plasmid-based vectors that have been developed so far for LAB; their functionality, potency, and constraints; and further highlights the need for a new, more stable, and effective gene expression platform for LAB.

Prolonged control of insulin-dependent diabetes via intramuscular expression of plasmid-encoded single-strand insulin analogue

Daily insulin injection is necessary for the treatment of the insulin-dependent diabetes. However, the process is painful and inconvenient. Accordingly, we have made exploratory efforts to establish an alternative method for continuous insulin supply via intramuscular injection of a designed plasmid encoding the single-strand insulin analogue (SIA), which provides safe, effective and prolonged control of insulin-dependent diabetes. To generate a SIA, a short flexible peptide was alternatively introduced into the natural proinsulin to replace its original long and rigid C-peptide. Then, the synthetic promoter SP301 was used to drive potent and specific expression of SIA in skeletal muscle cells. By combining the Pluronic L64 and low-voltage electropulse (L/E), the specialized gene delivery technique was applied to efficiently transfer the constructed plasmid into skeletal muscle cells via intramuscular injection. Through these efforts, a plasmid-based intramuscular gene expression system was established and improved, making it applicable for gene therapy. The plasmid-expressed SIA showed biological functions that were similar to that of natural insulin. A single L/E-pSP301-SIA administration provided sustained SIA expression in vivo for about 1.5 months. In addition, the diabetic mice treated with L/E-pSP301-SIA were much healthier than those with other treatments. This plasmid-based system was safe for the treatment of diabetes and did not cause immune responses or pathological damage. The results confirmed that, in a mouse model, long-term positive effects were achieved by a single intramuscular L/E-pSP301-SIA injection, which consequently provided reliable experimental basis for its clinical application for the treatment of diabetes mellitus with promising prospects.

Methods for Markerless Gene Deletion and Plasmid-Based Expression in Sulfolobus acidocaldarius.

A well-functioninggenetic system, which is important for studying gene functions in vivo, requires a transformation method, a vector system and a selection system. Sulfolobus acidocaldarius is a crenarchaeal model organism that grows optimally at 75°C and a pH of 3. These extreme growth conditions cause some difficulties in developing a genetic system. With continuous efforts, versatile genetic tools have been developed for different species from the order of Sulfolobales. In this chapter, we describe the methods for the available genetic tools in S. acidocaldarius including a (1) transformation method, (2) pop in/pop out strategy to generate markerless deletion mutants and (3) a plasmid-based expression system.

Biosynthesis of phenylpyruvic acid from l‐phenylalanine using chromosomally engineered Escherichia coli

The efficiency of whole-cell biotransformation is often affected by the genetic instability of plasmid-based expression systems, which require selective pressure to maintain the stability of the plasmids. To circumvent this shortcoming, we constructed a chromosome engineering strain for the synthesis of phenylpyruvic acid (PPA) from l-phenylalanine. First, l-amino acid deaminase (pmLAAD) from Proteus myxofaciens was incorporated into Escherichia coli BL21 (DE3) chromosome and the copy numbers of pmLAAD were increased by chemically induced chromosomal evolution (CIChE). Fifty-nine copies of pmLAAD were obtained in E. coli BL8. The PPA titer of E. coli BL8 reached 2.22 g/L at 6 h. Furthermore, the deletion of lacI improved PPA production. In the absence of isopropyl-β-d-thiogalactopyranoside, the resulting strain, E. coli BL8△recA△lacI, produced 2.65 g/L PPA at 6 h and yielded a 19.37% increase in PPA production compared to E. coli BL8△recA. Finally, the engineered E. coli BL8△recA△lacI strain achieved 19.14 g/L PPA at 24 h in a 5-L bioreactor.

Integration of Genetic and Process Engineering for Optimized Rhamnolipid Production Using Pseudomonas putida.

Rhamnolipids are biosurfactants produced by microorganisms with the potential to replace synthetic compounds with petrochemical origin. To promote industrial use of rhamnolipids, recombinant rhamnolipid production from sugars needs to be intensified. Since this remains challenging, the aim of the presented research is to utilize a multidisciplinary approach to take a step toward developing a sustainable rhamnolipid production process. Here, we developed expression cassettes for stable integration of the rhamnolipid biosynthesis genes into the genome outperformed plasmid-based expression systems. Furthermore, the genetic stability of the production strain was improved by using an inducible promoter. To enhance rhamnolipid synthesis, energy- and/or carbon-consuming traits were removed: mutants negative for the synthesis of the flagellar machinery or the storage polymer PHA showed increased production by 50%. Variation of time of induction resulted in an 18% increase in titers. A scale-up from shake flasks was carried out using a 1-L bioreactor. By recycling of the foam, biomass loss could be minimized and a rhamnolipid titer of up to 1.5 g/L was achieved without using mechanical foam destroyers or antifoaming agents. Subsequent liquid–liquid extraction was optimized by using a suitable minimal medium during fermentation to reduce undesired interphase formation. A technical-scale production process was designed and evaluated by a life-cycle assessment (LCA). Different process chains and their specific environmental impact were examined. It was found that next to biomass supply, the fermentation had the biggest environmental impact. The present work underlines the need for multidisciplinary approaches to address the challenges associated with achieving sustainable production of microbial secondary metabolites. The results are discussed in the context of the challenges of microbial biosurfactant production using hydrophilic substrates on an industrial scale.

Identification and characterization of highly active promoters from the fall armyworm, Spodoptera frugiperda

The cell lines derived from the fall armyworm (FAW), Spodoptera frugiperda, have been widely used for production of recombinant proteins for applications in both basic research and applications in medicine and agriculture. Promoters from the nucleopolyhedrovirus (NPV) are commonly used in these expression systems. These promoters have some limitations, which may be overcome by using promoters of genes from S. frugiperda. However, information on these promoters is not available. We identified several highly expressed genes from the transcriptomes of S. frugiperda midgut, fat body, epidermis, ovarian cell line (Sf9), and a midgut cell line (Sf17). The activity of potential promoters of 21 highly expressed genes was evaluated in Sf9 and Sf17 cells. Two of these promoters, SfHSC70-P1780 and SfPub-P2009, showed higher activity than commonly used hr5/ie1 (baculovirus enhancer element, hr5 and immediate early gene 1, ie1) promoter. Interestingly, the activity of these two promoters increased after adding hr5 enhancer element. The hr5/SfPub-P2009 promoter performance was evaluated by expressing an exogenous P450 protein in Sf9 cells using a plasmid-based expression system. The activity of this promoter was also evaluated in the FAW by expressing green fluorescence protein using the baculovirus expression system. In both cases, the hr5/SfPub-P2009 promoter performed better than the commonly used hr5/ie1 promoter. These strong endogenous promoters will be useful for studies in S. frugiperda and other lepidopteran insects for multiple applications, including protein expression, genome editing, and transgenic insects.

Efficient production of myo-inositol in Escherichia coli through metabolic engineering

BackgroundThe biosynthesis of high value-added compounds using metabolically engineered strains has received wide attention in recent years. Myo-inositol (inositol), an important compound in the pharmaceutics, cosmetics and food industries, is usually produced from phytate via a harsh set of chemical reactions. Recombinant Escherichia coli strains have been constructed by metabolic engineering strategies to produce inositol, but with a low yield. The proper distribution of carbon flux between cell growth and inositol production is a major challenge for constructing an efficient inositol-synthesis pathway in bacteria. Construction of metabolically engineered E. coli strains with high stoichiometric yield of inositol is desirable.ResultsIn the present study, we designed an inositol-synthesis pathway from glucose with a theoretical stoichiometric yield of 1 mol inositol/mol glucose. Recombinant E. coli strains with high stoichiometric yield (> 0.7 mol inositol/mol glucose) were obtained. Inositol was successfully biosynthesized after introducing two crucial enzymes: inositol-3-phosphate synthase (IPS) from Trypanosoma brucei, and inositol monophosphatase (IMP) from E. coli. Based on starting strains E. coli BW25113 (wild-type) and SG104 (ΔptsG::glk, ΔgalR::zglf, ΔpoxB::acs), a series of engineered strains for inositol production was constructed by deleting the key genes pgi, pfkA and pykF. Plasmid-based expression systems for IPS and IMP were optimized, and expression of the gene zwf was regulated to enhance the stoichiometric yield of inositol. The highest stoichiometric yield (0.96 mol inositol/mol glucose) was achieved from recombinant strain R15 (SG104, Δpgi, Δpgm, and RBSL5-zwf). Strain R04 (SG104 and Δpgi) reached high-density in a 1-L fermenter when using glucose and glycerol as a mixed carbon source. In scaled-up fed-batch bioconversion in situ using strain R04, 0.82 mol inositol/mol glucose was produced within 23 h, corresponding to a titer of 106.3 g/L (590.5 mM) inositol.ConclusionsThe biosynthesis of inositol from glucose in recombinant E. coli was optimized by metabolic engineering strategies. The metabolically engineered E. coli strains represent a promising method for future inositol production. This study provides an essential reference to obtain a suitable distribution of carbon flux between glycolysis and inositol synthesis.

Escherichia coli \u03c370 promoters allow expression rate control at the cellular level in genome-integrated expression systems

BackgroundThe genome-integrated T7 expression system offers significant advantages, in terms of productivity and product quality, even when expressing the gene of interest (GOI) from a single copy. Compared to plasmid-based expression systems, this system does not incur a plasmid-mediated metabolic load, and it does not vary the dosage of the GOI during the production process. However, long-term production with T7 expression system leads to a rapidly growing non-producing population, because the T7 RNA polymerase (RNAP) is prone to mutations. The present study aimed to investigate whether two σ70 promoters, which were recognized by the Escherichia coli host RNAP, might be suitable in genome-integrated expression systems. We applied a promoter engineering strategy that allowed control of expressing the model protein, GFP, by introducing lac operators (lacO) into the constitutive T5 and A1 promoter sequences.ResultsWe showed that, in genome-integrated E. coli expression systems that used σ70 promoters, the number of lacO sites must be well balanced. Promoters containing three and two lacO sites exhibited low basal expression, but resulted in a complete stop in recombinant protein production in partially induced cultures. In contrast, expression systems regulated by a single lacO site and the lac repressor element, lacIQ, on the same chromosome caused very low basal expression, were highly efficient in recombinant protein production, and enables fine-tuning of gene expression levels on a cellular level.ConclusionsBased on our results, we hypothesized that this phenomenon was associated with the autoregulation of the lac repressor protein, LacI. We reasoned that the affinity of LacI for the lacO sites of the GOI must be lower than the affinity of LacI to the lacO sites of the endogenous lac operon; otherwise, LacI autoregulation could not take place, and the lack of LacI autoregulation would lead to a disturbance in lac repressor-mediated regulation of transcription. By exploiting the mechanism of LacI autoregulation, we created a novel E. coli expression system for use in recombinant protein production, synthetic biology, and metabolic engineering applications.

The Effects of Lactose Induction on a Plasmid-Free E. coli T7 Expression System.

Recombinant production of pharmaceutical proteins like antigen binding fragments (Fabs) in the commonly-used production host Escherichia coli presents several challenges. The predominantly-used plasmid-based expression systems exhibit the drawback of either excessive plasmid amplification or plasmid loss over prolonged cultivations. To improve production, efforts are made to establish plasmid-free expression, ensuring more stable process conditions. Another strategy to stabilize production processes is lactose induction, leading to increased soluble product formation and cell fitness, as shown in several studies performed with plasmid-based expression systems. Within this study we wanted to investigate lactose induction for a strain with a genome-integrated gene of interest for the first time. We found unusually high specific lactose uptake rates, which we could attribute to the low levels of lac-repressor protein that is usually encoded not only on the genome but additionally on pET plasmids. We further show that these unusually high lactose uptake rates are toxic to the cells, leading to increased cell leakiness and lysis. Finally, we demonstrate that in contrast to plasmid-based T7 expression systems, IPTG induction is beneficial for genome-integrated T7 expression systems concerning cell fitness and productivity.

Establishment and characterization of immortalized porcine neonatal hepatocytes without the use of viral components.

Porcine hepatocytes are a promising option for xenotransplantation in light of the critical shortage of orthotopic donor livers. Because primary hepatocytes have limited ability to proliferate in vitro, several immortalized hepatocyte lines have been established. However, these cells have typically been generated using a virus-dependent transfection methodology and express viral oncogenes that introduce potential risks in clinical applications. In our study, we established immortalized porcine neonatal hepatocytes by introduction of a plasmid-based hTERT gene expression system by electroporation, without the use of viral components. We detected stable expression of hTERT by RT-PCR and Western blot. The immortalized hepatocytes exhibit a high growth rate, but retain the normal morphology of freshly isolated primary hepatocytes. To date, these immortalized hepatocytes have been expanded for over 80 passages. In addition, no significant differences were detected in glycogen synthesis, secretion of serum albumin, or lipid accumulation between the primary hepatocytes and our immortalized hepatocytes. The cells also exhibit serum-dependent growth and have no capacity for anchorage-independent growth in vitro, demonstrating that they have not been transformed in vitro. Our immortalized porcine hepatocytes will be useful for elucidating the pathogenesis of liver disease and developing efficient treatments. Furthermore, these immortalized hepatocytes may provide a safer source of cells for application in xenotransplantation, compared with immortalized cells generated using viral components.

Biological Characterization of Conserved Residues within the Cytoplasmic Tail of the Pichinde Arenaviral Glycoprotein Subunit 2 (GP2).

Several mammarenaviruses can cause deadly hemorrhagic fever infections in humans, with limited preventative and therapeutic measures available. Arenavirus cell entry is mediated by the viral glycoprotein (GP) complex, which consists of the stable signal peptide (SSP), the receptor-binding subunit GP1, and the transmembrane subunit GP2. The GP2 cytoplasmic tail (CT) is relatively conserved among arenaviruses and is known to interact with the SSP to regulate GP processing and membrane fusion, but its biological role in the context of an infectious virus has not been fully characterized. Using a Pichinde virus (PICV) GP expression vector and a PICV reverse genetics system, we systematically characterized the functional roles of 12 conserved residues within the GP2 CT in GP processing, trafficking, assembly, and fusion, as well as in viral replication. Except for P478A and K505A R508A, alanine substitutions at conserved residues abolished GP processing and membrane fusion in plasmid-transfected cells. Six invariant H and C residues and W503 are essential for viral replication, as evidenced by the fact that their mutant viruses could not be rescued. Both P480A and R482A mutant viruses were rescued, grew similarly to wild-type (WT) virus, and produced evidently processed GP1 and GP2 subunits in virus-infected cells, despite the fact that the same mutations abolished GP processing and membrane fusion in a plasmid-based protein expression system, illustrating the importance of using an infectious-virus system for analyzing viral glycoprotein function. In summary, our results demonstrate an essential biological role of the GP2 CT in arenavirus replication and suggest it as a potential novel target for developing antivirals and/or attenuated viral vaccine candidates.IMPORTANCE Several arenaviruses, such as Lassa virus (LASV), can cause severe and lethal hemorrhagic fever diseases with high mortality and morbidity, for which no FDA-approved vaccines or therapeutics are available. Viral entry is mediated by the arenavirus GP complex, which consists of the stable signal peptide (SSP), the receptor-binding subunit GP1, and the transmembrane subunit GP2. The cytoplasmic tail (CT) of GP2 is highly conserved among arenaviruses, but its functional role in viral replication is not completely understood. Using a reverse genetics system of a prototypic arenavirus, Pichinde virus (PICV), we show that the GP2 CT contains certain conserved residues that are essential for virus replication, implicating it as a potentially good target for developing antivirals and live-attenuated viral vaccines against deadly arenavirus pathogens.

Spatial Organization of Expanding Bacterial Colonies Is Affected by Contact-Dependent Growth Inhibition.

SummaryIdentifying how microbes are able to manipulate, survive, and thrive in complex multispecies communities has expanded our understanding of how microbial ecosystems impact human health and the environment. The ability of bacteria to negatively affect neighbors, through explicit toxin delivery systems, provides them with an opportunity to manipulate the composition of growing microbial communities. Contact-dependent inhibition (CDI) systems (a Type Vb secretion system) are a distinct subset of competition systems whose contribution to shaping the development of spatially structured bacterial communities are yet to be fully understood. Here, we compare the impact of different CDI systems, at both the single-cell and population level, to determine the key drivers of CDI-mediated competition within spatially structured bacterial populations. Through an iterative approach using both an Escherichia coli experimental system and computational modeling, we show that CDI systems have subtle and system-specific effects at the single-cell level, generating single-cell-wide boundaries between CDI-expressing inhibitor cells and their neighboring targets. Despite the subtle effects of CDI at a single-cell level, CDI systems greatly diminished the ability of susceptible targets to expand their range during colony growth. The inoculum density of the population, together with the CDI system-specific variables of the speed of inhibition after contact and biological cost of CDI, strongly affects CDI-mediated competition. In contrast, the magnitude of the toxin-induced growth retardation of target cells only weakly impacts the composition of the population. Our work reveals how distinct CDI systems can differentially affect the composition and spatial arrangement of bacterial populations.

Construction of a novel Escherichia coli expression system: relocation of lpxA from chromosome to a constitutive expression vector.

The selective marker in the plasmid-based expression system is usually a gene that encodes an antibiotic-resistant protein; therefore, the antibiotic has to add to maintain the plasmid when growing the bacteria. This antibiotic addition would lead to increase of production cost and the environment contamination. In this study, a novel Escherichia coli expression system, the lpxA deletion mutant harboring an lpxA-carrying vector, was developed. To develop this system, three plasmids pCas9Cre, pTF-A-UD, and pRSFCmlpxA were constructed. The plasmid pCas9Cre produces enzymes Cas9, λ-Red, and Cre and can be cured by growing at 42 °C; pTF-A-UD contains several DNA fragments required for deleting the chromosomal lpxA and can be cured by adding isopropyl-D-thiogalactopyranoside; pRSFCmlpxA contains the lpxA mutant lpxA123 and CamR. When E. coli were transformed with these three plasmids, the chromosomal lpxA and the CamR in pRSFCmlpxA can be efficiently removed, resulting in an E. coli lpxA mutant harboring pRSFlpxA. The lpxA is essential for the growth of E. coli; its relocation from chromosome to a constitutive expression vector is an ideal strategy to maintain the vector without antibiotic addition. The lpxA123 in pRSFlpxA can complement the deletion of the chromosomal lpxA and provide a strong selective pressure to maintain the plasmid pRSFlpxA. This study provides an experimental evidence that this novel expression system is convenient and efficient to use and can be used to improve L-threonine biosynthesis in the wild type E. coli MG1655 and an L-threonine producing E. coli TWF006.

Synthetic symbiosis combining plasmid displacement enables rapid construction of phenotype-stable strains

Plasmid-based microbial systems have been a major workhorse for chemical and pharmaceutical production. The biosafety issues and elevated industrial cost of antibiotic usage have led to the development of alternative strategies for plasmid selection and maintenance. Such strategies, including auxotrophy complementation, post-segregational killing, operator-repressor and RNA-based interactions often require extensive engineering of various elements and may result in extra metabolic burden in the cells. Herein, we report a design of synthetic symbiosis combining plasmid displacement to construct a phenotype-stable microbial system. By sequestrating an endogenous essential gene folP, cells obtained long-term plasmid maintenance with minimum cost. The phenotype performance was also inherited for up to 80 generations demonstrated by the production of salicylic acid in Escherichia coli. Meanwhile, the temperature-induced curing method of the intermediate plasmids enables rapid engineering. This design can lead to broad applications as a reliable and convenient plasmid-based expression system.

Is the Sickle Hemoglobin Polymer Structure a Frustrated Spin-Glass?

Sickle hemoglobin differs from normal adult hemoglobin by a val in place of glu at the β6 position of the beta chain. This causes deoxygenated HbS to form 14 strand polymers with virtually no change to the structure of the hemoglobin molecule itself. The β6 site comprises one class of intermolecular contacts known as lateral. A second class of contacts known as axial contacts comprises connections that run roughly along the axis of the fiber. The axial contacts present in the linear double strands found in crytallized HbS have been customarily thought to constitute the contacts present in the twisted fiber. However, it was recently observed that an alternative configuration of the same contacts might also be possible, interchanging donor and acceptor regions of the axial contact, but retaining the lateral contact. In preliminary simulations we have discovered that these alternatives spontaneously generate twisted double strands instead of linear ones. We are exploring the possibility that neither form is exclusively present, but that instead the polymer contains a non-stoichiometric mixture of both types of axial contacts, in a structure similar to a frustrated spin glass. To test this notion, we are constructing more exact models, as well as creating site direct mutants. The mutants are being created with a plasmid-based prokaryotic expression system that has previously been used for high-level protein production (Shen, et al., PNAS 90:8108-8112). The effects of the variation in contact partners will be tested by measurements of the nucleation kinetics of molecular hybrids, which is highly sensitive method to their presence and ability to participate in the growing structure. We will report on the current theoretical and experimental status of this project; if correct, this could have implications for all patholoigal polymerizing systems.