Plasma-treated Samples Research Articles

Novel Strategy of Treating 2-Nitrobenzoic Acid Crystals with Energetic N2 Neutrals Using Cold Plasma

The organic adduct compounds of 2-nitrobenzoic acid crystals were grown as optically transparent crystals using the conventional slow evaporation solution technique. The crystals were powdered and irradiated with cold plasma. Cell parameter analysis confirmed the formation of a new crystalline material that resides in the triclinic P crystal system with space group P1. Fourier transform infrared spectra were recorded using the KBr pellet technique to determine the vibrational functional groups in the compound. Powder X-ray diffraction analysis was used to reveal the crystalline orientation of the powdered samples of the grown crystals. The obtained full width at half maximum for the (001) plane in the XRD spectrum indicates the excellent crystalline quality of the 2-nitrobenzoic acid crystals. The recorded UV–Vis absorption spectra reveal that the grown powdered crystal samples possess cut-off edges wavelengths at 428 and 428 nm and 353 and 354 nm for pure and plasma-treated samples, respectively. The optical energy bandgaps were found to be 2.0, 2.25, 4.06, and 4.02 eV for the pure and plasma-treated samples, respectively. The photoluminescence spectra show the blue emissions of the crystal. The FE-SEM images show the morphological modifications in which rounded platelets appear on the surfaces of the treated crystals.

Enhanced adsorption of malachite green (MG) dye using RF glow oxygen plasma-modified coconut carbon shell: A sustainable approach for effluent treatment

The textile industry produces dye pollutants that are both harmful and difficult to degrade. This study explores the enhanced adsorption of Malachite Green (MG) dye using coconut carbon shells treated with RF glow oxygen plasma discharge. Plasma treatment improved the surface properties of the adsorbent by introducing oxygen-containing functional groups and increasing surface polarity, which boosted dye adsorption through hydrogen bonding, electrostatic interactions, and π-π stacking. Experimental results revealed that a 10-minute plasma treatment optimally enhanced adsorption capacity by 39 % compared to untreated samples. The Langmuir isotherm model demonstrated a maximum adsorption capacity (qm) of 161 mg/g, surpassing the Freundlich model. At pH 8, using 0.2 g of adsorbent in 50 mL solutions with initial dye concentrations of 25 mg/L and 100 mg/L, the 10-minute plasma-treated samples achieved adsorption capacities of 6.01 mg/g and 23.95 mg/g, respectively, compared to 4.72 mg/g and 17.2 mg/g for the untreated samples. This corresponded to removal efficiencies of 96.12 % and 95.8 % for the treated samples, and 75.6 % and 68.8 % for the untreated samples, after 80 min of contact at 200 rpm. UV–vis spectrophotometry confirmed the reduction in dye concentration after adsorption. FE-SEM analysis revealed that plasma treatment created micro-pores on the coconut carbon shell, enhancing adsorption capacity, while SEM-EDX analysis showed increased oxygen content after 10 min of treatment. FTIR analysis identified additional carbonyl (-C=O) and hydroxyl (-OH) groups, indicating the incorporation of oxygen-containing functional groups due to plasma treatment. Confocal Raman microscopy was also used to analyze the microstructural changes in the samples.

Tunnel silicon oxynitride phase transformation for n-type polysilicon passivating contacts in crystalline silicon solar cells

The study investigates the fabrication and characterization of tunnel oxynitride (TON) layers produced using Plasma-Enhanced Chemical Vapor Deposition (PECVD) at different pressure and power variations. The aim is to explore TON layers as potential substitutes for conventional SiO2 in Tunnel Oxide Passivated Contact (TOPCon) solar cells. Foe this purpose, an effective oxide thickness (EOT) of 1.1–1.2 nm and 1.5–1.6 nm has been achieved by treating the TON samples with NH3 and N2 gas plasma, respectively. Fourier Transform Infrared Spectroscopy (FTIR) analysis revealed critical variations in the chemical bonding within TON layers, which exhibit different properties based on the deposition conditions. The presence of nitrogen-nitrogen and nitrogen–hydrogen bonds is prominently influenced by changes in the PECVD parameters, directly affecting the layer’s optical and electronic properties. Notably, the presence of hydroxyl (O–H) and amino (NH2) groups within the TON structure suggests an improvement in surface passivation, essential for optimizing solar cell performance and durability. A lifetime of 737 and 823 μs has been recorded for N2 and NH3 samples, compared to the NAOS 710 μs reference sample. NH3 plasma-treated samples show an improved iVoc of 736 mV, indicating better phase transformation and passivation quality than N2 plasma treatment and the NAOS reference sample.

The effect of plasma activated water on antimicrobial activity of silver nanoparticles biosynthesized by cyanobacterium Alborzia kermanshahica

BackgroundSilver nanoparticles are extensively researched for their antimicrobial properties. Cold atmospheric plasma, containing reactive oxygen and nitrogen species, is increasingly used for disinfecting microbes, wound healing, and cancer treatment. Therefore, this study examined the effect of water activated by dielectric barrier discharge (DBD) plasma and gliding arc discharge plasma on the antimicrobial activity of silver nanoparticles from Alborzia kermanshahica.MethodsSilver nanoparticles were synthesized using the boiling method, as well as biomass from Alborzia kermanshahica extract grown in water activated by DBD and GA plasma. The physicochemical properties of the synthesized nanoparticles were evaluated using UV-vis spectroscopy, Fourier-transform infrared (FTIR) spectroscopy, dynamic light scattering (DLS), zeta potential analysis, transmission electron microscopy (TEM), and gas chromatography-mass spectrometry (GC-MS) analysis. Additionally, the disk diffusion method was used to assess the antimicrobial efficacy of the manufactured nanoparticles against both Gram-positive and Gram-negative bacteria.ResultsThe spectroscopy results verified the presence of silver nanoparticles, indicating their biosynthesis. The highest amount of absorption (1.049) belonged to the nanoparticles synthesized by boiling under GA plasma conditions. Comparing the FTIR spectra of the plasma-treated samples with DBD and GA revealed that the DBD-treated samples had more intense peaks, indicating that the DBD method proved to be more effective in enhancing the functional groups on the silver nanoparticles. The DLS results revealed that the boiling method synthesized silver nanoparticles under DBD plasma treatment had a smaller particle size (149.89 nm) with a PDI of 0.251 compared to the GA method, and the DBD method produced nanoparticles with a higher zeta potential (27.7 mV) than the GA method, indicating greater stability of the biosynthesized nanoparticles. Moreover, the highest antimicrobial properties against E. coli (14.333 ± 0.47 mm) were found in the DBD-treated nanoparticles. TEM tests confirmed that spherical nanoparticles attacked the E. coli bacterial membrane, causing cell membrane destruction and cell death. The GC-MS results showed that compounds like 2-methylfuran, 3-methylbutanal, 2-methylbutanal, 3-hydroxy-2-butanone, benzaldehyde, 2-phenylethanol, and 3-octen-2-ol were much higher in the samples that were treated with DBD compared to the samples that were treated with GA plasma.ConclusionThe research indicated that DBD plasma was more efficient than GA plasma in boosting the antimicrobial characteristics of nanoparticles. These results might be a cornerstone for future advancements in utilizing cold plasma to create nanoparticles with enhanced antimicrobial properties.

Investigation of the Interfacial Fusion Bonding on Hybrid Additively Manufactured Components under Torsional Load.

Hybrid manufacturing processes integrate multiple manufacturing techniques to leverage their respective advantages and mitigate their limitations. This study combines additive manufacturing and injection molding, aiming to efficiently produce components with extensive design flexibility and functional integration. The research explores the interfacial fusion bonding of hybrid additively manufactured components under torsional loading. Specifically, it examines the impact of various surface treatments on injection molded parts and the influence of different build chamber temperatures during additive manufacturing on torsional strength. Polycarbonate components, neat, with glass or carbon fiber-reinforcement, are produced and assessed for dimensional accuracy, torsional strength, and fracture behavior. The findings emphasize the critical role of surface treatment for the injection molded components before additive manufacturing. Additionally, the study identifies the influence of chamber temperatures on both dimensional accuracy and torsional strength. Among all investigated materials, plasma-treated neat samples exhibited the best torsional strength. The torsional strength was increased by up to 87% by actively heating the build chamber to 186 °C for neat polycarbonate. These insights aim to advance the quality and performance of hybrid additively manufactured components, broadening their application potential across diverse fields.

Argon plasma-enhanced UV light emission from ZnO submicrowires grown by hydrothermal method

In this work, the optical, morphological, and structural improvements of vertically aligned, hydrothermally grown ZnO submicrowires (SMWs) treated with a 250 W, 250 V RF argon plasma (Ar) during different exposure times were investigated by scanning and transmission electrons microscopy, X-ray diffraction, and micro-Raman and photoluminescence (PL) spectroscopies. In two steps, the SMWs were synthesized in an aqueous medium at low temperatures. The plasma-treated samples showed significantly improved room-temperature PL compared to untreated samples. All the treated samples exhibited a substantial increase of the near band edge UV emission intensity and a decrease of the deep level emission in the visible. The samples treated for 4 minutes presented the best UV/vis intensity ratio of ∼ 1568 (an increase of ⁓174-fold with respect to the untreated sample). The analysis of the UV band in terms of the first and second phonon replica of the excitonic emission indicated that the Ar plasma treatment favors the multiple phonon-exciton coupling, with partial correlation with the observed overall increase of the UV/visible intensity ratio. From the PL measurements at low temperatures, the presence of excitons bound to H donors in the ZnO structure was inferred. The possible reasons for the Ar plasma-induced enhancement of the UV emission from the treated SMWs are discussed in terms of previous work, the observed morphology and changes expected to occur at the SMW surfaces due to Ar ion impacts from the plasma.

Non-thermal obliteration of critically ranked carbapenem-resistant Acinetobacter baumannii and its resistance gene in a batch atmospheric plasma reactor

Wastewater treatment plants (WWTPs) have been implicated as direct key reservoir of both antibiotic-resistant bacteria (ARB) and antibiotic-resistant genes (ARGs) associated with human infection, as high concentrations of ARBs and ARGs have been detected in recycled hospital wastewater. Among the ARBs, the carbapenem-resistant Acinetobacter baumannii has been ranked as priority 1 (critical) pathogen by the World Health Organization (WHO), due to its overwhelming burden on public health. Therefore, this study is aimed at investigating non-thermal plasma (NTP) technology as an alternative disinfection step to inactivate this bacterium and its ARGs. Culture-based method and PCR were employed in confirming the carbapenem resistance gene blaNDM-1 in A. baumannii (BAA 1605). Suspension of carbapenem-resistant A. baumannii (24 h culture) was prepared from the confirmed isolate and subjected to plasma treatment at varying time intervals (3 min, 6 min, 9 min, 12 min, and 15 min) in triplicates. The plasma-treated samples were evaluated for re-growth and the presence of the resistance gene. The treatment resulted in a 1.13 log reduction after 3 min and the highest log reduction of ≥ 8 after 15 min, and the results also showed that NTP was able to inactivate the blaNDM-1 gene. The log reduction and gel image results suggest that plasma disinfection has a great potential to be an efficient tertiary treatment step for WWTPs.

Potential of cold plasma pretreatment for preserving biochemical attributes and ensuring the microbiological safety of saffron stigma.

Saffron, similar to numerous other agricultural commodities, is susceptible to microbial contamination during cultivation and postharvest handling. Cold plasma treatment has emerged as an effective method for microbial inactivation while preserving food quality. The aim of this research was to preserve the color integrity and minimize the presence of microorganisms in dried saffron stigma by implementing cold plasma pre-treatment. Process parameters were optimized using the response surface method (RSM), considering the type of atmosphere (argon and air), plasma exposure time (1, 5, and 10 min), and plasma power (40, 70, and 100 W) as independent variables. The objectives were to maximize crocin content and minimize the total microbial load. The analysis of the response surface revealed that the argon atmosphere had a more significant impact on reducing microbial contamination than air, and an increase in plasma exposure time led to a decrease in microbial load. The maximum reduction in microbial load, by 0.9 logarithmic cycles compared to the control, was achieved with a 10-min treatment at 40 W power. Extended plasma exposure durations led to a minor reduction in the color, taste, aroma, and antioxidant properties of saffron stigma. Specifically, the color, taste, and aroma decreased by 0.5%, 0.5%, and 0.08%, respectively, with longer plasma exposure times. The antioxidant activity decreased by 0.64% with prolonged exposure time. However, the plasma-treated samples did not show any signs of Escherichia coli, mold, or yeast. Furthermore, our findings demonstrated that the type of atmosphere significantly influenced the reduction of infection and maintenance of saffron stigma's color quality. Cold plasma pretreatment holds promise as a viable method for preserving the physicochemical attributes of saffron while effectively reducing microbial contamination.

Biochemical evaluation of wound healing efficacy of cold plasma-conditioned media under different operational conditions

Wound healing is a dynamic and intricate biological process crucial for tissue repair and regeneration. This study explores the potential therapeutic impact of non-thermal plasma generated by a hand-held cold atmospheric pressure plasma jet (C-APPJ) source on fibroblast cells (NIH/3T3) in vitro. The sequential phases of wound healing—inflammation, cell proliferation, and tissue remodelling, were assessed in the context of cell migration and oxidative stress dynamics. Typically, plasma generates a mixture of several reactive oxygen/nitrogen (ROS/RNS) species. The present study investigates the safety and efficacy of C-APPJ under distinct operating conditions (argon (GI) and argon + nitrogen (GII)) and exposure times (1 min and 3 min). Cell viability assays confirmed the non-cytotoxic nature of the cold plasma conditioned medium. The levels of ROS/RNS and malondialdehyde (biomarker of oxidative stress) in the plasma-treated samples remained comparable with the control fibroblast cells grown in normal media, suggesting the favourable modulation of ROS by the cellular antioxidant mechanisms. Accelerated wound-closure rates from 6th hour to 24th hour in all the treated groups ranged from 38.76% to 45.66%, when compared to 34.25% in the control cells. Substantial cell migration leading to 51.59% of wound closure was recorded in the argon + nitrogen (GII) group exposed for 3 min. Taken together, the potential of cold plasma to effectively heal wounds without causing prolonged oxidative stress and chronic inflammation is implicated. These outcomes suggest scope for clinical application of C-APPJ as safe and cost-effective treatment of wounds (ulcers, burns, diabetic foot) and wound disinfection.

Sustainable pre-treatment of cellulose knitwear in digital pigment printing processes

PurposeIn the field of research on the application of digital printing to textile materials, there are still many research issues that arise from the very demanding interaction of digital printing technology and the complex, heterogeneous surface system of textile materials. This is precisely why the area of pre-treatment of textile materials is in need of research, and the purpose of this research was to establish the level of influence of physical and chemical activation of the textile surface with plasma and the possibility of improving the quality of the print and colour reproduction.Design/methodology/approachThe paper deals with the possibility of applying argon and oxygen cold low-pressure plasma in the processing of cellulose knitted fabrics, with the aim of improving the quality of the print and colour reproduction in digital pigment inkjet printing. The selected raw material samples were 100% raw cotton and lyocell. After plasma treatment, the samples were printed by digital ink jet printing with water-based pigment printing ink. An analysis of the micromorphological structure of untreated and plasma-treated samples before and after printing was carried out, and a comparative analysis of the colour of the printed elements was carried out depending on the pre-treatment.FindingsThe conducted research showed a positive influence of plasma pre-treatment on the coverage of the fibre surface with pigments, the uniformity of pigment distribution along the fibre surface and the uniformity of the distribution of the polymeric binder layer. This has a positive effect on colour reproduction. Also, certain improvements in colourfastness to washing were obtained.Research limitations/implicationsConsidering the complexity of the topic, although exhaustive, this research is not sufficient in itself, but opens up new questions and gives ideas for further research that must be carried out in this area.Practical implicationsAlso, this kind of research contributes to the possibility of adopting the idea of industrial plasma transformation, as an ecologically sustainable functionalisation of textiles, which has not yet been established.Originality/valueThis research is certainly a contribution to the establishment of acceptable textile pre-treatment methods in the field of digital printing, as one of the key quality factors in digital textile printing (DTP). Considering the still large number of obstacles and unanswered questions encountered in the field of digital printing on textiles, this kind of research is a strong contribution to the understanding of the fundamental mechanisms of the complex interaction between printing ink and textile.

Pencil lead etched by plasma: Novel photonic material that can control the reflection from the visible to the infrared region

The development of surface processing technology that modulate the intensity of light reflection over a wide wavelength range has important implications for the application of photonics technology. We previously reported that plasma irradiation to a pencil lead formed structural colors. This phenomenon occurs by the thin-layer interference between the clay in the pencil lead exposed by the plasma etching and the surface graphite of the sample. We now report that a pencil lead irradiated with plasma for a long time becomes a new photonic material that caused interference in the near-infrared or mid-infrared range. The thickness of the clay layer exposed by the plasma etching increased with the increment of the plasma irradiation time, and the reflection spectra in the near-infrared and mid-infrared ranges were changed by the light interferences. In addition, the reflection spectrum pattern of the plasma-treated sample well agreed with the simulated pattern based on a thin-layer interference model. According to this method, photonic materials with the desired reflectance over a wide wavelength range can be produced by varying the plasma irradiation time. Furthermore, the irradiation time required to produce the desired optical material can be estimated by the simulation. The infrared reflective area can be easily controlled by using a masking plastic plate. With this method, we succeeded in forming letters on the sample that could only be read by an infrared camera.

The impact of atmospheric air plasma treatment on the polyfunctional end-use polyester fabric using new synthetic pyrazole dye

Before gluing, bonding, and painting, a variety of materials' surfaces can be modified using the widely used plasma treatment technique. These materials include plastics, glass, metals, and wood. Materials' physical and chemical properties are changed in an environmentally responsible way to enhance or confer particular qualities. The recently used technology known as low-temperature atmospheric pressure plasma (LTAPP) allows heat-sensitive materials to be surface modified in a simple, one-step process. Polymer-based materials are frequently surface modified using LTAPP treatment to improve adhesion, printability, and surface sterility. Polyester's superior mechanical and physical qualities have led to its widespread use as a technical textile and garment material in the form of fibers, films, and plastics. Its limited versatility in terms of end use has been caused by its poor surface properties as the hydrophobic nature of polyester surface, roughness, the crystallinity, and lack of dyeability which are the main drawback restricting its use in different textile applications especially during wet treatments unlike natural fibers. In order to increase the fabric's hydrophilicity and dyeability, the surface of a polyester fabric was altered in this study using atmospheric pressure plasma treatment with atmospheric plasma jet and dielectric barrier discharge (APJ-DBD) technology in air. The primary obstacles in making dielectric barrier discharge (DBD) plasma treatment suitable for industrial purposes are the extended duration of treatment and the utilization of elevated voltage levels. The combination between the atmospheric plasma jet and the dielectric barrier discharge reduces the optimal treatment time to 1 min and the applied voltage to 3.3 kV. After being exposed to oxygen plasma species for a brief period of time (between 30 and 300 s), and were analyzed using an X-ray diffraction machine, an X-ray photoelectron spectroscopy (XPS), static contact angle, and a scanning electron microscope (SEM) to investigate changes in the morphology and chemical nature of the surface, respectively. Fabric wettability increased as a result of plasma treatment, which also increased the fabric's surface roughness, as demonstrated by SEM and X-ray diffraction. The contact angle decreases by increasing the treatment time. The dyeability of untreated and plasma-treated samples was examined with respect to washing, rubbing, perspiration, sublimation, and light fastness. Additionally, color strength was examined. Adequately, compared to the untreated fabric, polyester treated with plasma showed improved dyeing performances. The technical reactivity of poly (ethylene-terephthalate) (PET) fabrics was found to be effectively increased by atmospheric air plasma treatment, creating new avenues for surface modification in light of the expanding environmental and energy-saving concerns.

Plasma etching promoting the saturable absorption of BiOI

Materials exhibiting exceptional saturable absorption performance and etching compatibility are significant in the context of advanced optical devices. Our study demonstrates that plasma etching can effectively promote the saturable absorption of BiOI nanosheets because of defect formation. Remarkably, the BiOI nanosheet subjected to the optimized H2/Ar-plasma treatment manifests a substantial nonlinear absorption coefficient (βeff) of (−5.5 ± 0.7) × 103 cm GW−1 under laser excitation at 800 nm, while the pristine BiOI sample exhibits no discernible nonlinear optical response. The βeff of plasma-treated BiOI samples is (−4.2 ± 0.9) × 103 cm GW−1 at 515 nm, surpassing that of the untreated counterpart by more than fourfold. A comprehensive structural and spectroscopic analysis indicates that oxygen vacancies serve to increase the density of in-gap states, thereby narrowing the bandgap of the BiOI. This reduced bandgap effectively facilitates the Pauli-blocking effect and, in turn, augments the saturable absorption properties of the samples. In contrast to oxygen vacancies, iodine vacancies make a negligible contribution to the performance enhancement of BiOI. Our result would provide a promising way to improve the nonlinear optical response of materials.

Multi-Cohort Transcriptomic Profiling of Medical Gas Plasma-Treated Cancers Reveals the Role of Immunogenic Cell Death.

The therapeutic potential of cold physical gas plasma operated at atmospheric pressure in oncology has been thoroughly demonstrated in numerous preclinical studies. The cytotoxic effect on malignant cells has been attributed mainly to biologically active plasma-generated compounds, namely, reactive oxygen and nitrogen species. The intracellular accumulation of reactive oxygen and nitrogen species interferes strongly with the antioxidant defense system of malignant cells, activating multiple signaling cascades and inevitably leading to oxidative stress-induced cell death. This study aims to determine whether plasma-induced cancer cell death operates through a universal molecular mechanism that is independent of the cancer cell type. Using whole transcriptome data, we sought to investigate the activation mechanism of plasma-treated samples in patient-derived prostate cell cultures, melanoma, breast, lymphoma, and lung cancer cells. The results from the standardized single-cohort gene expression analysis and parallel multi-cohort meta-analysis strongly indicate that plasma treatment globally induces cancer cell death through immune-mediated mechanisms, such as interleukin signaling, Toll-like receptor cascades, and MyD88 activation leading to pro-inflammatory cytokine release and tumor antigen presentation.

Air plasma activation of catalytic sites within MXene nanosheets for oxygen evolution and urea oxidation catalysis

Atmospheric pressure medium–blocked discharge plasma modified the hydroxyl and fluorine groups on the dispersed surface of MXene as well as the valence states of metal ions to promote electrocatalytic reactions efficiently. The plasma-treated samples maintain the nature and macroscopic morphology of the open active sites of the original framework structure, whereas the valence and electronic structures of the metal centers are altered. When dielectric barrier discharge plasma-modified MXene is used to assemble a monolithic hydrolysis device for hydrogen evolution reaction (HER)||oxygen evolution reaction (OER), the current density is up to 100 mA/cm2 at 2.1 V (actual data without IR compensation). Furthermore, in urea-assisted water electrolysis HER||urea oxidation reaction, the voltage is only 1.8 V, which is 300 mV lower than that of HER||OER. Meanwhile, the electrocatalytic system can operate continuously with high durability for more than 100 h. This work provides an effective electrocatalyst not only for efficient hydrogen production but also for urea wastewater purification.

Rheological and gelling properties of atmospheric pressure cold plasma treated finger millet (Eleusine coracana) starch

Interest in exploring alternative starch sources like finger millet is rising due to wide starch applications. However, native starch often lacks desired qualities, including rheological properties. Modification is thus necessary for specific end uses. Plasma treatment as a greener and sustainable method for starch modification was therefore, studied for its ability to impact rheological properties of finger millet starch (FMS). Considerable changes in the rheological properties on FMS was noted, a significant decrease and increase (p < 0.05) in the peak viscosity (from 3.35 to 0.553 Pa.s) and paste clarity respectively was observed, indicating occurrence of depolymerization. However, intermediate plasma-treated samples (200 V) observed a decrease in paste clarity attributed to aggregate formation and cross-linking. Cross-linking was also confirmed by findings of frequency sweep where a continuous decrease in G’ values of plasma treated FMS gel was interrupted by sudden increase. Despite depolymerization causing alteration of rheological behaviour such as decrease in shear thinning properties, gel strength observed a contradictory increase. This was attributed to incorporation of functional group and absence of shear responsible for network formation giving higher gel strength to FMS gels. This is elaborated in detail in the study. The study thus concluded that cold plasma significantly impacted all the rheological properties of the FMS and hence can prove to be beneficial for modification of starch rheological parameters.

Dyeing jute-cotton blended fabric with natural dyes: A chemical-free approach of LPGD plasma technology using O2 and N2 gases

In response to growing environmental concerns in the textile industry, this study investigates the effects of a low-pressure glow discharge (LPGD) plasma with oxygen (O2) and nitrogen (N2) gases on the dyeing process of jute-cotton (JC) blended fabrics, using coffee extract as a natural dye source. The hydrophilic properties of all the JC blended fabric samples were enhanced due to plasma treatments. The contact angles of the samples were significantly decreased from 131° to 52° (O2) and 55° (N2) after 20 minutes of plasma treatment. Compositional analysis revealed new functional groups e.g., CO and N−H, on the fabric's surface after plasma treatment. Surface morphology analysis indicated that the surface roughness of the treated fabric was increased with plasma treatment time. The improvement of the wicking properties of the fabric with contact time was also observed. All the plasma-treated fabric samples exhibited good colour strength (k/s), wash fastness, and rubbing fastness. After plasma treatment with O2 gas for 20 minutes, the k/s value had increased from 3.6 to 4.9. Washing and rubbing (dry) color fasting ratings were enhanced from 1 to 3 and 2–4, respectively, following a 20-minute plasma treatment with O2 gas. Although both O2 and N2 plasma treatment showed a significant impact on the dyeing properties of JC blended fabric, O2 gas provided better results compared to N2 gas plasma treatment.

Effects of plasma treatment on biodegradation of natural and synthetic fibers

This study investigates the application of plasma treatment as a means to enhance biodegradation and modify the structural characteristics of fibrous composites. The methodological component of the study includes the selection of the research object; production of composites; low-temperature plasma treatment, and treatment of biodegradability and mechanical strength of samples. The strengthening of fibers with cellulose leads to a significant improvement in mechanical strength. Such an indicator as mechanical strength increases from 18 to 21 MPa. Treatment of natural fibers with low-temperature plasma led to an increase in mechanical strength from 18 to 25 MPa. Treating reinforced fibers with low-temperature plasma currently results in an even greater enhancement in mechanical strength, increasing from 18 to 29 MPa.The electron microscopy of samples reveals some differences in cell wall microfibrils between plasma-treated and non-treated samples. The non-treated fibres are found to have chips and voids. Meantime, the plasma-treated fibres show structural changes in certain regions which resemble wood charring. Through a comprehensive analysis, this research underscores the substantial impact of plasma treatment on the degradation kinetics and morphological features of cellulose-based composites. The results reveal distinct alterations in the composition and behavior of plasma-treated fibres, signifying a shift towards enhanced biodegradability. The natural fibres examined in this study contained 28–30% lignin, whereas the composites exhibited a lower lignin content of 21–23%. These findings corroborate the inference that plasma treatment induces significant changes in fibre structure, accelerating the biodegradation process by 7 days.

Enhancing Titanium Disk Performance through In-Pack Cold Atmospheric Plasma Treatment.

While titanium dental implants have already been clinically established, ongoing research is continuously being conducted to advance the fields of osseointegration and bacterial resistance, seeking further improvements in these areas. In this study, we introduce an innovative method for treating titanium surfaces within tightly sealed packaging. Specifically, titanium discs, enclosed in surgical-grade packaging, underwent treatment using cold atmospheric plasma (CAP). The surfaces were thoroughly characterized in terms of wettability, crystalline structure, and chemical composition. Hemocompatibility analyses were conducted using blood diluted in sodium citrate (1:9) exposed to titanium discs for 30 min inside a CO2 incubator at 37 °C. Subsequently, various blood parameters were evaluated, including prothrombin time (PT), activated partial thromboplastin time (APTT), and platelet adhesion. Microbiological analyses were also performed using Pseudomonas aeruginosa (ATCC 27853) for 4 h at 37 °C. The treatment with CAP Jet resulted in a reduction in contact angle without causing any changes in the crystalline structure. No statistically significant differences were observed in the blood parameters. The plasma-treated samples exhibited lower PT and APTT values compared to those of the control group. The surfaces treated with CAP Jet showed increased platelet activation, platelet density, and thrombus formation when compared with the untreated samples. Moreover, the treated surfaces demonstrated lower bacterial colony formation compared with other surfaces.

Near-Plasma Chemical Surface Engineering.

As a new trend in plasma surface engineering, plasma conditions that allow more-defined chemical reactions at the surface are being increasingly investigated. This is achieved by avoiding high energy deposition via ion bombardment during direct plasma exposure (DPE) causing destruction, densification, and a broad variety of chemical reactions. In this work, a novel approach is introduced by placing a polymer mesh with large open area close to the plasma-sheath boundary above the plasma-treated sample, thus enabling near-plasma chemistry (NPC). The mesh size effectively extracts ions, while reactive neutrals, electrons, and photons still reach the sample surface. The beneficial impact of this on the plasma activation of poly (tetrafluoroethylene) (PTFE) to enhance wettability and on the plasma polymerization of siloxanes, combined with the etching of residual hydrocarbons to obtain highly porous SiOx coatings at low temperatures, is discussed. Characterization of the treated samples indicates a predominant chemical modification yielding enhanced film structures and durability.