Plane Wave Emissions Research Articles

Frame rate improvement in coherent plane-wave compounding using null subtraction imaging

Coherent plane-wave compounding (CPWC) has attracted significant attention in preclinical research and clinical diagnosis. However, a trade-off exists in CPWC between the image quality and frame rate. Null subtraction imaging (NSI), as a novel beamforming method, can realize high-quality imaging with enhanced lateral resolution and suppressed grating lobes. This study explores NSI to reduce the number of emissions while preserving the imaging quality. The performance of the proposed method is assessed using the Plane-Wave Imaging Challenge in Medical Ultrasound datasets, including phantom and in vivo datasets. The results verify the potential of NSI in terms of frame rate improvement compared to the conventional delay and sum beamforming method. NSI with 5 and 15 plane-wave emissions is evaluated. For example, for the experimental phantom datasets, NSI with 15 plane-wave emissions improves the lateral full-width at half maximum by 0.10 in comparison to DAS with 75 plane-wave emissions. Moreover, the corresponding contrast ratio and generalized contrast-to-noise ratio increase from 25.11 to 31.19 dB and 0.63 to 0.68, respectively, indicating contrast improvement. Thus, compared to DAS with 75 plane-wave emissions, the proposed method accelerates data acquisition by a factor of 5, resulting in remarkable frame rate improvement.

Enhancing plane-wave emission with a combination device based on acoustic metamaterial

Generating high sound-intensity plane waves typically requires transducer arrays with complex synchronizing systems and high-output amplifiers. This work proposes a simple combination device to convert fan-shaped waves into elevated sound-pressure plane waves. The proposed device primarily relies on phase reconstruction of near-zero index metamaterials and the superposition of reflected waves in the reverberation field. The compact device, which is easy to manufacture, consists of a short waveguide equipped with two types of converters. One of the converters makes use of inverted cone's sound-guiding properties to convert fan-shaped waves into cylindrical waves over a broad frequency band. The other converter is comprised of rigid cylinders with triangular lattice arrays, effectively acting as the near-zero index metamaterial to transform cylindrical waves into plane waves. Both the simulated and experimental results show that the emitted plane waves can be linearly amplified by increasing the number of point sources that are separated by integer multiples of the wavelength in the vertical cavity. This study presents a straightforward and efficient approach to generate plane waves with a low-cost array assembly design, thereby enabling the widespread use of acoustic testing and underwater detection.

Retrospective Ultrasound Doppler Quantification Using a Single Acquisition in Healthy Adults

Using an experimental tool for retrospective ultrasound Doppler quantification-with high temporal resolution and large spatial coverage-simultaneous flow and tissue measurements were obtained. We compared and validated these experimental values against conventional measurements to determine if the experimental acquisition produced trustworthy tissue and flow velocities. We included 21 healthy volunteers. The only exclusion criterion was the presence of an irregular heartbeat. Two ultrasound examinations were performed for each participant, one using conventional and one using experimental acquisition. The experimental acquisition used multiple plane wave emissions combined with electrocardiography stitching to obtain continuous data with over 3500 frames per second. With two recordings covering a biplane apical view of the left ventricle, we retrospectively extracted selected flow and tissue velocities. Flow and tissue velocities were compared between the two acquisitions. Statistical testing showed a small but significant difference. We also exemplified the possibility of extracting spectral tissue Doppler from different sample volumes in the myocardium within the imaging sector, showing a decrease in the velocities from the base to the apex. This study demonstrates the feasibility of simultaneous, retrospective spectral and color Doppler of both tissue and flow from an experimental acquisition covering a full sector width. The measurements were significantly different between the two acquisitions but were still comparable, as the biases were small compared to clinical practice, and the two acquisitions were not done simultaneously. The experimental acquisition also enabled the study of deformation by simultaneous spectral velocity traces from all regions of the image sector.

Two-Dimensional Wavenumber Analysis Implemented in Ultrasonic Vector Doppler Method with Focused Transmit Beams

The multi-angle Doppler method was introduced for the estimation of velocity vectors by measuring axial velocities from multiple directions. We have recently reported that the autocorrelation-based velocity vector estimation could be ameliorated significantly by estimating the wavenumbers in two dimensions. Since two-dimensional wavenumber estimation requires a snapshot of an ultrasonic field, the method was first implemented in plane wave imaging. Although plane wave imaging is predominantly useful for examining blood flows at an extremely high temporal resolution, it was reported that the contrast in a B-mode image obtained with a few plane wave emissions was lower than that obtained with focused beams. In this study, the two-dimensional wavenumber analysis was first implemented in a framework with focused transmit beams. The simulations showed that the proposed method achieved an accuracy in velocity estimation comparable to that of the method with plane wave imaging. Furthermore, the performances of the methods implemented in focused beam and plane wave imaging were compared by measuring human common carotid arteries in vivo. Image contrasts were analyzed in normal and clutter-filtered B-mode images. The method with focused beam imaging achieved a better contrast in normal B-mode imaging, and similar velocity magnitudes and angles were obtained by both the methods with focused beam and plane wave imaging. In contrast, the method with plane wave imaging gave a better contrast in a clutter-filtered B-mode image and smaller variances in velocity magnitudes than those with focused beams.

A New Plane Wave Compounding Scheme Using Phase Compensation for Motion Detection.

Plane wave (PW) transmission has enabled multiple new applications, such as shear wave elastography, ultrafast Doppler imaging, and functional ultrasound imaging. PW compounding (PWC), which coherently sums the echo signals from multiple PW transmits with different angles, is widely used to improve B-mode image quality. When the motion between two speckle images is estimated, PWC suffers from an inherent displacement estimation error. This is derived theoretically and experimentally demonstrated in this work. We show that the phase difference between the acquired data with PW emissions with different angles is related to this error. When the absolute value of the phase difference is larger than π /2, the displacement estimation error occurs. A new scheme, named initial-phase-compensated PWC (IPCPWC), is proposed, which compensates the phase of echo signals from each PW transmit and maintains the absolute value of the phase difference smaller than π /2. The increased signal-to-noise ratio and reduced jitter of IPCPWC in motion data are demonstrated using tissue mimicking phantoms compared with PWC.

Blood flow image by multi-angle composite ultrasonic Doppler vector

Precise measurement of blood flow is of vital importance in studying the formation of thrombus and atherosclerotic plaque. However, conventional color Doppler methods are limited to obtaining the velocity component along the ultrasound beam and have poor accuracy. Several Doppler flow imaging methods based on the plane wave emission can estimate the blood velocity vectors and visualize hemodynamic parameters, which provide more detailed blood flow information and effectively improve the capability of clinical diagnosis treatment. Considering the low accuracy of the Doppler flow methods for measuring velocity in complex flow fields, an optimization technique is used to improve the imaging quality and the accuracy of velocity estimation. In this study we propose a modified vector Doppler method through combining multi-angle compound technique, to reconstruct blood velocity vectors of carotid bifurcations obtained from 3D printing. Since the multi-angle compound technology can effectively improve the quality of imaging, this technology is applied to Doppler imaging to achieve high-accuracy velocity estimation. It can significantly reduce the velocity estimation errors. Comparing the velocity estimation accuracy of different angle compound numbers (<i>n</i> = 1, 3, 5, and 7) in the simulation, it is found that the accuracy of velocity estimation increases with angle compound increasing. Beside, the 5-angle compound method is more robust for velocity estimation and can obtain higher frames. The experiments were carried out using a programmable ultrasonic array system and a high-frequency linear array transducer L12-5c with a central frequency of 8.125 MHz. The sample rate is set to be 31.25 MHz. The imaging results of carotid bifurcation also show that the vector Doppler based on 5-angle compound can obtain a clear image of intravascular vector flow, which is beneficial to the identifying of complex flow state, and realize intravascular dynamic imaging. Especially, it can capture the vortex phenomenon in the blood stream. The quantitative results indicate that this method significantly reduces the error between the flow calculation results and the reference results, making the estimation results more accurate. In conclusion, the vector Doppler method based on multi-angle compound has the good performance of visualizing complex blood flow and calculating hemodynamic parameters. It also provides the reference for the diagnosis of cardiovascular disease and the research of flow imaging methods.

Plane Wave Imaging through Interfaces.

Plane Wave Imaging (PWI) has been recently proposed for fast ultrasound inspections in the Non-Destructive-Testing (NDT) field. By using a single (or a reduced number) of plane wave emissions and parallel beamforming in reception, frame rates of hundreds to thousands of images per second can be achieved without significant image quality losses with regard to the Total Focusing Method (TFM) or Phased Array (PA). This work addresses the problem of applying PWI in the presence of arbitrarily shaped interfaces, which is a common problem in NDT. First, the mathematical formulation for generating a plane wave inside a component of arbitrary geometry is given, and the characteristics of the resultant acoustic field are analyzed by simulation, showing plane wavefronts with non-uniform amplitude. Then, an imaging strategy is proposed, accounting for this amplitude effect. Finally, the proposed method is experimentally validated, and its application limits are discussed.

Ultrasound deep beamforming using a multiconstrained hybrid generative adversarial network.

Ultrasound beamforming is a principal factor in high-quality ultrasound imaging. The conventional delay-and-sum (DAS) beamformer generates images with high computational speed but low spatial resolution; thus, many adaptive beamforming methods have been introduced to improve image qualities. However, these adaptive beamforming methods suffer from high computational complexity, which limits their practical applications. Hence, an advanced beamformer that can overcome spatiotemporal resolution bottlenecks is eagerly awaited. In this paper, we propose a novel deep-learning-based algorithm, called the multiconstrained hybrid generative adversarial network (MC-HGAN) beamformer that rapidly achieves high-quality ultrasound imaging. The MC-HGAN beamformer directly establishes a one-shot mapping between the radio frequency signals and the reconstructed ultrasound images through a hybrid generative adversarial network (GAN) model. Through two specific branches, the hybrid GAN model extracts both radio frequency-based and image-based features and integrates them through a fusion module. We also introduce a multiconstrained training strategy to provide comprehensive guidance for the network by invoking intermediates to co-constrain the training process. Moreover, our beamformer is designed to adapt to various ultrasonic emission modes, which improves its generalizability for clinical applications. We conducted experiments on a variety of datasets scanned by line-scan and plane wave emission modes and evaluated the results with both similarity-based and ultrasound-specific metrics. The comparisons demonstrate that the MC-HGAN beamformer generates ultrasound images whose quality is higher than that of images generated by other deep learning-based methods and shows very high robustness in different clinical datasets. This technology also shows great potential in real-time imaging.

Image Quality Enhancement Using a Deep Neural Network for Plane Wave Medical Ultrasound Imaging.

Plane wave imaging (PWI), a typical ultrafast medical ultrasound imaging mode, adopts single plane wave emission without focusing to achieve a high frame rate. However, the imaging quality is severely degraded in comparison with the commonly used focused line scan mode. Conventional adaptive beamformers can improve imaging quality at the cost of additional computation. In this article, we propose to use a deep neural network (DNN) to enhance the performance of PWI while maintaining a high frame rate. In particular, the PWI response from a single point target is used as the network input, while the focused scan response from the same point serves as the desired output, which is the main contribution of this method. To evaluate the performance of the proposed method, simulations, phantom experiments and in vivo studies are conducted. The delay-and-sum (DAS), the coherence factor (CF), a previously proposed deep learning-based method and the DAS with focused scan are used for comparison. Numerical metrics, including the contrast ratio (CR), the contrast-to-noise ratio (CNR), and the speckle signal-to-noise ratio (sSNR), are used to quantify the performance. The results indicate that the proposed method can achieve superior resolution and contrast performance. Specifically, the proposed method performs better than the DAS in all metrics. Although the CF provides a higher CR, its CNR and sSNR are much lower than those of the proposed method. The overall performance is also better than that of the previous deep learning method and at the same level with focused scan performance. Additionally, in comparison with the DAS, the proposed method requires little additional computation, which ensures high temporal resolution. These results validate that the proposed method can achieve a high imaging quality while maintaining the high frame rate associated with PWI.

Non-contrast-enhanced ultrafast ultrasound Doppler imaging of spinal cord micro-vessels

With the advantages of non-radiation and low-cost, ultrasound imaging has been widely used in clinical diagnosis. However, due to the compromise between temporal and spatial resolution, the traditional ultrasound imaging method which collects images line by line fails to obtain the images at a high frame rate. Ultrafast ultrasound imaging method based on the plane-wave emission can achieve a high frame rate with the capability for instantaneous hemodynamic imaging of neurovascular response. Besides, by the coherent compounding of the echo signals received from emitting a set of tilting plane-waves, the image quality can be improved in terms of resolution, contrast and signal-to-noise ratio (SNR). Considering the fact that received signals are the mixture of echo signals from the low-speed soft tissue and high-speed blood flow, a clutter filtering method is used to remove the signals of soft tissue. In this study, the ultrafast ultrasound sequence of emission and reception is designed to image the spinal cord by using the groups of multiple steering-angle plane-waves. The so-called f-k migration algorithm based on an exploding reflector model (ERM) is used for coherent plane-wave compounding. Eigenvalue decomposition (EVD) is then applied to tissue and blood signal extraction. The static tissue signals correspond to eigenvectors with low Doppler frequency shift and large magnitude eigenvalue while the high-speed blood flow signals correspond to eigenvectors with high Doppler frequency shift and small eigenvalue. Therefore, frequency and amplitude thresholds can be applied to the accurate separation of the blood component and the tissue component. After the signal extraction, the hemodynamic imaging of blood vessels can thus be obtained from the power Doppler results. The experiments are carried out by using a programmable ultrasonic array system and a high-frequency linear array transducer L22-14vX with a central frequency of 15.625 MHz. The sample acquisition frequency is set to be 62.5 MHz. In rat experiments <i>in vivo</i>, 14040 angle-stilting images per second are compounded into 520 images, each of which is compounded from 27 tilting images (the tilting angles ranging from –10° to 10°). The experiments are conducted on the anesthetized rats with part of the vertebral plate removed. The ultrafast B-mode images are acquired from a 14.0 mm ×12.7 mm region-of-interest. The 520 frames acquired in one second are processed by the clutter filter based on eigenvalue decomposition and Doppler shift analysis. The eigenvectors and eigenvalues corresponding to the soft tissue are discarded. The power Doppler images of the spinal cord micro-vessels are obtained. The experimental results indicate that the ultrafast ultrasound Doppler imaging method is effective for monitoring the hemodynamic variation in spinal cord. The micro-hemorrhage can be identified from the power Doppler images. The quantitative results indicate that the SNR increases with the steering angles increasing. Compared with the results obtained by using 9 steering angles, 5 dB SNR enhancement can be obtained by using the 27 steering angles. In conclusion, the ultrafast ultrasound Doppler technology has the potential applications in spinal cord microvascular imaging and hemodynamic evaluation of neurovascular function of spinal cord.

Radiated EMC Kron's Model of 3-D Multilayer PCB Aggressed by Broadband Disturbance

This paper focuses on novel modeling of radiated electromagnetic compatibility (EMC) coupling onto the multilayer printed circuit board (PCB). Kron's method integrates the electromagnetic (EM) emission, Taylor's, and field-to-interconnect coupling models. The equivalent graph of the field-to-interconnect coupling is established. The modeling methodology consists in defining the primitive sub-network elements (vias, interconnect lines, pads, and ground plane). Kron's graph equivalent to the EMC problem is elaborated. Finally, the coupling voltages are calculated via the tensorial equation translated from the graph. The radiated EMC Kron's model is validated with a four-layer PCB from 0.4 to 1.4 GHz by two scenarios of EM radiation. As proof-of-concept, a prototype of four-layer PCB was designed, fabricated, tested, and simulated in full wave with a commercial three-dimensional EM tool. For the first case, the multilayer PCB was illuminated by plane wave emission propagating in different directions. The numerical computation from Kron's formalism was compared with simulation and measurement. The other case is the field-to-interconnect coupling between a microstrip I-line PCB, as an EM field emitter, and the multilayer PCB, as a receiver, in 1-m distance. For both cases, the simulated and calculated voltage couplings onto the multilayer PCB are in good agreement.

Broadband Generalized Sidelobe Canceler Beamforming Applied to Ultrasonic Imaging

A broadband generalized sidelobe canceler (Broadband-GSC) application for near-field beamforming is proposed. This approach is implemented in the wavelet domain. Broadband-GSC provides a set of complex, adapted apodization weights for each wavelet subband. The proposed method constrains interference and noise signal to improve the lateral resolution with only one single emission. Performance of the proposed beamforming is tested on simulated data obtained with Field II. Experiments have proved that the new beamforming can significantly increase the image quality compared with delay-and-sum (DAS) and synthetic aperture (SA). Imaging of scattering points show that Broadband-GSC improves the lateral resolution by 43.2% and 58.0% compared with SA and DAS, respectively. Meanwhile，Broadband-GSC reduces the peak sidelobe level by 11.6 dB and 26.4 dB compared with SA and DAS, respectively. Plane wave emission experiment indicates that Broadband-GSC can improve the lateral resolution by 44.2% compared with DAS. Furthermore, the new beamforming introduces the possibility for higher frame-rate and higher investigation depth with increased lateral resolution.

The multi-mode plane wave imaging in the Fourier domain: Theory and applications to fast ultrasound imaging of cracks

The Total Focusing Method (TFM) was generalized about ten years ago to form images with complex ultrasound paths involving reflections and mode conversions at the interfaces of a testing sample. The resulting multi-mode imaging allows to fully image the face of a crack-type defect. More recently, the Plane Wave Imaging (PWI) was revisited to perform multi-mode reconstructions with a small number of transmissions compared to the TFM. In order to further accelerate the imaging process, we propose here to combine plane wave emissions with a fast reconstruction algorithm in the Fourier domain. The method was developed in medical imaging with the pioneering works of J.- Y. Lu, and was studied in a recent paper to form images in solids with direct reconstruction modes. In the present paper, the theory is extended to various reconstruction modes (half-skip and one-skip modes with/without mode conversions), and the imaging method is evaluated with experimental results in a sample featuring different planar defects. We show that the method provides multi-mode images equivalent to those computed with the time-domain PWI, while reducing the computation times by a factor up to 13.

2-D and 3-D Reconstruction Algorithms in the Fourier Domain for Plane-Wave Imaging in Nondestructive Testing.

Time-domain plane-wave imaging (PWI) has recently emerged in medical imaging and is now taking to nondestructive testing (NDT) due to its ability to provide images of good resolution and contrast with only a few steered plane waves. Insonifying a medium with plane waves is a particularly interesting approach in 3-D imaging with matrix arrays because it allows to tremendously reduce the volume of data to be stored and processed as well as the acquisition time. However, even if the data volume is reduced with plane wave emissions, the image reconstruction in the time domain with a delay-and-sum algorithm is not sufficient to achieve low computation times in 3-D due to the number of voxels. Other reconstruction algorithms take place in the wavenumber-frequency (f-k) domain and have been shown to accelerate computation times in seismic imaging and in synthetic aperture radar. In this paper, we start from time-domain PWI in 2-D and compare it to two algorithms in the f-k domain, coming from the Stolt migration in seismic imaging and the Lu theory of limited diffraction beams in medical imaging. We then extend them to immersion testing configurations where a linear array is facing a plane water-steel interface. Finally, the reconstruction algorithms are generalized to 3-D imaging with matrix arrays. A comparison dwelling on image quality and algorithmic complexities is provided, as well as a theoretical analysis of the image amplitudes and the limits of each method. We show that the reconstruction schemes in the f-k domain improve the lateral resolution and offer a theoretical and numerical computation gain of up to 36 in 3-D imaging in a realistic NDT configuration.

Adaptive Multifocus Beamforming for Contrast-Enhanced-Super-Resolution Ultrasound Imaging in Deep Tissue

Contrast-enhanced-super-resolution ultrasound imaging, also referred to as ultrasound localization microscopy, can resolve vessels that are smaller than the diffraction limit and has recently been able to generate super-resolved vascular images of shallow in vivo structures in small animals. To fully translate this technology to the clinic, it is advantageous to be able to detect microbubbles at deeper locations in tissue while maintaining a short acquisition time. Current implementations of this imaging method rely on plane-wave imaging. This method has the advantage of maximizing the frame rate, which is important due to the large amount of frames required for super-resolution processing. However, the wide planar beam used to illuminate the field of view produces poor contrast and low sensitivity bubble detection. Here, we propose an "adaptive multifocus" sequence, a new ultrasound imaging sequence that combines the high frame rate feature of a plane wave with the increased bubble detection sensitivity of a focused beam. This sequence simultaneously sonicates two or more foci with a single emission, hence retaining a high frame rate, yet achieving improved sensitivity to microbubbles. In the limit of one target, the beam reduces to a conventional focused transmission; and for an infinite number of targets, it converges to plane-wave imaging. Numerical simulations, using the full-wave code, are performed to compare the point spread function of the proposed sequence to that generated by the plane-wave emission. Our numerical results predict an improvement of up to 15 dB in the signal-to-noise ratio. Ex vivo experiments of a tissue-embedded microtube phantom are used to generate super-resolved images and to compare the adaptive beamforming approach to plane-wave imaging. These experimental results show that the adaptive multifocus sequence successfully detects 744 microbubble events at 60 mm when they are undetectable by the plane-wave sequence under the same imaging conditions. At a shallower depth of 44 mm, the proposed adaptive multifocus method detects 6.9 times more bubbles than plane-wave imaging (1763 versus 257 bubble events).

Mapping the electrical activity of the heart in vivo using ultrafast acoustoelectric imaging

The heart is driven by an electrical activation that propagates in cells and triggers their concerted contraction. When this electrical activation pattern is altered, it can lead to debilitating diseases such as arrhythmia or heart failure. Yet, directly imaging the electrical activity of the heart remains difficult to achieve. We have recently introduced Ultrafast Acoustoelectric Imaging (UAI) that combines ultrasound plane wave emissions and the acoustoelectric effect, i.e., the modulation of electrical impedance by ultrasound waves, to map electrical current densities in real-time with 1-mm and 5-ms spatial and temporal resolutions, respectively. Herein, we present its application to direct mapping of the cardiac activation in isolated live rat hearts and in pig hearts in vivo. UAI was performed in isolated rat hearts (n = 4) and in open-chest pigs (n = 1) using a 5-MHz linear array ultrasound probe fitted to a 256 channel- Vantage ultrasound system (Verasonics, Inc., WA). Two electrodes positioned on the heart and fed to the Vantage system were used to detect electrical impedance variations caused by ultrasound plane waves, which were then backprojected to reconstruct images of electrical current densities. UAI images depicted the propagation of the electrical activation of the cardiac tissue as validated by the electrocardiogram. These first in-vivo results suggest that UAI may allow the emergence of new biomarkers for the diagnosis and pre-clinical study of cardiac activation diseases such as arrhythmias.

An integrated and highly sensitive ultrafast acoustoelectric imaging system for biomedical applications

Direct imaging of the electrical activation of the heart is crucial to better understand and diagnose diseases linked to arrhythmias. This work presents an ultrafast acoustoelectric imaging (UAI) system for direct and non-invasive ultrafast mapping of propagating current densities using the acoustoelectric effect.Acoustoelectric imaging is based on the acoustoelectric effect, the modulation of the medium’s electrical impedance by a propagating ultrasonic wave. UAI triggers this effect with plane wave emissions to image current densities. An ultrasound research platform was fitted with electrodes connected to high common-mode rejection ratio amplifiers and sampled by up to 128 independent channels. The sequences developed allow for both real-time display of acoustoelectric maps and long ultrafast acquisition with fast off-line processing. The system was evaluated by injecting controlled currents into a saline pool via copper wire electrodes. Sensitivity to low current and low acoustic pressure were measured independently. Contrast and spatial resolution were measured for varying numbers of plane waves and compared to line per line acoustoelectric imaging with focused beams at equivalent peak pressure. Temporal resolution was assessed by measuring time-varying current densities associated with sinusoidal currents. Complex intensity distributions were also imaged in 3D.Electrical current densities were detected for injected currents as low as 0.56 mA. UAI outperformed conventional focused acoustoelectric imaging in terms of contrast and spatial resolution when using 3 and 13 plane waves or more, respectively. Neighboring sinusoidal currents with opposed phases were accurately imaged and separated. Time-varying currents were mapped and their frequency accurately measured for imaging frame rates up to 500 Hz. Finally, a 3D image of a complex intensity distribution was obtained. The results demonstrated the high sensitivity of the UAI system proposed. The plane wave based approach provides a highly flexible trade-off between frame rate, resolution and contrast. In conclusion, the UAI system shows promise for non-invasive, direct and accurate real-time imaging of electrical activation in vivo.

Velocity Estimation in Medical Ultrasound [Life Sciences

This article describes the application of signal processing in medical ultrasound velocity estimation. Special emphasis is on the relation among acquisition methods, signal processing, and estimators employed. The description spans from current clinical systems for one-and two-dimensional (1-D and 2-D) velocity estimation to the experimental systems for three-dimensional (3-D) estimation and advanced imaging sequences, which can yield thousands of images or volumes per second with fully quantitative flow estimates. Here, spherical and plane wave emissions are employed to insonify the whole region of interest, and full images are reconstructed after each pulse emission for use in velocity estimation.

Full 3D dynamic functional ultrasound imaging of neuronal activity in mice

Introduction: In vivo neuronal activity imaging is key to understand the mechanisms of complex brain behavior. 2D Functional Ultrasound (fUS) Imaging is a powerful tool for measuring brain activation with high spatiotemporal sampling (80μm, 1 ms) using neurovascular coupling. Here, we demonstrated the proof of concept of in vivo full 3-D fUS and extend the research work toward 3D functional connectivity imaging in mice. Method: A fully programmable 1024-channel ultrasound platform was used to drive 32 x 32 matrix phased arrays (9 MHz central frequency) at ultrafast frame rates (500 volumes per second). Successive plane wave emissions were compounded to produce high sensitivity vascular volumetric images of the brain of anesthetized (Ketamine-Xylazine) and craniotomized mice. Whiskers were alternatively (6 seconds ON/OFF) stimulated during acquisition. Results: High-quality 3D images of cerebral blood volume were obtained and showed the feasibility of task-activated 3D fUS imaging. The activation maps depi...

Delay-Encoded Harmonic Imaging (DE-HI) in Multiplane-Wave Compounding.

The development of ultrafast ultrasound imaging brings great opportunities to improve imaging technologies such as shear wave elastography and ultrafast Doppler imaging. In ultrafast imaging, several tilted plane or diverging wave images are coherently combined to form a compounded image, leading to trade-offs among image signal-to-noise ratio (SNR), resolution, and post-compounded frame rate. Multiplane wave (MW) imaging is proposed to solve this trade-off by encoding multiple plane waves with Hadamard matrix during one transmission event (i.e. pulse-echo event), to improve image SNR without sacrificing the resolution or frame rate. However, it suffers from stronger reverberation artifacts in B-mode images compared to standard plane wave compounding due to longer transmitted pulses. If harmonic imaging can be combined with MW imaging, the reverberation artifacts and other clutter noises such as sidelobes and multipath scattering clutters should be suppressed. The challenge, however, is that the Hadamard codes used in MW imaging cannot encode the 2nd harmonic component by inversing the pulse polarity. In this paper, we propose a delay-encoded harmonic imaging (DE-HI) technique to encode the 2nd harmonic with a one quarter period delay calculated at the transmit center frequency, rather than reversing the pulse polarity during multiplane wave emissions. Received DE-HI signals can then be decoded in the frequency domain to recover the signals as in single plane wave emissions, but mainly with improved SNR at the 2nd harmonic component instead of the fundamental component. DE-HI was tested experimentally with a point target, a B-mode imaging phantom, and in-vivo human liver imaging. Improvements in image contrast-to-noise ratio (CNR), spatial resolution, and lesion-signal-to-noise ratio ( l SNR) have been achieved compared to standard plane wave compounding, MW imaging, and standard harmonic imaging (maximal improvement of 116% on CNR and 115% on l SNR as compared to standard HI around 55 mm depth in the B-mode imaging phantom study). The potential high frame rate and the stability of encoding and decoding processes of DE-HI were also demonstrated, which made DE-HI promising for a wide spectrum of imaging applications.