Pixel Array Detector Research Articles

Realization of a gas puff imaging system on the Wendelstein 7-X stellarator.

A system for studying the spatiotemporal dynamics of fluctuations in the boundary of the W7-X plasma using the "Gas-Puff Imaging" (GPI) technique has been designed, constructed, installed, and operated. This GPI system addresses a number of challenges specific to long-pulse superconducting devices, such as W7-X, including the long distance between the plasma and the vacuum vessel wall, the long distance between the plasma and diagnostic ports, the range of last closed flux surface (LCFS) locations for different magnetic configurations in W7-X, and management of heat loads on the system's plasma-facing components. The system features a pair of "converging-diverging" nozzles for partially collimating the gas puffed locally ≈135mm radially outboard of the plasma boundary, a pop-up turning mirror for viewing the gas puff emission from the side (which also acts as a shutter for the re-entrant vacuum window), and a high-throughput optical system that collects visible emission resulting from the interaction between the puffed gas and the plasma and directs it along a water-cooled re-entrant tube directly onto the 8 × 16 pixel detector array of the fast camera. The DEGAS 2 neutral code was used to simulate the Hα (656nm) and HeI (587nm) line emission expected from well-characterized gas-puffs of H2 and He and excited within typical edge plasma profiles in W7-X, thereby predicting line brightnesses used to reduce the risks associated with system sensitivity and placement of the field of view. Operation of GPI on W7-X shows excellent signal-to-noise ratios (>100 at 2 Mframes/s) over the field of view for minimally perturbing gas puffs. The GPI system provides detailed measurements of the two-dimensional (radial and poloidal) dynamics of plasma fluctuations in the W7-X edge and scrape-off layer and in and around the magnetic islands outside the LCFS that make up the island divertor configuration employed on W7-X.

Characterizing electron-collecting CdTe for use in a 77 ns burst-rate imager.

The Keck-PAD (pixel array detector) was developed at Cornell as a burst-rate imager capable of recording images from successive electron bunches (153 ns period) from the Advanced Photon Source (APS). Both Si and hole-collecting Schottky CdTe have been successfully bonded to this ASIC (application-specific integrated circuit) and used with this frame rate. The facility upgrades at the APS will lower the bunch period to 77 ns, which will require modifications to the Keck-PAD electronics to image properly at this reduced period. In addition, operation at high X-ray energies will require a different sensor material having a shorter charge collection time. For the target energy of 40 keV for this project, simulations have shown that electron-collecting CdTe should allow >90% charge collection within 35 ns. This collection time will be sufficient to sample the signal from one frame and prepare for the next. 750 µm-thick electron-collecting Schottky CdTe has been obtained from Acrorad and bonded to two different charge-integrating ASICs developed at Cornell, the Keck-PAD and the CU-APS-PAD. Carrier mobility has been investigated using the detector response to single X-ray bunches at the Cornell High Energy Synchrotron Source and to a pulsed optical laser. The tests indicate that the collection time will meet the requirements for 77 ns imaging.

Perspective of perovskite-based X-ray hybrid pixel array detectors

Compound semiconductors are playing a major role in the production of X-ray pixel detectors for the application in laboratories and beamlines at photon sources. The performance of these detectors has constantly been improved for the last decades but experiments are still limited by the properties of the detector material, especially under high flux illumination. The fast development of perovskite crystals opens the possibility for new materials to be used as highly efficient X-ray pixel detectors. The published data until now, of the transport properties, demonstrate the large potential of perovskite semiconductors. The achieved values are comparable with the ones of CdTe-based detectors. This paper presents potential perovskite-based detector materials and compares their performance with the state-of-the-art CdTe-based detectors. The perspectives of perovskite semiconductors are promising for the production of large area X-ray detectors but still some challenges remain.

Tamm-cavity terahertz detector

Efficiently fabricating a cavity that can achieve strong interactions between terahertz waves and matter would allow researchers to exploit the intrinsic properties due to the long wavelength in the terahertz waveband. Here we show a terahertz detector embedded in a Tamm cavity with a record Q value of 1017 and a bandwidth of only 469 MHz for direct detection. The Tamm-cavity detector is formed by embedding a substrate with an Nb5N6 microbolometer detector between an Si/air distributed Bragg reflector (DBR) and a metal reflector. The resonant frequency can be controlled by adjusting the thickness of the substrate layer. The detector and DBR are fabricated separately, and a large pixel-array detector can be realized by a very simple assembly process. This versatile cavity structure can be used as a platform for preparing high-performance terahertz devices and opening up the study of the strong interactions between terahertz waves and matter.

Application of AI Models for Determination of Beam Parameters with an Array of Timepix3 Pixel Detectors

Abstract PADME Run III searched for a resonant production of the X17 particle. The precise knowledge of the beam position is critical for the measurements of X17 and an array of 2 × 6 Timepix3 hybrid pixel detectors were used to measure the parameters of the incident positron beam. During the operation of the Timepix detector, some of the pixels reported missing data which introduced a challenge for the accurate estimation of the center position. A Neural Network Regression algorithm was developed and compared with the conventional Gaussian fitting technique over a simulated data with masked pixels.

Single-pixel Fresnel incoherent correlation holography compressed imaging using a Trumpet network

Fresnel incoherent correlation holography (FINCH) can achieve high-precision and non-scanning 3D imaging. However, as a holographic imaging technology, the huge bandwidth requirements and the amount of holographic data transmitted have always been one of the important factors limiting its application. In addition, the hardware cost of pixel array-based CCD or CMOS imaging is very high under high resolution or specific wavelength conditions. Accordingly, a single-pixel Fresnel incoherent correlation holography (SP-FINCH) compressed imaging method is proposed, which replaces pixel array detector with single-pixel detector and designs a Trumpet network to achieve low-cost and high-resolution imaging. Firstly, a modified FINCH imaging system is constructed and data acquisition is carried out using a single-pixel detector. Secondly, a Trumpet network is constructed to directly map the relationship between one-dimensional sampled data and two-dimensional image in an end-to-end manner. Moreover, by comparing the reconstructed images using neural network with that using commonly used single-pixel reconstruction methods, the results indicate that the proposed SP-FINCH compressed imaging method can significantly improve the quality of image reconstruction at lower sampling rate and achieve imaging without phase-shifting operation. The proposed method has been shown to be feasible and advantageous through numerical simulations and optical experiment results.

Investigation of fast and efficient lossless compression algorithms for macromolecular crystallography experiments.

Structural biology experiments benefit significantly from state-of-the-art synchrotron data collection. One can acquire macromolecular crystallography (MX) diffraction data on large-area photon-counting pixel-array detectors at framing rates exceeding 1000 frames per second, using 200 Gbps network connectivity, or higher when available. In extreme cases this represents a raw data throughput of about 25 GB s-1, which is nearly impossible to deliver at reasonable cost without compression. Our field has used lossless compression for decades to make such data collection manageable. Many MX beamlines are now fitted with DECTRIS Eiger detectors, all of which are delivered with optimized compression algorithms by default, and they perform well with current framing rates and typical diffraction data. However, better lossless compression algorithms have been developed and are now available to the research community. Here one of the latest and most promising lossless compression algorithms is investigated on a variety of diffraction data like those routinely acquired at state-of-the-art MX beamlines.

Development of Unmanned Remote System to Find Radiation Sources Based on 4π Gamma Imaging

A prototype system based on a combination of 4π sensitive gamma imaging and simultaneous localization and mapping (SLAM) was developed to find unknown radiation source(s) rapidly. The system consisted of a spherical visible camera, a three-dimensional light detection and ranging, a CdTe pixel array detector for 4π gamma imaging, a portable battery, and a control laptop personal computer; these were mounted on an unmanned vehicle. In a search area of 16 × 16 m2 with a height of 3 m, the prototype system successfully demonstrated the finding of a 137Cs point source with an activity of 0.67 MBq in the surrounding thin walls.

Submillisecond in situ X-ray diffraction measurement system with changing temperature and pressure using diamond anvil cells at BL10XU/SPring-8.

Recently, there has been a high demand for elucidating kinetics and visualizing reaction processes under extreme dynamic conditions, such as chemical reactions under meteorite impact conditions, structural changes under nonequilibrium conditions, and in situ observations of dynamic changes. To accelerate material science studies and Earth science fields under dynamic conditions, a submillisecond in situ X-ray diffraction measurement system has been developed using a diamond anvil cell to observe reaction processes under rapidly changing pressure and temperature conditions replicating extreme dynamic conditions. The development and measurements were performed at the high-pressure beamline BL10XU/SPring-8 by synchronizing a high-speed hybrid pixel array detector, laser heating and temperature measurement system, and gas-pressure control system that enables remote and rapid pressure changes using the diamond anvil cell. The synchronized system enabled momentary heating and rapid cooling experiments up to 5000 K via laser heating as well as the visualization of structural changes in high-pressure samples under extreme dynamic conditions during high-speed pressure changes.

4D‐STEM Nanoscale Strain Analysis in van der Waals Materials: Advancing beyond Planar Configurations

Achieving nanoscale strain fields mapping in intricate van der Waals (vdW) nanostructures, like twisted flakes and nanorods, presents several challenges due to their complex geometry, small size, and sensitivity limitations. Understanding these strain fields is pivotal as they significantly influence the optoelectronic properties of vdW materials, playing a crucial role in a plethora of applications ranging from nanoelectronics to nanophotonics. Here, a novel approach for achieving a nanoscale‐resolved mapping of strain fields across entire micron‐sized vdW nanostructures using four‐dimensional (4D) scanning transmission electron microscopy (STEM) imaging equipped with an electron microscope pixel array detector (EMPAD) is presented. This technique extends the capabilities of STEM‐based strain mapping by means of the exit‐wave power cepstrum method incorporating automated peak tracking and K‐means clustering algorithms. This approach is validated on two representative vdW nanostructures: a two‐dimensional (2D) MoS2 thin twisted flakes and a one‐dimensional (1D) MoO3/MoS2 nanorod heterostructure. Beyond just vdW materials, the versatile methodology offers broader applicability for strain‐field analysis in various low‐dimensional nanostructured materials. This advances the understanding of the intricate relationship between nanoscale strain patterns and their consequent optoelectronic properties.

Improvement of ultra-small-angle XPCS with the Extremely Brilliant Source.

Recent technical developments and the performance of the X-ray photon correlation spectroscopy (XPCS) method over the ultra-small-angle range with the Extremely Brilliant Source (EBS) at the ESRF are described. With higher monochromatic coherent photon flux (∼1012 photons s-1) provided by the EBS and the availability of a fast pixel array detector (EIGER 500K detector operating at 23000 frames s-1), XPCS has become more competitive for probing faster dynamics in relatively dilute suspensions. One of the goals of the present development is to increase the user-friendliness of the method. This is achieved by means of a Python-based graphical user interface that enables online visualization and analysis of the processed data. The improved performance of XPCS on the Time-Resolved Ultra-Small-Angle X-ray Scattering instrument (ID02 beamline) is demonstrated using dilute model colloidal suspensions in several different applications.

Small-angle X-ray scattering in the era of fourth-generation light sources.

Recently, fourth-generation synchrotron sources with several orders of magnitude higher brightness and higher degree of coherence compared with third-generation sources have come into operation. These new X-ray sources offer exciting opportunities for the investigation of soft matter and biological specimens by small-angle X-ray scattering (SAXS) and related scattering methods. The improved beam properties together with the advanced pixel array detectors readily enhance the angular resolution of SAXS and ultra-small-angle X-ray scattering in the pinhole collimation. The high degree of coherence is a major boost for the X-ray photon correlation spectroscopy (XPCS) technique, enabling the equilibrium dynamics to be probed over broader time and length scales. This article presents some representative examples illustrating the performance of SAXS and XPCS with the Extremely Brilliant Source at the European Synchrotron Radiation Facility. The rapid onset of radiation damage is a significant challenge with the vast majority of samples, and appropriate protocols need to be adopted for circumventing this problem.

Dose-efficient scanning Compton X-ray microscopy

The highest resolution of images of soft matter and biological materials is ultimately limited by modification of the structure, induced by the necessarily high energy of short-wavelength radiation. Imaging the inelastically scattered X-rays at a photon energy of 60 keV (0.02 nm wavelength) offers greater signal per energy transferred to the sample than coherent-scattering techniques such as phase-contrast microscopy and projection holography. We present images of dried, unstained, and unfixed biological objects obtained by scanning Compton X-ray microscopy, at a resolution of about 70 nm. This microscope was realised using novel wedged multilayer Laue lenses that were fabricated to sub-ångström precision, a new wavefront measurement scheme for hard X rays, and efficient pixel-array detectors. The doses required to form these images were as little as 0.02% of the tolerable dose and 0.05% of that needed for phase-contrast imaging at similar resolution using 17 keV photon energy. The images obtained provide a quantitative map of the projected mass density in the sample, as confirmed by imaging a silicon wedge. Based on these results, we find that it should be possible to obtain radiation damage-free images of biological samples at a resolution below 10 nm.

Microscopic single-pixel polarimetry for biological tissue

Single-pixel imaging (SPI) is a computational imaging modality that reconstructs images from information collected with a single-pixel detector. Due to the relatively large bandwidth and cheap price of single-pixel detectors over pixel-array detectors, SPI has been demonstrated with great success in many imaging scenarios. In this work, we further extended SPI to microscopic Mueller-matrix polarimetry, which is capable of providing polarization-sensitive properties of biological tissue with a millimeter-size field of view and micrometer-size resolution. As a proof of concept, we applied polarimetry on normal and cancerous esophagus tissues from patients and reconstructed their Mueller matrices. Effects of depolarization, retardation, and diattenuation were also examined by decomposing Mueller matrices. We envision that the developed computational technique can bring new possibilities for both SPI and Mueller-matrix polarimetry.

High spatial resolution direct conversion amorphous selenium X-ray detectors with monolithically integrated CMOS readout

Recent progress in the field of micron-scale spatial resolution direct conversion X-ray detectors for high-energy synchrotron light sources serve applications ranging from nondestructive and noninvasive microscopy techniques which provide insight into the structure and morphology of crystals, to medical diagnostic measurement devices. Amorphous selenium (a-Se) as a wide-bandgap thermally evaporated photoconductor exhibits ultra-low thermal generation rates for dark carriers and has been extensively used in X-ray medical imaging. Being an amorphous material, it can further be deposited over large areas at room temperatures and at substantially lower costs as compared to crystalline semiconductors. To address the demands for a high-energy and high spatial resolution X-ray detector for synchrotron light source applications, we have thermally evaporated a-Se on a Mixed-Mode Pixel Array Detector (MM-PAD) Application Specific Integrated Circuit (ASIC). The ASIC format consists of 128 × 128 square pixels each 150 μm on a side. A 200 μm a-Se layer was directly deposited on the ASIC followed by a metal top electrode. The completed detector assembly was tested with 45 kV Ag and 23 kV Cu X-ray tube sources. The detector fabrication, performances, Modulation Transfer Function (MTF) measurements, and simulations are reported.

Background rates in several hard X-ray photon counting pixel array detectors

Background rates in several pixel array detectors are investigated with an eye toward using them with hard, >6 keV, X-rays in very low-rate experiments - e.g., at signal rates <0.1/s/cm2. Measured background event rates for a detector with an unshielded 0.75 mm thick CdTe sensor on the experimental floor at SPring-8 varied from 0.4/s/cm2 with a 6 keV lower-level discriminator (LLD) threshold to 0.2/s/cm2 with a 75 keV LLD threshold. The background for a detector with a 1 mm thick silicon sensor was smaller, ∼0.08/s/cm2 for a 3keV threshold dropping to ∼0.07/s/cm2 at a 17 keV threshold. These rates are dominated by terrestrial sources, such as gamma rays emitted from trace impurities in concrete, with only a small contribution, <0.01/s/cm2, from direct detection of cosmic ray muons (CRMs). 15 mm of Pb shielding reduces the measured rates to < 0.05/s/cm2 in CdTe and to < 0.02/s/cm2 in 1 mm silicon. Additional processing, “time slicing”, as may be used in low-rate experiments where backgrounds may be most problematic, is shown to reduce the background rates further, to < 0.004/s/cm2 with the silicon sensor, and to between 0.002 and 0.02/s/cm2 for CdTe, where the exact value for CdTe depends sensitively on the detector threshold, and the use of the retriggering and/or the use of dual discriminator thresholds. Background rates are presented as functions of discriminator threshold, shielding, and processing. We also discuss the magnitude of, and the correction for, the limitation of the detector dynamic range that can be introduced by the time slicing. Finally, we present one example where time slicing was used.

Interpreting macromolecular diffraction through simulation.

This chapter discusses the use of diffraction simulators to improve experimental outcomes in macromolecular crystallography, in particular for future experiments aimed at diffuse scattering. Consequential decisions for upcoming data collection include the selection of either a synchrotron or free electron laser X-ray source, rotation geometry or serial crystallography, and fiber-coupled area detector technology vs. pixel-array detectors. The hope is that simulators will provide insights to make these choices with greater confidence. Simulation software, especially those packages focused on physics-based calculation of the diffraction, can help to predict the location, size, shape, and profile of Bragg spots and diffuse patterns in terms of an underlying physical model, including assumptions about the crystal's mosaic structure, and therefore can point to potential issues with data analysis in the early planning stages. Also, once the data are collected, simulation may offer a pathway to improve the measurement of diffraction, especially with weak data, and might help to treat problematic cases such as overlapping patterns.

Jungfraujoch: hardware-accelerated data-acquisition system for kilohertz pixel-array X-ray detectors.

The JUNGFRAU 4-megapixel (4M) charge-integrating pixel-array detector, when operated at a full 2 kHz frame rate, streams data at a rate of 17 GB s-1. To operate this detector for macromolecular crystallography beamlines, a data-acquisition system called Jungfraujoch was developed. The system, running on a single server with field-programmable gate arrays and general-purpose graphics processing units, is capable of handling data produced by the JUNGFRAU 4M detector, including conversion of raw pixel readout to photon counts, compression and on-the-fly spot finding. It was also demonstrated that 30 GB s-1 can be handled in performance tests, indicating that the operation of even larger and faster detectors will be achievable in the future. The source code is available from a public repository.

Integration of filter membrane and Ca2Nb3O10 nanosheets for high performance flexible UV photodetectors

• We first report the integration of filter membrane and Ca 2 Nb 3 O 10 nanosheets UV photodetectors (FM@CNO UV PDs). • The FM@CNO PD shows high responsivity (0.08 AW −1 ), high detectivity (1.1 × 10 12 Jones), high UV/visible rejection ratio (3.86 × 10 3 ) and fast speed (0.12/1.24 ms) under 300 nm light illumination. • The FM@CNO PD exhibits excellent flexibility after many bending cycles. And the FM@CNO array device can be used as a pixel array detector for UV imaging. We report that the integration of filter membrane and Ca 2 Nb 3 O 10 nanosheets (FM@CNO) UV photodetector (UV PD) shows high performance and excellent flexibility. The Ca 2 Nb 3 O 10 nanosheets were prepared by a facile solid-state reaction and liquid exfoliation process. The Ca 2 Nb 3 O 10 nanosheets can be integrated into the pores of a filter membrane via a simple vacuum filtration method. The FM@CNO UV PD shows high performance under 300 nm light illumination at 5 V bias, including high responsivity (0.08 AW −1 ), high detectivity (1.1 × 10 12 Jones), high UV/visible rejection ratio (3.86 × 10 3 ) and fast speed (0.12/1.24 ms). Furthermore, the FM@CNO device exhibits excellent flexibility after many bending cycles. In addition, the FM@CNO array device was used as a pixel array detector for UV imaging. This work provides a novel approach to achieve high performance flexible PDs based on filter membrane and two dimensional materials.

Quantifying Dynamic Signal Spread in Real-Time High-Energy X-ray Diffraction

Measured intensity in high-energy monochromatic X-ray diffraction (HEXD) experiments provides information regarding the microstructure of the crystalline material under study. The location of intensity on an areal detector is determined by the lattice spacing and orientation of crystals so that changes in the heterogeneity of these quantities are reflected in the spreading of diffraction peaks over time. High temporal resolution of such dynamics can now be experimentally observed using technologies such as the mixed-mode pixel array detector (MM-PAD) which facilitates in situ dynamic HEXD experiments to study plasticity and its underlying mechanisms. In this paper, we define and demonstrate a feature computed directly from such diffraction time series data quantifying signal spread in a manner that is correlated with plastic deformation of the sample. A distinguishing characteristic of the analysis is the capability to describe the evolution from the distinct diffraction peaks of an undeformed alloy sample through to the non-uniform Debye–Scherrer rings developed upon significant plastic deformation. We build on our previous work modeling data using an overcomplete dictionary by treating temporal measurements jointly to improve signal spread recovery. We demonstrate our approach in simulations and on experimental HEXD measurements captured using the MM-PAD. Our method for characterizing the temporal evolution of signal spread is shown to provide an informative means of data analysis that adds to the capabilities of existing methods. Our work draws on ideas from convolutional sparse coding and requires solving a coupled convex optimization problem based on the alternating direction method of multipliers.