Pipette-tip Solid-phase Extraction Research Articles

Automated kapok fiber-based pipette-tip solid-phase extraction coupled with liquid chromatography-tandem mass spectrometry for rapid and sensitive analysis of tyrosine kinase inhibitors in plasma

This study delineates the development of a novel automated pipette-tip solid-phase extraction (SPE) methodology, employing kapok fiber as a naturally efficient and cost-effective adsorbent for the selective extraction of eleven tyrosine kinase inhibitors (TKIs) from plasma. The uniqueness of this method lies in its assembly, where kapok fibers are ingeniously wrapped around a stainless-steel spring within the pipette tip, ensuring an obstruction-free central space for effortless solution aspiration and dispensation. This design significantly minimizes backpressure, enhancing operational efficiency and ensuring compatibility with pipettors, including the implementation of an electric pipettor to streamline the sample preparation process and facilitate automation. The method's analytical performance, rigorously validated through liquid chromatography-tandem mass spectrometry, exhibits outstanding linearity in ranges of 0.1/0.5–200 ng mL-1 (R² > 0.993), commendable accuracy (86.3%–114.8%), and consistent precision (3.4–11.3%), alongside remarkably low detection limits that span from 0.024 to 0.130 ng mL-1. The assembly of kapok fiber within the pipette tip, in this unique configuration, results in a practical, cost-effective, eco-friendly, and automated pipette-tip SPE method. This innovation signifies a significant advancement in bioanalytical methodologies, offering an efficient and sustainable approach for extracting analytes from complex biological samples. This process notably enhances both the sensitivity and selectivity of subsequent instrumental analyses.

Enhanced detection of catecholamines in human urine using Cis-diol-microporous organic networks with PT-SPE and HPLC-MS/MS

A novel cis-diol-microporous organic networks (MONs-2OH) material was synthesized via room temperature and Sonogashira coupling reactions, which exhibits exceptional adsorption properties for catecholamines (CAs). MONs-2OH demonstrates robust hydrogen bonding and π-π stacking interactions, crucial for effective adsorption. The MONs-2OH was incorporated into pipette tip solid-phase extraction and developed a new method for detecting CAs in human urine using HPLC-MS/MS. Characterization of the adsorbent revealed its high stability, large specific surface area, abundant phenolic hydroxyl groups, rapid extraction speed, and superior adsorption efficiency. The method achieved a wide linear range (0.5–500 ng/mL), low detection limits (0.06–0.26 ng/mL), high accuracy (90.4 %-99.4 %), and excellent precision (RSD ≤ 10 %). Comparative studies showed MONs-2OH outperforms commercial adsorbents in terms of recovery and adsorption capacity. The results underscore the potential of MONs-2OH for rapid and sensitive CAs determination, offering significant advantages for the auxiliary diagnosis of depression and enhancing the application of PT-SPE in sample pretreatment.

Preparation and evaluation of polymeric ionic liquid functionalized microparticles as the efficient adsorbent for pipette tip solid phase extraction of sulfonamides

Sulfonamides (SAs) residues are commonly found in environmental samples, which is highly concerning for public safety and environmental protection. The detection of SAs is quite important but challenging. In this work, a kind of polymeric ionic liquid functionalized microparticles (PIL-FM) was synthesized via a simple free radical polymerization reaction, and applied as the adsorbent for pipette tip solid phase extraction (PT-SPE) of three SAs from river water, milk powder and honey samples. The adsorption performance of PIL-FM on SAs were evaluated using adsorption kinetics and adsorption isotherms, and the results showed that PIL-FM had the best selectivity for SMZ with the maximum adsorption capacity was as high as 45.05 mg·g−1. The extraction process was optimized and the adsorption mechanism was preliminarily discussed. PIL-FM has the excellent selectivity for SAs mainly because of the strong π-π interaction, and the electrostatic repulsion between them in the elution step also has a positive impact. Under optimal conditions, combined with HPLC, this PT-SPE method had wide linearity (0.2–100 μg·L−1, R2 ≥ 0.9998) and low limits of detection (0.06–0.08 μg·L−1). The intra-day and inter-day repeatability were found to be 3.7 %–4.6 % and 4.5 %–6.2 %, respectively. The suggested PT-SPE method is simple, low cost, rapid, and efficient to extract SAs, and can be applied for the monitoring of SAs residues in the aquatic environment and in food.

Surface amphiphilic hybrid porous polymers based on cage-like organosiloxanes for pipette tip solid-phase extraction of microcystins in water

The occurrence of microcystins (MCs) during harmful algal blooms (HABs) represents a major threat to freshwater environments. In this work, a novel surface amphiphilic hybrid porous polymers based on cage-like organosiloxanes (PCSs) was prepared for the enrichment of MCs. The copolymerization of bifunctional amphiphilic monomers, 2-methacryloyloxyethyl phosphorylcholine (MPC) and N-benzylquininium chloride (BQN), with the cross-linker methacryl substituted polyhedral oligomeric silsesquioxane (POSS) was achieved in an ionic liquid-based porogenic medium. The hierarchical porous structure, a variety of surface functional groups and weak hydrophilicity were well characterized on the prepared materials using scanning electron microscopy, nitrogen adsorption/desorption analysis, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, zeta potential analysis and water contact angle testing, respectively. The as-prepared surface amphiphilic PCSs was used as an adsorbent for pipette tip solid-phase extraction (PT-SPE) to enrich microcystins (MCs) from surface waters before their analysis by capillary electrochromatography (CEC) and liquid chromatography-mass spectrometry (LC-MS). Under the optimal conditions, the established PT-SPE-LC-MS method exhibited a wide linear range (10–10,000 ng L−1), low limits of detection (4.0–8.0 ng L−1) and satisfactory recoveries (89.5–102.8 %) for MCs. An adsorption mechanism involving electrostatic interactions, hydrogen bonding, hydrophilic interactions, and π-π stacking has been proposed. The findings suggest that the use of surface amphiphilic PCSs materials as adsorbents in the PT-SPE platform facilitates efficient enrichment of MCs for subsequent chromatographic analysis. These investigations offer a new perspective on the simple and uncomplicated pretreatment of complex environmental samples.

Pipette-tip solid-phase extraction coupled with matrix-assisted laser desorption/ionization mass spectrometry enables rapid and high-throughput analysis of antidepressants in rat serum.

Therapeutic drug monitoring is essential for ensuring the efficacy and safety of medications. This study introduces a streamlined approach that combines pipette-tip solid-phase extraction (PT-SPE) with matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS), facilitating rapid and high-throughput monitoring of drug concentrations. As a demonstration, this method was applied to the extraction and quantification of antidepressants in serum. Utilizing Zip-Tip C18, the method enabled the extraction of antidepressants from complex biological matrices in less than 2min, with the subsequent MALDI-MS analysis yielding results in just 1min. Optimal extraction recoveries were achieved using a sampling solution at pH 9.0 and a 10 μL ethanol desorption solution containing 0.1% phosphoric acid. For MALDI analysis, 2,5-dihydroxybenzoic acid was identified as the most effective matrix for producing the highest signal intensity. The quantification strategy exhibited robust linearities (R2 ≥ 0.997) and satisfactory limits of quantification, ranging from 0.05 to 0.5 μg/mL for a suite of antidepressants. The application for monitoring dynamic concentration changes of antidepressants in rat serum emphasized the method's efficacy. This strategy offers the advantages of high throughput, minimal sample usage, environmental sustainability, and simplicity, providing ideas and a reference basis for the subsequent development of methods for therapeutic drug monitoring.

MonoTip C18 pipette tip solid-phase extraction coupled with liquid chromatography-tandem mass spectrometry enables rapid and automated therapeutic drug monitoring of tyrosine kinase inhibitors

This work presents an advanced automated monolithic C18 pipette-tip solid-phase extraction (PT-SPE) method seamlessly integrated with liquid chromatography-tandem mass spectrometry (LC-MS/MS) for precise therapeutic drug monitoring of eleven tyrosine kinase inhibitors (TKIs) in biological samples. Commercially available MonoTip C18 columns facilitate superior extraction efficiency and selectivity from complex biological matrices owing to their large surface areas and enhanced mass transfer capabilities. The sample preparation process, conducted by aspirating and dispensing solutions using a pipettor, completes the overall extraction process within 3 min. The method validation demonstrated excellent linearity within the range of 0.2/0.5/0.8 to 200 ng/mL, with detection limits ranging from 0.049 to 0.206 ng/mL. The method exhibited outstanding accuracy and precision, with intraday relative recovery rates ranging from 96.3 % to 115.0 % and interday recovery rates ranging from 95.0 % to 115.7 %, with coefficient of variation values consistently below 13.8 %. The proposed method is distinguished by its exceptional efficiency, reduced solvent use, enhanced environmental sustainability, and streamlined automation—key advantages in the realm of clinical therapeutic drug monitoring of TKIs. Overall, the MonoTip C18 PT-SPE technique, coupled with LC-MS/MS, offers a formidable, eco-friendly, and effective strategy for the TDM of TKIs, marking a significant advancement in the field.

Advances and Applications of Hybrid Graphene-Based Materials as Sorbents for Solid Phase Microextraction Techniques.

The advancement of traditional sample preparation techniques has brought about miniaturization systems designed to scale down conventional methods and advocate for environmentally friendly analytical approaches. Although often referred to as green analytical strategies, the effectiveness of these methods is intricately linked to the properties of the sorbent utilized. Moreover, to fully embrace implementing these methods, it is crucial to innovate and develop new sorbent or solid phases that enhance the adaptability of miniaturized techniques across various matrices and analytes. Graphene-based materials exhibit remarkable versatility and modification potential, making them ideal sorbents for miniaturized strategies due to their high surface area and functional groups. Their notable adsorption capability and alignment with green synthesis approaches, such as bio-based graphene materials, enable the use of less sorbent and the creation of biodegradable materials, enhancing their eco-friendly aspects towards green analytical practices. Therefore, this study provides an overview of different types of hybrid graphene-based materials as well as their applications in crucial miniaturized techniques, focusing on offline methodologies such as stir bar sorptive extraction (SBSE), microextraction by packed sorbent (MEPS), pipette-tip solid-phase extraction (PT-SPE), disposable pipette extraction (DPX), dispersive micro-solid-phase extraction (d-µ-SPE), and magnetic solid-phase extraction (MSPE).

Development of Al-MOF based pipette-tip solid-phase extraction approach for detection of fluoroquinolones in animal innards

Residues of fluoroquinolones (FQs) have been identified as a threat to food safety, highlighting the need for effective detection methods in food samples. This study utilized a hydrothermal synthesis method to create Al-based metal-organic framework (Al-MOF) for pipette-tip solid-phase extraction of FQs in food matrices. Coupled with HPLC-FLD, a novel sample pretreatment method for simultaneous detection of three FQs was developed, demonstrating good linearity (1−500 ng/g) with R2 values ranging from 0.9990 to 0.9998. Limits of detection and quantification were found to be 0.15−0.25 ng/g and 1.0−2.0 ng/g, respectively, with the relative standard deviations below 9.3 %. The extraction method showed promising results in animal liver and kidney samples, with a recovery rate of 75.2−103.6 %. Overall, this simple, rapid, and efficient method offers a valuable approach for analyzing trace levels of FQs in complex matrices.

OLIVE PITS-BASED CARBON BLACK AGGLOMERATE AS AN ADSORBENT FOR PIPETTE-TIP SOLID-PHASE EXTRACTION FOR THE DETERMINATION OF CAFFEINE IN ENERGY DRINKS

Vegetal wastes are an interesting source for the synthesis of nanostructured carbon materials, which are potentially useful in various applications. Carbon black agglomerates (CBA) obtained from olive pits, synthesized in our previous research, had a low crystalline structure typical of this type of materials, with a pore size of 2.27 nm, confirming their micro/mesoporous structure, and with a high surface value of around 587 m2/g. These materials were used for the extraction of caffeine in energy drinks using a green-approach micro-sample technique called pipette-tip solid-phase extraction. This microextraction technique features reduced consumption of organic solvents, of the amount of sorbent and extraction time, thus making the whole sample pretreatment process faster and greener. In this work, we proposed an analytical method for the analysis of caffeine in commercial energy drinks, using CBA with a great extraction capacity due to its high porous surface area. The developed methodology has proven to be useful from a green chemistry point of view, using only one milligram of nanostructured sorbent, minimal solvent consumption, a reduced volume of sample, as well as easy and rapid automatization for the analysis of commercial energy drinks. For the quantification of the analyte in the energy drinks, a one-point standard addition calibration was applied to correct the matrix effect. Similar caffeine concentrations per milliliter were found in the three analyzed samples, likewise, the amounts of caffeine close to those reported by the manufacturers were established for two of the samples analyzed.

Fabrication of fluorinated triazine-based covalent organic frameworks for selective extraction of fluoroquinolone in milk

A novel fluorinated triazine-based covalent organic frameworks (F-CTFs) was designed and synthesized by using melamine and 2,3,5,6-tetrafluoroterephthalaldehydeas as organic ligands for selective pipette tip solid-phase extraction (PT-SPE) of amphiphilic fluoroquinolones (FQs). The competitive adsorption experiment and mechanism study were carried out and verified that this F-CTFs possesses favorable adsorption affinity for FQs. The abundant fluorine affinity sites endowed the F-CTFs high selectivity to FQs extraction through F-F interactions. The adsorption capacity of F-CTFs can reach up to 109.1 mg g−1 for enrofloxacin. The detailed characterization of the F-CTFs adsorbent involved the application of various techniques to examine its morphology and structure. Under optimized conditions, a method combining F-CTF-based PT-SPE with high-performance liquid chromatography (PT-SPE-HPLC) was established, which exhibited a broad linear range, excellent precision, and an impressively low limit of detection, and could be used for the determination of six FQs in milk, with LODs as low as 0.0010 μg mL−1. The recovery rates during extraction varied between 92.1% and 111.4%, exhibiting RSDs below 6.8% at different spiked concentrations.

The Application of Pipette-Tip and Magnetic Dummy-Template Molecularly Imprinted Solid-Phase Extraction Coupled with High-Performance Liquid Chromatography with Diode Array and Spectrofluorimetric Detection for the Determination of Coumarins in Cosmetic Samples

In this study, adsorbents based on molecularly imprinted polymers (MIPs) in two solid-phase extraction application forms, pipette tip and magnetic extraction, were used for the selective extraction of coumarins. The pipette-tip solid-phase extraction reduced solvent volumes; the magnetic MIP extraction was simple and effective for phase separation. Parameters affecting extraction, such as the amount of adsorbent, type of washing solvent, volume of the elution solvent, and extraction times for magnetic extraction, were optimized. The MIP-based adsorbents displayed high selectivity and extraction efficiency, resulting in recoveries ranging from 70.3 to 102.0% (RSD % less than 5.5%) for five coumarins under study, 6,7-dihydroxycoumarin-6-β-D-glucoside, coumarin, 7-methoxycoumarin, 6-methylcoumarin, and dicoumarol. The extracts were analyzed by high-performance liquid chromatography with diode array (DAD) and fluorescence (FLD) detectors, reaching limits of quantification of 0.5 and 0.9 µg·mL−1 for coumarin and dicoumarol detected by DAD and 0.001–0.012 µg·mL−1 for the other prohibited simple coumarins when used as a fragrance (detected by FLD). The proposed method was validated and its applicability was shown for the analysis of cosmetic samples like shower gel and perfume.

Determination of alectinib and its active metabolite in plasma by pipette-tip solid-phase extraction using porous polydopamine graphene oxide adsorbent coupled with high-performance liquid chromatography-ultraviolet detection

Alectinib is known as an effective targeted drug, which has excellent therapeutic effect on non-small cell lung cancer and can significantly prolong the survival of patients. Therapeutic drug monitoring is necessary due to the photo-instability of alectinib and the individual differences in patients. In this work, a porous polydopamine graphene oxide composite (PDAG) was prepared by a simple surface modification method. A PDAG-based pipette-tip solid-phase extraction (PT-SPE) coupled with HPLC-UV detection was proposed for the separation and detection of alectinib and its active metabolite M4 in plasma. The method was methodologically validated and showed good linearity in the range of 50–5000 ng mL−1 (R2 > 0.9995). The limit of detection (LOD) was 4.8 ng mL−1 and 3.9 ng mL−1 for alectinib and M4, respectively, and the limit of quantitation (LOQ) was 16.1 ng mL−1 and 13.1 ng mL−1, respectively. The intra-day and inter-day precision expressed by coefficient of variation was less than 4.8 %. The recovery of this method ranged from 84.9 % to 103.5 % with a standard deviation of less than 4.3 %. In conclusion, the established method is accurate, stable and inexpensive, and can be used to monitor the levels of alectinib and M4 in plasma, which provide technical and data support for exploring optimal individualized remedial dosing regimens.

Adaptive polarity of graphene oxide anchored silica doped with C18 for effective enrichment of aflatoxins from foodstuff

Selecting adsorbent with appropriate polarity is a practicable way to improve the enrichment efficiency for aflatoxins (AFs) during the solid phase extraction in sample pretreatment. In this study, graphene oxide anchored silica was prepared and applied to dop with C18 with suitable polarity for effective pre-concentration and purification of AFs from foodstuff. With systematic optimizing, GO anchored silica/C18 (1/1, w/w) exhibited excellent extraction performance for AFs. As the medium, a facile and efficient pipette-tip solid-phase extraction (PT-SPE) technique was developed for enrichment of AFs. Coupling with high-performance liquid chromatography fluorescence detection (HPLC-FLD), the developed analysis method illustrated the lower limits of detection of 0.075 ng/g and 0.17 ng/g for AFG2, AFB2 and AFG1, AFB1 (R2 > 0.99). The recoveries were calculated as 71.27 ∼ 94.52 % for the spiking level of 1, 5, and 20 ng/g with the intra-day and inter-day precision of 1.30 to 4.01 and 3.56 to 5.78, respectively. Hence, the developed PT-SPE-HPLC-FLD determination method was sensitive, accurate, and convenient for quantitative analysis of AFs at trace contents in foodstuff.

Mechanochemical synthesis ionic covalent organic frameworks/cotton composites for pipette tip solid-phase extraction of domoic acid in seafood

Pipette tip solid-phase extraction (PT-SPE) as a miniaturized solid-phase extraction technique have a wide range of applications in the field of sample pretreatment. In this study, ionic covalent organic frameworks@cotton (iCOF@cotton) were facilely synthesized by mechanochemical grinding method only in half an hour, and used as the adsorbents of PT-SPE. The synthesized iCOF@cotton not only had high specific surface area, suitable pore structure and cationic charge groups of iCOF that can extract polar targets quickly, but also reduced the problem of high back pressure of PT-SPE by the addition of cotton, thus accelerating extraction time. Combined with high performance liquid chromatographic tandem mass spectrometry (HPLC-MS/MS), an efficient and sensitive method was established for detection of domoic acid (DA, a toxin produced by algae). Under the optimal conditions, the proposed analysis method displayed excellent analytical performance, including broad range of linearity (10–1000 pg mL−1), low limit of detection (LOD, 5 pg mL−1), high correlation coefficient (0.9993), satisfactory precision (RSDs ≤6.4 %). In addition, the developed method was applied to the detection of DA in marine samples, and detected trace DA (18.6 pg mL−1) with satisfactory recovery (85.7%–107.2 %). The above results indicated that the prepared iCOF@cotton have great potential as the adsorbents for PT-SPE.

Simultaneous determination of three biomarkers of non-small cells lung cancer in urine by pipette-tip solid-phase extraction coupled with liquid chromatography tandem mass spectrometry

Simultaneous determination of multiple biomarkers can improve the effectiveness and accuracy of cancer diagnosis. Cortisol, cortisone, and 4-methoxyphenylacetic acid (4-Me) are metabolic biomarker group with high specificity and sensitivity for the diagnosis of non-small cells lung cancer (NSCLC), and the development of their simultaneous determination method is desired. Herein, a simple, sensitive, and low-cost method involving pipette-tip solid-phase extraction (PT-SPE) using anion exchange adsorbent (MAX) coupled with liquid chromatography tandem mass spectrometry (LC-MS/MS) was developed for the simultaneous determination of three biomarkers (cortisol, cortisone, and 4-Me) in human urine. The sample (0.1 mL), adsorbent (1.5 mg) and organic reagent (3.5 mL) of MAX-PT-SPE are less consumed, and have the advantages of easy access to raw materials, simple assembly, convenient on-site instant extraction, low pollution, and low cost. The limits of detection of the three biomarkers were 0.006-0.024 ng mL-1, the recoveries of three spiked levels (2, 50, and 500 ng mL-1) were 91.0%-99.3%, with the relative standard deviations (RSDs) ≤ 5.9%. Finally, the MAX-PT-SPE-LC-MS/MS method achieved the quantitative analysis of cortisol, cortisone, and 4-Me in urine of different patients of NSCLC. This method is expected to be used in the non-invasive auxiliary diagnosis of NSCLC, and it provides a new strategy for multi-molecular diagnosis and multi-omics combined diagnosis.

Preparation and evaluation of a tryptophan based hypercrosslinked porous polymer as an efficient adsorbent for pipette tip solid-phase extraction of sulfonamides

A novel tryptophan-based porous polymer is designed and synthesized via a facile one-step hypercrosslinking polymerization process, and applied as sorbent for extraction of trace sulfonamides in foodstuffs. The developed polymer has high surface area, large conjugate system, and abundant functional groups (e.g., π-π stacking, hydrogen bonding, hydrophobic and electrostatic attraction interactions), which endow it with superior affinity and high adsorption capacity for sulfonamides (16.16–59.29 mg g−1). The optimized SPE method is coupled with HPLC-DAD to create a sensitive and efficient protocol that provides good linearity (R2 ≥ 0.9979), low limits of detection, satisfactory recoveries (92.5–109.5 %) and high precisions (RSDs < 8.24). In addition, the newly proposed method greatly reduces the amount of adsorbent (2.0 mg) and organic solvent (2.0 mL) used. Adsorption kinetics, isotherms, and simulation calculations studies further reveal the presence of monolayer adsorption, chemical adsorption process, and multiple interactions. Thus, this work presents a polymer capable of multiple interactions for the pretreatment of trace sulfonamides in foodstuffs.

Metal-organic frameworks modified melamine foam in pipette-tip for rapid solid-phase extraction of organophosphorus pesticides in fruits and vegetables.

In this work, metal-organic frameworks (MOFs) including Fe-MIL-101 and Ti-MIL-125 were prepared and fixed on the melamine foam (MF) by polyvinylidene fluoride (PVDF) to prepare MF/PVDF/MOFs, which was used as adsorbents in pipette-tip solid-phase extraction (PT-SPE) for rapid extraction of organophosphorus pesticides (OPPs). Then, a gas chromatograph-flame thermionic detector (GC-FTD) was used for simultaneous analysis of Dimethoate (DMT), Iprobenfos (IBF), Parathion-methyl (PAM), and Chlorpyrifos (CPF). The morphology, crystal structure, and functional groups of MF/PVDF/MOFs were characterized, indicating that Ti-MIL-125 and Fe-MIL-101 were successfully synthesized and distributed on MF. The Fe-MIL-101 and Ti-MIL-125 showed good extraction ability for OPPs, which was mainly due to the π-π interaction and the multiple porous structures. Under the optimal conditions, the limit of detection (LODs) of four OPPs was 0.03-0.14μg L-1 and the RSDs were less than 9.9%. The developed PT-SPE method showed a short extraction time (<3min). The recoveries in fruits and vegetables (Celery, cabbages, and oranges) ranged from 75.3%-118.8% (RSDs<9.6%). The prepared MF/PVDF/MOFs demonstrated the efficient extraction performance of OPPs, contributing to the rapid pretreatment of OPPs from food and the environment.

Synthesis of azo-linked covalent organic polymers for pipette tip solid-phase extraction of sedative residues from animal tissues samples.

Azo-linked covalent organic polymers (ACOPs) were synthesized by a simple azo reaction, with 2,2'-bis(trifluoromethyl)benzidine and 1,3,5-trihydroxybenzene as the monomers. The preparation process was mild, green, and environmental-friendly, avoiding the use of high temperature, metal catalysis, and harmful organic reagent. The obtained ACOPs were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis, powder X-ray diffraction, and Brunauer-Emmett-Teller. With the prepared ACOPs as adsorbent, a method of pipette tip solid-phase extraction-liquid chromatography-tandem mass spectrometry detection (PTSPE-LC-MS/MS) was proposed for the analysis of target sedatives in animal tissues. Furthermore, the parameters for the extraction of five sedatives, including the amount of adsorbent, pH value, ion strength, elution solvent and volume, were investigated. Under the optimized conditions, the linear dynamic range was found from 0.1 to 10.0μg kg-1, and the limits of detection were ranged from 0.02 to 0.1μg kg-1. The method was assessed by the analysis of target sedatives in animal tissues, and the recoveries for the spiked pork muscle and pork liver samples were 84-102% and 83-101%, respectively. The results show that the developed method of PTSPE-LC-MS/MS with ACOPs as adsorbent is efficient for the analysis of trace sedatives in animal tissues.

Determination of Benzimidazoles in Chicken and Egg Samples by Urea-Based Covalent Organic Polymer (UCOP) Pipette Tip–Solid-Phase Extraction (PT–SPE) and High-Performance Liquid Chromatography–Tandem Mass Spectrometry (HPLC–MS)

A urea-based covalent organic polymer (UCOP), was synthesized using 1,4-phenylene diisocyanate (PPDI) and 4,4′,4″-(1,3,5-triazine-2,4,6-triyl) trianiline (TTTA) and characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and nitrogen adsorption-desorption isotherm analysis. The prepared material was employed as an adsorbent for pipette tip–solid-phase extraction (PT–SPE) for benzimidazoles before high-performance liquid chromatography–tandem mass spectrometry analysis (HPLC–MS). The parameters affecting the isolation efficiency, including salt concentration, sample pH, mass of adsorbent, and types and volumes of eluent, were optimized. Using these conditions, PT–SPE provided good linearity from 0.1 to 10 μg kg−1 with low limits of detections (LODs) of 0.02 μg kg−1 together with good precision (relative standard deviations from 4.2 to 8.3%) and accuracy (recoveries from 76.2 to 84.8%). The results demonstrate that the urea-based covalent organic polymer has the potential for the enrichment of trace benzimidazoles.

Preparation of acidity-sensitive N-isopropylacrylamide and methacrylic acid copolymer monolithic column for the pipette tip solid phase extraction of phenols

An acidity-sensitive poly(N-isopropylacrylamide-methyl acrylic acid-co-divinyl- benzene) monolith was prepared in situ in a pipette tip for solid phase extraction of phenol, m-cresol, o-nitrophenol, 2,4-dichlorophenol and p-tert-butylphenol. The monolith was characterized by FT-IR, BET (surface area = 266.56 m2/g) and thermogravimetric analysis (thermally stable up to 350 °C). The introduction of methyl acrylic acid enhanced the stability in the strong alkaline condition. The adsorption experiments and density function theory calculations indicated NIPAM was the main adsorption sites and the adsorption mechanism of phenol on the monolith was hydrophobic interaction, H-bond interaction, C − H···π interaction of isopropyl group of NIPAM with the phenyl group of phenols. Based on these features and under the optimal extraction conditions, a pipette tip solid phase extraction coupled to high-performance liquid chromatography with ultraviolet detection method was developed for the determination of 5 phenols in the diffusion of polycarbonate cups. Due to the usage of 0.1 M NaOH as the eluent, the method presented selectivity for phenols based on the acidity-sensitive of the monolith. Wide linear range (0.6–200 µg/L), low detection limits (0.2–0.3 µg/L), good reproducibility (%RSD less than 9.8%) and satisfactory recoveries (86.3–114.1%) were obtained. The proposed method was suitable for quantitative analysis of phenollic in water samples.