Pilin Structural Gene Research Articles

Production of the Escherichia coli common pilus by uropathogenic E. coli is associated with adherence to HeLa and HTB-4 cells and invasion of mouse bladder urothelium.

Uropathogenic Escherichia coli (UPEC) strains cause urinary tract infections and employ type 1 and P pili in colonization of the bladder and kidney, respectively. Most intestinal and extra-intestinal E. coli strains produce a pilus called E. coli common pilus (ECP) involved in cell adherence and biofilm formation. However, the contribution of ECP to the interaction of UPEC with uroepithelial cells remains to be elucidated. Here, we report that prototypic UPEC strains CFT073 and F11 mutated in the major pilin structural gene ecpA are significantly deficient in adherence to cultured HeLa (cervix) and HTB-4 (bladder) epithelial cells in vitro as compared to their parental strains. Complementation of the ecpA mutant restored adherence to wild-type levels. UPEC strains produce ECP upon growth in Luria-Bertani broth or DMEM tissue culture medium preferentially at 26°C, during incubation with cultured epithelial cells in vitro at 37°C, and upon colonization of mouse bladder urothelium ex vivo. ECP was demonstrated on and inside exfoliated bladder epithelial cells present in the urine of urinary tract infection patients. The ability of the CFT073 ecpA mutant to invade the mouse tissue was significantly reduced. The presence of ECP correlated with the architecture of the biofilms produced by UPEC strains on inert surfaces. These data suggest that ECP can potentially be produced in the bladder environment and contribute to the adhesive and invasive capabilities of UPEC during its interaction with the host bladder. We propose that along with other known adhesins, ECP plays a synergistic role in the multi-step infection of the urinary tract.

Mucin inhibitsPseudomonas aeruginosabiofilm formation by significantly enhancing twitching motility

In Pseudomonas aeruginosa, type IV pili (TFP)-dependent twitching motility is required for development of surface-attached biofilm (SABF), yet excessive twitching motility is detrimental once SABF is established. In this study, we show that mucin significantly enhanced twitching motility and decreased SABF formation in strain PAO1 and other P. aeruginosa strains in a concentration-dependent manner. Mucin also disrupted partially established SABF. Our analyses revealed that mucin increased the amount of surface pilin and enhanced transcription of the pilin structural gene pilA. Mucin failed to enhance twitching motility in P. aeruginosa mutants defective in genes within the pilin biogenesis operons pilGHI/pilJK-chpA-E. Furthermore, mucin did not enhance twitching motility nor reduce biofilm development by chelating iron. We also examined the role of the virulence factor regulator Vfr in the effect of mucin. In the presence or absence of mucin, PAOΔvfr produced a significantly reduced SABF. However, mucin partially complemented the twitching motility defect of PAOΔvfr. These results suggest that mucin interferes with SABF formation at specific concentrations by enhancing TFP synthesis and twitching motility, that this effect, which is iron-independent, requires functional Vfr, and only part of the Vfr-dependent effect of mucin on SABF development occurs through twitching motility.

PpdD type IV pilin of Escherichia coli K-12 can Be assembled into pili in Pseudomonas aeruginosa.

Escherichia coli K-12 possesses at least 16 chromosomal genes related to genes involved in the formation of type IV pili in other gram-negative bacteria. However, E. coli K-12 does not produce type IV pili when grown under standard laboratory conditions. The results of reverse transcription-PCR, operon fusion analysis, and immunoblotting demonstrated that several of the putative E. coli piliation genes are expressed at very low levels. Increasing the level of expression of the major pilin gene (ppdD) and the linked assembly genes hofB and hofC (homologues of the Pseudomonas aeruginosa type IV pilus assembly genes pilB and pilC) did not lead to pilus production. However, expression of the ppdD gene in P. aeruginosa led to assembly of PpdD into pili that were recognized by antibodies directed against the PpdD protein. Assembly of PpdD into pili in P. aeruginosa was dependent on the expression of the pilB and pilC genes and independent of expression of the P. aeruginosa pilin structural gene pilA.

Pseudomonas aeruginosa selective adherence to and entry into human endothelial cells.

The pathogenesis of Pseudomonas aeruginosa disseminated infections depends on bacterial interaction with blood vessels. We have hypothesized that in order to traverse the endothelial barrier, bacteria would have to adhere to and damage endothelial cells. To test this hypothesis, we studied the adherence to human endothelial cells in primary culture of the piliated P. aeruginosa strain PAK and of two isogenic nonpiliated strains: PAK/p-, which carries a mutation in the pilin structural gene, and PAK-N1, a mutant defective in the regulatory rpoN gene. PAK adhered significantly more than did the pilus-lacking strains. P. aeruginosa was also taken up by endothelial cells, as determined by quantitative bacteriologic assays and by transmission electron microscopy. This internalization of P. aeruginosa seems to be a selective process, since the piliated strain was taken up significantly more than the nonpiliated bacteria and the avirulent Escherichia coli DH5 alpha, even following bacterial centrifugation onto the cell monolayers. A significant fraction of the internalized P. aeruginosa PAK was recovered in a viable form after 6 h of residence within endothelial cells. Progressive endothelial cell damage resulted from PAK intracellular harboring, as indicated by the release of lactate dehydrogenase. An increasing concentration of PAK cells was recovered from the extracellular medium with time, suggesting that ingested bacteria were released from endothelial cells and multiplied freely. We speculate that in vivo the ability of some P. aeruginosa strains to resist intracellular residence would afford protection from host defenses and antibiotics and that the release of viable bacteria into bloodstream may represent a central feature of the pathogenesis of bacteremia in compromised patients.

Mutations in the fifth-position glutamate in Pseudomonas aeruginosa pilin affect the transmethylation of the N-terminal phenylalanine

The pili of Pseudomonas aeruginosa are composed of 15-kDa pilin monomers that are synthesized in the cytoplasm and assembled in the membrane. Processing occurs between the synthesis and assembly steps. The propilin is cleaved by a unique leader peptidase encoded by pilD, which is adjacent to the pilin structural gene pilA. This generates an N-terminal phenylalanine that is subsequently methylated by an as yet uncharacterized transmethylase. The pili of P. aeruginosa belong to the type IV class of pilins, which share a highly conserved N-terminal region 35 amino acids in length, containing a short leader of 6 or 7 amino acids. Two site-specific mutants in the N-terminal region of the mature pilin were constructed. Reestablishing the fifth-position glutamate in a four amino acid deletion mutant (amino acids 4-7) restored the leader peptidase cleavage but not the methylation. A mutation of the fifth-position glutamate to alanine decreased the degree of methylation of the N-terminal phenylalanine. Pili were not assembled by these mutants as assessed by electron microscopy and sensitivity to pilus-specific bacteriophage. Methylation may be required for recognition of the pilin by the assembly machinery and is not residue specific. The fifth-position glutamate appears to play an important role in transmethylase recognition of the pilin subunit.

Isolation, expression, and nucleotide sequencing of the pilin structural gene of the Brazilian purpuric fever clone of Haemophilus influenzae biogroup aegyptius

In this study we isolated the pilin gene from the Brazilian purpuric fever (BPF) clone of Haemophilus influenzae biogroup aegyptius, expressed the gene in Escherichia coli, and determined its nucleotide sequence. Comparison of the nucleotide sequence of the BPF pilin gene with the sequences of pilin genes from strains of H. influenzae sensu stricto demonstrated a high degree of identity. Consistent with this observation, hemagglutination inhibition studies performed with a series of glycoconjugates indicated that BPF pili and H. influenzae type b pili possess the same erythrocyte receptor specificity.

Localization of the virulence-associated genes pilA, pilR, rpoN, fliA, fliC, ent, and fbp on the physical map of Pseudomonas aeruginosa PAO1 by pulsed-field electrophoresis.

Seven virulence-associated genes have been placed on a genomic map of Pseudomonas aeruginosa PAO1, using pulsed-field electrophoresis, on the basis of the previous physical maps of Romling et al. (U. Romling, M. Duchene, D. Essar, D. Galloway, C. Guidi-Rontani, D. Hill, A. Lazdunski, R. Miller, K. Schleifer, D. Smith, H. Toschka, and B. Tummler, J. Bacteriol. 174:327-330, 1992; U. Romling, D. Grothues, W. Bautsch, and B. Tummler, EMBO J. 8:4081-4089, 1989) and Ratnaningsih et al. (E. Ratnaningsih, S. Dharmsthiti, V. Krishnapillai, A. Morgan, M. Sinclair, and B. W. Holloway, J. Gen. Microbiol. 136:2351-2357, 1990). The new locations for the outer membrane enterobactin iron-siderophore receptor ent gene (41 to 42 min) and the fliA gene (59 to 61 min), which encodes a minor sigma factor of RNA polymerase, are given. The pilA (the pilin structural gene), pilR (a pilin regulatory gene), and rpoN (encoding another minor sigma factor of RNA polymerase) genes map together at 71 to 75 min, locations correcting the previously reported values (V. Shortridge, M. Pato, A. Vasil, and M. Vasil, Infect. Immun. 59:3596-3603, 1990). The fbp gene (28 to 29 min), which encodes an outer membrane ferripyochelin-binding protein of low molecular weight, and the fliC gene (64 to 66 min), the flagellin structural gene, were determined to lie in the previously reported locations.

PulO, a component of the pullulanase secretion pathway of Klebsiella oxytoca, correctly and efficiently processes gonococcal type IV prepilin in Escherichia coli.

The PulO protein required for extracellular secretion of pullulanase by Klebsiella oxytoca is known to be highly homologous to two type IV prepilin peptidases, namely XcpA(PilD) (Pseudomonas aeruginosa) and TcpJ (Vibrio cholerae). The predicted prepilin peptidase activity of PulO was confirmed by showing that it could correctly process the product of the cloned pilE.1 type IV pilin structural gene from Neisseria gonorrhoeae in Escherichia coli. The P. aeruginosa prepilin peptidase and another putative prepilin peptidase, ComC from Bacillus subtilis, also processed prePilE. Subcellular fractionation showed that the pilE gene product that had been processed by PulO remained associated with the cytoplasmic membrane, as did the unprocessed precursor. PulO was also shown to process three of the four prePilE-PhoA hybrids tested. Southern hybridization experiments suggest that a pulO homologue is present in the N. gonorrhoeae chromosome.

Fimbriation of Pseudomonas cepacia.

Fimbriae (pili) on the surface of bacteria have been suggested to facilitate adherence to mucosal epithelial surfaces. Three Pseudomonas cepacia cystic fibrosis isolates were screened for their ability to agglutinate erythrocytes (HA), a characteristic of some fimbrial types. One strain, designated PC103, was HA+, while another, PC109, was HA-. A fimbriated (f+) HA+ derivative of PC109 (PC2(13)) was selected by repeated erythrocyte adsorption. The two HA+ strains were shown by transmission electron microscopy to possess fimbriae which averaged 4.8 +/- 1.36 nm in width and 200 to greater than 2,100 nm in length (PCE2(13)) and 3.4 to 11.4 nm in diameter and 280 to 720 nm in length (PC103). Sodium dodecyl sulfate-polyacrylamide gel electrophoresis of outer membrane proteins prepared from PC103, PC109, and PCE2(13) indicated that the putative fimbrial subunit had a mass of 16 kDa. Western blot (immunoblot) analysis of sheared cell supernatants indicated that the 16-kDa subunit from PC103 and PCE2(13) reacted with antibody to the P. aeruginosa PAK pilin subunit. Southern blot analysis of a SalI digest of PC103 DNA showed DNA fragments which hybridized to P. aeruginosa PAK probes containing either the pilin structural gene (pilA) or the pilin accessory genes (pilB, -C, and -D) but not the conserved N-terminal region of pilA. A 15-kb band was common to both hybridizations, indicating that this fragment contains the PC103 fimbrial gene cluster. These results indicated the presence of homology between P. aeruginosa PAK and PC103 fimbriae but also suggested that the P. cepacia fimbriae are not type IV-like. The importance of fimbriae in adherence to A549 cells (type II pneumocytes) was assessed with PC109 (f-) and PCE2(13) (f+). PCE2(13) had an approximately 20-fold-higher level of adherence to A549 cells than PC109. This suggested that fimbriation of P. cepacia is associated with increased adherence in vitro.

CHAPERONE-ASSISTED ASSEMBLY AND MOLECULAR ARCHITECTURE OF ADHESIVE PILI

The assembly of bacterial pili as exemplified here by P and type 1 pili of E. coli is a complex process involving specific molecular interactions between structural and chaperone proteins. The assembly process occurs postsecretionally, i.e. after the subunits are translocated across the cytoplasmic membrane. In a single cell, hundreds of thousands of interactive subunits are typically surface localized and assembled into pili. Periplasmic chaperones are generally required to bind to the interactive subunits and partition them into assembly-competent complexes. The binding of the chaperone to the subunits apparently protects the interactive surfaces and prevents them from aggregating at the wrong time and place within the cell. Pili are most likely assembled into linear polymers that package into right-handed helices after their translocation through specific outer-membrane channels. Each pilus filament is a quaternary assembly of the structural subunit and several minor subunits including the adhesin moiety. Although the assembly and organization of P and type 1 pili are very similar, there are some notable differences. For example, the P pilus adhesin is located exclusively at the tips of the pilus filament and forms part of a morphologically distinct structure. In contrast, the adhesion moiety of type 1 pili is inserted into the pilus filament at intervals, but only the adhesin molecule exposed at the pilus tip is functional. The variability in isoreceptor recognition amongst P pili has been solely ascribed to structural differences in the respective adhesin molecules, whereas in type 1 pili, variability in binding specificity has been attributed to the pilus filament that influences the conformation of the adhesin moiety. Less is known about the structure or assembly of type 4 pili, which are a unique class of pili expressed by several different species of gram-negative bacteria. The phase variation of the pilC assembly gene in N. gonorrheae to the off state results in the accumulation of unassembled subunits toxic to the cells. This process exerts a strong selection pressure on the cells that triggers alterations in the pilin structural gene. Thus, antigenic variation of pili in this organism may be regulated at the level of assembly. Finally, the concept of periplasmic chaperones in postsecretional assembly is most likely a general phenomenon in the biology of gram-negative bacteria. The investigations of pilus assembly will continue to provide insight into the details of how macromolecular assembly reactions are coordinated in the bacterial cell and how the regulation of assembly genes can profoundly affect biological processes.

Adhesion of Pseudomonas aeruginosa pilin-deficient mutants to mucin.

Attachment of Pseudomonas aeruginosa to epithelial cells or tracheobronchial mucin is mediated by surface adhesins. Pili, composed of monomeric pilin subunits, make up one such class of adhesins. The formation of pili and flagella in P. aeruginosa is under the control of the alternative sigma factor rpoN. Isogenic mutant strains with insertionally inactivated rpoN genes were constructed with strains PAK, 1244, and CF613 and were tested for their ability to adhere to respiratory mucin. All rpoN mutants showed significant reduction of adherence to mucin relative to that of their wild-type parents. In contrast, the adherence of pilin structural gene mutants was similar to the adherence of wild types. These results provide suggestive evidence that P. aeruginosa also binds to mucin via adhesins that are distinct from pilin and are still under the genetic control of rpoN. Unlike the laboratory strain PAK, the clinical strains 1244 and CF613 are capable of agglutinating erythrocytes. The rpoN mutation had a minimal effect on the interaction of bacteria with erythrocytes, indicating that the transcription of a gene(s) specifying the agglutination phenomenon does not utilize rpoN. These findings collectively indicate the existence of several classes of adhesins on the surface of P. aeruginosa that may play an important role in colonization of the human respiratory tract.

Interaction of Pseudomonas aeruginosa with A549 pneumocyte cells.

The interaction of Pseudomonas aeruginosa with a human lung pneumocyte cell line (A549) was studied. Wild-type strain PAK adhered efficiently to the A549 cells, while an isogenic mutant, carrying a mutation in the pilin structural gene, adhered at 10 to 20% of the wild-type levels. Another nonpiliated mutant of P. aeruginosa PAK, defective in the pleiotropic regulatory gene rpoN, did not adhere to A549 cells, suggesting the presence of a second, RpoN-controlled adhesin on the bacterial surface. Endocytosis of wild-type P. aeruginosa PAK by A549 cells was also demonstrated. A significant fraction of the internalized bacteria were recovered in a viable form after several hours of residence within the A549 cells. When examined by electron microscopy, intracellular bacteria were located in membranous vesicles, and no evidence of killing by lysosomal mechanisms was observed. These studies raise the possibility that during chronic respiratory tract infections in immunocompromised patients, P. aeruginosa may persist in intracellular compartments and therefore be protected from the defense mechanisms of the host.

Products of three accessory genes, pilB, pilC, and pilD, are required for biogenesis of Pseudomonas aeruginosa pili

The polar pili of Pseudomonas aeruginosa are composed of monomers of the pilin structural subunits. The biogenesis of pili involves the synthesis of pilin precursor, cleavage of a six-amino-acid leader peptide, membrane translocation, and assembly of monomers into a filamentous structure extending from the bacterial surface. This report describes three novel genes necessary for the formation of pili. DNA sequences adjacent to pilA, the pilin structural gene, were cloned and mutagenized with transposon Tn5. Each of the insertions were introduced into the chromosome of P. aeruginosa PAK by gene replacement. The effect of the Tn5 insertions in the bacterial chromosome on pilus assembly was assessed by electron microscopy and sensitivity of mutants to a pilus-specific bacteriophage. The resultant mutants were also tested for synthesis and membrane localization of the pilin antigen in order to define the genes required for maturation, export, and assembly of pilin. A 4.0-kilobase-pair region of DNA adjacent to the pilin structural gene was found to be essential for formation of pili. This region was sequenced and found to contain three open reading frames coding for 62-, 38- to 45-, and 28- to 32-kilodalton proteins (pilB, pilC, and pilD, respectively). Three proteins of similar molecular weight were expressed in Escherichia coli from the 4.0-kilobase-pair fragment flanking pilA with use of a T7 promoter-polymerase expression system. The results of the analyses of the three genes and the implications for pilin assembly and maturation are discussed.

Cloning and sequencing of the Pseudomonas aeruginosa 1244 pilin structural gene

The pilin structural gene of Pseudomonas aeruginosa 1244 was cloned in both cosmids and lambda. Expression of the cloned gene was detected in P. aeruginosa strains PAO2003, PA103, and 653A by an immunoblot reaction utilizing monoclonal antibodies. Western blot analysis showed that pilin expressed from the cloned gene was slightly larger than native 1244 pilin when produced in strains PAO2003 and 653A, but distinctly smaller in PA103. Bacteriophages specific for the 1244 pilus did not lyse strain PAO2003 containing the cloned 1244 pilin gene, indicating that functional 1244 pili were not assembled in this recombinant strain. Nucleotide sequencing revealed a coding region which when translated would produce a 15,615 dalton peptide. The amino-terminal region of this peptide is identical with published pilin sequences. While the rest of the peptides are generally dissimilar, common residues are seen within potentially antigenic regions.

Characterization of Pseudomonas aeruginosa mutants with altered piliation

The pilus-specific Pseudomonas aeruginosa bacteriophage P04 was used to select spontaneous mutants of strain PAK which have altered piliation. The largest class of phage-resistant mutants synthesized the pilin polypeptide, but did not assemble pili. These mutants are likely to contain mutations in genes required for pilus assembly and not mutations in the pilin structural gene, as they could not be complemented by a normal copy of the pilin gene. In addition, two alterations in pilin gene transcription were found among the mutants--hyperpiliated mutants which overproduce pilin mRNA, and a mutant with temperature-sensitive pilin gene transcription. We also present a model for the regulation of pilin gene transcription by a feedback mechanism sensitive to the relative rates of pilus assembly and disassembly.

Effects of recA mutations on pilus antigenic variation and phase transitions in Neisseria gonorrhoeae.

Intragenic recombination between the single complete pilin gene (expression locus) and multiple, distinct, partial pilin gene copies (silent, storage loci) is thought to account for the generation of pilus antigenic diversity and piliation phase (on-off) changes exhibited by Neisseria gonorrhoeae. The mechanisms operating in the genomic rearrangements associated with these forms of pilus variation were investigated through the study of isogenic strains of gonococci bearing either wild-type or altered recA alleles. Examination of the rates of pilus phase variation and the genetic basis for changes in piliation status displayed by these strains show that recA mediated homologous recombination is required for these high frequency events and confirm that the nonpiliated state results from mutations in the expressed pilin gene. In a strain that is deficient in recA mediated homologous recombination, pilus phase variation occurs at a 100-1000-fold reduced rate and results predominantly from one class of spontaneous frameshift mutations within the pilin structural gene.

Gene conversion involving the pilin structural gene correlates with pilus + ⇄ pilus − changes in Neisseria gonorrhoeae

Gonococci (Gc) exhibit pilus + → pilus − “phase transitoins” at high frequency, but only some of the pilus − Gc can revert to pilus + phenotype. We examined reversible phase transitions between pilus + Gc and a particular pilus − variant (P −rp + phenotype) whose pilin mRNA carries a unique block of nucleotides encoding an “assembly missense” pilin polypeptide. The results show that Gc pilus + ⇄ P −rp + transitions can result from intragenic recombination in which there is nonreciprocal exchange of partially homologous DNA sequences from a partial pilin gene (in silent, storage form) into the expression locus' complete pilin gene. Hence Gc pilus phase variation, like pilus antigenic variation, can occur by gene conversion of the pilin structural gene expression locus.

Piliation control mechanisms in Neisseria gonorrhoeae.

Gonococci (Gc) undergo pilus+ to pilus- "phase transitions" readily in vitro. In the present study we sequenced pilin mRNA from reverting, pilus- Gc by oligonucleotide primer extension and compared these pilin mRNA sequences with those expressed by their pilus+ predecessors and pilus+ revertants. The results suggest that genetic rearrangement within the pilin structural gene can generate defective pilin gene products, resulting in a pilus- phenotype. These pilus- Gc give rise to pilus+ revertants upon reconstitution of their modified pilin gene.