Pilin Peptide Research Articles

Harnessing the power of microbial nanowires.

SummaryThe reduction of iron oxide minerals and uranium in model metal reducers in the genus Geobacter is mediated by conductive pili composed primarily of a structurally divergent pilin peptide that is otherwise recognized, processed and assembled in the inner membrane by a conserved Type IVa pilus apparatus. Electronic coupling among the peptides is promoted upon assembly, allowing the discharge of respiratory electrons at rates that greatly exceed the rates of cellular respiration. Harnessing the unique properties of these conductive appendages and their peptide building blocks in metal bioremediation will require understanding of how the pilins assemble to form a protein nanowire with specialized sites for metal immobilization. Also important are insights into how cells assemble the pili to make an electroactive matrix and grow on electrodes as biofilms that harvest electrical currents from the oxidation of waste organic substrates. Genetic engineering shows promise to modulate the properties of the peptide building blocks, protein nanowires and current‐harvesting biofilms for various applications. This minireview discusses what is known about the pilus material properties and reactions they catalyse and how this information can be harnessed in nanotechnology, bioremediation and bioenergy applications.

Molecular and Electronic Structure of the Peptide Subunit of Geobacter sulfurreducens Conductive Pili from First Principles

The respiration of metal oxides by the bacterium Geobacter sulfurreducens requires the assembly of a small peptide (the GS pilin) into conductive filaments termed pili. We gained insights into the contribution of the GS pilin to the pilus conductivity by developing a homology model and performing molecular dynamics simulations of the pilin peptide in vacuo and in solution. The results were consistent with a predominantly helical peptide containing the conserved α-helix region required for pilin assembly but carrying a short carboxy-terminal random-coiled segment rather than the large globular head of other bacterial pilins. The electronic structure of the pilin was also explored from first principles and revealed a biphasic charge distribution along the pilin and a low electronic HOMO-LUMO gap, even in a wet environment. The low electronic band gap was the result of strong electrostatic fields generated by the alignment of the peptide bond dipoles in the pilin's α-helix and by charges from ions in solution and amino acids in the protein. The electronic structure also revealed some level of orbital delocalization in regions of the pilin containing aromatic amino acids and in spatial regions of high resonance where the HOMO and LUMO states are, which could provide an optimal environment for the hopping of electrons under thermal fluctuations. Hence, the structural and electronic features of the pilin revealed in these studies support the notion of a pilin peptide environment optimized for electron conduction.

Research Article: Synthetic Peptide Vaccine Development: Designing Dual Epitopes into a Single Pilin Peptide Immunogen Generates Antibody Cross‐reactivity between Two Strains of Pseudomonas aeruginosa

One of the main challenges of Pseudomonas aeruginosa vaccine development is the design of an antigen that elicits cross-reactive antibodies against multiple virulent strains. Using a rational design approach, we have developed a single 17-residue peptide immunogen that generates antibodies that target the receptor-binding domain of the type IV pilus of more than one strain of P.aeruginosa. Using the receptor-binding domain sequence, of native strain PAO as a template, we have systematically changed up to five residues in the PAO sequence of the peptide immunogen into that of the PAK sequence. We show by indirect and competitive ELISA that the mutant peptide immunogens elicit the development of polyclonal sera that is cross-reactive to both native strain PAO and PAK pilin. We further show that there are at least two separate antibody populations in the polyclonal sera that possess closely related epitopes but which are each strain specific. Moreover, part of the epitope for the PAO-specific antibodies consists of several residues outside the disulfide loop of the receptor-binding domain. This allows us to create two unique epitopes within the same receptor-binding domain sequence.

Interaction of a peptide from the receptor-binding domain of Pseudomonas aeruginosa pili strain PAK with a cross-reactive antibody: changes in backbone dynamics induced by binding.

The C-terminal receptor-binding region of Pseudomonas aeruginosa pilin protein strain PAK (residues 128-144) has been the target for the design of a vaccine effective against P. aeruginosa infections. We have recently cloned and expressed a (15)N-labeled PAK pilin peptide spanning residues 128-144 of the PAK pilin protein. The peptide exists as a major (trans) and minor (cis) species in solution, arising from isomerization around a central Ile(138)-Pro(139) peptide bond. The trans isomer adopts two well-defined turns in solution, a type I beta-turn spanning Asp(134)-Glu-Gln-Phe(137) and a type II beta-turn spanning Pro(139)-Lys-Gly-Cys(142). The cis isomer adopts only one well-defined type II beta-turn spanning Pro(139)-Lys-Gly-Cys(142) but displays evidence of a less ordered turn spanning Asp(132)-Gln-Asp-Glu(135). These turns have been implicated in cross-reactive antibody recognition. (15)N NMR relaxation experiments of the (15)N-labeled recombinant PAK pilin peptide in complex with an Fab fragment of a cross-reactive monoclonal antibody, PAK-13, raised against the intact PAK pilus, were performed in order to probe for changes in the mobilities and dynamics of the peptide backbone as a result of antibody binding. The major results of these studies are as follows: binding of Fab leads to the preferential ordering of the first turn over the second turn in each isomer, binding of Fab partially stabilizes peptide backbone regions undergoing slow (microsecond to millisecond) exchange-related motions, and binding of Fab leads to a greater loss in backbone conformational entropy at pH 7.2 versus pH 4.5. The biological implications of these results will be discussed in relation to the role that fast and slow backbone motions play in PAK pilin peptide immunogenicity and within the framework of developing a pilin peptide vaccine capable of conferring broad immunity across P. aeruginosa strains.

Interaction of a bacterially expressed peptide from the receptor binding domain of Pseudomonas aeruginosa pili strain PAK with a cross-reactive antibody: conformation of the bound peptide.

The C-terminal receptor binding region of Pseudomonas aeruginosa pilin protein strain PAK (residues 128-144) has been the target for the design of a vaccine effective against P. aeruginosa infections. We have recently cloned and expressed a (15)N-labeled PAK pilin peptide spanning residues 128-144 of the PAK pilin protein. The peptide exists as a major (trans) and minor (cis) species in solution, arising from isomerization around a central Ile(138)-Pro(139) peptide bond. The trans isomer adopts two well-defined turns in solution, a type I beta-turn spanning Asp(134)-Glu-Gln-Phe(137) and a type II beta-turn spanning Pro(139)-Lys-Gly-Cys(142). The cis isomer adopts only one well-defined type II beta-turn spanning Pro(139)-Lys-Gly-Cys(142) but displays evidence of a less ordered turn spanning Asp(132)-Gln-Asp-Glu(135). These turns have been implicated in cross-reactive antibody recognition. (15)N-edited NMR spectroscopy was used to study the binding of the (15)N-labeled PAK pilin peptide to an Fab fragment of a cross-reactive monoclonal antibody, PAK-13, raised against the intact PAK pilus. The results of these studies are as follows: the trans and cis isomers bind with similar affinity to the Fab, despite their different topologies; both isomers maintain the conformational integrity of their beta-turns when bound; binding leads to the preferential stabilization of the first turn over the second turn in each isomer; and binding leads to the perturbation of resonances within regions of the trans and cis backbone that undergo microsecond to millisecond motions. These slow motions may play a role in induced fit binding of the first turn to Fab PAK-13, which would allow the same antibody combining site to accommodate either trans or cis topology. More importantly for vaccine design, these motions may also play a role in the development of a broad-spectrum vaccine capable of generating an antibody therapeutic effective against the multiple strains of P. aeruginosa.

Backbone dynamics of a bacterially expressed peptide from the receptor binding domain of Pseudomonas aeruginosa pilin strain PAK from heteronuclear 1H-15N NMR spectroscopy.

The backbone dynamics of a 15N-labeled recombinant PAK pilin peptide spanning residues 128-144 in the C-terminal receptor binding domain of Pseudomonas aeruginosa pilin protein strain PAK (Lys128-Cys-Thr-Ser-Asp-Gln-Asp-Glu-Gln-Phe-Ile-Pro-Lys-Gly-Cys-Se r-Lys144) were probed by measurements of 15N NMR relaxation. This PAK(128-144) sequence is a target for the design of a synthetic peptide vaccine effective against multiple strains of P. aeruginosa infection. The 15N longitudinal (T1) and transverse (T2) relaxation rates and the steady-state heteronuclear [1H]-15N NOE were measured at three fields (7.04, 11.74 and 14.1 Tesla), five temperatures (5, 10, 15, 20, and 25 degrees C) and at pH 4.5 and 7.2. Relaxation data was analyzed using both the 'model-free' formalism [Lipari, G. and Szabo, A. (1982) J. Am. Chem. Soc., 104, 4546-4559 and 4559-4570] and the reduced spectral density mapping approach [Farrow, N.A., Szabo, A., Torchia, D.A. and Kay, L.E. (1995) J. Biomol. NMR, 6, 153-162]. The relaxation data, spectral densities and order parameters suggest that the type I and type II beta-turns spanning residues Asp134-Glu-Gln-Phe137 and Pro139-Lys-Gly-Cys142, respectively, are the most ordered and structured regions of the peptide. The biological implications of these results will be discussed in relation to the role that backbone motions play in PAK pilin peptide immunogenicity, and within the framework of developing a pilin peptide vaccine capable of conferring broad immunity across P. aeruginosa strains.

Cell-surface display of a Pseudomonas aeruginosa strain K pilin peptide within the paracrystalline S-layer of Caulobacter crescentus.

The paracrystalline surface (S)-layer of Caulobacter crescentus is composed of a single secreted protein (RsaA) that interlocks in a hexagonal pattern to completely envelop the bacterium. Using a genetic approach, we inserted a 12 amino acid peptide from Pseudomonas aeruginosa strain K pilin at numerous semirandom positions in RsaA. We then used an immunological screen to identify those sites that presented the inserted pilin peptide on the C. crescentus cell surface as a part of the S-layer. Eleven such sites (widely separated in the primary sequence) were identified, demonstrating for the first time that S-layers can be readily exploited as carrier proteins to display 'epitope-size' heterologous peptides on bacterial cell surfaces. Whereas intact RsaA molecules carrying a pilin peptide could always be found on the surface of C. crescentus regardless of the particular insertion site, introduction of the pilin peptide at 9 of the 11 sites resulted in some proteolytic cleavage of RsaA. Two types of proteolytic phenomena were observed. The first was characterized by a single cleavage within the pilin peptide insert with both fragments of the S-layer protein remaining anchored to the outer membrane. The other proteolytic phenomenon was characterized by cleavage of the S-layer protein at a point distant from the site of the pilin peptide insertion. This cleavage always occurred at the same location in RsaA regardless of the particular insertion site, yielding a surface-anchored 26 kDa proteolytic fragment bearing the RsaA N-terminus; the C-terminal cleavage product carrying the pilin peptide was released into the growth medium. When the results of this work were combined with the results of a previous study, the RsaA primary sequence could be divided into three regions with respect to the location of a peptide insertion and its effect on S-layer biogenesis: (i) insertions in the extreme N-terminus of RsaA either produce no apparent effect on S-layer biogenesis or disrupt surface-anchoring of the protein; (ii) insertions in the extreme C-terminus either produce no apparent effect on S-layer biogenesis or disrupt protein secretion; and (iii) insertions more centrally located in the protein either have no apparent effect on S-layer biogenesis or result in proteolytic cleavage of RsaA. These data are discussed in relation to our previous assignment of the RsaA N- and C-terminus as regions that are important for surface anchoring and secretion respectively.

Solution secondary structure of a bacterially expressed peptide from the receptor binding domain of Pseudomonas aeruginosa pili strain PAK: A heteronuclear multidimensional NMR study.

The C-terminal receptor binding region of Pseudomonas aeruginosa pilin protein strain PAK (residues 128-144) has recently been the target for the design of a synthetic peptide vaccine effective against multiple strains of P. aeruginosa infection. We have successfully cloned and bacterially expressed a 15N-labeled PAK pilin peptide spanning residues 128-144 of the intact PAK pilin protein, PAK 128-144(Hs145), and have determined the solution secondary structure of this peptide using heteronuclear multidimensional NMR spectroscopy. The oxidized recombinant peptide exists as a major (trans) and minor (cis) species in solution, arising from isomerization around the Ile138-Pro139 peptide bond. The pattern of NOEs, temperature coefficients, and coupling constants observed for the trans isomer demonstrate the presence of a type I beta-turn and a type II beta-turn spanning Asp134-Glu-Gln-Phe137 and Pro139-Lys-Gly-Cys142, respectively. This is in agreement with the NMR solution structure of the trans isomer of a synthetic PAK 128-144 peptide which showed a type I and a type II beta-turn in these same regions of the sequence [McInnes, C., Sönnichsen, F. D., Kay, C. M., Hodges, R. S., and Sykes, B. D. (1993) Biochemistry 32, 13432-13440; Campbell, A. P., McInnes, C., Hodges, R. S., and Sykes, B. D. (1995) Biochemistry 34, 16255-16268]. The pattern of NOEs, temperature coefficients, and coupling constants observed for the cis isomer also demonstrate a type II beta-turn spanning Pro139-Lys-Gly-Cys142, but suggest a second beta-turn spanning Asp132-Gln-Asp-Glu135. Thus, the cis isomer may also possess a double-turn motif (like the trans isomer), but with different spacing between the turns and a different placement of the first turn in the sequence. The discovery of a double-turn motif in the trans (and cis) recombinant PAK pilin peptide is an extremely important result since the double turn has been implicated as a structural requirement for the recognition of both receptor and antibody. These results pave the way for future isotope-edited NMR studies of the labeled recombinant PAK pilin peptide bound to antibody and receptor, studies integral to the design of an effective synthetic peptide vaccine.

The type-4 pilus is the major virulence-associated adhesin of Pseudomonas aeruginosa--a review.

Pseudomonas aeruginosa (Pa) produces several surface-associated adherence factors or adhesins which promote attachment to epithelial cells and contribute to the virulence of this pathogen. Among them, the type-4 pilus accounts for about 90% of the adherence capability of Pa to human lung pneumocyte A549 cells. Furthermore, it is responsible for more than 90% of the virulence in AB.Y/SnJ mice. Pa type-4 pili display a tip-base differentiation with the adherence function located at the tip of the pilus. All Pa pili prototypes characterized so far contain an intrachain disulfide loop (DSL) of 12 to 17 semi-conserved amino acid residues at the C-terminus of pilin. In Pa, this DSL comprises the epithelial cell-binding domain. Despite little sequence homology, DSL-containing peptides of different pilin prototypes seemingly reveal striking structural similarities. Two beta-turns within the loop and the disulfide bridge impose significant structural rigidity on the DSL pilin peptide, suggesting a conformationally conserved binding domain. Insertions of C-terminal pilin peptides with disrupted DSL displayed on the surface of bacterial S-layer mediate the same receptor binding characteristics as pili, indicating that a DSL is not essential in maintaining the functionality of the binding domain. Pa pili bind specifically to the carbohydrate moiety of the glycosphingolipids (GSL) asialo-G(M1) and asialo-G(M2) and, to a much weaker extent, to lactosyl ceramide and ceramide trihexoside. The disaccharide sequence GalNAc beta(1-4)Gal, common in both asialo-G(M1) and asialo-G(M2), likely represents the minimal structural receptor motif recognized by the pili. Pa pili also bind to surface-localized proteins of human epithelial cells and other cell types, suggesting that non-sialylated GSL and (glyco)proteins function as receptors of pili. In addition to the major pilus adhesin, exoenzyme S and, as recent studies indicate, flagella, are further protein adhesins of Pa with GSL receptor binding specificities similar to those of pili.