Piezosurgery Research Articles

Scalp-Split Technique: A Concept of Bone Splitting and Expansion for Thin Alveolar Ridges to Place Dental Implants.

Bone expansion is when the existing bone at the implant site is split and separated to create a gap to widen it. This article introduces a novel concept of bone expansion for the ultrathin alveolar ridges to place dental implants with zero wastage of existing natural bone in long-term edentulous arches. Instead of using twist drills and piezo surgery kits, the bone is split with a surgical scalpel blade to prevent natural bone wastage. The split helps to expand the bone horizontally by using expanders to accommodate the smaller diameter implants. This technique was applied to 12 individuals to rehabilitate their atrophic edentulous mandibles to facilitate the implant-supported overdentures, and it revealed that all the cases achieved successful osseointegration after placing implants following this method. The scalp-spilt technique is promising for providing implant-retained or implant-supported prostheses over ultrathin edentulous alveolar ridges.

Clinical and radiographic changes following transcrestal sinus augmentation: A scoping review of the last 25 years.

Maxillary sinus floor elevation is a surgical procedure intended to increase the volume of the bone vertically to accommodate dental implant placement. This intervention is frequently required for implant installation in the posterior maxilla, where the bone may be insufficient for securing implants of necessary length and stability. Sinus floor elevation can be completed either through a direct approach with a "window" through the lateral wall of the alveolar ridge or an indirect "transcrestal/transalveolar" sinus floor elevation (TSFE), which accesses the sinus floor through the crest of the edentulous ridge. Our study aims to provide a comprehensive scoping review of research conducted over the past 25 years on TSFE, specifically. A literature search aimed at identifying pertinent literature for the purpose of this PRISMA-ScR-compliant scoping review was conducted. Only randomized controlled trials, non-randomized controlled trials, prospective cohort studies, and case series that met the eligibility criteria were selected. Relevant data from these studies were extracted. Primary outcome measures included radiographic bone levels and implant failure >5 years. Secondary outcome measures included implant stability at time of placement and complications. Interventions reported in the selected studies were grouped based on treatment modality, which were then compared with the control therapy (traditional osteotome technique) after a minimum of 12 months healing period. Our search yielded 633 records, and after deduplication, 574 of these were screened. Application of the eligibility criteria led to the inclusion of 37 articles in the final selection. Case selection for included studies enrolling subjects: Four different transcrestal sinus elevation treatment modalities were identified: (a) osteotome, (b) piezoelectric surgery, (c) osseodensification, and (d) hydraulic techniques. Due to the heterogeneity of the studies, no superior approach for TSFE could be identified. Overall, all techniques demonstrated high implant survival rates. Comprehensive understanding of the patient's medical history, available armamentarium, and post-operative complications/management strategies are all essential to the completion of a successful TSFE approach for implant placement in the posterior maxilla, regardless of the treatment modality used.

Less-Invasive Technique for Non-stabilized Mandibular Fracture in Mouse Models.

Non-stabilized fractures can be made at mandibular sites in mice, thus making it possible to analyze bone repair using an endochondral ossification mode. To most accurately reflect this process in vivo, it is necessary to have a standardized protocol to avoid excessive bone loss and soft tissue damage, particularly at the mandibular site, an anatomical site characterized by minimal access. To our knowledge, we describe for the first time a less-invasive protocol of non-stabilized mandibular fracture in mice. Adult mice are anesthetized with isoflurane and receive a preoperative dose of buprenorphine by subcutaneous injection. A submandibular approach is performed, with a skin incision made along the inferior border of the mandible. The masseter muscle is elevated in a subperiosteal plane along the mandibular ramus with a periosteal elevator. A vertical and complete fracture of the ramus is performed from the basilar border to the coronoid notch (between condylar and coronoid processes), using a piezoelectric bone surgery device under saline serum irrigation at the basilar edge and scissors to complete the fracture of the mandibular ramus. The skin approach is closed by silk sutures. This detailed procedure for non-stabilized mandibular fractures offers an efficient procedure allowing minimal bone loss and soft tissue damage. This technique ensures successful and consistent results to accurately reflect the process of endochondral bone repair in mouse models.

Novel Technique for Alveolar Ridge Expansion: A Comparative Clinical Study

Background: Piezosurgery improved the split approach by making it safer, easier, and less prone to complications when treating extremely atrophic crests. Densah drills, with their unique design, expand the ridge by densifying bone in a reverse, non-cutting mode. Objective: To assess the effectiveness of sagittal piezosurgery, which involves cutting bone to the full implant depth and then expanding it using osseodensification drills. We use this technique to expand narrow alveolar bones and simultaneously place dental implants in the maxillary and mandibular arches. Methods: Fourteen patients received 31 dental implants. The maxillary arch received 19, and the mandible received 12 dental implants. This study will include patients who have narrow alveolar bone ridges (2.5–4 mm). After marking the implant sites with a pilot drill, we used a piezoelectric surgery tip to cut the alveolar crest to the depth of the planned dental implant. We then sequentially used Versah Drills, accompanied by extensive irrigation using cooled, sterile normal saline, and finally inserted the implant into the subcrestal level. Results: This study revealed a significant difference in alveolar ridge width immediately after the procedure, and the significant change in the mandible was slightly higher than that in the maxillary arch. However, all implants in both jaws achieved successful osseointegration. Conclusions: The alveolar ridge width changed a lot more in the mandible than in the maxillary arch after the procedure. These two strategies work well together to properly and simply expand severely atrophied alveolar ridges without affecting bone healing or the osseointegration process.

Surgical Navigation and CAD-CAM-Designed PEEK Prosthesis for the Surgical Treatment of Facial Intraosseous Vascular Anomalies.

Background: Intraosseous vascular anomalies in the facial skeleton present significant diagnostic and therapeutic challenges due to complex anatomy. These anomalies represent about 0.5-1% of bony neoplastic and tumor-like lesions, usually presenting as a firm, painless mass. Most described intraosseous vascular malformations are venous malformations (VMs) and, more rarely, arteriovenous malformations. Objectives: The objectives of this work are to show our experience, protocol and the applications of computer planning, virtual surgery, CAD-CAM design, surgical navigation, and computer-assisted navigated piezoelectric surgery in the treatment of facial intraosseous vascular anomalies and to evaluate the advantages and disadvantages. Methods: Three females and one male with periorbital intraosseous vascular anomalies were treated using en-block resection and immediate reconstruction with a custom-made PEEK prosthesis. One lesion was in the supraorbital rim and orbital roof, one in the frontal bone and orbital roof, and two in the zygomatic region. We accomplished the resection and reconstruction of the lesion using virtual planning, CAD-CAM design, surgical navigation and piezoelectric device navigation. Results: There were no complications related to the surgery assisted with navigation. With an accuracy of less than 1 mm, the procedure may be carried out in accordance with the surgical plan. The surgeon's degree of uncertainty during deep osteotomies and in locations with low visibility was decreased by the use of the navigated piezoelectric device. Conclusions: Resection and reconstruction of facial intraosseous vascular anomalies benefit from this new surgical strategy using CAD-CAM technologies, computer-assisted navigated piezoelectric surgery, and surgical navigation.

Bone lid technique versus standard technique for treatment of mandibular lesions

BackgroundJaw lesions are frequent in the oral and maxillofacial areas. Different methods for enucleating jaw lesions in the oral and maxillofacial sites have been proposed, including the bone lid technique.PurposeThe aim of this study was to compare the clinical and radiographic results of the bone lid technique employing a piezoelectric surgery to the traditional technique in individuals with mandibular lesions.Materials and methodsA randomized controlled trial was conducted on 24 patients with mandibular lesions. They were randomly allocated into two groups (n = 12 for each group). Group I: the mandibular lesion was excised with bone lid technique using a piezoelectric device, followed by the fixation of the bony window after its repositioning. Group II: the lesion was excised with the traditional method using rotatory burs. Pain, soft tissue healing, bone exposure, bone lid integration, and the volume of the residual bone defect were all assessed clinically and radiographically after one week, one month, and six months.ResultsAll patients in both groups showed adequate soft tissue healing except for one case in group I experienced wound dehiscence and bone lid exposure. The bone lid group reported significantly less pain than the usual approach at the 3rd and 7th days. After six months, the volume of bone defect filling was considerably higher in the bone lid group compared to the conventional group.ConclusionThe bone lid technique was an effective procedure in the management of mandibular lesions compared to the standard method. Besides, this technique provides better bone healing and reduces bone loss.Trial registrationThis clinical trial was registered at clinicaltrials.gov on 14/8/2023 and had registration number NCT05987930.

Mini Review Article] Practicality of Piezo Surgery in Periodontics

The ongoing advances in periodontics, have led to the introduction of Piezosurgery, which has been rejuvenating in the field of osseous surgeries. Piezosurgery® device is based on the piezoelectric effect by ultrasonic vibrations. The linear vibrations and cavitation effect gives blood free zone for clear visibility and operating accuracy. The display unit guides the user to choose from a variety of operational settings that optimize the ultrasonic frequency for desired procedures. It has various applications in periodontics particularly in osteotomy procedures and implant dentistry.

Use of piezoelectric instrumentation in craniofacial surgery.

The use of piezoelectric instrumentation is increasingly recognized as an alternative to traditional bone-cutting techniques across a wide array of surgeries. Here, we provide an overview of the technique, including device principles, benefits, and drawbacks. We also review its use in craniofacial surgery. Piezoelectric surgery is a minimally invasive bone-cutting system with lower risk of damage to surrounding soft tissue structures. Indications for its use are rapidly expanding across multiple fields, including craniofacial surgery. To date, piezosurgical techniques have been most widely adopted and studied in the contexts of rhinoplasty, orthognathic surgery, and cranioplasty in craniosynostosis. Piezosurgery can facilitate more precise and consistent osteotomies while decreasing morbidities associated with traditional osteotomy techniques. Primary limitations include cost and concerns regarding increased operative times secondary to operator learning curves and decreased cutting efficiency. Piezoelectric surgery represents an alternative to traditional bone-cutting modalities to improve precision, consistency, and safety of osteotomies. Further research is needed to better understand the efficacy of the technique as well as potential for additional applications.

Comparative Analysis of Surgical Techniques for Wisdom Tooth Extraction.

Wisdom tooth extraction often requires various surgical techniques due to differences in tooth position, root morphology, and patient characteristics. This research aims to compare traditional surgical extraction with minimally invasive techniques such as piezo surgery and laser-assisted extraction, as well as extraction with the aid of 3D imaging and navigation systems. Patients requiring wisdom tooth extraction were randomly assigned to one of the surgical technique groups. Preoperative imaging assessed tooth position and root morphology. Intraoperative variables and postoperative outcomes were recorded, including pain levels, swelling, and healing time. Patient-reported outcomes were assessed using standardized questionnaires. Piezo surgery, 3D imaging, and navigation-guided extraction techniques demonstrated a shorter mean duration of surgery and lower incidence of intraoperative complications compared to traditional extraction and laser-assisted extraction. Postoperative outcomes were superior in the 3D imaging and navigation-guided extraction group, with lower pain scores, reduced swelling, and faster healing time. Advanced imaging-guided techniques, particularly 3D imaging and navigation-guided extraction, offer significant benefits for patients undergoing wisdom tooth extraction by improving surgical precision, minimizing complications, and enhancing postoperative outcomes. Incorporating these technologies into routine practice can optimize patient care and outcomes in oral surgery.

Piezoelectric surgery - Gaining popularity in modern periodontics: A review

In this modern era of dentistry, piezoelectric surgery is one of the novel innovations invented by T. Vercelloti to perform various osseous surgeries. The piezoelectric device increases treatment effectiveness and ease of using the instrument during the surgery. Minor bleeding, accuracy in cutting, and magnificent tissue healing make it best to enhance surgical results despite being used in the most complex anatomical cases. The piezoelectric device produces ultrasonic vibration (25-29KHz frequency), an oscillation (60-120µm), and power up to 50W. Piezoelectric surgery devices allow for adequate bone-cutting without damaging the soft tissue. The present review emphasizes its discovery, ideology, components, and wide application in dentistry.

Mini Review Article] Practicality of Piezo Surgery in Periodontics

The ongoing advances in periodontics, have led to the introduction of Piezosurgery, which has been rejuvenating in the field of osseous surgeries. Piezosurgery® device is based on the piezoelectric effect by ultrasonic vibrations. The linear vibrations and cavitation effect gives blood free zone for clear visibility and operating accuracy. The display unit guides the user to choose from a variety of operational settings that optimize the ultrasonic frequency for desired procedures. It has various applications in periodontics particularly in osteotomy procedures and implant dentistry.

Comparison of different bone substitutes in the repair of rat calvaria critical size defects: questioning the need for alveolar ridge presentation.

This study aimed to evaluate the effectiveness of biomaterials in bone healing of critical bone defects created by piezoelectric surgery in rat calvaria. Histomorphologic analysis was performed to assess bone regeneration and tissue response. Fifty animals were randomized into five groups with one of the following treatments: Control group (n = 10), spontaneous blood clot formation with no bone fill; BO group (Bio-Oss, Geistlich Pharma; n = 10), defects were filled with bovine medullary bone substitute; BF group (Bonefill, Bionnovation; n = 10), defects were filled with bovine cortical bone substitute; hydroxyapatite group (n = 10), defects were filled with hydroxyapatite; calcium sulfate group (n = 10), defects were filled with calcium sulfate. Five animals from each group were euthanized at 30 and 45 days. The histomorphometry calculated the percentage of the new bone formation in the bone defect. All data obtained were evaluated statistically considering P < .05 as statistically significant. The results demonstrated the potential of all biomaterials for enhancing bone regeneration. The findings showed no statistical differences between all the biomaterials at 30 and 45 days including the control group without bone grafting. In conclusion, the tested biomaterials presented an estimated capacity of osteoconduction, statistically nonsignificant between them. In addition, the selection of biomaterial should consider the specific clinical aspect, resorption rates, size of the particle, and desired bone healing responses. It is important to emphasize that in some cases, using no bone filler might provide comparable results with reduced cost and possible complications questioning the very frequent use of ridge presentation procedures.

Primary Stability of Implants Inserted into Polyurethane Blocks: Micro-CT and Analysis In Vitro.

A total of 150 implant sites were prepared in rigid polyurethane blocks to simulate two distinct bone densities of 15 pounds per cubic foot (PCF) and 30 PCF, with a 1-mm-thick simulated cortex. The implant sites were equally distributed among piezoelectric surgery (PES), traditional drills (TD), and black ruby magnetic mallet inserts (MM). Two methods have been employed to evaluate the implant's primary stability, Osstell and micro-tomography. In the present study, we observed significant variations in the implant stability quotient (ISQ) values. More precisely, our findings indicate that the ISQ values were generally higher for 30 PCF compared to 15 PCF. In terms of the preparation technique, PES exhibited the greatest ISQ values, followed by MM, and finally TD. These findings corresponded for both bone densities of 30 PCF (PES 75.6 ± 1.73, MM 69.8 ± 1.91, and TD 65.8 ± 1.91) and 15 PCF (PES 72.3 ± 1.63, MM 62.4 ± 1.77, and TD 60.6 ± 1.81). By utilizing Micro-CT scans, we were able to determine the ratio of the implant occupation to the preparation site. Furthermore, we could calculate the maximum distance between the implant and the wall of the preparation site. The findings demonstrated that PES had a higher ratio of implant to preparation site occupation, followed by TD, and then the MM, at a bone density of 30 PCF (PES 96 ± 1.95, TD 94 ± 1.88, and MM 90.3 ± 2.11). Nevertheless, there were no statistically significant differences in the occupation ratio among these three approaches in the bone density of 15 PCF (PES 89.6 ± 1.22, TD 90 ± 1.31, and MM 88.4 ± 1.17). Regarding the maximum gap between the implant and the site preparation, the smallest gaps were seen when TD were used, followed by MM, and finally by PES, either in a bone density 15 PCF (PES 318 ± 21, TD 238 ± 17, and MM 301 ± 20 μm) or in a bone density 30 PCF (PES 299 ± 20, TD 221 ± 16, and MM 281 ± 19 μm). A statistical analysis using ANOVA revealed these differences to be significant, with p-values of < 0.05. The outcomes of this study indicate that employing the PES technique and osteo-densification with MM during implant insertion may enhance the primary stability and increase the possibility of early implant loading.

Minimally Invasive Approaches in Orthognathic Surgery: A Narrative Review of Contemporary Techniques and their Clinical Outcomes.

Maxillofacial surgery has evolved significantly, particularly in orthognathic procedures, shifting from invasive methods to minimally invasive techniques (MITs). Innovations, like 3D imaging, computer-aided simulations, piezoelectric surgery, and endoscopic assistance, have revolutionized patient care. These methods notably reduce bleeding, scarring, hospital stays, and recovery time, while enhancing surgical precision and outcomes. Our review focuses on modern MITs, including endoscopically assisted maxillomandibular advancement (EAMMA) and CAD/CAM technology. We conducted a thorough literature search, identifying 21 relevant articles from an initial pool of 423. The review evaluates the efficacy, complication rates, and long-term stability of these techniques, addressing challenges and future prospects. Emphasizing the significance of MI methods in orthognathic surgery, it advocates for further research and clinical adoption.

Ozone infiltration as an adjunctive treatment to piezoelectric surgery in the management of medication-related osteonecrosis of the jaws: case series of 29 patients.

Medication-related osteonecrosis of the jaws has been reported to be associated with bisphosphonate and RANKL inhibitor medications. This prospective clinical study aimed to assess the outcomes of pre-operative ozone infiltration therapy in patients with established MRONJ. The treatment protocol for ozone applications were designed as 20 applications ozone infiltration therapy followed by surgical interventions of necrotic tissue debridement using piezoelectric surgery instruments. The evaluation of the results based on the clinical and radiologic specifications considering the necrotic lesion reduction and healing. The study included 31 lesions in 29 patients. The mean follow-up was 23.6 months. 25 lesions out of 31 healed totally without any remissions. The outcomes were not affected by any variables such as gender, age, type of pharmacological treatment, lesion location, and MRONJ staging. The statistically significant results were found among the clinical condition of the patients (p = 0.01) and administration route of medications (p = 0.004). Healing was significantly less in patients that received intra-vascular administrations. Clinical conditions of the patients were divided as osteoporosis, oncologic, and arthritis. Significantly better results were obtained in osteoporosis patients. 38% of the population experienced spontaneous sequestration with signs of improvements and the surgical interventions were canceled. According to the results, total healing of MRONJ lesions was seen in 79% patients (81% lesions). Ozone therapy and debridement with Piezoelectric surgery can be considered as a safe and beneficial adjunctive treatment alternative for osteonecrosis lesions in cases of established MRONJ.

Use of new piezoelectric inserts in the avulsion of complex impacted teeth

This case series aims to present a new method for the avulsion of impacted third molars with a high risk of nerve damage.This new technique uses piezoelectric surgery, particularly the new dedicated insert, in order to significantly reduce the risk of iatrogenic injury induced by levers and rotating instruments. The study examines 17 dental elements with different degrees of impaction, classified according to Winter's Classification and Pell &amp; Gregory's Classification. Therefore, the prediction of the intervention difficulty was evaluated using the Modified JD Classification (MJD). When performing surgical extractions of teeth located near the inferior alveolar nerve (IAN), there is a considerable risk of neurological complications, in all the cases presented, the patients had a normal postoperative course, without any septic or functional/neurological complications. In cases where continuity with noble structures represents a strong risk factor for neurological sequelae, this technology can greatly reduce the risk of iatrogenic injuries.

Comparative Clinical Study of Using Piezoelectric Ultrasound Surgery Versus Conventional Technique in Sinus Lifting Procedure with Simultaneous Implant Insertion

Comparative Clinical Study of Using Piezoelectric Ultrasound Surgery Versus Conventional Technique in Sinus Lifting Procedure with Simultaneous Implant Insertion

COMPARATIVE ANALYSIS OF THE EFFICIENCY OF DIFFERENT METHODS OF OSTEOTOMY WHEN PERFORMING CLOSED RHINOPLASTY

The aim. Increasing the effectiveness of treatment of patients with primary deformity of the nasal skeleton with a pronounced violation of the function of nasal breathing, by improving existing and developing new methods of reconstructive surgery of the nose.&#x0D; Materials and methods. 38 patients participated in the study. They were divided into two groups of 19 patients each. The gender and age distribution in both groups was approximately the same. The control group had rhinoplasty performed using a traditional osteotomy. Endonasal continuous osteotomy was performed using a 4 mm chisel. The research group underwent a combination of piezoelectric surgery and combined transcutaneous access, during rhinoplasty. At the same time, a 3 mm chisel was used for lateral and transverse lateral osteotomies, and a piezotome was used to remove the hump, medial and transverse dorsal osteotomies. All patients of both groups underwent only primary rhinoplasty in a closed manner.&#x0D; Results. Postoperative symptoms and complications were studied in both groups: perforation of the mucous membrane, narrowing of the nasal airways, bony irregularities, eyelid swelling, periorbital ecchymoses, as well as overall patient satisfaction. Symptoms were evaluated on the first day after surgery, 3 days after surgery, and 1 week after treatment. When comparing the obtained data, a statistically significant decrease in intra- and post-operative complications was found when performing rhinoplasty using piezoelectric surgery in combination with transcutaneous access. Also, piezotome osteotomy in combination with transcutaneous access has a number of advantages over classic osteotomy, which consist in reducing traumatic complications, obtaining more stable bone structures during surgery, which gives a better predicted result of rhinoplasty, and therefore, greater patient satisfaction.&#x0D; Conclusions. Performing a combination of piezotome osteotomy with a transcutaneous approach improves the postoperative period for patients and contributes to a better rhinoplasty result due to fewer complications.

Effects of Piezoelectric Surgery on Implant Stability and Marginal Bone Level: Systematic Review and Meta-analysis

Effects of Piezoelectric Surgery on Implant Stability and Marginal Bone Level: Systematic Review and Meta-analysis

A systematic review on removal of osseointegrated implants: un update

BackgroundToday dental implants represent an effective therapy in case of partial or total edentulism, with an excellent success rate. Despite the results obtained, there may be biological or mechanical complications during the therapy, which lead to the loss of the implant. This systematic review aims to evaluate the current state of the art in the literature on techniques used for the removal of dental implants. Various aspects will be analyzed, such as the success of the technique, any complications, and the advantages and disadvantages of their use.MethodsTwo reviewers conducted a literature analysis (PubMed, Embase, Web of Science) of the last 20 years (2003–2023). The main criterion analyzed was the success of the technique, while secondary outcomes such as complications and risks of the technique were also analyzed. 258 articles were identified in the various search databases. 42 eligible articles were subsequently identified after an article screening. Only 18 full texts were subsequently included in the review.ResultsA total of 18 articles were selected and 1142 implants and 595 patients were included. The main techniques used were the Counter-Torque Ratchet Technique (CTRT), Piezoelectric bone surgery (PBS), trephine drills, carbide burs, Erbium, Chromium, Yttrium, Scandium, Gallium, Garnett (Er:Cr:YSGG) laser and carbon dioxide (CO2) laser. Combined uses of techniques have been identified such as: PBS and trephine burs or carbide burs, trephine burs with the use of a 3d-printed guide, CTRT and trephine burs. The technique with the highest success rate, less morbidity for the patient, and less removal of bone appears to be the CTRT.ConclusionsThe use of conservative techniques, especially CTRT, in bone removal is useful to allow for immediate implant placement in the removal area. However, further studies with a high sample size are needed to be performed on all techniques, particularly new randomized controlled trials (RCTs) that allow for the analysis of the success of alternative techniques such as Laser and Piezosurgery, which appear to be very promising.