Plant Physiological Parameters Research Articles

Understanding the role of magnetic (Fe3O4) nanoparticle to mitigate cadmium stress in radish (Raphanus sativus L.)

Heavy metals stress particularly cadmium contamination is hotspot among researchers and considered highly destructive for both plants and human health. Iron is examined as most crucial element for plant development, but it is available in inadequate amount because they are present in insoluble Fe3+ form in soil. Fe3O4 have been recently found as growth promoting factor in plants. To understand, a sand pot experiment was conducted in completely randomized design (control, cadmium, 20 mg/L Fe3O4 nanoparticles,40 mg/L Fe3O4 nanoparticles, 20 mg/L Fe3O4 nanoparticles + cadmium, 40 mg/L Fe3O4 nanoparticles + cadmium) to study the mitigating role of Fe3O4 nanoparticles on cadmium stress in three Raphanus sativus cultivars namely i.e., MOL SANO, MOL HOL PARI, MOL DAQ WAL. The plant growth, physiological and biochemical parameters i.e.,shoot length, shoot fresh weight, shoot dry weight, root length, root fresh and dry weight, MDA content, soluble protein contents, APX, CAT, POD activities and ion concentrations, membrane permeability, chlorophyll a, chlorophyll b and anthocyanin content, respectively were studied. The results displayed that cadmium stress remarkably reduces all growth, physiological and biochemical parameters for allcultivars under investigation. However, Fe3O4 nanoparticles mitigated the adverse effect of cadmium by improving growth, biochemical and physiological attributes in all radish cultivars. While, 20 mg/L Fe3O4 nanoparticles have been proved to be more useful against cadmium stress. The outcome of present investigation displayed that Fe3O4 nanoparticles can be utilized for mitigating heavy metal stress.

Effect of iodine species on biofortification of iodine in cabbage plants cultivated in hydroponic cultures

Iodine is an essential trace element in the human diet because it is involved in the synthesis of thyroid hormones. Iodine deficiency affects over 2.2 billion people worldwide, making it a significant challenge to find plant-based sources of iodine that meet the recommended daily intake of this trace element. In this study, cabbage plants were cultivated in a hydroponic system containing iodine at concentrations ranging from 0.01 to 1.0 mg/L in the form of potassium iodide or potassium iodate. During the experiments, plant physiological parameters, biomass production, and concentration changes of iodine and selected microelements in different plant parts were investigated. In addition, the oxidation state of the accumulated iodine in root samples was determined. Results showed that iodine addition had no effect on photosynthetic efficiency and chlorophyll content. Iodide treatment did not considerably stimulate biomass production but iodate treatment increased it at concentrations less than 0.5 mg/L. Increasing iodine concentrations in the nutrient solutions increased iodine content in all plant parts; however, the iodide treatment was 2–7 times more efficient than the iodate treatment. It was concluded, that iodide addition was more favourable on the target element accumulation, however, it should be highlighted that application of this chemical form in nutrient solution decreased the concetrations of selected micoelement concentration comparing with the control plants. It was established that iodate was reduced to iodide during its uptake in cabbage roots, which means that independently from the oxidation number of iodine (+ 5, − 1) applied in the nutrient solutions, the reduced form of target element was transported to the aerial and edible tissues.

Microbial-Based Biofungicides Mitigate the Damage Caused by Fusarium oxysporum f. sp. cubense Race 1 and Improve the Physiological Performance in Banana.

Fusarium wilt of banana (FWB) is the most limiting disease in this crop. The phytosanitary emergency caused by FWB since 2019 in Colombia has required the development of ecofriendly control methods. The aim of this study was to test the effectiveness of microbial-based biofungicides against FWB caused by Fusarium oxysporum f. sp. cubense race 1 (Foc R1) and correlate such effect with plant physiological parameters. Five Trichoderma (T1 to T4 and T9) and four Bacillus (T5 to T8)-based biofungicides were evaluated in pot experiments. In vitro, dual confrontation tests were also carried out to test whether the in vitro effects on Foc growth were consistent with the in vivo effects. While Trichoderma-based T3, T4, and T9, and Bacillus-based T8, significantly reduced the growth of Foc R1 in vitro, Trichoderma-based T1, T3, T4, and T9 temporarily reduced the Foc population in the soil. However, the incidence progress of FWB was significantly reduced by Bacterial-based T7 (74% efficacy) and Trichoderma-based T2 (50% efficacy). The molecular analysis showed that T7 prevented the inner tissue colonization by Foc R1 in 80% of inoculated plants. The T2, T4, T7, and T9 treatments mitigated the negative effects caused by Foc R1 on plant physiology and growth. Our data allowed us to identify three promising treatments to control FWB, reducing the progress of the disease, delaying the colonization of inner tissue, and mitigating physiological damages. Further studies should be addressed to determine the modes of action of the biocontrol agents against Foc and validate the utilization in the field.

Drought-tolerant rhizobacteria with predicted functional traits enhanced wheat growth and P uptake under moderate drought and low P-availability

This study aims to investigate the effect of isolated drought-tolerant rhizobacteria, spanning various groups, such as nitrogen-fixing bacteria (NFB), phosphate solubilizing bacteria (PSB), and other plant growth promoting rhizobacteria (PGPR), on the growth of wheat (Triticum durum) plants, focusing on various morphological and physiological responses under moderate drought and low-P availability. Among 343 rhizobacterial morphotypes, 16 exhibited tolerance to NaCl and PEG-6000. These included 8 PSB, 4 NFB, and 4 osmotolerant-PGPR groups, distributed across 14 different genera. Biochemical characterization showcased diverse PGP capabilities, particularly in P solubilization. The dynamic responses of drought-tolerant PSB to salt and PEG-6000-induced drought stress involved variations in organic acid (OA) secretion, with specific acids, including palmitic, lactic, and stearic, playing crucial roles in enhancing available P fractions. Inoculation with rhizobacteria significantly increased both shoot (SDW) and root (RDW) dry weights of wheat plants, as well as rhizosphere available P. PSB11 (Arthrobacter oryzae) emerged as the most effective strain, plausibly due to its positive impact on root morphological traits (length, surface, and volume). Other isolates, PSB10 (Priestia flexa), PSB13 (Bacillus haynesii), and particularly PGPR2 (Arthrobacter pascens) significantly increased shoot P content (up to 68.91 %), with a 2-fold increase in chlorophyll content. The correlation analysis highlighted positive associations between SDW, shoot P content, chlorophyll content index (CCI), and leaf area. Additionally, a negative correlation emerged between microbial biomass P and root morphophysiological parameters. This pattern could be explained by reduced competition between plants and rhizobacteria for accessible P, as indicated by low microbial biomass P and strong plant growth. Our investigation reveals the potential of drought-tolerant rhizobacteria in enhancing wheat resilience to moderate drought and low-P conditions. This is demonstrated through exceptional performance in influencing root architecture, P utilization efficiency, and overall plant physiological parameters. Beyond these outcomes, the innovative isolation procedure employed, targeting rhizobacteria from diverse groups, opens new avenues for targeted isolation techniques. This unique approach contributes to the novelty of our study, offering promising prospects for targeted bioinoculants in mitigating the challenges of drought and P deficiency in wheat cultivation.

Unlocking the Potential of Pepper Plants under Salt Stress: Mycorrhizal Effects on Physiological Parameters Related to Plant Growth and Gas Exchange across Tolerant and Sensitive Genotypes.

Agriculture is confronted with the challenge of ensuring global food security, yet the rapid expansion of salinity stress undoubtedly restricts plant productivity in cultivable areas, posing a significant threat to crop yields. Arbuscular mycorrhizal fungi (AMFs) have emerged as a biological tool for enhancing plant salt stress tolerance. To utilize this biological tool, this study evaluated the response in growth and physiological parameters of tolerant (Karaisali) and sensitive (Demre) pepper genotypes. The experiment involved mycorrhizal-treated (Glomus clarium) and non-mycorrhizal (control) plants of both the tolerant and sensitive pepper genotypes. The plants were subjected to two salt doses: 75 and 150 mM. The plant growth and physiological parameters were measured at 40 days after transplanting. The mycorrhizal activity was found to be significantly more effective in the sensitive genotype. We found notable differences in mycorrhizal activity between the pepper genotypes under salt stress conditions, with the sensitive genotype "Demre" showing greater responsiveness to mycorrhizal association compared with the "Karaisali" variety. Under both moderate (75 mM NaCl) and higher salt stress levels (150 mM NaCl), both the "Karaisali" and "Demre" varieties exhibited substantial increases in their shoot dry weights. However, these increases were consistently higher in the "Demre" plants. Moreover, the AMFs demonstrated significant enhancements in photosynthesis rates under both moderate and high salinity levels in both genotypes. Overall, our findings suggest that AMFs play a crucial role in improving plant growth, water status, and photosynthesis characteristics, particularly in salt-sensitive pepper genotypes, under moderate-to-high salinity levels. In conclusion, the plant growth, water status, and photosynthesis characteristics of the salt-sensitive pepper genotype were significantly improved by AMFs at medium and high salinity levels, such as 75 mM and 150 mM NaCl, respectively.

Precision Phenotyping of Wild Rocket (Diplotaxis tenuifolia) to Determine Morpho-Physiological Responses under Increasing Drought Stress Levels Using the PlantEye Multispectral 3D System

The PlantEye multispectral scanner is an optoelectrical sensor automatically applied to a mechatronic platform that allows the non-destructive, accurate, and high-throughput detection of morphological and physiological plant parameters. In this study, we describe how the advanced phenotyping platform precisely assesses changes in plant architecture and growth parameters of wild rocket salad (Diplotaxis tenuifolia L. [DC.]) under drought stress conditions. Four different irrigation supply levels from moderate to severe, required to keep 100, 70, 50, and 30% of the water-holding capacity, were adopted. Growth rate and plant architecture were recorded through the digital measure of biomass, leaf area, Canopy Light Penetration Depth, five convex hull traits, plant height, Surface Angle Average, and Voxel Volume Total. Vegetation color assessments included hue, lightness, and saturation. Vegetation and senescence indices were calculated from canopy reflectance in the red (620–645 nm), green (530–540 nm), blue (peak wavelength 460–485 nm), near-infrared (820–850 nm), and 3D laser (940 nm) ranges. The temperature, relative humidity, and solar radiation of the environment were also recorded. Overall, morphological parameters, color, multispectral data, and vegetation indices provided over 7200 data points through daily scans over three weeks of cultivation. Although a general decrease in growth parameters with increasing stress severity was observed, plants were able to maintain the same morpho-physiological performances as the control during the early growth stages, keeping both 70% and 50% of the total water-holding capacity. Among indices, the Normalized Differential Vegetation Index (NDVI) contributed the most to the differentiation between different stress levels during the cultivation cycle. Across the 3 weeks of growth, statistically significant differences were observed for all traits except for the Saturation Average. Comparisons with respect to the control highlighted the strong impact of drought stress on morphological plant traits. This study provided meaningful insights into the health status of wild rocket salad under increasing drought stress.

Nano Fertilizers: New Vistas towards Sustainable Agriculture and Climate Change Mitigation: A Review

To ensure the food and nutritional security of the burgeoning global population, food production needs to be doubled in developing countries by 2050. Currently, 30-40% of agriculture production predominantly relies on chemical fertilizers. Precise crop nutrition, low nutrient efficiency, maintaining soil fertility, less damage to soil flora and minimal environmental footprint are the major challenges in modern agriculture. Recent developments in the application of nanotechnology to produce agriculture inputs emerged as a sustainable solution for addressing the challenges in modern intensive agriculture by replacing synthetic bulk fertilizers with their nanoparticle size ( less than 100 nm), superior properties and smart delivery system. Nano fertilizers had the potential to fulfill the requirements of plant nutrition along with imparting sustainability in crop production without compromising the yield of the crops. Some of the current research studies have been reviewed in this paper with citation and these results showed that nano fertilizers have a substantial effect on plant growth, development and physiological parameters including chlorophyll content and photosynthetic activity, it depends on their composition, method and time of application. Their enhanced nutrient use efficiency, correlated with mitigating greenhouse gas emissions. Hence evolving as a cutting-edge approach for sustainable agriculture in climate change is enlightened in this review.

Influence of Foliar Treatment with Suspensions Rich in Trichoderma Chlamydospores on Momordica charantia Physiology, Yield, and Quality

Several strategies promote phyllosphere colonization by soil-born Trichoderma plant-beneficial strains. One of these strategies is foliar spraying with suspensions containing large amounts of chlamydospores—spores with thick cell wall structures that make them highly resistant to harsh environmental conditions. Trichoderma biomass was produced by cultivation on a cornmeal medium and compared with the biomass produced on potato dextrose broth by microscopic and thermogravimetric analyses. The analyses revealed increased chlamydospore content and thermostability in the fungal biomass produced on the corn meal medium. The Trichoderma suspension rich in chlamydospores was sprayed on bitter gourd (Momordica charantia) leaves at two inoculant concentrations, 106 and 108 ufc/mL. The effect of these treatments on the plant physiological parameters, leaf photosynthetic pigments, polyphenol and flavonoid contents, antioxidant activities of the leaves and fruits, and yield was compared to the control (plants sprayed with water) and to the experimental treatment involving spraying with 108 ufc/mL of propagules produced in potato dextrose broth. The effect of chlamydospore-rich suspensions on plant physiological parameters was more pronounced and long-lasting compared with the other treatments. The treatment with chlamydospore-rich suspension enhanced the accumulation of polyphenols and flavonoids in the leaves (by 17% and 50%, respectively) and fruits (by 18% and 31%, respectively) and increased the antioxidant activity. The Trichoderma treatment increased the yield by +25.33–53.07%. The application of the foliar treatment with Trichoderma suspensions did not modify the cytocompatibility of the extracts from the fruits determined on the L929 cells.

NaCl elicitation enhances metabolite accumulation and stress resilience in Inula crithmoides L. shoot cultures: implications for its nutritional and medicinal value

This study explored the impact of sodium chloride (NaCl) elicitation on the accumulation of primary and secondary metabolites and the oxidative stress responses of Inula crithmoides L. (golden samphire) in vitro shoot cultures. Elicitation involved applying different concentrations of NaCl (0, 50, 100, and 200 mM) for 4 weeks. This was followed by assessing its impact on plant growth, physiological parameters (pigments, hydrogen peroxide content, total soluble sugars and proteins, and proline), and secondary metabolism (phenylalanine ammonia-lyase activity, shikimic acid, phenolics, flavonoids, and hydroxycinnamic acids) in the shoots. The extracts were also analysed using high-performance liquid chromatography (HPLC). The NaCl elicitation did not affect shoot growth but increased physiological functions such as photosynthesis and oxidative stress management under moderate salinity levels. In addition, NaCl treatments increased the synthesis of soluble sugars and proteins, particularly proline, as well as bioactive phenolics such as gentisic acid, chlorogenic acid, 4-hydroxybenzoic acid, luteolin-7-O-glucoside, and naringenin-7-O-glucoside. The NaCl elicitation in golden samphire shoot cultures offers a significant method for enhancing the production of important nutritional and bioactive compounds. This underscores the species’ potential for cultivation in saline environments and provides valuable prospects for its utilization in the health and nutrition sectors.

Biosurfactant-Assisted Phytoremediation of Diesel-Contaminated Soil by Three Different Legume Species

This study aims to assess the impact of HydroBreak PLUS biosurfactant on the phytoremediation of diesel-contaminated soil by three legume plant species: Medicago sativa, Lotus corniculatus, and Melilotus albus. Legumes were grown in soil contaminated with diesel (4.0 g kg−1, 6.0 g kg−1) for 90 days, and the changes in soil diesel and nutrient concentrations, plant growth, and physiological parameters were measured. Diesel negatively affected the biomass production of all legumes, though the reduction in growth rate was observed only in L. corniculatus and M. albus. L. corniculatus had the highest diesel removal rate of 93%, M. albus had the lowest of 87.9%, and unplanted treatments had significantly lower diesel removal rates (up to 66.5%). The biosurfactant mitigated diesel-induced reduction in plant shoot and root weight and an increase in L. corniculatus root biomass (24.2%) were observed at 4.0 g kg−1 diesel treatment. The use of biosurfactant accelerated diesel removal from the soil, though the effect was diesel soil concentration and plant species-dependent. In unplanted treatments, the diesel removal rates increased by 16.4% and 6.9% in the treatments with 4 and 6 mg kg−1, respectively. The effect of biosurfactants on diesel removal by plants was less pronounced and reached 4.6% and 3.2% in the treatments with 4 and 6 mg kg−1, respectively. The study revealed that the phytoremediation efficiency could not be directly linked to plant physiological parameters as only M. sativa changes in plant growth corresponded well with photosystem II performance. Implementation of legumes and biosurfactants has a positive effect on soil quality by its enrichment with inorganic P and soluble phenols, while no enrichment in NO3− and NH4+ was observed.

Physio-biochemical and transcriptomics analyses reveal molecular mechanisms of enhanced UV-B stress tolerance in rice induced by titanium dioxide nanoparticles

ABSTRACT Rice (Oryza sativa L.) stands out as the world's most vital staple food crop, yet is susceptible to UV-B radiation stress. This study investigates the physiological and transcriptome responses in rice exposed to titanium dioxide nanoparticles (TiO2 NPs) under UV-B radiation. Results demonstrate that TiO2 NPs, applied alone (TN) or in combination with UV-B stress (UV+TN), significantly enhance rice plant growth and physiological parameters. Reactive oxygen species (ROS) levels, elevated under UV-B stress, are significantly reduced by TN and UV+TN treatments, thereby regulating antioxidants particularly involved in ascorbate-glutathione pathway. Transcriptomics analysis of identified DEGs in UV+TN, utilizing KEGG pathway analysis, reveals significant enrichment in various pathways. These pathways include glutathione metabolism, pyruvate metabolism, starch and sucrose metabolism, regulation of basal transcription factors, plant hormonal signal transduction pathways, cellular processes associated with energy, and the MAPK signaling pathway. Overall, TiO2 NPs application modulates diverse biological and metabolic pathways, enhancing UV-B stress tolerance in rice.

Influence of Magnesium Oxide (MgO) Nanoparticles on Maize (Zea mays L.)

An approximate revolution synthesis of magnesium oxide (MgO) nanoparticles has been prepared. For plant growth and development, MgO is essential. The effect and efficiency, respectively, in seed germination, seedling growth, and plant growth were also studied. These analyses examined maize with different concentrations and parameters. The concentration of 500 ppm was tested with extreme results in areas such as plant height, protein contents both in-vivo and in-vitro, and MgO effects shown both in shoot (12.83 ± 0.5 cm) and root (5.37 ± 0.5 cm). Maximum confirmations were fixed with the help of MgO NPs characterization through TEM, SEM, FTIR, zeta potential, and X-ray. The effect of MgO NPs showed a significant increase in root and shoot length, and simultaneous in-vivo studies also showed significant results in plant physiological parameters. In effect, the vital performance in germination rate, potential, and index MgO NPs was higher than the control. Moreover, the performance and absorption of MgO NPs was confirmed by physiological characterization with the help of a UV–Vis spectrophotometer applied to the leaves and roots. It was demonstrated that the influence of MgO NPs is positive and potentially can be used for seedling growth and also for plants. It may bolster farming methods, and help maintain high food quality, quantity, and production.

Predicting carob tree physiological parameters under different irrigation systems using Random Forest and Planet satellite images.

In the context of climate change, monitoring the spatial and temporal variability of plant physiological parameters has become increasingly important. Remote spectral imaging and GIS software have shown effectiveness in mapping field variability. Additionally, the application of machine learning techniques, essential for processing large data volumes, has seen a significant rise in agricultural applications. This research was focused on carob tree, a drought-resistant tree crop spread through the Mediterranean basin. The study aimed to develop robust models to predict the net assimilation and stomatal conductance of carob trees and to use these models to analyze seasonal variability and the impact of different irrigation systems. Planet satellite images were acquired on the day of field data measurement. The reflectance values of Planet spectral bands were used as predictors to develop the models. The study employed the Random Forest modeling approach, and its performances were compared with that of traditional multiple linear regression. The findings reveal that Random Forest, utilizing Planet spectral bands as predictors, achieved high accuracy in predicting net assimilation (R² = 0.81) and stomatal conductance (R² = 0.70), with the yellow and red spectral regions being particularly influential. Furthermore, the research indicates no significant difference in intrinsic water use efficiency between the various irrigation systems and rainfed conditions. This work highlighted the potential of combining satellite remote sensing and machine learning in precision agriculture, with the goal of the efficient monitoring of physiological parameters.

Improvement of Saline Soil Properties and Brassica rapa L. Growth Using Biofertilizers

The decline in agricultural productivity because of soil salinization has become a global problem in recent years. Biofertilizers show great potential for soil improvement as a sustainable strategy; however, their effectiveness in improving saline soils and enhancing plant growth under saline stress is poorly understood. We assessed the effectiveness of biofertilizers in improving saline soils and enhancing crop growth under saline stress and investigated the related potential mechanisms. Changes in soil physicochemical properties, plant physiological parameters, and soil microbial communities were analyzed using pot experiments. The results showed that biofertilizer application reduced total soluble salts in the soil by 30.8% and increased Brassica rapa L. biomass by 8.4 times. Biofertilizer application increased soil organic matter, total nitrogen, and available phosphorus by 56.1%, 57.0%, and 290%, respectively. Simultaneously, superoxide dismutase, catalase, chlorophyll a, chlorophyll b, total soluble sugar, and proline levels also increased by 89.5%, 140%, 110%, 190%, and 130%, respectively. Biofertilizers increased the abundance of Bacillus and Planococcus and decreased the abundance of Mortierella and Aspergillus, which could potentially be the underlying reason for the promotion of plant growth. Overall, the results of this study demonstrate the efficacy of biofertilizers in improving saline soils and that the application of biofertilizer could greatly promote agricultural production.

Paenibacillus lentimorbus alleviates nutrient deficiency-induced stress in Zea mays by modulating root system architecture, auxin signaling, and metabolic pathways.

Paenibacillus lentimorbus reprograms auxin signaling and metabolic pathways for modulating root system architecture to mitigate nutrient deficiency in maize crops. The arable land across the world is having deficiency and disproportionate nutrients, limiting crop productivity. In this study, the potential of plant growth-promoting rhizobacteria (PGPR) viz., Pseudomonas putida, Paenibacillus lentimorbus, and their consortium was explored for growth promotion in maize (Zea mays) under nutrient-deficient conditions. PGPR inoculation improved the overall health of plants under nutrient-deficient conditions. The PGPR inoculation significantly improved the root system architecture and also induced changes in root cortical aerenchyma. Based on plant growth and physiological parameters inoculation with P. lentimorbus performed better as compared to P. putida, consortium, and uninoculated control. Furthermore, expression of auxin signaling (rum1, rul1, lrp1, rtcs, rtcl) and root hair development (rth)-related genes modulated the root development process to improve nutrient acquisition and tolerance to nutrient-deficient conditions in P. lentimorbus inoculated maize plants. Further, GC-MS analysis indicated the involvement of metabolites including carbohydrates and organic acids due to the interaction between maize roots and P. lentimorbus under nutrient-deficient conditions. These findings affirm that P. lentimorbus enhance overall plant growth by modulating the root system of maize to provide better tolerance to nutrient-deficient condition.

Water Deficit Diagnosis of Winter Wheat Based on Thermal Infrared Imaging

Field experiments were conducted to analyze the effectiveness of the crop stress index (CWSI) obtained by infrared thermal imaging to indicate crop water status, and to determine the appropriate CWSI threshold range for wheat at different growth stages. The results showed that the sensitivity of plant physiological parameters to soil water was different at different growth stages. The sensitivity of stomatal conductance (Gs) and transpiration rate (Tr) to soil water was higher than that of leaf relative water content (LRWC) and photosynthetic rate (Pn). The characteristics of plant physiology and biomass (yield) at each growth stage showed that the plant production would not suffer from drought stress as long as the soil water content (SWC) was maintained above 57.0% of the field water capacity (FWC) during the jointing stage, 63.0% of the FWC during the flowering stage and 60.0% of the FWC during the filling stage. Correlation analysis showed that the correlation of CWSI with Gs, Tr and Pn was lower than that with LRWC and SWC at the jointing stage. CWSI was extremely significantly negatively correlated with SWC and LRWC (p < 0.01), but significantly negatively correlated with Gs, Tr and Pn (p < 0.05). At the flowering stage, CWSI was extremely significantly negatively correlated with all physiological and soil parameters (p < 0.01). The regression analysis showed that the CWSI of winter wheat was correlated with biomass (grain yield) in a curvilinear relationship at each growth stage. When the CWSI increased to a certain extent, the biomass and yield showed a decreasing trend with the increase in CWSI. Comprehensive analysis of all indexes showed that CWSI can be used as a decision-making index to guide the water-saving irrigation of winter wheat, as long as the CWSI threshold of plants was maintained at 0.26–0.38 during the jointing stage, 0.27–0.32 during the flowering stage and 0.30–0.36 during the filling stage, which could not only avoid the adverse effects of water stress on crop production, but also achieve the purpose of water saving.

Enhancing Salt Tolerance in Poplar Seedlings through Arbuscular Mycorrhizal Fungi Symbiosis.

Poplar (Populus spp.) is a valuable tree species with multiple applications in afforestation. However, its growth in saline areas, including coastal regions, is limited. This study aimed to investigate the physiological mechanisms of arbuscular mycorrhizal fungi (AMF) symbiosis with 84K (P. alba × P. tremula var. glandulosa) poplar under salt stress. We conducted pot experiments using NaCl solutions of 0 mM (control), 100 mM (moderate stress), and 200 mM (severe stress) and evaluated the colonization of AMF and various physiological parameters of plants, including photosynthesis, biomass, antioxidant enzyme activity, nutrients, and ion concentration. Partial least squares path modeling (PLS-PM) was employed to elucidate how AMF can improve salt tolerance in poplar. The results demonstrated that AMF successfully colonized the roots of plants under salt stress, effectively alleviated water loss by increasing the transpiration rate, and significantly enhanced the biomass of poplar seedlings. Mycorrhiza reduced proline and malondialdehyde accumulation while enhancing the activity of antioxidant enzymes, thus improving plasma membrane stability. Additionally, AMF mitigated Na+ accumulation in plants, contributing to the maintenance of a favorable ion balance. These findings highlight the effectiveness of using suitable AMF to improve conditions for economically significant tree species in salt-affected areas, thereby promoting their utilization.

Effect of atmospheric emissions on ecological and physiological parameters of plants

Effect of atmospheric emissions on ecological and physiological parameters of plants

Physiological response of Phlox paniculata L. varieties to different growing conditions of Western Siberia

Physiological indicators of plants are essential characteristics of plant adaptation to adverse environmental factors. Phlox paniculata varieties (originated from North America) introduced into the southern taiga subzone of Western Siberia experience stress caused by numerous factors. The physiological response to different growing conditions of the southern taiga subzone of Western Siberia was analyzed for 3 varieties of Ph. paniculata. The study employed handheld optical instruments for vital analysis of plant physiological parameters: a compact LI-600P porometer (LI-COR) and a CI-710 leaf spectrometer (CID Bio-Science). Stomatal conductance of phlox leaves in partial shade studied with respect to different varieties was found to virtually remain unchanged. The studied varieties exhibit different degree of resistance to water deficiency. The variety ‘Stanislas’ was found to be resistant to insufficient soil humidity and light, it can be grown in both moderately shaded areas and arid conditions. The studied varieties showed high indices of anthocyanins and carotenoids under good light conditions and natural humidity, which indicates these conditions as the most stressful for Ph. paniculata due to a high degree of water and temperature stress. The greatest difference in the measured indices was found for the variety ‘Antarktida’, which indicates its susceptibility to water deficiency.

Effect of Form of Silicon and the Timing of a Single Foliar Application on Sugar Beet Yield

The aim of the study was the evaluation of silicon foliar application on sugar beet yield. In the years 2017–2019, the effect of a single foliar application of various forms of silicon (potassium silicate—PS, calcium silicate—CS, sodium metasilicate—SM, and orthosilicic stabilized acid—OSA) applied in the six-leaf phase of sugar beet, 7 and 14 days later on yield and technological quality of sugar beet roots was assessed. It was found that the form of silicon does not have a significant effect on the yield of sugar beet roots, and significantly modifies the biological yield of sugar and the pure sugar yield. The highest biological yield of sugar is achieved by the foliar application of PS, and the pure sugar yield by PS and OSA. The date of foliar application as well as the interaction of the date of application and silicon forms do not have a significant effect on the root yield, biological yield of sugar, and pure sugar yield. The form of silicon has a significant effect on the technological quality of sugar beet roots (sugar, α-amino nitrogen, potassium, and sodium content). The most beneficial effect on the sugar content and reduction of sodium content in sugar beet roots is the foliar application of OSA, and the reduction of α-amino nitrogen and potassium content—PS. The timing of the application of various forms of silicon has a significant effect on the sugar and potassium content in sugar beet roots. The most beneficial effect on the sugar content in the roots is the application carried out 7 days after the six-leaf phase of sugar beet, and the potassium content is most limited by the treatment 14 days after reaching this phase. The interaction of the timing of foliar application and the form of silicon significantly modifies the technological quality features of sugar beet roots: the content of sugar, α-amino nitrogen, potassium, and sodium. The results of the study proved the significant effect of silicon foliar application on the physiological parameters of plants, such as leaf area index (LAI), absorption of photosynthetically active radiation (PAR) and normalized difference vegetation index (NDVI) which are related to yield and sugar beet productivity.