Physiochemical Characteristics Research Articles

Integrated aerobic-anaerobic digestion of highly solids-loaded corn stover and swine manure under dynamic aeration: Temperature rise, physicochemical characteristics, and methane production

This research aimed to design an integrated aerobic-anaerobic reactor with dynamic aeration that was automatically regulated based on real-time oxygen concentration and investigate the aerobic pretreatment and subsequent dry co-anaerobic digestion (co-AD) characteristics of highly solids-loaded corn stover and swine manure in terms of temperature rise, physiochemical characteristics, and methane production. The high-temperature feedstocks from the aerobic pretreatment phase rapidly entered the AD phase without transportation and effectively improved the start-up and methane production of the co-AD. Oxygen concentration range, aeration rate, and pretreatment time affected the cumulative aeration time, temperature rise, and organic matter removal interactively during aerobic pretreatment, and a low aeration rate was relatively preferable. Although the lignocellulose removal increased with the increase in pretreatment duration, the maximal lignin elimination efficiency only reached 1.30%. The inoculum injection in the transition phase from aerobic pretreatment to co-AD and the leachate reflux during co-AD were also critical for producing methane steadily apart from aerobic pretreatment. The cold air weakened the temperature rise of aerobic pretreatment, and the low-temperature leachate reduced the methane production in the co-AD process. An oxygen concentration range of 13%–17%, aeration rate of 0.10 m3/(min·m3), pretreatment time of 84 h, inoculum loading of 40%, leachate refluxing thrice per day, and double-layer inoculation were optimum for improving the integrated aerobic-anaerobic digestion system's ability to resist low temperatures and achieving high methane production. The maximal cumulative and volatile solids (VS) methane yields of corn stover and swine manure reached 444.58 L and 266.30 L/kg VS.

Assessment of Antimicrobial and Cytotoxic Activities of Liposomes Loaded with Curcumin and Lippia origanoides Essential Oil

(1) Introduction: Curcumin and Lippia origanoides essential oils have a broad spectrum of biological activities; however, their physicochemical instability, low solubility, and high volatility limit their therapeutic use. Encapsulation in liposomes has been reported as a feasible approach to increase the physicochemical stability of active substances, protect them from interactions with the environment, modulate their release, reduce their volatility, improve their bioactivity, and reduce their toxicity. To date, there are no reports on the co-encapsulation of curcumin and Lippia origanoides essential oils in liposomes. Therefore, the objective of this work is to prepare and physiochemical characterize liposomes loaded with the mixture of these compounds and to evaluate different in vitro biological activities. (2) Methods: Liposomes were produced using the thin-layer method and physiochemical characteristics were calculated. The antimicrobial and cytotoxic activities of both encapsulated and non-encapsulated compounds were evaluated. (3) Results: Empty and loaded nanometric-sized liposomes were obtained that are monodisperse and have a negative zeta potential. They inhibited the growth of Staphylococcus aureus and did not exhibit cytotoxic activity against mammalian cells. (4) Conclusions: Encapsulation in liposomes was demonstrated to be a promising strategy for natural compounds possessing antimicrobial activity.

Groundwater Chemistry in Jind District: Physiochemical Appraisal and Drinking Water Quality Assessment

It is essential to have access to safe drinking water, particularly in rural regions where groundwater is the primary water source. The physicochemical quality of the groundwater in Jind District, Haryana, India, has been evaluated in this research. Six hundred samples were collected from thirty different places, and the following physiochemical characteristics were measured: pH, total dissolved solids, total hardness, alkalinity, electrical conductivity, calcium, magnesium, sodium, potassium, nitrate, fluoride, and sulfate. The World Health Organization, the Bureau of Indian Standards, the Indian Council of Medical Research, and other regulatory bodies' standards were compared to these results. Most of the necessary criteria were found to be within acceptable levels; however, total hardness, calcium, and magnesium were found to be greater than recommended in certain areas. The Water Quality Index states that the declining quality of the groundwater in certain areas makes it unfit for human consumption. In addition to providing critical information to assist mitigation measures and ensure the provision of sustainable and clean water resources for the population of the Jind district in the state of Haryana, this research highlights the need of regular monitoring

Groundwater Chemistry in Jind District: Physiochemical Appraisal and Drinking Water Quality Assessment

It is essential to have access to safe drinking water, particularly in rural regions where groundwater is the primary water source. The physicochemical quality of the groundwater in Jind District, Haryana, India, has been evaluated in this research. Six hundred samples were collected from thirty different places, and the following physiochemical characteristics were measured: pH, total dissolved solids, total hardness, alkalinity, electrical conductivity, calcium, magnesium, sodium, potassium, nitrate, fluoride, and sulfate. The World Health Organization, the Bureau of Indian Standards, the Indian Council of Medical Research, and other regulatory bodies' standards were compared to these results. Most of the necessary criteria were found to be within acceptable levels; however, total hardness, calcium, and magnesium were found to be greater than recommended in certain areas. The Water Quality Index states that the declining quality of the groundwater in certain areas makes it unfit for human consumption. In addition to providing critical information to assist mitigation measures and ensure the provision of sustainable and clean water resources for the population of the Jind district in the state of Haryana, this research highlights the need of regular monitoring

Effects of Incorporating Ionic Crosslinking on 3D Printing of Biomass–Fungi Composite Materials

Biomass–fungi composite materials primarily consist of biomass particles (sourced from agricultural residues) and a network of fungal hyphae that bind the biomass particles together. These materials have potential applications across diverse industries, such as packaging, furniture, and construction. 3D printing offers a new approach to manufacturing parts using biomass–fungi composite materials, as an alternative to traditional molding-based methods. However, there are challenges in producing parts with desired quality (for example, geometric accuracy after printing and height shrinkage several days after printing) by using 3D printing-based methods. This paper introduces an innovative approach to enhance part quality by incorporating ionic crosslinking into the 3D printing-based methods. While ionic crosslinking has been explored in hydrogel-based bioprinting, its application in biomass–fungi composite materials has not been reported. Using sodium alginate (SA) as the hydrogel and calcium chloride as the crosslinking agent, this paper investigates their effects on quality (geometric accuracy and height shrinkage) of 3D printed samples and physiochemical characteristics (rheological, chemical, and texture properties) of biomass–fungi composite materials. Results show that increasing SA concentration led to significant improvements in both geometric accuracy and height shrinkage of 3D printed samples. Moreover, crosslinking exposure significantly enhanced hardness of the biomass–fungi mixture samples prepared for texture profile analysis, while the inclusion of SA notably improved cohesiveness and springiness of the biomass–fungi mixture samples. Furthermore, Fourier transform infrared spectroscopy confirms the occurrence of ionic crosslinking within 3D printed samples. Results from this study can be used as a reference for developing new biomass–fungi mixtures for 3D printing in the future.

The physiochemical characteristics and glycerolipid profile of Cycas panzhihuaensis in response to individual and combined drought and freezing temperature stress

The frequency and intensity of the occurrence of drought (D) events during winter are increasing in most areas of China. To explore the interactive effects of D and freezing temperature (F) on plants of endangered Cycas panzhihuaensis, some physiochemical characteristics and the lipid profile were determined. Drought and F stress had no or little impact on the traits of leaves, which, however, bleached following a combination of D and F treatment (DF). Drought treatment did not affect the chlorophyll fluorescence parameters and the flavonoid content of C. panzhihuaensis. Besides the increase in flavonoid content, a decrease of photochemical efficiency and an increase of heat dissipation were induced by both F and DF treatment, with the effects being greater in the latter treatment. The malondialdehyde content decreased significantly and the total antioxidant capacity increased significantly in the plants exposed to both D and DF treatments. The D treatment did not impact the amount of phospholipids but led to an accumulation of saccharolipids. Additionally, the amount of both phospholipids and saccharolipids remained unchanged following F treatment but decreased significantly following DF treatment compared with those of the control. The unsaturation level did not change significantly in most lipid classes of membrane glycerolipids following various stresses but increased significantly in phosphatidylserine, monogalactosylmonoacylglycerol, digalactosyldiacylglycerol and sulphoquinovosyldiacylglycerol following D or both D and F treatments. Generally, plants of C. panzhihuaensis showed relatively strong tolerance to individual D stress, while D aggravated the F-induced damage, which was likely caused by the degradation of the membrane glycerolipids.

Engineered bacterial cellulose-based Ag nanoparticles/g-C3N4/Eucalyptus extract nanocomposites for wound dressing: in vitro evaluation

In recent years, antibacterial wound dressings have gained considerable attention. Bacterial cellulose (BC) has received significant interest due to its unique physiochemical characteristics such as biocompatibility, high porosity, superior mechanical properties, water holding capacity, and nontoxicity. In this work, silver nanoparticles/graphitic carbon nitride/eucalyptus extract (Ag/gCN/EE) nanocomposite was synthesized as an antibacterial agent and incorporated into nanofibrous structures composed of BC. The BC/Ag/gCN/EE and polyvinyl alcohol/BC/Ag/gCN/EE (PVA/BC/Ag/gCN/EE) nanocomposites were synthesized using immersion and electrospinning methods, respectively. Then, the swelling ratio was optimized and the wound dressings were prepared based on the optimal formulation. The release profile, biodegradability and mechanical properties of the wound dressings were assessed. The antibacterial property of Ag/gCN/EE was studied demonstrating strong antibacterial activity on E. coli and S. aureus. MTT assay was carried out on NIH 3T3 fibroblast cells, and BC/Ag/gCN/EE and PVA/BC/Ag/gCN/EE nanocomposites showed 89 ± 2.31% and 96 ± 3.28% viability, respectively and no toxicity. To assess the effect of the composites on in vitro wound healing and cell migration, scratch wound assay was performed. The results indicated that after 24 h, BC/Ag/gCN/EE and PVA/BC/Ag/gCN/EE reduced 18.69 and 23.97% of the scratch area compared to the control group. The prepared composites are promising wound dressings that could accelerate wound healing and kill bacteria simultaneously.

Influence of preharvest fungicides on decay incidence and fruit quality of mango fruits during storage

AbstractMango fruits' quality, marketability, and shelf life are significantly influenced by postharvest decay. Mango fruit disease development during storage is inhibited by fungicides. The objective of this investigation was to assess the relative effectiveness of two fungicides, azoxystrobin 18.2% + difenoconazole 11.4% SC and hexaconazole 5% SC, in mitigating postharvest deterioration of mango cv. ‘Langra’ during low temperature storage. Three pathogens were found associated with postharvest decay of mango, i.e. Colletotrichum gloeosporioides, Alternaria alternata, and Penicillium expansum. In comparison to untreated ones, the preharvest application of fungicide treatments provided noticeably better disease control. The foliar application of azoxystrobin 18.2% + difenoconazole 11.4% SC (0.1%) 15 days before the harvesting of fruits significantly improved fruit firmness, soluble solid content, titratable acidity, reduced the disease incidence, percentage disease index, and lesion diameter followed by the application of hexaconazole 5% SC (0.1%) compared to the control. Furthermore, it was found that pre-harvest fungicide spraying of azoxystrobin 18.2% + difenoconazole 11.4% SC (0.1%) was an effective treatment for lowering postharvest deterioration and enhancing the physio-chemical characteristics of mango fruits during low-temperature storage.

Vegetation at the former open-pit Ningyo-toge mine, 36 years after closure treatment: Impact of soil cover on woody plant establishment and dominance of the perennial herb Miscanthus sinensis

Soil cover is a prevailing method used at mine sites to ensure the safety of hazardous materials and restore ecological functions when the base materials are unfavorable for plant growth. The former open-pit Ningyo-toge Mine was backfilled with overburden and neutralized smelting residues and covered with soil in 1987. After 36 years, the vegetation remained dominated by the perennial herb Miscanthus sinensis, and woody plant establishment did not progress successfully. This study investigated the factors that inhibited woody plant establishment at the site. The soil profile survey revealed that the soil cover formed Bg horizons (pseudogley soil) with cloudy mottling, representative of poorly drained soil. In the Bg horizon, woody plant roots of Pinus densiflora and Weigela hortensis exhibited growth inhibition. Elemental analysis revealed that in the Bg horizon the roots of P. densiflora and W. hortensis accumulated high Fe concentrations exceeding 10,000 mg/kg DW at critical levels. Our results suggested that woody plant roots in the Bg horizon may have suffered from chronic oxygen deficiency accompanied by excessive Fe stress in the soil cover. Topsoil water content (<50 mm) and microtopographic features were not critical factors disrupting woody plant establishment because some individuals were growing in areas with high soil water content, exceeding 60%. Considering that woody plant roots were developed primarily in the shallow A horizon, A horizon formation by M. sinensis is a key step in initiating woody plant establishment by improving the soil structure and physiochemical characteristics of the soil cover, such as carbon content, exchangeable nutrients, and air-filled porosity. For successful mine pollution control and vegetation recovery, implementing an appropriate topsoil system, such as native forest soil, loosely graded and minor infiltration layer above the overburden would be necessary.

The Impact of Silicon on the Morphological and Physio-Chemical Characteristics of Calendula officinalis Exposed to Arsenic-Induced Toxicity

The Impact of Silicon on the Morphological and Physio-Chemical Characteristics of Calendula officinalis Exposed to Arsenic-Induced Toxicity

Aged garlic extract preserves beta-cell functioning via modulation of nuclear factor kappa-B (NF-κB)/Toll-like receptor (TLR)-4 and sarco endoplasmic reticulum calcium ATPase (SERCA)/Ca2+ in diabetes mellitus

BackgroundPeripheral insulin resistance and compromised insulin secretion from pancreatic β-cells are significant factors and pathogenic hallmarks of diabetes mellitus (DM). NF-κβ/TLR-4 and SERCA/Ca2+ pathways have been identified as potential pathways regulating insulin synthesis by preserving pancreatic β-cell functioning. The current study aimed to evaluate the therapeutic effect of aged garlic extract (AGE) against DM in a streptozotocin (STZ)-induced rat model with particular emphasis on pancreatic β-cell functioning.MethodsAGE was characterized by gas chromatography-mass spectrometry (GC-MS), Fourier-transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM) to evaluate its physio-chemical characteristics followed by in-vitro anti-diabetic and antioxidant potential. This was followed by the induction of DM in laboratory animals for investigating the therapeutic action of AGE by evaluating the role of NF-κβ/TLR-4 and the SERCA/Ca2+ pathway. The parameters assessed in the present experimental setup encompassed antioxidant parameters, metabolic indicators, insulin concentration, intracellular calcium levels, apoptotic markers (CCK-8 and Caspase Glo-8), and protein expression (P-62 and APACHE-II).ResultsAGE characterization by SEM, GC-MS, and X-ray diffraction (XRD) revealed the presence of phenylalanine, alliin, S-allylmercaptocysteine (SAMC), tryptophan, 1-methyl-1,2,3,4-tetrahydro-β-carboline-3-carboxylic acid as major bioactive constituents of AGE. Metabolic studies, including intraperitoneal glucose tolerance test (IPGTT), revealed significantly lower blood glucose levels in the AGE group compared to the disease control group. In contrast, the intraperitoneal insulin tolerance test (ITT) exhibited no significant difference in insulin sensitivity between the AGE supplementation group and the DM control group. Interestingly, AGE was found to have no significant effect on fasting glucose and serum insulin levels. In contrast, AGE supplementation was found to cause significant hypoglycaemia in postprandial blood glucose and insulin levels. Importantly, AGE causes restoration of intracellular Ca2+ levels by modulation of SERCA/Ca2 functioning and inhibition NF-κB/TLR-4 pathway. AGE was found to interact with and inhibit the DR-5/ caspase-8/3 apoptotic complex. Furthermore, microscopic studies revealed degeneration and apoptotic changes in pancreatic β-cells of the DM control group, while supplementation of AGE resulted in inhibition of apoptotic pathway and regeneration of pancreatic β-cells.ConclusionThe current study suggests that AGE enhance glucose homeostasis by exerting their effects on pancreatic β-cells, without ameliorating peripheral sensitivity. Moreover, AGEs promote an increase in β-cell mass by mitigating the apoptosis of pancreatic β-cells. These findings suggest that AGE could aid in developing a viable alternative therapy for diabetes mellitus (DM).

Recent Progress Using Graphene Oxide and Its Composites for Supercapacitor Applications: A Review

Supercapacitors are prospective energy storage devices for electronic devices due to their high power density, rapid charging and discharging, and extended cycle life. Materials with limited conductivity could have low charge-transfer ions, low rate capability, and low cycle stability, resulting in poor electrochemical performance. Enhancement of the device’s functionality can be achieved by controlling and designing the electrode materials. Graphene oxide (GO) has emerged as a promising material for the fabrication of supercapacitor devices on account of its remarkable physiochemical characteristics. The mechanical strength, surface area, and conductivity of GO are all quite excellent. These characteristics make it a promising material for use as electrodes, as they allow for the rapid storage and release of charges. To enhance the overall electrochemical performance, including conductivity, specific capacitance (Cs), cyclic stability, and capacitance retention, researchers concentrated their efforts on composite materials containing GO. Therefore, this review discusses the structural, morphological, and surface area characteristics of GO in composites with metal oxides, metal sulfides, metal chalcogenides, layered double hydroxides, metal–organic frameworks, and MXene for supercapacitor application. Furthermore, the organic and bacterial functionalization of GO is discussed. The electrochemical properties of GO and its composite structures are discussed according to the performance of three- and two-electrode systems. Finally, this review compares the performance of several composite types of GO to identify which is ideal. The development of these composite devices holds potential for use in energy storage applications. Because GO-modified materials embrace both electric double-layer capacitive and pseudocapacitive mechanisms, they often perform better than pristine by offering increased surface area, conductivity, and high rate capability. Additionally, the density functional theory (DFT) of GO-based electrode materials with geometrical structures and their characteristics for supercapacitors are addressed.

Maize/soybean intercropping increases nutrient uptake, crop yield and modifies soil physio-chemical characteristics and enzymatic activities in the subtropical humid region based in Southwest China

Intercropping, a widely adopted agricultural practice worldwide, aims to increase crop yield, enhance plant nutrient uptake, and optimize the utilization of natural resources, contributing to sustainable farming practices on a global scale. However, the underlying changes in soil physio-chemical characteristics and enzymatic activities, which contribute to crop yield and nutrient uptake in the intercropping systems are largely unknown. Consequently, a two-year (2021–2022) field experiment was conducted on the maize/soybean intercropping practices with/without nitrogen (N) fertilization (i.e., N0; 0 N kg ha−1 and N1; 225 N kg ha−1 for maize and 100 N kg ha−1 for soybean ) to know whether such cropping system can improve the nutrients uptake and crop yields, soil physio-chemical characteristics, and soil enzymes, which ultimately results in enhanced crop yield. The results revealed that maize intercropping treatments (i.e., N0MI and N1MI) had higher crop yield, biomass dry matter, and 1000-grain weight of maize than mono-cropping treatments (i.e., N0MM, and N1MM). Nonetheless, these parameters were optimized in N1MI treatments in both years. For instance, N1MI produced the maximum grain yield (10,105 and 11,705 kg ha−1), biomass dry matter (13,893 and 14,093 kg ha−1), and 1000-grain weight (420 and 449 g) of maize in the year 2021 and 2022, respectively. Conversely, soybean intercropping treatments (i.e., N0SI and N1SI) reduced such yield parameters for soybean. Also, the land equivalent ratio (LER) and land equivalent ratio for N fertilization (LERN) values were always greater than 1, showing the intercropping system’s benefits in terms of yield and improved resource usage. Moreover, maize intercropping treatments (i.e., N0MI and N1MI) and soybean intercropping treatments (i.e., N0SI and N1SI) significantly (p < 0.05) enhanced the nutrient uptake (i.e., N, P, K, Ca, Fe, and Zn) of maize and soybean, however, these nutrients uptakes were more prominent in N1MI and N1SI treatments of maize and soybean, respectively in both years (2021 and 2022) compared with their mono-cropping treatments. Similarly, maize-soybean intercropping treatments (i.e., N0MSI and N1MSI) significantly (p < 0.05) improved the soil-based N, P, K, NH4, NO3, and soil organic matter, but, reduced the soil pH. Such maize-soybean intercropping treatments also improved the soil enzymatic activities such as protease (PT), sucrose (SC), acid phosphatase (AP), urease (UE), and catalase (CT) activities. This indicates that maize-soybean intercropping could potentially contribute to higher and better crop yield, enhanced plant nutrient uptake, improved soil nutrient pool, physio-chemical characteristics, and related soil enzymatic activities. Thus, preferring intercropping to mono-cropping could be a preferable choice for ecologically viable agricultural development.

Exogenous Glycinebetaine Regulates the Contrasting Responses in Leaf Physiochemical Attributes and Growth of Maize under Drought and Flooding Stresses.

Flooding and drought are the two most devastating natural hazards limiting maize production. Exogenous glycinebetaine (GB), an osmotic adjustment agent, has been extensively used but there is limited research on its role in mitigating the negative effects of different abiotic stresses. This study aims to identify the different roles of GB in regulating the diverse defense regulation of maize against drought and flooding. Hybrids of Yindieyu 9 and Heyu 397 grown in pots in a ventilated greenhouse were subjected to flooding (2-3 cm standing layer) and drought (40-45% field capacity) at the three-leaf stage for 8 d. The effects of different concentrations of foliar GB (0, 0.5, 1.0, 5.0, and 10.0 mM) on the physiochemical attributes and growth of maize were tested. Greater drought than flooding tolerance in both varieties to combat oxidative stress was associated with higher antioxidant activities and proline content. While flooding decreased superoxide dismutase and guaiacol peroxidase (POD) activities and proline content compared to normal water, they all declined with stress duration, leading to a larger reactive oxygen species compared to drought. It was POD under drought stress and ascorbate peroxidase under flooding stress that played crucial roles in tolerating water stress. Foliar GB further enhanced antioxidant ability and contributed more effects to POD to eliminate more hydrogen peroxide than the superoxide anion, promoting growth, especially for leaves under water stress. Furthermore, exogenous GB made a greater increment in Heyu 397 than Yindieyu 9, as well as flooding compared to drought. Overall, a GB concentration of 5.0 mM, with a non-toxic effect on well-watered maize, was determined to be optimal for the effective mitigation of water-stress damage to the physiochemical characteristics and growth of maize.

Hepatotoxicity of titanium dioxide nanoparticles.

The food additive E171 (titanium dioxide, TiO2), is widely used in foods, pharmaceuticals and cosmetics. It is a fine white powder, with at least one third of its particles sized in the nanoparticulate (˂100 nm range, TiO2 NPs). The use of E171 is controversial as its relevant risk assessment has never been satisfactorily accomplished. In vitro and in vivo studies have shown dose-dependent toxicity in various organs including the liver. TiO2 NPs have been shown to induce inflammation, cell death and structural and functional changes within the liver. The toxicity of TiO2 NPs in experimental models varies between organs and according to their physiochemical characteristics and parameters such as dosage and route of administration. Among these factors, ingestion is the most significant exposure route, and the liver is a key target organ. The aim of this review is to highlight the reported adverse effects of orally administered TiO2 NPs on the liver and to discuss the controversial state of its toxicity.

Influence of phase transition with annealing temperature on structural, morphological, and supercapacitive characteristics of molybdenum oxide nanostructures

In this study, molybdenum oxide nanostructures (MoO3 NSs) were effectively synthesized through a simple, low-cost, surfactant-free, low-temperature, and scalable chemical co-precipitation method and investigated their synergistic effect with annealing temperature on energy storage applications for the first time. Herein, we have reported a phase transition of MoO3 NSs from hexagonal to orthorhombic after the annealing temperature varied from 100°C to 500°C at constant time. Additionally, the resultant NSs were thoroughly examined for their physio-chemical characteristics, which revealed the stable phase formation of the MoO3 NSs, respectively. Furthermore, the electroactive MoO3 NSs were pasted on Ni-foam substrate (M@NF), and electrochemical properties were evaluated using a three-electrode setup at room-air temperature in 1 M KOH aqueous electrolyte across the potential range of 0 V to 0.786 V. As a result, the M@NF-5 electrode exhibited an impressive specific capacitance of 976.84 F g−1 at a scan rate of 1 mV s−1, a higher energy density of 73.69 Wh kg−1, and a power density of 655 W kg−1 at 5 mA g−1. The non-linear galvanostatic charge-discharge (GCD) profile aligns well with the cyclic voltammetry (CV) analysis. Both CV and GCD techniques confirm the pseudocapacitive behavior, with 83% capacitive retention observed after 2000 cycles. The fabricated symmetric device (M@NF-5//M@NF-5) exhibits enhanced electrochemical performance with a specific capacitance of 67.35 F g−1 at 5 mA g−1 and with an energy density of 18 Wh kg−1, and a power density of 1750 W kg−1 at a specific current. These findings underscore the potential of chemically deposited α-MoO3 as an auspicious material for use in supercapacitor applications.

Physio-chemical and Phytochemical Characteristics of a Lesser-known Wild Edible Fruit of Mizoram, Elaeagnus pyriformis Hook. F. (Family Elaeagnaceae): Need for its Proper Domestication

The lesser-known yet incredibly nourishing wild edible fruit Elaeagnus pyriformis Hook.f. is found in the north-eastern mountainous states of India. Elaeagnus pyriformis fruits were collected from three villages in Champhai District, Mizoram, with the goal of analysing their physio-chemical and phytochemical qualities in order to determine its potential for domestication. Measurements were made of the fruit's physical characteristics, including its length, diameter, weight, and moisture content. Juice was extracted, and total soluble solids (TSS), titrable acidity, ascorbic acid, reducing sugar, total sugar, non-reducing sugar, and sugar:acid ratio were among the chemical parameters that were examined afterward. The existence of several beneficial substances was determined by phytochemical screening. Physical and chemical differences between the samples from various villages were found to be significantly varied, according to the results. Ruantlang produced the highest titrable acidity, whereas Zotlang had the maximum fruit weight, length, TSS, reducing sugar, total sugar, non-reducing sugar, and flavonoid content. Fruit diameter, the ratio of sugar to acid, and the total phenolic content were all highest in Hmunhmeltha. The fruit's phytochemical examination identified flavonoids, terpenoids, alkaloids, tannins, and cardiac glycosides.

Effect of Storage Conditions on the Physicochemical and Processing Qualities of Different Potato Genotypes Grown in Eastern Uganda

The favourable environment in Eastern Uganda enables the growth of potato (Solanum tuberosum). However, it’s limited by lack of improved genotypes and inappropriate storage facilities. To address this, new potato genotypes including four CIP clones and four varieties from other regions were introduced by development partners. They also constructed ambient storage structures in Kapchorwa Municipality (1,800 m), Bennet (2,300 m), and Mbale City (1,200 m). This study was therefore designed to investigate the effectiveness of the ambient stores in maintaining the quality of the potato genotypes. During the study, the mean storage temperature ranged from 15.42oC in Bennet to 22.80oC in Mbale while the mean relative humidity ranged from 84.73% in Bennet to 79.58% in Mbale. The results showed significant (P&lt; 0.05) differences due to variety. Storage duration and conditions led to a significant (P&lt; 0.05) decline in the desired physiochemical characteristics and processing qualities of the stored potato genotypes. Potato genotype Victoria had the highest level of reducing sugars (0.08%) and least acceptable chip colour while Rwangume had the lowest reducing sugars (0.05%) and a more acceptable chip colour. In general, altitude and potato genotype influenced changes in the physicochemical and processing qualities of the potato genotypes during storage.

Physicochemical and sensory characteristics of sugar-free sapodilla jam with yeast extract addition

The aim of this study is to develop a sugar-free sapodilla jam incorporated with isomalto-oligosaccharide and different concentrations of yeast extract as humectant and to analyze the physiochemical and sensory characteristics of sugar-free sapodilla jam. Analysis of water activity (Aw), degree of Brix, 72h syneresis, chromaticity, and sensory evaluation was conducted. The increased addition of yeast extract, increase the lumpiness and grittiness of the product, decreases the water activity therefore decreasing the occurred syneresis and increasing the lightness (L*) of the product and simultaneously decreasing the Red (a*) and Yellow (b*) chromaticity. In the hedonic test, using a 7-point scale, 0.2% is more preferred when using yeast extract, while in the JAR test with 5-point scale, the sample with 0.3% yeast extract has fewer penalty in the penalty analysis.

Precisely adjusting the interface adhesion of carbon fiber/epoxy composites by regulating the micro-configuration of graphene oxide nanosheets on the fiber surface

Different micro-configurations of graphene oxide (GO) nanosheets on the carbon fiber (CF) surface, including the distribution and size, endow CF-GO enhanced microstructure and physiochemical characteristics of the CF/epoxy (CF/EP) composites. In order to investigate the relationship between the GO micro-configuration and the interfacial adhesion of the CF/EP, here, polyether imide (PEI)-GO heterogeneous reinforcement was grafted onto the CF surface (CF-PEI-GO) by precisely modulating the mass ratio of CFs to GO. The micro-configuration and properties of the CF-PEI-GO hybrids, together with the thickness and modulus variation of the interface layer are investigated, in order to make certain on the enhancement mechanisms of both interfacial and mechanical performances. Optimal performances of the CF-PEI-GO/EP composites are achieved with a CF/GO mass ratio of 40:1. The uniformly “upright” distribution of moderate-size GO on the CF surface induces a synergistic effect of improved mechanical interlocking, chemical bonding, high wettability, and effective interface adhesion, which are stemmed from higher surface roughness, more active functional groups, higher surface energy, and wider interface thickness with gradient descent modulus. This work presents a valid, practical strategy to precisely control the interfacial adhesion of the CF/EP composites by adjusting the micro-configuration of 2D materials on the fiber surface.