Physicochemical Characteristics Research Articles

Dietary Influence on Growth, Physicochemical Stability, and Antimicrobial Mechanisms of Antimicrobial Peptides in Black Soldier Fly Larvae

Safe antibiotic substitutes are needed given the rise in antimicrobial resistance, environmental contamination, and stringent antibiotic regulations. Insect-derived antimicrobial peptides (AMPs) are promising candidates due to their antimicrobial activity, stability, and safety. This study investigates the antimicrobial mechanism of crude AMP extracts and their physicochemical characteristics in black soldier fly larvae (BSFL). The results indicated that BSFL reared on a wheat bran diet exhibited significantly improved growth performance and AMP production when compared to the other three diets. AMP extracts showed enhanced antimicrobial activity and physicochemical stability, including temperatures and metal ions except Cu+. Moreover, AMP extracts disrupted the cell membrane and inhibited the cell cycle of Staphylococcus aureus (S. aureus), thus exhibiting antimicrobial activity. Furthermore, transcriptomic and KEGG enrichment analyses identified 509 differentially expressed genes (DEGs) related to the Toll and IMD signaling pathways. STRING and GeneMANIA analyses confirmed the association of these pathways with immune response and AMP secretion. qRT-PCR results showed elevated expression of immune genes (GNBP3, NFKBIA, GADD45, and Spz) in BSFL following S. aureus immunization, consistent with RNA-seq findings. These findings offer a valuable reference for using AMPs as antibiotic substitutes in animal feeds and highlight the need for further research on AMP purification and the synergistic regulation of protein synthesis and AMP production in BSFL.

Non-Covalent Interactions of Lotus Root Polysaccharides and Polyphenols and their Regulatory Mechanism on Macrophage Functions

Despite the interaction between polyphenols and polysaccharides in food products, their specific non-covalent interactions and effects on macrophage functions are not well understood. Therefore, the interaction and mechanism of purified lotus root polysaccharide (PLRP) with polyphenols, and the regulatory mechanisms of the PLRP-polyphenol complex on the macrophage functionals were studied. By combining ferulic acid (FA) and chlorogenic acid (CHA) with PLRP, the complexes PLRP-FA, PLRP-CHA and the physical mixtures PLRP&FA and PLRP&CHA were prepared, where their mass ratios of polyphenols to PLRP were 143.97 and 601.67 mg g−1. Nuclear magnetic resonance (NMR), Fourier-transform infrared (FTIR), Ultraviolet (UV), and Transmission electron microscopy (TEM) analyses confirmed that PLRP and polyphenols may engage in non-covalent interactions via hydrogen bonds and hydrophobic interactions. We confirmed that non-covalent interactions led to high molecular weight, dense complexes. Both PLRP and its polyphenol complexes stimulated NO production by macrophages to varying degrees without exacerbating lipopolysaccharide-induced inflammatory responses. PLRP and PLRP-polyphenol complexes repaired cells with impaired antioxidant capacity, depending on doses. Those results indicated that after the combination of lotus root polysaccharide and polyphenol, the molecular weight and conformation changed significantly, which influenced the biological activity. RNA-seq analysis suggested that the regulatory mechanism of PLRP-polyphenol complex in macrophages may mainly involve oxidative phosphorylation, FoxO, TNF, IL-17, MAPK, NF-kappa B, and other signaling pathways. This study investigated the effects of polyphenol binding on the physicochemical characteristics and functional activities of polysaccharides, which provided references for the development of polysaccharide functional products and the control of nutritional quality.

Encapsulation of Rifampicin in Solid Lipid Nanoparticles by Microwave‐Assisted Microemulsion Method

AbstractRifampicin (RF) is a potent antibiotic, but its clinical effectiveness is limited by poor water solubility and stability. To overcome these limitations, RF is encapsulated in solid‐lipid nanoparticles (SLNs) using a one‐pot microwave microemulsion method. This study aimed to synthesize and characterize RF‐loaded SLNs, evaluating their physicochemical characteristics and antimicrobial efficacy. The synthesized SLNs exhibit particle sizes ranging from 150 to 200 nm, with a high encapsulation efficiency of ≈55% and high loading capacity. The particles are imaged by cryogenic‐transmission electron microscopy and found to be circular and elongated, with RF homogenously distributed throughout the particles. The RF‐loaded SLNs demonstrate potent antimicrobial activity, as evidenced by disc diffusion assays. The SLNs exhibits a sustained drug release profile, highlighting their potential as an effective drug delivery system for antimicrobial treatment. These findings suggest that SLNs can enhance the stability, bioavailability, and therapeutic efficacy of hydrophobic drugs like RF.

SODA LIME SILICATE GLASSES CONTAINING IRON OXIDE - IN VITRO EVALUATION

Three glasses with different iron oxide concentrations (between 5 and 8.1 mol %) were obtained in the CaO - Na2O - SiO2 - Fe2O3 system by using conventional melting-quenching technique. The amorphous nature of the synthesized materials is confirmed by X-ray diffraction analysis, XRD. The physico-chemical and structural characterization of the glasses was performed by measuring their density, refractive indices, as well as by calculating the molar volume, oxygen packing density and recording the infrared spectra by Fourier Transformed Infrared Spectroscopy, FT-IR, respectively. The glasses were evaluated in vitro by examining bone-like apatite formation on their surfaces in a simulated body fluid, SBF. The structural changes in the glasses during the in-vitro test were traced by means of FT-IR and Scanning Electron Microscopy, SEM. The solutions were examined by Inductively Coupled Plasma Optical Emission Spectroscopy, ICP-OES to determine the ion exchange between the glasses and the starting SBF and the corresponding effect on the pH was also recorded.

First report on the physicochemical and proteomic characterization of Proteus mirabilis outer membrane vesicles under urine-mimicking growth conditions: comparative analysis with Escherichia coli

IntroductionUropathogenic bacteria employ multiple strategies to colonize the urinary tract, including biofilm formation, invasion of urothelial cells, and the production of adhesins, toxins, and siderophores. Among the most prevalent pathogens causing urinary tract infections (UTIs) are Uropathogenic Escherichia coli and Proteus mirabilis. A notable feature of Gram-negative bacteria is their ability to produce outer membrane vesicles (OMVs), which play critical roles in bacterial survival, virulence, and host-pathogen interactions, including UTIs.MethodsIn this study, OMVs were isolated and characterized from two clinical strains, E. coli U144 and P. mirabilis 2,921, cultured in both Luria-Bertani broth and artificial urine.Result and discussionThe OMVs ranged in size from 85 to 260 nm, with the largest vesicles observed in artificial urine. Proteomic analysis allowed the identification of 282 proteins in OMVs from E. coli and 353 proteins from P. mirabilis when cultured LB medium, while 215 were identified from E. coli and 103 from P. mirabilis when cultured in artificial urine. The majority of these proteins originated from the bacterial envelope, while others were linked to motility and adhesion. Notably, the protein composition of OMVs varied depending on the growth medium, and proteins associated with zinc and iron uptake being more prominent in artificial urine, suggesting their importance in the urinary environment. Crucially, this is the first report to characterize P. mirabilis OMVs under different culture conditions, offering novel insights into the role of OMVs in UTI pathogenesis. These findings provide a deeper understanding of the molecular mechanisms by which OMVs contribute to bacterial virulence, establishing the foundation for potential therapeutic interventions targeting OMV-mediated processes in UTIs.

Effect of chickpea on the physicochemical, nutritional, antioxidant, and organoleptic characterization of corn extrudates.

Ready-to-eat snacks are very popular. However, they have a high glycemic index and lack proteins & micronutrients. This study prepared protein-enriched corn extrudates by adding chickpea grit supplements at varying concentrations (0-100 g kg-1). The protein contents of 100 g kg-1 supplemented extrudates increased by 66.66% and dietary fiber contents increased by 48.02% in comparison with the control. Bulk density increased by 1.46 times. However, the expansion ratio, porosity, and water absorption index decreased significantly (P < 0.05). The health-promoting characteristics of the extrudates increased in comparison with the control sample, i.e., total phenolic content increasing by 17.84%, 2,2-diphenyl-1-picrylhydrazyl radical (DPPH) contents by 11.38%, and 2,2-azinobis-3-ethylbenzothiazoline-6-sulfonic acid (ABTS) content by 9.59%. Likewise, the potassium contents increased by 24.63% with the inclusion of 10% chickpea in corn extrudates. Sensory evaluation revealed that corn extrudates with up to 60 g kg-1 added chickpea achieved the highest acceptability among panelists. The addition of chickpea produced corn extrudates with higher protein and mineral content, which could mitigate malnutrition. © 2024 Society of Chemical Industry.

Effect of Presodiation Additive on Structural and Interfacial Stability of Hard Carbon | P2‐Na0.66Mn0.75Ni0.2Mg0.05O2 Full Cell

AbstractThe compatibility between a corncob‐derived hard carbon anode and a layered oxide cathode (Na0.66Mn0.75Ni0.2Mg0.05O2), as well as the effect of presodiation via cathode additive (Na2C4O4), are investigated in a sodium‐ion full cell. Extensive physicochemical and electrochemical characterizations are performed to deeply investigate the structural and interfacial evolution of the materials in the presodiated cell, either within the single cycle or upon long‐term cycling. The use of sacrificial cathode additives is generally regarded as a method to improve full cell performance, especially when using sodium‐deficient materials. However, undesired effects upon decomposition of the sacrificial salt may arise due to the complexity of the system. In this study, it is evidenced that the presodiation changes the properties of the electrodes causing a worsening of the electrochemical performance of the cell during long‐term cycling. The surface morphology of the cathode is negatively affected by the formation of holes/cracks, while redox processes associated with structural transformations are suppressed in the voltage window of interest, with partial structural deformations occurring during activation cycles. The SEI and CEI are also affected by the formation of insulating organic species, which lead to an increased thickness and interphase resistance hampering the charge transfer kinetics of the cell.

Gamma-irradiated copper-based metal organic framework nanocomposites for photocatalytic degradation of water pollutants and disinfection of some pathogenic bacteria and fungi.

Although there are many uses for metal-organic framework (MOF) based nanocomposites, research shows that these materials have received a lot of interest in the field of water treatment, namely in the photodegradation of water contaminants, and disinfection of some pathogenic bacteria and fungi. This is brought on by excessive water pollution, a lack of available water, low-quality drinking water, and the emergence of persistent micro-pollutants in water bodies. Photocatalytic methods may be used to remove most water contaminants, and pathogenic microbes, and MOF is an excellent modifying and supporting material for photocatalytic degradation. This work involved the fabrication of a unique Cu-MOF based nanocomposite that was exposed to gamma radiation. The nanocomposite was subsequently employed for photocatalytic degradation and as an antimicrobial agent against certain harmful bacteria and fungi. The produced Cu-MOf nanocomposite was identified by XRD, SEM, and EDX. Growth curve analysis, UV lighting impact, and antibiofilm potential have been carried outto check antimicrobial potential. Additionally, the membrane leakage test was used to determine the mechanism of the antimicrobial action. In an experimental investigation of photocatalytic activity, a 50 mL aqueous solution including 10.0 ppm of Rhodamine B (RB) was used to solubilize 10 mg of Cu-MOF. It has been investigated how pH and starting concentration affect RB elimination by Cu-MOF. Ultimately, RB elimination mechanism and kinetic investigations have been carried out. SEM images from the characterization techniques demonstrated the fact that the Cu-MOF was synthesized effectively and exhibited the Cu-MOF layers' flake-like form. Uneven clusters of rods make up each stratum. The primary peaks in the Cu-MOF's diffraction pattern were found at 2θ values of 8.75◦, 14.83◦, 17.75◦, 21.04◦, 22.17◦, 23.31◦, 25.41◦, and 26.38◦, according to the XRD data. After 135 min of UV irradiation, only 8% of RB had undergone photolytic destruction. On the other hand, the elimination resulting from adsorption during a 30-min period without light was around 16%. Conversely, after 135 min, Cu-MOF's photocatalytic breakdown of RB with UV light reached 81.3%. At pH 9.0, the greatest removal of RB at equilibrium was found, and when the amount of photocatalyst rose from 5 to 20mg, the removal efficiency improved as well. The most sensitive organism to the synthesized Cu-MOF, according to antimicrobial data, was Candida albicans, with a documented MIC value of 62.5µgmL-1 and antibacterial ZOI as32.5mm after 1000ppmtreatment. Cu-MOF also showed the same MIC (62.5µgmL-1)values against Staphylococcus aureus and Escherichia coli, and 35.0 and 32.0mm ZOI after 1000ppmtreatment, respectively. Ultimately, it was found that Cu-MOF (1000µg/mL) after having undergone gamma irradiation (100.0kGy) was more effective against S. aureus (42.5mm ZOI) and E. coli (38.0mm ZOI). From the obtained results, the synthesized MOFnanocomposites had promising catalytic degradation of RB dye and high antimicrobial potential which encouraging their use in wastewater treatment against some pathogenic microbes and polluted dyes. Due to the exceptional physicochemical characteristics of MOFnanocomposites, it is possible to create and modify photocatalytic nanocomposites in a way that improves their recovery, efficiency, and recyclability.

Efficient one-pot green synthesis of carboxymethyl cellulose/folic acid embedded ultrafine CeO2 nanocomposite and its superior multi-drug resistant antibacterial activity and anticancer activity.

Due to the prevalence of drug-resistant bacteria and the ongoing shortage of novel antibiotics as well as the challenge of treating breast cancer, the therapeutic and clinical sectors are consistently seeking effective nanomedicines. The incorporation of metal oxide nanoparticles with biological macromolecules and an organic compound emerges as a promising strategy to enhance breast cancer treatment and antibacterial activity against drug-resistant bacteria in various biomedical applications. This study aims to synthesize a unique nanocomposite consisting of CeO2 embedded with folic acid and carboxymethyl cellulose (CFC NC) via a green precipitation method using Moringa oleifera. Various spectroscopic and microscopic analyses are utilized to decipher the physicochemical characteristics of CFC NC and active phytocompounds of Moringa oleifera. Antibacterial study against MRSA (Methicillin-resistant Staphylococcus aureus) demonstrated a higher activity (95.6%) for CFC NC compared to its counterparts. The impact is attributed to reactive oxygen species (ROS), which induces a strong photo-oxidative stress, leading to the destruction of bacteria. The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of CFC NC are determined as 600µg/mL and 1000µg/mL, respectively. The anticancer activity against breast cancer cell resulted in the IC50 concentration of 10.8μg/mL and 8.2μg/mL for CeO2 and CFC NC respectively.The biocompatibility test was conducted against fibroblast cells and found 85% of the cells viable, with less toxicity. Therefore, the newly synthesized CFC NC has potential applications in healthcare and industry, enhancing human health conditions.

Antiproliferative and Morphological Effects of Fenretinide Lipid Nanosystems in Colon Adenocarcinoma Cells

Objective: Colon adenocarcinoma is characterized by the downregulation of the retinoic acid receptor, making natural retinoids such as all-trans retinoic acid, 9-cis retinoic acid and 13-cis retinoic acid effective in treatment and chemoprevention due to their ability to increase RARβ expression. However, major limitations to their use include tolerability and acquired resistance. In this study, we evaluated fenretinide, a semisynthetic derivative of all-trans retinoic acid, in an HT-29 cell line. Fenretinide was evaluated both as a free drug and encapsulated in self-assembling phosphatidylcholine nanosystems with the aim of increasing the aqueous solubility and cell availability of the drug. Methods: Fenretinide was encapsulated in lipid nanosystems obtained in water by the dispersion of an amphiphilic mixture of phospholipids, glyceryl tributyrate and polysorbate 80. The physico-chemical characterization of the nanosystems was carried out by dynamic light scattering and spectrophotometry. The biological activity was evaluated by quantitative phase imaging microscopy, MTT assay, flow cytometry and confocal laser-scanning fluorescence microscopy. Results: Fenretinide in phosphatidylcholine nanosystems was more active than free fenretinide in inhibiting HT-29 cells’ proliferation, as indicated by quantitative phase imaging data. Indeed, encapsulated fenretinide increased duplication time, decreased dry mass and decreased the rate of cell growth more efficiently than fenretinide. Moreover, encapsulated fenretinide effectively decreased the motility of the cells that survived the treatment. Conclusions: The results indicate that the proposed nanosystems can be considered a valuable alternative to natural retinoids in the chemoprevention and treatment of colorectal cancer. This is due to the favorable pharmacologic characteristics of fenretinide in colorectal cancer and the improved drug activity provided by nanoencapsulation.

Amphiphilic Gelator-Based Shear-Thinning Hydrogel for Minimally Invasive Delivery via Endoscopy Catheter to Remove Gastrointestinal Polyps.

Injectable polymeric hydrogels delivered via endoscopic catheter have emerged as promising submucosal agents, offering durable, long-lasting cushions to enhance the efficacy of endoscopic submucosal dissection (ESD) for the removal of small, flat polyps from the gastrointestinal tract (GIT). However, polymer-based injections do not meet the easy-injectability criteria via catheter because their high viscosity tends to clog the catheter needle. To the best of knowledge, for the first time, report the fabrication of an amphiphile-based small molecule hydrogel of diglycerol monostearate (DGMS)thatself-assembles to form hydrogel (DGMSH) for delivery via an endoscopic catheter. Physicochemical characterization of the hydrogel reveals its fibrous morphology, shear-thinning behaviour, and easy injectability, along with its scalability and long shelf-life (6 months). Ex vivo studies on the goat's stomach and intestine demonstrate the ease of injectability through the catheters and the development of visible submucosal cushion depots with the desired height. Moreover, the hydrogel can encapsulate both hydrophobic and hydrophilic drugs/dyes. In vivo studies in small animals have found that the hydrogel depot is durable, biocompatible, non-immunogenic, and has a hemostatic effect. Endoscopic studies in the porcine model demonstrate a safe injection and endoscopic excision of GI polyps acting as a suitable agent for ESD.

Experimental Study of Sugarcane Bagasse Ash as Partial Replacement of Cement Based on SEM and XRF Analysis

This research aims to identify chemical composition and it’s leaching from concrete mixed with sugarcane bagasse ash. By manipulating percent of slump flow at 110±5%, sugarcane bagasse ash was employed as a pozzolanic material to partially replace cement at 0, 10, 20, 30, 40, and 50 percent by weight of binder in concrete. Cube specimens were cast and cured in water for 3, 7, 14 and, 28 days, respectively. The patterns of sugarcane bagasse ash morphology were performed by using Scanning Electron Microscope (SEM) to analyze physicochemical characteristics. Results of tests on the X-ray fluorescence (XRF) analysis from the ash and curing water at various times revealed that SiO2 made up half of the components in sugarcane bagasse ash. Al2O3, CaO, Fe2O3, K2O, P2O5, and MgO were the minor components. The calcium content from the 14-day period at 50% by weight of the sugarcane bagasse ash binder was higher than that of the other elements, according to the results of curing water. According to the results of 28-day water curing, potassium outnumbered all other elements in the replacement of sugarcane bagasse ash in every ratio.

Bio-sorption of methylene blue using Datura stramonium leaves as adsorbent

Present study was accomplished to prospect the viability of using the Datura stramonium leaves powder (DS) as an adsorbent to remove the methylene blue from aqueous solution. The physico-chemical characteristics of the studied adsorbent were examined. The optimum parameters such as contact time, particle size, absorbent dose, initial methylene blue concentration, and pH were investigated by performing batch experiments models. The kinetics and the isotherms adsorption were evaluated by varying the initial concentration and using the optimum parameters. The optimum of contact time is 30min, with a removal capacity of 89.60 %. The optimal adsorbent concentration to reach the maximum removal of methylene blue (89.54 %) is 18 g/L. An initial methylene blue concentration of 50 ppm is ideal to reach the maximum capacity of removal (92.72 %). The optimum particle size is 80 mm. The kinetics of the adsorption process are in accordance with the pseudo-second order model. Experimental values of the adsorption capacity are close proximity to the optimum values predicted by the pseudo-second order model. Langmuir, Freundlich, Temkin, Dubinin-Radushkevich, Harkin-Jura and Hasley isotherms were applied to represent the data obtained from the adsorption studies. The highest R2 values were related to Freundlich, Dubinin-Radushkevich and Hasley isotherm models.

EFFECT OF PARTIALLY REPLACING SOYBEAN MEAL AND SOYBEAN OIL WITH DEHULLED SUNFLOWER SEEDS ON MEAT QUALITY AND OXIDATIVE STABILITY OF BROILERS

Broiler chicken (Gallus gallus domesticus L.) production in Mexico is fundamental for contributing to food security since it is inexpensive and has a high nutritional value. However, given the insufficient national production of ingredients such as soybeans to obtain oil and make balanced foods, it has been necessary to import them, thus increasing the cost of raising broilers. In this context, sunflower seed (Helianthus annuus L.), due to its nutritional makeup, can be used to replace soybean meal and soybean oil in broiler diets. The purpose of this study was to evaluate the effect of partially replacing soybean meal and soybean oil in broilers’ diets with dehulled sunflower seeds on the physicochemical properties, fatty acid profile, and antioxidant capacity of meat. The experimental design was completely randomized: basal diet (sorghum-soybean meal); diet with 5 % sunflower seed and soybean oil; diet with 5 % sunflower seeds without soybean oil; and diet with 10 % sunflower seeds without soybean oil. There was no effect of the diet on the physicochemical characteristics (p &gt; 0.05), but there was an effect on the fatty acid profile, which was better (p ≤ 0.001) in the treatments with sunflower seed, with or without soybean oil. The antioxidant activity in raw and cooked meat decreased after 9 and 6 days of refrigerated storage (p ≤ 0.05), respectively, without diet effect. Therefore, soybean meal can be substituted at 10 %, and soybean oil can be partially or completely replaced by dehulled sunflower seed in broiler diets as long as production parameters are not negatively affected.

Structured Fruit Cube Snack of BRS Vitoria Grape with Gala Apple: Phenolic Composition and Sensory Attributes

This study developed a structured fruit cube (FC) snack using only natural ingredients, specifically red grape and apple, without hydrocolloids and sucrose. After development, physicochemical characterization and analysis of phenolic compounds (PCs), including anthocyanins, flavonols, and hydroxycinnamic acid derivatives, using HPLC-DAD-ESI-MS/MS, were conducted. Sensory quality was also assessed through an acceptance and sensory profile analysis using the rate-all-that-apply methodology. The results showed that the FC had physicochemical characteristics similar to other structured fruits that use hydrocolloids. Additionally, they presented a complex composition of PCs, predominantly including anthocyanins derived from malvidin (tri-substituted methoxylated anthocyanins), notably cumarylated ones. Flavonols compounds comprised the 3-glucoside series of myricetin, quercetin, laricitrin, kaempferol, isorhamnetin, and syringetin; the 3-galactoside series of myricetin and quercetin; and the 3-glucuronic acid series of myricetin and quercitin, along with rutin. The presence of caftaric acid, coutaric acid, fertaric acid, and p-coumaroyl-glucose was also detected, alongside caffeic acid-O-glucoside 1, caffeic acid-O-glucoside 2, chlorogenic acid, 4-O-p-coumaroylquinic acid, and dicaffeoylquinic acid. In conclusion, the selection of natural ingredients was technologically suitable for obtaining an FC. Despite using conventional drying at 60 °C, the product showed notable concentrations of PCs and also achieved great sensory acceptance.

Exudados gomosos de Prosopis spp. localizados en Ecuador: potencial prebióticos en la alimentación animal

Fiber-rich plant foods have been tested as prebiotics (adjuvant to the growth and activity of the gut microbiota) in animal production, due to their high inulin and fiber content, in order to reduce the use of antibiotics and microbial resistance. The gummy exudate produced by Acacia senegal is a source of nutritional fiber that has been tested as a prebiotic in animal feed. The objective of this study was to analyze the potential use of novel sources of Prosopis spp. gummy exudates as prebiotics in animals of zootechnical interest based on a systematic literature review in indexed journals of the use of gum-hydrocolloids as an alternative supplement in animal feed. The scientific articles reviewed show the benefits of using the gummy exudate of Acacia senegal as a prebiotic in the production of broilers, turkeys, rabbits, and pigs. The gums obtained from Prosopis spp. present physicochemical and nutritional characteristics analogous to those published for gum arabic. Therefore, based on the bibliographic reports consulted, the gummy exudate obtained from Prosopis spp trees located in Ecuador could present a nutritional profile with excellent fiber content, oligosaccharides, essential minerals, and phenolic compounds, which would enhance its use as a promising prebiotic in animal feed, improving the function of the intestinal barrier, favoring the growth of beneficial microbiota, significantly reducing the populations of pathogenic bacteria, optimizing animal welfare and production. Keywords: dietary fiber, hydrocolloids, animal production, alternative growth promoters.

Preparation and optimization of hydrophilic modified pullulan encapsulated tetracycline for significant antibacterial and anti-biofilm activity against Stenotrophomonas maltophilia isolates.

The study aimed to assess the effectiveness of these formulations against S. maltophilia in terms of their antimicrobial and anti-biofilm properties. The physicochemical characteristics of HM-PULL-Tetracycline were analyzed using a field scanning electron microscope, X-ray dispersion, Zeta potential, and dynamic light scattering analysis. The antibacterial and anti-biofilm activity was assessed using minimal biofilm inhibitory concentration and broth micro-dilution. In addition, the biocompatibility of HM-PULL-Tetracycline was assessed by investigating its cytotoxicity on the human diploid fibroblasts (HDF) normal cell line using the MTT test. The HM-PULL-Tetracycline formulation successfully prevented biofilm formation, measuring 179.7± 2.66 nm in size and with an encapsulation efficiency of 84.86± 3.14%. It exhibited a biofilm growth inhibition rating of 69% and significantly down-regulated the expression of the smf-1, rpfF, rmlA, and spgM biofilm genes in S. maltophilia strains (p<0.05). Furthermore, the HM-PULL-Tetracycline formulation exhibited a 4 to 6-fold increase in antibacterial efficacy compared to unbound tetracycline. The HM-PULL-Tetracycline formulation demonstrated cell viability of over 90% at all doses tested against HDF normal cells. The findings of the current investigation demonstrate that HM-PULL-Tetracycline enhances the bactericidal and anti-biofilm properties without causing harm to healthy human cells. This suggests that Could be a promising approach for medication administration.

An Oxygen‐Self‐Produced Nanoplatform Based on MnO2 for Relieving Hypoxia

AbstractManganese dioxide (MnO2) nanoparticles are increasingly recognized for their potential in biomedical applications, particularly in the realm of hypoxic cancer therapy, due to their unique physicochemical characteristics. This investigation introduces a novel, template‐free synthesis strategy. The reducing groups inherent in bovine serum albumin (BSA) facilitate a redox reaction with potassium permanganate (KMnO4), while the abundance of functional groups in BSA is instrumental in the formation of MnO2. The transmission electron microscopy (TEM) analysis has characterized the synthesized MnO2 nanoparticles, termed BM NPs, as spherical particles with a mean diameter of 210 nm and zeta potential of −40.1 mV measured by dynamic light scattering (DLS). The Fourier transform infrared (FT‐IR) spectrum of BM NPs exhibits the characteristic peak of MnO2 at 1113 cm−1 and 620 cm−1. Furthermore, the elemental composition of BM NPs has been ascertained through energy‐dispersive X‐ray (EDX) elemental mapping analysis. Though concentration of BM NPs up to 200 μg/mL, the survival rate of 4T1 cells remained approximately 75 %. Given that BM NPs at a concentration of 100 μg/mL significantly alleviate cellular hypoxia, the high oxygen‐generating capacity of these nanoparticles is proved, suggesting their suitability as a drug delivery system, especially in the context of hypoxic tumor microenvironments.

A review on green waste composting, role of additives and composting methods for process acceleration.

Effective disposal of green waste has been a challenging task faced by urban bodies for a long time. Composting can be an effective method to manage green waste by recovering nutrients that can be used as organic manure. However, there are some limitations to green waste composting, such as a low degradation rate and the requirement for high manpower and space. Many researchers have studied ways to minimize the limitations of green waste composting through different approaches. These include the use of co-composting materials, inoculating agents, and process modifications such as multi-stage composting. In this review, we systematically summarized the physicochemical characteristics of green waste and green waste compost, optimum ratios of additives, and process modifications during the composting of green waste reported in various articles. This review is helpful for early-career researchers and individuals new to the field of green waste composting by providing them with key concepts and recent developments in the field. The study suggests that the sustainable selection of additives or methods for composting green waste should depend on resource availability, climatic conditions, and the characterization of the feedstock.

Exploring the Acetobacteraceae family isolated from kombucha SCOBYs worldwide and comparing yield and characteristics of biocellulose under various fermentation conditions

Bacterial cellulose (BC) is a cellulosic biopolymer produced by specific acetic acid bacteria during kombucha fermentation. In this study, bacterial cellulose-producing strains were isolated from four different global kombucha SCOBY samples obtained from markets in the Netherlands, America, China, and Iran. The strains were identified using biochemical and molecular techniques. The ability of species to produce BC was evaluated under both static and stirred fermentation conditions. Seven dominant strains from the Acetobacteraceae family and the genus of Komagataeibacter and Gluconacetobacter were identified and submitted to NCBI gene bank archives: K. xylinus CH1, K. sucrofermentans IR2, K. intermedius IR3, K. cocois AM2, K. sucrofermentans NE4, K. cocois NE6, and G. liquefaciens NE7. Among these, K. intermedius IR3, isolated from local Iranian SCOBY, exhibited the highest BC production yield at 5.733 ± 0.170 gL−1 under static fermentation conditions. On the other hand, K. xylinus CH1, from Chinese SCOBY, had the highest yield under stirred conditions, producing 12.689 ± 0.808 gL−1 of BC. The BC production yield of both K. xylinus CH1 and K. intermedius IR3 under stirred conditions was 3 and 1.3 times more than static conditions, respectively. Despite the yield differences, static fermentation demonstrated superior physicochemical characteristics; such as moisture content, water holding capacity, and crystallinity degree, compared to stirred. Therefore, depending on the intended application in industry and specific criteria, both products could serve as functional substitutes in food and medicine sectors.