Photothermal Signal Research Articles

“Dandelion” magnetic bead-driven CDs@CeO2 based-multifunctional nanoplatform for tri-modal ultrasensitive detection and efficient eradication of pathogenic bacteria

To address the challenge of foodborne pathogens, we have developed an ultra-sensitive tri-modal detection and effective pathogen eradication strategy utilizing a “dandelion” magnetic bead-driven cerium dioxide doped with carbon dots (CDs@CeO2) multifunctional nanoplatform. Aptamer (Apt) modification CDs@CeO2 specifically recognizes and binds to the outer membrane proteins of Salmonella typhimurium (S. typhimurium). Concurrently, mannose-functionalized dandelion-like magnetic beads selectively recognize adhesins of S. typhimurium, avoiding competition with Apt for binding sites and leveraging the strong bacterial capture capability for high-sensitivity detection. The prepared CDs@CeO2 has been demonstrated to exhibit favourable fluorescence characteristics. In the presence of H2O2, CDs@CeO2 is capable of oxidising colourless 3,3',5,5'-tetramethylbenzidine (TMB) into blue oxide, displaying exceptional photothermal properties. CDs@CeO2 have the potential to generate •OH through a Fenton-like reaction, which could directly damage cells. Notably, coupling the photosensitizer Ce6 to CDs@CeO2 and subsequent illumination generates 1O2, which synergistically eradicates bacteria with •OH. Detection limits of the fluorescence, colorimetry, and photothermal methods were 3.85 cfu/mL, 9.44 cfu/mL, and 5.00 cfu/mL, respectively. The platform successfully achieves precise detection of S. typhimurium in actual pre-prepared food samples through fluorescence, colorimetry, and photothermal tri-modal signals, and effectively kills bacteria, achieving trace detection and source control.

Quantitative photothermal investigation of nonradiative recombination parameters in GaAs/InAs(QD)/GaAs quantum dot structures using a three-layer laser beam deflection model

In this paper, we developed a theoretical model for the photothermal deflection technique in order to investigate the electronic parameters of three-layer semiconductor structures. This model is based on the resolution of thermal and photogenerated carrier diffusion-wave equations in different media. Theoretical results show that the amplitude and phase of the photothermal deflection signal is very sensitive to the nonradiative recombination parameters. The theoretical model is applied to one layer of InAs quantum dots (QDs) inserted in GaAs matrix InAs/GaAs QDs in order to investigate the QD density effects on nonradiative recombination parameters in InAs through fitting the theoretical photothermal beam deflection signal to the experimental data. It was found that the minority carrier lifetime and the electronic diffusivity decrease as functions of increasing InAs QD density. This result is also related to the decrease in the mobility from 21.58 to 4.17 (±12.9%) cm2/V s and the minority carrier diffusion length from 0.62 (±5.8%) to 0.14 (±10%) μm, respectively. Furthermore, both interface recombination velocities S2/3 of GaAs/InAs (QDs) and S1/2 of InAs (QDs)/GaAs increase from 477.7 (±6.2%) to 806.5 (±4%) cm/s and from 75 (±7.8%) to 148.1 (±5.5%) cm/s, respectively.

A highly sensitive Photothermal Immunochromatographic test strip for detection of aflatoxin B1 based on CoS@TA Nanospheres

A novel photothermal immunochromatographic test strip (PITS) with tannic acid (TA) modified cobalt sulfide (CoS) nanospheres (CoS@TA) as immuno-probe element was developed for the detection of aflatoxin B1 (AFB1). CoS nanospheres (CoS NPs) with excellent photothermal conversion efficiency (η = 47.5 %) was synthesized and skillfully chelated with TA to improve its dispersion, biocompatibility, and chromatographic properties. After modification, the CoS@TA coupled with monoclonal antibody (mAb) against AFB1 (CoS@TA-mAb) by simple physical adsorption. The CoS@TA based PITS achieved highly sensitive detection of AFB1 with the limit of detection in photothermal signal (photothermal-LOD) of 0.00503 μg/L, which was 19.88-fold higher than the LOD in visual signal (visual-LOD, 0.1 μg/L). The application of TA in the modification of CoS provided ideas to improve the properties of functional nanomaterials such as dispersion and biocompatibility, and the application of CoS@TA in PITS construction laid a methodological foundation for further improving the detection sensitivity of trace targets.

An integrated three-signal biosensor based on phage multifunctional probe for simultaneous and ultrasensitive detection of live /dead Listeria monocytogenes

The simultaneous and sensitive detection of live/dead bacteria in food samples is crucial for the control and prevention of foodborne pathogen contamination. Herein, a novel three-signal biosensor for simultaneous and ultrasensitive detection of live/dead Listeria monocytogenes (L.m) was developed. Concretely, a phage/prussian blue nanoparticles (PBNPs) and phage/polyethyleneimine@magnetic nanoparticles (PEI@MNPs) multifunctional probes were prepared. In the presence of L.m, a sandwich complex of phage/PBNPs-L.m-phage/PEI@MNPs was formed and separated by magnetic field. With the lytic activity of phages, the bioluminescent signal generated by adenosine triphosphate (ATP) was utilized for the quantification of live L.m. Photothermal and colorimetric signals triggered by the PBNPs could quantitative determination of total L.m. The combined results of total/live bacteria detection facilitate the calculation of dead bacteria. Bioluminescent signal allows for the precise detection of live L.m with a limit of detection (LOD) of 1 CFU/mL, while the photothermal and colorimetric signals enable on-site measurement of total bacteria with a LOD of 5 CFU/mL. This biosensor exhibits the multiple signals, realizing the diversification of bacterial information output. Meanwhile, the three signals can realize the mutually support, thereby improving the accuracy of detection results. This work opens a new avenue for the simple, ultrasensitive and simultaneous quantification of both live and dead bacteria.

Features of High-Precision Photothermal Analysis of Liquid Systems by Dual-Beam Thermal Lens Spectrometry.

Thermal lens spectrometry is a high-sensitivity method for measuring the optical and thermal parameters of samples of different nature. To obtain both thermal diffusivity and absorbance-based signal measurements with high accuracy and precision, it is necessary to pay attention to the factors that influence the trueness of photothermal measurements. In this study, the features of liquid objects are studied, and the influence of optical and thermal effects accompanying photothermal phenomena are investigated. Thermal lens analysis of dispersed solutions and systems with photoinduced activity is associated with a large number of side effects, the impact of which on trueness is not always possible to determine. It is necessary to take into account the physicochemical properties and optical and morphological features of the nanophase and components exhibiting photoinduced activity. The results obtained make it possible to reduce systematic and random errors in determining the thermal-diffusivity-based and absorbance-based photothermal signals for liquid objects, and also contribute to a deeper understanding of the physicochemical processes in the sample.

Photothermal measurement of material properties for translucent thermal barrier coatings

In this study, a photothermal nondestructive method was proposed to measure the material parameters of semi-transparent or translucent thermal barrier coatings (TBCs). We derived a theoretical model for the photothermal signal from a two-layer semi-infinite material system with a translucent first layer after a pulse laser excitation. Its solution was verified by numerical solution. A data regression algorithm based on a least-squares fitting was used for the determination of the material parameters in the translucent first layer material. To verify this new method, an experimental system was set up with a pulse laser for thermal excitation and an infrared camera for image acquisition of the thermal emission transient from several translucent EBPVD TBC samples. The predicted coating thickness is consistent with the measured value by an optical microscope. The predicted thermal conductivity and optical attenuation coefficients in the absorption and emission band are found to be in good agreement with reference values.

Development of MnO2 nanosheets nanozyme-based colorimetric and photothermal dual-signal platform for monitoring alkaline phosphatase activity

Herein, a dual-signal biosensing platform for monitoring alkaline phosphatase (ALP) activity was developed. This platform combined the oxidase-mimicking activity of MnO2 nanosheets (NS) with the colorimetric and photothermal properties of oxidized 3,3′,5,5′-tetramethylbenzidine (oxTMB). MnO2 NS effectively catalyzed the oxidation of TMB to oxTMB, resulting in a color change from colorless to blue and a significant light absorption band at 652 nm. Meanwhile, oxTMB demonstrated pronounced photothermal properties, with the solution exhibiting a notable increase in temperature upon irradiation with an 808 nm laser. In the presence of ALP, 2-Phospho-L-ascorbic acid trisodium salt (AAP) was converted into L-ascorbic acid (L-AA), which then reacted with MnO2 NS. Consequently, MnO2 NS was inhibited from oxidizing TMB to oxTMB. Based on this principle, a dual-readout assay that integrated both colorimetric and photothermal signals for ALP detection was developed. The detection limits were 0.08 mU/mL for the colorimetric method and 0.12 mU/mL for the photothermal method. Furthermore, the platform was successfully applied to human serum samples, demonstrating its effectiveness in detecting ALP in complex biological matrices. The combination of colorimetric and photothermal responses enhanced both the accuracy and reliability of ALP detection, making this platform a promising tool for biomedical applications.

Construction of a Three-Dimensional-Printed Immunosensing Platform Based on Smartphone Photothermal Signal Integration.

The combination of the photothermal effect and immunoassay serves as a potent tool for crafting cost-effective and user-friendly biosensing systems. To ensure efficient light-to-heat conversion, we integrated three-dimensional-printed (3D printed) technology to devise a novel design. This design functions as the structural support for both the cell phone and laser probe, as well as a means for sample handling. The main body features a three-way cavity structure, securing the test sample at a fixed position to maintain consistent light distance and angle, thereby minimizing testing errors. Card slot insert facilitates precise sample positioning to ensure the adequacy of receiving light. The sample holder's wide front and narrow back design enables the accommodation of fixed samples while providing a broad field of view, with intervals therein effectively preventing cascading heat. Our design employs MB@MOF235 (methylene blue adsorbed by iron terephthalate) as the photothermal reagent, successfully enabling the detection of α-fetoprotein (AFP). The detection range spans from 0.01 to 50 ng/mL, with a lower detection limit (LOD) of 0.032 pg/mL. The detection method, combining simplicity, portability, and visualization, offers a reliable reference for furthering precision medicine toward personalized medicine. Meanwhile, to verify the method's accuracy electrochemical testing was conducted to support the proof using the electro-oxidizing activity of MB.

A Versatile Visual Molecular Imprinting-Driven Switchable Nanozyme Activity-Based Trimodal Assay and Logic Gate Circuits of Ethyl Carbamate.

Concerns regarding the hazard of the carcinogenic ethyl carbamate (EC) have driven attempts to exploit efficient, timely, straightforward, and economic assays for warning early food safety. Here, we proposed a novel molecularly imprinted polymer Co@MOF-MIP, with a high peroxidase (POD)-like activity and a bright blue fluorescence emission, to develop a versatile visual assay for colorimetric, fluorescent, and photothermal trimodal detection and logic gate outputting of EC. Briefly, the POD-like activity of Co@MOF-MIP made it to decompose H2O2 into ·OH for oxidizing colorless 3,3',5,5'-tetramethylbenzidine (TMB) into a blue oxTMB, resulting in a 660 nm irradiated photothermal effect and bursting the blue fluorescence of Co@MOF-MIP via inner filter effect, observing a decreased fluorescence signal together with an increased colorimetric and 660 nm irradiated photothermal signals. However, EC could specifically fill the imprinted cavities of Co@MOF-MIP to block the catalytic substrates TMB and H2O2 out of Co@MOF-MIP for further reacting with the inside catalytic center of Co2+, resulting in the transformation suppressing of TMB into oxTMB, yielding an EC concentration-dependent trimodal responses in fluorescence signal enhancement, colorimetric, and 660 nm irradiated photothermal signal decreases. Assisted by the portable devices such as smartphones and hand-held thermal imagers, a visual onsite portable trimodal analytical platform was proposed for EC fast and accurate detection with the low detection limits of 1.64, 1.24, and 1.78 μg/L in colorimetric, fluorescent, and photothermal modes, respectively. Interestingly, these reactive events could be programmed by the classical Boolean logic gate analysis to offer a novel promising avenue for the big data Internet of Things monitoring and warning early residual EC in a more intelligent, dynamical, fast, and accurate manner, safeguarding food safety.

CuS hollow nanocages with rough surface to enhanced photothermal property for ultra-sensitive detection of furazolidone metabolites

Signal tracers play a key role in the lateral flow immunoassay (LFIA) for improving sensitivity and signal output capability. Photothermal signal has sparked significant excitement in designing high-performance LFIAs. Herein, CuS hollow nanocages (CuS HNCs) were synthesized for building a dual signal LFIA. CuS HNCs show excellent photothermal conversion efficiency due to their unique morphology and superior localized surface plasmon resonance (LSPR) effect. Meanwhile, the hollow-cage structure endows CuS HNCs with high light absorption and suitable colorimetric property. Furazolidone (FZD) metabolite was used as a model target in the developed LFIA to demonstrate its superior comprehensive performances brought by CuS HNCs. The limit of detection is as low as 0.099 ng mL−1 (colorimetric mode) and 0.075ng mL−1 (photothermal mode), respectively. Furthermore, standard recovery test in honey and shrimp samples was performed and the recovery rates ranged from 86.33 % to 116.71 %. This study not only introduces a new type of nanolabel characterized by an abundance of high-energy hot carriers and pronounced thermal effects, enabling the development of exceptionally sensitive immunosensor platforms but also extends applications of hollow plasmonic photothermal material in the point-of-care (POC) diagnostic field.

Combined non-destructive evaluation of the damage precursors in fused silica optics

Combined non-destructive evaluation methods for fused silica’s damage precursors including UV photothermal weak absorption, ultrafast fluorescence, steady-state fluorescence, Raman spectroscopy, and stress distribution, are proposed to explain the damage mechanism from multiple perspectives. The correlation between each non-destructive characterization method and damage behaviors is simultaneously verified, in general, the damage threshold test of R on 1. The results have shown that regions with high photothermal absorption are accompanied by low damage thresholds, because the photothermal conversion process is associated with laser-induced damage. The damage threshold is also lower at locations of bright ultrafast fluorescence signals with a lifetime ranging from 1.2∼3 ns, as ultrafast fluorescence is associated with high densities of defects. A complementary relationship between the distribution of ultrafast fluorescence and the distribution of photothermal absorption signals is constructed. This indicates that the steady-state fluorescence cannot accurately evaluate the precursor’s damage performance. Furthermore, Raman spectroscopy is utilized to identify the structural changes in bond lengths and angles, as well as locations of damages coinciding with stress distribution.

Single 5-nm quantum dot detection via microtoroid optical resonator photothermal microscopy

Label-free detection techniques for single particles and molecules play an important role in basic science, disease diagnostics, and nanomaterial investigations. While fluorescence-based methods are tools for single molecule detection and imaging, they are limited by available molecular probes and photoblinking and photobleaching. Photothermal microscopy has emerged as a label-free imaging technique capable of detecting individual nanoabsorbers with high sensitivity. Whispering gallery mode (WGM) microresonators can confine light in a small volume for enhanced light-matter interaction and thus are a promising ultra-sensitive photothermal microscopy platform. Previously, microtoroid optical resonators were combined with photothermal microscopy to detect 250 nm long gold nanorods and 100 nm long polymers. Here, we combine microtoroids with photothermal microscopy to spatially detect single 5 nm diameter quantum dots (QDs) with a signal-to-noise ratio exceeding 104. Photothermal images were generated by point-by-point scanning of the pump laser. Single particle detection was confirmed for 18 nm QDs by high sensitivity fluorescence imaging and for 5 nm QDs via comparison with theory. Our system demonstrates the capability to detect a minimum heat dissipation of 0.75 pW. To achieve this, we integrated our microtoroid based photothermal microscopy setup with a low amplitude modulated pump laser and utilized the proportional-integral-derivative controller output as the photothermal signal source to reduce noise and enhance signal stability. The heat dissipation of these QDs is below that from single dye molecules. We anticipate that our work will have application in a wide variety of fields, including the biological sciences, nanotechnology, materials science, chemistry, and medicine.

Copper (II)-catalyzed polydopamine mediated photothermal sensors for visual quantitative point-of-care testing

BackgroundTemperature sensing is commonly used in point-of-care (POC) detection technologies, yet the portability and convenience of use are frequently compromised by the complexity of thermosensitive processes and signal transduction. Especially, multi-step target recognition reactions and temperature measurement in the reaction vessel present challenges in terms of stability and integration of detection devices. To further combine photothermal reaction and signal readout in one assay, these two processes enable to be integrated into miniaturized microfluidic chips, thereby facilitating photothermal sensing and achieving a simple visual temperature sensing as POC detection. ResultsA copper ion (Cu2+)-catalyzed photothermal sensing system integrated onto a microfluidic distance-based analytical device (μDAD), enabling the visual, portable, and sensitive quantitative detection of multiple targets, including ascorbic acid, glutathione, and alkaline phosphatase (ALP). The polydopamine nanoparticles (PDA NPs) were synthesized by the regulation of free Cu2+ through redox or coordination reactions, facilitating the transduction of distinct photothermal response signals and providing the versatile Cu2+-responsive sensing systems. Promoted by integration with a photothermal μDAD, the system combines PDA's photothermal responsiveness and thermosensitive gas production of ammonium bicarbonate for improved sensitivity of ALP detection, reaching the detection limit of 9.1 mU/L. The system has successfully achieved on-chip detection of ALP with superior anti-interference capability and recoveries ranging from 96.8 % to 104.7 %, alongside relative standard deviations below 8.0 %. Significance and noveltyThe μDAD design accommodated both the photothermal reaction of PDA NPs and thermosensitive gas production reaction, achieving the rapid sensing of visual distance signals. The μDAD-based Cu2+-catalyzed photothermal sensing system holds substantial potential for applications in biochemical analysis and clinical diagnostics, underscored by the versatile Cu2+ regulation mechanism for a broad spectrum of biomarkers.

Bimetallic Single-Atom Nanozyme-Based Electrochemical-Photothermal Dual-Function Portable Immunoassay with Smartphone Imaging.

Rapid and accurate detection of human epidermal growth factor receptor 2 (HER2) is crucial for the early diagnosis and prognosis of breast cancer. In this study, we reported an iron-manganese ion N-doped carbon single-atom catalyst (FeMn-NCetch/SAC) bimetallic peroxidase mimetic enzyme with abundant active sites etched by H2O2 and further demonstrated unique advantages of single-atom bimetallic nanozymes in generating hydroxyl radicals by density functional theory (DFT) calculations. As a proof of concept, a portable device-dependent electrochemical-photothermal bifunctional immunoassay detection platform was designed to achieve reliable detection of HER2. In the enzyme-linked reaction, H2O2 was generated by substrate catalysis via secondary antibody-labeled glucose oxidase (GOx), while FeMn-NCetch/SAC nanozymes catalyzed the decomposition of H2O2 to form OH*, which catalyzed the conversion of 3,3',5,5'-tetramethylbenzidine (TMB) to ox-TMB. The ox-TMB generation was converted from the colorimetric signals to electrical and photothermal signals by applied potential and laser irradiation, which could be employed for the quantitative detection of HER2. With the help of this bifunctional detection technology, HER2 was accurately detected in two ways: photothermally, with a linear scope of 0.01 to 2.0 ng mL-1 and a limit of detection (LOD) of 7.5 pg mL-1, and electrochemically, with a linear scope of 0.01 to 10 ng mL-1 at an LOD of 3.9 pg mL-1. By successfully avoiding environmental impacts, the bifunctional-based immunosensing strategy offers strong support for accurate clinical detection.

A highly sensitive dual-mode lateral flow immunoassay based on plasmonic hollow Ag/Au nanostars enhancing light absorption

The conventional lateral flow immunoassay (LFIA) based on gold nanoparticles (Au NPs) is limited by low sensitivity due to the insufficient brightness of Au NPs. To address this problem, noble metal nanomaterials with localized surface plasmon resonance (LSPR) and synthetic tunability are potential signal outputs for LFIA, which can achieve better optical properties by adjusting the preparation conditions. Herein, this study prepared the hollow silver/gold nano-stars (HAg/Au NSts) as LFIA signal output via the galvanic replacement method. HAg/Au NSts with anisotropic hollow alloy nanostructures exhibit a wide visible light absorption band and great NIR thermal conversion efficiency (η = 37.32 %), which endows them with enhanced colorimetric and photothermal signals. Further, we constructed a colorimetric-photothermal (CM-PT) dual-signal HAg/Au NSts-LFIA and chose staphylococcal enterotoxin B as the target analyte. The linear range of HAg/Au NSts-LFIA is 0.19–100 ng mL−1, and the limit of detection (LOD) is up to 0.29 ng mL−1 and 0.09 ng mL−1 in the colorimetric and photothermal modes respectively. Compared with the conventional Au NPs-LFIA, HAg/Au NSts-CM/PT-LFIA effectively improved the detection performance of LFIA. In addition, HAg/Au NSts-LFIA also showed satisfactory sensitivity (vLOD = 0.78 ng mL−1) and recovery (89.06–114.74 %) in milk and pork samples. Therefore, this work provides a new shape design idea for noble metal nanomaterials in biosensor applications.

Taking Photoacoustic Force into Account in Liquid-Phase Peak Force Infrared Microscopy.

The microscopic structure of the material's solid-liquid interface significantly influences its physicochemical properties. Peak force infrared microscopy (PFIR) is a powerful technique for analyzing these interfaces at the nanoscale, revealing crucial structure-activity relationships. PFIR is recognized for its explicit photothermal signal generation mechanism but tends to overlook other photoinduced forces, which can disturb the obtained infrared spectra, thereby reducing spectral signal-to-noise ratio (SNR) and sensitivity. We have developed a multiphysics-coupled theoretical model to assess the magnitudes of various photoinduced forces in PFIR experiments and have found that the magnitude of the photoacoustic force is comparable to that of the photothermal expansion force in a liquid environment. Our calculations show that through simple modulation of the pulse waveform it is possible to effectively suppress the photoacoustic interference, thereby improving the SNR and sensitivity of PFIR. This work aims to alert researchers to the potential for strong photoacoustic interference in liquid-phase PFIR measurements and enhance the performance of PFIR by clarifying the photoinduced forces entangled in the signals.

"Three-in-One": Ultrasensitive Lateral Flow Immunoassay Driven by Magnetic Enrichment and Photothermal Signal Amplification.

Conventional lateral flow immunoassay (LFIA) usually suffers from poor antimatrix interference, unsatisfactory sensitivity, and lack of quantitative ability for target analyte detection in food matrices. In response to these limits, here, multifunctional nanomaterial ZnFe2O4 nanoparticles (ZFOs) were developed and integrated into LFIA for powerful magnetic separation/enrichment and colorimetric/photothermal target sensing. Under optimum conditions, the detection for clenbuterol (CL) with magnetic enrichment achieves 9-fold higher sensitivity compared to that without enrichment and 162-fold higher sensitivity compared to that based on traditional colloidal golds. Attributing the improved performances of ZFOs, CL can be detected at ultralow levels in pork and milk with 10 min of immunoreaction time. The vLODs were 0.01 μg kg-1 for two modes, and the cutoff values of CL were about 5 and 3 μg kg-1, respectively. More importantly, the enrichment ZFO-mediated LFIA (ZE-LFIA) exhibits a similar limit of detection (LOD) in both buffer solution and food matrix, demonstrating a universal resistance to the food matrix. The multitudinous performance merits of this ZE-LFIA with high sensitivity, matrix tolerance, accuracy, and specificity have ensured a broad application potential for target detection of clenbuterol and can serve as an experience for other veterinary drug residues' detection.

Integrated gold nanorods-based dual-signal platform for accurate total antioxidant capacity assessment in food samples

Accurate assessment of Total Antioxidant Capacity (TAC) in food is crucial for evaluating nutritional quality and potential health benefits. This study aims to enhance the sensitivity and reliability of TAC detection through a dual-signal method, combining colorimetric and photothermal signals. Gold nanorods (AuNRs) were utilized to establish a dual-signal method duo to the colorimetric and photothermal properties. Fenton reaction can etch the AuNRs from the tips, as a result, a blue shift in the longitudinal LSPR absorption peak was obtained, leading to significant changes in color and photothermal effects, facilitating discrimination through both visual observation and thermometer measurements. In the presence of antioxidants, the Fenton reaction was suppressed or inhibited, protecting the AuNRs from etching. The colorimetric and photothermal signals were therefore positively correlated with TAC levels, enabling dual-signal detection of TAC. The linear range of AA was 4–100 μM in both colorimetry and photothermal modes, with detection limits of 1.60 μM and 1.38 μM, respectively. This dual-signal approach achieves low detection limits, enhancing precision and sensitivity. The method thus has the potential to act as a promising candidate for TAC detection in food samples, contributing to improved food quality and safety assessment.

A Programmable Microfluidic Paper-Based Analytical Device for Simultaneous Colorimetric and Photothermal Visual Sensing of Multiple Enzyme Activities.

New strategies for the simultaneous and portable detection of multiple enzyme activities are highly desirable for clinical diagnosis and home care. However, the methods developed thus far generally suffer from high costs, cumbersome procedures, and heavy reliance on large-scale instruments. To satisfy the actual requirements of rapid, accurate, and on-site detection of multiple enzyme activities, we report herein a smartphone-assisted programmable microfluidic paper-based analytical device (μPAD) that utilizes colorimetric and photothermal signals for simultaneous, accurate, and visual quantitative detection of alkaline phosphatase (ALP) and butyrylcholinesterase (BChE). Specifically, the operation of this μPAD sensing platform is based on two sequential steps. Cobalt-doped mesoporous cerium oxide (Co-m-CeO2) with remarkable peroxidase-like activities under neutral conditions first catalytically decomposes H2O2 for effectively converting colorless 3,3',5,5'-tetramethylbenzidine (TMB) into blue oxidized TMB (oxTMB). The subsequent addition of ALP or BChE to their respective substrates produces a reducing substance that can somewhat inhibit the oxTMB transformation for compromised colorimetric and photothermal signals of oxTMB. Notably, these two-step bioenzyme-nanozyme cascade reactions strongly support the straightforward and excellent processability of this platform, which exhibit lower detection limits for ALP and BChE with a detection limit for BChE an order of magnitude lower than those of the other reported paper-based detection methods. The practicability and efficiency of this platform are further demonstrated through the analysis of clinical serum samples. This innovative platform exhibits great potential as a facile yet robust approach for simultaneous, accurate, and on-site visual detection of multiple enzyme activities in authentic samples.

Study of the thermal diffusivity in low-response optical systems combining a thermal lensing approach with a standard addition method

Abstract Thermal lensing is a local effect produced by the incidence of a light beam that heats a part of an absorbent material. Mathematical modeling of this photothermal phenomenon allows the determination of the medium’s thermal diffusivity. A pumping-modulated laser (405nm) induces the thermal lensing effect, and a test laser (650nm) generates the photothermal signal measured as a function of the modulation. The thermal diffusivity is obtained from a curve fit of the signal (calibrated for ethanol). In this work, the thermal diffusion coefficients of low-absorbance nanoparticle suspensions are established. This was achieved through the application of a standard addition method. The added analyte, enhance the optical response of SiO 2 nanoparticle suspensions. Different aliquots of tartrazine (analyte) resulted in different values for the thermal diffusion of the samples. It was found that the experimental coefficients of this colloids agree with the theoretical model. Finally, a linear regression allowed to find the thermal coefficient in the zero concentration point.